Problem like in the title.
I had a 10.1 CM until recently, later 10.2 and everything acted (WiFi, bluetooth). Later I did SIM mod (everything acted), but I spoilt something in CWM (format everything in options advanceds) and from now on is out of order wifi, bluetooth and SIM on CM wont work. On the original 4.1.2 android everything is acting. What to do so that on the CM it is also ok?
LaPlagne said:
Problem like in the title.
I had a 10.1 CM until recently, later 10.2 and everything acted (WiFi, bluetooth). Later I did SIM mod (everything acted), but I spoilt something in CWM (format everything in options advanceds) and from now on is out of order wifi, bluetooth and SIM on CM wont work. On the original 4.1.2 android everything is acting. What to do so that on the CM it is also ok?
Click to expand...
Click to collapse
RSD Lite back to stock, reflash CM perhaps?
arrrghhh said:
RSD Lite back to stock, reflash CM perhaps?
Click to expand...
Click to collapse
The 10.1 cm and 10.2 I loaded a many times alternately with original 4.1.2 RSD, different of settings, I installed ROMs without/with the SIM card i slot etc.
It was sufficient to install all partitions after the CyanogenMod installation in CWM (modem etc. - were disconnected). At once everything became operative correctly.
But many thanks for any response in my problem.
Related
So I got bored of the whole ICS and JB revolution and decided to go for some good old fashioned Gingerbread love, so I went to the cyanogen site and downloaded CM 7.2, but since then my wifi isn't working but cellular data works, wifi just connects and stays put, doesn't work, even tried changing the regulatory channels but no luck, any idea? Please help
It's working fine for me on CM 7.2, so there's most likely an issue with your setup. Sometimes coming from ICS back to GB, requires a couple of wipes.
wmdunn said:
It's working fine for me on CM 7.2, so there's most likely an issue with your setup. Sometimes coming from ICS back to GB, requires a couple of wipes.
Click to expand...
Click to collapse
Wiped and Installed twice, still wont work.
Hi all,
My front facing phone speaker seems to be permanently muted. Whenever I get or make a phone call no sounds come from the speaker on the top front of the phone. When I switch to speaker mode everything works fine. Also the phone randomly disconnects from the phone network then reconnects. I was originally running Cyanogenmod 10.0.0 during which everything was working fine. I then upgraded to a nightly using the built in cyanogen upgrader. For a time after this everything continued to work. Eventually these problems began. I again upgraded, using the built in upgrader to 10.1.0 RC1 then 10.1.0 RC2 which didn't seem to change anything. Finally I used recovery to wipe the cache and factory reset and flash 10.1.0 RC2 and the latest gapps package. This didn't help either. I then repeated that process except with the version 10.0.0 of cyanogenmod which also did not fix the problem. I'm not sure if these problems are actually related but they seemed to start at around the same time. I've never knowingly flashed a radio on this thing, I'm not sure if the in app upgrader does this or not. I was wondering if anyone had a good idea on what my next course of action should be or if they have had similar issues and have found a solution.
Thanks.
Meshelton said:
Hi all,
My front facing phone speaker seems to be permanently muted. Whenever I get or make a phone call no sounds come from the speaker on the top front of the phone. When I switch to speaker mode everything works fine. Also the phone randomly disconnects from the phone network then reconnects. I was originally running Cyanogenmod 10.0.0 during which everything was working fine. I then upgraded to a nightly using the built in cyanogen upgrader. For a time after this everything continued to work. Eventually these problems began. I again upgraded, using the built in upgrader to 10.1.0 RC1 then 10.1.0 RC2 which didn't seem to change anything. Finally I used recovery to wipe the cache and factory reset and flash 10.1.0 RC2 and the latest gapps package. This didn't help either. I then repeated that process except with the version 10.0.0 of cyanogenmod which also did not fix the problem. I'm not sure if these problems are actually related but they seemed to start at around the same time. I've never knowingly flashed a radio on this thing, I'm not sure if the in app upgrader does this or not. I was wondering if anyone had a good idea on what my next course of action should be or if they have had similar issues and have found a solution.
Thanks.
Click to expand...
Click to collapse
If you were happy with everything working WHY in the world did you upgrade to a Nightly? Nightly by definition is only for people who know what they're doing and are not afraid of the Night.
Anyway, there are like 6.0221413e+23 changes from cm 10.0.0 to 10.1 RC2. What can I say you did a dirty flash (upgrade!), and probably didn't back up.
So the first thing you should do is back up. NOW (go to CMW recovery and back up)
Download a better behaving nightly like the one JD1639 uploaded. get it from http://forum.xda-developers.com/showthread.php?t=2272261
Download the UCMC1 radio (assuming you're on at&t)
Download the gapps 20130301
Put them all on in one folder for easy access
goto the CWM recovery and get to work:
1-backup
2-cleanup: go to mounts and format data, cache, system (don't format the sdcard!!!) and don't reboot until everything is finished
3-clean dalvik cache from advanced
4-install in this order: RADIO file.zip (UCMC1)
5-CM ROM
6-gapps
7-go to Advanced Restore option, find you back up and restore the "DATA" portion ONLY
This should save you ... good luck,
Commodore 64
Thanks for the reply.
That seemed to fix the connectivity issue but not the sound issue. I guess that could just be a hardware thing. If it were a software issue is there anything else I should try?
Meshelton said:
Thanks for the reply.
That seemed to fix the connectivity issue but not the sound issue. I guess that could just be a hardware thing. If it were a software issue is there anything else I should try?
Click to expand...
Click to collapse
You know I don't think it is a hardware issue since it started after one of your updates. If you were on a ROM for while, and one morning you wokeup and the sound didn't work ... maybe. But i'm not convinced since also I remember around Feb-March there were some complains on sound not working after flashing to 4.2.2 version of the cm. Try flashing back to the stock UCMC1 ROM (absolute stock flashed with Odin not CMW) and then do a factory reset.
So I'm new to rooting and flashing custom roms on android devices. This also shows that I'm new because I forgot to make a backup of my stock system before moving forward, hence this problem.
So I currently have CM 10.2 flashed on my phone and so far I can't get the wifi to work. My bluetooth works perfectly fine (I've read that if one fails usually the other should too), so I don't know what to do.
At this point I'm sure i'm stuck because I've flashed a few different roms already to see if i can fix it (10.0, 10.1, 10.2, and hacker's aosp 4.4) but the wifi isn't working in either so I stuck to the rom that had the fewest bugs.
What's weird was that it was working when I had 4.4 flashed, but when i found it too buggy and flashed CM 10.2, now it doesn't work.
Anyone else have this problem? I guess I can live with it for a while until maybe I purchase a new phone.
Thanks
di3zelherbert said:
So I'm new to rooting and flashing custom roms on android devices. This also shows that I'm new because I forgot to make a backup of my stock system before moving forward, hence this problem.
So I currently have CM 10.2 flashed on my phone and so far I can't get the wifi to work. My bluetooth works perfectly fine (I've read that if one fails usually the other should too), so I don't know what to do.
At this point I'm sure i'm stuck because I've flashed a few different roms already to see if i can fix it (10.0, 10.1, 10.2, and hacker's aosp 4.4) but the wifi isn't working in either so I stuck to the rom that had the fewest bugs.
What's weird was that it was working when I had 4.4 flashed, but when i found it too buggy and flashed CM 10.2, now it doesn't work.
Anyone else have this problem? I guess I can live with it for a while until maybe I purchase a new phone.
Thanks
Click to expand...
Click to collapse
Did you flash 10.2 directly over 4.4 without wiping system data and both caches?
Sent from my XT926 using Tapatalk
koftheworld said:
Did you flash 10.2 directly over 4.4 without wiping system data and both caches?
Sent from my XT926 using Tapatalk
Click to expand...
Click to collapse
The first time, no. I thought I may have installed 4.4 incorrectly so after installing 10.2 i tried flashing 4.4 again, but I did wipe the caches, system, data and dalvik caches the second time going back after reading in this forum how to flash over a custom rom. But then seeing that the bugs were still there, i wiped again and went back to 10.2 and I've been there for a day now.
Missed Wifi
I'm facing the same trouble , same conditions.
Solved
zirig said:
I'm facing the same trouble , same conditions.
Click to expand...
Click to collapse
This will solve !! http://forum.xda-developers.com/showthread.php?p=47415109&posted=1#post47415109
thanks for xXLuHXx
zirig said:
This will solve !! http://forum.xda-developers.com/showthread.php?p=47415109&posted=1#post47415109
thanks for xXLuHXx
Click to expand...
Click to collapse
That worked! Thank you!
Hi everybody,
I decided to go back to Cyanogenmod, because i had some issues with the ROM I used before. First I flashed the CM 10.1.3 stable, everything worked fine, but I couldn't connect to any WiFi. So i tried flashing the nightly 10.2 10.2 2013111 over the Updates in the preferences. Still, i couldn't connect to any WiFi. I tried it two more times with full wipes and flashing the nightly over my Recovery, but couldn't make it work.
All these times i flashed the boot.img after flashing the nightly. I don't really know what to do anymore and thought anyone might have an idea for me?!
I didn't have any major issues until today, so i don't know what Information you might need to help me, so please tell me if I should say something more about the system or how I flashed it etc.
Thanks in Advance!
Edit: Same Problem with CM11...
Edit 2: Tried to flash the Bubba Kernel, because i read something about it...now i can't even turn the wifi on. -.-
Hi,
i tried to flash cm 10.2 on my photon Q today.
I had the latest official rom working for half a year but i was missing some features i couldnt get with stock.
Anyway its a simcard modded unit i use in germany i was running stock jellybean (rooted, motochopper method) until today.
First i unlocked the boatloader, flashed latest open recovery and then flashed CM10.2 latest nightly (GSM) + gapps, after that i did a factory reset with open recovery.
After i configured the new firmware i noticed that i had no gsm, it didnt even ask for the pin of my locked card. I tried to switch from CDMA to GSM but with no effect. I also tried several reboots but i couldnt change the mobile network or get gsm to work.
I then tried to flash the latest cm snapshot but it doesnt work as well, the only difference is that the phone service always crashes when i try to change the network method.
Doesn anyone else have a idea? The thing is currently useless to me...
Thanks in advance.
Sonic-NKT said:
Hi,
i tried to flash cm 10.2 on my photon Q today.
I had the latest official rom working for half a year but i was missing some features i couldnt get with stock.
Anyway its a simcard modded unit i use in germany i was running stock jellybean (rooted, motochopper method) until today.
First i unlocked the boatloader, flashed latest open recovery and then flashed CM10.2 latest nightly (GSM) + gapps, after that i did a factory reset with open recovery.
After i configured the new firmware i noticed that i had no gsm, it didnt even ask for the pin of my locked card. I tried to switch from CDMA to GSM but with no effect. I also tried several reboots but i couldnt change the mobile network or get gsm to work.
I then tried to flash the latest cm snapshot but it doesnt work as well, the only difference is that the phone service always crashes when i try to change the network method.
Doesn anyone else have a idea? The thing is currently useless to me...
Thanks in advance.
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?p=47978878#post47978878
i looked at the build.prop and those options except:
ro.telephony.default_network=3
dont appear in the file...
Also this talks about GSM Data problem, i cant even do phonecalls/sms, its not even asking for my sim code..
I then tried to flash back to stock but now RSD Lite 6.1.5 wont show my device... (all drivers installed).
Im really getting frustrated.
EDIT:
ok tried another PC with Win7 (mine runs 8.1) and now RSD Lite seems to work
Update: Now back to stock... GSM Works fine after i activated it... i now try to reflash cm10.2 and see what happens
Ok its working now
everything out of the box...
i dont know what went wrong the first time cause i did exactly the same as far as i know...
Sonic-NKT said:
i looked at the build.prop and those options except:
ro.telephony.default_network=3
dont appear in the file...
Click to expand...
Click to collapse
Indeed this line was likely the relevant one
If missing just add it.