Database Info

[Q] List of Nexus 5 car chargers that charging in AC mode

Hi,
I would like to create list of car chargers that are able to charge N5 in AC mode.
Till now I have found only one review on Amazon on: "PowerGen Dual USB 3.1A Car charger".
Sorry, but I still can't post links.
I want to buy something that works for sure.
So, please share your real life experience...

armourer1 said:
Hi,
I would like to create list of car chargers that are able to charge N5 in AC mode.
Till now I have found only one review on Amazon on: "PowerGen Dual USB 3.1A Car charger".
Sorry, but I still can't post links.
I want to buy something that works for sure.
So, please share your real life experience...
Click to expand...
Click to collapse
I got this one http://www.amazon.co.uk/Anker-Dual-...5839252&sr=8-1&keywords=anker+usb+car+charger is working fine, it has 2 ports one of which says it is for apple but works just fine on any device both ports charge over 2 Amps.

Ady1976
Thanks for replay,
Can you please Goto Settings -> About -> Status -> Battery Status: and verify that you see Charging (AC) ?
I am also able to charge with old Griffin charger, but it only works with "Charging (USB)" - 0.5A.
Thanks...

armourer1 said:
Ady1976
Thanks for replay,
Can you please Goto Settings -> About -> Status -> Battery Status: and verify that you see Charging (AC) ?
I am also able to charge with old Griffin charger, but it only works with "Charging (USB)" - 0.5A.
Thanks...
Click to expand...
Click to collapse
Hi, yes it does say charging by (AC)

Ady1976
Thanks a lot !
Now I have one more charger to choose from -

0.5A is USB level so that's why that one doesn't work, anything that charges at 1A or over should be fine.

b1g1an said:
0.5A is USB level so that's why that one doesn't work, anything that charges at 1A or over should be fine.
Click to expand...
Click to collapse
My charger is capable of driving more than 0.5A, but the phone don't "understand' it.

Android determines that a charger is a wall charger (as opposed to a computer) by the fact that the data ports are shorted together. Apple chargers don't do this, so most chargers made for Apple products will only charge Android devices at 0.5A. Heck, almost no car chargers do, unless they were made specifically for an Android device. Here's what I did:
I ordered this Griffin car charger, mainly because of the size. It just BARELY sticks out of the car's charging plug. Then, I ordered the Nexus Wireless Charger, and used the cable it came with (minus the wall plug). Presto... Qi wireless charging in my car. The magnets hold the N5 in place nicely so it doesn't slide off the charger in my center console, and the charger I linked easily supplies the 1.8A that the Nexus Charger expects.
The catch is that this charger was designed for an Apple product, so I had to carefully pry it apart and short the center two USB pins with solder using a soldering iron (those are the data pins).
EDIT: I should point out here that the Nexus charger may work fine without shorting the pins. I didn't test it. I wanted the ability to quick charge via cable if necessary, since Qi charging is a bit slower, so I shorted the pins, but if all you're interested in is Qi charging, you may be able to get by without modifying the charger. If someone wants to test this, please let us know.

jt3
Thanks for the info. I have some kind of Griffin charger with 2 USB ports.
So, I will try to do the same - shorten data pins inside the charger.
I will post it works

Just an FYI, I was charging with a charger that listed AC mode last weekend yet it wasn't charging faster than the power was draining.
Not all the AC modes officially charge at a faster pace unfortunately. My Galaxy Nexus car dock charger though did charge it at a proper AC pace.

What took me a little while to figure out is that this issue may not be as related to the charger as it is to the cable. I tried 3 different car chargers and none of them would keep up with GPS battery drain in the car. I figured out that common to all 3 chargers that I was trying was the cable. So I bought this cable and now all 3 of the same chargers work great. I am finding that even at 1.0A you can keep up with the gps battery drain. At 1.5 amps or greater you can charge the battery in the car while using GPS full time.
http://www.amazon.com/gp/aw/d/B0088HTYUE/ref=ya_aw_oh_pit

jalanjkcarp said:
What took me a little while to figure out is that this issue may not be as related to the charger as it is to the cable. I tried 3 different car chargers and none of them would keep up with GPS battery drain in the car. I figured out that common to all 3 chargers that I was trying was the cable. So I bought this cable and now all 3 of the same chargers work great.
Click to expand...
Click to collapse
This is because some "charge only" cables don't have data pins at all (usually, because they came with a charging dock of some sort, or were designed for devices other than Android). Remember, I said earlier that Android notices that it's on a charger when the data pins are shorted. If they're missing completely, then it will only charge at 0.5A.
My rule of thumb is to stay far - far away from charge-only cables.

I bought a "2.1A Car Charger" with a single USB port (made by PNY....Amazon for about $6 shipped)... opened it up and soldered a bridge between the middle 2 USB pins.
Previously it reported Charging (USB), now I get Charging (AC). Confirmed with a widget that showed charging amps, the number went way way up.
Presumably any of these chargers claiming high-amp output will only work with iDevices, I guess they ignore the USB standard that if the two middle pins are bridged, its a power-only connection and full power can flow.
I did test this on an HTC One X running 4.2 and it reports Charging USB though, so there is a dependency on one of the newer Android kernels (my N5 runs 4.4.2)
Edit: oh yea... with my newly modded charger, I tested turning on Bluetooth streaming audio to my car, GPS on, navigation running, screen on, 100% bright, and wifi tethering enabled, and i STILL had a net charge going.

I've just bought a Blackberry Premium In-Vehicle Charger and my N5 recognizes it as an AC charger. The phone pulls around 1A from it (it's good for up to 1.8A). This is it, though I purchased mine from a local store.

USB charging on some amps, AC on others

As far as I know, if you plug in your Nexus5 (or any phone) into a power source with high amperage (>1A), your phone should utilize the amps it actually needs to charge at full speed (AC Charging).*
For example, if i plug my Nexus 5 into a 2.1A charger, it will charge just fine and draw only the required amps needed.*
Ive noticed my phone (rooted with faux) and my wifes (stock) and very finicky when it comes to the amps a charger uses. *It appears that if a charger is not exactly 1.0A or 1.2/1.3A, the phone charges as USB and not AC (no matter which USB cable I use). *Below is what I have found out, *with charge type/amp and how the phone sees it
Stock charger (1.2A) - AC
Anker 25W 5-Port Wall charger (1A Android port) - AC
Anker 25W 5-Port Wall charger (1A iPhone port) - USB (not sure why??)
Anker 25W 5-Port Wall charger (1.3A Galaxy Tab Port) - AC
Anker 25W 5-Port Wall charger (2.1A iPad ports) - USB
Anker E4 13000mah battery (2A) - USB
ANker E4 13000mah battery (1A) - AC
Anyone else experience this?
Sent from my Nexus 5 using Tapatalk

What you've observed here actually has nothing to do with the amperage of your ports and everything to do with how their data pins are wired. The N5 (and most other android devices) looks for the data +/- pins in the USB port to be shorted together, this is how it determines it's connected to a charger. Apple devices do this differently, they look for a specific combination of voltages to be present on the data +/- pins. When you connect your N5 to an Apple port, it ignores these voltages and just charges as if it were connected to a PC.
Now the fact that it sees the Galaxy Tab port as a charger is kind of interesting because the Tab uses yet another method for charger detection. It looks for resistors of a specific value connecting the data +/- pins to the power +/- pins. Cool that the N5 recognizes this configuration as well.
Anyway, this is why your Anker charger has ports dedicated to specific devices, each one is configured a little differently.

That would make sense, however, I would expect the same thing on my Nexus 4 but that doesn't happen. It charges as AC for every port
Sent from my Nexus 5 using Tapatalk

It could simply be that the N4 uses a different power control IC from the N5 (they almost certainly do). That and the software controlling the charging determine whether the phone enables AC charging from different ports or not.
I believe (I have not tried this) that some custom kernels have a setting that enables fast charging unconditionally, to draw as much current as the hardware allows.

Yeah I'm waiting for a kernel to support Fast charge, don't believe any do at the moment
Sent from my Nexus 5 using Tapatalk

the phone may revert to lower power usb charging if some condition isn't met... the phone is completely ignorant of the rated power of the wall wart. current is drawn, it depends on ohms.. so it has nothing to do with the "power output." what i mean is there is no situation where too many amps is going to trigger something in the phone, the phone controls the amps and is ignorant of the max the supply can give unless the phone actually exceeds that and detects a voltage drop, the supply can't force more amps without raising voltage to do so but that's just not how these devices work. so it's not because of the amps of the charger, it must be some other aspect.
what the phone can see is voltage. the state of the microusb "Id" pin (which will probably be open if you are using a data cable and not a specific dock to put it in desk mode or car mode, not that i think the n5 has those modes, but the Id pin is what tells the phone these things, as well as set them into download mode to flash them) and the state of the data pins. generally the data pins need to be shorted together to tell the phone to go into ac charging.
it's possible however that if the voltage is lower than 5v, the phone assumes there is voltage drop from too low a power rating on the supply and it's unable to supply the current. in this situation the phone may default to a lower current charging mode. some ac chargers may not go all the way to 5.0v they may put out as low as 4.45v... if the voltage is either low or unstable from the "high output" charger it may cause the phone to think it has exceeded the output rating of the supply when infact it's just getting unclean power. try it with an official tablet charger for a kindle or something and not a store bought anything..... some of the high output chargers just have substandard regulators and/or filtering.
there may also be more to this. usb 3.0 has a higher current rating than usb 2.0 if the phone can detect the type of port it's connected to, that may also determine the charge mode.. (in thoery anyway, no reason it can't work that way, but i can't say i know that it does on any current device)

It's getting pretty aggravating now that my Nexus 5 charges as USB when connected to my anker slim 2 1A external battery as well as my anker astro e4 1A port. No reason why it should do this
Sent from my Nexus 5 using Tapatalk

If you use a fast charging USB cable with the proper pins shorted you should get it to charge with in AC mode. I grabbed one from Amazon and it changed from DC to AC on the same charger.

jalanjkcarp said:
If you use a fast charging USB cable with the proper pins shorted you should get it to charge with in AC mode. I grabbed one from Amazon and it changed from DC to AC on the same charger.
Click to expand...
Click to collapse
Oh thanks for that tip. I'll order one on Amazon right now and update this thread
Sent from my Nexus 5 using Tapatalk

What happens if you connect an Apple device to one with the shorted pins?

Earth explodes
Sent from my Nexus 5 using Tapatalk

jalanjkcarp said:
If you use a fast charging USB cable with the proper pins shorted you should get it to charge with in AC mode. I grabbed one from Amazon and it changed from DC to AC on the same charger.
Click to expand...
Click to collapse
Tested the new USB cord on all ports, charges as AC. Thanks a lot
Sent from my Nexus 5 using Tapatalk

Charging Speeds

Hi,
Wanted your thoughts and opinions on charging speeds. I've never actually timed how long it takes to charge. i leave it overnight and it's ready when i wake up.
When i plug the phone into the charger, it flashes up slow charging for 2 seconds then disappears. which got me wondering how much it's actually using.
i used to use Current Widget app on my Samsung S3 which told me exactly how much current the phone was taking from the charger. typically it was 1A via AC/mains and 499mA from a PC. Plugged in to AC, I could play a power hungry game and it would still charge the phone at a good rate.
The LG kernel doesn't like these apps - the mA value is all over the place but it's typically <500mA displayed.
I could buy a USB ammeter to work out how much the USB charger is supplying but do you have any other methods of finding out? Do you know what your phone uses?
at home, i use a Xtrememac dual USB charger, 2x 2.1A output with a shielded 3M USB cable. for those wondering, it's the same regardless what cable i use. Have also tried with generic usb chargers, iPad chargers and official and OEM cables from LG and various other manufacturers. Have also used a data-shorted USB cable from PC which is the same result.
I haven't tried the LG charger yet (mainly as it's a 2 flat-pin plug and i don't know where i put the box) but i think i recall it being a 1.8A charger.

I use an application called "charger report" which can display current consumption and Xtar "USB detector" device. They both show the same numbers. But Xtar USB detector can detect voltage of a charger. The charging current of LG g pro 2 is 1.4-1.5A when the smartphone is not used and higher when I use it. Using USB detector I found out that this smartphone can charge with maximum current a charger can give only if the charger's voltage is 5.3v. So it chargers at full speed with original charger and two other chargers I have: a charger from my Lenovo s6000 (2A 5.4V) and from my Asus t100 (2A 5.3V).

i tried that app too and got the same results as with Current Widget.
i'll buy a "usb detector". thanks.

I forgot to mention that it take approximately two hours for charging indicator to reach 100% when the smartphone reports that it fully charged. And it's necessary to left it connected to a charger for ten to twenty minutes to be really fully charged. Otherwise charging indicator will soon drop to 90%. One can tell if a smartphone is still charging by touching a charger or by looking at current consumption: a charger would be warm and current would be higher than 200mA.

Is the GP2 Quick Charge (1 or 2) enabled? I can't read anything about it other than it's in Snapdragon chipsets. Not sure if it can be disabled or not.

ray-lee said:
Is the GP2 Quick Charge (1 or 2) enabled? I can't read anything about it other than it's in Snapdragon chipsets. Not sure if it can be disabled or not.
Click to expand...
Click to collapse
The Snapdragon 800,801 and 805 is for Quick Charge 2.0
The Snapdragon 600 for 1.0

ok, does anyone use a Quick Charger with their GP2? is it noticeably faster?

not yet available in Austria, I have read it kills the battery life on

ray-lee said:
Hi,
Wanted your thoughts and opinions on charging speeds. I've never actually timed how long it takes to charge. i leave it overnight and it's ready when i wake up.
When i plug the phone into the charger, it flashes up slow charging for 2 seconds then disappears. which got me wondering how much it's actually using.
i used to use Current Widget app on my Samsung S3 which told me exactly how much current the phone was taking from the charger. typically it was 1A via AC/mains and 499mA from a PC. Plugged in to AC, I could play a power hungry game and it would still charge the phone at a good rate.
The LG kernel doesn't like these apps - the mA value is all over the place but it's typically <500mA displayed.
I could buy a USB ammeter to work out how much the USB charger is supplying but do you have any other methods of finding out? Do you know what your phone uses?
at home, i use a Xtrememac dual USB charger, 2x 2.1A output with a shielded 3M USB cable. for those wondering, it's the same regardless what cable i use. Have also tried with generic usb chargers, iPad chargers and official and OEM cables from LG and various other manufacturers. Have also used a data-shorted USB cable from PC which is the same result.
I haven't tried the LG charger yet (mainly as it's a 2 flat-pin plug and i don't know where i put the box) but i think i recall it being a 1.8A charger.
Click to expand...
Click to collapse
Hey ray-lee!
I just bought this phone and as it seems it could get someday similar problems as my former phone the Galaxy Note 2.
That phone has had problems with charger and cable also. I had to buy another set of charger and cable since the original ones gave up a few months after i purchased the phone (it was used). The cable managed only 500mA wich is very slow for a battery that strong. One night was once not enough to charge my phone from 30% to 100%. As it seems it is problematic to manufacture cables, that can hold up and continually grant the 1,8 A that would charge our device in just 2 hours. I read somewhere that the G Pro 2 is one of 5 devices that has blazing fast speeds on charging the battery. If you handle the cables with caution hopefully you will not encounter problems. If so my guess is, that you will have a hard time in finding a cable that can hold up. Sadly the stock cables are always more expensive. I do not get it, why companies dont build travel adapters that only charge ur phones built solid with sturdy cables to ensure the transmission of high currents. That way with charger + usb cable is just stupid, even when tis is an all in one solution.
I like this phone very much and i hope, that the cables will not be that sloppy as the cables that Samsung had/ still has. With Current Widget i get readings around 1500 mA (1,5 A) when connected to the stock charger. And yes the LG Charger is an 1,8 A one. I have also flat pins, but received an adapter to be able to connect it in Hugary.
Just sharing thoughts here, that will maybe helpful to someone...
:highfive:

2amp charger, charges my Pro 2 in apprx 1 hour while my old LG 1amp charger fills it in 1.40 hours apprx

ray-lee said:
Is the GP2 Quick Charge (1 or 2) enabled? I can't read anything about it other than it's in Snapdragon chipsets. Not sure if it can be disabled or not.
Click to expand...
Click to collapse
i "think" as long as device has snapdragon it is Quick Charge enabled

I use the "Charging Report" app on my phone, and it reports proper values.
(Around 1500mAh with the LG charger, and around 1600mAh with the 2.0A Samsung charger.)
If your phone is charging slowly, check the CABLE. Cable can broke too.
(Many people complain about their Samsung charging cables, because they just stop delivering power after a while and just charge the device slowly.)

Anyone tried Quick charge 2.0?? https://www.qualcomm.com/products/snapdragon/quick-charge

enkhtwshn said:
Anyone tried Quick charge 2.0?? https://www.qualcomm.com/products/snapdragon/quick-charge
Click to expand...
Click to collapse
All Devices with the Snapdragon 800 have Quick Charge 2.0!

letschky said:
All Devices with the Snapdragon 800 have Quick Charge 2.0!
Click to expand...
Click to collapse
So anyone tried it? That is the question

Yes, I have the Motorola Turbo Charger.

coastalmikey said:
Yes, I have the Motorola Turbo Charger.
Click to expand...
Click to collapse
How long does it charge from 0-50 from50-100 from 0-100?

There aren't many chargers out there. and the ones that are, are usually US 2 pin. I need a UK 3 pin or travel charger (changeable pins) really.

enkhtwshn said:
So anyone tried it? That is the question
Click to expand...
Click to collapse
To achieve full charging speeds, a Quick Charge 2.0 enabled device must be paired with a Quick Charge 2.0 certified adapter

Extra Chargers?

Has anyone found any cheap chargers that can charge this phone like the Essential charger does (really fast)? I have bought two different chargers and neither of them can really even charge the phone. The lock screen says it's charging slowly, and the battery meter acts like it's charging, but it doesn't actually charge. The chargers were both Quick Charge 3.0 chargers too. None of my old phone chargers with a type-c adapter will charge the phone either.

jay_em113 said:
Has anyone found any cheap chargers that can charge this phone like the Essential charger does (really fast)? I have bought two different chargers and neither of them can really even charge the phone. The lock screen says it's charging slowly, and the battery meter acts like it's charging, but it doesn't actually charge. The chargers were both Quick Charge 3.0 chargers too. None of my old phone chargers with a type-c adapter will charge the phone either.
Click to expand...
Click to collapse
Have you tried different cables?
Every charger I own will charge this phone. My Samsung, pixel, Motorola, etc usb type-c chargers will all work.
Sent from my PH-1 using Tapatalk

The phone requires a USB PD (Power Delivery) charger for rapid charging. It must have [email protected] and [email protected]
It doesn't support Qualcomm's Quick Charge.
I ordered this one and it rapid charges. It supports 5V/3A, 9V/3A, 15V/ 3A, 20V/2.25A
https://www.amazon.com/iClever-Delivery-Nintendo-Notebook-Compatible/dp/B07194RXTS/

jay_em113 said:
Has anyone found any cheap chargers that can charge this phone like the Essential charger does (really fast)? I have bought two different chargers and neither of them can really even charge the phone. The lock screen says it's charging slowly, and the battery meter acts like it's charging, but it doesn't actually charge. The chargers were both Quick Charge 3.0 chargers too. None of my old phone chargers with a type-c adapter will charge the phone either.
Click to expand...
Click to collapse
My MacBook pro adapter

Tikerz said:
The phone requires a USB PD (Power Delivery) charger for rapid charging. It must have [email protected] and [email protected]
It doesn't support Qualcomm's Quick Charge.
I ordered this one and it rapid charges. It supports 5V/3A, 9V/3A, 15V/ 3A, 20V/2.25A
https://www.amazon.com/iClever-Delivery-Nintendo-Notebook-Compatible/dp/B07194RXTS/
Click to expand...
Click to collapse
Thanks! Now, what about if I wanted it to just charge normally (not rapidly or slowly) for if if I wanted to leave it charging overnight? Don't think I need to spend the extra money on rapid chargers for that scenario...

jay_em113 said:
Thanks! Now, what about if I wanted it to just charge normally (not rapidly or slowly) for if if I wanted to leave it charging overnight? Don't think I need to spend the extra money on rapid chargers for that scenario...
Click to expand...
Click to collapse
No idea. Honestly, I don't know of anyone who consciously needs to control the speed of their charge. I avoid charging overnight by rapid charging during the day at work.

does it really need PD? they are kind of expensive and there are chargers out there with 5V, 6V, 9V, 12V @ 3A
e.g.:
https://www.amazon.de/CSL-Schnellla...id=1510146615&sr=1-4&keywords=usb+3a+netzteil

Tikerz said:
The phone requires a USB PD (Power Delivery) charger for rapid charging. It must have [email protected] and [email protected]
It doesn't support Qualcomm's Quick Charge.
I ordered this one and it rapid charges. It supports 5V/3A, 9V/3A, 15V/ 3A, 20V/2.25A
https://www.amazon.com/iClever-Delivery-Nintendo-Notebook-Compatible/dp/B07194RXTS/
Click to expand...
Click to collapse
Actually, It *does* support QC 3.0 and USB PD.

compuguy1088 said:
Actually, It *does* support QC 3.0 and USB PD.
Click to expand...
Click to collapse
Essential confirmed on their subreddit that it does not support Qualcomm Quick Charge. It supports USB PD.
Sent from my PH-1 using Tapatalk

Tikerz said:
Essential confirmed on their subreddit that it does not support Qualcomm Quick Charge. It supports USB PD.
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
Then why does the phone indicate it's rapidly charging when plugged into a QC 3.0 charger then?

compuguy1088 said:
Then why does the phone indicate it's rapidly charging when plugged into a QC 3.0 charger then?
Click to expand...
Click to collapse
I'm not sure how Android is programmed to display "Rapidly Charging", but I'm sure it's not by charging standard. Probably based on supplied power, but it definitely doesn't charge as fast as the stock charger. I noticed this with my QC chargers. It will say rapidly charging for a couple minutes and then just not charge at all or say charging slowly. Frustrating as hell so I bought an extra USB PD charger.

My Samsung chargers all work, and charge the phone to 100%. They just say charging, not quick charging, but whatever... The % goes up.
Sent from my PH-1 using Tapatalk

compuguy1088 said:
Then why does the phone indicate it's rapidly charging when plugged into a QC 3.0 charger then?
Click to expand...
Click to collapse
Try using the Ampere app on the Play store. It will show you what amounts of current etc is being used to charge the phone..

USB C Charger,CRDC Quick Charge 3.0 5V/3A 27W Type C Charger for iPhone,Xiaomi,Nexus 6P Nexus 5X,Nintendo Switch,Google Pixel XL
http://s.aliexpress.com/IZBBVbE3
(from AliExpress Android)
I ordered this. Won't be here for awhile though as it's coming from China. I brought the essential because it was cheap, might as well stick to the theme.

compuguy1088 said:
Then why does the phone indicate it's rapidly charging when plugged into a QC 3.0 charger then?
Click to expand...
Click to collapse
Yeah...it doesn't. I'm such a tool I assumed it did and bought two Ankar QC3 wall chargers and a Tronsmart QC3 car charger. None of them are able to charge the phone at all, says that it's charging slowly but doesn't seem as though it's charging at all.

bavarianblessed said:
Yeah...it doesn't. I'm such a tool I assumed it did and bought two Ankar QC3 wall chargers and a Tronsmart QC3 car charger. None of them are able to charge the phone at all, says that it's charging slowly but doesn't seem as though it's charging at all.
Click to expand...
Click to collapse
Phone needs a charger with USB-C Power Delivery and not QC. Anker has at least one model and Incipio has one as well. There are many others on Amazon.. The cool thing about those is that they also change my XPS-13. Only carry one charger when I travel.

I've got a few QC 2/3 chargers and a few USB-C PD chargers and what I've found is that depending on which USB-C to USB-A makes a difference whether I get rapid charge or not.
I'm slowly converting over to USB-C to USB-C but it is stupid expensive for some things like the power packs with USB-C...
Anyway, try a few different cables and see if it works for you, also it seems to work a tiny bit better on the Oreo Beta however my QC 2.0 car charger doesn't charge as fast as it did on 7.1.1 but luckily the car chargers are the cheapest USB-C PD items to buy, roughly about the same price as a cable.
One last note, the same charger and cable don't always go into rapid charging mode so replugging the cable in sometime kicks in rapid mode for me.

What is the best car charger?

Zargone said:
What is the best car charger?
Click to expand...
Click to collapse
Haven't tried it, but something like this with USB PD sounds like it would be good - https://www.amazon.co.uk/Charger-Delivery-Output-Adaptor-Samsung/dp/B01M2BLLVN/
I had my phone plugged into a regular USB jack on a car this weekend and the battery didn't charge at all

Alas, not available in the US...

Power adapter and OTG accessories

Just got my 1+6 and I love it. Just thought I'd share that the 1+ power adapter doesn't work with other usb C cables for fast charge. It'll charge at regular speed but not fast. I have an OTG cable from Amazon that will not work at all. Make sure to buy OEM accessories

halo312 said:
Just got my 1+6 and I love it. Just thought I'd share that the 1+ power adapter doesn't work with other usb C cables for fast charge. It'll charge at regular speed but not fast. I have an OTG cable from Amazon that will not work at all. Make sure to buy OEM accessories
Click to expand...
Click to collapse
Did you put OTG mode on via advanced settings? It will go off automatically after 10 min inactivity. And yes, Dash charging needs original dash charger AND dash cable (or whatever it's called, the red Oneplus cable).
I have cheap chinese OTG-adapter and it works just fine, after enabling OTG mode every time when using.

Eremitus said:
Did you put OTG mode on via advanced settings? It will go off automatically after 10 min inactivity. And yes, Dash charging needs original dash charger AND dash cable (or whatever it's called, the red Oneplus cable).
Click to expand...
Click to collapse
Thanks for the OTG tip. Works like a champ!

what is so special about oneplus cables, it doesn't work for me either.

x111 said:
what is so special about oneplus cables, it doesn't work for me either.
Click to expand...
Click to collapse
Those cables support an higher amperage current passing through and I also think they also have 1 or 2 more contacts in the type-c connector and larger ones in the type a usb

Lorenzo2010 said:
Those cables support an higher amperage current passing through and I also think they also have 1 or 2 more contacts in the type-c connector and larger ones in the type a usb
Click to expand...
Click to collapse
For my nexus6 I have fast charger which kicks up charging up to 9V - 1A.
This charger does not work with oneplus6 and charging only at 5V - 1A.
Also, nexus6 does not fast charging with oneplus charger and charging at 5V - 1A.
I am highly disappointed that we do not have standard for fast charging.
I use magnetic adapter and it's incredible convenient to use and I am not going to go back. And now I have to leave with retarded decision from Oneplus who cannot deliver normal fast charging from any chargers which able to deliver over 1A !!
Shame on you Oneplus !!

You need the cable provided with the phone to dash charge, because of the high current output while charging. Standard cables are rated to handle maximum 2amps, while OP uses 4amps.

Edit: VOOC and rapid charging cables have a special 5th pin used for verification
~Disregard below statement ~
Any cable will work as long as it is rated for 4A. The power brick has to be a dash or VOOC charger.

phillibl said:
Any cable will work as long as it is rated for 4A. The power brick has to be a dash or VOOC charger.
Click to expand...
Click to collapse
No it won't. How does the charger know the cable is rated at 4 amps?
There is stuff in both charger and cable and both must be present for dash charging to work
Sent from my ONEPLUS A6003 using Tapatalk

Alex240188 said:
No it won't. How does the charger know the cable is rated at 4 amps?
There is stuff in both charger and cable and both must be present for dash charging to work
Click to expand...
Click to collapse
I didn't realize there is a 5th pin used as verification. Ideally the power brick and/or phone can detect the resistance of the cable but that's not the case here. Luckily most 4A cables I've found are VOOC or rapid charging compatible.

If someone needs a longer cable:
you can actually use a 3.0 USB extension cable as long as it is rated for more power.
some guys at the op community tested a few cables and confirmed this one working:
https://www.amazon.com/gp/product/B017XUSKVK
i dont know if i can post links to the OP Community but i will do it either
https://forums.oneplus.com/threads/...-a-f-cable-supports-op3-dash-charging.454306/

x111 said:
For my nexus6 I have fast charger which kicks up charging up to 9V - 1A.
This charger does not work with oneplus6 and charging only at 5V - 1A.
Also, nexus6 does not fast charging with oneplus charger and charging at 5V - 1A.
I am highly disappointed that we do not have standard for fast charging.
I use magnetic adapter and it's incredible convenient to use and I am not going to go back. And now I have to leave with retarded decision from Oneplus who cannot deliver normal fast charging from any chargers which able to deliver over 1A !!
Shame on you Oneplus !!
Click to expand...
Click to collapse
Just upgraded the misses from a OP 1 to an OP 6.
Until now we had also been using magnetic usb cables that are soooooo convenient.
My Nexus6 and her OP 1 charge at 1amp with them according to Ampere and were android auto recognized by our cars...
With them the OP6 only charges at 320mA and is not android auto recognized by our cars...
I'm looking for a magnetic usb cable upgrade so OP 6 works as I expect it to... I don't care about quick charging (have never needed it as battery is never empty when i set the phone to charge at night). I care about magnetic uber convenience and android auto recognition in the car.

dwardo said:
Just upgraded the misses from a OP 1 to an OP 6.
Until now we had also been using magnetic usb cables that are soooooo convenient.
My Nexus6 and her OP 1 charge at 1amp with them according to Ampere and were android auto recognized by our cars...
With them the OP6 only charges at 320mA and is not android auto recognized by our cars...
I'm looking for a magnetic usb cable upgrade so OP 6 works as I expect it to... I don't care about quick charging (have never needed it as battery is never empty when i set the phone to charge at night). I care about magnetic uber convenience and android auto recognition in the car.
Click to expand...
Click to collapse
I'm using this one
wsken.my/WSKEN-X-Cable/WSKEN-Micro-USB-Lightning-2.4A-Mini2-Magnetic-X-Cable-Black
already 3rd generation.
I cannot understand why we do not have universal standard magnetic connector,
it's so much more convenient to use.
I hope they will come up with magnetic otg and retarded audio adapter since everyone removing audio jack for no reason at all.