[Q] Factory reset & wiped P3113, won't boot - Galaxy Tab 2 Q&A, Help & Troubleshooting

I was having a problem where my storage was disappearing and I couldn't find the cause. I did a "power button/volume down" boot, only to get stuck on the Samsung logo splash screen long enough to use up over half the battery power. Following advice I found elsewhere on this site, I did a power button/volume up boot, then chose "factory reset/data wipe" from the menu.
Following directions, I pressed the power button when that was done, only to be stuck on the Samsung splash screen again. Can anyone tell me how to get this thing so I can use it again?
Galaxy Tab 2 7-inch screen
originally Android 4.2.2
NOT rooted but probably will be if I can ever use it again

misterdoe said:
I was having a problem where my storage was disappearing and I couldn't find the cause. I did a "power button/volume down" boot, only to get stuck on the Samsung logo splash screen long enough to use up over half the battery power. Following advice I found elsewhere on this site, I did a power button/volume up boot, then chose "factory reset/data wipe" from the menu.
Following directions, I pressed the power button when that was done, only to be stuck on the Samsung splash screen again. Can anyone tell me how to get this thing so I can use it again?
Galaxy Tab 2 7-inch screen
originally Android 4.2.2
NOT rooted but probably will be if I can ever use it again
Click to expand...
Click to collapse
Do you have the stock recovery on it still? If not, just wipe everything and flash a new ROM in recovery.
If yes, then I'd say use Odin to flash back to stock and start over. You've already wiped your user data so you'd have nothing to lose by restoring to stock.
It's super easy using Odin. You'll just need to find a download of the stock.tar to put into Odin to flash. I'm sure there is one around here somewhere.

better but maybe not good
Apparently it was just taking its sweet time. About 20 minutes after I posted, I was at the "device ready for use" screen. Any idea what could cause over 3gb of storage to dwindle away to nothing?
I bought the tablet in September 2012 and had no storage issues fron then until about two weeks ago, and I was constantly adding and deleting programs without issue. After a week of low-storage warnings I did a factory reset from within settings, which gave me 3.4GB of space after Google restored all my apps. That was only this past SUNDAY. What eats up gigabytes of storage in four days without any assistance from me? I intend to root this thing but I need to know just what to be on the lookout for. I had McAfee AV Mobile on it, and that found no issues (must reinstall pronto).
Any guidance anyone can give would be greatly appreciated. I want to restore my apps but one of them could be the culprit...

Related

[Q] [Help] Stuck in boot on Google

Alright. This is a 100% stock Nexus S- nothing "development" wise was done to the device, no system tools installed that could cause issues, basically nothing but basic apps loaded on the device.
It just started today. I was working on my bf's Vibrant (another, more successful story) and grabbed my Nexus and hit the power button and it did not turn the screen back on. Holding the power button down did not reboot the device, and none of the buttons would light up or function.
So, I pulled the battery. Now every time I try to boot, it hits the "Google" screen and stays put. I left it alone for 5 minuets hoping it would finish booting and nothing. The soft buttons will light up, and if I touch them they register the touch but it does not help the phone to boot.
I do know that the phone was basically dead right before this happened, and at first I thought it was just dead. However, its been on the charger for at least 30 minuets- which should have given it enough of a charge to boot up, and still nothing.
What could cause this issue?
I did install a couple of new applications today, and I know the market updated a bunch of them but they're all apps that I've had on several phones (minus the two new ones today) and have never had an issue with any of them. The two new ones I downloaded were OS Monitor, and a 2G/3G toggle for hopes of improving some battery life.
But those are the only two things I've done differently. I've only been using the phone for a week but I haven't had any problems at all, before this.
Now- if worst comes to worst I can seem to get into the bootloader, and through that, stock recovery. So I can try to do a factory reset and wipe cache but without a backup I really kinda hope thats a last resort.
Please help, and let me know if you need any more information.
Thank you!
I understand that you're fully stock which I assume means you have a locked bootloader (everything I say from here on out assumes as such)? First, I'm going to also assume that you didn't update to 2.3.3? If not, then follow the steps in this guide to boot into a custom recovery and from there go to backup and restore and do a NANDroid backup. Now go to mounts and storage and mount USB storage (or whatever its called, don't have my phone right here). Plug your phone into your comp and copy over whatever you'd rather not lose from your SDcard (just in case you have to wipe). Now download the 2.3.3 update from here and put it on the root of your SD card. Now go back and flash this. Reboot and see if you're golden. If so, great, if not try a factory reset.
If that doesn't work go through the steps again to boot into a custom recovery, you might have to unlock your bootloader and wipe all your data (again) and restore your backup and try doing a factory reset with that. Don't worry about unlocking the bootloader, it can be relocked with a simple command and it won't wipe anything to relock it.
Here is the command just in case:
Code:
fasboot oem lock
I got all the way to having clockwork recovery booted up on the phone, but nothing would mount. Everything gave me an error, and factory reset froze...
I don't think there is anything I can even do from here, is there?

Noob question - white screen

i've searched high and lo, been reading up on this forum for awhile now, reading the tutorials, etc. i must now hang my head in shame. managed to root my phone, put android revolution ROM on it, yay go me. decided i wanted to restore back to previous ROM. couldn't boot into bootloader via vol - and power, so i used ROM manager. went into backup/restore and picked a previous version. rebooted phone and now it hangs on the white HTC screen. i can take my battery out and put it back in and it will charge my phone. i think this might be my mistake, the battery was yellow when i tried all this. but it's been charging for awhile now, and still nothing. when i try to turn it on or the vol- and power it gets stuck on the white screen and is no longer charging. i've looked and looked and seen some suggestions of booting into recovery, etc. but i can't for some reason boot into anything. i'm not sure if i'm doing something wrong or what. any help or suggestions would be greatly appreciated.
ok, when i take the sd card out, it boots just fine, so what would my next step be?
Haha....you didnt wipe your device clean before restoring from your backup!
Remove the battery and place it back in, hold the bottom volume button and lock button...you should boot into Hboot(white screen also)
give it like 20 seconds because it will search for a file and select the recovery option by scrolling using the volume keys.
factory reset phone and go into advanced-wipe dalvik-cache
now install any rom or any backup!
You must do this for every ROM and every restoring of a backup...
thank you for your response, but i corrected my mistake, and wiped everything, but the backups i was trying to go back too still didn't work. still got stuck on the screen. i was however able to flash the ROM i had, but it's very basic, and nothing like what i flashed from it originally.

Stuck at "erasing" when doing a factory reset?

Anyone else had issues performing factory resets? My Nexus 5 seems incapable of completing it. So far I have tried doing a factory reset from the settings menu 4 times. Every single time it locks up on the erasing step. I don't mean it takes a little longer. I have let it sit for almost half an hour and the little android robot sits there taunting me.
Every time I have had to manually go into the bootloader and sideload a factory image, which works fine.
Any ideas why this problem is occurring? Faulty memory maybe?
Same issue here, phone is getting nice and warm but the little robot just sits there twiddling his antennae. Forced restart either normally or into recovery mode lands me right back on the erasing screen, looks like nothings going to happen unless I intervene another way. Any ideas?
Try pushing the system.img using fastboot. Might be best to start over and do a clean install.
Have you tried doing a factory reset in recovery instead?
Sent from my Nexus 5 using Tapatalk
Same problem
I have the same problem with the loop at the erasing screen. It will not go into recovery so that I can fix it. I tried flashing the Stock Rom again but no use. Please help me or at least give me some pointers what to try next.
jizkidjnr said:
Same issue here, phone is getting nice and warm but the little robot just sits there twiddling his antennae. Forced restart either normally or into recovery mode lands me right back on the erasing screen, looks like nothings going to happen unless I intervene another way. Any ideas?
Click to expand...
Click to collapse
martinancevski said:
I have the same problem with the loop at the erasing screen. It will not go into recovery so that I can fix it. I tried flashing the Stock Rom again but no use. Please help me or at least give me some pointers what to try next.
Click to expand...
Click to collapse
I have the same problem
I'm sure you wait a long time...but if not, mine probably took 10-15 minutes to finish...
Sent from my Nexus 5 using xda app-developers app
i have the same problem
What is your recovery? Version # also? How did you root? <--- this goes to the rest of you guys too because it seems like its happening to more than one person.
Follow this: Maybe flash the stock recovery found in here http://forum.xda-developers.com/showthread.php?t=2513701
fastboot flash recovery C:/image-hammerhead-krt16m/recovery.img
^^ the command
edit: on second thought start over.
lpforte said:
Anyone else had issues performing factory resets? My Nexus 5 seems incapable of completing it. So far I have tried doing a factory reset from the settings menu 4 times. Every single time it locks up on the erasing step. I don't mean it takes a little longer. I have let it sit for almost half an hour and the little android robot sits there taunting me.
Every time I have had to manually go into the bootloader and sideload a factory image, which works fine.
Any ideas why this problem is occurring? Faulty memory maybe?
Click to expand...
Click to collapse
hello
I have the same exact problem
I'm completely stock and I want to reset all so I do factory reset from menu setting, backup & reset
And since, my nexus stucked in "erasing...."
I have tried flashing factory image according to this guide, succeeded, but then still stucked in android logo with endless progress bar (but this time without "erasing....")
Need help how to restore it
All I want is to factory reset
How did you actually sideload factory image?
thanks
iori said:
hello
I have the same exact problem
I'm completely stock and I want to reset all so I do factory reset from menu setting, backup & reset
And since, my nexus stucked in "erasing...."
I have tried flashing factory image according to this guide, succeeded, but then still stucked in android logo with endless progress bar (but this time without "erasing....")
Need help how to restore it
All I want is to factory reset
How did you actually sideload factory image?
thanks
Click to expand...
Click to collapse
ADB sideload: place the rom you want to flash in the fastboot folder and in the phones recovery select adb sideload, then on the pc in cmd type: adb sideload namerom.zip and it will start flashing.
gee2012 said:
ADB sideload: place the rom you want to flash in the fastboot folder and in the phones recovery select adb sideload, then on the pc in cmd type: adb sideload namerom.zip and it will start flashing.
Click to expand...
Click to collapse
thanks
but i finally found out that the stock recovery was somehow corrupted after factory reset
then I unlocked the bootloader and flashed TWRP recovery, and voila! my device booted normally
Nexus 5 hung at reset
iori said:
hello
I have the same exact problem
I'm completely stock and I want to reset all so I do factory reset from menu setting, backup & reset
And since, my nexus stucked in "erasing...."
I have tried flashing factory image according to this guide, succeeded, but then still stucked in android logo with endless progress bar (but this time without "erasing....")
Need help how to restore it
All I want is to factory reset
How did you actually sideload factory image?
thanks
Click to expand...
Click to collapse
Exactly the same problem here. Nexus 5 running 4.4.2 kept powering off randomly roughly once a day. Attempted a factory reset and it got stuck at erasing. Having unlocked the bootloader and following the steps to unlock and reboot, I have a progress bar with the animated android icon, apparently stuck at the same stage, but without the "erasing" caption.
As far as I'm concerned, I can nothing with the phone at present short of taking it back, though they'll likely take issue with my attempts to rectify myself
mannschaftpag said:
Exactly the same problem here. Nexus 5 running 4.4.2 kept powering off randomly roughly once a day. Attempted a factory reset and it got stuck at erasing. Having unlocked the bootloader and following the steps to unlock and reboot, I have a progress bar with the animated android icon, apparently stuck at the same stage, but without the "erasing" caption.
As far as I'm concerned, I can nothing with the phone at present short of taking it back, though they'll likely take issue with my attempts to rectify myself
Click to expand...
Click to collapse
I'll add that I've also tried the Nexus Root Toolkit v1.8.0 to flash stock. Appears to go fine, recreating the file system and loading software, then as soon as it gets to the "erasing cache" step it just sits there for hours and makes no progress.
I know I probably shouldn't promote toolkits but you can always try this. Seems to have worked for a lot of people.
http://forum.xda-developers.com/showthread.php?t=2513937
Sent from The Deathstar
Same thing happened to me yesterday. My N5 is rooted, running stock rom and recovery. I had some corrupted app date showing in Titanium that I could not remove that were causing a Play store issue for me. I backed up my phone with TB and ran a factory reset in settings. The phone was stuck on the 'erasing' screen for maybe 20 minutes, so I put the phone in fastboot and from there back into recovery. This took me back to the 'erasing' screen to my dismay. I put the phone down and started searching for a solution online, but then I noticed after about 7 minutes the erase process had finally finished on its own and the phone rebooted normally again.
Based on what others are saying in this thread it appears the factory reset process via settings or stock recovery can hang sometimes. If you power off, start the phone in fastboot and select recovery again, I'm guessing the factory reset process restarts and hopefully it will then work properly the next time, like it did for me.
Well when I did a factory reset from settings, it took nearly 20-25 minutes to finish. The next time I did a reset, it completed within 10 minutes
I guess this problem occurs randomly.
Be patient
My guess is that you just need to be patient -- my device took nearly 45 minutes to reset. It seems to me that the time required is proportional to either the amount of data or the number of files you have on the device. My device had a mix of large files (such as musics and photos) and many many small files (sensor data log files), so it's hard for me to say which of those contributed more to the long reset time.
Based on what others are saying in this thread it appears the factory reset process via settings or stock recovery can hang sometimes. If you power off, start the phone in fastboot and select recovery again, I'm guessing the factory reset process restarts and hopefully it will then work properly the next time, like it did for me.
Click to expand...
Click to collapse
This worked for me too. On the initial 'Return to factory defaults' it got stuck for about 45 minutes. I then follow the advice above:
- Put the N5 in Fastboot by pressing: Vol. Up + Vol. Down + Power
- Select: Recovery and press on Power to proceed
- Phone reboots, still into the 'Androidman' but it seems that the 'Return to factory defaults' also restarts.
- Wait about 10 minutes and the Phone powers down automatically. Upon startup you enter the 'Initial configuration menu' so the factory reset has been completed.
Still stuck on Erasing screen, running out of options
Hello,
I am a newbie with zero developer knowledge and received my Nexus 5 in the mail yesterday. I liked the phone specs and that is the only reason I got it. I left it alone while it charged up and the first thing I did once it was finished was perform a Factory Reset (it was a "like new" phone so I just wanted to be safe) and have been stuck on the Erasing screen ever since. Pressing Vol- and Power button does take me to the bootloader screen, however, any option I choose by pushing the power button, such as Recovery Mode, sends me back to the Erasing screen. Pushing Vol+, Vol-, and Power shuts the phone off completely. Holding the Power button down does nothing more than restart the phone into the Erasing screen. I have also let the phone die twice and as soon as it has enough juice to come back on, it goes straight to the Erasing screen. Everything on the phone is stock and it is completely unrooted. The bootloader screen also indicates it is unlocked. I have attempted to flash it as per instructions I have found on here but I am unable to download the stock factory images. It gets to about 90% before the install fails and I have tried to install three times already. I do have the 15 Second ADB installed, however. I assumed the install of the factory images failed because I don't have WiFi and I'm running completely off of limited 3G data (I live in the middle of no where with no high speed internet to speak of). So in lieu of all that I have attempted, is there ANYTHING at all that can be done to get the phone off of this Erasing screen? Or do I just need to try and return it because it's useless at this point? I did at first let the process run but it's now been 24 hours stuck on this Erasing screen with no improvement. I'm fairly certain it runs KitKat 4.4.0.

Kyocera Rise soft bricked. Suggestions?

Hello everyone. I am an old member, seeing as I registered almost four years ago, but I guess either your database was refreshed and it lost my username, or I only lurked. So, as the title suggests I have one of those lowly, inexpensive, down right cheap Kyocera phones. Here is what I have figured out so far. I was able to root it using Kingroot. That went splendidly, though because of my over adventurousness I decided to swap some apps out. I added a new launcher to the /system/app folder and wanted to upgrade the com.android.settings.apk with one from a newer build. This phone (was) running Android 4.0.4 Kyocera release r77 build date 2013. Apparently Kyocera loves to lock the bootloader so if I was able to spin a custom system rom I wouldn't be able to flash it. Another thing which discovered was upon boot up the system checks the integrity of app the system apps. If one of them fails the check it will not boot the system fully. I was able to recover the stock boot/recovery/system roms from a thread on here, but I seem to be stuck in a soft brick loop. One thing that another thread said, the thread that had the rom images, it said that you could used ADB to flash the roms to the phone. Thing is, when I boot the phone it restarts, and if I put it into recovery mode (press and hold volume down plus power for ten to fifteen seconds) the only options I have are "reboot system now", "wipe data/factory reset", "wipe cache partition." There is no "flash update from sd card" or wipe dalvik cache option. As I have said before, I could try to flash the rom to it using adb but I believe that wiping the system partition unset the USB debugging setting. When I connect it to my computer windows device manager notices the kyocera removable device for a second then as the phone reboots it goes away. Setting it into recovery mode does not make it show up in windows. Is there any way I can flash the stock rom onto it? Any android sdk or adb trick I can use that can boot it into some recovery mode? I was trying to see if I can get it to boot into download mode but seeing as it has soft keys and not a physical home button I do not know if I can manage that. I was thinking that maybe they tied one of the physical keyboard buttons to the home button but I have yet to uncover that one. Any help would be appreciated.
Zestypanda said:
Hello everyone. I am an old member, seeing as I registered almost four years ago, but I guess either your database was refreshed and it lost my username, or I only lurked. So, as the title suggests I have one of those lowly, inexpensive, down right cheap Kyocera phones. Here is what I have figured out so far. I was able to root it using Kingroot. That went splendidly, though because of my over adventurousness I decided to swap some apps out. I added a new launcher to the /system/app folder and wanted to upgrade the com.android.settings.apk with one from a newer build. This phone (was) running Android 4.0.4 Kyocera release r77 build date 2013. Apparently Kyocera loves to lock the bootloader so if I was able to spin a custom system rom I wouldn't be able to flash it. Another thing which discovered was upon boot up the system checks the integrity of app the system apps. If one of them fails the check it will not boot the system fully. I was able to recover the stock boot/recovery/system roms from a thread on here, but I seem to be stuck in a soft brick loop. One thing that another thread said, the thread that had the rom images, it said that you could used ADB to flash the roms to the phone. Thing is, when I boot the phone it restarts, and if I put it into recovery mode (press and hold volume down plus power for ten to fifteen seconds) the only options I have are "reboot system now", "wipe data/factory reset", "wipe cache partition." There is no "flash update from sd card" or wipe dalvik cache option. As I have said before, I could try to flash the rom to it using adb but I believe that wiping the system partition unset the USB debugging setting. When I connect it to my computer windows device manager notices the kyocera removable device for a second then as the phone reboots it goes away. Setting it into recovery mode does not make it show up in windows. Is there any way I can flash the stock rom onto it? Any android sdk or adb trick I can use that can boot it into some recovery mode? I was trying to see if I can get it to boot into download mode but seeing as it has soft keys and not a physical home button I do not know if I can manage that. I was thinking that maybe they tied one of the physical keyboard buttons to the home button but I have yet to uncover that one. Any help would be appreciated.
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
If you can access your recovery it is already a good thing, try first to wipe data and see how it goes.
nilac said:
Hi and thank you for using XDA Assist
If you can access your recovery it is already a good thing, try first to wipe data and see how it goes.
Click to expand...
Click to collapse
So, I boot into recovery and I do the wipe data/factory reset then the wipe cache partition for good measure and it still halts on boot. Same thing. Boot, kyocera logo, virgin mobile boot splash, then it halts where it would normally go into android. Then it reboots. Rinse repeat.
Any suggestions? I sorta need the information off the phone.

Galaxy S7 G930U Unlocked stuck in boot loop - already flashed successfully but no fix

I'm really hoping you guys can help me out here. This is an S7 I bought from a Best Buy when I visited the US in 2017, and I got the Unlocked version so I would be able to use it back in my home country. Unfortunately, this is the second time I've had trouble with it in a span of 4 months and the first time it was a hardware problem and ended up quite expensive to get fixed.
Today I was using my phone normally when I decided to use the Google instant translation to translate something on my computer screen. That caused my phone to freeze, restart, and then tell me I was using an unauthorized flash and it was going to be locked, or something like that. Even after restarting a few more times, the phone would never get past that screen. I proceeded to factory reset/cache reset and from then on the phone just got stuck in a boot loop.
I learned that the fix would be to flash the phone. After a lot of work I found the G930UUESACSI1-20190930144640 firmware (the XAA version, for Unlocked) and successfully used Odin 3.13 at the Download Mode screen to flash my phone. It then restarted, went back to the blue screen, started installing some updates, when it was 100% it restarted again. Unfortunately, the loop remained. Galaxy S7 logo first, then the Samsung logo, then it just repeats.
I have also tried turning the phone off with the Recovery screen shut down option (since I can't seem to be able to turn it off with the power button right now), wait a few minutes, then turn it back on. Nothing changed.
Please, does anyone have any insight into this? What else could I possibly try, or what could I be doing wrong? I really don't want to send it to repair yet again in such a short time.
Many thanks in advance.
gabeblack said:
I'm really hoping you guys can help me out here. This is an S7 I bought from a Best Buy when I visited the US in 2017, and I got the Unlocked version so I would be able to use it back in my home country. Unfortunately, this is the second time I've had trouble with it in a span of 4 months and the first time it was a hardware problem and ended up quite expensive to get fixed.
Today I was using my phone normally when I decided to use the Google instant translation to translate something on my computer screen. That caused my phone to freeze, restart, and then tell me I was using an unauthorized flash and it was going to be locked, or something like that. Even after restarting a few more times, the phone would never get past that screen. I proceeded to factory reset/cache reset and from then on the phone just got stuck in a boot loop.
I learned that the fix would be to flash the phone. After a lot of work I found the G930UUESACSI1-20190930144640 firmware (the XAA version, for Unlocked) and successfully used Odin 3.13 at the Download Mode screen to flash my phone. It then restarted, went back to the blue screen, started installing some updates, when it was 100% it restarted again. Unfortunately, the loop remained. Galaxy S7 logo first, then the Samsung logo, then it just repeats.
I have also tried turning the phone off with the Recovery screen shut down option (since I can't seem to be able to turn it off with the power button right now), wait a few minutes, then turn it back on. Nothing changed.
Please, does anyone have any insight into this? What else could I possibly try, or what could I be doing wrong? I really don't want to send it to repair yet again in such a short time.
Many thanks in advance.
Click to expand...
Click to collapse
You need to clear the cache after flashing to get out of the boot loop.
Use the download key combo to restart. As soon as the screen goes black move to Volume up+home+power.
In the recovery menu choose clear/ Wipe cache, then choose reboot.
I apologize for not updating this thread before when it was still recent. The fact is that I didn't manage to fix my phone; clearing the cache after flashing did nothing to stop the loop.
I ended up taking the phone to the people who have fixed it in the past and after more than one month, they gave up. So I got my phone back and I want to try to give it another go before I just sell it for parts.
Unfortunately, my phone has come back even worse. Now it has no Recovery Menu to speak of, at least none that I can access; after a few seconds of the blue text on the top saying that it's entering recovery mode, it then proceeds to a blue screen saying: "Security Error: This phone has been flashed with unauthorized software and is locked.". I can still access Download Mode.
I have attempted flashing a few firmwares that I believe should have worked with my SM-G930U. Odin listed the attempts as "pass" and, after restarting and going back to the Download screen, it says the binary is Official. However, after trying to restart the phone normally, it starts displaying the blue screen again, and then, after going to Download mode, the binary is reverted to "Custom".
I believe right now the order of the day is to get the recovery menu to work again so I can do all the cache cleaning that seems to be required after flashing firmware. Any ideas at all on how I should proceed? Is there something specific I should download to fix the recovery menu?
How many files are you flashing in Odin, is it just 1 file in the AP slot, or 4 files: AP, BL, etc.? Also, is your phone rooted?
Drunkpilot said:
How many files are you flashing in Odin, is it just 1 file in the AP slot, or 4 files: AP, BL, etc.? Also, is your phone rooted?
Click to expand...
Click to collapse
Never rooted, was using the phone legit before it froze and entered boot loop. I flashed all 4 files, multiple times.
Someone tried fixing my phone a few days after I replied to this thread and some progress seems to have been made, but now the phone cannot get past a black screen with a "SBL Error! rdx_init!" in red text, and "upload mode" in yellow text. Still cannot access Recovery Mode, but Download Mode still works.
I did a little Googling on rdx_init errors and it seems I need a firmware dump from another G930U or something like that...any ideas on how I can proceed?
Flash it with Eng Boot in all slots using patched Odin. Reboot to recovery and wipe it. Reboot system. Then root it with advanced adb root. Links for all of this are here in xda. Enjoy
STA1NL3SS said:
Flash it with Eng Boot in all slots using patched Odin. Reboot to recovery and wipe it. Reboot system. Then root it with advanced adb root. Links for all of this are here in xda. Enjoy
Click to expand...
Click to collapse
Sorry, I'm not an expert at this by any means, I'm not sure what files to get. So far I've found and downloaded the following:
S7_Oreo_Nougat_Adb_Advanced_Root_V10
S7_Oreo_Nougat_Adb_Advanced_Root_V12
S7_Oreo_Su_Binary_Only_ADB_Root
But I had no luck flashing any of these cause my binary is 10. Is there any more help you can provide me? I really don't know how to proceed
gabeblack said:
Sorry, I'm not an expert at this by any means, I'm not sure what files to get. So far I've found and downloaded the following:
S7_Oreo_Nougat_Adb_Advanced_Root_V10
S7_Oreo_Nougat_Adb_Advanced_Root_V12
S7_Oreo_Su_Binary_Only_ADB_Root
But I had no luck flashing any of these cause my binary is 10. Is there any more help you can provide me? I really don't know how to proceed
Click to expand...
Click to collapse
I thought I had one in my phone, but I don't. If you look at the thread where you downloaded the Root_V12, you will see it. It's near the end of the thread somewhere.

Categories

Resources