Related
Hi all i port CRT-off animation for android 4.4.2 tested on XXUFNA5 firmware with FoxHound Rom
This mod will modify your build.prop to include two new values
persist.sys.screen_on=none
persist.sys.screen_off=crt
For DEV if you want use in your rom please credit me
Download
Installed on echoe rom v.5 , working fine. THANKS!
Please versione MJ7
Doesn't works on Kingcobra V1 4.3
Envoyé depuis mon GT-I9500 avec Tapatalk
Working perfectly on Carotix 7.1!
Omega 13.2 (xxMJ5) + talexop Kernel 1.2 = not working
...
No work on stock odex mj5 ;-(
Are just for deodex rom my friend
Inviato dal mio GT-I9505 con Tapatalk 2
Can i please for odex ? If You want i give You all files from odex rom..
Working perfectly on MJ5 ODEX
Here is the link for ODEX version.
Make backup before.
Huge thanks to @raffaele88
PS:Fixed link , now must work
mom4ence said:
Working perfectly on MJ5 ODEX
Here is the link for ODEX version.
Make backup before.
Huge thanks to @raffaele88
Click to expand...
Click to collapse
Dont work. Instalation aborted code 7. Atribute error. After this bootloop....
Not work with echoe v5+ mj5 with ausdim kernel.
Flashing in cwm is ok but crt-off is absent
Inviato dal mio GT-I9505 con Tapatalk
koko115 said:
Dont work. Instalation aborted code 7. Atribute error. After this bootloop....
Click to expand...
Click to collapse
Fixed , try again from this link
mom4ence said:
Fixed , try again from this link
Click to expand...
Click to collapse
Now work perfect on mj7. Very thx
Can You add for this mod long menu to kill app and 3way reboot ?
not work with Wanam 3.1 MJ8
Not working on omega 13.2 phone goes in bootloop
koko115 said:
Now work perfect on mj7. Very thx
Can You add for this mod long menu to kill app and 3way reboot ?
Click to expand...
Click to collapse
Later.
valerio.tosti said:
Not working on omega 13.2 phone goes in bootloop
Click to expand...
Click to collapse
Not true. Work super on omega 13.2 i test it. Try install mod from first post.
koko115 said:
Not true. Work super on omega 13.2 i test it. Try install mod from first post.
Click to expand...
Click to collapse
nope not working for me. strange
koko115 said:
Not true. Work super on omega 13.2 i test it. Try install mod from first post.
Click to expand...
Click to collapse
valerio.tosti said:
nope not working for me. strange
Click to expand...
Click to collapse
It does work flawlessly on Omega 13.2 for me too!!!
Thanks for this mod!
I have no 9305 now,so I should remove this link. I can't test it by myself. And I don't want to go on working with it. If you like miui,you can download 4.2.2 one. Here is the thread link:http://forum.xda-developers.com/showthread.php?t=2406362
Oh this is great. What kernel should we use? Any screenshots?
Sent from my GT-I9305 using xda app-developers app
santos.jeff said:
Oh this is great. What kernel should we use? Any screenshots?
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
I have no 9305 now so I have no device to test. And you need not to flash kernel. It used official kernel.
Thanks so much!!
Envoyé de mon GT-I9305 en utilisant Tapatalk
THx for your work!!!
just a question Multiwindows is working like other samy rom?
It will be THE perfect Rom with this!!!
laskarface said:
THx for your work!!!
just a question Multiwindows is working like other samy rom?
It will be THE perfect Rom with this!!!
Click to expand...
Click to collapse
I'd like too CRT OFF (i have some guide about) and window animation (too)
Envoyé de mon GT-I9305 en utilisant Tapatalk
Thank you! But 4.2.2 with the new kernel runs perfect for me Good batt save.
Which Sammy RoM was used as a base?
painball said:
Which Sammy RoM was used as a base?
Click to expand...
Click to collapse
ZHMB1
what is sammy rom? is it based on stock 4.1.2 with samsung multiwindow ?
Samsung official ROM (Sammy). To be specific 4.1.2 ZHMB1
Boot loop, your rom doesn't work with me.
Here is logcat.
http://gheut3mpib.1fichier.com/
Lo-P said:
Boot loop, your rom doesn't work with me.
Here is logcat.
http://gheut3mpib.1fichier.com/
Click to expand...
Click to collapse
Sorry I forget to merge one commit. Now it's ok.
Here is the link.
http://miuirom.xiaomi.com/rom/u10498368/4.3.26/miui_nian_i9305_4.3.26_a20cac40a1_4.1.zip
I think its time we get Dual Boot Kernel!!!!
I love miui on my sgs2 ,,,, with dual boot ofcourse and a big 32 GB sd card for sometimes i change the style for show or whatever
I test miui but stay on Kit Kat ..... :´( hmpf
xerxen said:
I think its time we get Dual Boot Kernel!!!!
I love miui on my sgs2 ,,,, with dual boot ofcourse and a big 32 GB sd card for sometimes i change the style for show or whatever
I test miui but stay on Kit Kat ..... :´( hmpf
Click to expand...
Click to collapse
Nobody already made this for i9305... So, it's not him that will try to build it, he already build MIUI
Anyway, if you have a GS3 (not a variant) you can do this.
jing95916 said:
Sorry I forget to merge one commit. Now it's ok.
Here is the link.
http://miuirom.xiaomi.com/rom/u10498368/4.3.26/miui_nian_i9305_4.3.26_a20cac40a1_4.1.zip
Click to expand...
Click to collapse
Same error, same logcat, same boot loop...
Any plans to release this version for the N7105?
I also tried this last night and confirm it wouldn't boot. No bootloop, just stuck on the miui boot screen.
Sent from my GT-I9305 using Tapatalk
wildcardspv said:
I also tried this last night and confirm it wouldn't boot. No bootloop, just stuck on the miui boot screen.
Sent from my GT-I9305 using Tapatalk
Click to expand...
Click to collapse
This is what I meant
Envoyé de mon GT-I9305 en utilisant Tapatalk
Today, I made an unofficial build for Falcon of the latest Slimkat version. This is while waiting for the official builds to start again. I decided to share it as I know quite a few people would like this.
Please bear in mind the following:
- I am not a developer but a humble maintainer; this means I can't fix bugs.
- I have no idea whether this build works for phones other than mine, an XT1032. Flash at your own risk.
- I will try to update regularly but don't panic if I skip a week or two occasionally...
Also:
- I find that my build takes a long time to boot, but it does boot.
- Wifi and camera don't work. However, I flashed XPerience Kernel by TeamMex and both wifi and camera work flawlessly now.
Code:
/*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
INSTALLATION:
- Download ROM and SlimGapps or PAGapps
- Download SuperSU
- In recovery, wipe data/factory reset
- Flash ROM, Gapps and SuperSU
- Reboot
KERNEL SOURCE
FEATURES
(includes Heads Up with colour choice for background and text)
CHANGELOGS
CREDITS : SLIMKAT DEVELOPERS
and razrqcom dev team
Enjoy!
First! Hehehe
Dual sim?
@StrangerWeather a small hope that maybe this will support XT1033 Dual sim
@StrangerWeather how did you get it booting?! I tried 4 times with different trees and it didn't boot. Always got stuck on bootlogo!
deeplyyoung said:
@StrangerWeather a small hope that maybe this will support XT1033 Dual sim
Click to expand...
Click to collapse
I don't think the official version supported dual sim, so I would be surprised if this one did.
rudi_j7 said:
@StrangerWeather how did you get it booting?! I tried 4 times with different trees and it didn't boot. Always got stuck on bootlogo!
Click to expand...
Click to collapse
Hi, it was fairly easy actually. I used : repo init -u git://github.com/SlimRoms/platform_manifest.git -b kk4.4-caf
I did repo sync, breakfast falcon and then brunch falcon. There was a missing kernel folder which I got from here. Added it and the build succeeded. Booting took a long time but just as I was about to give up the setup screen appeared.
StrangerWeather said:
I don't think the official version supported dual sim, so I would be surprised if this one did.
Hi, it was fairly easy actually. I used : repo init -u git://github.com/SlimRoms/platform_manifest.git -b kk4.4-caf
I did repo sync, breakfast falcon and then brunch falcon. There was a missing kernel folder which I got from here. Added it and the build succeeded. Booting took a long time but just as I was about to give up the setup screen appeared.
Click to expand...
Click to collapse
NOW I GOT IT! How stupid of me!! This ROM is based on CAF and I wasn't using a CAF kernel!..... Damn! Thanks!
rudi_j7 said:
NOW I GOT IT! How stupid of me!! This ROM is based on CAF and I wasn't using a CAF kernel!..... Damn! Thanks!
Click to expand...
Click to collapse
You're welcome!
try this
www.htcmania.com/showthread.php?t=904129
mikivila said:
try this
Click to expand...
Click to collapse
mikivila said:
try this
www.htcmania.com/showthread.php?t=904129
Click to expand...
Click to collapse
Surprisingly this does not have the long boot time issue. Great job! y
mikivila said:
try this
www.htcmania.com/showthread.php?t=904129
Click to expand...
Click to collapse
adizz4 said:
Surprisingly this does not have the long boot time issue. Great job! y
Click to expand...
Click to collapse
Thanks @mikivila! You're more than welcome to take over the thread if your build is better than mine. Are Wifi and camera working without flashing a separate kernel?
Let me know !
StrangerWeather said:
Thanks @mikivila! You're more than welcome to take over the thread if your build is better than mine. Are Wifi and camera working without flashing a separate kernel?
Let me know !
Click to expand...
Click to collapse
Yup, everything is working well for me.
However it took ages to boot with xpe kernel.
Revert to default Slim UI
mikivila said:
try this
www.htcmania.com/showthread.php?t=904129
Click to expand...
Click to collapse
Hi Mikivila,
I tried your SlimKat 7.9 Mod and it is working great :good:. I really love the SlimRoms and I'm happy to see, that they are available for my new Moto G. However, I have one problem - I'm not too crazy about the modified UI. Is there an easy way to switch back to default Slim UI?
Thank you very much for all your effort to keep SlimKat alive on this device! If there is anything I can do to help (testing etc.) it will be my pleasure to participate!
Vibsi
Thank you!
Never mind, I saw that you (mikivila) put up a version with the original Slim UI. Thank you very much!
(and thanx to Google translator, otherwise I would have really been screwed by not learning french or spanish at school )
yup ORIGINAL UI SLIMKAT
flash as normal into recovery
http://www.mediafire.com/view/t774h4hb4m562pf
---------- Post added at 11:43 PM ---------- Previous post was at 11:37 PM ----------
StrangerWeather said:
Thanks @mikivila! You're more than welcome to take over the thread if your build is better than mine. Are Wifi and camera working without flashing a separate kernel?
Let me know !
Click to expand...
Click to collapse
ya work without any kernel haha
mikivila said:
yup ORIGINAL UI SLIMKAT
[...]
Click to expand...
Click to collapse
Once again thank you! I will try it tomorrow, can't wait... :highfive:
As I wrote earlier I translated your spanish thread with Google translator. I'm not really sure if I got everything right, but you state there that you didn't build again from source but rather edited some settings in the latest weekly to get it working, right? Amazing work!
Are there any known issues? BT and GPS working OK?
I was using SlimSaber (an optimized SlimKat) on my old i9100 for a long time and I'm extremely happy that I can go on using SlimKat with my new amazing Moto G!
(If it's convenient for you, you can PM me in french. I can have that translated by my wife - that's much better than Google translator. Sadly I don't know anyone close who speaks spanish - but I keep searching :fingers-crossed
Dar las gracias (hope I got that one right)
Vibsi
gracias a todos,lamentablemente no hablo frances aunque estoy cerca jejeje, no hay cambios en el codigo fuente,a sido mas sencillo que lo que parece,con BT no hay problema, con gps hay que hacer el truco de volver a stock ,aceptar terminos de ubicacion y poner la ubicacion sin redes ni wifi,creo que es asi,y luego instalar la rom
mikivila said:
gracias a todos,lamentablemente no hablo frances aunque estoy cerca jejeje, no hay cambios en el codigo fuente,a sido mas sencillo que lo que parece,con BT no hay problema, con gps hay que hacer el truco de volver a stock ,aceptar terminos de ubicacion y poner la ubicacion sin redes ni wifi,creo que es asi,y luego instalar la rom
Click to expand...
Click to collapse
What ever you post here in xda it should be in english. Read xda rules bro (just informing )
pico hackr said:
What ever you post here in xda it should be in english. Read xda rules bro (just informing )
Click to expand...
Click to collapse
I'm sorry, I might have mislead mikivila by using a Spanish term to show my appreciation for his work.
What I get from Google translator (I smoothed the output a little with my own words) :
mikivila: Thank you all, unfortunately I do not speak French but I'm around, LOL, no changes to the source code, it has been easier than it looks. No problem with BT, if there are problems with GPS do the trick to re-stock, accept Google terms of location services and fix the location once without wifi (only use GPS), and then install SlimKat weekly
@mikivila - too bad you don't speak french, that would have made everything a bit easier. But Google translator does a good job translating from Spanish to English (but the output is horrible if I translate directly from Spanish to German ) If you want to post something you could PM me in spanish (personal message - not a direct XDA post) and I can translate it through Google and rephrase the output to proper English.
Vibsi
I don't know where else to post it, no one looks at the Q & A, and this is strictly for the 7", so yolo. But here you go. I want everyone to tell me a rom they favor, that's not here already, or that was stopped on development a few versions back. Which ever rom (or maybe couple of roms) I see most, I will build. Check my signature for the ROMs I've done on the S5.
Can you port Tab 3 or tab 4 Stock Touchwiz UI rom..?
Sent from my MI 3W using Tapatalk
pro_granade said:
I don't know where else to post it, no one looks at the Q & A, and this is strictly for the 7", so yolo. But here you go. I want everyone to tell me a rom they favor, that's not here already, or that was stopped on development a few versions back. Which ever rom (or maybe couple of roms) I see most, I will build. Check my signature for the ROMs I've done on the S5.
Click to expand...
Click to collapse
Would love to see a Liquid Smooth LP and KK. Thanks for asking!
Carbon Rom Lollipop
I would like carbon rom 5.1.1 for p3110
I would love to see either Optipop or Broken OS. They are both fast, mostly stable and have layers, which I prefer over CM theme engine. I took a quick look over in the S5 forum and saw that you are juggling at least 3 roms, impressive!
Hopefully, you can find the time to build one of these roms mentioned above. :laugh:
Thanks,
Mike T
I would like Ressurection Remix Rom Android 5.1.1.
Thanks,Az-09.
I like a dirty unicorns ROM or paranoid ROM and make them both 5.1.1
i like ColorOs for p3100 please
https://www.youtube.com/channel/UCFOXaGCffiYCEvfe2RbnnXA
Build AOSP Android-M-Preview for Tab 2 (P31xx and P51xx) devices.
Everyone will surely appreciate if you build it.
You can get manifest via repo by using this -
Code:
repo init -u https://android.googlesource.com/platform/manifest -b android-m-preview
Thanks in advance.
if possible would you continue Android-Andi's project of Sungsonic which is based on stock 4.2.2 or port latest tab model's stock roms for our tab 2 ? basically i am requesting for more stock based good looking roms
Kelbin1994 said:
if possible would you continue Android-Andi's project of Sungsonic which is based on stock 4.2.2 or port latest tab model's stock roms for our tab 2 ? basically i am requesting for more stock based good looking roms
Click to expand...
Click to collapse
You're right !
I agree
levider said:
You're right !
I agree
Click to expand...
Click to collapse
Btw SSHD i.e sungsonic hd was @Adi Shakthi 's project
Sent from my MI 3W using Tapatalk
iSagar7 said:
Btw SSHD i.e sungsonic hd was @Adi Shakthi 's project
Sent from my MI 3W using Tapatalk
Click to expand...
Click to collapse
So.. why should you pay attention to me and not to what he wrote?
I did not write that it's his project: D
Bro could you make a Paranoid Android 5+ for P3110?
Inviato dal mio LG-D405n utilizzando Tapatalk
Plz make izer hd lollipop for p3100
Dark_Cristian said:
i like ColorOs for p3100 please
https://www.youtube.com/channel/UCFOXaGCffiYCEvfe2RbnnXA
Click to expand...
Click to collapse
Yep, It,d be awesome if u could port ColorOS to P3100..
d3mondroid said:
Yep, It,d be awesome if u could port ColorOS to P3100..
Click to expand...
Click to collapse
I suggest this rom for love the oppo's UI and because it's most similar to TW UI. THANKS for support my suggest!!!
iSagar7 said:
Btw SSHD i.e sungsonic hd was @Adi Shakthi 's project
Sent from my MI 3W using Tapatalk
Click to expand...
Click to collapse
i guess android-andi stopped the development of sungsonic HD and i think he would allow(only my view ,don't know what he thinks of it) other developer to continue the project if asked permission from him. At the end,it's all about samsung tab 2 getting new lives.
SlimShady's said:
Bro could you make a Paranoid Android 5+ for P3110?
Inviato dal mio LG-D405n utilizzando Tapatalk
Click to expand...
Click to collapse
Already been ported by @CCD.. I think
d3mondroid said:
Already been ported by @CCD.. I think
Click to expand...
Click to collapse
Nope
I know we aren't supposed to link other people's work without permission so I'll just tell you the site it is on. You know the firmware site that has all the moto phones... https://mirrors.lolinet.com. Firmware > Moto > Payton > Unofficial.
Edit: To disable the navbar use the Magisk Module for that as the lineage navbar setting does not work
Working:
RIL: Wifi, Data, Bluetooth, Etc
Not working:
Mic... In phone calls from the looks of it. It may be my other device so I will do further testing and report back later.
Screenshots:
https://photos.app.goo.gl/nVqRLVXZKj5TD22V8
Very glad a dev is interested in android 10 on x4. Thank you for posting.
Is the devs name listed in system info?
blueberry.sky said:
Very glad a dev is interested in android 10 on x4. Thank you for posting.
Is the devs name listed in system info?
Click to expand...
Click to collapse
Probably it's not listed, but it's Erfan, the same dev from the previous LineageOS versions.
you'd think we would have heard from Lenovo about our Android 10 status by now...
sleze said:
you'd think we would have heard from Lenovo about our Android 10 status by now...
Click to expand...
Click to collapse
Don't worry... Google has it covered. If it comes to it you can flash the Fi firmware.
vibraniumdroid said:
Edit: got everything working on same build...
Click to expand...
Click to collapse
How is it that wifi is now working? Something you did?
I've heard that bluetooth is not working on that build
mariotullece said:
I've heard that bluetooth is not working on that build
Click to expand...
Click to collapse
It seemed to turn on but I did not test jt
blueberry.sky said:
How is it that wifi is now working? Something you did?
Click to expand...
Click to collapse
Something I did wrong the first time round
Can you please confirm if this is completely stable to be used daily? Are the moto gestures available? Which GApps did you flash if any? Thanks.
vibraniumdroid said:
It seemed to turn on but I did not test jt
Click to expand...
Click to collapse
can you confirm if it works? I'm willing to flash it if bluetooth is not a problem
mariotullece said:
can you confirm if it works? I'm willing to flash it if bluetooth is not a problem
Click to expand...
Click to collapse
Yes, I just confirmed Bluetooth is FULLY functional. I will post screenshots in a bit.
vibraniumdroid said:
Yes, I just confirmed Bluetooth is FULLY functional. I will post screenshots in a bit.
Click to expand...
Click to collapse
I saw that you mentioned on the original post the problem with phone calls and I can confirm that this is indeed a problem.
After you said that the bluetooth was working I decided to flash this rom, and everything worked flawlessly and very smoothly until I tested the phone call, and it really is a bummer since it does not work.
So for now I guess that the best is to stay away from this rom in this current build.
Something I have noticed is that battery life is far better than stock or lineage 16.
Any update is mic working?
There are daily builds since the start of this month. Looks like dev has resume the work (previous LOS17 build was back in Sep last year).
gleenfield97 said:
There are daily builds since the start of this month. Looks like dev has resume the work (previous LOS17 build was back in Sep last year).
Click to expand...
Click to collapse
Dev starts his work on los17.1 ,we testing that builds once it is stable he will released
the LOS 17.1 build from 08/02 has any major bug?
I use, abuse and indicate. today I even managed to do the dirty update. both from ROM and from gapps and twrp. finally we can enjoy Android 10 on the moto x4. thanks to everyone involved. I'm here to test and installed all possible updates. thanks!
eu uso, abuso e indico. hoje inclusive consegui fazer a atualização suja. tanto da ROM quanto do gapps e twrp. finalmente podemos do Android 10 no moto x4. obrigado a todos os envolvidos. estou aqui para testar e instalei todas as atualizações possíveis. obrigado!