Related
[APP] USB Mass Storage for Ice Cream Sandwich & Jelly Bean [v.1.2.0-pre - 02.02.2012]
Hey all!
Note: This App was developed in the early days of Ice Cream Sandwich Ports. At this time none of the Ports had native USB Mass Storage support and this App was meant as a temporary workaround to use UMS nevertheless. So this App won't be interesting for you, unless the ICS or JB Port you use still doesn't natively support UMS. If that is the case, here comes help:
Update for Jelly Bean: I successfully tested the App (v1.1.4!) with the first test release of a Jelly Bean Rom for Nexus One.
Update for MTP: I probably found a way to permanent support UMS for devices that originally use MTP, but I don't have a device to test this. So, if preferably a Galaxy Nexus owner would be so kind to test a few things for me, please pm me. Thanks![/url].
USB Mass Storage for ICS (that doesn't have native UMS support (yet))
USB Mass Storage for ICS and JB (that doesn't have native UMS support (yet))
Description
The app starts automatically after booting up the device and automatically detects when the device is being connected via USB to a computer. Then a notification pops up in the notification bar and by tapping on the notification you will open a GUI to enable/disable USB Mass Storage; just/almost like the original UMS feature.
Click to expand...
Click to collapse
Confirmed supported devices (JB)
HTC Nexus One
Samsung Galaxy Mini GT-S5570
Sony Ericsson Xperia X8
Confirmed supported devices (ICS)
HTC Desire
HTC Desire HD
HTC Droid Incredible
HTC Evo 3D
HTC Evo 4G
HTC HD2
HTC Nexus One
Huawei Sonic U8650
Kindle Fire
LG P350 Optimus Me
LG P500 Optimus One
Motorola Droid 3 (XT860)
Samsung Galaxy Ace (S5830)
Samsung Galaxy Mini GT (S5570)
Samsung Galaxy Note (N7000)
Samsung Galaxy S (I9000/I9000B)
Samsung Galaxy S 2 (I9100G)
Samsung Galaxy Gio (S5660)
Samsung Infuse 4G
Samsung Moment
Sony Ericsson Xperia X8
Sony Ericsson Xperia X10i
Click to expand...
Click to collapse
APK Download
For the devices listed above, the App works like a charm.
Latest stable version (1.1.4): Download APK (you'll probably want this one!)
Latest version (1.2.0-pre): Download APK
Older versions: see post attachemets.
A few Notes:
Sync- / Multiple Partition-Issue
If you have multiple partitions on your SD card, you might have a problem with file list syncing. When UMS is enabled and you alter files on your SD via Computer, you won't see the changes on your device (and vice-versa). The app will work nevertheless. All copied/deleted files are there/gone! It is just a sync problem. Resync and you'll see it.
Pre release version (Sync- / Multiple Partition-Fix)
Beside the stable version 1.1.4, there exists a pre-release version of 1.2.0 that fix the sync issue. Feel free use this version, but be aware of the fact that not all of the settings from the menu are working yet! At the moment, this is basically v1.1.4 with improved layout and sync fix. So please don't report bugs for the settings that doesn't work.
MTP
Another thing to note is that devices using MTP (such as the Galaxy Nexus) most probably won't be able to use UMS via the App at all. There have been reported a few suggestions to fix that, but atm those fixes doesn't work. I'm working on that, but i'm doing this in my sparetime and don't have a device that uses MTP myself, so it's hard to work on that. Anyway you can try.
Click to expand...
Click to collapse
APK Source
I uploaded the source files to my github account. You can check it out at:
Master: https://github.com/eyecatchup/net.bexton.android.UsbMassStorageToggle
Dev: https://github.com/eyecatchup/net.bexton.android.UsbMassStorageToggle/tree/dev
Click to expand...
Click to collapse
Changelog
1.2.0-pre
Cleaned Layout
Changed device map referrer from hard coded mmcblk0 to be dynamically recognized
Adjusted translation files.
Few minor other changes.
1.1.4
Layout changed from two buttons to one toggle button.
Changed device map referrer from vold/179:1 to mmcblk0
Adjusted translation files.
Few minor other changes.
v1.1.3
Added Multi-language support.
Added local language files for German, Spanish, Dutch, Swedish & Norwegian.
v1.1.2
Notification fixes & improvements.
v1.1.1
Notification fixes.
v1.1.0
Added auto-detection of USB connection.
Added notifications support.
Added auto-start after boot.
v1.0.3
Code clean up.
v1.0.2
Code clean up.
Added menu button to close the app properly.
Click to expand...
Click to collapse
If you have any issues, let me know.
Cheers!
Thanks.
Sent from my Nexus One using XDA App
Thanks
Brilliant!!! CLASS!!!
can someone mirror these for me. K cant seem to successfully download it either on phone or computer.
Thanks
Sent from my Nexus One using XDA App
dang025 said:
can someone mirror these for me.
Click to expand...
Click to collapse
http://icsmirror.mtsgrit.nl/
Screw the original android UMS. One thing I have always hated about UMS was that all of my sd partitions (Have 3) promps on my computer when I activate it. Only using 179:1 (Fat partition) is quite nice.
However a nice feture (If you have the time) would be a partition list to choose which to mount?
dk_zero-cool said:
Screw the original android UMS. One thing I have always hated about UMS was that all of my sd partitions (Have 3) promps on my computer when I activate it. Only using 179:1 (Fat partition) is quite nice.
However a nice feture (If you have the time) would be a partition list to choose which to mount?
Click to expand...
Click to collapse
Thanks. Yep, partition list is already on my to-do list. But first i want to get Tethering working before going on with the options. Anyway, source is online at github, so if you like; i'm still taking pull requests.
Bexton said:
Thanks. Yep, partition list is already on my to-do list. But first i want to get Tethering working before going on with the options.
Click to expand...
Click to collapse
Well Tethering would be nice
Bexton said:
Anyway, source is online at github, so if you like; i'm still taking pull requests.
Click to expand...
Click to collapse
Yes well my strong side is PHP, JavaScript and Linux Shell Scripting. Have played some with Java, but not near enough for this (Have looked at it already).
dk_zero-cool said:
Yes well my strong side is PHP, JavaScript [...]
Click to expand...
Click to collapse
Hehe, mine as well. Just reading the Android documentaion carefully brought me with no Java experience to that result. And a Java developer would probably laugh about the app's code. But in the end it works, so what.
Bexton said:
Hehe, mine as well. Just reading the Android documentaion carefully brought me with no Java experience to that result. And a Java developer would probably laugh about the app's code. But in the end it works, so what.
Click to expand...
Click to collapse
Impressive, well perhaps I should read some android documentation.
i clicked on the thanks button but wanted to actually thank you in type. i was getting very tired of taking out my card every time i needed to flash or add something to my card. thanks!
This is nice.
Big thanks Sir, great app
It's not working on http://forum.xda-developers.com/showthread.php?p=20355877
Any help please ?!
Working great on HD2 with ICS beta6 from tytung.
Dutch translation is a bit off though Want me to translate better? Sent me a email or pm!
mori90 said:
It's not working on http://forum.xda-developers.com/showthread.php?p=20355877
Any help please ?!
Click to expand...
Click to collapse
It is working with that rom. the problem is not the apk, but a permission problem with either the superuser.apk or the su binary itself. i fixed it by removing the superuser.apk via shell rm and flashing the signed superuser zip from chains website (http://downloads.androidsu.com/superuser/Superuser-3.0.7-efgh-signed.zip) via recovery. after that root permissions were fixed and the ums app, as well as any other root app (like titanium) worked again.
Hey, nice app, thanks for that
Just a question, can you implement a checkbox (or whatever :-D) to disable the notification while the App is still running?
I know, it isn't the end of the world but I don't like my notification bar "spammed" :-D
itsy said:
Hey, nice app, thanks for that
Just a question, can you implement a checkbox (or whatever :-D) to disable the notification while the App is still running?
I know, it isn't the end of the world but I don't like my notification bar "spammed" :-D
Click to expand...
Click to collapse
GER: Tschuldige, dass muss leider warten. Ich hab die App ohne jegliche Java Kenntnisse geschrieben und jede Änderung bedarf längeren Nachlesens in den Referenzen und dann geht's mit Trial & Error weiter. Zur Zeit will ich erst mal schauen, dass ich Tethering zum laufen bekomme, bevor ich mich den Optionen zuwende.
--------------------
ENG: Sorry, but it will take some time. I wrote the App without any Java experience and every change requires reading the Android references carefully and then trial and error. At the moment my main focus is more on getting tethering working before i'm gonna implement some extra options.
It's funny that i am the one who asks as i wrote this App. But actually i just did a bit of Java coding and i am far away from being a linux fs/udev/mmc/vold expert. So my question to the experts out there: Could somebody please explain me in detail what is the difference between
echo /dev/block/mmcblk0 > /sys/devices/platform/usb_mass_storage/lun0/file
and
echo /dev/block/vold/179:1 > /sys/devices/platform/usb_mass_storage/lun0/file
Because all i see is that both commands to the lunfile mount the sdcard as mass storage..!?
Thanks in advanced!
Bexton said:
It's funny that i am the one who asks as i wrote this App. But actually i just did a bit of Java coding and i am far away from being a linux fs/udev/mmc/vold expert. So my question to the experts out there: Could somebody please explain me in detail what is the difference between
echo /dev/block/mmcblk0 > /sys/devices/platform/usb_mass_storage/lun0/file
and
echo /dev/block/vold/179:1 > /sys/devices/platform/usb_mass_storage/lun0/file
Because all i see is that both commands to the lunfile mount the sdcard as mass storage..!?
Thanks in advanced!
Click to expand...
Click to collapse
There are no difference as both device maps referrers to the same minor and major numbers (Same device). Take a look at this
If you CD to /dev/block and type "ls -la" and then CD to "/dev/block/vold" and type "ls -la" you will in both cases see the numbers "179, 1" right before the date index.
Introducing CyanogenMod for the Asus MeMO Pad HD7
I have been working on CM 10.1 for ME173X for a couple months now, it took me a while as I had never heard of MTK before I got this device. I have come to a good start point for anybody that wants to build for MTK devices.
Anybody should be able to use this source to start building for there own device, so please do not ask if this can be ported, you can build it yourself.
RULES OF THIS THREAD:
1. Do NOT ask for an ETA!
2. Do NOT ask if this can be ported to another device!!!
3. Do NOT PM me with questions about this, if you are trying to develop for another device then comments are welcome.
4. Please use the thanks button instead of posting a thanks reply
Let's keep this as clean as we can to help devs get going and contributing to the development.
This is an alpha build, so expect nothing to work.
Links will be up soon, please be patient.
If you would like to help in the development, you can initialize the repo with this command to get started. For now these are simple changes that should get you to a point that it will boot. The only thing required is for you to set up your device files. This also includes my latest CWM based recovery so it should work for small recovery partitions.
Code:
repo init -u git://github.com/BSydz-MTK/android.git -b cm-10.1
My sources can be found here: http://github.com/BSydz-MTK
Kernel Source can be found here.
Credits: xplodwild, chrmhoffmann, bgcngm
XDA:DevDB Information
CM 10.1 Asus MeMO Pad HD7 Alpha, a ROM for the Android General
Contributors
BSydz
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2014-03-21
Last Updated 2014-03-21
General Installation info
INSTALLATION:
Flash in a custom recovery:
1. Copy zip to sdcard
2. Boot to recovery
3. Make backup
4. Install zip from sdcard
5. Select custom ROM zip
6. Accept install
7. Reboot
8. Enjoy!
Sideload after build:
In same terminal as the build
Code:
adb reboot recovery
In recovery:
Make backup in recovery if needed
Choose Install from sideload
Code:
adb sideload out/target/product/ME173X/cm-10.1-20140322-UNOFFICIAL-ME173X.zip
You will have to change the date according to the date of build.
Change logs and other details
This will be for change logs and details about issues and fixes
General instructions for building
Build Instructions:
1. Build Environment:
You will have to have your Android build environment set up, here is a guide, you do not have to "download the source" at the end.
http://source.android.com/source/initializing.html
2. Create an Android directory on your computer:
This can be named anything you like. I use /CM-10.1-MTK.
3. Open directory in terminal
4. Initialize the repository:
Code:
repo init -u git://github.com/BSydz-MTK/android.git -b cm-10.1
repo sync
After everything is downloaded/synced:
This downloads prebuilt files for CM
Code:
./vendor/cm/get-prebuilts
5. Connect your device to the computer and make sure adb is working
6. Pull files from device: Note: Some files may not have permission so you may have to pull them from the device manually using root explorer or similar.
Code:
cd device/asus/ME173X
./extract-files.sh
cd ../../../
7. Build:
Code:
. build/envsetup.sh && brunch cm_ME173X-eng -j4
Optional Build:
Copy BSydz_ME173X_build.sh to the root of the Android directory, i.e. the dir you created and are using for your build.
This will give you information through out the build, like what step it is at and how long the build took.
Code:
./BSydz_ME173X_build.sh
Most Common Errors:
make: *** No rule to make target
discription:
This simply means that the file that it is being told to build is not where you said it would be.
Solution:
Make sure the file is where it is supposed to be.
First off, this is stellar. I'm pretty sure you just managed to achieve the impossible. You'll go down in history as the man who got Cyanogenmod on a MTK device! Congrats!
Sent from my Galaxy Nexus using xda app-developers app
jrk190 said:
First off, this is stellar. I'm pretty sure you just managed to achieve the impossible. You'll go down in history as the man who got Cyanogenmod on a MTK device! Congrats!
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Thanks, but I am not the only one. Lots of credit goes to xplodwild, chrmhoffmann, and bgcngm. I am just setting it up so that it is accessible to anybody that wants to help. They have made more progress than me as far as getting things working, I just know from experience that if you put the code in front of peoples face, they will be more likely to contribute something to the project. Since we don't have that base to start from, I figured I would put it together and let everybody at it.
Congrats !!!! Would try a build this night !!
Thanks for your work b !!!!
Gesendet von meinem Ascend G510 mit Tapatalk
edit:
short feedback:
The build process runs very clean !!! and ends with no errors. " cm-10.1-20140323-UNOFFICIAL-ME173X.zip "
i think your work is an very good base man
...i had only 15 minutes to playin around with, because i musst work
For the very first cm Alpha on MTK it works very good....
THX again,
sorry did read this now...
Remember this is just a basic boot, nothing works. There is no sound, wifi, bluetooth, and there is still an issue with the mounts and permissions. So the sdcards don't work. I have updated my github and you should be able to build a bootable ROM from it. I will post a link for the flashable ROM after I get a few things taken care of.
Thank you. you get all the goodies. Have no guess. about the beta release.?
Hi BSydz
Nice work!
Download Link?
Gesendet von meinem ME173X mit Tapatalk
awesome news! looking forward to this weeks!!
Sent from my ME173X using xda app-developers app
can someone do some benchmarks?
great work btw!
BSydz
You will that we build the Rom self. But i have only DSL 2000 and its not good for downloading over 10GB! DSL 2000 is 220 KB/s . Slow! Can you give me a download link?
Please.
Sorry for my very very bad english!
Gesendet von meinem HUAWEI G510-0100 mit Tapatalk
spanitzer said:
BSydz
You will that we build the Rom self. But i have only DSL 2000 and its not good for downloading over 10GB! DSL 2000 is 220 KB/s . Slow! Can you give me a download link?
Please.
Sorry for my very very bad english!
Gesendet von meinem HUAWEI G510-0100 mit Tapatalk
Click to expand...
Click to collapse
I will post a ROM soon, just trying to work a few bugs out before I do.
Sent from my WX435 using Tapatalk 2
Ah okay.
Thanks!
Gesendet von meinem ME173X mit Tapatalk
ROM link in download section.
Here is a mirror if you have any issues.
http://www.mediafire.com/download/a3fu2ui4fqkhpbl/cm-10.1-20140325-UNOFFICIAL-ME173X.zip
Thanks!
You are the best!
Gesendet von meinem ME173X mit Tapatalk
Has a way of opening wifi...
Thanks also
The Rom is very very very smooth!
The Wiko Stairway has a MT6589 and CM10.2-11. But Wifi works in Wiko. Can we use some drivers from Wiko?
Gesendet von meinem Ascend G510 mit Tapatalk
spanitzer said:
The Rom is very very very smooth!
The Wiko Stairway has a MT6589 and CM10.2-11. But Wifi works in Wiko. Can we use some drivers from Wiko?
Gesendet von meinem Ascend G510 mit Tapatalk
Click to expand...
Click to collapse
I am working on it. I am going to build cm11 and omni to see if it will work for our device. I am currently modifying CWM 6.0.4.7 to fit on our recovery partition to be able to install them. Once I figure out what needs to be done I can back port it and go from there.
Also our device is mt8125, so there may be slight differences.
Remember I am only one man, and building takes a while between changes. And this is my only tablet so I don't wanna just leave it in dev mode.
Plus I lost all of my backups cause my sdcard just died trying to remove it from my broken SD slot. That will be the last time I use a drywall screw to try to take out my sdcard ... lol.
Please be patient, this is uncharted territory, and this is my first MTK device.
Sent from my ME173X using Tapatalk 2
BSydz said:
I am working on it. I am going to build cm11 and omni to see if it will work for our device. I am currently modifying CWM 6.0.4.7 to fit on our recovery partition to be able to install them. Once I figure out what needs to be done I can back port it and go from there.
Also our device is mt8125, so there may be slight differences.
Remember I am only one man, and building takes a while between changes. And this is my only tablet so I don't wanna just leave it in dev mode.
Plus I lost all of my backups cause my sdcard just died trying to remove it from my broken SD slot. That will be the last time I use a drywall screw to try to take out my sdcard ... lol.
Please be patient, this is uncharted territory, and this is my first MTK device.
Sent from my ME173X using Tapatalk 2
Click to expand...
Click to collapse
I believe that in the Wiki CM thread, that they mentioned that stock kernel only works on CM10.2, not CM11, so try CM10.2/Omni4.3. There's also this: https://gerrit.omnirom.org/#/q/topic:mt6589,n,z on gerrit, perhaps you can try that wifi fix, by renaming it?
There are many android devices without otg cable support.
Today ill show you how to add otg support to your device
Code:
*You have to root your device.
*I am not responsible for anything that happens to your phone
*Your warranty is now void
[*]Root your device as mentioned above
[*]Download the app "USB OTG Helper[ROOT]". (Link below)
[*]Follow the instructions and enjoy
Download
You can download the appHere
Now you can use OTG on your phone
Hit thanks if I helped
And even if I didn't
thanks
Thankss for posting thatss
does it work?
Sent from my A1 using XDA Premium 4 mobile app
90% sure that it'll work.
You can see reviews.
Not working for verizon ellipsis 8(4.2.2 kernel 3.10.1)
Avijit-DEV said:
Thankss for posting thatss
Click to expand...
Click to collapse
Not working for verizon ellipsis 8(4.2.2 kernel 3.10.1)
Someone who wants to test my ROM? This ROM Is quite unlike other Note 3 ROM's. Is based on CyanogenMod.
Kernel in this ROM is the latest sources from Samsung with tweaks.
I am not responsible for bricked devices.
Don't work:
- Need to work more with SELinux.. Have some deniers
- You tell me
What is special about my ROM?
- Newer kernel source
- Lag free experience, because I have focused on GPU-source and PowerHall without overclocking. The key is efficiency
Mod edit: Links removed
Will test this out!
Edit: So far so good, but as mentioned below, battery drain tremendously. Though, it's still WIP so no complaints & thanks for your efforts.
Test and report,good to see different nougat projects
Sent from my SM-N9005 powered by QS-N9005-LP
really smooth rom
cellular data works fine and the rom is really smooth, battery drains real quick and app permissions popup glitches.
recent apps panel look really huge and needs alot of resizing
@christer12 awesome mate. ? Gonna give it a try
What are the bugs?
---------- Post added at 08:03 AM ---------- Previous post was at 08:00 AM ----------
How about battery life?
Nightstreetz said:
cellular data works fine and the rom is really smooth, battery drains real quick and app permissions popup glitches.
recent apps panel look really huge and needs alot of resizing
Click to expand...
Click to collapse
Recent panel is okay. This is what it looks on Android Nougat...:silly:
hey guys what kind of gappss did you use? i used the 7.0 open gapps stock one, but i can't get past the first few steps (select language, wifi and so on) as the play services keep crashing on me. I assume the gapps i use aren't fully compatible.
yka1988 said:
hey guys what kind of gappss did you use? i used the 7.0 open gapps stock one, but i can't get past the first few steps (select language, wifi and so on) as the play services keep crashing on me. I assume the gapps i use aren't fully compatible.
Click to expand...
Click to collapse
you must flash the rom along with gapps at the same time. If you first flash the rom and boot and then flash gapps you will face Google Play service fc's.
so
1. Flash rom
2. Don't boot and flash Android 7.0 gapps (Any)
3. flash supersu.zip if needed
poof done no force close
NImesh Basu said:
you must flash the rom along with gapps at the same time. If you first flash the rom and boot and then flash gapps you will face Google Play service fc's.
so
1. Flash rom
2. Don't boot and flash Android 7.0 gapps (Any)
3. flash supersu.zip if needed
poof done no force close
Click to expand...
Click to collapse
Hi, Thx for your feedback! Thats how i have done it (or how I always do it with AOSP Roms)
That's why I was wondering if I picked some incompatible Gapps by mistake.
May I ask you which one you picked? (Stock, full, mini, ore something else than open Gapps?)
Gesendet von meinem SM-N930F mit Tapatalk
yka1988 said:
Hi, Thx for your feedback! Thats how i have done it (or how I always do it with AOSP Roms)
That's why I was wondering if I picked some incompatible Gapps by mistake.
May I ask you which one you picked? (Stock, full, mini, ore something else than open Gapps?)
Gesendet von meinem SM-N930F mit Tapatalk
Click to expand...
Click to collapse
open gapps nano
I used opengapps arm 7.0 pick and everything worked as expected.
Sent from my SM-N9005 using XDA Free mobile app
supergen007 said:
I used opengapps arm 7.0 pick and everything worked as expected.
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
Thx, for me all worked except for "Stock" for whatever reasons..went ahead and used "full" instead
Gesendet von meinem SM-N9005 mit Tapatalk
ROM is working excellent no FC's or error or anything. Only bug I have is the battery icon can't change, doesn't show percent and may or may not be showing the wrong amount left in the status bar.
Sent from my SM-N9005 using Tapatalk
jamboss said:
ROM is working excellent no FC's or error or anything. Only bug I have is the battery icon can't change, doesn't show percent and may or may not be showing the wrong amount left in the status bar.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
You can't change the battery Icon within the status bar settings that's correct, however you can make the percentage appear within the stock battery icon. Go to settings / status bar / status bar icons". There, i have a setting for showing the percentage at the bottom of the screen, once I pass all the slider options for the icons I want to enable.
Gesendet von meinem SM-N9005 mit Tapatalk
yka1988 said:
Hi, Thx for your feedback! Thats how i have done it (or how I always do it with AOSP Roms)
That's why I was wondering if I picked some incompatible Gapps by mistake.
May I ask you which one you picked? (Stock, full, mini, ore something else than open Gapps?)
Gesendet von meinem SM-N930F mit Tapatalk
Click to expand...
Click to collapse
I think Android Pay is the cause of that trouble.
I'm so exited about CM14 on my note 3. One day i will try it. Have to wait now :/
Two questions.
1. Are there only two devs working on CM14 for note 3?
2. trader418 has one CM14 rom, but not that much time to work on it.
Can't you two collaborate on one rom, or at least a stable base that you can then work on separately if you which?
I'm asking this for as a user and not a developer this make sense.
Two cooks can be a good thing. :good:
Thanks for this rom m8.
Tesla said:
I'm so exited about CM14 on my note 3. One day i will try it. Have to wait now :/
Two questions.
1. Are there only two devs working on CM14 for note 3?
2. trader418 has one CM14 rom, but not that much time to work on it.
Can't you two collaborate on one rom, or at least a stable base that you can then work on separately if you which?
I'm asking this for as a user and not a developer this make sense.
Two cooks can be a good thing. :good:
Thanks for this rom m8.
Click to expand...
Click to collapse
This ROM is stable as hell and everything I have tried so far is working. Battery icon reads the correct info and the percent is showing in the icon. ROM is perfect.
Sent from my SM-N9005 using Tapatalk
Great rom mate. Hopefully you'll be able to fix permission pop up glitch and video camera bug.
Rom is so smotth and stable, no random reboot or force close either...
flashed and everything works perfect..christer you do great work..well done from me
by the way is there any way to change dpi on this rom?
Hi to all elephone u pro users
I've good news, for me on android 9 face unlock seems to be working. Activate google smart lock trust agent, then you've got a new menu smart lock in security. Tap it and follow the instructions. Further more you'll find voice unlock.....
Further more it seems a quiet good running system, I've taken descendent onedotfour rom, open gapps, new health service app, nova launcher, some system files updates and some additional apps and mods......
Descendent has got a tuning menu, try it.
It should be working when you flash the TWRP boot.img via adb and then via twrp delete system cache dalvik and data then restore the system with the system backup (decompress my system file in your twrp sub folder!). you have to reinstall magisk over twrp.
The files you'll find here:..x..
The Gcam in this folder is working fine...
May you wanna try, but of course all on your own risk.....
If you've troubles lets discuss here
Thanks to skeleton1911 and to descendent developers :good:
Bluetooth in call was working but only short time, now it isn't working anymore. I've tried some things but I didn't find a solution.
May be someone else find out what to do......
Nice work.
If you want I can tell you how you can make it as system.img.
( just contact me on messenger)
Laptapper said:
Hi to all elephone u pro users
I've good news, for me on android 9 face unlock seems to be working. Activate google smart lock trust agent, then you've got a new menu smart lock in security. Tap it and follow the instructions. Further more you'll find voice unlock.....
Further more it seems a quiet good running system, I've taken descendent onedotfour rom, open gapps, new health service app, nova launcher, some system files updates and some additional apps and mods......
Descendent has got a tuning menu, try it.
It should be working when you flash the TWRP boot.img via adb and then via twrp delete system cache dalvik and data then restore the system with the system backup (decompress my system file in your twrp sub folder!). you have to reinstall magisk over twrp.
The files you'll find here:
https://drive.google.com/open?id=1GkmwP4R3LPqADXKRO89CiQlqUiLnQ3RM
The Gcam in this folder is working fine...
May you wanna try, but of course all on your own risk.....
If you've troubles lets discuss here
Thanks to skeleton1911 and to descendent developers :good:
Click to expand...
Click to collapse
Gesendet von meinem Elephone P8000 mit Tapatalk
Laptapper said:
Hi to all elephone u pro users
I've good news, for me on android 9 face unlock seems to be working. Activate google smart lock trust agent, then you've got a new menu smart lock in security. Tap it and follow the instructions. Further more you'll find voice unlock.....
Further more it seems a quiet good running system, I've taken descendent onedotfour rom, open gapps, new health service app, nova launcher, some system files updates and some additional apps and mods......
Descendent has got a tuning menu, try it.
It should be working when you flash the TWRP boot.img via adb and then via twrp delete system cache dalvik and data then restore the system with the system backup (decompress my system file in your twrp sub folder!). you have to reinstall magisk over twrp.
The files you'll find here:
https://drive.google.com/open?id=1GkmwP4R3LPqADXKRO89CiQlqUiLnQ3RM
The Gcam in this folder is working fine...
May you wanna try, but of course all on your own risk.....
If you've troubles lets discuss here
Thanks to skeleton1911 and to descendent developers :good:
Click to expand...
Click to collapse
Thanks great work :good:
Sent from my U_Pro using XDA Labs
skeleton1911 said:
Nice work.
If you want I can tell you how you can make it as system.img.
( just contact me on messenger)
Gesendet von meinem Elephone P8000 mit Tapatalk
Click to expand...
Click to collapse
Hi Skeleton
May you can build this flash file?
Laptapper said:
Hi Skeleton
May you can build this flash file?
Click to expand...
Click to collapse
I can teach you , how you do it.
Send me a message on messenger...
Gesendet von meinem Elephone P8000 mit Tapatalk
i hope for a step by step docu
@Laptapper I'm going to test this today. Excited to see more development for our U Pro. Thanks.
Hi @Laptapper,
I wanna know if your rom is fully functional (bluetooth, nfc, hotspot, battery endurance, etc.) and useful as well as Eragon 10.3.
Thanks
Inviato dal mio U_Pro utilizzando Tapatalk
Lukas2702 said:
Hi @Laptapper,
I wanna know if your rom is fully functional (bluetooth, nfc, hotspot, battery endurance, etc.) and useful as well as Eragon 10.3.
Thanks
Inviato dal mio U_Pro utilizzando Tapatalk
Click to expand...
Click to collapse
At the moment bluetooth seems to be not working, it was working only a short time. May be someone else can help?
The battery and smoothness looks very great. Try and give feedback for bugs. We can optimize all together to get a fully working pie system. ROM based on oreo (like eragon) didn't have problems but it's oreo and many people want to have pie, so we have to develop together.
Laptapper said:
At the moment bluetooth seems to be not working, it was working only a short time. May be someone else can help?
The battery and smoothness looks very great. Try and give feedback for bugs. We can optimize all together to get a fully working pie system. ROM based on oreo (like eragon) didn't have problems but it's oreo and many people want to have pie, so we have to develop together.
Click to expand...
Click to collapse
Thanks for your answer. In this moment I can't try this rom because I need working bluetooth. Sorry
Inviato dal mio U_Pro utilizzando Tapatalk
Lukas2702 said:
Thanks for your answer. In this moment I can't try this rom because I need working bluetooth. Sorry
Inviato dal mio U_Pro utilizzando Tapatalk
Click to expand...
Click to collapse
Bluetooth is working in new mod 8.1
https://forum.xda-developers.com/an...phone-pro-rom-8-1-rrmod-resurrection-t3873669
Thread closed per OP's request.