[Q] reattaching digitizer - General Questions and Answers

hi., i am new to this site and i just wanna ask something regarding htc sensation xe's digitizer.
My phone's digitizer has its adhesive loose.. it it possible to reapply adhesive and return the same digitizer in the phone? my digitizer is in good shape and i just wanted it to be fit so that no dust could enter in the lcd.

Related

cracked screen?

I recently cracked my screen on my tp2 and was wondering if there was a way i could tell if it just the screen or the lcd under the glass.
you might want to consider replacing both the LCD and digitizer because they are stuck togeter with some kind of glue, I tried to just replace the digitizer and ended up pulling the whole front off the LCD screen its self. also ended up taring my LCD cable too so be careful

LCD replacement without removing digitizer

I've a Sensation with a broken LCD but working digitizer. All the movies on Youtube shows tutorials where first the digitizer is removed. There's only one movie that goes further and after removing the digitizer they removed the LCD. Look this at 7:42. http://www.youtube.com/watch?v=gO9MnQRa7xQ
I've also replaced a LCD of a HTC Desire, but there I can replace the LCD without removing the digitizer. That saved me a lot of time. Can anyone says this is also possible at the sensation or the de LCD only been removed from the front and not from the back.
The digitiser is physically adhered to the LCD screen so no, you will have to remove the digitiser before you can replace the screen.
boomboomer said:
The digitiser is physically adhered to the LCD screen so no, you will have to remove the digitiser before you can replace the screen.
Click to expand...
Click to collapse
Oke, thank you.
boomboomer said:
The digitiser is physically adhered to the LCD screen so no, you will have to remove the digitiser before you can replace the screen.
Click to expand...
Click to collapse
Well I read somewhere on here that it's just held by 3M stickies. What do you make of that?
dgenx210 said:
Well I read somewhere on here that it's just held by 3M stickies. What do you make of that?
Click to expand...
Click to collapse
Yes, quite true - 30 seconds warming with a hair dryer and using a scalpel blade you can prise the digitiser carefully off the LCD screen.
The 3M tape makes it easy to replace the front glass but does allow dust to collect between the two layers.
anyone knows how to glue - paste the digitizer on the new LCD? I can't find 3M tape with the shape of a Sensation, only for different models. So I need to cut some parts, but that will follow in a lot of dust between the two parts after a few months.
Is there a way to occur this?

[Q] screen fall off after replacement

hello
i replaced my touch screen on my sensation xe (alone!!)
and it works ok!
the problem is that it's not glued to the device.
if i turn it over, the toch will go out and stay connected only because of the electronic connection.
what can i do so the screen will stay stuck on it's place???
?
anyone?!?!?!?!?
odedc said:
anyone?!?!?!?!?
Click to expand...
Click to collapse
Lol what about double sided 3m tape.
To be honest I have a sensation here with a cracked screen and a digitizer but I am waiting on parts and that tape.
What baffles me is why don't they sell it with the tape???? I bought a dirt cheap digitizer for cheap tablet and it came with that tape on the digitizer, no cutting or other crap .. just had the remove the paper thing and stick it on

[Q] Nokia Lumia 1520 Digitizer Replacement

Need help here please. Is it possible to replace just the screen glass digitizer of a Nokia Lumia 1520? How? Thanks.
jayymdt said:
Need help here please. Is it possible to replace just the screen glass digitizer of a Nokia Lumia 1520? How? Thanks.
Click to expand...
Click to collapse
alray said:
Click to expand...
Click to collapse
Thank you but this are all screen digitizer with LCD screen display replacements or the full assembly. What I'm looking for is the screen glass digitizer replacement only without the LCD screen display. Because my LCD screen display is still working.
jayymdt said:
Thank you but this are all screen digitizer with LCD screen display replacements or the full assembly. What I'm looking for is the screen glass digitizer replacement only without the LCD screen display. Because my LCD screen display is still working.
Click to expand...
Click to collapse
replacing the digitizer is the same procedure + you'll have to separate the digitizer from the lcd (when the assy is removed) which is very difficult to do. The digitizer is glued in place and you'll probably end up with a broken lcd. I would suggest to replace the assy instead of just the digitizer. Yes, I know, the digitizer is only 20-40$ and the complete assy is 170-200$.
It worth a try but be mentally prepared to spend 200$ more just in case...
here is one example how you do it: https://www.youtube.com/watch?v=MMXA8KyHaFE
then you'll need to clean the lcd from the glue using a glue remover and a blade, being careful not to damage the lcd
and finally apply liquid glue back to the lcd and install the new digitizer and reassemble the whole thing.
alray said:
Click to expand...
Click to collapse
alray said:
replacing the digitizer is the same procedure + you'll have to separate the digitizer from the lcd (when the assy is removed) which is very difficult to do. The digitizer is glued in place and you'll probably end up with a broken lcd. I would suggest to replace the assy instead of just the digitizer. Yes, I know, the digitizer is only 20-40$ and the complete assy is 170-200$.
It worth a try but be mentally prepared to spend 200$ more just in case...
here is one example how you do it: https://www.youtube.com/watch?v=MMXA8KyHaFE
then you'll need to clean the lcd from the glue using a glue remover and a blade, being careful not to damage the lcd
and finally apply liquid glue back to the lcd and install the new digitizer and reassemble the whole thing.
Click to expand...
Click to collapse
I've seen that many have bought the said replacement so I guess it is really possible. It is just not that easy. I've checked other forums and they as well are waiting for a proper video. But thank you for you this.

Htc m9ew me replacement screen digitizer

Hi,
Can anyone tell me where I can buy a new complete digitizer screen? Not just the glass, as I have bought the glass not realizing I need the digitizer itself as they can't be split without damaging the digitizer itself as its glued to glass screen and they can't separated.
Thanks
Can anyone tell me how to even begin opening this up? whatguide do you follow for that please
aliexpress.com
aliexpress.com
I found HTC One ME LCD here
Although there are out of stock right now except they will become available next days as they say.
brapa.com/HTC-One-ME-(ME9-M9et-M9ew-Hima-Ace)-LCD-Display-Touchscreen-ditizer-scherm-glasplaat-fronje-unit
Good luck

Categories

Resources