I was working fine, enjoying my new HTC One S with CM9 rom installed. Well the battery life wasnt the best on it, and i didnt install the custom kernel. So I looked for the custom kernel download(on my phone, not on my computer) and i found a .zip file. Well I thought that you could just download the kernel straight to my phone and open it up with "Rom Manager" which i did, it than said i needed to reboot the phone in recovery to continue the installation, so I did... it took me to recovery "to continue the installation" well than I looked away, looked backed down and it was black.... and i have tried powering up, booting into boot loader, booting into recover, and nothing... its just BLACK! nothing works, its literally useless ATM. I really messed up, is there anyway to fix this? Thanks in advanced!
----EDIT----
I think I accidentally flashed the kernel like i would normally flash a rom.... cause i downloaded the .zip file(directly to my phone, not using a computer), than i tapped the download and it asked me if i wanted to open it up with rom manager, so i did. and i think rom manager thought i was flashing a rom, when i wasnt, it was a kernel.... am i screwed? or is there anyway out of this?
Do you know the exact kernel you flashed--where did it come from
Some you need to extract and push
Assume you just tried to boot into bootloader thru phone buttons
Does your pc recognize your phone when plugged in, if so can you open a command window and try to access phone as in adb devices then adb reboot bootloader
assuming you are familiar with sdk adb/fastboot comands
otherwise i don't know what else to say--may be bad--sorry
Came from an XDA thread
Here is where it came from: http://forum.xda-developers.com/showthread.php?t=1708676 from "sun90" (half way down the page "CM9 KERNEL remix edition.zip - [Click for QR Code] (5.53 MB, 9 views) ")
i downloaded that straight to my phone and opened it up with Rom Manager, which i think the app took it as a rom, and installed it like a rom even though it was not a rom. I just tried to access it through adb, it comes up with no devices my PC does recognize it when i plug it in though...
Ive tried to get into bootloader tons of times, it just stays black... :'(
Thanks for your answer!
You flashed a galaxy s2 kernel on your one s? why would you ever think that was a smart thing to do?
Looking at the updater script in that zip it seems it wipes some partitions, the partitions on a SGS2 and the ONE S are different, so if that script accidentally wiped say the hboot partition, or some other critical-for-boot partition, you have a fully bricked phone.
For any devs that may know what partitions are what on the One S, the script wiped
mmcblk0p7, and wrote a zimage to mmcblk0p5
---EDIT---
Normally this is a cwm flashable zip on the Samsung Galaxy S II, which is why rom manager flashed it, as it met all the requirements, the only issue is, it was not made for the ONE S and probably overwrote some important things.
I tried for hours and hours to fix the same issue on a friend's One S (same symptoms, not same cause) to no avail. I tried QPST and telnet and a ridiculous amount of things. Had to bring it to the store and get a new one.
Good luck, but I don't believe there's anything you can do to fix it.
Just answered your question in the help thread, Didnt see this thread too !
Im afraid its not looking good, I think your best bet would be to call your provider and blame it on an OTA update.
And hope for the best
Alright, thanks for the help!
Well it looks like i bricked my phone than.... I thought that CM9 was only on the One S, so I just looked for the CM9 kernel, which obviously was for the sg2, i feel like such a dumb ass now! haha well thanks for all the help guys! ill be heading to the t-mobile store today to blame it on a OTA:]
yeah, others wont agree with what your about to do but........
just act like a complete noob, dont mention anything about software / firmware / ROMs / bootloader etc ect
just say your phone made a noise, you selected update and it died lol
good luck--I know it is heartbreaking
not sure of your situation with carrier, but you could go thru Retention if needed
Hi peeps.
i'm very new to all this but sort of know the basics
i'm running on Axiom now but tried to flash cm10 but after install i got a black screen so had to do a restore.
Today i just flashed venom and after the instal process is done, i hear the start up music but nothing on the screen.
I have had 3 other roms on my phone and never had a problem!
these are the steps i do
download rom - place on sd
put phone in recovery
reset factory
reset cache
install from sd
when it finish's reboot
blank screen.
Am i missing something?
Any help would be great and i can't post on the thread because i'm a noob with less than 10 and dont want to spam my way to the 10 :silly:
you are missing a lot, like reading the OP page and following install instructions
you missed separate flash of boot image and wiping system plus data and caches
i wipe system 3x to be safe
rugmankc said:
you are missing a lot, like reading the OP page and following install instructions
you missed separate flash of boot image and wiping system plus data and caches
i wipe system 3x to be safe
Click to expand...
Click to collapse
Thanks but i think that is now the least of my problems!
I used Goomanager and installed CM10, When I did it i installed teamwin recovery. It started to do a lot of strange things, when it finally rebooted i got a load of errors "phone is not working" nearly every 10 seconds?
it will not connect via usb, i discovered the the SD was not mounted.
I tried to mount the SD but it doesnt work, so i rebooted to recovery and tried to mount there but its coming up with - error unable to mount? ive tried everything but no joy
please please help
Thanks:crying:
see if this is your situation
http://forum.xda-developers.com/showthread.php?t=1630459
can you connect phone to pc and use fastboot commands
rugmankc said:
see if this is your situation
http://forum.xda-developers.com/showthread.php?t=1630459
can you connect phone to pc and use fastboot commands
Click to expand...
Click to collapse
I've got a mac
not sure what fastboot is.
I'll check out the link, and thank you very much for trying to help:good:
sorry i do know what fastboot is, yes can get in to it. but ive gone from CWM to teamwin recovery if i go in to the recovery section but that wont let me do anything because the mount. cant even load the phone up
I don't know Mac commands
My idea is to install htc drivers and set up fastboot/adb on pc--the info can be found in dev section on rooting
then open a command window and and boot into fastboot and flash a new recovery, maybe stock per the link, clear storage and try to get mounted
how did you unlock bootloader--
you will need to do alot of reading on adb/fastboot and flashing roms--first step is to have backups of rom and sdcard
since i don't the Mac commands to do fastboot, someone else will chime in at some point
you can alos go to the noob section in Q&A and resubmit your issue
someone will work you thru this, but in meantime study up on android sdk/fastboot/adb. a necessity to get out of these problems
you are not bricked, just need the info and right steps to get back on track
rugmankc said:
I don't know Mac commands
My idea is to install htc drivers and set up fastboot/adb on pc--the info can be found in dev section on rooting
then open a command window and and boot into fastboot and flash a new recovery, maybe stock per the link, clear storage and try to get mounted
how did you unlock bootloader--
you will need to do alot of reading on adb/fastboot and flashing roms--first step is to have backups of rom and sdcard
since i don't the Mac commands to do fastboot, someone else will chime in at some point
you can alos go to the noob section in Q&A and resubmit your issue
someone will work you thru this, but in meantime study up on android sdk/fastboot/adb. a necessity to get out of these problems
you are not bricked, just need the info and right steps to get back on track
Click to expand...
Click to collapse
im going to use someone elses alp top with windows. i'll ytry the all in one thing because thats how i rooted it in the first place. thanks for helping it means alot
good luck on it
i am extremely new to the rom/flashing/rooting scene. i recently used a "back door" rooting process, which worked great and i did all the recomended actions and apps: supersu titanium backup, root browser, etc. then i wanted to change my boot animation->samsung device-> flash a zip file to allow bootanimation.zip->samsung requires signature verification from stock recovery mode->cwm recovery(which flashes itself to the phone... curious why a custom recovery...or any recovery for that matter is even required if it isnt necessary...) -> recovery menu no longer accesible. i cant flash anything to my phone i tried changing the recovery to twrp but no dice. its giving me this dialog along with caution sign:"system software not authorized by verizon wireless has been found on your phone...etc" the phone is a samsung galaxy legend on verizon prepaid plan it is the jasper version of the samsung galaxy stellar. now for the question... What do i do so that i can flash files to my device?
i dont know much about unlocking the bootloader except that doing so with the wrong program will brick your phone and since im doing this recreationally on my primary phone i dont want to buy a new one. how can i regain access to my recovery menu/ unlock my bootloader?
its not a popular phone so i doubt anyone is going to be able to offer a one touch application to unlock the bootloader but any information would be helpful.if youre still reading this i thank you for any advice and i apologize if i : posted in the wrong section, offended anyone, or came off as a cheap experience-less n00b
EDIT: my phone is running 4.1.2 jellybean, baseband:i200ppvramh1, kernel: 3.0.31, build: jzo54k.i200ppvramh1, dont know if that will help any and before anyone criticizes me remember i am completely new to this forum posting thing but i guarentee i have scrounged this site the world over trying to get help but there just seems to be noone working on this problem the same as me...
i don't know if this questions have been asked 'coz there are more than 1000 pages of questions and to look on all of them means to lose prolly more than a week...
well,i did install that rom,T.R.I.D rom on my gt-s6310,thing is that now when i was trying to push the the other 2 files i got into a problem,i entered in the download mode and when i typed adb devices....suprise,no way to find my device conected to usb,i tryed many times and still nothing,so how can i push that file if the device is not seen ? i have to say that i didn't had that problem be4 installing that rom,so i will like to know if there i missed something or not,i do have installed all in my pc to can make those changes but for some reason i can't see my phone connected,i have in my phone those 2 options activated too...
the other problem i've found was when i did installed the new icons zip file thru the CWM as it said i have to do it and wow,my phone remained stuck on the recovery loop,every time i was rebooting,the phone was getting back in recovery...
i thank very much if someone can help me solve those 2 problems...
i do like very much that custom rom on my phone,it's pretty amazing.
or maybe is another way to push those files without the adb ? maybe using kitchen somehow ? i'm not an advanced user in those things,but maybe someone can explain it to me how to do it if can be done that way...
thank you very much for any help
GUYS!!! SOMEONE HELP ME PLEASE!!!! Okay i have a Galaxy S6 version 5.0.2 running AT&T G920AUC1AOE2. i had it rooted with ping pong root and everything was working alright. so i noticed i didnt have a custom recovery and i needed one to install other root items. I decided to try TWRP and followed the instructions from Techno buzz... just google s6 custom recovery and its the first one! and everything seemed to go fine until i tried to rebooted to get into my TWRP. and when i did all i got was a reboot and the normal start up screen that says Custom Binary Blocked by Reactivation Lock on the top left hand corner in red letters!! it doesnt go past here!!! ive had some experience with rooting and things like that but this time i dont know!!! i tried downloading the Stock Rom from an XDA forum but it was the OCE version... not the one im on which is OE2. so when i tried to install it would get stuck on NAND WRITE START!!! on odin!! i also didnt have USB Debugging on but i dont think thats the problem. the drivers are properly installed...i found a stock rom that is OE2 and i will try with that..PLEASE if anyone can help me i would really love your help!!! also please try to contact me at [email protected] PLEASE THIS IS MY LAST HOPE!!!!
Update
Okay so odin isnt gonna work.. so i found out i had a galaxy s2 lying around that wasnt running smoothly and i was trying to use odin to maybe flash a stock onto it. but i remember i had kies. so i went there and went to the firmware install. asked for the model number and it worked, asked for the serial number and it worked, then it downloaded and everything worked. so then with my s6 it isnt supported so i tried smart switch. i went to firmware install. model number was good, but when i type the serial number the whole program closes and i cant do anything. i would try to use odin to mess my phone up and try A emergency recovery but i cant even write with odin. im getting close so any ideas??
Hi there,
You'd be best served asking for help from the experts who own your device here:
AT&T Galaxy S6 Q&A, Help & Troubleshooting
Good luck