Hello,
I have been crack flashing for a long time, but when I got the Droid Maxx from verizon I was disappointed at the lack of an unlocked bootloader. I had been running safestrap and was getting the phone ready to return for a refund so I can get the developer edition.
So, it looks like using safestrap I completely wiped the system partition. I can get the phone to boot to flashboot mode or to the safestrap flash screen but that is all.
Using RSDlite I attempted to flash 12.9.0, but get the return message "Failed flashing process. 2/17 flash partition "gpt.bin" -> Phone returned FAIL. On the phone it said:
"downgraded security version
update gpt_main version failed
preflash validation failed for GPT."
So it looks like the issue might be because I am flashing the FXZ file for 12.15.15, but I cannot find the FXZ file for it.
I also tried using House of Moto. Attached is a screen shot of what I get.
So basically it looks like I have no ROM whatsoever. Is there a way out of this so I can return the phone for a refund?
Thanks in advance!
I realized that I had not set things up correctly for House of Moto, I ran it, and boot.img, system.img, and motoboot.img are not loading because they are from the previous image and it will not allow a downgrade.
So, I guess I need to get the factory image of the latest update, or perhaps get those *.img files from someone with a working phone and drop them in to folder before flashing.
Anyone have the factory image after the OTA? Or perhaps the missing files I need (if dropping them will actually work, of course)?
kclantz said:
I realized that I had not set things up correctly for House of Moto, I ran it, and boot.img, system.img, and motoboot.img are not loading because they are from the previous image and it will not allow a downgrade.
So, I guess I need to get the factory image of the latest update, or perhaps get those *.img files from someone with a working phone and drop them in to folder before flashing.
Anyone have the factory image after the OTA? Or perhaps the missing files I need (if dropping them will actually work, of course)?
Click to expand...
Click to collapse
,
I am having the same problem only I am on the Droid Ultra and not the Maxx, I too need the files for the latest OTA because the two older files are supposedly out dated for me, i get a bunch of failures. What sucks is some files were clearly restored because it erased Safestrap and now i have stock recovery but it didn't restore the OS or anything so i cannot boot up into anything but fastboot....hopefully someone uploads the latest ota to the site or even the forums....good luck to you. i need it as well.
ahjee said:
,
I am having the same problem only I am on the Droid Ultra and not the Maxx, I too need the files for the latest OTA because the two older files are supposedly out dated for me, i get a bunch of failures. What sucks is some files were clearly restored because it erased Safestrap and now i have stock recovery but it didn't restore the OS or anything so i cannot boot up into anything but fastboot....hopefully someone uploads the latest ota to the site or even the forums....good luck to you. i need it as well.
Click to expand...
Click to collapse
I'm in the same boat, but not quite as bad. I've got the mini, and it boots into the normal mode, but not all things work - touchless controls crash every time I try to open it, and my calendars won't sync. My recovery is gone, when I try to boot into it, I get an android logo with it's chest open with a red triangle.
I tried using RSD Lite and fastboot with the original stock image files, but the result are the same. I'm going to hold out for someone to post an image with the OTA included or another workaround. Amazing how we got the same problems at roughly the same time after the OTA.
rds217 said:
I'm in the same boat, but not quite as bad. I've got the mini, and it boots into the normal mode, but not all things work - touchless controls crash every time I try to open it, and my calendars won't sync. My recovery is gone, when I try to boot into it, I get an android logo with it's chest open with a red triangle.
I tried using RSD Lite and fastboot with the original stock image files, but the result are the same. I'm going to hold out for someone to post an image with the OTA included or another workaround. Amazing how we got the same problems at roughly the same time after the OTA.
Click to expand...
Click to collapse
if yours boots into the OS maybe you can still root it, after you root it you can then modify system apps, getting rid of touchless control and then reinstall it, may fix the force close. also if you manage to gain root you could install safestrap. the android with the triangle is the stock recovery, i forget what buttons or button combination you have to hit to make the menu appear but that is the stock recovery by what you're describing
So I just got back from the Verizon store, I went in to see if they could flash the files I need. They told me they couldn't but gave me a number at motorola to see if they would e-mail the files to me.
Unfortunately that didn't work. Motorola said I could send the phone in for a repair, and that was my only option.
I think I'll take the second option and wait until someone posts the files and flash them with RSD Lite.
I just hope that happens soon, as I am wanting to return the phone and get the developer edition. I have until Saturday to return it and I doubt they will give me a refund with it in this state.
ahjee said:
if yours boots into the OS maybe you can still root it, after you root it you can then modify system apps, getting rid of touchless control and then reinstall it, may fix the force close. also if you manage to gain root you could install safestrap. the android with the triangle is the stock recovery, i forget what buttons or button combination you have to hit to make the menu appear but that is the stock recovery by what you're describing
Click to expand...
Click to collapse
Here's the issue, I can't boot into write-protected off mode. When I tried running HouseOfMoto, I flashed stock recovery for pre-OTA; since I received the OTA, I can't install PwnMyMoto, which is what gave me the write-protection off mode in the first place. Now when I go from the bootloader into recovery, I get the dead android + red triangle, what you call stock recovery.
I have root level access, but it's all but useless since the system is write protected. In other words, no Safestrap. I'll have to live with what I've got until someone finds time and reason to upload the post-OTA image or something newer.
Edit: Fixed it, maybe it will work for you guys. Check the PwnMyMoto thread for the source, I can't post it due to being new.
jcase said:
If you used 1.1 and have a problem with recovery coming back, run the following command:
adb shell su -c "dd if=/dev/block/platform/msm_sdcc.1/by-name/boot of=/dev/block/platform/msm_sdcc.1/by-name/recovery"
Click to expand...
Click to collapse
rds217 said:
Here's the issue, I can't boot into write-protected off mode. When I tried running HouseOfMoto, I flashed stock recovery for pre-OTA; since I received the OTA, I can't install PwnMyMoto, which is what gave me the write-protection off mode in the first place. Now when I go from the bootloader into recovery, I get the dead android + red triangle, what you call stock recovery.
I have root level access, but it's all but useless since the system is write protected. In other words, no Safestrap. I'll have to live with what I've got until someone finds time and reason to upload the post-OTA image or something newer.
Edit: Fixed it, maybe it will work for you guys. Check the PwnMyMoto thread for the source, I can't post it due to being new.
Click to expand...
Click to collapse
With my issue I cannot even get to the point where I can use ADB. I am pretty much stuck with fastboot commands. I can get the bootloader and stock recovery, but nothing more.
Is there something that I can edit in the update file that would allow the version downgrade test to pass? I've played around with the XML file, but I am not having much luck.
kclantz said:
With my issue I cannot even get to the point where I can use ADB. I am pretty much stuck with fastboot commands. I can get the bootloader and stock recovery, but nothing more.
Is there something that I can edit in the update file that would allow the version downgrade test to pass? I've played around with the XML file, but I am not having much luck.
Click to expand...
Click to collapse
Your only current options are to wait for a newer FXZ or have Motorola perform a repair on it.
Sent from my SCH-I605 using Tapatalk
erishasnobattery said:
Your only current options are to wait for a newer FXZ or have Motorola perform a repair on it.
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Thanks, that was what I was afraid of. I guess now I will check obsessively for the new FXZ files. Got have some way to spend my day (you know, as opposed to doing my job ).
Related
So I couldn't find my issue on google, and I read somewhere I should just start a thread since this seems...complicated.
I also read that the tablet only supports USB3.0 ports for this stuff, and IRONICALLY I was always using one.
Anyway, so I "unLocked" my boot loader from my android 4.1.1, then I installed CWM recovery, and flashed a 4.2.2 ROM. However, I hated the keyboard on that ROM, and I liked the menus more on the stock ROM, so I decided to switch back to that and see if I could just customize the latest ROM or something.
So I got the US 4.2.1 ROM from ASUS' firmware downloads page, and flashed it fine. I can use the tablet fully, no problem. I copied the files to root it onto my internal memory since I figured I would do it later. I try to boot it into RCK, there is no USB option(I figured that's normal since it wasn't plugged in). I select RCK, it's loading for a minuted, then the android is on the ground and there was some kind of exclamation mark above his open corpse. (I figure there's not too many errors like that, if you need more specifics I'll check it out again.
I thought maybe it needed a USB connection to load the RCK, but long story short I never have a USB option and RCK won't load, but android itself is fine. I thought maybe I needed the USB debugging(I turned that off momentarily after I had the ROM), I tried turning that back on, but no luck.
Any ideas?
Or tips. Tips are cool.
Rojikku said:
So I couldn't find my issue on google, and I read somewhere I should just start a thread since this seems...complicated.
I also read that the tablet only supports USB3.0 ports for this stuff, and IRONICALLY I was always using one.
Anyway, so I "unLocked" my boot loader from my android 4.1.1, then I installed CWM recovery, and flashed a 4.2.2 ROM. However, I hated the keyboard on that ROM, and I liked the menus more on the stock ROM, so I decided to switch back to that and see if I could just customize the latest ROM or something.
So I got the US 4.2.1 ROM from ASUS' firmware downloads page, and flashed it fine. I can use the tablet fully, no problem. I copied the files to root it onto my internal memory since I figured I would do it later. I try to boot it into RCK, there is no USB option(I figured that's normal since it wasn't plugged in). I select RCK, it's loading for a minuted, then the android is on the ground and there was some kind of exclamation mark above his open corpse. (I figure there's not too many errors like that, if you need more specifics I'll check it out again.
I thought maybe it needed a USB connection to load the RCK, but long story short I never have a USB option and RCK won't load, but android itself is fine. I thought maybe I needed the USB debugging(I turned that off momentarily after I had the ROM), I tried turning that back on, but no luck.
Any ideas?
Or tips. Tips are cool.
Click to expand...
Click to collapse
First I use usb 2.0 as I have no 3.0 ports and have no problems (just for info).
The 4.2 update changed the bootloader menu. Now when you enter the menu if you do nothing it will automatically enter fastboot - watch the upper left for a message. You will need usb debugging. I suggest leaving it turned on as you never know when there will be an issue and you can't get into the os to turn it on.
Good Luck!
Rojikku said:
So I couldn't find my issue on google, and I read somewhere I should just start a thread since this seems...complicated.
I also read that the tablet only supports USB3.0 ports for this stuff, and IRONICALLY I was always using one.
Anyway, so I "unLocked" my boot loader from my android 4.1.1, then I installed CWM recovery, and flashed a 4.2.2 ROM. However, I hated the keyboard on that ROM, and I liked the menus more on the stock ROM, so I decided to switch back to that and see if I could just customize the latest ROM or something.
So I got the US 4.2.1 ROM from ASUS' firmware downloads page, and flashed it fine. I can use the tablet fully, no problem. I copied the files to root it onto my internal memory since I figured I would do it later. I try to boot it into RCK, there is no USB option(I figured that's normal since it wasn't plugged in). I select RCK, it's loading for a minuted, then the android is on the ground and there was some kind of exclamation mark above his open corpse. (I figure there's not too many errors like that, if you need more specifics I'll check it out again.
I thought maybe it needed a USB connection to load the RCK, but long story short I never have a USB option and RCK won't load, but android itself is fine. I thought maybe I needed the USB debugging(I turned that off momentarily after I had the ROM), I tried turning that back on, but no luck.
Any ideas?
Or tips. Tips are cool.
Click to expand...
Click to collapse
You lost your version of Cwm when you flashed the official update.
You will need to find the version of TWRP that is posted on here that has been modified to work with new bootloader and flash it thru fastboot.
tobdaryl said:
First I use usb 2.0 as I have no 3.0 ports and have no problems (just for info).
The 4.2 update changed the bootloader menu. Now when you enter the menu if you do nothing it will automatically enter fastboot - watch the upper left for a message. You will need usb debugging. I suggest leaving it turned on as you never know when there will be an issue and you can't get into the os to turn it on.
Good Luck!
Click to expand...
Click to collapse
Thanks! That was INCREDIBLY helpful. I noticed that message but I didn't know what it meant. Funny the solution was so obvious...
flumpster said:
You lost your version of Cwm when you flashed the official update.
You will need to find the version of TWRP that is posted on here that has been modified to work with new bootloader and flash it thru fastboot.
Click to expand...
Click to collapse
Alright, thanks. I have no idea how that works, but if that's what I need to do to fix it whatever. xD
Rojikku said:
Thanks! That was INCREDIBLY helpful. I noticed that message but I didn't know what it meant. Funny the solution was so obvious...
Alright, thanks. I have no idea how that works, but if that's what I need to do to fix it whatever. xD
Click to expand...
Click to collapse
The twrp mentioned above can be found here.
tobdaryl said:
The twrp mentioned above can be found here.[/URL]
Click to expand...
Click to collapse
Thanks... I actually installed openrecovery-twrp-2.2.2.0-tf300t-JB.blob
On that note, I get a password prompt every time I boot into it. I read somewhere wiping and reinstalling helped with that, but even after wiping everything with every button I had I could still boot and everything was there...
And since APPARENTLY my internal storage isn't good enough, I can't install a 4.2.2 ROM(I'm still debating what ROM I will end up using.) I can't find anything in TWRP...
EDIT: To clarify, I can't find anything under / or /sdcard where I would normally find stuff.
Rojikku said:
Thanks... I actually installed openrecovery-twrp-2.2.2.0-tf300t-JB.blob
On that note, I get a password prompt every time I boot into it. I read somewhere wiping and reinstalling helped with that, but even after wiping everything with every button I had I could still boot and everything was there...
And since APPARENTLY my internal storage isn't good enough, I can't install a 4.2.2 ROM(I'm still debating what ROM I will end up using.) I can't find anything in TWRP...
EDIT: To clarify, I can't find anything under / or /sdcard where I would normally find stuff.
Click to expand...
Click to collapse
Wrong twrp! You need openrecovery-twrp-2.4.4.0-tf300t-4.2.blob until you are off stock 4.2 then you need openrecovery-twrp-2.4.4.0-tf300t-JB.blob. Unless the rom you flash is also for 4.2 bootloader. Both are located at teamwin.
4.2 changes directories in your sdcard for multi-user operation. Look under the 0 directory in /sdcard/0.
The password is for encryption that 4.2 uses to provide multi-user. The /sdcard allows total freedom under normal roms(even without root) but to stop user interaction 4.2 encrypts for user restriction. The first user gets directory 0 and so on.
Flash the proper twrp for 4.2 stock.
As far as flashing a new rom look at the op and determine if it is for the new stock 4.2 bootloader. If not do not flash over 4.2 but downgrade first. I have upgraded from 10.4.2.20 to stock 4.2 and downgraded from stock 4.2 to 10.4.2.20 several times without issue.
Stock 4.2 includes an assert to only allow upgrade from 10.4.2.20.
tobdaryl said:
Wrong twrp! [/URL]You need openrecovery-twrp-2.4.4.0-tf300t-4.2.blob until you are off 4.2 then you need openrecovery-twrp-2.4.4.0-tf300t-JB.blob. Both are located at teamwin.[/URL]
4.2 changes directories in your sdcard for multi-user operation. Look under the 0 directory in /sdcard/0.
The password is for encryption that 4.2 uses to provide multi-user. The /sdcard allows total freedom under normal roms(even without root) but to stop user interaction 4.2 encrypts for user restriction. The first user gets directory 0 and so on.
Flash the proper twrp for 4.2 stock and hold a minute or you are going right back where you were or worse. You need slightly more info before going forward and I need to check my notes while you get the proper twrp flashed.
Click to expand...
Click to collapse
Yeah, I really don't know that much about all this. I'd basically barely used android before I got this tablet a couple days ago, so I only have two days worth of experience...and I didn't get to use it a horribly large amount.
You seem like you're going to help a lot though, so thanks in advance. xD I'll get to flashing that twrp.
Rojikku said:
Yeah, I really don't know that much about all this. I'd basically barely used android before I got this tablet a couple days ago, so I only have two days worth of experience...and I didn't get to use it a horribly large amount.
You seem like you're going to help a lot though, so thanks in advance. xD I'll get to flashing that twrp.
Click to expand...
Click to collapse
I'll try but this new stock 4.2 is a new animal with many changes and we are just learning.
tobdaryl said:
I'll try but this new stock 4.2 is a new animal with many changes and we are just learning.
Click to expand...
Click to collapse
It actually was stock 4.1.1 >>; I just upgraded it. WHICH APPARENTLY WAS A HORRID DECISION. Regardless, I'm trying to install my twrp.img file, ran the command, and it's been writing for like ten minutes... 7672KB. I'm not certain if it's still writing or not...but it claims to be.
Rojikku said:
It actually was stock 4.1.1 >>; I just upgraded it. WHICH APPARENTLY WAS A HORRID DECISION. Regardless, I'm trying to install my twrp.img file, ran the command, and it's been writing for like ten minutes... 7672KB. I'm not certain if it's still writing or not...but it claims to be.
Click to expand...
Click to collapse
OK. Sometimes it takes seconds and sometimes longer. When you upgraded you used 4.2 (10.6.1.8)?
tobdaryl said:
OK. Sometimes it takes seconds and sometimes longer. When you upgraded you used 4.2 (10.6.1.8)?
Click to expand...
Click to collapse
Uhm. First. ****. It was frozen, so I canceled it and restarted it(Been a good twenty minutes doing nothing). Is it safe to reboot my tablet? I can't restart it, fastboot crashes. >>; Restart? Leave it? What?
I decided to take the risk and reboot it. Everything fine. I flashed the tool, ran the reboot command(Which actually didn't work... >>; But I rebooted it manually and it seems fine...)
On that note, is it actually possible to destroy a device beyond repair accidentally? And the TWRP tool said it flashed fine but I still have the old version. Odd....
I do have the image you said currently installed, I checked the version against my download.
Rojikku said:
Uhm. First. ****. It was frozen, so I canceled it and restarted it(Been a good twenty minutes doing nothing). Is it safe to reboot my tablet? I can't restart it, fastboot crashes. >>; Restart? Leave it? What?
Click to expand...
Click to collapse
I'm not sure where you are reading the above. Tell me your current situation and what rom you were on when you began this flash.
tobdaryl said:
I'm not sure where you are reading the above. Tell me your current situation and what rom you were on when you began this flash.
Click to expand...
Click to collapse
I originally flashed the ROM image of TF300T_US_epaduser_10_6_1_8_SDupdate, and I can still boot into that fine. I tried to install the RCK tool you recommended, but it froze. I did a ctrl+c, and then coldbooted the tablet. I tried to do it again, said it was fine, nothing happened. So I think "Maybe I need to boot into the OS and retry it after rebooting from there." So I do that, and now the recovery is frozen again. my command is fastboot -i 0x0b05 flash recovery twrp.img.
That the info you needed?
Rojikku said:
I originally flashed the ROM image of TF300T_US_epaduser_10_6_1_8_SDupdate, and I can still boot into that fine. I tried to install the RCK tool you recommended, but it froze. I did a ctrl+c, and then coldbooted the tablet. I tried to do it again, said it was fine, nothing happened. So I think "Maybe I need to boot into the OS and retry it after rebooting from there." So I do that, and now the recovery is frozen again. my command is fastboot -i 0x0b05 flash recovery twrp.img.
That the info you needed?
Click to expand...
Click to collapse
Go back and check my previous post with the links for twrp, I specified use of blob files. Either should work but some units seem to have an issue with img files. Also check that you have usb debugging turned on in developer options.
tobdaryl said:
Go back and check my previous post with the links for twrp, I specified use of blob files. Either should work but some units seem to have an issue with img files. Also check that you have usb debugging turned on in developer options.
Click to expand...
Click to collapse
I downloaded the .blob version now. That one worked fine. I guess it either didn't like the .img or my download was a bit corrupt.
I now have TWRP version 2.4.4.0.It still wants a password I never set though. I was just finishing making sure it actually worked as you posted.
Rojikku said:
I downloaded the .blob version now. That one worked fine. I guess it either didn't like the .img or my download was a bit corrupt.
I now have TWRP version 2.4.4.0.It still wants a password I never set though. I was just finishing making sure it actually worked as you posted.
Click to expand...
Click to collapse
When it asks for the password hit cancel and just ignore the error.
tobdaryl said:
When it asks for the password hit cancel and just ignore the error.
Click to expand...
Click to collapse
Okay. THEN what do I do? It doesn't seem to detect an OS even though I can boot into one. I can't find my ROM.zip in there and I'm not sure what to do from there... If I could find the ROM I would be fine, possibly. I'm trying to flash this one http://fitsnugly.euroskank.com/?rom=cm10&device=tf300t just to see if it works right. (I want it to show my dock's battery and have the overclocking menu in that drag-up interface.)
Rojikku said:
Okay. THEN what do I do? It doesn't seem to detect an OS even though I can boot into one. I can't find my ROM.zip in there and I'm not sure what to do from there... If I could find the ROM I would be fine, possibly. I'm trying to flash this one http://fitsnugly.euroskank.com/?rom=cm10&device=tf300t just to see if it works right. (I want it to show my dock's battery and have the overclocking menu in that drag-up interface.)
Click to expand...
Click to collapse
Thanks for the link. I looked at the info provided for that rom. You don't want to flash that over an encrypted tablet which you now have. The only safe way I have found to go to or from stock 4.2 rom is with stock 10.4.2.20.
To do that you would flash 10.4.2.20 with twrp, boot into os, reboot back to the bootloader which will now be four icons, select usb, use fastboot to flash twrp again, and now flash your new rom.
This sounds long but removes encryption from your tablet and you should be able to flash the jb rom of choice that does not require stock 4.2 bootloader.
Hey guys, running a stock build on my Droid Ultra (Mini).
Performed this root method on my droid (http://forum.xda-developers.com/showthread.php?t=2442585)
Had become aware that an OTA update was underway so I unrooted (chose the unroot option in SuperSU ) and left it to charge on the QI charger.
Just woke up to find it constantly restarting and (of course what woke me up is the initial vibrate startup.) What's going on? And where did I go wrong .
Nickrick2641 said:
Hey guys, running a stock build on my Droid Ultra (Mini).
Performed this root method on my droid (http://forum.xda-developers.com/showthread.php?t=2442585)
Had become aware that an OTA update was underway so I unrooted (chose the unroot option in SuperSU ) and left it to charge on the QI charger.
Just woke up to find it constantly restarting and (of course what woke me up is the initial vibrate startup.) What's going on? And where did I go wrong .
Click to expand...
Click to collapse
It may have to do with using the unroot method you chose...you can return to stock using RSD Lite or I believe there is another method by the name of houseofmoto or something similar
Sent from my XT1080 using Tapatalk
ahjee said:
It may have to do with using the unroot method you chose...you can return to stock using RSD Lite or I believe there is another method by the name of houseofmoto or something similar
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
RSD Lite fails multiple times, to my disadvantage. But the weird thing is that it fully boots onto Android, and within 35 seconds the "shutting down" prompt comes up (the OTA update is trying I guess... ) But how can i cancel the OTA ? it just lets it boot up then shut down , but it hasn't damaged anything in terms of the OS itself or the boot sectors as far as I can tell.
Your phone is boot looping. It's easier to get help if you know the term.
Look at the houseofmoto thread. It will help you flash back to stock, but save your data and apps.
Samurai, the developer of the app, has been helping people stuck in a boot loop. The guy deserves a medal.
---------- Post added at 05:46 PM ---------- Previous post was at 05:43 PM ----------
Oops, forgot the link.
http://forum.xda-developers.com/showthread.php?t=2450702
Nickrick2641 said:
RSD Lite fails multiple times, to my disadvantage. But the weird thing is that it fully boots onto Android, and within 35 seconds the "shutting down" prompt comes up (the OTA update is trying I guess... ) But how can i cancel the OTA ? it just lets it boot up then shut down , but it hasn't damaged anything in terms of the OS itself or the boot sectors as far as I can tell.
Click to expand...
Click to collapse
if RSD Lite fails...it could be because you are not editing the xml file within the zip you download in order to restore the stock firmware.
You should use this site here http://sbf.droid-developers.org/obake/list.php and download the stock file. The first and third files are the two stock firmwares for the Ultra and the second for the Maxx. The first file is the original out of the box firmware and the third is the first OTA we received neither is the latest firmware.
Anyway, once you download the firmware of your choice you have to extract it and then find the xml file within, edit the xml file, you must remove the gevtar line within the xml, just delete the whole line of text that has the word gevtar in it, after that just save the file as is.
Now you can go to RSDLite, chose the edited XML file, boot your phone into fastboot and plug it in
At this point all should be ready and gucci, just hit start and the process will take care of the rest, once your phone reboots you will have stock unrooted firmware. You'll get an ota, accept it, reboot, you'll get the latest OTA, accept it. Then, if you want, you can reroot your phone and have some real fun again.
Hope that helps you, if not, try houseofmoto which i am unfamiliar with cause i use RSDLite all the time. (yeah i've used it alot cause i play around with my phone and i am not scared to experiment and honestly sometimes i feel after removing and editing a bunch of files it's best to restore to stock to get a fully stable and solid rom working.)
Fixed with HouseofMoto
ahjee said:
if RSD Lite fails...it could......
Click to expand...
Click to collapse
Fixed it with HouseofMoto, definitely worthwhile to have not returned it the day I got my replacement, now I can gladly send it, even though its working now :silly:
Nickrick2641 said:
Fixed it with HouseofMoto, definitely worthwhile to have not returned it the day I got my replacement, now I can gladly send it, even though its working now :silly:
Click to expand...
Click to collapse
glad its working...
Everything is screwed for me. I can't even RSD back to stock. I can access TWRP, but can't wipe System or Data. Fastboot is just there and won't actually push anything. I already have a Moto X now, and I was talking about this issue about a week ago on the Android Development subcat, but I thought I would give it one last go on here to see if I can at least make it a backup.
kungpowchicken said:
Everything is screwed for me. I can't even RSD back to stock. I can access TWRP, but can't wipe System or Data. Fastboot is just there and won't actually push anything. I already have a Moto X now, and I was talking about this issue about a week ago on the Android Development subcat, but I thought I would give it one last go on here to see if I can at least make it a backup.
Click to expand...
Click to collapse
Maybe if you could give some more detail about what exactly you can and can't get the phone to do, what screens can be accessed, and what you did that lead to this condition, we could offer some advice.
Also, no offence to the devs, but twrp is the devil lol. Most issues I have had in the past have led back to it in one way or another, so I never use it. (Just my opinion)
Tappin G2 Style
I can get to the Fastboot screen, I can access TWRP, and I can get the phone to bootloop at the boot animation screen.
I can't push anything through ADB or Fastboot, I cannot mount data or system in TWRP or otherwise. RSD comes back failed every time with every single stock build I use.
Literally two weeks ago, I was in bed, watching TV, with the phone charging. I unlock it to see if I had any notifications, and it kept saying that Nova launcher FC'd. So logically, I rebooted my phone and that's when it started boot looping.
I did nothing to the phone for a couple of hours, it was on the official CM 10.2 11/9 build. I had that ROM running fine for at least 24 hours before it went FUBAR.
kungpowchicken said:
Everything is screwed for me. I can't even RSD back to stock. I can access TWRP, but can't wipe System or Data. Fastboot is just there and won't actually push anything. I already have a Moto X now, and I was talking about this issue about a week ago on the Android Development subcat, but I thought I would give it one last go on here to see if I can at least make it a backup.
Click to expand...
Click to collapse
Is it this problem?: http://forum.xda-developers.com/showpost.php?p=47558893&postcount=47
If so use this solution: http://forum.xda-developers.com/showpost.php?p=47716278&postcount=57
scoobaspeaz said:
Is it this problem?: http://forum.xda-developers.com/showpost.php?p=47558893&postcount=47
If so use this solution: http://forum.xda-developers.com/showpost.php?p=47716278&postcount=57
Click to expand...
Click to collapse
Nope, my status us unlocked: 3. But when I get home, I'll try the mfastboot instead if fastboot.
kungpowchicken said:
I can get to the Fastboot screen, I can access TWRP, and I can get the phone to bootloop at the boot animation screen.
I can't push anything through ADB or Fastboot, I cannot mount data or system in TWRP or otherwise. RSD comes back failed every time with every single stock build I use.
Literally two weeks ago, I was in bed, watching TV, with the phone charging. I unlock it to see if I had any notifications, and it kept saying that Nova launcher FC'd. So logically, I rebooted my phone and that's when it started boot looping.
I did nothing to the phone for a couple of hours, it was on the official CM 10.2 11/9 build. I had that ROM running fine for at least 24 hours before it went FUBAR.
Click to expand...
Click to collapse
i made a modified utility to fix the partition error but need someone to test it please. it should do the process previously suggested automatically through the script.
http://www.mediafire.com/download/987490ykl14j4t8/DROID_RAZR_HD_Utility_1.3.gpt_fix.rar
thanks
bweN diorD said:
i made a modified utility to fix the partition error but need someone to test it please. it should do the process previously suggested automatically through the script.
http://www.mediafire.com/download/987490ykl14j4t8/DROID_RAZR_HD_Utility_1.3.gpt_fix.rar
thanks
Click to expand...
Click to collapse
Testing now.
UPDATE: Still no go.
kungpowchicken said:
Testing now.
UPDATE: Still no go.
Click to expand...
Click to collapse
Well that sux.
Your problem is different than what I made this for but I was hoping it would work for you.
What did it do, fail all the way through?
When I tested it on my phone it reported flashing the partitions ok. There was actually extra text displayed while it was doing it that I didn't put into the script, that's how I knew it was working.
Tappin G2 Style
Failed all the way.
kungpowchicken said:
Failed all the way.
Click to expand...
Click to collapse
im running out of suggestions
if you havent tried to put stock recovery back on yet, how about we try that and see what happens.
if you dont know how to do it through adb, just grab the 1.34 utility from the dev forum, it will push it through fastboot.
something is obviously wrong with twrp, maybe we can fix that first.
I tried flashing even the stock Recovery manually and through the 1.34 utility. Always comes up failed. :sad:
Did you try the manual steps that I posted in my links?
i hope that works, but im doubtful.
the utility essentially flashes exactly as you would manually.
he doesnt have a partition issue, im guessing something is wack with the permissions.
if twrp somehow screwed up the permissions to read only, i believe even the partition file cant overwrite it. i could be wrong.
So I think it has something to do with the Permissions of one or more of the partitions. I just noticed it keeps saying Permissions Denied when I try to fastboot or mfastboot.
kungpowchicken said:
So I think it has something to do with the Permissions of one or more of the partitions. I just noticed it keeps saying Permissions Denied when I try to fastboot or mfastboot.
Click to expand...
Click to collapse
Are you sure you have the snapdragon fastboot? Can't hurt to reinstall it.
Sent from my MB886 using Tapatalk
Also have you tried flashing it manually? (fastboot flash system system.img, etc.)
penser said:
Are you sure you have the snapdragon fastboot? Can't hurt to reinstall it.
Sent from my MB886 using Tapatalk
Also have you tried flashing it manually? (fastboot flash system system.img, etc.)
Click to expand...
Click to collapse
he defiantly has the right fastboot, its in the utility that has been downloaded thousands of times.
if its write protected some how, its not going to flash no matter how you try it.
what i was wondering is if recovery can fix permissions that deep, not sure he said he tried that.
What do you mean with recovery?
kungpowchicken said:
What do you mean with recovery?
Click to expand...
Click to collapse
go into twrp, advanced (i think thats the right section) and look for a line that says "fix permissions" and do it.
Keeps saying it can't mount anything.
kungpowchicken said:
Keeps saying it can't mount anything.
Click to expand...
Click to collapse
thats what i figured would happen
Please forgive me for having to ask what I'm sure sounds like a stupid question, but I have no idea how to accept the OTA update Verizon is attempting to send me to version 4.4.4 on my HTC One M8 now that I have used Sunshine to attain S-Off and have TWRP and SuperSU installed.
I have used ADB, but am not very familiar with it at all.
I saw threads talking about flashing ROMS, but for the most part it really seems like Greek to me.
I had only gone down the Sunshine road because I wanted root access mainly for one app--Lightflow. In retrospect I'm feeling like I opened a can of worms. But the can is open, and the worms are out there, so now I need to learn how to handle them.
I know I am supposed to keep S-off, no matter what I do. I think perhaps I'm supposed to revert back somehow to a "stock" bootloader (instead of TWRP--is that right?) but I don't have any idea how to do that (though I expect ADB is involved), and I also don't know what effect that would have on SuperSu, as I vaguely recall TWRP may have been required for SuperSU to work.
I'm really lost.
Any help, in very easy to understand terms (pretend you're trying to explain this to your grandmother) would be appreciated.
Thanks!
Andyw2100 said:
Please forgive me for having to ask what I'm sure sounds like a stupid question, but I have no idea how to accept the OTA update Verizon is attempting to send me to version 4.4.4 on my HTC One M8 now that I have used Sunshine to attain S-Off and have TWRP and SuperSU installed.
I have used ADB, but am not very familiar with it at all.
I saw threads talking about flashing ROMS, but for the most part it really seems like Greek to me.
I had only gone down the Sunshine road because I wanted root access mainly for one app--Lightflow. In retrospect I'm feeling like I opened a can of worms. But the can is open, and the worms are out there, so now I need to learn how to handle them.
I know I am supposed to keep S-off, no matter what I do. I think perhaps I'm supposed to revert back somehow to a "stock" bootloader (instead of TWRP--is that right?) but I don't have any idea how to do that (though I expect ADB is involved), and I also don't know what effect that would have on SuperSu, as I vaguely recall TWRP may have been required for SuperSU to work.
I'm really lost.
Any help, in very easy to understand terms (pretend you're trying to explain this to your grandmother) would be appreciated.
Thanks!
Click to expand...
Click to collapse
Taking the OTA is simple, you'll need your stock 4.4.3 recovery installed not TWRP. If you try to take it as you are right now it will fail everytime because of TWRP. I'm going to assume you haven't modified your stock ROM in anyway so accept the OTA and let it install. You will not lose S-OFF so rooting is simple. Reinstall TWRP and flash the latest SuperSU zip file.
The Stig 04 said:
Taking the OTA is simple, you'll need your stock 4.4.3 recovery installed not TWRP. If you try to take it as you are right now it will fail everytime because of TWRP. I'm going to assume you haven't modified your stock ROM in anyway so accept the OTA and let it install. You will not lose S-OFF so rooting is simple. Reinstall TWRP and flash the latest SuperSU zip file.
Click to expand...
Click to collapse
Thanks for the response.
So the question is how do I go back to my stock recovery instead of TWRP?
And then after taking the update, what do I need to do to reinstall TWRP and then flash the latest SuperSU.zip file?
I realize I should know this stuff, but I had help from the Sunshine folks last time, so I really don't remember everything that went on, or exactly what I did vs. what they did, etc.
Thanks again!
Andyw2100 said:
Thanks for the response.
So the question is how do I go back to my stock recovery instead of TWRP?
And then after taking the update, what do I need to do to reinstall TWRP and then flash the latest SuperSU.zip file?
I realize I should know this stuff, but I had help from the Sunshine folks last time, so I really don't remember everything that went on, or exactly what I did vs. what they did, etc.
Thanks again!
Click to expand...
Click to collapse
You don't need to do any of that.
Download the exe from this thread: http://forum.xda-developers.com/showthread.php?p=56211035
run it and you will be on stock 4.4.4.
To get TWRP back you have to flash it fastboot (lots of tutorials all over the forum for that) and with the recovery installed you can just flash SuperSU in recovery to gain root again.
The Stig 04 said:
Taking the OTA is simple, you'll need your stock 4.4.3 recovery installed not TWRP. If you try to take it as you are right now it will fail everytime because of TWRP. I'm going to assume you haven't modified your stock ROM in anyway so accept the OTA and let it install. You will not lose S-OFF so rooting is simple. Reinstall TWRP and flash the latest SuperSU zip file.
Click to expand...
Click to collapse
berndblb said:
You don't need to do any of that.
Download the exe from this thread: http://forum.xda-developers.com/showthread.php?p=56211035
run it and you will be on stock 4.4.4.
To get TWRP back you have to flash it fastboot (lots of tutorials all over the forum for that) and with the recovery installed you can just flash SuperSU in recovery to gain root again.
Click to expand...
Click to collapse
Thanks. That thread says that using that .exe is going to wipe my phone, which would then mean I need to restore it from a backup. I think I'd really just rather take the OTA update to 4.4.4, since in the future I'm going to want to take other OTA updates as well. So if I can learn how to return to my stock recovery now, and the rest of it for this OTA update, I should be good to go for future OTA updates.
Thanks, though.
So my questions above remain about how to revert to the stock recovery, and then how to reinstall TWRP and SuperSU.
Thanks!
Andyw2100 said:
Thanks. That thread says that using that .exe is going to wipe my phone, which would then mean I need to restore it from a backup. I think I'd really just rather take the OTA update to 4.4.4, since in the future I'm going to want to take other OTA updates as well. So if I can learn how to return to my stock recovery now, and the rest of it for this OTA update, I should be good to go for future OTA updates.
Thanks, though.
So my questions above remain about how to revert to the stock recovery, and then how to reinstall TWRP and SuperSU.
Thanks!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2723159
Download the file "Stock Recovery 4.4.3" from the thread above. Flash that using ADB, once you take the OTA and are on 4.4.4 Flash TWRP using ADB again.
http://forum.xda-developers.com/showthread.php?t=1538053
Download SuperSu from the thread above and place that in your SD Card. Boot into recovery and install it. Though you should already have this on your computer or SD Card.
Edit: I believe there is an even easier way, just have never done it/tried it so I don't wanna lie and act like I know what to do.
The Stig 04 said:
http://forum.xda-developers.com/showthread.php?t=2723159
Download the file "Stock Recovery 4.4.3" from the thread above. Flash that using ADB, once you take the OTA and are on 4.4.4 Flash TWRP using ADB again.
http://forum.xda-developers.com/showthread.php?t=1538053
Download SuperSu from the thread above and place that in your SD Card. Boot into recovery and install it.
Click to expand...
Click to collapse
You have to flash the stock recovery in fastboot - not ADB. And you gotta make sure all the bloatware that comes with the original stock rom is in place or the OTA will fail (it does a "system integrity check" prior to applying the OTA). That can be a headache if you do not have a backup of apps you may have removed...
Each future update will be available within days of release here on XDA, either as a standalone firmware update or stock rooted rom or both. I would not take OTAs - ever.
Develop a solid backup routine and restoring your device is a 20 minute exercise...
Thanks to both of you.
I don't believe I removed any bloatware, so I think the OTA update should work.
How do I flash the stock recovery in fastboot?
Again, many thanks!
I just checked my ADB folder, and see a fastboot.exe there, so I imagine it's just a command like ADB. I'll give this a shot later. Again, many thanks to both of you for the assistance. I will post again with, hopefully, my good results, or with additional questions.
Thanks!
berndblb said:
You have to flash the stock recovery in fastboot - not ADB. And you gotta make sure all the bloatware that comes with the original stock rom is in place or the OTA will fail (it does a "system integrity check" prior to applying the OTA). That can be a headache if you do not have a backup of apps you may have removed...
Each future update will be available within days of release here on XDA, either as a standalone firmware update or stock rooted rom or both. I would not take OTAs - ever.
Develop a solid backup routine and restoring your device is a 20 minute exercise...
Click to expand...
Click to collapse
Sorry I thought fastboot and ADB was kinda that same thing seeing as it was refereed to as "fastboot/adb directory"? If not my bad! Also this is the method I always use to take OTA's and have never ever had a problem.
Andyw2100 said:
I just checked my ADB folder, and see a fastboot.exe there, so I imagine it's just a command like ADB. I'll give this a shot later. Again, many thanks to both of you for the assistance. I will post again with, hopefully, my good results, or with additional questions.
Thanks!
Click to expand...
Click to collapse
Put the recovery image into the same folder with your fastboot.exe
Open a command prompt from that folder (shift + right click > open cmd window here)
check connection with
Code:
fastboot devices
if successful
Code:
fastboot flash recovery <name of recovery>.img
Would you need to remove root before taking the OTA? Just curious.
Sent from my GT-N5110 using xda app-developers app
mumbles202 said:
Would you need to remove root before taking the OTA? Just curious.
Sent from my GT-N5110 using xda app-developers app
Click to expand...
Click to collapse
No. You will lose root after the ota so it doesn't matter but you can always get it back as long as you are S-OFF by flashing a custom recovery like TWRP and then flashing SuperSu.
Well, I have run into a snag right off the bat.
While the command "ADB Devices" sees the phone, "Fastboot Devices" does not.
Any ideas as to how to rectify this?
Thanks!
I did some googling, and this problem I solved on my own.
I had to use adb to get into fastboot USB mode or something with adb reboot bootloader, and then fastboot devices worked.
I'm now continuing on.
Well, so much for this being easy.
I believe I successfully flashed my stock recovery.
But apparently I no longer have the OTA update ready to install, as at some point I tried to run it again just to get TWRP up, and now it's not showing as available. And when I try to check for updates in Settings/Software update/Check new I get an error message that says Download Unsuccessful. We were not able to download this update.
For now I guess I'll wait and see if Verizon tries to send me the update again, or if it works if I check for it myself some other time. (Or if anyone here has any suggestions.)
Also, I still seem to have root access. I thought that I wouldn't, since I believe I have replaced TWRP with the stock recovery.
I'm also now getting a constant error message about Google Play Services having stopped. And my wi-fi doesn't seem to be connecting properly.
I'm really wondering just what the heck I've done.
Well, for anyone still following my saga...
Things are somewhat better, but not totally resolved.
I kept checking, and eventually I was able to download the OTA update to 4.4.4. I did, I updated, and all went smoothly. I then was able to flash TWRP and then install Super SU and I have root access again. So on that front, all is well.
The problems that remain, though, are that I still am having issues with Google Play Services quitting and my Wi Fi not connecting. Could these things be related somehow? I've tried clearing the cache and then actually all data from Google Play services, but that has not helped. I have deleted my networks, and then tried reconnecting to them, but that also has not helped. It shows my networks in range as "saved" or "disabled" but won't connect to any of them.
Any ideas for me?
Thanks.
And thanks for the help in getting the 4.4.4 OTA update. At least that worked!
I realize I am basically having a conversation with myself at this point, but just to wrap things up, in case anyone does come along and read any of this...
I have solved all my issues.
The Google Play Services issue must have been related to the Wi-Fi not connecting, and the Wi-Fi not connecting was due to my main network actually having an issue and the fact that I had never authorized the phone on the other networks. I guess this is what happens after being up almost 24 hours. At least I think everything is OK now.
Again, thanks to those that helped!
Andyw2100 said:
I realize I am basically having a conversation with myself at this point, but just to wrap things up, in case anyone does come along and read any of this...
I have solved all my issues.
The Google Play Services issue must have been related to the Wi-Fi not connecting, and the Wi-Fi not connecting was due to my main network actually having an issue and the fact that I had never authorized the phone on the other networks. I guess this is what happens after being up almost 24 hours. At least I think everything is OK now.
Again, thanks to those that helped!
Click to expand...
Click to collapse
Not sure why I stopped receiving notifications from your thread. But at least you got your phone in working order! lol
For those of you that are rooted and would like to return back to stock with a relocked bootloader follow the steps.
This could also be useful for those of you stuck with a non bootable device. It will make your device eligible for warranty replacement again.
1. Flash stock boot.img (link) with the following command:
Code:
Fastboot Flash boot Stock_Boot.img
2.Re-lock bootloader with
Code:
Fastboot flashing lock
3. Enter recovery with Vol+ and USB plugged in. Then go down to wipe and Factory restore. Reboot and DONE
Hope this tip is useful to some.
See yah
Stock Boot.img Link
https://drive.google.com/open?id=1SqjkwVzNC3nAqDkNDMdEpqQH7viXDmb4
Is this the stock boot image for the regular non-carrier Razer Phone?
Kalveitt said:
Is this the stock boot image for the regular non-carrier Razer Phone?
Click to expand...
Click to collapse
This is for Non-Carrier.
Confirmed , you just made my day sir . i resurrect my device i flashed how you said with that command but i need to add -i 0x1532 , i got a message that is gonna flash it on b partition ,he said is done , after i restart it i got a message on phone (erasing) after i done the steps to factory reset it , i managed to get in the stock recovery, after 10 minutes i booted in the software all fine but not the wifi and flashlight ,
thank you once again for your hard work.
we keep in touch maybe i can do the wifi and flashlight
my device
Razer three uk
Anyone flash back to stock and have issues installing the latest update? Downloads but won't install?
So I relocked the bootloader before this file was released, by mistake my phone has twrp on both partitions, so when ever I boot it just says device corrupt and reboot I can however access qualcom diagnostics by pressing volume up + volume down at the same time, just wondering if phone can be restored through that interface
Btw as I'm finding out.. This doesn't reset to stock! It does relock your phone and you loose root, but any changes made to the system files while you were rooted sticks.. Ie hosts file changes. I'm back to "stock" and the adaway hosts file changes are still present.. I expect other changes are still there too and that's why I can't flash the update. guess I'm waiting for factory images for a full stock as well)
mikeandjaimie said:
Btw as I'm finding out.. This doesn't reset to stock! It does relock your phone and you loose root, but any changes made to the system files while you were rooted sticks.. Ie hosts file changes. I'm back to "stock" and the adaway hosts file changes are still present.. I expect other changes are still there too and that's why I can't flash the update. guess I'm waiting for factory images for a full stock as well)
Click to expand...
Click to collapse
Hopefully they get released at all at this point...sure looking less and less likely at this juncture with incremental push updates coming from Razer.
mikeandjaimie said:
Btw as I'm finding out.. This doesn't reset to stock! It does relock your phone and you loose root, but any changes made to the system files while you were rooted sticks.. Ie hosts file changes. I'm back to "stock" and the adaway hosts file changes are still present.. I expect other changes are still there too and that's why I can't flash the update. guess I'm waiting for factory images for a full stock as well)
Click to expand...
Click to collapse
Or if someone with a US/NA Razer Phone was nice enough to upload and post there TWRP backups before the the partitions were modified. We have a backup for the 3UK people, but one from US/NA Razer Phone, and one from the EU/Non Carrier Razer would help alot of people. I know people have them, just no one willing to share I guess Will probably be months if Razer ever actually posts the Factory Images.
There have been files for both uploaded and it was determined you couldn't use them for 3 phones already.. That's how alot of people got non working phones that just say corrupted now..
Gotta wait till factory images are released if you are on 3.
mikeandjaimie said:
Btw as I'm finding out.. This doesn't reset to stock! It does relock your phone and you loose root, but any changes made to the system files while you were rooted sticks.. Ie hosts file changes. I'm back to "stock" and the adaway hosts file changes are still present.. I expect other changes are still there too and that's why I can't flash the update. guess I'm waiting for factory images for a full stock as well)
Click to expand...
Click to collapse
I manage to find the location of the ota Update.zip and tried flashing it in the stock recovery but it also fails on stage 2.
As you pointed it out. The update is failing because it's still recognizing the system as modified.
I'll leave my link up to help those who are stuck on a boot loop with an unlocked bootloader this will at least make them eligible for warranty replacement so it's something... Follow the steps and then send it off to Razer for warranty replacement. It's a shame really to send out a phone that could easily be fixed with system images. Razer has really dropped the ball. Not having system images from day one really hurt the enthusiast development for this device. If your not able to send it out for warranty replacement then all you can really do is wait for Razer to release the images and I think they may not release them until they release Oreo.
I followed the step-by-step for putting twrp on mine. All seems to go well but it just keeps booting back into bootloader. If I turn it off and hold the vol+ while plugging in the USB I just get the Razer logo and nothing. When I finally gave up I flashed the stock boot in the OP. I'm up and running now but no BT and the latest update just fails. Relocked the BL and no system changes were made since TWRP never seems to have installed, if though I got a successful when complete. I hate to send this back, anyone know if they can reflash it remotely? I'll pay the fee, just need the phone working on WiFi again.
Does this method also work if am rooted, running a stock 8.1 rom and kernal?
Solved Flash Razer Phone To Stock and gain OTA capable!!
This is for the Razer Phone!!!! Fixed Warranty and OTA Update!! As if freshly purchased!!!!
I figured out that unless you use the Razer provided images from their support site your phone will not function properly as any other procedure will be extremely time consuming on a command prompt!!! Imagine individually flashing all components in their respective orders and flashing to both partitions is a requirement so use the provide images and the flashall.sh command included in the downloaded file.
The instructions for gaining the ability to flash the update via windows cmd.
follow the original instructions from the razer support site and the do this for the connection or what it's actually called (Environment variables) you will need to navigate on your pc to the system properties window the click on environment variables, two panes in the window at the lower pane look for the PATH line which is the pathe for the variable to point cmd to file system where your stock razer update is located. If you followed all steps : usb drivers, androis sdk 28.xx or higher extracted to C:/adb folder, navigated to system window then update driver connect phone in bootloader mode then open update driver browse computer let me pick from a list of drivers on my computer and install the android bootloader interface continue even though it says not recomended it works.
now open your razer downloaded factory file and double click flashall.sh and wait till finished then stop the reboot and boot to booloader and open windows cmd and type fastboot devices then type fastboot flashing lock and lock it up, Done sorry for the unorganized text but I'm sure nobody cares as long as it works right? !#fi enjoy!!!
Solved!!!!!!!!!!!!!
---------- Post added at 06:41 AM ---------- Previous post was at 06:20 AM ----------
Mike02z said:
I followed the step-by-step for putting twrp on mine. All seems to go well but it just keeps booting back into bootloader. If I turn it off and hold the vol+ while plugging in the USB I just get the Razer logo and nothing. When I finally gave up I flashed the stock boot in the OP. I'm up and running now but no BT and the latest update just fails. Relocked the BL and no system changes were made since TWRP never seems to have installed, if though I got a successful when complete. I hate to send this back, anyone know if they can reflash it remotely? I'll pay the fee, just need the phone working on WiFi again.
Click to expand...
Click to collapse
I solved this and if you need detailed instructions or help anyone can ask and I will help and yes it does return it to brand new fresh ota and warranty is returned, everything works as it should no bugs wifi works and data on sim.
As for twrp you should flash it to one slot not both as you may know system is on both slots you could have two slots with twrp and no system lol I did that before!
Your phone can be stock but not ota with twrp fyi.
mikedeboefis said:
Solved!!!!!!!!!!!!!
---------- Post added at 06:41 AM ---------- Previous post was at 06:20 AM ----------
I solved this and if you need detailed instructions or help anyone can ask and I will help and yes it does return it to brand new fresh ota and warranty is returned, everything works as it should no bugs wifi works and data on sim.
As for twrp you should flash it to one slot not both as you may know system is on both slots you could have two slots with twrp and no system lol I did that before!
Your phone can be stock but not ota with twrp fyi.
Click to expand...
Click to collapse
Thanks, but I returned my Razer within the first 30 days. Just not for me.
mikedeboefis said:
This is for the Razer Phone!!!! Fixed Warranty and OTA Update!! As if freshly purchased!!!!
I figured out that unless you use the Razer provided images from their support site your phone will not function properly as any other procedure will be extremely time consuming on a command prompt!!! Imagine individually flashing all components in their respective orders and flashing to both partitions is a requirement so use the provide images and the flashall.sh command included in the downloaded file.
The instructions for gaining the ability to flash the update via windows cmd.
follow the original instructions from the razer support site and the do this for the connection or what it's actually called (Environment variables) you will need to navigate on your pc to the system properties window the click on environment variables, two panes in the window at the lower pane look for the PATH line which is the pathe for the variable to point cmd to file system where your stock razer update is located. If you followed all steps : usb drivers, androis sdk 28.xx or higher extracted to C:/adb folder, navigated to system window then update driver connect phone in bootloader mode then open update driver browse computer let me pick from a list of drivers on my computer and install the android bootloader interface continue even though it says not recomended it works.
now open your razer downloaded factory file and double click flashall.sh and wait till finished then stop the reboot and boot to booloader and open windows cmd and type fastboot devices then type fastboot flashing lock and lock it up, Done sorry for the unorganized text but I'm sure nobody cares as long as it works right? !#fi enjoy!!!
Click to expand...
Click to collapse
Yeah.. I need help on this one. I tried it and fastboot doesn't allow me to flash_all script.
How do you even double click flashall.sh?
I know this is kind of old but I'm currently having the same problem as a person above. I've tried using the flash_all command but it will only stay at "waiting for device" and doing flash_all.sh doesn't work.