[Q] No Boot - No Root - No Debugging - Pattern Lock - Other Tools & General Discussion

Hi and Special Thanks for helping me , i have one FSL F788E - 7" Tablet - Chinese Tablet , and now Locked with pattern i try many ways such as adb without developer and Hold Power + Down Key , connect to pc and try from odin , RSD Lite and everything , but can't unlock because don't have boot ,
1. When Press Power + Deon key , go to blank screen and when connect to pc APX known and missed driver , search everywhere but i don't know chinese for solve
2. Developer option not enabled
3. No Google Account
4. No ROOT
5. when many times incorrect just wait 30 seconds and nothing to do , after 30 seconds try again (5 Times for locked 30 seconds and again)
now i don't know how fix this , many bad , very bad , anybody can help me?
Thanks

Related

i have problem You have tried 10 times , Wait for retry

You have tried 10 times , Wait for retry
& i am waiting for 48 hours . Phone is keep ON
But it not allow me to enter the code ..
spv c600
pls help me
Hey! Try this:
- Turn on the phone
- QUICKLY! Enter PIN and BEFORE the message "10 times etc" goes on, PRESS the power button and enter flight mode!
- message will show, restart
- Your phone will boot in flight mode, OK - now app-unlock it and remove simlock
- Ready!!! Your phone will be usable again

[Q] Hard Reset is not working?

Hello!
I try to hard reset my sister phone today using this methods:
- Pc Companion
- Vol up + power button
I even try flashtool and emmy to help me remove this lock screen (my sister changed it and now she don't remember...)
I also can not unlock bootloader with FlashTool.
When I press vol up + power button phone vibrate like this
- 1 time
- 3 time
- 1 time
and it loops like that. one vibration, then three, then one again. What's wrong with my phone? It is possible that phone is locked "harder" becouse she try so many times and fail? Around 150.. USB debug mode is turned off
Of course she don't remember his gmail account details (isn't it obvious) I don't know how to help her, any ideas?
Now, the only solution you have in this scenario is by using the repair option of Sony PC Companion or you can also use flashtool to flash your firmware again.

[Completed] Recovery only shows no command.

Hello.I have a Gigaset qv1030 with Nvidia Tegra 4 cpu.
The main idea is that i cannot enter the android due to not knowing the password.So i ''tried'' to went to recovery for a fresh wipe/factory reset.Problem is no key combination does start up recovery.
Power+volume up does only power up the tablet / Power volume down does nothing and freezes the tablet (need to hold power for it to resests).
Only thing that does work however is if i press Volume up and power , after first vibration pressing volume down (with all 3 button now pressed) goes me into bootloader (says Unlocked) , and have the following options continue , reboot , fastboot protocol , recovery kernel , power off.
Fastboot protocol only restarts the tablet at the same point back into the bootloader (useless i guess)
Recovery kernel brings up an green android sitting on it's back with a red triangle saying no command. (tried every combination found , nothing seems to work)
Adb debugging is not set up in the settings i guess , and fastboot does appear in device manager if connected to a PC but it just does not accept any drivers (neither the modified google_usb drivers with tegra enabled , neither some found on the internet trough drivescape).So no device is found by the PC .
Connecting it while on the password screen, PC does recognize the tablet but that's it . No adb recognition.
This is as far as i got , idk what to do . Please help?
# PS yes i did not own the tablet , i got scammed by someone , and hoped to do the best out of the situation.
i think it is android 4.2
Hello, and welcome to Assist,
I'm afraid we can't really help if you've lost/forgot your password. The password is there to protect the information that is contained in the file.
You'll have to create an account to post in the main forums if you have any other questions.
Good luck
Razvan

[Completed] fastboot does not accept command / recovery no command problem

Hello.I have a Gigaset qv1030 with Nvidia Tegra 4 cpu.
The main idea is that i cannot enter the android due to not knowing the password.So i ''tried'' to went to recovery for a fresh wipe/factory reset.Problem is no key combination does start up recovery.
Power+volume up does only power up the tablet / Power volume down does nothing and freezes the tablet (need to hold power for it to resests).
Only thing that does work however is if i press Volume up and power , after first vibration pressing volume down (with all 3 button now pressed) goes me into bootloader (says Unlocked) , and have the following options continue , reboot , fastboot protocol , recovery kernel , power off.
Fastboot protocol only restarts the tablet at the same point back into the bootloader (useless i guess)
Recovery kernel brings up an green android sitting on it's back with a red triangle saying no command. (tried every combination found , nothing seems to work)
Adb debugging is not set up in the settings i guess , and fastboot does appear in device manager if connected to a PC but it just does not accept any drivers (neither the modified google_usb drivers with tegra enabled , neither some found on the internet trough drivescape).So no device is found by the PC .
I did however finally installed the drivers using the drivescape driver with extracting driver , restarting with no driver signature and installing the driver using device manager update driver.Fastboot still does not see the tablet.
Connecting it while on the password screen, PC does recognize the tablet but that's it . No adb recognition.
This is as far as i got , idk what to do . Please help?
# PS yes i did not own the tablet , i got scammed by someone , and hoped to do the best out of the situation.
i think it is android 4.2
Duplicate, Please see my response from here:
http://forum.xda-developers.com/general/xda-assist/recovery-command-t3519232
Closed.

Question I need help to pass (orange state)

hi dears,,
After I unlock my device (s22 ultra 5G)
It stuck in this screen (orange state) then reboot
I tried all ways to pass this screen NO WAY , I do search but no way to solve it
When I press power+vol up , it take to black screen contain :
Select boot mode
VOLUME UP to select. VOLUME DOWN to OK
RECOVERY
FASTBOOT
NORMAL
if I select anyone of them, its reboot reboot ......
can anyone know how to fix this problem
No help yet ​
Still waittingb
can u send me screenshot (i dont have the phone, and im not gonna fix it, just curious)

Categories

Resources