Database Info

What is super cid

I'm in the process of doing s off on my sensation and I was wondering what super cid is ...also can you do s off flash a custom recovery and flash a custom rom without super c I d
Sent from my HTC Sensation 4G using XDA Premium App

Super CID "allows you to flash ANY ROM to the device regardless of the carrier" (taken straight from the S-OFF sticky). You can certainly S-OFF, install custom recovery, and begin flashing custom ROMs without Super CID, but you will be limited in your choice of ROMs to those that are the same carrier as you have. Acquire Super CID and you're more or less free to flash whatever ROMs you want from the dev section.

Jesushasadroid said:
I'm in the process of doing s off on my sensation and I was wondering what super cid is ...also can you do s off flash a custom recovery and flash a custom rom without super c I d
Sent from my HTC Sensation 4G using XDA Premium App
Click to expand...
Click to collapse
CID is the Country Identifier, a code which is stored on your phone and software uses to determine which country or region the phone is for. HTC updates, for example, use it to determine (among other things) which languages to install.
SuperCID is a special code, 11111111, which means that software from any region can be installed.
While SuperCID may seem handy, note that if you are only interested in debranding your phone, the OTA (over the air) updates which HTC sends will not be available for your phone, since there is no specific region defined. So, in such cases, you should choose a specific CID for your region.

super cid change
can u pls direct me on how to change my super cid to a specific cid.ASP PLS.:fingers-crossed:
sowen222 said:
CID is the Country Identifier, a code which is stored on your phone and software uses to determine which country or region the phone is for. HTC updates, for example, use it to determine (among other things) which languages to install.
SuperCID is a special code, 11111111, which means that software from any region can be installed.
While SuperCID may seem handy, note that if you are only interested in debranding your phone, the OTA (over the air) updates which HTC sends will not be available for your phone, since there is no specific region defined. So, in such cases, you should choose a specific CID for your region.
Click to expand...
Click to collapse

albabs said:
can u pls direct me on how to change my super cid to a specific cid.ASP PLS.:fingers-crossed:
Click to expand...
Click to collapse
are you on S-OFF?
if yes then connect your device from bootloader to pc(in the hboot screen should say fastboot usb)
open a cmd window in your adb and fastboot folder and type
fastboot oem writecid <<name of cid>>
fastboot getvar cid(to cinfirm that your cid has chnaged)

rzr86 said:
are you on S-OFF?
if yes then connect your device from bootloader to pc(in the hboot screen should say fastboot usb)
open a cmd window in your adb and fastboot folder and type
fastboot getvar cid(just to know your current cid-> write it somewhere if you want)
fastboot oem writecid 11111111
fastboot getvar cid(to cinfirm that your cid has chnaged)
Click to expand...
Click to collapse
Mate i think he was asking about other cid not supercid (probably he is now on supercid )

Mile_zdr said:
Mate i think he was asking about other cid not supercid (probably he is now on supercid )
Click to expand...
Click to collapse
you are right
i am editing my post

rzr86 said:
are you on S-OFF?
if yes then connect your device from bootloader to pc(in the hboot screen should say fastboot usb)
open a cmd window in your adb and fastboot folder and type
fastboot oem writecid <<name of cid>>
fastboot getvar cid(to cinfirm that your cid has chnaged)
Click to expand...
Click to collapse
A tiny small little thing:
fastboot oem writecid <<name of cid>>
fastboot reboot bootloader
fastboot getvar cid
Happy to help.

Super CID is just use for flashing any custom Rom that I want?or it is useful for flashing any RUU too?
for change the CID,I dont know the CID of my region or the CID of the ROM's region that I want to flash,I know the name of region,but CID shoud be 8-characters code of region,can anyone direct me to the thread that collected all of CIDs of the countries??...thank you

hasti.fa20 said:
Super CID is just use for flashing any custom Rom that I want?or it is useful for flashing any RUU too?
for change the CID,I dont know the CID of my region or the CID of the ROM's region that I want to flash,I know the name of region,but CID shoud be 8-characters code of region,can anyone direct me to the thread that collected all of CIDs of the countries??...thank you
Click to expand...
Click to collapse
supercid is only for flashing any kind of ruu.exe
it isn't necessary for custom roms
also see here
http://forum.xda-developers.com/showthread.php?t=1195475

rzr86 said:
supercid is only for flashing any kind of ruu.exe
it isn't necessary for custom roms
also see here
http://forum.xda-developers.com/showthread.php?t=1195475
Click to expand...
Click to collapse
So, if I have supercid I can flash any ruu? I have a att HTC one x+ evitare..which ruu's can I flash then? Also, does bootloader need to be relocked?

Tmobilefan906 said:
So, if I have supercid I can flash any ruu? I have a att HTC one x+ evitare..which ruu's can I flash then? Also, does bootloader need to be relocked?
Click to expand...
Click to collapse
if you want to supercid you must be on S-OFF first
about bootoader you don't need to relock it if you are on S-OFF
by the way why are you asking here and not in your device's thread?

rzr86 said:
if you want to supercid you must be on S-OFF first
about bootoader you don't need to relock it if you are on S-OFF
by the way why are you asking here and not in your device's thread?
Click to expand...
Click to collapse
Sorry. Nobody was answering in other
---------- Post added at 08:20 PM ---------- Previous post was at 08:16 PM ----------
rzr86 said:
if you want to supercid you must be on S-OFF first
about bootoader you don't need to relock it if you are on S-OFF
by the way why are you asking here and not in your device's thread?
Click to expand...
Click to collapse
I am s off. But beginning to think not. Bl says s off and so does getvar all.... but still need to fastboot boot.img. Device came "s off" it was a preleased HTC one x

Tmobilefan906 said:
Sorry. Nobody was answering in other
---------- Post added at 08:20 PM ---------- Previous post was at 08:16 PM ----------
I am s off. But beginning to think not. Bl says s off and so does getvar all.... but still need to fastboot boot.img. Device came "s off" it was a preleased HTC one x
Click to expand...
Click to collapse
so you are saying you flashed a custom rom and ended it up with a bootloop?

rzr86 said:
so you are saying you flashed a custom rom and ended it up with a bootloop?
---------- Post added at 10:54 PM ---------- Previous post was at 10:52 PM ----------
did you try a custom rom?
Click to expand...
Click to collapse
Yea. Had bootloop..but I went ahead and fastboot flashed boot.img. I thought the whole idea on flashing boot.img was cuz at the time rom was made, it was intendeded for s on devices.
When I bought the phones that's first thing I did was getvar all to see the specs. It came"s off" with locked bl. So I unlocked bootloader and checked getvar again and it said unlocked and s off. IDK why I had to fastboot the boot.img. Could the s off status be a lie? Lol

See attached

Tmobilefan906 said:
Yea. Had bootloop..but I went ahead and fastboot flashed boot.img. I thought the whole idea on flashing boot.img was cuz at the time rom was made, it was intendeded for s on devices.
When I bought the phones that's first thing I did was getvar all to see the specs. It came"s off" with locked bl. So I unlocked bootloader and checked getvar again and it said unlocked and s off. IDK why I had to fastboot the boot.img. Could the s off status be a lie? Lol
Click to expand...
Click to collapse
i don't think S-OFF is a lie
maybe you are using the wrong recovery for that rom

rzr86 said:
i don't think S-OFF is a lie
maybe you are using the wrong recovery for that rom
Click to expand...
Click to collapse
No. It flashed correctly.

Tmobilefan906 said:
No. It flashed correctly.
Click to expand...
Click to collapse
i can't think something else then
i assume you can boot in the rom after flashing the boot.img

rzr86 said:
i can't think something else then
i assume you can boot in the rom after flashing the boot.img
Click to expand...
Click to collapse
Yes

[Q] Unable to downgrade HBOOT/get into recovery

Hi,
My phone originally had S-OFF and root access. It is now S-On only and HBOOT is at 1.23 (long story)
I am unable to get into recovery and when I try to flash another RUU it fails. If I extract the ROM.zip from the RUU and rename it as PGA158IMG.zip it fails as "HBOOT version is too old" I've tried several different RUUs, none of them work. My attempts to just flash earlier HBOOT firmware have also failed.
When I am in HBOOT I get ***LOCKED*** and ***Security Warning *** displaying at the top of the screen
Is there another method I could try? Does anyone know of an RUU that could/should work? So far I've tried the Telstra RUU (for my phone) as well as the Europe_1.50.401 RUU
Edit: I should also mention that I can't ADB into recovery.

Haha! I fixed it!
fired a command prompt cd into platform-tools
adb reboot-bootloader and then ran an RUU from there. Hopefully this helps someone in the future.
Pack it up lads, we're done here for today.
Edit: Actually no, the update still fails.

Did you change your CID to SuperID 11111111 before? It doesn`t sound to me like that.
Otherwise there is no way back for now.
Perhaps somebody else with more knowledge has another idea

Dr. Locker said:
Did you change your CID to SuperID 11111111 before? It doesn`t sound to me like that.
Otherwise there is no way back for now.
Perhaps somebody else with more knowledge has another idea
Click to expand...
Click to collapse
I have super-CID

But when you are really S-On then you are unable to flash anything.
And with the hboot 1.23 it is till now impossible to unlock.

Dr. Locker said:
But when you are really S-On then you are unable to flash anything.
And with the hboot 1.23 it is till now impossible to unlock.
Click to expand...
Click to collapse
Ahhh well. With a bit of luck ICS will be on HBOOT 1.24 and I'll be able to update. Live and learn.

FriedPie said:
Hi,
My phone originally had S-OFF and root access. It is now S-On only and HBOOT is at 1.23 (long story)
I am unable to get into recovery and when I try to flash another RUU it fails. If I extract the ROM.zip from the RUU and rename it as PGA158IMG.zip it fails as "HBOOT version is too old" I've tried several different RUUs, none of them work. My attempts to just flash earlier HBOOT firmware have also failed.
When I am in HBOOT I get ***LOCKED*** and ***Security Warning *** displaying at the top of the screen
Is there another method I could try? Does anyone know of an RUU that could/should work? So far I've tried the Telstra RUU (for my phone) as well as the Europe_1.50.401 RUU
Edit: I should also mention that I can't ADB into recovery.
Click to expand...
Click to collapse
You need to do the procedure called XTC..
Google it.. its quiet Expensive..
I gave it to Service Centre..
Problem was solved for me./

abhishek.magaji said:
You need to do the procedure called XTC..
Google it.. its quiet Expensive..
I gave it to Service Centre..
Problem was solved for me./
Click to expand...
Click to collapse
Looks like XTC only works up to 1.18 right now. It's a shame.

I'm having the same issue but I can boot my phone, and boot into recovery and flash rooms. But RUU won't flash.. I have HBOOT 1.20

Do official HTC unlock and go from there.

Tinky1 I did that myself and yes it unlocked the bootloader, but it's still S-on with 1.20 HBOOT and won't take the official RUU roms.

HTC unlock doesn't appear to work for me.

Try superCID and report back.
frankd14321 said:
Tinky1 I did that myself and yes it unlocked the bootloader, but it's still S-on with 1.20 HBOOT and won't take the official RUU roms.
Click to expand...
Click to collapse
Sent from my HTC Sensation XE with Beats Audio Z715e using XDA App

Tinky1 I went to go to Super CID like your said but in bold red letters at the top of the page it says you must be S-OFF which I am not. I only have an Unlocked bootloader but it's still S-ON

Give it a go anyway. I'm not sure what exactly is unlocked by HTC.
Sent from my HTC Sensation Z710e using XDA App

you should still be able to fasboot supercid,
the only things you can dont with htc dev unlock is advance commands like fastboot flash

going to try now
---------- Post added at 11:58 PM ---------- Previous post was at 11:16 PM ----------
Not workng guys...
Using this:
http://forum.xda-developers.com/showthread.php?t=1192300
Step 4
I enter fastboot oem writecid 11111111
And it says error on fat, cannot find Smart_IO.CRD
I tried this:
http://forum.xda-developers.com/showthread.php?t=1192630
But when I enter dd if=/mnt/sdcard/mmcblk0p16 of=/dev/block/mmcblk0p16
It says it doesn't know what dd is.... This is while I am connected to adb but am I missing something there?

http://forum.xda-developers.com/showthread.php?t=1459369
give this a try
---------- Post added at 03:01 PM ---------- Previous post was at 03:00 PM ----------
frankd14321 said:
going to try now
---------- Post added at 11:58 PM ---------- Previous post was at 11:16 PM ----------
Not workng guys...
Using this:
http://forum.xda-developers.com/showthread.php?t=1192300
Step 4
I enter fastboot oem writecid 11111111
And it says error on fat, cannot find Smart_IO.CRD
?
Click to expand...
Click to collapse
stupid question to ask but are you in fastboot on phone when you do that?

Not a stupid question..... yes I am in fastboot when I try.
---------- Post added at 12:54 AM ---------- Previous post was at 12:35 AM ----------
I tried that Auto Super CID Script and it just says waiting for device.. I did what he said to do, and I have everything required..
---------- Post added at 12:56 AM ---------- Previous post was at 12:54 AM ----------
Ah, I put it into fastboot and the script worked but nope, same error as before when i did it manually.

I'm afraid I am probably stuck until the official RUU comes out for ICS someday..
Unless anyone else has any ideas I can try

Can't flash anything, RUU isn't working.

So, I used to be an Android expert and knew what was wrong just by the symptoms of the problem, having had an iPhone for about 4 months has changed all that. I'm still familiar with some of the stuff, fast boot, installing a recovery, mostly basic things, so I come here to the community I uses to help in.
Here's my issue: Viper ROM was installed, and I wanted to try out Rebel ROM. Downloaded it, but wouldn't connect to my computer through the ROM, so I booted to recovery to mount the internal storage.
It wouldn't flash, stating an error, tried CleanROM, same error. Now there's no OS on the phone, so I decided to RUU so I'd have something too work with.
Its on 2.20 so I downloaded that one, and program ran fine till it told me there was an error and so I can't even have a stock ROM.
TL;DR It can boot to recovery, fast boot, but can't flash a ROM or RUU. Any ideas? Thanks guys for your replies.
Sent from my Nexus 7 using Tapatalk 2

Did you try extracting the boot.IMG from the ROM, fastboot flash boot.img. if your on 1.14 Hboot you'll need to do this.
Sent from my HOX w/CM10.1 4.2.2 s-off

The error is because you didn't lock your bootloader before running the ruu fastboot oem lock

subarudroid said:
Did you try extracting the boot.IMG from the ROM, fastboot flash boot.img. if your on 1.14 Hboot you'll need to do this.
Sent from my HOX w/CM10.1 4.2.2 s-off
Click to expand...
Click to collapse
I am on hboot 1.14, can I use XsMagicals program? I'd rather use the ADB commands but I've forgotten them.

a box of kittens said:
The error is because you didn't lock your bootloader before running the ruu fastboot oem lock
Click to expand...
Click to collapse
Oh, thank you sir! I'll look up how to do that.
There's no way to downgrade the hboot, is there?

Flashing boot imgs can only be done through fastboot without s off(which I highly recommend you do) but tutorial on fastboot coming up!
---------- Post added at 10:48 PM ---------- Previous post was at 10:47 PM ----------
Flashing boot img through fastboot...
download the file in the link which above which will include adb and fastboot....put that on your computer somewhere you can find it.. now take the boot image out of the Rom zip and place it in that folder... Boot your phone into bootloader scroll down and select fastboot and now open a command prompt with in the fastbootbadb folder on your comp and type to command without the quotes "fastboot flash boot boot.img"...now go wipe in recovery and install the Rom it doesn't matter if you keep the boot img in the Rom zip or not

a box of kittens said:
Flashing boot imgs can only be done through fastboot without s off(which I highly recommend you do) but tutorial on fastboot coming up!
Click to expand...
Click to collapse
My device is S-ON, so I should S-OFF it?
And no way to downgrade the hboot? I know you can't RUU down to an earlier version because of this.

http://forum.xda-developers.com/attachment.php?attachmentid=1179735&d=1344782533 here is the download link
---------- Post added at 10:50 PM ---------- Previous post was at 10:49 PM ----------
theking_13 said:
My device is S-ON, so I should S-OFF it?
And no way to downgrade the hboot? I know you can't RUU down to an earlier version because of this.
Click to expand...
Click to collapse
Yes s off makes things 100 x easier and without s off you can't downgrade hboot through ruu

Thank you sir! With S-OFF, I can RUU back to an earlier version? I tried searching through the dev section, I mostly found ROMs, and a couple mods.

http://forum.xda-developers.com/showthread.php?t=2155071 here is our s off thread very easy after that you can flash the ruu and it will downgrade your hboot... I recokmend you flash to viper than you do s off..but I'll link you to the ruu thread in a sec
---------- Post added at 10:57 PM ---------- Previous post was at 10:55 PM ----------
http://www.androidfiles.org/ruu/?dir=Evita all the ruus... Get the att 1.85 ruu

theking_13 said:
I am on hboot 1.14, can I use XsMagicals program? I'd rather use the ADB commands but I've forgotten them.
Click to expand...
Click to collapse
Yes you can. But I'd go with what kitten says. S-off = happiness with flashing ROMs to your hearts content.
Sent from my HOX w/CM10.1 4.2.2 s-off

I keep sending the boot.img to the HOX via ADB, but when I try to install it in TWRP, I still get that same error. What am I missing here guys?

Turn off the md5 check before u flash the ROM zip
Sent from my HOX w/CM10.1 4.2.2 s-off

subarudroid said:
Turn off the md5 check before u flash the ROM zip
Sent from my HOX w/CM10.1 4.2.2 s-off
Click to expand...
Click to collapse
In the settings? Nothing is checked, and when I flash the ROM, the option that says "Zip file signature verification" is also unchecked.

Here's the error I get.
Code:
E: error in sdcard/CleanROM JL Beta 1.zip
(Status 1)
Error flashing zip 'sdcard/CleanROM JL Beta 1.zip'
Updating partition details...
[COLOR="Red"]Failed[/COLOR]

Nvm, fixed it! Thanks to both of you, couldn't have done it without your input.

[Q] Unable to get in to recovery or install CWM or TWRP

I'm trying to update a phone I haven't used for a while with a newer ROM, but I'm not able to get in to recovery to do it. It's already rooted with an old ViperOne ROM on and I thought it already had CWM on., but Flashify is telling me it has the stock recovery. I've tried installing CWM and TWRP via Flashify and Fastboot and they've completed without any errors, but I'm never able to get in to it and it boots as normal. I can't even get in to the stock recovery that's supposedly there.
Does anyone have any idea what the problem might be?
Thanks.

Well try this.
Download Rom Manager
It wil flash the CWM by itself and then reboot into the Recovery. Notice what happens.
---------- Post added at 05:08 PM ---------- Previous post was at 05:07 PM ----------
If Helped Click Thanks...

I've tried that too, still just reboots as normal.

Then it might be a Dead Recovery. Well which device are you using. And maybe Flashing your Device back to stock which would flash back the stock recovery.
Hope This Works ..!
---------- Post added at 05:14 PM ---------- Previous post was at 05:12 PM ----------
Tell me wgich device are you using.

HTC One S S4 running Android 4.0.4 ICS

mrkwtrs said:
HTC One S S4 running Android 4.0.4 ICS
Click to expand...
Click to collapse
As first step you should flash the latest JellyBean RUU which will also upgrade your bootloader to 2.15. If your phone is "S-ON" you will have to relock the bootloader before running the RUU. Once done your phone should be fully working again so you can unlock the bootloader again and flash the latest TWRP recovery.
For getting the matching RUU you need to check your CID. Connect your phone in fastboot mode, open commandline and typ:
fastboot getvar all

LS.xD said:
As first step you should flash the latest JellyBean RUU which will also upgrade your bootloader to 2.15. If your phone is "S-ON" you will have to relock the bootloader before running the RUU. Once done your phone should be fully working again so you can unlock the bootloader again and flash the latest TWRP recovery.
For getting the matching RUU you need to check your CID. Connect your phone in fastboot mode, open commandline and typ:
fastboot getvar all
Click to expand...
Click to collapse
OK, Bootloader relocked, back to S-On, CID reset to O2___001.
Would you agree that the RUU is the 7th one down in this list?

mrkwtrs said:
OK, Bootloader relocked, back to S-On, CID reset to O2___001.
Would you agree that the RUU is the 7th one down in this list?
Click to expand...
Click to collapse
NO! You were S-OFF? That made life easier. Unbranded EU firmware is fine BUT I suppose you cant flash it now, as you reverted the CID...
I said, IF you're S-ON...
Best way is get S-OFF again via rumrunner.us, change CID to HTC__001 and then flash the RUU you mentioned before

LS.xD said:
NO! You were S-OFF? That made life easier. Unbranded EU firmware is fine BUT I suppose you cant flash it now, as you reverted the CID...
I said, IF you're S-ON...
Best way is get S-OFF again via rumrunner.us, change CID to HTC__001 and then flash the RUU you mentioned before
Click to expand...
Click to collapse
Just seen an O2 UK RUU further down the list so I'll try that.

mrkwtrs said:
Just seen an O2 UK RUU further down the list so I'll try that.
Click to expand...
Click to collapse
Ok, give it a try, you should go S-OFF anyway as you need HBOOT 2.15 if you want to use roms newer than ICS.

LS.xD said:
Ok, give it a try, you should go S-OFF anyway as you need HBOOT 2.15 if you want to use roms newer than ICS.
Click to expand...
Click to collapse
Think I'm all sorted. Thanks for your help! :good:

Remove TAMPERED, return to stock with RUU M4_UL_K44_SENSE60_MR_HTC_Europe_4.09.401.3

Hi guys.
I want to share with you how i returned to 100% stock after been S-OFF with unlocked bootloader and custom rom. I tried everything i found for doing this, but i always get TAMPERED at the end after switching to S-ON. If you stay S-OFF there is no TAMPERED flag.
What finally helped was that i found a RUU 4.09.401.3. With the custom rooted rom and revone you can easy lock the bootloader and S-ON. After that you just need to flash the RUU and everything is stock, without any trace from been other way.
This is where i found the RUU, i think it will be very usefull for many people here:
http://4pda.ru/forum/index.php?showtopic=497566
And the direct link to the RUU:
https://mega.co.nz/#!fAwHGRzZ!z64RAMDuv9_rKUlGGA0vrVQc6k6ap4uKTwbfU0TjEHA
Big thanks to Beast78 and 666SATAN666 that made this RUU available for us.

Hi, sorry to bother you but I have been looking for ever for the European RUU. The direct link you provided does not work. Do you by any chance still have the RUU and can upload it somewhere?
Thank you !

therealsebo said:
Hi, sorry to bother you but I have been looking for ever for the European RUU. The direct link you provided does not work. Do you by any chance still have the RUU and can upload it somewhere?
Thank you !
Click to expand...
Click to collapse
I have updated the link. :good:

That's the Cingular US version
---------- Post added at 09:43 AM ---------- Previous post was at 09:27 AM ----------
And there is one more link in that thread and it's for a RAR, RUU M4_UL_K44_SENSE60_MR_HTC_Europe_4.09.401.3.rar, not EXE. This is why I was asking if you maybe have saved the RUU because I was not able to find it in the linked thread as well.

therealsebo said:
That's the Cingular US version
---------- Post added at 09:43 AM ---------- Previous post was at 09:27 AM ----------
And there is one more link in that thread and it's for a RAR, RUU M4_UL_K44_SENSE60_MR_HTC_Europe_4.09.401.3.rar, not EXE. This is why I was asking if you maybe have saved the RUU because I was not able to find it in the linked thread as well.
Click to expand...
Click to collapse
My mistake, sorry. Corrected.

Now it's the link to the RAR that I was mentioning, not the RUU

therealsebo said:
Now it's the link to the RAR that I was mentioning, not the RUU
Click to expand...
Click to collapse
Inside the RAR is the folder with RUU files.

Russia ain't my strongest language, and Google translate gives a bit wonky results. Could someone post a quick how-to?
Sent from my HTC One mini using Tapatalk

Aciz said:
Russia ain't my strongest language, and Google translate gives a bit wonky results. Could someone post a quick how-to?
Sent from my HTC One mini using Tapatalk
Click to expand...
Click to collapse
This is from this thread: http://forum.xda-developers.com/showthread.php?t=2358738
You have to be rooted and S-off:
------------------------------------------------------------------------------------------------------------------
Push revone to your device:
Put the downloaded revone file in your adb/fastboot folder and push it using this command:
Code:
adb push revone /data/local/tmp/
open a adb shell by typing:
Code:
adb shell
Now change to that directory:
Code:
cd /data/local/tmp
Now set permissions
Code:
chmod 755 revone
Now re-lock the bootloader:
Code:
./revone -l
Remove Tampered flag:
Code:
./revone -t
The newer revisions of revone don't do the actual locking any longer but it should output the command you need to run to fully re-lock:
Type exit to exit the adb shell session and issue the command to re-lock the device:
Code:
fastboot oem writesecureflag 3
Now verify that it worked by booting into the bootloader:
Code:
adb reboot bootloader
------------------------------------------------------------------------------------------------------------------
Then flash the ruu from the link in my first post: https://mega.co.nz/#!fAwHGRzZ!z64RAMDuv9_rKUlGGA0vrVQc6k6ap4uKTwbfU0TjEHA

any idea why it´s not working on windows 10 ?

The link has been removed again. Could you please re upload? I need it to restore my girlfriends phone to stock and can not find it anywhere else. Thanks

mauley said:
The link has been removed again. Could you please re upload? I need it to restore my girlfriends phone to stock and can not find it anywhere else. Thanks
Click to expand...
Click to collapse
If you still need the file, here's an alternative link:
https://cloud.mail.ru/public/57yQ/Miuz2vM2S
Regards,
S.

soreilly said:
If you still need the file, here's an alternative link:
https://cloud.mail.ru/public/57yQ/Miuz2vM2S
Regards,
S.
Click to expand...
Click to collapse
Thanks a lot, I was desperate to find this file.

r5_alpine said:
Hi guys.
I want to share with you how i returned to 100% stock after been S-OFF with unlocked bootloader and custom rom. I tried everything i found for doing this, but i always get TAMPERED at the end after switching to S-ON. If you stay S-OFF there is no TAMPERED flag.
What finally helped was that i found a RUU 4.09.401.3. With the custom rooted rom and revone you can easy lock the bootloader and S-ON. After that you just need to flash the RUU and everything is stock, without any trace from been other way.
This is where i found the RUU, i think it will be very usefull for many people here:
Click to expand...
Click to collapse
Sorry, my question is rather: can you use this if you're on 4.14.401.2 and S-ON? and if yes how?

***BUMP***

Unfortunately, I could not install that RUU, It ends with a connection error [170], can anyone help me to get it working ?

If you have not resolved
m0rgul said:
Unfortunately, I could not install that RUU, It ends with a connection error [170], can anyone help me to get it working ?
Click to expand...
Click to collapse
PUTTING IN TEST `FASTBOOT Connect HTC One to your computer using the USB cable. Shut down the computer and turn it on while pressing the button to lower the volume. You will see the menu boot loader HTC One. With the volume buttons, move to the Fastboot option and select it with the power button.