Ok. First off, system sounds are totally fine. Any and all music etc works. The problem comes in when making a call, its just gone. It doesn't ring or anything at all, other side hears nothing as do I. Restarts didn't fix, nor did flashing the modem. Previously a restore fixed it this time it didn't though. What could it be? Is it possibly just a software glitch? This one has me stuck since it just randomly happened, both times it just occurred for no reason.
Maybe the ear speaker is gone. Try to make a call on speaker.
Sent from my skyrocket running something better than yours! BOOM!
was it on stock
r u on tmo
if on tmo - dl tmo jb radio and check md5 b4 flashing.
if still a no go - in recovery full wipe then restore to stock jb w/odin
flash tmo radio
try another tmo sim as it could be sim card related idk
try att sim card to test if u can but need to flash att radio
Smittiegee19 said:
Maybe the ear speaker is gone. Try to make a call on speaker.
Sent from my skyrocket running something better than yours! BOOM!
Click to expand...
Click to collapse
Nah it is just no sound. Almost like the call isnt connecting but it is. No sound at all on speaker or earpiece. I had thought of that.
vincom said:
was it on stock
r u on tmo
if on tmo - dl tmo jb radio and check md5 b4 flashing.
if still a no go - in recovery full wipe then restore to stock jb w/odin
flash tmo radio
try another tmo sim as it could be sim card related idk
try att sim card to test if u can but need to flash att radio
Click to expand...
Click to collapse
It's on StraightTalk. The phone is Unlocked it had MA7 which worked fine also tried LF6 but no change at all. Tried another ST SIM as well, same issues and the SIM worked in the other phone. In fact both did. It was not on stock. It is on PAC V19.
Try radio version UCMC1. I don't think UCLF6 is supported on that version of PAC is it? I would also check your APN settings if you haven't done so already. Otherwise its probably a hardware problem.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jadwv2210 said:
Try radio version UCMC1. I don't think UCLF6 is supported on that version of PAC is it? I would also check your APN settings if you haven't done so already. Otherwise its probably a hardware problem.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Even if it was APN it shouldn't suddenly unset. As for modem AFAIK it should work since they get signal. I may end up just doing an ODIN to total stock then checking it. If it still doesn't work I would guess hardware but that means I now have an expensive ass brick that literally nothing has changed on and it no longer works properly.
DarkStarr said:
Ok. First of, system sounds are totally fine. Any and all music etc works. The problem comes in when making a call, its just gone. It doesn't ring or anything at all, other side hears nothing as do I. Restarts didn't fix, nor did flashing the modem. Previously a restore fixed it this time it didn't though. What could it be? Is it possibly just a software glitch? This one has me stuck since it just randomly happened, both times it just occurred for no reason.
Click to expand...
Click to collapse
I'm having a similar problem after I rooted my phone and installed CM10. No sound or mic on phone, Music, YouTube, Netflix doesn't play sound either but I get other system sounds like phone ring, etc.Now my phone will work if I put it on speakerphone and I can hear the call and they can hear me. Also everything works if I use Bluetooth. I'm subscribing to this thread in the hopes you can figure it out and I can try it as well.
DarkStarr said:
Even if it was APN it shouldn't suddenly unset. As for modem AFAIK it should work since they get signal. I may end up just doing an ODIN to total stock then checking it. If it still doesn't work I would guess hardware but that means I now have an expensive ass brick that literally nothing has changed on and it no longer works properly.
Click to expand...
Click to collapse
dfwjose said:
I'm having a similar problem after I rooted my phone and installed CM10. No sound or mic on phone, Music, YouTube, Netflix doesn't play sound either but I get other system sounds like phone ring, etc.Now my phone will work if I put it on speakerphone and I can hear the call and they can hear me. Also everything works if I use Bluetooth. I'm subscribing to this thread in the hopes you can figure it out and I can try it as well.
Click to expand...
Click to collapse
the answer has been given repeatedly and stickied, if having issues on roms and cant figure out if its hw or sw, wipe everything and restore to stock via odin, if still having probs then its more than likely a hw problem, flashing stock w/odin is really not that hard todo on the skyrocket and the howto is also stickied
vincom said:
the answer has been given repeatedly and stickied, if having issues on roms and cant figure out if its hw or sw, wipe everything and restore to stock via odin, if still having probs then its more than likely a hw problem, flashing stock w/odin is really not that hard todo on the skyrocket and the howto is also stickied
Click to expand...
Click to collapse
Yea I figured as much. Just thought it was really odd that it happened twice and last time just restoring a backup fixed it.
Its the modem, and its been stated many times if your on a jelly bean ROM that you need a jelly bean radio
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
holeindalip said:
Its the modem, and its been stated many times if your on a jelly bean ROM that you need a jelly bean radio
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Don't be a moron. v19 is 4.1.2, it was running UXUMA7 which is 4.1.2 when the error occurred. I tried UCLF6 which is ICS but it changed nothing at all. I also reflashed UXUMA7 to no effect. I know what I am doing, I know what I am talking about but since this isn't a phone that I personally use nor update all the time (ie I don't keep up on things for the Skyrocket) I dunno if there is a bug that causes this or what. That is why I posted, I figured if it was a glitch people here would know and could give me a clue. Its fine now though I flashed it to stock and fixed it.
vincom said:
the answer has been given repeatedly and stickied, if having issues on roms and cant figure out if its hw or sw, wipe everything and restore to stock via odin, if still having probs then its more than likely a hw problem, flashing stock w/odin is really not that hard todo on the skyrocket and the howto is also stickied
Click to expand...
Click to collapse
Long story short, that didn't necessarily work in my case so I have some other issue. Flashed back to stock and sound works but the phone starts freezing after the first time I reboot, turn off the phone, or swap in a new battery.
DarkStarr said:
Don't be a moron. v19 is 4.1.2, it was running UXUMA7 which is 4.1.2 when the error occurred. I tried UCLF6 which is ICS but it changed nothing at all. I also reflashed UXUMA7 to no effect. I know what I am doing, I know what I am talking about but since this isn't a phone that I personally use nor update all the time (ie I don't keep up on things for the Skyrocket) I dunno if there is a bug that causes this or what. That is why I posted, I figured if it was a glitch people here would know and could give me a clue. Its fine now though I flashed it to stock and fixed it.
Click to expand...
Click to collapse
I'm glad you got it fixed moron
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Related
Hey all !
I've bought a Samsung Galaxy S2 from Rogers, here in Canada. The model on the box clearly states SGH-I727R. I've managed to get it rooted and I've installed Sky-ICS 7.04 custom ROM on it. Everything went fine but I'm having a small issue.
The 4G signal keeps dropping. I can call just fine but about 10-15 seconds after the call ends, 4G drops and I can't use data anymore.
Everytime I want to use the Internet, I have to make a call first then I can use it but as soon as my phone goes on sleep mode, 4G shuts down and I've got to do it all over again. I've tried calling Rogers Tech support but they told me I'm registered on the network and that I should normally be having signal.
I'm pretty sure this is a newbie question but I'm new to Android and I haven't found much help by searching the forums so far.
Edit : The "Turn on Plane Mode" thingy doesn't work at all. Also, Rogers Tech suggested to manually search for a carrier and select Rogers but that didn't change a thing. Also, selecting Automatic Mode doesn't do a thing.
search for forums for the darkside script, and the ucla3 modem. reboot into cwm amd under mounts and storage format cache, data and system. Then flash darkside. Then ucla3. Then skyics. Reboot and let phone sit for 20 min, then reboot again. report back to us :-D
Been a couple hours now and it's still up and running. I'll post results tomorrow morning.
Thanks a lot :-D
I'm guessing my instructions worked then. Hit that thanx button bro ;-)
icenight89 said:
I'm guessing my instructions worked then. Hit that thanx button bro ;-)
Click to expand...
Click to collapse
I let my phone recharge overnight. When I woke up this morning, it wasn't working. Rebooted, still wouldn't work. I had no use for it so I let it sit on my desk till I got to work. As we speak, it appears to be working. It seems intermitent but it works twice as often now O.O
What I did :
- Flashed DarkScript
- Flashed UCLA3 Modem (How come is that file like 350mb?)
- Flashed Sky-ICS Speed 7.0
- Applied Sky-ICS 7.04 Update
Anything else I've missed ? I've seen another post where someone explained the same thing but with UCLA3 Kernel + Faux Kernel. Should I try that ?
ur flashing a ucla3 rom lol, the radio is only 20 mb. Ur flashing a rom ontop of another rom, no wonder its not working
icenight89 said:
ur flashing a ucla3 rom lol, the radio is only 20 mb. Ur flashing a rom ontop of another rom, no wonder its not working
Click to expand...
Click to collapse
I dunno, I did a search on the forum for UCLA3 modem. Ended up with that file, which is weird because I was expecting a smaller file too. Do you happen to have a link to that file ?
Search for this radio " REX_MOd_LA3" and give it a shot..
Sent from my SAMSUNG-SGH-I727 using xda premium
Bahahaha
Sent from my SAMSUNG-SGH-I727 using Tapatalk
nrm5110 said:
Bahahaha
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Click to expand...
Click to collapse
Now THAT was quite helpful
Nope. Still no luck. Flashed DarkScript, flashed UCLA3 Radio then Sky-ICS 7.0 and 4G still drops randomly.
Not sure what's left to do at this point ...
This seems a very useful topic (at least to me )
So what is the sequence of flashing? :
1. ROM
2. script
3. radio
Do we have to wipe the data every time we flash each of those
Are you doing the wipes that were suggested?
After all this flashing and running different stuff you've probably got loads of crap in your caches.
I believe the order is
1. Script
2. ROM
3. Radio
but I did Script, Radio THEN ROM, which I believe is incorrect, unless I am mistaken
Are you doing the wipes that were suggested?
After all this flashing and running different stuff you've probably got loads of crap in your caches.
Click to expand...
Click to collapse
Yes, I did the wipe as suggested. Anyway, I think DarkScript does it for you aswell.
You just need to start over, wipe, Odin stock.
Sent from SKYROCKET
NexusMod 4.0
Romracer 0.3
ShroudOfAgony said:
Now THAT was quite helpful
Click to expand...
Click to collapse
That guy has a history of trolling
And I agree with xcrazydx, I recommend starting over. Hopefully you didnt start adding apps and customizing yet. If so use TB and restore it later
Sent via Samsung Skyrocket with Sky ICS
skyrocketeer said:
That guy has a history of trolling
And I agree with xcrazydx, I recommend starting over. Hopefully you didnt start adding apps and customizing yet. If so use TB and restore it later
Sent via Samsung Skyrocket with Sky ICS
Click to expand...
Click to collapse
Reinstalled Stock Rogers ROM. Did all previous steps. Tried to flash custom Boot Animation instead of TPC V3 animation (Yeah, I switched from Sky-ICS to TPC as I thought I'd check if it is ROM-related...). Phone was stuck on Boot logo for a good 15 minutes. Pulled battery, re-flashed using Odin + Stock ROM. BSOD while flashing.
Go Windows !
I'm re-flashing using Odin.
I'll keep this thread up-to-date as much as possible.
Edit : Flashing worked. Yay for unbricked phone !
ShroudOfAgony said:
I believe the order is
1. Script
2. ROM
3. Radio
but I did Script, Radio THEN ROM, which I believe is incorrect, unless I am mistaken
Yes, I did the wipe as suggested. Anyway, I think DarkScript does it for you aswell.
Click to expand...
Click to collapse
The last two steps are independent of each other. It doesn't matter.
Start again from stock though.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
kr3w1337 said:
The last two steps are independent of each other. It doesn't matter.
Start again from stock though.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Click to expand...
Click to collapse
Seems to be working so far under TPC V3, starting from Stock ROM + DarkScript. 4G icon disappears when under WiFi(Which is normal, I guess) and reappears whenever it uses 4G(SMS/Call).
Problem solved, so far ! We'll see how it's going tomorrow
Thanks a lot to everyone for the help, really appreciated. Great community !
ShroudOfAgony said:
Seems to be working so far under TPC V3, starting from Stock ROM + DarkScript. 4G icon disappears when under WiFi(Which is normal, I guess) and reappears whenever it uses 4G(SMS/Call).
Problem solved, so far ! We'll see how it's going tomorrow
Thanks a lot to everyone for the help, really appreciated. Great community !
Click to expand...
Click to collapse
Yes, normal and glad it's fixed!
Hi, I've been fighting this problem for about a month. I'm certainly really frustrated.
I detected some time ago that, when someone tries to make a voice call yo my number, my phone seems not to receive the call (or the sequence required for the phone app to show the incomming call is broken at some point, beginning at the radio fw). I've tried many things, like flashing other radios, installing rils, reinstalling the rom (I'm using Revolution HD 7.0.4). The problem still happends every time.
Of course the first step I took was make a complaint to the phone company (Movistar Argentina); they make several tests, and finally change the sim card for a new one. Same as before.
The sim card and the company service seems to work fine, since when I put the same sim card in another phone, I had no problem to receive calls.
I thought full stock restore may be helpful, but I really don't know how to do that since I suspect not everything is placed back as it was OTB. For instance, I don't know how can be the radio+ril can be restored to factory defaults.
Any suggestions will be very appreciated.
Best regards,
Dario
If you can find access to the ruu for your region then you can just run that and it will restore everything to default. I'm not sure if since you are in a different country that you need a different ruu. If you can use the the American 2.47.502.7, I can provide a link. Also have you tried backing up just stuff you need from your sd card and wiping it. Sometimes there can be a file there that will cause issues.
Sent from my Inspire 4G using xda premium
Gizmoe said:
If you can find access to the ruu for your region then you can just run that and it will restore everything to default. I'm not sure if since you are in a different country that you need a different ruu. If you can use the the American 2.47.502.7, I can provide a link. Also have you tried backing up just stuff you need from your sd card and wiping it. Sometimes there can be a file there that will cause issues.
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
Thanks four your reply.
I actually used the stock rom (I bought the device in America) for several months until change to Revolution ROM, so if you can provide me with a link I'll be grateful. I tried downloading the update from HTC official site, but seems to be an upgrade only application, I cant really tell. It ended up stopping with an error code.
I'll try also completely formatting the sd card.
Here you go. Make sure to install HTC sync on pc and leave it running in background. Then just plug in phone and run from pc
Ruu US 2.47.502.7
Sent from my Inspire 4G using xda premium
Gizmoe said:
Here you go. Make sure to install HTC sync on pc and leave it running in background. Then just plug in phone and run from pc
Ruu US 2.47.502.7
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
Thanks a lot, start downloading right now.
I've just installed Revolution 6.3.3, since I read in some other post that it comes with a RIL, and there's a suggestion about which radio version to use with it. So, after formatting every partition, sd card included, I flashed the proper radio and RHD. For the moment, it seems the phone is working fine, but can't be sure about ir since previously it also had some "god moments". Anyway, I'll keep watching how it behaves for a couple of days.
As a measure of last resort I'll install the stock rom Gizmoe kindly provided.
Thanks again, I'll report back with the results!
tripero78 said:
I'll report back with the results!
Click to expand...
Click to collapse
So far, so good
After a while, even with a clean RHD 6.3.3 installation, I'm not receiving calls again.
I'm able to make a call, receive sms, use data connection (wifi and 3g), pretty much everything but receive a voice call.
Don't really what to do anymore, I'm considering a hw problem now...
tripero78 said:
After a while, even with a clean RHD 6.3.3 installation, I'm not receiving calls again.
I'm able to make a call, receive sms, use data connection (wifi and 3g), pretty much everything but receive a voice call.
Don't really what to do anymore, I'm considering a hw problem now...
Click to expand...
Click to collapse
Have you tried reversing to s on. Wiping SD card and then running the ruu I provided. If it still happens with complete stock then I would agree its a hardware or sim card issue.
Sent from my Inspire 4G using xda premium
Gizmoe said:
Have you tried reversing to s on. Wiping SD card and then running the ruu I provided. If it still happens with complete stock then I would agree its a hardware or sim card issue.
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
Ok I've just reversed to s-on with aahk-13012012. The scripts automatically downloaded HTC ATT stock rom, and it seems to be the same version you provided me earlier.
Then, updated to the latest rom published in HTC support site.
Again, as under a clean RHD rom, the first couple of hours everything works fine. So I'm gonna test it every day for 3 days in a row and see what happends.
Thanks again!
tripero78 said:
Ok I've just reversed to s-on with aahk-13012012. The scripts automatically downloaded HTC ATT stock rom, and it seems to be the same version you provided me earlier.
Then, updated to the latest rom published in HTC support site.
Again, as under a clean RHD rom, the first couple of hours everything works fine. So I'm gonna test it every day for 3 days in a row and see what happends.
Thanks again!
Click to expand...
Click to collapse
Nope, sadly not so many hours later, same problem as before.
I'm going back to RHD, s-off and root, an run an app I found in this forum that allows me to check some system logs. I'm interesting in monitoring the radio log.
Ask your carrier for a new sim. They should just give you one. That's what I would try next.
Sent from my Inspire 4G using xda premium
Gizmoe said:
Ask your carrier for a new sim. They should just give you one. That's what I would try next.
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
Actually, before trying flashing new roms or downgrading to previous versions, I asked for a new simcard. I'm using the new one now for about a week
tripero78 said:
Actually, before trying flashing new roms or downgrading to previous versions, I asked for a new simcard. I'm using the new one now for about a week
Click to expand...
Click to collapse
Ok. I assume you have tried different radios and even probably switched when ruu was flashed.
Sent from my Inspire 4G using xda premium
Gizmoe said:
Ok. I assume you have tried different radios and even probably switched when ruu was flashed.
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
Yes, I've tried many radios and rils.
I can't really tell when exactly the incomming calls problem started, but since the last time I remember not having the problem, I changed the service provider and tried installing AOSP (aospX-1.0.0-BR4-DHD), with the corresponding radio and ril. I didn't liked it, so I went back to RHD (again, with the proper radio). That's why I thought reversing to stock sw could reverse the problems, if any of them were caused by rom/radio installations.
Now I'm back to RHD 7.0.3, and don't really thing flashing some other radio will help at all, but is there some recommendation about it I'll certainly consider it.
As allways, I'm receiving calls again. That could last for several hours.
It would be very useful if there is any script or app to debug real-time events related to incomming calls, so I can figure out what is really happening.
Thanks in advance, once again
Yeah it seems something in the hardware is malfunctioning. You have ruled out the software.
Sent from my Inspire 4G using xda premium
Gizmoe said:
Yeah it seems something in the hardware is malfunctioning. You have ruled out the software.
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
Yeap, sadly there is no support in my country
Thanks for all your help!
Something strange (at least for me) happend.. Before flashing back RHD, I formatted all partitions (even made a new sd partition and formatted it). So, as far as I know, that completely wipes every peace of data.
But... my home wireless connected automatically!! no need to enter password or select it from the list of available wifi networks. Don't know where that configurations are stored, but it seems something is not being wiped up as I expected...
tripero78 said:
Something strange (at least for me) happend.. Before flashing back RHD, I formatted all partitions (even made a new sd partition and formatted it). So, as far as I know, that completely wipes every peace of data.
But... my home wireless connected automatically!! no need to enter password or select it from the list of available wifi networks. Don't know where that configurations are stored, but it seems something is not being wiped up as I expected...
Click to expand...
Click to collapse
WiFi settings are synced with google account. Tripped me out the first time too.
Sent from my Inspire 4G using xda premium
Gizmoe said:
WiFi settings are synced with google account. Tripped me out the first time too.
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
Can't beleive it!
I did a full wipe and flashed the CM10.1 nightly released for the d2vzw this morning. When it rebooted I had no cell service. Looking in settings i have the proper IMEI number but my cell number is listed as 000-000-1361, MIN is 1361, PRL is 1. what can I do to fix it? I tried restoring a nandroid but the result is the same. Any help would be greatly appreciated!
RESOLVED
james3kral said:
I did a full wipe and flashed the CM10.1 nightly released for the d2vzw this morning. When it rebooted I had no cell service. Looking in settings i have the proper IMEI number but my cell number is listed as 000-000-1361, MIN is 1361, PRL is 1. what can I do to fix it? I tried restoring a nandroid but the result is the same. Any help would be greatly appreciated!
Click to expand...
Click to collapse
Okay so i believe this was my fault for flashing the latest cm 10.1 nightly with my build.prop edited to galaxy nexus values to allow google wallet functionality. removing sim card, starting phone, shutting down phone, inserting sim card, and starting phone fixed the problem
james3kral said:
Okay so i believe this was my fault for flashing the latest cm 10.1 nightly with my build.prop edited to galaxy nexus values to allow google wallet functionality. removing sim card, starting phone, shutting down phone, inserting sim card, and starting phone fixed the problem
Click to expand...
Click to collapse
I ran into the same problem but after trying you fix I still have no service. ?????
TheBurgh said:
I ran into the same problem but after trying you fix I still have no service. ?????
Click to expand...
Click to collapse
I am having the same problem. The phone wont still activate. Please help!!
james3kral said:
Okay so i believe this was my fault for flashing the latest cm 10.1 nightly with my build.prop edited to galaxy nexus values to allow google wallet functionality. removing sim card, starting phone, shutting down phone, inserting sim card, and starting phone fixed the problem
Click to expand...
Click to collapse
Any one try Odin back to stock?
I have a similar issue and I have been going around and around with it without any luck. I restored my latest backup and I still have 000-000-3257 with a PRL of 1. I will try the ops recommendation and will report back.
Odin to stock is my next move unless someone else can think of something else to try.
Try clearing dalvik cache in recovery. Fixed it for me on AOKP. Had the exact same thing where my phone number was a bunch of zeroes. Still had service though when I hit the home button to bypass the activation screen.
Sent from my SCH-I535 using Tapatalk 2
I tried to remove the sim, and boot, and readd the sim and boot but no go. I will try it again but then I think I am going back to stock to see if that works.
Everything still works fine. No need to get worried......it just doesn't report your phone number accurately. Its not like it actually effects functionality. I ran it with an f'ed phone number for 3 days. Everything ran fine. Don't sweat it. If its a problem, wait until tomorrows official nightly comes out tonight and you'll be set.
TechSavvy2 said:
Everything still works fine. No need to get worried......it just doesn't report your phone number accurately. Its not like it actually effects functionality. I ran it with an f'ed phone number for 3 days. Everything ran fine. Don't sweat it. If its a problem, wait until tomorrows official nightly comes out tonight and you'll be set.
Click to expand...
Click to collapse
My issue is it is affecting my functionality. My phone is not working and whenever I call out I get a generic message saying my phone is not active.
I restored a backup from when I first rooted. Now my phone number is listed properly and when I get into a 4G coverage area I can get data, but I still can't call out and it shows I am roaming when I am in a 3G area.
OP on CM10.1 says that dirty flashing Unofficial 10.1 build 12/17/12 will restore data. Any luck with this fix?
Sent from my SCH-I535 using xda app-developers app
dknell said:
OP on CM10.1 says that dirty flashing Unofficial 10.1 build 12/17/12 will restore data. Any luck with this fix?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
you can try that or mastamoons both have been reported to work
mastamoon said:
Here is my unofficial 10.1 build as of 3:00pm EST.
Has working data and increased MMS picture size mod. Otherwise is stock CM10.1
http://bit.ly/12yrtcw
Click to expand...
Click to collapse
Droosh said:
Thanks for sharing! I did a full data wipe and installed this and it activated right away.
Click to expand...
Click to collapse
I was very unlucky and the dirty flash didnt work for me. However, I did have a backup of my IMEI and was able to flash it back to my phone.
I ran into the same problem after flashing 10.1... lost IMEI and stuck on roaming, had no backup.
To fix it i did the following
1) Odin back to stock
2) use this tool http://forum.xda-developers.com/showthread.php?t=1867442
3) reprovish the phone using this code in the dialer *2767*3855#
IMEI restored and no longer on roaming
brandao.gabe said:
I ran into the same problem after flashing 10.1... lost IMEI and stuck on roaming, had no backup.
To fix it i did the following
1) Odin back to stock
2) use this tool http://forum.xda-developers.com/showthread.php?t=1867442
3) reprovish the phone using this code in the dialer *2767*3855#
IMEI restored and no longer on roaming
Click to expand...
Click to collapse
THANK YOU!. I could not get the IMEI/ERI tool to work, but I did get *2767*3855# code to work. I had to roll back to a older version of the official rom (I think rolling back the radio would have been OK) but I am not up and working.
fowen said:
THANK YOU!. I could not get the IMEI/ERI tool to work, but I did get *2767*3855# code to work. I had to roll back to a older version of the official rom (I think rolling back the radio would have been OK) but I am not up and working.
Click to expand...
Click to collapse
I flashed back to stock as well and then used the same number to reprovision. After that everything worked fine it fixed the roaming, incorrect number, PRL, and all. I never lost my IMEI so I didnt do that step. but if you flash back to the cm 10.1 before they fix the data it will happen again :laugh:
Please read forum rules before posting
Questions go in Q&A
Thread moved
Just change CDMA subscription to ruim/sim and toggle airplane mode...
I've never found a reason to have to Odin to anything.
Sent from my SCH-I535 using xda app-developers app
ajrty33 said:
Just change CDMA subscription to ruim/sim and toggle airplane mode...
I've never found a reason to have to Odin to anything.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I can't remember for sure, but I think that is something that the VZW tech had me do, and it didn't work. Maybe someone else who is having the issue can test and comment.
ajrty33 said:
Just change CDMA subscription to ruim/sim and toggle airplane mode...
I've never found a reason to have to Odin to anything.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
This fixed it for me! Thank you very much!
Sent from an unlocked Galaxy S 3! Screw you Verizon!
Hello everyone, I'm new here and new to all the rooting and flashing business.
I just installed CyanogenMod 7.2 on my LG-P999 for the first time. Literally everything was going well except for the fact that I can't receive text messages. When I text people they receive it though, and call still works perfectly. I haven't tried of mobile network works yet because I don't have enough prepaid load
I should also mention that I am not using T-Mobile anymore as I am in another country. My SIM is connected to Globe Telecom in the Philippines.
I've tried restoring my backup of the stock ROM, yet that doesn't bring the texts in either, and it disconnects my network when I try running a USSD code. I really can't pinpoint the problem so can anyone please help me out? :crying:
Thank you
Go into wireless settings and make sure your APN is set up correctly.
If that doesn't work, maybe you need to flash the baseband fix. I can't link to it from my phone, but do a search on the forums.
Sent from my LG-P999 using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=1776843 (link to baseband fix)
If you're on the newest baseband (march 2012) then flash the first link.
redmonke255 said:
Go into wireless settings and make sure your APN is set up correctly.
If that doesn't work, maybe you need to flash the baseband fix. I can't link to it from my phone, but do a search on the forums.
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
Pain-N-Panic said:
http://forum.xda-developers.com/showthread.php?t=1776843 (link to baseband fix)
If you're on the newest baseband (march 2012) then flash the first link.
Click to expand...
Click to collapse
Okay, I flashed that baseband. I also took the initiative and flashed Mazout360's custom kernel, but still no dice
Have you checked your apn settings? Do a Google search for what your device and carrier's apn settings should be and make sure they match.
On a side note (not surrle if this will work or not but worth a shot) download Getril from the playstore. Its free. Open it and use it to check to make sure your ril and baseband are matching. When i flashed cm7 my ril and baseband did not match
-custom sig.
Pain-N-Panic said:
Have you checked your apn settings? Do a Google search for what your device and carrier's apn settings should be and make sure they match.
On a side note (not surrle if this will work or not but worth a shot) download Getril from the playstore. Its free. Open it and use it to check to make sure your ril and baseband are matching. When i flashed cm7 my ril and baseband did not match
-custom sig.
Click to expand...
Click to collapse
Yeah, my APN is perfectly fine, double checked online. I think it even got the settings straight from the SIM.
And oh boy. It says "Unkown RIL file found" and that my "RIL and baseband 'might' match". So yeah, I probably should download a new RIL, but do you know which one it is? I'm using the March 2012 baseband with the fix you linked earlier.
This really sounds like your sim card isn't working right. Maybe you could try getting a new one and see if that works. As for ril download getril and have it install v21y.
Okay, I took it to the extreme and completely restored my stock ROM, flashed the stock recovery, and unrooted my phone.
And... I get the same problems as with CM7...
I put in my mom's SIM card (same carrier) in my phone too to try it out. Again, same issues. Tried it with my dad's (different carrier). And again, same issues.
A peculiar thing I found is when I type in the USSD code *143# (the code for managing your prepaid account), the calling app crashes and the whole phone disconnects from the network service. At that point there's no way for the radio to work again except for a reboot.
This is getting really weird...
I'm out of idea man. The only thing left that I could think of would be to use ROM for recovery using NvFlash. I've seen Mansa_Noob recommend it to people telling them that it basically rebuilds the phone from scratch at the lowest possible software level.
http://forum.xda-developers.com/showthread.php?t=1248644 Here's the link to the thread about ROM for recovery. I have never used it and I know nothing about using KDZ firmware of LG updater tool. All I know about this method really is that it's a last resort for the G2X that makes it "unf**kable" lol
Pain-N-Panic said:
I'm out of idea man. The only thing left that I could think of would be to use ROM for recovery using NvFlash. I've seen Mansa_Noob recommend it to people telling them that it basically rebuilds the phone from scratch at the lowest possible software level.
http://forum.xda-developers.com/showthread.php?t=1248644 Here's the link to the thread about ROM for recovery. I have never used it and I know nothing about using KDZ firmware of LG updater tool. All I know about this method really is that it's a last resort for the G2X that makes it "unf**kable" lol
Click to expand...
Click to collapse
^^ QFT
If a NvFlash doesn't resolve it then I don't know what will.
I have a GS2 running Cyanogemod 10.1.2 (Android 4.2.2) on AT&T. The main issue I have is that of the service for calling/texting being extremely sporadic (as in, most of the time, it either doesn't have service at all or says it has service, but is unable to do anything). I gets texts hours after the person sent them, and I miss almost all calls.
It's not just an issue of spotty service or a messed up SIM card, since I can put the card into my other phone and is works perfectly. It's also probably not a radio issue, since WiFi is unaffected and I've reflashed a few different radios a few different times.
I've also tried just restoring an old backup or two, reinstalling an older version of Cyanogemod, and messing with the APN's (which, as far as I've been able to find online, are at the correct settings).
Rebooting and turning off WiFi sometimes seem to help, but I haven't found any consistent pattern with that.
Does anybody know what's going on?
Please tell me you're using the ucmc1 radio? If not, flash it and do some reading first next time.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
bps119 said:
Please tell me you're using the ucmc1 radio? If not, flash it and do some reading first next time.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Yes, I have the UCMC1 radio.
cdwscout said:
Yes, I have the UCMC1 radio.
Click to expand...
Click to collapse
Hi - FWIW I had this problem for a while - wasnt using that ROM but i had to try a few different radios until i found one that worked. I would suggest trial and error. I would tell you which one Ended up working but my screen is broken... i do remember UCMC1 worked for me, but i think another one gave me more bars at my house, so i stuck with that.
bgcole said:
Hi - FWIW I had this problem for a while - wasnt using that ROM but i had to try a few different radios until i found one that worked. I would suggest trial and error. I would tell you which one Ended up working but my screen is broken... i do remember UCMC1 worked for me, but i think another one gave me more bars at my house, so i stuck with that.
Click to expand...
Click to collapse
Well, I tried all the JB and ICS radios for the GS2 that are on the sticky (as well as some of the GB) and none of them worked. At this point, I think I'll try restoring to stock to see if that does anything.