CyanogenMod 11.0 is a free, community built distribution of Android 4.4.2 (KitKat) which greatly extends the capabilities of your phone.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is a build of CM11.0 for the Samsung Epic 4G. It may cause all the things in the disclaimer to happen, or steal your girlfriend while you are busy flashing ROMs.
Please submit a patch to our Gerrit instance if you want to help out.
WARNING: If you are any build prior to the 11/12 CM11.0 build, this will wipe your data due to a resizing of the mtd partitions. If you wish to go back to another ROM, you will need to ODIN back to stock. If updating from a build prior to 11/12, it is recommended to format /system, /data, and /cache AFTER making your backup.
Recommended steps before you install:
1. Install AppBak from Market, run it and save a list of all your apps.
2. Install SMS Backup and Restore from Market, run it and backup your SMS history.
3. Install Call Logs Backup and Restore from Market, run it and backup your call log history.
4. Boot into CWM recovery. Make a full Backup. You will need this backup later if you decide to go back to your previous ROM and data.
5. It is recommended that you wipe data before installing CM11.0 for the first time.
Additional Disclaimer:
Any bug reports coming from an Unofficial CM11.0 build, or a modified/patched Official CM11.0 build (modem patch, kernels, etc.) should be directed to the originating thread. It is hard enough to provide bug support for the official releases without having to worry about bugs that may have been introduced by outside means. Bug reports are very welcome if you can reproduce them after flashing back to an official, stock build. We do want to be able to fix all the things. Thank you.
**Google Apps are not included in these ROMs. You'll need to install those yourself if you want them.
Nightly Builds
http://download.cyanogenmod.org/?device=epicmtd
Known Issues:
- 3g data basically works - Although it has the wifi/mobile data toggle bug again. Disable mobile data before turning on wifi for best results. Fixed 12/04
- Stock browser (and anything else using webviews) - Big black boxes. Use another browser temporarily until fixed. Fixed 11/17
- Wimax temporarily disabled
- Current bluetooth behavior untested for improvement.
- Wired headset mic & buttons. (Yeah, Yeah, someday...)
- Probably more.
Previous preview Builds
cm-11-20140101-UNOFFICIAL-epicmtd.zip
cm-11-20131226-UNOFFICIAL-epicmtd.zip
cm-11-20131211-UNOFFICIAL-epicmtd.zip
cm-11-20131210-UNOFFICIAL-epicmtd.zip
cm-11-20131206-UNOFFICIAL-epicmtd.zip
cm-11-20131205-UNOFFICIAL-epicmtd.zip
cm-11-20131117-UNOFFICIAL-epicmtd.zip
cm-11-20131112-UNOFFICIAL-epicmtd.zip
Potentially Unstable Build - 12/04
Alot more features have been added back in, but I've been experiencing some weirdness especially after a reboot. Certain issues seem to be tied to certain gapps packages. I have not determined the best one to use, but I post this build for those of you who want something more current.
Features (including but not limited to the following, some of which may have already existed in previous builds):
*** I think I have taken even more space from /data to give to /system. Make your backups before flashing ***
- Working data (data toggle shuffle no longer necessary)
- Quick access ribbon
- Quick access panel (with Torch enabled)
- Circle battery
- Lockscreen shortcuts
- Vibrator intensity and capacitive button backlight control
cm-11-20131204-UNOFFICIAL-epicmtd.zip
EDIT:
Stable version
This version uses the boot.img from the 11/17 build (thanks to didhiy for experimenting), therefore it has the same partition layout as the 11/17 build. Should be safe to flash over the 11/17 build, but backups are still always recommended.
cm-11-20131204-UNOFFICIAL-fixed-epicmtd.zip
12/10/2013
- All kernel & device patches included in the latest build have been merged or uploaded to gerrit (to possibly be merged later).
- Additional patches necessary for the build include the following:
http://review.cyanogenmod.org/#/c/55500/
http://review.cyanogenmod.org/#/c/55109/
http://review.cyanogenmod.org/#/c/55110/
http://review.cyanogenmod.org/#/c/55111/
http://review.cyanogenmod.org/#/c/55512/ (12/11/13) Merged.
- Recommended gapps: http://d-h.st/eWW (12/09).
Actually, it looks like the Wifi / 3G data toggle shuffle bug is back. So as a reminder, if you want to turn on wifi, turn off mobile data first. Otherwise, when you turn off wifi, your 3g data will not reconnect without a reboot.
First! :laugh:
Amazing work bbelos! I will have to give this a try when I get a little free time.
bricked
this may have softbricked my phone im not sure I tried to install it and then the phone turned off now it wont go past the boot screen
Jduncan312 said:
this may have softbricked my phone im not sure I tried to install it and then the phone turned off now it wont go past the boot screen
Click to expand...
Click to collapse
Can you still boot into recovery? Try flashing it again. Sometimes the repartitioning is a little touchy.
Sent from my SPH-D700 using xda app-developers app
no I cant..it wont even turn on now I cant even get into download mode lol
Jduncan312 said:
no I cant..it wont even turn on now I cant even get into download mode lol
Click to expand...
Click to collapse
try to pull battery for a while, put it again then try download mode
Wow, can't believe you have an unofficial officialish version up and running before my GSM Gnex.
Downloading now... Hope it fares well in terms of battery.
P.S. Not even having an unofficial CM11 for Galaxy Nexus is lame!
Sent from Google Nexus 4 @ Android 4.4 KRT16M
Jduncan312 said:
no I cant..it wont even turn on now I cant even get into download mode lol
Click to expand...
Click to collapse
Well, I just re-tested it. Restored back to cm-10.2 and downloaded the zip from the link. Wipe data/reset and format /system (like the warning recommends), and flashed the zip. It rebooted right away back into recovery (because it had to flash the kernel first). Flashed the zip again, then gapps and then I rebooted with a successful boot-up.
Worst case if you still can't get into recovery, you'll still be able to get into download mode and get restored and try again. There shouldn't have been any way for it to kill the bootloader.
Sent from my SPH-D700 using xda app-developers app
Downloading now, I want to try the sweety kit kat on epic
Sent from my SPH-D700 using xda app-developers app
I had to flash gapps a second time (after the included recovery replaced twrp) but so far it works just fine.
ART helps a ton, it's instantly noticeable, but takes up quite a bit of space.
You guys rock.
Still Epic.
Edit: webview/browser seems to be very unstable. half of the surface blacks out and lags the device. this is with both dalvik and ART
Sent from my LG-LS970 using Tapatalk
bbelos said:
Well, I just re-tested it. Restored back to cm-10.2 and downloaded the zip from the link. Wipe data/reset and format /system (like the warning recommends), and flashed the zip. It rebooted right away back into recovery (because it had to flash the kernel first). Flashed the zip again, then gapps and then I rebooted with a successful boot-up.
Worst case if you still can't get into recovery, you'll still be able to get into download mode and get restored and try again. There shouldn't have been any way for it to kill the bootloader.
Sent from my SPH-D700 using xda app-developers app
Click to expand...
Click to collapse
tested... boot without problem :thumbup:
first impression, can't install apk from file manager
with "package parsing error" warning
Anyone else keep getting errors with phone and gapps processes booting up even after wiping data/cache, format /system and wiping dalvik?
Just tested it out. Lags are significantly more obvious than 4.3 and 4.2, but the beauty of KitKat totally overwhelms that. One thing I noticed is that Mass Storage speed is slower than usual.
Sent from Google Nexus 4 @ CM11
---------- Post added at 06:23 PM ---------- Previous post was at 06:20 PM ----------
didhiy said:
can't install apk from file manager
with "package parsing error" warning
Click to expand...
Click to collapse
Oops... same here. Forgot to check up on that. Reverting.
Sent from Google Nexus 4 @ CM11
mi7chy said:
Anyone else keep getting errors with phone and gapps processes booting up even after wiping data/cache, format /system and wiping dalvik?
Click to expand...
Click to collapse
I didn't try install gapps, no problem with phone service
AndyYan said:
Just tested it out. Lags are significantly more obvious than 4.3 and 4.2, but the beauty of KitKat totally overwhelms that. One thing I noticed is that Mass Storage speed is slower than usual.
Sent from Google Nexus 4 @ CM11
---------- Post added at 06:23 PM ---------- Previous post was at 06:20 PM ----------
Oops... same here. Forgot to check up on that. Reverting.
Sent from Google Nexus 4 @ CM11
Click to expand...
Click to collapse
I really like the dialer :thumbup:
so beauty & pretty
mi7chy said:
Anyone else keep getting errors with phone and gapps processes booting up even after wiping data/cache, format /system and wiping dalvik?
Click to expand...
Click to collapse
I can't get gapps to work either. I've tried a few different ones that are supposed to be for 4.4 but all force close and stop the boot process. End up with a black screen and force close pop ups. I'm guessing a compatible gapps isn't available yet or I just haven't been able to find it.
didhiy said:
tested... boot without problem :thumbup:
first impression, can't install apk from file manager
with "package parsing error" warning
Click to expand...
Click to collapse
Same error..
I have flashed the gapps and can't sign in to google
Reverting to CM 10.2 no problem here like Jduncan said
Sent from my SPH-D700 using xda app-developers app
Related
(all credit goes to xkonni, intervigil & the others behind CM10!)
FAQ / Q&ASome known problems/bugs & their (hopefully working) workarounds:
Note: before complaining, please try a clean (wipe everything at least 3 times) installation first!
& PLEASE READ AT LEAST THE LAST 5 PAGES OF THIS THREAD!
Wi-Fi is not working:
Make sure you flashed the right boot.img with fastboot
if your Wi-Fi Channel is higher than 10, try a lower one
try changing your wifi country code in Settings / Wifi / Menu / Advance to e.g. Europe or US
App-Switch is no longer "Menu" by default:
go to Settings - System - Hardware keys
configure it like you want
Do I need to flash the boot.img manually in fastboot?:
No, if you're using TWRP and are on a Hboot-version lower than 1.13
Yes, if you're using any other recovery (like CWM)
Yes, if you're using TWRP and your ville has the Hboot-version 1.13 or higher
Phone doesn't boot beyond the CM-Bootanimation:
download the boot.img for the build you're running here, or extract it from the .zip you flashed
flash the (right!) boot.img in fastboot
if you erased/deleted cache in fastboot, go into recovery and erase it again
Notification LED's don't work:
go to Settings - Display - Notification Light - Use custom values
Set it (green/red) for every app just like you want it to be
App XY doens't work:
try clearing cache or/and data
try fixing permissions
Massive battery drain & device is getting hot: (should not happen anymore)
enable 2G only
update to the latest radio, fix permissions and clear the caches
try a simple reboot
turn off Google Now & location history (you will still get the answercards when using voice search)
reboot everytime after you are using camera or gallery
turn off/disconnect GPS Services, reboot & keep them unconnected/turned off (thanks to djsubtronic)
[advanced: deactivate gallery & try e.g. Quickpic & ICS Camera (don't forget to reboot after using camera)]
turn off WiFi if you don't need it and you're not connected
adjust the screen-off time & the brightness
recalibrate battery
"SIM Network Unlock PIN" gets asked for: (should not happen anymore)
just hit "Dismiss"
only a handful of ringtones are shown: (should not happen anymore)
download the app zedge
download & set the ringtones you like just as you like
Sound/Music/whatever only plays through the speakers: (should not happen anymore)
unplug your headphones & replug them
download the widget Wired Headphone/Headset Fix
place it on your homescreen & use it
Click to expand...
Click to collapse
Please tell me what to add/delete!
hey folks,
I decided (& asked for xkonnis permission) to open a new thread where we can talk about the new features and things that (don't) work yet to keep the original CM10 DEVELOPMENT Thread clean!
Nightlies can be found here:
http://get.cm/?device=ville
[watch out that you DON'T FLASH CM9 OVER CM10!]
please note that atm these builds (& the nightlies!) are not stable, & you should only flash this if you are REALLY comfortable with it.
You should also be experienced in flashing & fastboot, adb & other stuff.
If you aren't then better read, read & read!
Nobody is responsible if this breaks or bricks your phone other than yourself!!!
a short statement from xkonni in another thread
xkonni said:
About this ROM
Community effort to bring CyanogenMod to the HTC One S aka Ville.
Disclaimer
Code:
This is no finished rom!
It has bugs and issues that still need to be fixed.
[...]
CM10
We are working on CM10. This is all you get. No ETA, no 'will feature xy be merged' nothing.
Click to expand...
Click to collapse
Gapps can be found here: http://goo.im/gapps
For a changelog visit github & gerrit
Submit your Logcats here:
http://paste.giev.de (select logcat for highlighting!)
or: in the official Development Thread for CM10 on the Ville
dc211 said:
Here are the radios for CM10. Remember these don't change the radio version as reported in hboot. Rather they change the radio version used in CM10 under settings -> about phone.
EU_0.16 Radio
EU_1.06s Radio
EU_1.06es Radio
TMoUS_0.16
TMoUS_1.08ts Radio
Click to expand...
Click to collapse
So who tried it? what is working & what isn't?
working:
mostly everything
Camera wakelock is fixed
appearance of the SIM unlock message is fixed
Headphones/-sets are recognized & work even in calls
In-Call Echo Fixed (once again)
Grafical glitches (e.g. for notifications) are fixed
WiFi-Hotspot
Receiving/answering calls
WiFi
Sending/Receiving a mms & sms
GPS seems to lock/work
Touchscreen
Google Now (also starting from the lockscreen)
Data & Network (for some users it seems to drop once in a while)
SD card
Sound
CRT-Screen-off animation
USB Mass Storage
ADB
Bluetooth, Bluetooth tethering & Bluetooth Audio
Quick toggles in navigationbar
Notification LED / LED in general
Lockscreen
Button Layout configurable
& of course: Google Now & Project Butter (& all the other sweets that come with 4.1(.1))
WHEN YOU ARE REPORTING SOMETHING WHICH IS WORKING PLEASE ADD THE EXACT NAME OF THE BUILD YOU ARE ON!
Not working:
swiping from the screen to the softkeys activates them
Headset icon doesn't show.
WHEN YOU ARE REPORTING SOMETHING WHICH IS NOT WORKING PLEASE ADD THE EXACT NAME OF THE BUILD YOU ARE ON!
Click to expand...
Click to collapse
a little video, thanks to hansthegeek:
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(thanks to nicxus & hansthegeek)
(all credit goes to xkonni, intervigil & the others behind CM10!)
Please think about DONATING TO XKONNI & intervigil!
Thanks for setting this up. Going to play with this build now (once my nandroid completes). Will report back and let you know how successful it is.
just tried the latest JB build
stuck at the cm9 bootscreen
is this only happening to me ?
flashed boot img and rom
just tried this
http://forum.xda-developers.com/showthread.php?t=1775954
working
oh wow haha if u can see my smile
thank you google for making this as fast as iOS and wp7
of course like any early build almost nothing is working wifi / data/ calls etc
PS
is it made by the same people ?
qwerty warrior said:
just tried the latest JB build
stuck at the cm9 bootscreen
is this only happening to me ?
flashed boot img and rom
Click to expand...
Click to collapse
Same here. Doesn't boot.
Sent from my HTC One S using xda premium
Anyone else have issues with restoring a nandroid after testing jb? I use twrp and the restore goes fine but after booting the restored rom the microphone won't work and data becomes very flaky.
Sent from my HTC One S using xda app-developers app
Bohemus said:
Anyone else have issues with restoring a nandroid after testing jb? I use twrp and the restore goes fine but after booting the restored rom the microphone won't work and data becomes very flaky.
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
did you delete everything before restoring? perhaps JB adds things that are not overwritten by an ICS backup?
Tried installing the build with today's date, and it won't boot like everyone else reported.
Going to try yesterday's build and see if there's a difference. Will post another update with the results.
---------- Post added at 11:57 AM ---------- Previous post was at 11:36 AM ----------
Got yesterday's build to boot.
No data or other radios (of course).
Most other things seemed to work. Butter is very nice and I love that lockscreen.
The auto-re sizing widgets didn't work, that is: When you try to put a widget on a page that has some space, but not enough for the widget in it's native form, it didn't re-size automatically.
--------UPDATE--------
Installed today's build over yesterday's and wiped cache/dalvik and it boots and it looks like I have a cell signal! I'll report back shortly!
Also meant to add, I am using TWRP and did NOT flash a boot image.
Will make this a rolling update as I'm still playing around. Will try installing today's build on top of this to see if that's successful.
fipsib said:
did you delete everything before restoring? perhaps JB adds things that are not overwritten by an ICS backup?
Click to expand...
Click to collapse
Yes, did a full factory reset wipe in twrp prior to the restore.
Sent from my HTC One S using xda app-developers app
Does it have the gapps built in?? Or do i just flash gapps-jb.zip in twrp?
Bohemus said:
Anyone else have issues with restoring a nandroid after testing jb? I use twrp and the restore goes fine but after booting the restored rom the microphone won't work and data becomes very flaky.
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Tried fastboot flashing the kernel you had before trying JB? Or maybe its just some butter leftovers smeared into the mic opening
Bohemus said:
Yes, did a full factory reset wipe in twrp prior to the restore.
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
I had the same issue after trying a JB rom, I did a full wipe before restoring and the boot animation was messed up and some other things too. had to make a titanium backup and did a fresh install.
Brandonrz said:
Does it have the gapps built in?? Or do i just flash gapps-jb.zip in twrp?
Click to expand...
Click to collapse
No gapps, trying some packages now, will report if I get any to work.
frdd said:
Or maybe its just some butter leftovers smeared into the mic opening
Click to expand...
Click to collapse
Haha nice one :-D
zaxondis said:
No gapps, trying some packages now, will report if I get any to work.
Click to expand...
Click to collapse
Does this mean you where able to boot?
fipsib said:
Does this mean you where able to boot?
Click to expand...
Click to collapse
Oh yeah.
Here's the latest:
Able to boot.
What works for me:
SD Mount Works
Data Works
Installed Gapps package from here: http://www.theandroidsoul.com/aosp-cyanogenmod-10-cm10-rom-nexus-s-guide/
One issue I had was, after installing today's build for the first time over yesterday's, it got stuck on the "Android is upgrading..." screen. Had to go back into recovery and wipe cache/dalvik for it to behave. Same thing after installing the Gapps package. Then it booted after a few minutes (first boot might take a while.
Still playing around, will report more successes/failures in a bit.
Flashing the latest zip
Mine gets stuck on boot animation then it just freezes.
I wiped cache n dav and got to android is upgrading but then it gets stuck at 'android is starting'
Any help?
I guess I'll try yesterday's n then flash over
Sent from my HTC VLE_U using xda premium
adulel08 said:
Flashing the latest zip
Mine gets stuck on boot animation then it just freezes.
I wiped cache n dav and got to android is upgrading but then it gets stuck at 'android is starting'
Any help?
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
Try flashing, the one from the 17th first, boot up, then go back into recovery and flash the one from the 18th right over it (don't wipe anything). It should boot after that but will definitely take several minutes.
---------- Post added at 02:27 PM ---------- Previous post was at 02:19 PM ----------
I ran this only for short while but here's what I've found:
WORKING:
Data
Gapps from here: http://www.theandroidsoul.com/aosp-c...nexus-s-guide/
Linking to Google account
GMail
SD Mount Works
NOT WORKING:
After using a bit phone started lagging, got force closes on various things
Phone does not work, can't make calls. Phone rings if you call it but freezes and phone app crashes if you try to answer.
Other issues:
1. After installing today's build for the first time over yesterday's, it got stuck on the "Android is upgrading..." screen. Had to go back into recovery and wipe cache/dalvik for it to behave. Same thing after installing the Gapps package. Then it booted after a few minutes (first boot might take a while.
2. The auto-re sizing widgets didn't work, that is: When you try to put a widget on a page that has some space, but not enough for the widget in it's native form, it didn't re-size automatically.
3. After trying to install 1 more app (Camera360 for fun)then the screen went black and wouldn't turn back on. Tried wiping caches and rebooting, but it hung on boot again.
INFO:
Also, I am using TWRP and did NOT flash a boot image.
Had to go back to ICS for now since I'll be running around this afternoon. Will keep playing with subsequent builds though. Seems like we're getting close! These devs are awesome!
Do these jb roms come with Google now, and the new voice search?
Sent from my HTC One S using xda app-developers app
Bohemus said:
Do these jb roms come with Google now, and the new voice search?
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Couldn't find it on CM10 but it's possible I just missed it (since I wasn't really looking for it).
BiteBlaze's ROM has it though.
Not sure if you're aware, but you can get a somewhat function versions of Google Now running on ICS (I've had to work on TrickDroid, CM9 and Liquid ICS so far) here: http://forum.xda-developers.com/showthread.php?t=1749045 Voice search does not work yet, just cards, but they're pretty cool.
Holly crap!
The cm-10-20120718-EXPERIMENTAL-ville (the newest one) booted!! I thought it froze but ten minutes later jelly bean! No joke! :victory::victory::victory::victory:
Make a nandroid before using
this is for Software Version 77.8.10.XT897.Sprint.en.US
you can check your version Settings > About Phone > SW version
Nothing has been stripped out or changed, this is completely stock.
To be clear it is NOT a full ROM and will replace your
/system/app
/system/framework
folders completely.
If you have added anything to these directories it will be removed.
I added Superuser to system/app is the only modification.
Again make a nandroid before flashing
77.8.10.XT897.Sprint.en.US DeOdexd
-Bryan
Previous deodexed tweaks
Rangerbry said:
Make a nandroid before using
this is for Software Version 77.8.10.XT897.Sprint.en.US
you can check your version Settings > About Phone > SW version
Nothing has been stripped out or changed, this is completely stock.
To be clear it is NOT a full ROM and will replace your
/system/app
/system/framework
folders completely.
If you have added anything to these directories it will be removed.
I added Superuser to system/app is the only modification.
Again make a nandroid before flashing
77.8.10.XT897.Sprint.en.US DeOdexd
-Bryan
Click to expand...
Click to collapse
Will the previous packages (ie 1% battery/toggles, power menu) work with this updated deodexed? I can't get my phone to boot whenever I flash those .zip packages with this system file.
drakeheart77 said:
Will the previous packages (ie 1% battery/toggles, power menu) work with this updated deodexed? I can't get my phone to boot whenever I flash those .zip packages with this system file.
Click to expand...
Click to collapse
No they won't I updated the power menu the downloads on the first post of that thread I'll get battery and toggles working soon.
Sent from my GT-N8013 using Tapatalk 2
Rangerbry said:
No they won't I updated the power menu the downloads on the first post of that thread I'll get battery and toggles working soon.
Sent from my GT-N8013 using Tapatalk 2
Click to expand...
Click to collapse
That's great I appreciate the work! However, after reflashing stock boot and recovery (I have two Nandroids already, one with aarrrrggghs kernel and one with shabby's kernel) and installing the update, I can't seem to get the darn system to boot after flashing the updated deodexed system. I have yet a few more things to try, so I will post an update as well. As far as testing all of this along with your mod zips, I am a willing volunteer! Send me whatever you come up with, I'll run the bugger without fear!
Peace,
-D-
---------- Post added at 03:57 AM ---------- Previous post was at 03:40 AM ----------
Perhaps I should've been more specific:
fastboot flash boot boot.img (taken from shabby's stock files)
fastboot flash recovery recovery.img
voodoo ota rootkeeper protect then unroot
download update
installed
reflashed TWRP and made another Nandroid of updated stock system
...now here's where I get confused on the wipe before install...
do I just wipe cache/dalvik? or those two with factory reset? or a full system wipe?
that last one doesn't make much sense, but in science you analyze all steps, eliminating them, and whatever is left, however improbable, must be the way yadda yadda.
thanx again
-D-
drakeheart77 said:
That's great I appreciate the work! However, after reflashing stock boot and recovery (I have two Nandroids already, one with aarrrrggghs kernel and one with shabby's kernel) and installing the update, I can't seem to get the darn system to boot after flashing the updated deodexed system. I have yet a few more things to try, so I will post an update as well. As far as testing all of this along with your mod zips, I am a willing volunteer! Send me whatever you come up with, I'll run the bugger without fear!
Peace,
-D-
---------- Post added at 03:57 AM ---------- Previous post was at 03:40 AM ----------
Perhaps I should've been more specific:
fastboot flash boot boot.img (taken from shabby's stock files)
fastboot flash recovery recovery.img
voodoo ota rootkeeper protect then unroot
download update
installed
reflashed TWRP and made another Nandroid of updated stock system
...now here's where I get confused on the wipe before install...
do I just wipe cache/dalvik? or those two with factory reset? or a full system wipe?
that last one doesn't make much sense, but in science you analyze all steps, eliminating them, and whatever is left, however improbable, must be the way yadda yadda.
thanx again
-D-
Click to expand...
Click to collapse
Wipe Dalvik should be onlything you have todo when flashing unless someones mods say todo otherwise. also heads up i think Shabbys kernel is just stock no changes to it except he added P's and Q's for the description
Huh...because once I flashed shabby's p & q wifi was completely blacked out...interesting tho. And I did figure it out and am fully DeOdexed with the power boot menu...just used the XDA assistant widget to replace (loosely) the toggles, and I have several widgets that display battery %. I am patient.
Sent from my XT897 using xda premium
drakeheart77 said:
Huh...because once I flashed shabby's p & q wifi was completely blacked out...interesting tho. And I did figure it out and am fully DeOdexed with the power boot menu...just used the XDA assistant widget to replace (loosely) the toggles, and I have several widgets that display battery %. I am patient.
Sent from my XT897 using xda premium
Click to expand...
Click to collapse
Did you flash shabby's kernel on the update? Because both shabby's and arrrghhh's kernels work with the original software version (77.6.36.XT897.Sprint.en.US) only. Modules have been changed in the update and wifi breaks every time.
Yeah..that's where I goofed. Using kernel builds for a completely different software file system/build. I didn't realize at the time that they are software specific.
Sent from my XT897 using xda premium
Whenever I attempt to wipe dalvik cache, I always get this error:
E:unknown volume for path [sd-ext]
If you have apps2sd enabled in your rom the /sd-ext partition holds a separate dalvik cache from internal memory. Because of the way the sd card is mounted, there's no method of mounting an ext partition at this time but TWRP still looks for it when wiping dalvik cache. Its just the way the recovery's wired, but everything's fine.
Thanks ranger by I have been annoyed for the last 3 weeks about the update by moto
Sent from my XT897 using xda app-developers app
Rangerbry said:
Make a nandroid before using
this is for Software Version 77.8.10.XT897.Sprint.en.US
you can check your version Settings > About Phone > SW version
Nothing has been stripped out or changed, this is completely stock.
To be clear it is NOT a full ROM and will replace your
/system/app
/system/framework
folders completely.
If you have added anything to these directories it will be removed.
I added Superuser to system/app is the only modification.
Again make a nandroid before flashing
77.8.10.XT897.Sprint.en.US DeOdexd
-Bryan
Click to expand...
Click to collapse
I am not able to just wipe the dalvik, but I end up factory reset and it works. I have alot of info on my current backup, and I wonder how do you keep the info and still install this update?
SykkNyzz said:
I am not able to just wipe the dalvik, but I end up factory reset and it works. I have alot of info on my current backup, and I wonder how do you keep the info and still install this update?
Click to expand...
Click to collapse
this shouldnt wipe any user data or play store installed apps just make a backup apply it and if anythings missing go back to your backup you just made
Dalvik & cache wipe was all I did, worked like a charm. Also I wanted to point out that the updated power boot menu works flawlessly.
AND I was able to mod my 3G/4G status bar icons using ROM Toolbox Pro. However for some reason that's the only ones it will do, all the other icons it will either run & tell me to reboot then no changes or run the innstall operation for literally over 20 minutes and I have to force-kill the app. I have emailed the dev team about that including a spec report on our phone. Have yet to hear anything back when I do will update again.
P.S. I changed the 3/4G icons to the Droid 4 style where it shows LTE next to the 4G.
Sent from my XT897 using xda premium
Curious... will this fix all the random glitches the update caused?
Also just to be clear... i just install via cwm, wipe cache and devlik and i'm good?
Its late at night and i am probably over thinking things
Sent from my XT897 using Tapatalk 2
That's right on the installation, but myself and the app developer are hashing out how to fix the status bar issues. Some work & the rest don't lol. Good luck!
Sent from my XT897 using xda premium
So far I am waiting for a response from Jared, ROM toolbox developer. I have emailed him my SystemUI.apk and the framework-res.apk so not only will this benefit me but perhaps a future re-vamped ROM Toolbox Pro.
Sent from my XT897 using xda premium
http://forum.xda-developers.com/showthread.php?t=2001226
Check out this latest post from me. Hope y'all find them to be of some use.
Sent from my XT897 using xda premium
What do those files do?
Sent from that one mopho...
They are stock image files to basically start from scratch to build your phone in case of a disaster or soft-brick.
Sent from my XT897 using xda premium
Post development questions/logcats etc here. Post "my data doesn't work" (after reading the OP) in the Q&A thread. The mods don't like the developers thread being filled with these user questions, and it's contrary to the goal of this board.
Read this post from our very helpful moderator if you still have any questions. I'll keep both OPs updated. I try to install every nightly and read all of the 10.1 threads. If anything is missing please PM me.
Q&A thread: http://forum.xda-developers.com/showthread.php?t=2071252
10.1.3 has been released.
As for all recent releases, please make sure you are on the MF1 modem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cyanogen Mod 10.1.0 Release is now available:
http://get.cm/?device=d2vzw
Huge thanks to the CM devs! Pop on over to http://www.cyanogenmod.org/ and make a donation (mouse over "Community" at the top right then select "Donate to us") if you'd like to help support the CM project!
Anyone looking for mastamoon's build with his tweaks, reverts, and cherrypicks - it was moved to Android Development. Here is the link! http://forum.xda-developers.com/showthread.php?t=2094251
Rooting, flashing, installing roms, following any instructions below, will void your phone's warranty and there is a chance (however small) that you'll screw up and permanently break your phone. Anything you do to your phone in violation of the warranty, insurance, or anything else is at your own risk!
CyanogenMod June 24th, 2013
http://www.cyanogenmod.org/blog/cyanogenmod-10-1-0-release
CyanogenMod 10.1.0 Release
Tonight we are ending the Release Candidate phase and pushing CM 10.1.0 to general release.
The files will be landing on our servers as they complete the build process. The list of devices will be in line with the devices that have received release candidates to-date. At this time, we do not plan on incorporating devices that did not receive a RC into this release. Also absent from this release are Tegra 2 powered devices and many of the Exynos based Samsung devices. We will provide a status report for these devices later this week.
Next on deck
With the 10.1.0 code finalized, we will return to our M-release cycle and work towards adding additional functionality and features; including the new Privacy Guard feature, which was merged into the nightlies today.
There are many new and exciting things planned for the remainder of the year, just wait and see what we will do next!
-The CyanogenMod Team
Click to expand...
Click to collapse
-+-+-+-+-+-+-+-+ OFFICIAL DOWNLOAD LINK -+-+-+-+-+-+-+-+
http://get.cm/?device=d2vzw
-+-+-+-+-+-+-+-+ NIGHTLY CHANGE LOG -+-+-+-+-+-+-+-+
App from invisiblek: https://play.google.com/store/apps/details?id=com.invisiblek.cm.nightlies
Or: http://10.1.cmxlog.com/?device=d2vzw
-+-+-+-+-+-+-+-+ GUIDE ON HOW TO ROOT AND FLASH -+-+-+-+-+-+-+-+
http://forum.xda-developers.com/showthread.php?t=2046439
-+-+-+-+-+-+-+-+ HOW TO BACKUP AND RESTORE YOUR IMEI -+-+-+-+-+-+-+-+
http://forum.xda-developers.com/showthread.php?t=1852255&highlight=nvbackup
-+-+-+-+-+-+-+-+ OFFICIAL GOOGLE+ -+-+-+-+-+-+-+-+
https://plus.google.com/+CyanogenMod/posts
-+-+-+-+-+-+-+-+ OFFICIAL GOOGLE+ COMMUNITY -+-+-+-+-+-+-+-+
https://plus.google.com/communities/107373456059326217974
-+-+-+-+-+-+-+-+ KNOWN / REPORTED ISSUES -+-+-+-+-+-+-+-+
On the 10.1.3 RC: (updated 7/18)
1: Only use the MF1 AIO file available here.
2: If you cycle bluetooth off and on it may get stuck. You need to reboot to resolve the issue.
3: Verizon FIOS app crashes
4: BT headsets don't work with the Skype app
5: If you set up a phone number to include pauses (like your voicemail PIN) the keypad wont register any other touches during that call.
Many other problems are fixed by simply re-flashing the same rom file over itself.
Please PM repeatable issues from the release to me. Post a logcat in the developer thread or a JIRA ticket if you expect it to get fixed.
-+-+-+-+-+-+-+-+ SPECIAL NOTES -+-+-+-+-+-+-+-+
1. To enable Developer Options: Menu > Settings > About Phone. Tap build number 7 times to unlock Developer Options
2. Photosphere: This feature is not offered on non-nexus devices
3. There are a lot of questions about how CM10.1 moves your files to sdcard/0/ folder. This is to support multi-users. If you flash back and forth between a non-4.2 ROM and CM10.1 (which is 4.2) you'll end up with sdcard/0/0/..etc since the upgrade to 10.1 moves your folders into a new /0/. You can safely move your files out of /0/ back to your sdcard if you're on CM10, or back to the first /0 folder if you're on CM10.1.
4. Don't update from CM10 to CM10.1 using the built-in cmupdater. Update in recovery for the first flash from CM10 to 10.1. Once on 10.1 you can use cmupdater.
-+-+-+-+-+-+-+-+ INSTALLATION NOTES -+-+-+-+-+-+-+-+
CM can be flashed using CWM or TWRP. Only use the latest TWRP or CWM!
When you install CM10.1 your data will be moved to a new folder /0/ (this is to support multi-users).
Make sure you have the latest CWM or TWRP installed so that your recovery isn't confused by the new location of your backups. Official TWRP d2vzw or Latest CWM (scroll down to Samsung Galaxy S3 (Verizon))
GAPPS is not included in any CM download. You must flash a gapps zip if coming from another rom or when starting with a clean install. You do not need to flash gapps when 'dirty flashing' over a previous CM install. Download gapps here.
According to Cyanogen it is possible to flash CM10.1 over top of an existing CM10 installation. It is generally recommended to do a clean install if you run into any issues.
Always make a backup before you try a dirty flash or upgrade to CM10.1.
-+-+-+-+-+-+-+-+ HOW TO INSTALL OVER CM10 -+-+-+-+-+-+-+-+
Consider backing up your IMEI if you haven't already (link)
If you use a lockscreen pattern disable it
Flash the latest CWM or Official TWRP d2vzw
Download a CM10.1 rom (nightly or unofficial) to your sd card
Download the latest gapps from goo to your sd card
Reboot into recovery
Make a backup
Wipe cache and dalvik (if you want)
Install CM10.1 zip
Install gapps
Reboot
After your phone boots go into Menu > Settings > Apps. Under "All" find "Clock", open it, and click "Clear Data"
-+-+-+-+-+-+-+-+ HOW TO INSTALL FROM ANY ROM OTHER THAN CM -+-+-+-+-+-+-+-+
Consider backing up your IMEI if you haven't already (link)
Flash the latest CWM or Official TWRP d2vzw
Download a CM10.1 rom (nightly or unofficial) to your sd card
Download the latest gapps from goo to your sd card
Use an app like Titanium Backup or Mybackup Pro to backup your apps (if you want)
Use an app like SMS Backup+ to backup your text messages and call log (if you want)
Reboot into recovery
Make a backup
Wipe cache and dalvik (if you want)
Wipe Data/Factory Reset/System
Install CM10.1 zip
Install gapps
Reboot
Reinstall Titanium Backup/Mybackup Pro/SMS Backup+ and restore the stuff you have to have, but its better to reinstall things from the market if possible (keep in mind your backups will be located in sdcard/0/) (if you want)
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
I am not a developer, I have no direct association with the CM project, I am just a community member. I will do my best to maintain this thread. Please PM me with any OP suggestions!
I Fixing Data
If you flashed a CM10.1 nightly and are stuck at roaming/activating or don't have data, try any of the following (in order of simplicity):
(1) Go into Mobile Settings - Mobile Networks. Change CDMA mode to RUIM, go into airplane mode, come out, it should login to 4g in a minute. You can wait for activating to time out then skip or not install gapps until after setting the correct mobile network setting.
Click to expand...
Click to collapse
(2) Power down. Take out the sim card and reboot. In mobile network settings set roaming to auto and the subscription to RUIM/SIM, turn off the phone, pop the sim card back in, boot up.
Click to expand...
Click to collapse
If none of those work this will work for sure:
Deevious88 said:
Hallelujah! My phone has voice AND data back! (thanks to the posters above)
How to get voice AND data back:
1.) Odin the root66.tar file from http://forum.xda-developers.com/showthread.php?t=1762204 (the torrent version downloads MUCH faster)
2.) Open the dialer and enter *2767*3855#
3.) DONE! Voice and data should be fixed (it fixed it for me at least, and I had tried EVERYTHING else)
From there just Odin back to Jellybean following http://forum.xda-developers.com/showthread.php?t=1974114 and you're golden...
Click to expand...
Click to collapse
That's how to get back to working condition without fail... Might want to post similar instructions in the OP as dirty flashing did nothing for quite a few of us.
Click to expand...
Click to collapse
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Fixing GPS
invisiblek said:
GPS - it HAS been working for 98% of builds, however if you cannot get GPS to connect, possibly due to dirty flashing, the following has worked every build for me: Settings - Apps - downloaded - GPS Status - clear cache, clear data, force stop. Then open gps status back up, let it sit with gps on for a moment and see if it starts searching for signal again....if this still doesn't work (sometimes) - settings - apps - all - google services framework - clear data. This has worked 100% of the time but I try to avoid it because if you do this, you need to go open back up the play store and see if it still connects. If not, recovery - clear cache, clear dalvik usually takes care of that.
Clean install of builds has given me 100% functional gps every time.
Click to expand...
Click to collapse
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Unofficial CM10.1
(I know several people have posted these, I looked quickly and only found mastamoon's which is also what I am running, I'll happily post more here if I find them).
mastamoon http://forum.xda-developers.com/showthread.php?t=2094251
Click to expand...
Click to collapse
invisiblek https://twitter.com/invisiblek_cm
Click to expand...
Click to collapse
aerovan http://rootzwiki.com/topic/37216-uno...zw-2012-12-18/
Click to expand...
Click to collapse
Unless somebody says otherwise, the official 10.1 nightlies wont have data until 2 commits are merged.
Add SamsungCDMAQualcommSIMRILL
http://review.cyanogenmod.org/#/c/28246/
Enable SamsungCDMAQualcommSIMRILL
http://review.cyanogenmod.org/#/c/28247/
Continue to use the unofficial builds that can be found on other forums if you want your CM10.1 fix.
Thanks for this thread. About time.
Sweet
Via my Google Galaxy S3 running sweet sweet Jelly Bean
Noticed these don't have data yet. Later in the week I may merge those commits and upload a kang
Via my Google Galaxy S3 running sweet sweet Jelly Bean
Strange they would leave out the commits for data, but I will flash as soon as there is a build with them
after flashing 10.1, how did you guys find your previous backup?
I can't seem to find it because now 10.1 is trying to use my external sd to save everything, and i cannot locate my previous back up anywhere.
kimsj756 said:
after flashing 10.1, how did you guys find your previous backup?
I can't seem to find it because now 10.1 is trying to use my external sd to save everything, and i cannot locate my previous back up anywhere.
Click to expand...
Click to collapse
For some reason it nested your old internal SD card. Check inside a folder labeled as "0" then CMUpdater if that is what you downloaded it through.
On another note. Is anyone planning on making a build with the data commits yet today? Or are they slated to be included in the next nightly? The disclusion of the data severely through me off this morning.
This might sound stupid however, would it be possible to get a list of additional features that are added with 10.1 the only thing i know that is different is the quick settings menu. other than that, i am not certain what is new with this version.
littleneutrino said:
This might sound stupid however, would it be possible to get a list of additional features that are added with 10.1 the only thing i know that is different is the quick settings menu. other than that, i am not certain what is new with this version.
Click to expand...
Click to collapse
Here is the clock fix.
The single application known not to work is the Clock: Our changes to 4.1's clock to add the Stopwatch and Timer in CM10 aren't compatible with Google's own implementation of those features in 4.2 (which we're using in cm10.1); If your clock starts crashing after upgrading to 10.1, simply go into the Settings -> Apps menu, choose Clock from the All tab, and hit "Clear data".
littleneutrino said:
This might sound stupid however, would it be possible to get a list of additional features that are added with 10.1 the only thing i know that is different is the quick settings menu. other than that, i am not certain what is new with this version.
Click to expand...
Click to collapse
The thing I'm interested in from 4.2 (I'm assuming it will make it over to cm10.1) is always on VPN
Sent from my SCH-I535 using Tapatalk 2
A few important notes from cyanogen:
# Do not use the CyanogenMod Updater to go from 10.0 to 10.1. While you will have a functional rom, due to the 1st bullet point, you will be left without your proprietary applications and their data. We highly suggest performing the initial install manually via recovery (flashing CM and your addons). Once you are on 10.1, you can use the CM Updater as per normal.
# Finally, we always advise that you create a backup before any update. Do note, however, that due to Android 4.2 changes to support multi-user mode, your backups will automatically be transferred to /sdcard/0/[backup folder]. Remember this when attempting to restore 10.0.
On the nexus 7 boards I heard TWRP has been updated to see this. Not sure if that is true or not, not sure if that holds true for CWM, or for any recovery on the d2vzw.
However you can use a file explorer app to move them back to the root of the sd card.
Restola said:
A few important notes from cyanogen:
# Do not use the CyanogenMod Updater to go from 10.0 to 10.1. While you will have a functional rom, due to the 1st bullet point, you will be left without your proprietary applications and their data. We highly suggest performing the initial install manually via recovery (flashing CM and your addons). Once you are on 10.1, you can use the CM Updater as per normal.
# Finally, we always advise that you create a backup before any update. Do note, however, that due to Android 4.2 changes to support multi-user mode, your backups will automatically be transferred to /sdcard/0/[backup folder]. Remember this when attempting to restore 10.0.
On the nexus 7 boards I heard TWRP has been updated to see this. Not sure if that is true or not, not sure if that holds true for CWM, or for any recovery on the d2vzw.
However you can use a file explorer app to move them back to the root of the sd card.
Click to expand...
Click to collapse
TWRP has been updated to 2.3.2 (may show up as 2.3.2.3 on your phone) and doesn't have the problem of borking your folders. I've downloaded it (don't remember where, just google it) and it works fine.
also, i'm on 12.18, and do have data, have sent back and forth MMS, downloaded and everything seems find, EXCEPT:
camera works, first time it froze and said couldn't find camera, but rebooted, wiped cache and dalvik and fixed permissions and seems to "work" however, picture quality seems borked a little.
other than that all seems to be working fine.
Clockwork was updated yesterday.
Restola said:
A few important notes from cyanogen:
# Do not use the CyanogenMod Updater to go from 10.0 to 10.1. While you will have a functional rom, due to the 1st bullet point, you will be left without your proprietary applications and their data. We highly suggest performing the initial install manually via recovery (flashing CM and your addons). Once you are on 10.1, you can use the CM Updater as per normal.
# Finally, we always advise that you create a backup before any update. Do note, however, that due to Android 4.2 changes to support multi-user mode, your backups will automatically be transferred to /sdcard/0/[backup folder]. Remember this when attempting to restore 10.0.
On the nexus 7 boards I heard TWRP has been updated to see this. Not sure if that is true or not, not sure if that holds true for CWM, or for any recovery on the d2vzw.
However you can use a file explorer app to move them back to the root of the sd card.
Click to expand...
Click to collapse
goldsmitht said:
TWRP has been updated to 2.3.2 (may show up as 2.3.2.3 on your phone) and doesn't have the problem of borking your folders. I've downloaded it (don't remember where, just google it) and it works fine.
also, i'm on 12.18, and do have data, have sent back and forth MMS, downloaded and everything seems find, EXCEPT:
camera works, first time it froze and said couldn't find camera, but rebooted, wiped cache and dalvik and fixed permissions and seems to "work" however, picture quality seems borked a little.
other than that all seems to be working fine.
Click to expand...
Click to collapse
What method did you use to UG to 10.1 to allow you to have data working?
goldsmitht said:
TWRP has been updated to 2.3.2 (may show up as 2.3.2.3 on your phone) and doesn't have the problem of borking your folders. I've downloaded it (don't remember where, just google it) and it works fine.
also, i'm on 12.18, and do have data, have sent back and forth MMS, downloaded and everything seems find, EXCEPT:
camera works, first time it froze and said couldn't find camera, but rebooted, wiped cache and dalvik and fixed permissions and seems to "work" however, picture quality seems borked a little.
other than that all seems to be working fine.
Click to expand...
Click to collapse
According to the TWRP site the vzw gs3 is still on 2.3.1.0. If you have a link to the new one spread the love
peaceofpi said:
What method did you use to UG to 10.1 to allow you to have data working?
Click to expand...
Click to collapse
+1
pyrostic said:
+1
Click to expand...
Click to collapse
I have factory reset the phone - couldn't back anything up - so there goes a lot of music and pictures and most important my backups but oh well - rebuilt the phone - installing 10.1 over stock - let's see what happens.
Note to self - always move your backups to BOTH the SD card AND your computer. Live and learn
peaceofpi said:
I have factory reset the phone - couldn't back anything up - so there goes a lot of music and pictures and most important my backups but oh well - rebuilt the phone - installing 10.1 over stock - let's see what happens.
Note to self - always move your backups to BOTH the SD card AND your computer. Live and learn
Click to expand...
Click to collapse
Data still won't work FYI.
Frank is my testing source, I don't regularly update it unless I am testing something new.
Don't ask me for features, I won't give them because I only add what is considered essential
FRANK
Layers
Day/Night theme switcher from first M preview
Init.d support
Advanced reboot
SuperSu 2.52 flashed with the rom
Volume rocker wake
Volume rocker cursor control
Long press quick settings control
Stock Like feel, please don't ask for features
Known Bugs
Nothing else that I know of, if something doesn't work, check runtime permissions in /settings/app/
Project Fi requires setting runtime permissions in settings or it won't work once app is installed
Installation
Roms can change from update to update that sometimes you can dirty flash but if you have errors that other users don't then you will have to clean flash
First Time Installation:
Download the ROM and Gapps Below.
Connect your Nexus 5X to the PC and transfer all the zips to the root of your device’s storage.
Reboot into recovery mode (Shut down, press VolDown + Power buttons. In bootloader mode, select Recovery mode)
Wipe the following partitions: System, Data and Cache
Install the ROM zip file along with Gapps package
Let it boot. Setup now and wait for the ROM to settle.
Reboot into Recovery again and Install any other zip files you may choose to use.
Updating from previous version:
1.Download the ROM and Other Optional files ie kernel.
2.Connect your Nexus 5X to the PC and transfer all the zips to the root of your device’s storage.
3.Reboot into recovery mode (Shut down, press VolDown + Power buttons. In bootloader mode, select Recovery mode)
4.Wipe the following partitions: Dalvik-cache and Cache
5.Install the ROM zip file along with Gapps
6.Reboot now
7.Let it boot. Setup now and wait for the ROM to settle.
8.Reboot into Recovery again and Install any other zip files you choose to use.
9.If have issues with dirty flash, reboot and redo steps wiping DATA also
Sources
GPL Kernel Source: Prebuilt Aosp provided by Google
Rom Source: Click here
Changelog
Code:
11-8-2015
sprint switching on fi (sprint dm has crashed), update 2 fixed camera
11-7-2015
Update to r26, add support for bullhead
Removed .25 and .75 animation options
Removed ambient display revert
(Gotta remerge them cause of merge conflicts, just was trying to get bullhead up and running.)
Added back debugging code so I can debug everything and find any hidden errors
Downloads
Current Build = https://www.androidfilehost.com/?fid=24269982086990814 11-8-2015 update 2
Gapps = https://androidfilehost.com/?fid=24269982086987891 banks
Current layers themes will only work on light themes until adapted
OT talk is welcomed in my threads and development is done in the open. I encourage involvement in the project in any way.
Please do not complain about OT, it encourages a fun and relaxed environment
Like the work I did, consider donating. I'm currently not working so it helps feed me
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=BPFLE54YPRV92
Yes, my PayPal account is thatguy32404, I like to keep my banking stuff separated from my social account
XDA:DevDB Information
Frank, ROM for the LG Nexus 5X
Contributors
sykopompos
Source Code: https://github.com/marshmako
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 11-8-2015 update 2
Stable Release Date: 2015-11-08
Created 2015-11-08
Last Updated 2015-11-07
Found the sprintdm bug, beanstown fixed it up for me
Going to flash this, love your work on layers. I'm sure I'm gonna enjoy this!
Edit: It booted, with a little bit of nostalgia, lollipop boot animation with a twist. nice! However it went straight into "android is optimizing" even after a clean flash. Will report back after I've played a little.
k.s.deviate said:
Going to flash this, love your work on layers. I'm sure I'm gonna enjoy this!
Edit: It booted, with a little bit of nostalgia, lollipop boot animation with a twist. nice! However it went straight into "android is optimizing" even after a clean flash. Will report back after I've played a little.
Click to expand...
Click to collapse
Did you make sure to wipe your caches? Coming from the factory image, you should mount your system in twrp, wipe it, wipe dalvik and dalik-caches and most likely data
I'm working on fixing the camera, didn't realize it was broken till I took a actual picture (I just loaded it up and checked but didn't take a picture)
sykopompos said:
Did you make sure to wipe your caches? Coming from the factory image, you should mount your system in twrp, wipe it, wipe dalvik and dalik-caches and most likely data
I'm working on fixing the camera, didn't realize it was broken till I took a actual picture (I just loaded it up and checked but didn't take a picture)
Click to expand...
Click to collapse
I didnt mount and wipe.. crap. i temp went back to my backup and now my password isn't recognized..
Edit: a proper wipe and restore did not restore my password.
k.s.deviate said:
I didnt mount and wipe.. crap. i temp went back to my backup and now my password isn't recognized..
Edit: a proper wipe and restore did not restore my password.
Click to expand...
Click to collapse
I had that even on stock
sykopompos said:
I had that even on stock
Click to expand...
Click to collapse
ive restored a few times and never encountered it until now. did a factory reset to solve.
k.s.deviate said:
ive restored a few times and never encountered it until now. did a factory reset to solve.
Click to expand...
Click to collapse
I had it the very first time after I flashed twrp ?
11-8 update 2 is up. Camera and fi switching to sprint is fixed thanks to beanstown (stupid symlinks)
As soon as Graphite is stable on stock I'm flashing this bad boy.
Cheers mate.
Frank up and running
Elementalx kernel has anyone managed to boot...
tried flashing zip not booting
Nice work, installed correctly. Sound levels is very low tho.
My only question is if Android Pay is verified working?
added to index
[INDEX] LG NEXUS 5X Resources Compilation Roll-Up
vampire36 said:
Frank up and running
Elementalx kernel has anyone managed to boot...
tried flashing zip not booting
Click to expand...
Click to collapse
I have to take a look at what flar is doing on the 5x
NisseGurra said:
Nice work, installed correctly. Sound levels is very low tho.
Click to expand...
Click to collapse
We used to have to change out some files on the n5, probably is that.
I'll take a look into it later
buru898 said:
My only question is if Android Pay is verified working?
Click to expand...
Click to collapse
? Android pay works by cts verification, people are having a hard enough time on even keeping it working on stock with root, it will be a long while till we get it on working on aosp.
Been running it for few hours now, no major bugs so far.
Missing the camera app in the rom tho.
Using snap camera and it is as good as the stock one
NisseGurra said:
Been running it for few hours now, no major bugs so far.
Missing the camera app in the rom tho.
Using snap camera and it is as good as the stock one
Click to expand...
Click to collapse
I remove old aosp apps since most people replace them with Google apps or equivalent, that includes aosp browser, MMS, and a few others which is pretty standard in aosp ROMs since the apps still look like ics (I kept gallery because quickpic was bought out)
sykopompos said:
I remove old aosp apps since most people replace them with Google apps or equivalent, that includes aosp browser, MMS, and a few others which is pretty standard in aosp ROMs since the apps still look like ics (I kept gallery because quickpic was bought out)
Click to expand...
Click to collapse
Ok, i am old timer so i added some apps back: aosp browser, old calendar etc. I still looking for an functional mms.apk, the one from cm etc gives fc.
Very good ROM, no lock function
NisseGurra said:
Ok, i am old timer so i added some apps back: aosp browser, old calendar etc. I still looking for an functional mms.apk, the one from cm etc gives fc.
Click to expand...
Click to collapse
There is a themable MMS by Dave Wilson that works for aosp.
I don't have the link but I will post it once I get it from Dave
Hello. This is my first ROM, based off of Cyanogenmod. A few Cyanogen features have been removed, and some non-CM features have been added. I am still testing it, but it seems to work fine for my t769.
WILL NOT WORK ON EXHILERATE
If any moderator wants me to remove DL links and close thread, notify me immediately.
This is my personal ROM, I build one after every CM nightly that comes out. I'm just uploading it here/my Dropbox for anyone who wants the same experience.
What exactly have I done?
-UberKernel v1 1.89GHz stock clock
-Removed CM's annoying Statistics and Bug Reports
-Removed stock CM apps
-Added ES File Explorer Free in place of CM File Manager
-Added Kernel Tuner
-Added stock 4.2 AOSP Launcher in place of Trebuchet
-Replaced CM's Torch with the one from CM10 (now has strobe, a useful feature that was removed in KitKat)
-Replaced Browser with AOSP 4.1.2
-Added Anthony Resario's Afterburner theme
-Replaced CM's boot screen with a generic Android boot screen
-Replaced DeskClock with the AOSP equivalent from 4.1.2
-Removed some live wallpapers
-Added Link2SD system app
How to install
1. Make sure you have a recovery installed. If not, I will be uploading an Odin-compatible package in the future. I recommend Philz Touch, although a different CM based recovery will work. Not tested on TWRP, use at your own risk.
2. Make a NANDROID backup.
3. Wipe Data
4. Wipe /sytem
5. Wipe /cahce
6. Factory reset
7. Install ROM
8. Wipe the Dalvik
9. Factory reset
10. Reboot, and keep an eye on it. Apps will prompt for SU on boot.
11. After it's done, reboot and install GApps if you want/need them.
DISCLAIMER:
I am not responsible if you brick, fry, or otherwise destroy your device as a result of flashing this ROM. I will not claim liability or replace your device. All features included in this ROM are properties of their respective owners, I merely assembled them into one place.
Changelog:
1/10/2016 - First beta/testing release
Planned features:
-Better DSP manager
-New default background
-possible shutdown sequence
-Flash Player support
-maybe 2.0GHz clock rate if it doesn't burn my device
-Tweak battery/4G
-Button light fix
-AOSP KitKat launcher
DOWNLOAD LINKS:
Newest Version:
Dropbox
Google Drive
Older versions:
Dropbox
Google Drive
XDA:DevDB Information
NoobROM 4.4.4, ROM for the Samsung Galaxy S Blaze 4G
Contributors
SiberianLeopard, SiberianLeopard
Source Code: http://download.cyanogenmod.org/?device=t769&type=
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Based On: Cyanogenmod
Version Information
Status: Testing
Current Beta Version: 0.7
Beta Release Date: 2016-01-10
Created 2016-01-10
Last Updated 2016-01-10
New nightly coming! Stay tuned!
Development will also branch to the MyTouch 4G Slide and the Samsung Galaxy Epic 4G Slide.
Also mine
One more for good measure
Whats the battery life on this build??!
PowSniffer0110 said:
Whats the battery life on this build??!
Click to expand...
Click to collapse
I'm behind on a nightly, so not as good as normal. Right now, my Blaze hasn't had its 4 year old battery replaced, but when on standby with WiFi, min/max frequency set to 192/1890MHz and Governor set to Samsung with a ROW I/O scheduler, get about 3 days until it completely dies. The temperature sensor in my battery is shot, so I can't accurately report temperatures until I can find a decent OEM battery replacement. WiFi doesn't work properly, which is a bug in the kernel I have to fix in the updater script. My suggestion (until I fix various things with my ROM) is to download the latest CM nightly, flash UberKernel V1, and use Link2SD to uninstall all of the CM bloatware. If you're feeling adventurous and daring you can flash this and report the results.
Im on Validus by GZRoms 4.4.4 and the thread seams to be closed.... Cant ask questions. I have NO more internal space, with barely any apps installed. It partitioned my internal to have its on storage, built in SD, and my ACTUAL external SD. I cannot figure how to move apps to SD, it will not work, Ive tried the app2sd fixes, ive gone to apps and enabled 'App moving' and rebooted. No dice. Any help?
---------- Post added at 04:35 PM ---------- Previous post was at 04:33 PM ----------
My battery life is terrible most times on Validus 4.4.4 as well, even with the UBER 4.1 kernel. Thats why i asked you about the battery life on yours cause I need more. Have you used that 4.4.4? That one and yours seem to be the only ones and I need to be able to move apps2sd so I can actually have the apps I want. Literally have only 10 apps installed probably.
PowSniffer0110 said:
Im on Validus by GZRoms 4.4.4 and the thread seams to be closed.... Cant ask questions. I have NO more internal space, with barely any apps installed. It partitioned my internal to have its on storage, built in SD, and my ACTUAL external SD. I cannot figure how to move apps to SD, it will not work, Ive tried the app2sd fixes, ive gone to apps and enabled 'App moving' and rebooted. No dice. Any help?
---------- Post added at 04:35 PM ---------- Previous post was at 04:33 PM ----------
My battery life is terrible most times on Validus 4.4.4 as well, even with the UBER 4.1 kernel. Thats why i asked you about the battery life on yours cause I need more. Have you used that 4.4.4? That one and yours seem to be the only ones and I need to be able to move apps2sd so I can actually have the apps I want. Literally have only 10 apps installed probably.
Click to expand...
Click to collapse
Try Link2SD, and try my ROM. I just released a new nightly, the WiFi should work, if not I need to update it again.
Also, the Blaze only comes with 1.4GB of internal storage. I use PA GApps pico, and install anything else I actually use (like maps and Hangouts Dialer). GApps can easily take up massive amounts of space. Battery life has been fixed in my latest nightly. Please try out the ROM and see what it does. You have to do a FULL SYSTEM WIPE, except for EFS and RADIO partitions. I use PhilZ Touch. app2SD is frankly a terrible app in comparison to Link2SD, which is included in my ROM. If you use the SAMSUNG governor and ROW I/O scheduler and the battery life still sucks, get a new battery. If you also constantly have 4G, Wifi, and Bluetooth as well as NFC on, that will definitely drain your battery. Open Battery Stats in Settings and tell me what uses the most battery. Turn your screen brightness all the way down.
SiberianLeopard said:
Try Link2SD, and try my ROM. I just released a new nightly, the WiFi should work, if not I need to update it again.
Also, the Blaze only comes with 1.4GB of internal storage. I use PA GApps pico, and install anything else I actually use (like maps and Hangouts Dialer). GApps can easily take up massive amounts of space. Battery life has been fixed in my latest nightly. Please try out the ROM and see what it does. You have to do a FULL SYSTEM WIPE, except for EFS and RADIO partitions. I use PhilZ Touch. app2SD is frankly a terrible app in comparison to Link2SD, which is included in my ROM. If you use the SAMSUNG governor and ROW I/O scheduler and the battery life still sucks, get a new battery. If you also constantly have 4G, Wifi, and Bluetooth as well as NFC on, that will definitely drain your battery. Open Battery Stats in Settings and tell me what uses the most battery. Turn your screen brightness all the way down.
Click to expand...
Click to collapse
I'm downloading now and gonna test the link2sd and the battery life. Is this what you're running still?
PowSniffer0110 said:
I'm downloading now and gonna test the link2sd and the battery life. Is this what you're running still?
Click to expand...
Click to collapse
Development has been halted as of now because some [email protected] stole my Blaze. I'm saving for a new one but I kinda need the $70 because its part of my food budget.
Every time I try to install setup wizard fails and the phone doesn't fully boot correctly. Any suggestions??
PowSniffer0110 said:
Every time I try to install setup wizard fails and the phone doesn't fully boot correctly. Any suggestions??
Click to expand...
Click to collapse
If it's the Cyanogenmod setup wizard, I cannot help, as I said development has been halted until I can get another Blaze.
It if's the Google setup, boot the phone without flashing GApps a few times, finish the CM setup wizard, change a few settings, browse the web. After that then flash GApps and add an account through settings.
Another thing you can try is booting the phone in Safe Mode by holding the Vol+ and Vol- keys during boot.
I can't seem to be able to clear the defaults for Launcher so that I enable a new one. Am I missing something or is it just not possible?
shmargin said:
I can't seem to be able to clear the defaults for Launcher so that I enable a new one. Am I missing something or is it just not possible?
Click to expand...
Click to collapse
Go to Settings and then go to Home, there you can change what launcher you use.
SiberianLeopard said:
Go to Settings and then go to Home, there you can change what launcher you use.
Click to expand...
Click to collapse
Sorry, I should have said, I tried looking there too, I don't have a home option anywhere in settings, not under personalization, or anywhere else that I can find.
shmargin said:
Sorry, I should have said, I tried looking there too, I don't have a home option anywhere in settings, not under personalization, or anywhere else that I can find.
Click to expand...
Click to collapse
Use Link2SD to make the launcher you want a system app and then uninstall the one I included. I just bought another Blaze (mine was stolen) so I will resume development as soon as it arrives.
Also, how do you like the ROM? Does everything function properly?
By the way, the thanks button is right at the bottom of all of my posts.
SiberianLeopard said:
Use Link2SD to make the launcher you want a system app and then uninstall the one I included. I just bought another Blaze (mine was stolen) so I will resume development as soon as it arrives.
Also, how do you like the ROM? Does everything function properly?
By the way, the thanks button is right at the bottom of all of my posts.
Click to expand...
Click to collapse
Havent used it much, everytime I try and install, I get the error of Setupwizard force close and can never set up the ROM. When is your Blaze arriving? Any chances we will get any new updates or advances? I will try and reinstall today.
PowSniffer0110 said:
Havent used it much, everytime I try and install, I get the error of Setupwizard force close and can never set up the ROM. When is your Blaze arriving? Any chances we will get any new updates or advances? I will try and reinstall today.
Click to expand...
Click to collapse
I don't know when, probably next week and depending upon where CM source is at in development we might see NoobROM 5.1. I like KitKat better, and this is more of a personal project so it might stay KitKat with 5.1 APIs.
I might just scrap the CM wizard. It's pretty useless and only serves its purpose for new users.
SiberianLeopard said:
Development has been halted as of now because some [email protected] stole my Blaze. I'm saving for a new one but I kinda need the $70 because its part of my food budget.
Click to expand...
Click to collapse
Hey I got it up and running pretty well, couple problems.... battery charged all night over night and my battery will not move past 26%. I dont think this is ROM specific as I was having weird battery issues before. I don't know what to do tho? And I have quite a few Force Closes of apps, including Facebook, and ESPN. They force close regularly and are pretty much unusable. Valadis ROM seemed a lot more stable. I love the link2SD tho it works almost flawless! I can now have my apps back, even tho 1 of 2 internal storage still shows only 20+MB free internal? Why? I have all my apps installed externally. Anyway, if we flash a different kernel, or the one from Valadus ROM, will it break the link2SD feature?? Idk what it is, but that ROM is smoother and less Force Closes. I'll keep running this and look forward to an update!
PowSniffer0110 said:
Hey I got it up and running pretty well, couple problems.... battery charged all night over night and my battery will not move past 26%. I dont think this is ROM specific as I was having weird battery issues before. I don't know what to do tho? And I have quite a few Force Closes of apps, including Facebook, and ESPN. They force close regularly and are pretty much unusable. Valadis ROM seemed a lot more stable. I love the link2SD tho it works almost flawless! I can now have my apps back, even tho 1 of 2 internal storage still shows only 20+MB free internal? Why? I have all my apps installed externally. Anyway, if we flash a different kernel, or the one from Valadus ROM, will it break the link2SD feature?? Idk what it is, but that ROM is smoother and less Force Closes. I'll keep running this and look forward to an update!
Click to expand...
Click to collapse
Slow down, speed racer.
To answer your questions:
Q. What's wrong with my battery?
A. The Blaze is known for battery issues. Go into recovery, wipe everything (SD card, system, dalvik, factory reset, and data+cache), and then flash a new ROM. If your battery issues persist your battery is shot. Order a new one online.
Q. Is your kernel stable?
A. It's as stable as I could get it. If you're having trouble with FCs, reinstall PA GApps 4.4.4.
Q. Will flashing a new kernel break the ROM?
Short answer: Yes.
Long, complicated answer: No.
Q. I have no space left.
A. To free up internal storage, make sure your SD card is at least 16GB, I recommend 32 for this ROM. Install all the apps you want and then get rid of the Play Store. I use Blackmart, and will include it in the next update.