Related
Hey all, so last night when I was trying to flash a new ROM onto my phone, I wanted to make sure I deleted everything off my previous ROM so I went into TWRP and basically went on a deleting frenzy. I wiped basically everything from system, os, to cache. Lets just say my thought process wasn't so smart. So now im stuck in hboot. I pmed Scrosler yesterday and he basically told me to RUU back. SO now for the last 5 hours I've been trying to look up how to do that. I downloaded a 1.85 Evita cingular RUU thingy, and tried using fastboot. Now I've run into another problem, my computer can't recognize my usb. Ive tried two different usb plugs of mine. I tried uninstalling HTC sync so that it could uninstall drivers and such, and then reinstall but to my avail that has not worked. So I can't even fastboot. So now I'm stuck and Ive looked on other peoples threads and such and can't figure this out. Yes I know I'm a noob. I SUCK. So if anyone could please help me out. Im rooted and unlocked bootloader. I get stuck in bootloop obviously because I dont have a OS. I can access Hboot and fastboot.
Thanks alot for anyone that could help me in this great time of need.
EDIT: I solved the problem. I just used my fathers computer which recognized my usb and RUU'd to 1.85 then unlocked bootloader etc. thanks for the help guys
Did you make sure you have the correct HTC drivers installed?
Sent from my HTC One X using xda premium
knifeparty said:
Did you make sure you have the correct HTC drivers installed?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Doesnt HTC sync manager already update/install the latest drivers for your phone automatically?
You should manually install the drivers and turn off HTC sync manager. That may be your problem. I would uninstall it.
Sent from my HTC One X using xda premium
knifeparty said:
You should manually install the drivers and turn off HTC sync manager. That may be your problem. I would uninstall it.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Ok, so I uninstalled HTC sync. I found a link to download ONLY the drivers.
Yep, getting same error still, USB device not recognized.
Try mounting the storage in TWRP, PC should recognize the 'removable disk' and you can put a zip onto it and flash the rom that way.
This way worked for me when I did the exact same thing. I thought I was screwed; now I'm running TN SE 2.2, highly recommended.
dandaman1219 said:
Try mounting the storage in TWRP, PC should recognize the 'removable disk' and you can put a zip onto it and flash the rom that way.
This way worked for me when I did the exact same thing. I thought I was screwed; now I'm running TN SE 2.2, highly recommended.
Click to expand...
Click to collapse
I tried doing this last time, but my PC isnt recognizing my device. It says USB device not recognized. This is the major issue I am plagued with otherwise I would do as you said.'''
EDIT: Ok so I was able to get it recognized on my dads laptop, he is running Windows Vista. So now when I go onto my computer and mount cache, (cant mount sd card through twrp because it says E:failed to mount /sdcard(invalid argument)AND UNABLE TO MOUNT SDCARDWHEN TRYING TO READ SETTINGS FILE) oops caps), it says I have to format it. I right clicked and tried to open as portable device and that works but I can't drag my ROM in there.
Someone can correct me if I'm wrong, but isn't this because the new HBoot is stopping the 1.85 RUU? Wouldn't you have to 2.2 RUU?
XNine said:
Someone can correct me if I'm wrong, but isn't this because the new HBoot is stopping the 1.85 RUU? Wouldn't you have to 2.2 RUU?
Click to expand...
Click to collapse
not sure but is this regarding to mounting through TWRP or what? and if someone could address my issue of the portable storage that would be appreciated
Zobabe said:
not sure but is this regarding to mounting through TWRP or what? and if someone could address my issue of the portable storage that would be appreciated
Click to expand...
Click to collapse
he is correct, you'll have to use the 2.20 ruu if you were on a 2.20+ rom. unfortunately you'll have to wait for a root method too :/
mcmb03 said:
he is correct, you'll have to use the 2.20 ruu if you were on a 2.20+ rom. unfortunately you'll have to wait for a root method too :/
Click to expand...
Click to collapse
Oh ok thanks . I downloaded ADB +fastboot onto dads laptop. I successfully relocked my bootloader, now I am in process of RUUing
hey since I RUUd with 1.85, do I need to root again or will I still have my root?
Zobabe said:
hey since I RUUd with 1.85, do I need to root again or will I still have my root?
Click to expand...
Click to collapse
ruu breaks root in short returns the phone to factory stock.
Sent from my Nocturnalized Beast
Zobabe said:
hey since I RUUd with 1.85, do I need to root again or will I still have my root?
Click to expand...
Click to collapse
But assuming you were unlocked before, getting it back is just a matter of flashing a custom recovery and superuser.
As the title says: I'm trying to install the 3.18 RUU for my AT&T HTC One X. I'm currently on an old build of CM10.1 (beautifully maintained by H8rift) and was wanting to try the latest build he posted with the 3.4 Kernel. I am S-Off and Unlocked. I searched the forum (internal search seems to be broken at the moment) and all I keep seeing is mostly go to fastboot THEN run the RUU. Well I'm in fastboot (enabled the menu from within CM...less I just misunderstood that completely). Fastboot shows "Fastboot USB" but the RUU still gives Error 170. What did I do wrong?
Running this on a Windows 8 x64 system, installed HTC Sync Manager (still didn't help). I updated the Android SDK Tools to the latest version. My CID is all 1's (as per the S-Off directions). I'm at a loss here hehe.
Ooh I have TWRP 2.4.1.0. And yes I barely post, just always looking, reading, etc.
Is the USB port you're using 2.0 or 3.0? If it's 3.0 (it should have the USB icon and a little ss) try switching to 2.0. Also, try running RUU while not in fastboot.
RollTribe said:
Is the USB port you're using 2.0 or 3.0? If it's 3.0 (it should have the USB icon and a little ss) try switching to 2.0. Also, try running RUU while not in fastboot.
Click to expand...
Click to collapse
Yup running it on my USB 2.0 ports. Tried my case ports and the motherboard ones, same thing. Also just tried it with the phone booted. No dice. Even using the HTC USB Cable (not like there should be a difference but hey, just in case). Maybe I should threaten the phone...with a hammer. (Nah I'm not that mean).
Turbo Mach 5 said:
Yup running it on my USB 2.0 ports. Tried my case ports and the motherboard ones, same thing. Also just tried it with the phone booted. No dice. Even using the HTC USB Cable (not like there should be a difference but hey, just in case). Maybe I should threaten the phone...with a hammer. (Nah I'm not that mean).
Click to expand...
Click to collapse
Is your phone showing up in adb?
Heh had to look it up but after doing it...no just says List of devices attached. Nothing else.
Turbo Mach 5 said:
Heh had to look it up but after doing it...no just says List of devices attached. Nothing else.
Click to expand...
Click to collapse
Hmm... is your USB debugging on? If yes, try reinstalling the driver.
Turbo Mach 5 said:
Heh had to look it up but after doing it...no just says List of devices attached. Nothing else.
Click to expand...
Click to collapse
It seems to me like a driver issue.
if while in fastboot mode fastboot devices does not show the device, The RUU will not work.
uninstall HTC driver and HTC sync and any other phone software (for samsung or whatever else)
Install latest HTC sync
make sure fastboot devices lists your device, then run the RUU
exad said:
It seems to me like a driver issue.
if while in fastboot mode fastboot devices does not show the device, The RUU will not work.
uninstall HTC driver and HTC sync and any other phone software (for samsung or whatever else)
Install latest HTC sync
make sure fastboot devices lists your device, then run the RUU
Click to expand...
Click to collapse
Roll, yah USB Debugging is on hehe. I even turned it off and back on. Exad: Ok. Uninstalling both HTC Sync and Samsung Kies (have to use that for my brother's Galaxy S2 Skyrocket). Uninstalling both now (might have to also run out of town so reply could be a little late).
Turbo Mach 5 said:
Roll, yah USB Debugging is on hehe. I even turned it off and back on. Exad: Ok. Uninstalling both HTC Sync and Samsung Kies (have to use that for my brother's Galaxy S2 Skyrocket). Uninstalling both now (might have to also run out of town so reply could be a little late).
Click to expand...
Click to collapse
Hey you said you were on Windows 8. You may have to manually install the driver to get it work, that's what I had to do. Or you could use the universal adb driver, but if you're gonna RUU, I'd be safe and use the HTC one.
RollTribe said:
Hey you said you were on Windows 8. You may have to manually install the driver to get it work, that's what I had to do. Or you could use the universal adb driver, but if you're gonna RUU, I'd be safe and use the HTC one.
Click to expand...
Click to collapse
Alrite after removing both managers (HTC and Samsung), reinstalling, and then having to turn off debugging then turn it back on...it now sees it
HT25CW****** device (first said offline but I looked at the phone and noticed it was asking for permission).
Time to continue flashing! I think what happened is I had the universal USB drivers but then had to install KIES for my bro so it replaced them. Then installing HTC on top of that made it give up. Thanks you two! I'll post if I have any other strange issues.
Turbo Mach 5 said:
Alrite after removing both managers (HTC and Samsung), reinstalling, and then having to turn off debugging then turn it back on...it now sees it
HT25CW****** device (first said offline but I looked at the phone and noticed it was asking for permission).
Time to continue flashing! I think what happened is I had the universal USB drivers but then had to install KIES for my bro so it replaced them. Then installing HTC on top of that made it give up. Thanks you two! I'll post if I have any other strange issues.
Click to expand...
Click to collapse
Annd now when I was all set to update to his latest one he posted, H8rift goes and begins posting nightlies and I don't have to downgrade touchpanel firmware! Hahaha (I had downgraded it and was about to install)! Still, thank you guys. I'm back in business!
Dear Turbo Mach 5,
Could you please provide the detailed steps you followed to RUU your ATT HTC One X.
I am also planning to update my ATT HTC One X with 3.18 RUU to use CM 10.2 based roms.
Please provide this information which will help me to start with my device.
1) Whether we need to re-lock the bootloader ? (I have SuperCID and S-Off)
2) After RUU ing whether we need to unclok the boot loader and root the device if we have SuperCID and S-off?
Thanks and Regards,
Sathish.
Turbo Mach 5 said:
Alrite after removing both managers (HTC and Samsung), reinstalling, and then having to turn off debugging then turn it back on...it now sees it
HT25CW****** device (first said offline but I looked at the phone and noticed it was asking for permission).
Time to continue flashing! I think what happened is I had the universal USB drivers but then had to install KIES for my bro so it replaced them. Then installing HTC on top of that made it give up. Thanks you two! I'll post if I have any other strange issues.
Click to expand...
Click to collapse
sathish804 said:
Dear Turbo Mach 5,
Could you please provide the detailed steps you followed to RUU your ATT HTC One X.
I am also planning to update my ATT HTC One X with 3.18 RUU to use CM 10.2 based roms.
Please provide this information which will help me to start with my device.
1) Whether we need to re-lock the bootloader ? (I have SuperCID and S-Off)
2) After RUU ing whether we need to unclok the boot loader and root the device if we have SuperCID and S-off?
Thanks and Regards,
Sathish.
Click to expand...
Click to collapse
You don't need to relock your bootloader to the run the RUU because you have s-off. And your s-off status and unlocked bootloader should survive the RUU process. All you need to do afterwards is flash TWRP recovery again, then you can flash a ROM. Please be aware that cm10.2 is still very alpha and multiple users have reported bricks from running it.
Sent from my Evita
Hi timmaaa,
Thank You very much for the clarification and update on cm 10.2 rom.
I was thinking with RUU my bootloader is going to re-lock even though I have S-off.
Thanks and Regards,
Sathish.
timmaaa said:
You don't need to relock your bootloader to the run the RUU because you have s-off. And your s-off status and unlocked bootloader should survive the RUU process. All you need to do afterwards is flash TWRP recovery again, then you can flash a ROM. Please be aware that cm10.2 is still very alpha and multiple users have reported bricks from running it.
Sent from my Evita
Click to expand...
Click to collapse
Hi,
I'm having trouble using the RUU as well. The problem seems to be getting the usb driver for my oneXL working. every time i plug it into my win7 pc, it goes through this installing drivers process but having clicked on "display details", the "android phone" component of the drivers says "failed". I've tried universal adb driver, and HTC usb driver with and without htc sync installed. the HTC sync manager keeps saying there is an update available for usb driver, even though I uninstalled the driver manager and htc sync.
Have not been able to get adb working, when i recently S_OFF my phone I had to use adb over wifi - but it worked.
Any help greatly appreciated, thanks!
Your post is a bit confusing as to which drivers you actually have installed. Download the latest HTC Sync Manager from the HTC One XL page at HTC.com, install it, connect your phone, drivers will install, uninstall HTC Sync Manager but leave drivers installed. Also, make sure you're using a usb 2.0 port and the HTC cable that came with the phone.
Sent from my Evita
thelloydr said:
Hi,
I'm having trouble using the RUU as well. The problem seems to be getting the usb driver for my oneXL working. every time i plug it into my win7 pc, it goes through this installing drivers process but having clicked on "display details", the "android phone" component of the drivers says "failed". I've tried universal adb driver, and HTC usb driver with and without htc sync installed. the HTC sync manager keeps saying there is an update available for usb driver, even though I uninstalled the driver manager and htc sync.
Have not been able to get adb working, when i recently S_OFF my phone I had to use adb over wifi - but it worked.
Any help greatly appreciated, thanks!
Click to expand...
Click to collapse
Scratch that...
Manually installed drivers and i got it working. Had to manual install twice, after one more error (171 this time), the RUU is applied. CM10.2 here i come!
htc vivid
Freinds My HTC vivid is like dead not able to turn on nor charging and not able to run ruu, its showing unrecognized malfunctioned, did uninstall and install of driver still nothing is happening please help.
biradar said:
Freinds My HTC vivid is like dead not able to turn on nor charging and not able to run ruu, its showing unrecognized malfunctioned, did uninstall and install of driver still nothing is happening please help.
Click to expand...
Click to collapse
You're in the wrong section, this is the HTC One XL section, you need to go here:
http://forum.xda-developers.com/htc-vivid
Just had the same issue trying to manually update my M9 to Nougat. Rebooted to download mode (Volume down & Power from off state) and it worked.
After getting the last week's CyanogenMod onto my at&t one x, my USB mass storage doesn't work. All that happens is I click "turn on mass storage" but it doesn't show up on the computer in a drive nor logging in usb storage.
My drivers are up to date. And I flashed a newer cm but it hasn't changed...
Please help
It's more likely to be your pc than your phone that's causing the issue. Also, sometimes it takes a minute for it to come up and lastly, if you want to be certain.
Make sure you're using twrp 2.3.3.1 or under or 2.6. All versions in between have issues wiping.
Check the md5 of your rom zip file to make sure there was no corruption.
Lastly make sure to do at least a factory reset though wiping system doesn't hurt either.
If you've done all that and you're still having issues try another usb cord and usb port.
Sent from my One X using xda app-developers app
Thanks so much. I'm waiting to get back home to see if this works. Should I reinstall HTC drivers?
Uninstall any HTC drivers and software and install the latest HTC sync just in case.
Sent from my One X using xda app-developers app
Nope. nothing is working. i think its time to figure out AirDroid...I wonder if its the 3.4 kernel issue though?
No or way more people would have the issue than just u.
Did you factory reset in bootloader at some point?
Sent from my One X using xda app-developers app
Yeah I did. Speaking of kernels, what are some compatable kernels for cm Evita?
pandasa123 said:
Yeah I did. Speaking of kernels, what are some compatable kernels for cm Evita?
Click to expand...
Click to collapse
you corrupted your sd card by doing so. you will need to reformat your sd card. as far as custom kernels the "search" function is your friend
I wouldn't trust any custom 3.4 kernels just yet if that's what you mean. It's still in beta and has weird issues so any modifications made could intensify instability and even cause permanent damage.
Sent from my One X using xda app-developers app
exad said:
I wouldn't trust any custom 3.4 kernels just yet if that's what you mean. It's still in beta and has weird issues so any modifications made could intensify instability and even cause permanent damage.
Click to expand...
Click to collapse
Yeah unfortunately is hard bricked due to my stupidity. Trying to put a kernel on my phone, the internal storage got delete
oh well. its time to hit up at&t to help me fix it (which they won't be able to) or replace it
pandasa123 said:
Yeah unfortunately is hard bricked due to my stupidity. Trying to put a kernel on my phone, the internal storage got delete
oh well. its time to hit up at&t to help me fix it (which they won't be able to) or replace it
Click to expand...
Click to collapse
hold your horses...your phone still turns on right ? so you should still able to get into recovery ?? if so you're far from a hard brick.
Crappyvate said:
hold your horses...your phone still turns on right ? so you should still able to get into recovery ?? if so you're far from a hard brick.
Click to expand...
Click to collapse
Nope...Unable to either...but lets suppose I was able to be in recovery, what would do I do if my entire storage is deleted? If it doesn't connect to the computer?
pandasa123 said:
Nope...Unable to either...but lets suppose I was able to be in recovery, what would do I do if my entire storage is deleted? If it doesn't connect to the computer?
Click to expand...
Click to collapse
When you say storage people assume you mean the SD card storage.
If your phone is just black screen but gets detected from your PC as QHSUSB_DLOAD then the emmc partition table might be wiped. The only way to know for sure is to try and enumerate your partitions as in the unbrick evita thread. If you don't get a bunch of partitions then the partition table is gone and only JTAGG or motherboard replacement will work.
Unbrick evita:
http://forum.xda-developers.com/showthread.php?t=1966850
exad said:
When you say storage people assume you mean the SD card storage.
If your phone is just black screen but gets detected from your PC as QHSUSB_DLOAD then the emmc partition table might be wiped. The only way to know for sure is to try and enumerate your partitions as in the unbrick evita thread. If you don't get a bunch of partitions then the partition table is gone and only JTAGG or motherboard replacement will work.
Unbrick evit:
http://forum.xda-developers.com/showthread.php?t=1966850
Click to expand...
Click to collapse
It doesn't get detected by PC at all. I tried adb device searching it thorough my terminal, but it just waits for device and doesn't charge either.
pandasa123 said:
It doesn't get detected by PC at all. I tried adb device searching it thorough my terminal, but it just waits for device and doesn't charge either.
Click to expand...
Click to collapse
I would try the unbrick evita thread if I were you just to see. If the PC doesn't detect it at all. It's likely a power issue or the board is physically dead. But that's rare.
exad said:
I would try the unbrick evita thread if I were you just to see. If the PC doesn't detect it at all. It's likely a power issue or the board is physically dead. But that's rare.
Click to expand...
Click to collapse
The battery is unfortunately dead so it won't power on at all. No worries though, since a replacement is arriving soon. I don't want to run into this again, so I'll take a read through it
I can confirm this issue, and I have CM10 (Android 4.1.2).
When I go to Settings > Storage > Menu: Computer connection, the Mass storage is checked, but if I want to change, the Settings will crash (Unfortunately, the Settings has been stopped.)
If you know any workaround, how to use that, please inform me!
Ps. What about the developer options? Couldn't the USB debugging cause this issue?
Try a newer build and completely delete and reinstall your HTC drivers. USB debugging wouldn't be a problem because that's only used for ADB instead of Mass storage
Edit: you know, the CM thread would be better next time, or even a new thread. We opened up a 4.5 month old thread.
Sent from my One X using Tapatalk
Yeah, it works, thank you... Windows sucks...
I've searched through the forums and I can't find a solution for this. After a long problem the first time I tried to root and flash a rom to my HTC One X, I had to re-lock the bootloader and flash a factory RUU. I decided to get back into it but I ran into a problem where whenever I get my phone fastboot mode, but my computer says there's an error with the device. When I try to execute fastboot commands, I'm stuck [Waiting for Device].
It's probably your drivers, make sure they're updated. Also make sure you're using a usb 2.0 port. You should also try different ports/cables.
Sent from my Evita
timmaaa said:
It's probably your drivers, make sure they're updated. Also make sure you're using a usb 2.0 port. You should also try different ports/cables.
Sent from my Evita
Click to expand...
Click to collapse
What drivers should I be updating and where should I get them. I've updated my google usb drivers using android sdk. And I'm using a usb 2.0 port, because it worked the last time I did the unlocking with this laptop.
You can get the htc drivers from the HTC Sync Manager download on the One XL page at HTC.com website.
Sent from my Evita
timmaaa said:
You can get the htc drivers from the HTC Sync Manager download on the One XL page at HTC.com website.
Sent from my Evita
Click to expand...
Click to collapse
I've read from many people, that having htc sync on your computer could mess this up. And I couldn't find the one XL page on htc.com
Thenerdy0ne said:
I've read from many people, that having htc sync on your computer could mess this up. And I couldn't find the one XL page on htc.com
Click to expand...
Click to collapse
It just took me ten seconds to find the One XL page. You install Sync Manager, connect your phone, it will install the drivers, then you uninstall Sync Manager but leave the drivers installed.
Sent from my Evita
timmaaa said:
It just took me ten seconds to find the One XL page. You install Sync Manager, connect your phone, it will install the drivers, then you uninstall Sync Manager but leave the drivers installed.
Sent from my Evita
Click to expand...
Click to collapse
Ok, well the drivers are installed and I'm still having this issue
timmaaa said:
It just took me ten seconds to find the One XL page. You install Sync Manager, connect your phone, it will install the drivers, then you uninstall Sync Manager but leave the drivers installed.
Sent from my Evita
Click to expand...
Click to collapse
Well, now I understand the issue. The problem is that I'm using windows 8.1 and the drivers are not yet compatible yet. Now I need a fix for that.
Hi there,i have a problem with my htc one x from at&t.The phone is working good but the problem was when i connect them to pc the windows 7 or xp or 8 not find any new device but the red light ( of charging) is on.I go to Settings -> Developer options and making with tick Usb debugging.I install htc sync manager same error again.I try to put in other pc they cant find for new driver but the charging is ok.I use andorid 4.1.1,Htc sense 4+, Software number 3.18.502.6 710RD , HTC SDK 4.63, Kernel 3.4.10-g310e8f1.This are my parameters of my htc one x from at&t.I have try to connect them from fastboot but the same problem it can not change them.. Please help me what i can do to repair them.
Are u s off....bottliader unlocked?
Sent from my One X using Tapatalk
marknoll said:
Are u s off....bottliader unlocked?
Sent from my One X using Tapatalk
Click to expand...
Click to collapse
No im S-On
Do you have any other phone software or drivers installed on the PC?
Sent from my Evita
timmaaa said:
Do you have any other phone software or drivers installed on the PC?
Sent from my Evita
Click to expand...
Click to collapse
No i have check them for this i have installed only last software of htc sync manager
You do have adb and fastboot installed, right?
Sent from my Evita
timmaaa said:
You do have adb and fastboot installed, right?
Sent from my Evita
Click to expand...
Click to collapse
yes i have installed theme i download and install all the sdk package
check this photo i have connect the phone with pc and i cant see any change ... I paste photo from fastboot and from normaly use.
Is that an original cable? It doesn't look like it to me.
Sent from my Evita
timmaaa said:
Is that an original cable? It doesn't look like it to me.
Sent from my Evita
Click to expand...
Click to collapse
i dont have original cable my last htc desire hd i charge with them its a universal cable.
Did that cable ever work for data transmission? Not all cables are created equal, I'd suggest trying another one, one that is known to have good data transmission capability.
Sent from my Evita
timmaaa said:
Did that cable ever work for data transmission? Not all cables are created equal, I'd suggest trying another one, one that is known to have good data transmission capability.
Sent from my Evita
Click to expand...
Click to collapse
YES YES this work for transmission i have another htc desire hd and its ok with this cable,i have another htc one is working with that
Ok, if you don't want to at least try with another cable you don't have to. It's possible that your phone's usb port itself is faulty. Are you using a usb 2.0 port on your PC?
Sent from my Evita
timmaaa said:
Ok, if you don't want to at least try with another cable you don't have to. It's possible that your phone's usb port itself is faulty. Are you using a usb 2.0 port on your PC?
Sent from my Evita
Click to expand...
Click to collapse
yes is 2.0 i try them to my laptop apple same error again.I will try them with other cable universal again i can not see any different
There might not be any difference, but isn't anything worth a try? I'm only trying to help you. It's standard procedure when having problems like this to try multiple cables, ports, and computers.
Sent from my Evita
timmaaa said:
There might not be any difference, but isn't anything worth a try? I'm only trying to help you. It's standard procedure when having problems like this to try multiple cables, ports, and computers.
Sent from my Evita
Click to expand...
Click to collapse
ok thank you so much for helping and replay me.But i have try alot of cable.i try with original htc cable and the same error is that a cricuit problem?
The phone working good,is in excellent condition.You know any people to help me or to send them in service if it need.Another thing is when i put to bootloader the status is not changing it can not find the phone i cant unlock bootloader too.I read alot of review and i havent find the helping
When the phone is booted into Android and you connect the cable do you get any prompt in the notification bar as to what mode you want to put it in? Or does it just start charging?
Sent from my Evita
timmaaa said:
When the phone is booted into Android and you connect the cable do you get any prompt in the notification bar as to what mode you want to put it in? Or does it just start charging?
Sent from my Evita
Click to expand...
Click to collapse
No prompt,only just charging
One last thing I can think of is to go into Settings/Power and disable Fast Boot, I'm not sure if it'll be there though, I can't remember if that was introduced on 4.1 or 4.2.2. Otherwise I think the usb port on the device might be faulty.
Sent from my Evita
timmaaa said:
One last thing I can think of is to go into Settings/Power and disable Fast Boot, I'm not sure if it'll be there though, I can't remember if that was introduced on 4.1 or 4.2.2. Otherwise I think the usb port on the device might be faulty.
Sent from my Evita
Click to expand...
Click to collapse
Ok i disable fast boot it, is 4.1.Hmm ok if the usb is fault why the phone is charging and can i repair them.