Custom photo cases. - Nexus 4 Accessories

Hi everyone,
It's my first time on these forums and given the amount of useful information that is on here I hope someone can help me. I've searched but couldn't find what I was looking for so I apologise if it's already out there.
I'm looking for is a customised TPU or leather flip case that I can my own photo printed on. I have bought an N4 for my Wife and want it for her. I have found custom hard cases and skins but would prefer a soft rubber/TPU or leather style flip case to protect it from our kids.

You can add custom pictures on the back of the Ringke fusion. The sides and front lip are tpu
Sent from my Nexus 4 using Tapatalk 2

1slow4G said:
You can add custom pictures on the back of the Ringke fusion. The sides and front lip are tpu
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for that I'll have a look into the Ringke case.

Related

screen and case recommendations

Just bought an N4. There are a lot of comments here about various screen and body protectors. I prefer the Otterbox Commuter for my phones, but they don't make one for the N4. I'm considering the Rearth Ringke SLIM case and the Halo HD or Spigen SGP Ultra Crystal. Does this case look good on the N4? Does it offer good protection?
http://www.amazon.com/LF-White-Prem...e=UTF8&qid=1367761966&sr=8-8&keywords=nexus+4
http://www.amazon.com/Halo-Screen-P...e=UTF8&qid=1367761966&sr=8-6&keywords=nexus+4
http://www.amazon.com/SPIGEN-SGP-SG...id=1367763690&sr=1-11&keywords=nexus+4+screen
The SLIM cases will offer some minimal protection against bumps and dings on the back, sides and corners but the top and botton on the phone are left exposed. These cases are made for those who want minimal bulk not maximum protection. I have the black and white and they look good on the Nexus 4.
I don't use screen protectors as I never get a clean install and my OCD gets the better of me but when I did Spigen and BSE were my choices.
Because the N4 is glass all around, isn't more protection better? What's the equivalent of the Commuter series? Have you had any problems with scratches and dings with your SLIM case?
dhawk312 said:
Because the N4 is glass all around, isn't more protection better? What's the equivalent of the Commuter series? Have you had any problems with scratches and dings with your SLIM case?
Click to expand...
Click to collapse
The case offers more protection than a bare phone and being my phone is just a week old and I am careful with it so far so good. I also have a couple of cruzerlite TPU cases if I want a little more protection.
Get a bumper. The back is too sexy to be hidden under a case. Bumpers provide sufficient protection to prevent the back from cracking.
Sent from my Nexus 4 using xda premium
zephiK said:
Get a bumper. The back is too sexy to be hidden under a case. Bumpers provide sufficient protection to prevent the back from cracking.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Which bumper do you recommend then?
Sent from my SPH-L710 using xda app-developers app
dhawk312 said:
Which bumper do you recommend then?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Hmm there are only two choices to choose from.
1) Official LG Bumper: https://play.google.com/store/devic...ExMSwiZGV2aWNlLW5leHVzXzRfYnVtcGVyX2JsYWNrIl0.
I personally have this. It has its pros and cons.
Some of its pros are that... the buttons are AMAZING to use. It will make your normal buttons feel so much better because it has a "click" to it where other cases do not. Some of the cons are that it does slightly make your phone bulkier, and that there is a possible design flaw where the usb cracks. Google does refunds if this happens.
Alternatively, if its too pricey. You can give a try for one of the replicas which are of the same quality (XDA accessories has a whole thread on this).
http://www.amazon.com/Google-Bumper...Sleeve/dp/B00C7RTSQ6/ref=pd_rhf_gw_p_t_1_DQZC multiple colors.
2) Poetic Bumper http://www.amazon.com/Poetic-Border...qid=1367771724&sr=1-1&keywords=poetic+nexus+4
Pros: Not as bulky as LG bumper
Cons: might not be as pretty as the official one, no click on buttons.
Both are great at great prices (especially the replica for the lg bumper). Its hard to decipher accessories because you never get an opportunity to try them out in person before buying. You can check out videos on YouTube, I'm sure there are a bunch of reviews out there.
The mercury TPU case.
-Sent from Marino's Maxx-

Opinions on TPU cases

Hey guys,
I'm considering buying a TPU case for my N4. Which ones do you recommend and why? I'm also especially interested in how much width they add. The OEM bumper case makes the phone too big for my hands.
Sent from my Nexus 4 using xda app-developers app
jordonwii said:
Hey guys,
I'm considering buying a TPU case for my N4. Which ones do you recommend and why? I'm also especially interested in how much width they add. The OEM bumper case makes the phone too big for my hands.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I said that too when I first got my bumper and then tried it a second time and resold it again. Won a white OEM one and hasn't come off yet.
I suggest the Ringke Fusion, but you may not like fingerprints on the back of that. Also cruzerlite has some nice cases as well. Also Diztronic tpu cases are nice if you are looking for a plain jane tpu.
The Diztronic case is great. It barely adds any thickness to the phone. While not TPU, I'm also digging the Body Glove case. Laterally, it doesn't add much thickness, but it's a little beefier on the back which might be a good thing with the glass and all. Both cases have raised edges which allows you to put the phone face-down if that's ever a concern.
I have the Diztronic TPU on mine and my girls. She has dropped it numerous times and not a scratch on it.
Mercury 6$ case, it's nice as I have one for a note 2. The note 2 is more snug versus this one however, this one has lips on the sides to protect the screen.
Sent from my Nexus 4 using xda app-developers app
I must be the only one who thinks the diztronics tpu case is a pile if crap. Cutouts don't like up on either of the two I've had. Went in the garbage
I use the.bumper, and the body glove case when I am doing something where I need more protection
Sent from my Nexus 4 using Tapatalk 2
I have the this one: Ringke Fusion. It adds very little to the bulk of the phone, whilst protecting the back.
I also like the Mercury case ..the look and feel is great.
Sent from my Nexus 4 using xda premium
funky_snowman said:
I must be the only one who thinks the diztronics tpu case is a pile if crap. Cutouts don't like up on either of the two I've had. Went in the garbage
Click to expand...
Click to collapse
You must've had bad luck with it then.. the cutouts on mine are perfect. What I do dislike though are the buttons, which are a bit hard to press and feel mushy.
I still haven't seen a case that I like 100%. Every single one makes it either look a lot cheaper, adds too much bulk or doesn't offer enough protection. But.. well, nothing you can really do, I guess
I have the official bumper, rinke fusion, poetic borderline. I can say using Ringke fusion brings the feeling of a solid phone. Using the official bumper adds a width for the phone. In the poetic borderline i didn't feel any bulk at all. That's my experience about those cases. I consider the back design in choosing a case cause i wanna let others can see the beauty of N4.
dijonemon said:
I have the this one: Ringke Fusion. It adds very little to the bulk of the phone, whilst protecting the back.
Click to expand...
Click to collapse
Mine arrived this afternoon and I love it. Can't wait for my skin for the back to arrive so it can feel safe and look sexy.
Official Bumper, Diztronic, a two part mesh case, etc and my FAVORITE is the Cruzerlite Bugdroid case in Smoke. You can see Nexus through the back of the case, not much width added at all and with the Bugdroid pattern carved into the back it offers much needed slip out of the hand protection. Cut outs are perfect also.
I've only tried the diztronic and I highly recommend it. Doesn't look like anything special or nice but in terms of protection it works. I've dropped my phone many times with it on and no scratches or dents or anything. Also the cutouts on mine are perfect.. There is a whole thread on it here I believe. I do wish the beautiful back wasn't covered though.. ringke fusion might be better in that sense.
I've gone through a few cases and settled on this one. My fave case so far, offers great protection and fits over the iloome tempered glass screen protector, unlike the Ringke Fusion.
http://www.amazon.com/gp/product/B00A06Z41E/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1

Recommendation for the thinnest case

Hi everybody,
Soon Ill get my Nexus 4 and I'm looking for the thinnest rubber case available.
Can I get some recommendations please?
Im also looking for headset with controller to skip tracks, any suggestions?
Thanks,
Daniel.
NILLKIN super frosted shield case.
It rocks. amazing thin and really good quality .
http://www.aliexpress.com/item/NILLKIN-super-frosted-shield-case-for-LG-E960-Nexus-4-with-screen-protector-retailed-package-free/1243098324.html
If you mean TPU case (you said rubber case) I reccomend you this one:
http://www.ebay.com/itm/Diztronic-Matte-Back-Black-Purple-or-Pink-Glitter-TPU-Case-Cover-for-LG-Nexus-4-/261137354079
I have matte black and its very good. Not too thick and very good buttons feedback (volume +/- and on/off).
I have this TPU case from ebay. No complaints and its thin.
http://www.ebay.com/itm/181049607053
The Zero Lemon case
I Sent from my M-BBQ'd Anarchist N⁴
May not be what you wanted but Ringke Hybrid Fusion Case https://www.rearthusa.com/google-nex...id-fusion-case
I don't even notice mine except that I am no longer afraid of the phone slipping out of my hand. Dropped the phone once and it still works.
ahunter said:
May not be what you wanted butRingke Hybrid Fusion Case https://www.rearthusa.com/google-nex...id-fusion-case
I don't even notice mine except that I am no longer afraid of the phone slipping out of my hand. Dropped the phone once and it still works.
Click to expand...
Click to collapse
I can attest to it's durability. I've probably dropped the phone ten times at least and nothing has happened. Either I'm lucky or this case is amazing.
Sent from my Nexus 4 using xda app-developers app
Ive been thinking about this case. So the clear back is hard plastic and the black edges is TPU? How thick is the clear back? The computer renderings on their website makes the back appear too thick.
Sent from my SGH-M919 using Tapatalk
Can anybody share the thickness in comparison between a diztronic tpu, ringke slim and ringke fusion?
Sent from my Nexus 4 using Tapatalk

Slim case?

I need a very slim case. One that doesn't add much bulk, I already have tempered glass installed on it. Not too worried about protection. Slimmer/thinner than the spigen, Diztronic. Thank you in advance..
Sent from my SM-G900T using XDA Free mobile app
I just ordered a few cases so I will let you know when they come in. I am/was looking for the same.
JC
I ordered 2 of those 0.3mm Chineese cases at 1 dollar. If you do not want those look at Incipio/Spigen/Ringke Slim or Case Mate barely there
Bump
Sent from my SM-G900T using XDA Free mobile app
Here is what I use. I don't think you can get any slimmer than this.
[]Rinkge Slim Case S5
I also got the Rinkge slim case linked above. So far, so good. It adds very little bulk. I almost bought the Diztronic slim TPU case similar to what I used for 2 years on my S3, but decided against it because of how it looked. The Diztronic protected my old phone from many a fall and withstood the wear and tear of daily use. Heck, I'm selling my S3 with the Diztronic as an added feature. Before making my final decision I was torn between the Rinkge and the Spigen Slim Utra Fit case. I never tested the Spigen, but a friend had the Rinkge case and I liked what I saw. Nothing to say about protection and durability yet as I only have the case for two weeks. Would like to hear from folks that bought the Spigen Slim Ultra Fit case to compare notes.
I just got in a slim armor and a neo hybrid.
Both are great cases, neither overly bulky.
I honestly prefer the slim armor. The neo is just a thin plastic frame, outside edge coverage only, around a thin tpu skin direct to the phone.
The slim armor is marginally more bulky, yet it seems much more durable and protective.
The bonus of both cases is they are a super perfect fit and EASY to get in and out of the pocket of even tightish jeans. The buttons and charging port are easy access (better on the slim armor) and the case wont try to come off when you take it out of your pocket.
These things are a laser tight fit. I was going to go trident for my case as I did with my epic 4g touch....... but I don't think I need to yet.
Sent from my SM-G900P using XDA Free mobile app
I have the Ringke, it's ok but it has 0 sex appeal(our phone needs it, because ew). I can't deal with the Spigen, I can't believe they put 'Auto Focus' below the lense. It bothers me greatly. It's not a lauded feature so I don't need some cheese wording below my camera.
This case on Amazon has fair reviews, about to order it myself.
http://www.amazon.com/Samsung-Galaxy-Case-GreatShield-Packaging/dp/B00KFQAZRW#customerReviews
Anybody have the ringke slim dot view case that can speak on if it retains the blue dye from Blue jeans? Thinking about getting the white one but worried about it turning another color.
If anyone has pics that would be great.
I bought the Spigen Ultra Fit Black and I using tempered glass the phone looks great. I am happy with it. See the photos :thumbup:
Sent from my SM-G900F using XDA Free mobile app

Looking for a see-through rubber TPU case for Nexus 9 (think Spigen Ultra hybrid)

Hi everyone!
I've been searching for a Nexus 9 case for ages now but can't seem to find what I'm looking for the case I want is a Spigen Ultra hybrid like case with protection around the corners and a see through back of some sorts but I can't seem to find ANYTHING like it A complete see-through rubber case that would cover the corners would be perfect as well but the closest I could find was a KWmobile case on Amazon but it doesn't cover the corners and I think it's a hard plastic not TPU rubber :/ Anyone know where I could find a case like the Spigen Ultra Hybrid or something of that sort?? I don't want it to be a hard back :/
Many thanks everyone!
Sent from my Nexus 9 using XDA Forums
How about this but not Spigen? http://www.amazon.com/SUPCASE-Full-body-Protection-Unicorn-Protector/dp/B00ONRSSF0/ref=sr_1_1?s=wireless&ie=UTF8&qid=1436410089&sr=1-1&keywords=Nexus+9+case
http://www.amazon.com/gp/product/B00QLAXJNI
It fits pretty well, covers corners and is raised to protect screen, and looks nice IMO
https://drive.google.com/file/d/0B2nSHYc0TXd8ZGRxdnpqSjJZYUVCVzJtQ25HUnNfdUdPRTlR/view?usp=sharing
https://drive.google.com/file/d/0B2nSHYc0TXd8YkJFT1RIN0MzLW1MRmp3QkQzaXUxRVZHUmpV/view?usp=sharing
https://drive.google.com/file/d/0B2nSHYc0TXd8RDd0NG45aFBPV0JyeXB5bTJzSFRHbXlUWFZj/view?usp=sharing
ayoraider07 said:
http://www.amazon.com/gp/product/B00QLAXJNI
It fits pretty well, covers corners and is raised to protect screen, and looks nice IMO
https://drive.google.com/file/d/0B2nSHYc0TXd8ZGRxdnpqSjJZYUVCVzJtQ25HUnNfdUdPRTlR/view?usp=sharing
https://drive.google.com/file/d/0B2nSHYc0TXd8YkJFT1RIN0MzLW1MRmp3QkQzaXUxRVZHUmpV/view?usp=sharing
https://drive.google.com/file/d/0B2nSHYc0TXd8RDd0NG45aFBPV0JyeXB5bTJzSFRHbXlUWFZj/view?usp=sharing
Click to expand...
Click to collapse
Exactly what I was looking for!! Thanks allot!
Sent from my Nexus 9 using XDA Forums

Categories

Resources