AIO Kernel MOD by axetilen & iba21 (AROMA)
v1.2.3 is gonna be the final version because I'm gonna get the S3 on FEB 18
Requirements:
- PYD-X kernel v4.1.9 or higher
- SebastianFM kernel v1.5.0, 1.5.1 or v1.5.2
- Grogg kernel is also supported but not fully functional -> Run MOD for PYD-X kernel
- SENSE-BASED ROM which supports init.d folder
- S-off and rooted phone ~~~> it is very hard to deal with S-on users
- The latest 4EXT Touch Recovery
- AOSP/AOKP/CM10 are NOT supported
FEATURES:
- Select kernel type or Powerful Kernel Reset
- Selectable OnDemand Configurations: Battery Save, Balance & Performance
+ These configurations change OnDemand behaviors
+ Battery Save: less responsive but save more battery life without significantly afftecting system performance
+ Balance: default configuration of the kernel
+ Performance: more responsive. System will be very smooth despite low frequencies
- Separated CPU max frequencies
- Selectable CPU frequencies: Max and Min
- Selectable CPU Second Phase Frequencies
- 3 choices of 3D GPU max clock
- 11 choices of Undervoltage: -25mV, -50mV, -75mV, -87.5mV, -100mV, -9%, -9% plus, 11%, -112.5mV and -125mV
- Zram on/off
- Delete some (not all) leftovers of other kernels which may affect this kernel (Powerful Kernel Reset)
- Some Tweak Scripts
- Add 4ext Tweaks script
- Fast Engine Flush script by zeppelinrox
- Adrenaline Boost v3 by ImmaWind
- Automatically zipalign apks on boot for better free ram and performance
- Selectable i/o scheduler
- vsync control
- fastcharge control (for PYD & Sultan kernels)
- Notification LED time-out control (only for PYD)
- 64, 128 and 256mb softswap options
DISCLAIMER:
- Softswap can degrade your internal memory. Use it with your own risk
- v1.2.3 could increase the boot time of Sense 3.6 ROMs by 30 seconds -> not sure but if you have this problem, revert to v1.2.2 or open init.post_boot.sh and delete this line: sleep 30
GENERAL NOTES:
- This is NOT a kernel, so you have to flash the kernel before flashing this MOD
- SebastianFM kernel doesnt support Screen Off Frequency
- If you set any value of swap or zram -> minfree will be set automatically to Medium -> no minfree menu
- If you choose No swap or Zram -> minfree menu will appear
- 9% and 9% plus: they have likely the same standby battery life as -75 but worse with heavy usage. So they are stable for almost all devices, more stable than 62.5 and 75mV and much better than -50. If your devices cannot handle -62.5 and -75, -9% and -9% plus are the best choices for you
- I'm neither a DEV nor a pro in this field, so having mistakes is inevitable. Please forgive me
- You tell me if you experience a bug…
NOTE FOR VIPERS ROM USERS & KERNEL TUNER USERS:
- ViperS has Venom Tweaks which is able to apply some settings and overwrite some of the scripts in the AROMA
- Please open Venom Tweaks and set the same as what you choose in the AROMA menu
- Kernel Tuner could also apply its settings and overwrite my scripts. Please check this too
PYD-X KERNEL NOTE:
- fsync control has been removed in the latest test build v4.1.9
- if you're using 4.1.9, in fsync menu, choose anything you want because it is useless
How to execute Fast Engine Flush to optimize your phone???
- Open Android Terminal or some other apps which have terminal feature (Android & System Tuner, Script Manager,...)
- Type:
Code:
su
flush
How to execute Adrenaline Boost to optimize your phone after some days of using???
- NOTE: This may consume a bit more battery because system has to rebuild cache after running this script
- Open Android Terminal or some other apps which have terminal feature (Android & System Tuner, Script Manager,...)
- Type:
Code:
su
boost
KNOWN BUG:
- You tell me
@Credit:
- Special thanks: iba21: please give credit to him if you think this mod is useful. Click here to see his MOD for Bricked kernel
- SebastianFM: DEV of SebastianFM Kernel
- XxXPachaXxX: DEV of PYD-X Kernel
- Ghost: for helping us
- zeppelinrox
- ImbaWind
- msavic123
Changelogs:
v1.2.3:
- Move all the scripts to init.post_boot.sh -> all the stuffs should be changed correctly
- Updated Powerful Kernel Reset: delete Pimp My Rom script to avoid any conflict
- Added Capacitive buttons backlight brightness configuration
- Change OOM ADJ grouping to the default values
v1.2.2:
- Removed BFQ i/o scheduler from the AROMA menu
- Fixed the corrupted thermald.conf -> fix thermald control
- Broght minfree menu back to all swap settings
- Updated zipalign bin
- Added Adrenaline Boost Tweak Script (Thanks ImbaWind)
- Added 2 more ondemand configurations for PYD kernel: Balance+ & Performance+
- Tweak script: Keep Launcher in Memory -> prevent launcher from realoading (a.k.a Bulletproof Launcher)
v1.2.1:
- Added 1 tweak to avoid lag after some days of using (drop_caches)
- Fixed the missing minfree option: Let the ROM manage itself (Thanks xlx890121)
- Editted wrong description in delete.sh
v1.2: (Removed due to my mistake - Changelog is still useful for v1.2.1)
- Removed some unnecessary scripts
- Added 64, 128 and 256mb softswap options
- Extended Powerful Kernel Reset list with Grogg kernel leftovers
- Removed NO_NORMALIZED_SLEEPER which may cause Deep Sleep issue
- Added 1 minfree option: Let the ROM manage itself
- Fixed 1 typo in minfree description [RIP my English, I wrote "discription" in the AROMA changelog instead of "description"]
v1.1 for PYD & SebastianFM kernels
- Rewrite scripts - more organized
- Remove Sultan kernel from AROMA menu
- Fixed some wrong codes: battery calibration script not installed
- Removed Fsync control
- Fixed bug for separated CPU control
- Fixed Black screen issue from v1.0
v1.0 AIO mod for 3 kernels:
- Rewrite scripts
- Support 3 kernels in 1 MOD
- Added some more tweaks
- Added Powerful Kernel Reset in AROMA Menu
- Removed SManager & SMWidget apks (download from Play Store for free)
- Updated Powerful Kernel Reset for more trash cleaned up
- Added new features: LED time-out, fastcharge, KSM, msm_mpdecision, etc...
- Updated AROMA installer to v2.56
- Automatically clean up .thumbnails cache on boot
- v2.4:
+ Removed Read Ahead Cache Size config in AROMA menu -> set as 2048kb by default
+ Added some tweaks in init.post_boot.sh (Huge thanks to DarkSense DEVs)
+ Auto zipalign all apks on boot
+ Added -112.5 & -125mV - classic style in AROMA (Chuck Norris!!!)
+ Fixed the bug that 4ext tweak script is not applied
+ Moved vsync script to 69force
- v2.3:
+ Removed 4ext Tweaks in AROMA menu -> Installed by default
+ Added max frequency control for each CPU
+ Changed default minfree in AROMA menu to "Optimal I"
+ Changed a little "Battery Save - Ondemand configuration" for a bit better battery life
- v2.2:
+ Added minfree configuration with 7 choices
+ Move logcat disabling script to 69force
+ Changed some default options in AROMA menu
+ Removed Kernel Sleep Normalization in init.post_boot.sh
- v2.1:
+ Changed permission of system files to default
+ Added vsync configuration
+ Updated 4ext tweaks
+ Updated AROMA version (thanks iba21)
+ Updated Powerful Kernel Reset for cleaning more leftovers
- v2.0:
+ Re-arrange UV values in order and add -11% to the list
+ Add some scripts in init.post_boot.sh to save a bit more battery
+ Selectable OnDemand Configurations: Battery Life, Balance, Performance & Performance Plus (OMG! Fast like hell!!!)
+ Add 4ext Tweaks for better system performance
+ BUG: mmcblk1 read ahead cache size hasn't been changed correctly yet but it doesn't have any effect on your device (100% SAFE!!!)
- v1.7
+ SD cache size is expanded to Read Ahead (add 2 more settings) - Thanks noodles2k
+ Move GPU, Read Ahead & i/o scheduler from init.qcom.post_boot.sh to 69force
+ Add options to select Read Ahead cache size & i/o scheduler
+ Add options to install Battery Auto-Calibration Script (seo) & Logcat Disable
- v1.6:
+ fix the problem that -87.5mV uV doesnot work (Thanks noodles2k for the report)
+ Change some codes -> Hopefully the MOD would work correctly at the first time (Thanks iba21)
- v1.5:
+ Finally fix bug that GPU clock isnot changed
+ cfq and 2048 SD cache is set as default
- v1.4: It has all features of Powerful Kernel Reset
+ Fix a small mistake that max GPU clock arenot changed
+ Add some information after flashing
+ Change permissions of some scripts
+ Include thermald and mpdecision
- v1.3: (noticeable version)
+ Change 69force script to a better one (!!!)
+ Delete more leftovers of other kernels (hopefully all!)
+ Fix some wrong codes which don't delete leftovers
+ Remove 98swap (Yank555) - Hard Swap & Soft Swap from leftover list
+ Remove down_differential from init.qcom.post_boot.sh and let system choose the value itself
- v1.2:
+ Add cfq i/o schedulder & 2048kb SD cache size (read_ahead_kb)
* Yes: install cfq and 2048kb
* No: default settings: deadline & 128kb
- v1.1:
+ Include init.qcom.post_boot.sh (removed min CPU freq)
+ Include init.post_boot.sh
+ Include thermald.conf which is missing in some ROMs - modified for better temperature management
- v1.0: initial release
DOWNLOAD:
v1.2.3
Dropbox
Mirror - xda attachment
Wanna give me a cup of coffee
Click DONATE TO ME below my account info
v1.2.2
Dropbox
Mirror - xda attachment
v1.2.1
Dropbox
Mirror - xda attachment
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Powerful Kernel Reset - MOD Remover for Sense-based ROM (non-AROMA) - [UPDATED 23 JAN]
- The same cleaning features as kernel MOD => remove leftovers from other kernels
- Include thermald and mpdecision
- Include stock init.qcom.post_boot.sh, init.post_boot.sh and modified thermald.conf
Download Powerful Kernel Reset - MOD Remover
(Changed a little bit for more information - Nothing new - The same links)
Dropbox
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ADDITIONAL MODs:
SoftSwap
- Requirement: a lot of internal space
- 64mb with swappiness = 60
- 128mb with swappiness = 90
- 256mb with swappiness = 100
- Softswap uninstalling script
- Automatically create swap file if it is missing on boot
NOTE:
- You would see a low storage message -> ignore it and increase your space by moving apps to sdcard and use Clean Master to clean up trash
- If you want to change swap size, flash the uninstalling script first and then flash the new swap zip
To check Swap status, open android terminal and type:
Code:
free -m
DISCLAIMER:
- Softswap can degrade your internal memory. Use it with your own risk
Battery Auto-Calibration Script by seo (from ARHD ROM - non-AROMA)
- Automatically delete batterystats.bin after unplugging your charger
- Increase battery percentage accuracy
- Minimize the situation that your device reaches 100% but actually not that much => last longer
- IT DOESNOT IMPROVE BATTERY LIFE BUT HELP YOU TO HAVE A MORE ACCURATE BATTERY STATISTIC + AND THE SITUATION IN THE THIRD BULLET POINT (100%...)
- Some people will say it is useless at all but I think it is still useful in some cases => That's why this is included in ARHD or Virtuous Inquisition ROMs
Download Battery Auto-Calibration Script
DropBox
Mediafire
Logcat Disable (non-AROMA): modified from ViperS ROM
- Delete dev/log/main on every boot
- Save some battery life (not significant)
- If you are a normal user and rarely report bug to ROM Devs, this MOD is useful. However, if you are a tester, this MOD will delete logcat, so you don't have that file to send to the Devs
Download Disable Logcat
DropBox
Mediafire
Re-enable Logcat - Disable Logcat MOD remover (non-AROMA)
- Remove Disable Logcat MOD if you don't want it anymore
Download
Dropbox
Mediafire
Thanks for sharing! Hard!
Here are a couple of lines I find useful -
This changes the read ahead for the emmc and sd block devices as well as the virtual sd one.
Code:
echo "4096" > /sys/block/mmcblk0/queue/read_ahead_kb
echo "4096" > /sys/block/mmcblk1/queue/read_ahead_kb
echo "4096" > /sys/devices/virtual/bdi/179:0/read_ahead_kb
This changes the io scheduler for emmc and sd, SebFM has noop, cfq and deadline.
Code:
echo "noop" > /sys/block/mmcblk0/queue/scheduler
echo "noop" > /sys/block/mmcblk1/queue/scheduler
This dims the capacitive buttons, in SebFM changing their brightness the usual way doesn't work.
Code:
echo 2 > /sys/class/leds/button-backlight/currents
This mounts swap and sets swappiness. I find it better than Yank's as it's nice and simple and doesn't waste time and cpu.
Code:
swapon /dev/block/mmcblk1p3
echo 70 > /proc/sys/vm/swappiness
noodles2k said:
Here are a couple of lines I find useful -
This changes the read ahead for the emmc and sd block devices as well as the virtual sd one.
Code:
echo "4096" > /sys/block/mmcblk0/queue/read_ahead_kb
echo "4096" > /sys/block/mmcblk1/queue/read_ahead_kb
echo "4096" > /sys/devices/virtual/bdi/179:0/read_ahead_kb
This changes the io scheduler for emmc and sd, SebFM has noop, cfq and deadline.
Code:
echo "noop" > /sys/block/mmcblk0/queue/scheduler
echo "noop" > /sys/block/mmcblk1/queue/scheduler
This dims the capacitive buttons, in SebFM changing their brightness the usual way doesn't work.
Code:
echo 2 > /sys/class/leds/button-backlight/currents
This mounts swap and sets swappiness. I find it better than Yank's as it's nice and simple and doesn't waste time and cpu.
Code:
swapon /dev/block/mmcblk1p3
echo 70 > /proc/sys/vm/swappiness
Click to expand...
Click to collapse
I have already had:
Code:
echo "2048" > /sys/devices/virtual/bdi/179:0/read_ahead_kb
echo "cfq" > /sys/block/mmcblk0/queue/scheduler
echo "cfq" > /sys/block/mmcblk1/queue/scheduler
I will consider your advice
Can you explain more about scheduler backlight and swapiness? I think cfq is better than deadline and noop
Thanks
Thanks for you hard work. Will check this thing out ASAP!
Glad you got your own thread.
Nice little mod this, latest 1.6 seems to be working as expected.
As i will be flashing new viper soon anyway I might have a bash at some higher frequency and see if I can crack 50fps in nenamark 2
Sent from my SuperSensation.
ViperS ROM 1.1.0.
Sebastian OC Kernel 1.5.2
Anker battery.
I have an issue with what you've written on Logcat Disabling.
Your way (via a script) does not save or improve battery life in any way, it just deletes the log on every boot. If its disabled within the kernel (ie that actual logcat service is disabled) then it would save some battery life, but as ERD Hacre said in one of his kernel threads, battery life saving on that one wont be much, tbh I'd be amazed if it turned out to save more than 1 minute of battery life.
Jonny said:
I have an issue with what you've written on Logcat Disabling.
Your way (via a script) does not save or improve battery life in any way, it just deletes the log on every boot. If its disabled within the kernel (ie that actual logcat service is disabled) then it would save some battery life, but as ERD Hacre said in one of his kernel threads, battery life saving on that one wont be much, tbh I'd be amazed if it turned out to save more than 1 minute of battery life.
Click to expand...
Click to collapse
ok. I'll fix my word
thanks you for heading up
ObiWan_C said:
Thanks for you hard work. Will check this thing out ASAP!
Click to expand...
Click to collapse
http://smiliesftw.com/x/glock836_roll_eyes.gif
you are welcome... :silly:
it was so difficult to write the code of aroma, of the script, and the fixes.. :crying:
Finally you have started you own thread
good job on this mod bro\
I've been using this since v.1.2
Oh so u started Ur thread finally.. congrats bro for coming up with Idea.. now it wud b easier for everyone, to talk abt mod n kernel seperately ;P
Sent from my HTC Sensation 4G using Tapatalk 2
When i set:
MAXFREQ: 1566 MHz
MINFREQ 192 MHz
Second Pharse: 918 MHz
3D GPU: 267
No UV
No ZRAM
I got error: mount() expects 3 args, got 4
Edit:
Redownloaded mod and now it's ok!
New thread* Somewhere in post add whether it is CM10/Sense Etc
Itll save you a lot of questions that you will probably have in a few minutes
Sounds good!
Is it needed to flash Sebastian last Kernel before or only to flash the mod? Sorry if this is astupid question but never played arround much with kernels. I am a skinner only
Dic3ptor said:
Is it needed to flash Sebastian last Kernel before or only to flash the mod? Sorry if this is astupid question but never played arround much with kernels. I am a skinner only
Click to expand...
Click to collapse
yes first flash SebastianFM 's kernel and the mod
rzr86 said:
yes first flash SebastianFM 's kernel and the mod
Click to expand...
Click to collapse
Thank you. I think its logical but better to ask to much as to less. Thank you again!
EDIT: Another question. What a your settings til now and which settings are the best maybe? Can someboddy post some experience here?
Dic3ptor said:
Thank you. I think its logical but better to ask to much as to less. Thank you again!
EDIT: Another question. What a your settings til now and which settings are the best maybe? Can someboddy post some experience here?
Click to expand...
Click to collapse
in my device:
maxfreq - 1782mhz
minfreq - 192mhz
secondface freq - 810mhz
UV - -9% plus
no zram
3d gpu clock - 320mhz
so far no problems
rzr86 said:
in my device:
maxfreq - 1782mhz
minfreq - 192mhz
secondface freq - 810mhz
UV - -9% plus
no zram
3d gpu clock - 320mhz
so far no problems
Click to expand...
Click to collapse
Thats my setup and til now no probelms! Phone stay cool when using mobile network and Games! Great thing. Thanks to Thread operator for this mod.
maxfreq - 1566mhz
minfreq - 192mhz
secondface freq - 810mhz
UV - -9% plus
no zram
3d gpu clock - 276mhz
Do i have to use setcpu to set the setting after i flashed this mod? Thanks
Verstuurd van mijn GT-P7500 met Tapatalk
saigon66 said:
Do i have to use setcpu to set the setting after i flashed this mod? Thanks
Verstuurd van mijn GT-P7500 met Tapatalk
Click to expand...
Click to collapse
No you don't need setcpu. You can set your favorite setting when installing the mod. Aroma installer will ask for each settings you can do. It's very easy to set it up.
Gesendet von meinem HTC Sensation with Beats Audio mit DroiDevs Premium
CPU and STORAGE Tweaks app :
Free Version Link : https://play.google.com/store/apps/details?id=com.largical.stools
Donated Link : https://play.google.com/store/apps/details?id=com.largical.stools_paid
The Application require a few android permission, to elevate the performance of the device.. we don't save any user data's..
CPU and STORAGE Tweaks need superuser (a.k.a root) and also custom kernel.
With CPU and STORAGE Tweaks you can easily manage these tweaks:
- BLD - BLN - BLX
- CPU Governor - Custom Voltage
- Deepidle - Liveoc
- Max/min scaling frequencies - Touchwake
- CMLed - IO Scheduler
- Fast charge toggle - Change CPU Governor, I/O Scheduler and Clock Speed
- Not Killable Processes feature
- Customize SD read -Linux Kernel informations
- CPU Informations - Memory Informations - Disk Informations
Tools: Custom shell command, Wipe cache+dalvik cache, Flash kernel or recovery (img files), Clean residual files, Optimize DBs
NOTE:
If something bad happened mails us [email protected].. We will fix the problem.. PLEASE DON'T RATE 1* WITHOUT SEEKING OUR HELP....
Please click THANKS button to move head with my future works..........
I compiled this kernel using linaro 4.8 toolchain from official LGE-D295 kernel sources and adding these some features:
Added CPU underclock to 249 & 192 Mhz (default CPU freqs is 0.3-1.2 GHz, so you need to set up underclock in Kernel Auditor)
Added support for FAST CHARGE function (disabled by default - for enable use Fast Charge)
Default governor changed to ondemand
Default I/O sheduler changed to CFQ
Added new CPU governors: interactive, conservative, pegasusQ
Added some new I/O shedulers: BFQ, SIO, SIOPLUS, FIOPS, FIFO, VR, ZEN.
Information:
Developer: Nikita Pro Android
Tester: kubarek777 (4pda)
Kernel version: 3.4.10
Device model: D295
ROM: STOCK 4.4.2
Installation:
1. Download and put to storage: >>>LINK<<< (v1.0)
2. Go to recovery and wipe cache.
3. Flash downloaded .zip and reboot.
4. Reboot again!
5. This is all.
To set up CPU frequency and another kernel parametres use: Kernel Auditor
Source code: https://github.com/NikitaProAndroid/android_kernel_lge_msm8610_l70pds/tree/master
Nikita Pro Android said:
[/HIDE]
Installation:
1. Download and put to storage: []>>>LINK<<< (v1.0)[]
2. Go to recovery and wipe cache.
3. Flash downloaded .zip and reboot.
4. Reboot again!
5. This is all.
Click to expand...
Click to collapse
The link not available, new link please..
Hi I just want to share my customised Stock ROM for S duos 2
Based on XXUANK5 and is JB......
install over STOCK ROM preferred but you can install over custom rom too
Disclaimer: Flash this rom at your own risk. I will not be held responsible for a dead phone from using this rom so read the instructions many times if possible.
Features:
-root
-busybox
-init.d support (no tweaks installed yet)
-audio tweak
-performance tweaks
-bloats removed
-deodexed
-semi-material design
-addded more wallpapers
-customizable statusbar label
-removed AM/PM
-custom bootanimation support
-battery bar
-data speed meter (with dual meter option)
-power saving mode
-cpu stats&settings
-autostarts
-4-way reboot menu
-build.prop tweaks in settings
-profile pic in settings
-partition info
-double-tap to sleep on statusbar
-hardware information
-1% battery increment & charging animation
Tools needed
7-zip
TWRP(other custom recoveries should work)
common-sense.zip(most important)
PREVIEW :
https://m.youtube.com/watch?v=5NPXTgDxFXI
INSTALLATION:
your phone should have at LEAST 50% remaining battery or to be sure plug it to a power source!
1. Download Rom
https://mega.nz/#!wN4gHQqI!POjhSqr04...y1tvkeWFST3nzg
or
http://www.mediafire.com/download/0wd128f26q6ewur/MilkTea.zip
2. Copy the "MilkTea.zip" to your sdcard
3. Put your phone to recovery mode (vol up + home + power buttons)
4. Flash the ROM (This will reset your phone! backup your important data before flashing!)
Done!
Note: In case you don't like auto tint in systemui, simply flash this zip again through recovery http://www.mediafire.com/download/8ycafksoziokfca/SystemUI_notinted.zip
BUGS:
1.google play services sometimes force closes
SOLUTION - go to settings - application manager - all, look for google play services and select Clear Data
2.Setupwizard force closes in some installation(but mine worked fine tho)
SOLUTION - Flash this zip through recovery http://www.mediafire.com/download/0dk9gu0v5qai5ag/setupwizard_has_stopped_fix.zip
Credits to:
John Christopher Mediavillo Llaguno ( For Developing the rom)
MAAADR
Underground
S Duos-2 PHILIPPINES Groups
Samsung Galaxy User Worldwide
OsniNO (For Uploading the rom)
BIG Thanks to:
Eboy Basit
Gurpreet Singh
Droidbuster
Klark Luis Peralta
DaRk-L0rD
BOOTMGR
Jawaad_S
Hadi Hartono
B16h22
Morningstar
DaRk-L0rD
Cyanogen Team
Custom Kernel
Use this at your own risk. I wont be responsible for any damage of your phone.
THis will only work in stock 4.2.2 ROM or any stock based ROM.
Kernel Features
1) Some cpu governor added.
2) Some I/O scheduler added.
3) Multi core scheduler support.
4) Fastcharge enabled.
5) LZO compression method.
Cpu governors
1) Intelliactive
2) hotplug
3) smartassV2
4) conservative
5) ondemand
6) powersave
7) interactive
8) performence
I/O Schedulers
1) noop
2) deadline
3) cfq
4) zen
5) vr
6) sio
7) sioplus
Default cpu gov = intelliactive
Default I/O scheduler = sio
You can change the governor and scheduler by going to settings - developer-options - cpu settings.
Recovery flashable Kernel link :http://www.mediafire.com/download/5515gwwe8fu51b1/blackhorse_kernel_flashable_through_recovery.zip
-credit goes to Yasin Arefin for his great kernel
Original Forum:http://forum.xda-developers.com/android/development/kernel-samsung-gt-7582-gt-7580-t3093976
Dont forget to hit the thanks button..!!
Reserved
El unico bug que enconré fue que la aplicación "Google play services" se cierra :cyclops:
furtadoag said:
El unico bug que enconré fue que la aplicación "Google play services" se cierra :cyclops:
Click to expand...
Click to collapse
go to settings - application manager - all, look for google play services and select Clear Data
Very nice ROM - very nice colours - something like material design
I change notification tile colour in white (in notification panel) because it's remind me on Lollipop :$
I really miss text under quick settings (Wi-Fi, GPS, Bluetooth) and i really would like to see it again in next version of rom
GOOGLE PLAY SERVICE FIX (WORK FOR ME, NO MORE FORCE CLOSES
(Unistall Google Play Services with Link2SD or some similar application, and open this link (Google Play Services on Google Play Store) ( https://play.google.com/store/apps/details?id=com.google.android.gms&hl ) with Google Play and install again Google Play Services
Thanks very much for this nice rom
Plz make recent screen like lollipop... Card stack effect
riteshsaxena said:
This rom is developed by John Christopher Mediavillo Llaguno
Hi I just want to share my customised Stock ROM for S duos 2
Based on XXUANK5 and is JB......
install over STOCK ROM preferred but you can install over custom rom too
Disclaimer: Flash this rom at your own risk. I will not be held responsible for a dead phone from using this rom so read the instructions many times if possible.
Features:
-root
-busybox
-init.d support (no tweaks installed yet)
-audio tweak
-performance tweaks
-bloats removed
-deodexed
-semi-material design
-addded more wallpapers
-customizable statusbar label
-removed AM/PM
-custom bootanimation support
-battery bar
-data speed meter (with dual meter option)
-power saving mode
-cpu stats&settings
-autostarts
-4-way reboot menu
-build.prop tweaks in settings
-profile pic in settings
-partition info
-double-tap to sleep on statusbar
-hardware information
-1% battery increment & charging animation
Tools needed
7-zip
TWRP(other custom recoveries should work)
common-sense.zip(most important)
PREVIEW :
https://m.youtube.com/watch?v=5NPXTgDxFXI
INSTALLATION:
your phone should have at LEAST 50% remaining battery or to be sure plug it to a power source!
1.Download all these files and put them in one folder
http://www.mediafire.com/download/gl59z94fbf63z5n/MilkTea.part1.rar
http://www.mediafire.com/download/2gkoplyicn6pp9m/MilkTea.part2.rar
http://www.mediafire.com/download/os15pgsa9vxpg4o/MilkTea.part3.rar
http://www.mediafire.com/download/unad94y688ga4sg/MilkTea.part4.rar
http://www.mediafire.com/download/qe2htbbe2obat1d/MilkTea.part5.rar
2. Using 7-zip, extract "MilkTea.part1.rar", you will get "MilkTea.zip" after extract
3. Copy the "MilkTea.zip" to your sdcard
4. Put your phone to recovery mode (vol up + home + power buttons)
5. Flash the ROM (This will reset your phone! backup your important data before flashing!)
Done!
Note: In case you don't like auto tint in systemui, simply flash this zip again through recovery http://www.mediafire.com/download/8ycafksoziokfca/SystemUI_notinted.zip
BUGS:
1.google play services sometimes force closes
SOLUTION - go to settings - application manager - all, look for google play services and select Clear Data
2.Setupwizard force closes in some installation(but mine worked fine tho)
SOLUTION - Flash this zip through recovery http://www.mediafire.com/download/0dk9gu0v5qai5ag/setupwizard_has_stopped_fix.zip
Credits to:
John Christopher Mediavillo Llaguno ( For Developing the rom)
MAAADR
Underground
S Duos-2 PHILIPPINES Groups
Samsung Galaxy User Worldwide
BIG Thanks to:
Eboy Basit
Gurpreet Singh
Droidbuster
Klark Luis Peralta
DaRk-L0rD
BOOTMGR
Jawaad_S
Hadi Hartono
B16h22
Morningstar
DaRk-L0rD
Cyanogen Team
Custom Kernel
Use this at your own risk. I wont be responsible for any damage of your phone.
THis will only work in stock 4.2.2 ROM or any stock based ROM.
Kernel Features
1) Some cpu governor added.
2) Some I/O scheduler added.
3) Multi core scheduler support.
4) Fastcharge enabled.
5) LZO compression method.
Cpu governors
1) Intelliactive
2) hotplug
3) smartassV2
4) conservative
5) ondemand
6) powersave
7) interactive
8) performence
I/O Schedulers
1) noop
2) deadline
3) cfq
4) zen
5) vr
6) sio
7) sioplus
Default cpu gov = intelliactive
Default I/O scheduler = sio
You can change the governor and scheduler by going to settings - developer-options - cpu settings.
Recovery flashable Kernel link :http://www.mediafire.com/download/5515gwwe8fu51b1/blackhorse_kernel_flashable_through_recovery.zip
-credit goes to Yasin Arefin for his great kernel
Original Forum:http://forum.xda-developers.com/android/development/kernel-samsung-gt-7582-gt-7580-t3093976
Dont forget to hit the thanks button..!!
Click to expand...
Click to collapse
SIR
YOU SAID extract "MilkTea.part1.rar"...
What i Want To do With part 2,3,4,5
Nobody here to replay...
yasikst said:
Nobody here to replay...
Click to expand...
Click to collapse
Just download file from this link - http://www.4shared.com/rar/cAPNqKbVba/MilkTea.html.After - ( password = gregfijo) extact with Winrar and you will get file "MilkTea.zip"
SDUOS2 said:
Just download file from this link - http://www.4shared.com/rar/cAPNqKbVba/MilkTea.html.After - extact with Winrar and you will get file "MilkTea.zip"
Click to expand...
Click to collapse
Ok Thx
---------- Post added at 04:04 PM ---------- Previous post was at 04:00 PM ----------
sduos2 said:
just download file from this link - http://www.4shared.com/rar/capnqkbvba/milktea.html.after - extact with winrar and you will get file "milktea.zip"
Click to expand...
Click to collapse
can i flash this using twrp
yasikst said:
Ok Thx
---------- Post added at 04:04 PM ---------- Previous post was at 04:00 PM ----------
can i flash this using twrp
Click to expand...
Click to collapse
I think you can, i flash with CWM and everything is allright
The Rom works without any bugs.
Very nice. Thank u for this rom. :thumbup:
don't know password
I have download the ROM from 4share from SDOUS2 Link but when I extract the rar file then it ask for password so tell me your password......???
Sahadev Rathor said:
I have download the ROM from 4share from SDOUS2 Link but when I extract the rar file then it ask for password so tell me your password......???
Click to expand...
Click to collapse
Sorry, i forget that is password protected
Here is - (password = gregfijo)
riteshsaxena said:
common-sense.zip(most important)
Click to expand...
Click to collapse
what did you mean ??
Bro. Can you send me link of changed white colour notification tiles. And then card stack swip effect like other lollipop rom.
bug
When the notification panel is full with notification then it cannot swip up........so I use back key.....
Hi, my baseband version is XXUANL1 & i have flashed CMW recovery will this rom work??
riteshsaxena said:
This rom is developed by John Christopher Mediavillo Llaguno
Hi I just want to share my customised Stock ROM for S duos 2
Based on XXUANK5 and is JB......
install over STOCK ROM preferred but you can install over custom rom too
Disclaimer: Flash this rom at your own risk. I will not be held responsible for a dead phone from using this rom so read the instructions many times if possible.
Features:
-root
-busybox
-init.d support (no tweaks installed yet)
-audio tweak
-performance tweaks
-bloats removed
-deodexed
-semi-material design
-addded more wallpapers
-customizable statusbar label
-removed AM/PM
-custom bootanimation support
-battery bar
-data speed meter (with dual meter option)
-power saving mode
-cpu stats&settings
-autostarts
-4-way reboot menu
-build.prop tweaks in settings
-profile pic in settings
-partition info
-double-tap to sleep on statusbar
-hardware information
-1% battery increment & charging animation
Tools needed
7-zip
TWRP(other custom recoveries should work)
common-sense.zip(most important)
PREVIEW :
https://m.youtube.com/watch?v=5NPXTgDxFXI
INSTALLATION:
your phone should have at LEAST 50% remaining battery or to be sure plug it to a power source!
1.Download all these files and put them in one folder
http://www.mediafire.com/download/gl59z94fbf63z5n/MilkTea.part1.rar
http://www.mediafire.com/download/2gkoplyicn6pp9m/MilkTea.part2.rar
http://www.mediafire.com/download/os15pgsa9vxpg4o/MilkTea.part3.rar
http://www.mediafire.com/download/unad94y688ga4sg/MilkTea.part4.rar
http://www.mediafire.com/download/qe2htbbe2obat1d/MilkTea.part5.rar
2. Using 7-zip, extract "MilkTea.part1.rar", you will get "MilkTea.zip" after extract
3. Copy the "MilkTea.zip" to your sdcard
4. Put your phone to recovery mode (vol up + home + power buttons)
5. Flash the ROM (This will reset your phone! backup your important data before flashing!)
Done!
Note: In case you don't like auto tint in systemui, simply flash this zip again through recovery http://www.mediafire.com/download/8ycafksoziokfca/SystemUI_notinted.zip
BUGS:
1.google play services sometimes force closes
SOLUTION - go to settings - application manager - all, look for google play services and select Clear Data
2.Setupwizard force closes in some installation(but mine worked fine tho)
SOLUTION - Flash this zip through recovery http://www.mediafire.com/download/0dk9gu0v5qai5ag/setupwizard_has_stopped_fix.zip
Credits to:
John Christopher Mediavillo Llaguno ( For Developing the rom)
MAAADR
Underground
S Duos-2 PHILIPPINES Groups
Samsung Galaxy User Worldwide
BIG Thanks to:
Eboy Basit
Gurpreet Singh
Droidbuster
Klark Luis Peralta
DaRk-L0rD
BOOTMGR
Jawaad_S
Hadi Hartono
B16h22
Morningstar
DaRk-L0rD
Cyanogen Team
Custom Kernel
Use this at your own risk. I wont be responsible for any damage of your phone.
THis will only work in stock 4.2.2 ROM or any stock based ROM.
Kernel Features
1) Some cpu governor added.
2) Some I/O scheduler added.
3) Multi core scheduler support.
4) Fastcharge enabled.
5) LZO compression method.
Cpu governors
1) Intelliactive
2) hotplug
3) smartassV2
4) conservative
5) ondemand
6) powersave
7) interactive
8) performence
I/O Schedulers
1) noop
2) deadline
3) cfq
4) zen
5) vr
6) sio
7) sioplus
Default cpu gov = intelliactive
Default I/O scheduler = sio
You can change the governor and scheduler by going to settings - developer-options - cpu settings.
Recovery flashable Kernel link :http://www.mediafire.com/download/5515gwwe8fu51b1/blackhorse_kernel_flashable_through_recovery.zip
-credit goes to Yasin Arefin for his great kernel
Original Forum:http://forum.xda-developers.com/android/development/kernel-samsung-gt-7582-gt-7580-t3093976
Dont forget to hit the thanks button..!!
Click to expand...
Click to collapse
Hi, my baseband version is XXUANL1 & i have flashed CMW recovery will this rom work??
usmaniqbal15 said:
Hi, my baseband version is XXUANL1 & i have flashed CMW recovery will this rom work??
Click to expand...
Click to collapse
Yes .. ofcorse.. I am Also XXUIANL1 ... you can flash it... but clear chache and Dalvik before flashing
---------- Post added at 01:06 AM ---------- Previous post was at 01:01 AM ----------
I have Battery Leaking Problem
Bugs
My battery is going down very fasly..how can i fix it??...
In the rom is fully light colours... and i cant see text in light colour some where . Like Copying multiple using My Files Only seeing the symbols of copy and move delete etc...
But i like the rom very much.. smooth and very soft
I installed it. pretty good . but please release update for following bugs.
1) when notification bar is full then you can not swipe it up to close.
2) when changing wallpaper it ask for for which sim you want to apply wallpaper. thats insane. :/
EVERYTHING ELSE IS AWESOME <3 LOVING THIS ROM.
About AnyKernel:
AnyKernel is a template for an update.zip that can apply any kernel to any ROM, regardless of ramdisk. -Koush
The concept of AnyKernel has been around for awhile, (originally by Koushik Dutta/ClockworkMod,) which allowed a device-specific kernel zImage to be flashed over device-specific ROM and use the ramdisk that came with the ROM to reduce the chance of any issues arising from the custom kernel pairing.
Jelly Bean:
Jellybean kernel can used to all Jellybean based ROM like AOSP, MIUI, Lewa, Etc
3.4.5 Jelly Bean kernel by @kirito9:
Features:
1) Added Governers
2) Added Double tap to wake
3) Added Sweep to wake
4) Many more
Link:
https://mega.nz/#!S4cAzY7Q!Mxr6zwbTUnbpH3QZA8jhOlgWh6WIQketaiJ08Ci7G3M
3.4.5 OverClocked Jelly Bean kernel by @chijure:
Features:
1) Based on the STOCK Source OT_4015D_20140610.tar.xz from Alcatel
2) Toolchain: Built with GCC 5.2 toolchain from Linaro
3) Linux: 3.4.5
4) CPU OC: Up to 1.4GHz
5) Thunder Sonic Sound Control Engine
6) Thunder Charge Fast Charge Driver
7) Thunder Quake Engine 1.0 - Vibration Intensity Controller for MTK vibrators
8) Swap
9) KSM: Kernel Same-page Merging enabled
10) Dynamic management of dirty page writeback
11) Dynamic Fsync: Faux123's Dynamic File Sync v1.5
12) Sweep2wake
13) Doubletap2wake
14) Lowered swappiness (60 -> 70)
15) Optimized AES and SHA1 routines for ARM cpu architecture
16) Optimized SLUB memory allocator
17) Enabled arch power
18) Disabled CRC check in MMC for 30% extra performance with IO
19) Block:
•Added SIO IOScheduler
•Added BFQ IOScheduler
•Added fiops scheduler
20) Disabled Gentle fair sleepers
21) NOATIME and NODIRATIME
22) Dynamic management of dirty page writebacks
23) Mali:
•GPU cache Optimizations
•Increase L2 cache max read size
•Disable state tracking
•Reduce GPU utilization timeout
•Increase kernel memory buffer size
24) Additional Governors:- SmartassV2
25) Additional I/O Schedulers:
•NOOP
•BFQ
•FIOPS (by default)
•SIO (SImple Ondemand)
Link:
https://mega.nz/#!C99z3JQR!7ECpzlgKzjWSY11ayCAbqLw-tIzRlHlv9PyZOxStu6I
KitKat:
KitKat kernel can used to any KitKat ROM such as AOSP, MIUI, CM 11. This kernel also used in Lollipop ROM such as CM 12.1 and CM 12.1 Based ROM. Also used in Marshmallow ROM such as CM 13.0 and CM 13.0 based ROM and AOSP 6.0.1 ROM. This not used in MTK based 5.1 Lollipop ROM
3.4.113 OverClocked KitKat kernel by @getakgt1:
Features:
1) Upstreamed to 3.4.113
2) OverClocked to 1.4GHZ
Link:
https://mega.nz/#!3pl2FJqR!zD4UnHbt16CVqsot3uqULTaANCWW4FK4ubmyKO5NwNM
Instructions:
1) Download any kernel zip
2) Place it in SDCard
3) Reboot to recovery
4) Flash Zip
5) Reboot to system
6) Done
Credits:
1) @kirito9
2) @chijure
3) @getakgt1
4) Team Dev Pop
5) GETAKGT1
6) Team Panther
7) @osm0sis
8) @Koush