[Q] Htc One S Bricked? - HTC One S

Hi I recently tried installing MagioRom and now my phone wont boot. The last working rom I had was MaximusHD 10.0.0. I am S-off, H-Boot 2.15, and T-MOB010 and i have a U.S. Tmobile Htc One S I have tried restoring from several of my nandroids, inncluding my stock nandroid. I've tried several different RUU's (all Tmous), installed many different Roms, but the same thing always happens. The phone will go through the boot process but then freeze at the lock screen, showing only the status bar. After about 15-20 seconds it crashes and reboots. I've tried everything I can think of. Does anyone know how I can fix this? Thanks in advance.

Go back to MaximusHD, this is the only ROM where your new firmware which you flashed will work. None of your nandroid backups will work unless you downgrade your firmware

I tired MaximusHD
usaff22 said:
Go back to MaximusHD, this is the only ROM where your new firmware which you flashed will work. None of your nandroid backups will work unless you downgrade your firmware
Click to expand...
Click to collapse
Thanks for your help but I tried re-flashing MaximusHD, but no luck.It has the same problems as the other ROMs. The aroma installer will work fine and then the phone will boot and it will go through the full boot logo and then the status bar will come up and I can see battery and time, but the rest of the screen is dark. My radio is 1.13.50.05.31 if that makes any difference, I haven't been able to update it.
I see what I forgot do now. I didn't flash the firmware.zip, weird that the ROM worked anyway. I'll download and flash that and let you know if that fixes everything.
So even after trying the firmware.zip and yoouri instructions to install maximus HD it still wont boot. Im now hboot 1.16 and radio 1.20 Im still S-off and Cid is still T-MOB010

xiheartjtag said:
Thanks for your help but I tried re-flashing MaximusHD, but no luck.It has the same problems as the other ROMs. The aroma installer will work fine and then the phone will boot and it will go through the full boot logo and then the status bar will come up and I can see battery and time, but the rest of the screen is dark. My radio is 1.13.50.05.31 if that makes any difference, I haven't been able to update it.
I see what I forgot do now. I didn't flash the firmware.zip, weird that the ROM worked anyway. I'll download and flash that and let you know if that fixes everything.
So even after trying the firmware.zip and yoouri instructions to install maximus HD it still wont boot. Im now hboot 1.16 and radio 1.20 Im still S-off and Cid is still T-MOB010
Click to expand...
Click to collapse
So you could fastboot flash the boot.img and see if that enables your phone to boot.
Then once booted, move the ROM.zip to your phone and reinstall ROM in recovery. (as per instructions) Or sideload the rom in TWRP so that you can reinstall the rom.

Still no luck
tivofool said:
So you could fastboot flash the boot.img and see if that enables your phone to boot.
Then once booted, move the ROM.zip to your phone and reinstall ROM in recovery. (as per instructions) Or sideload the rom in TWRP so that you can reinstall the rom.
Click to expand...
Click to collapse
After flashing the boot.img It gets stuck at white htc screen, but it did go through android is upgrading. After a few seconds it goes dark but the htc is still visible then it says very faintly process system inst responding and then do you want to close it. Then it reboots again.I cant get the phone to boot. Ive tried side loading and pushing the rom and the aroma install works fine, but it wont boot. Is there anyway I can completey go back to stock. I have nandroids, but they don't work and neither do RUU's

Logcat
http://pastebin.com/fRHezgpE heres a logcat if that helps

xiheartjtag said:
After flashing the boot.img It gets stuck at white htc screen, but it did go through android is upgrading. After a few seconds it goes dark but the htc is still visible then it says very faintly process system inst responding and then do you want to close it. Then it reboots again.I cant get the phone to boot. Ive tried side loading and pushing the rom and the aroma install works fine, but it wont boot. Is there anyway I can completey go back to stock. I have nandroids, but they don't work and neither do RUU's
Click to expand...
Click to collapse
yes, I posted a couple ways
http://forum.xda-developers.com/showthread.php?t=2480278
I've done the second way, but you may notice luxandroid installed old firmware before running the RUU.

Thanks but
tivofool said:
yes, I posted a couple ways
http://forum.xda-developers.com/showthread.php?t=2480278
I've done the second way, but you may notice luxandroid installed old firmware before running the RUU.
Click to expand...
Click to collapse
I followed this guide and the phone booted again turned out the Rcdata was messed up somehow.
http://forum.xda-developers.com/showpost.php?p=46308487

Related

Semi-bricked, ICS RUU issues

Last night I flashed the gingerbread coredroid ROM and it worked fine. I just didn't really like the looks of some things, so I thought I'd change to a different ROM.
I thought about flashing the ICS Insertcoin ROM, so I flashed it, and it kept trying to boot, but turned off and kept repeating. But then I read that I was supposed to update the firmware, so I took out the SIM card and connected it to the computer and copied the 3.24 RUU to the SD card.
I followed the instructions and the RUU set up properly through HBoot the first time. Then i went in to recovery to wipe data. It had to reboot the phone before I did anything else, and it went back into HBOOT and tried to install the RUU again, but this time it failed due to CID being incorrect! I didn't give it a second thought, but then the insertcoin ROM was doing the same thing, going through the boot up images and shutting off right in the middle, and repeating.
I tried another ICS ROM, Android Revolution, and same result. Failed booting. Then I tried restoring my nandroid backup from before coredroid, and it also kept trying to boot and then shut down. Then I tried coredroid again, and it had the same reaction, failed booting! I redownloaded the ICS RUU 4 times and repeated this process 4 different times, even with other GB versions of insertcoin and ARHD, and no dice!
I'm not entirely tech savvy, so maybe there is soemthing I havent covered yet. Now the RUU fails not because of CID, but because of incorrect Model ID. I read about goldcards, but I can't make a new one because the phone won't even boot! Please help me!
edit: as of now, the phone does not turn on to any rom or homescreen, ONLY Hboot and recovery.
Hello Jagerlowe,
The 3.24 RUU installs fully with 2 Boots into Bootloader, so there is nothing to be worried about. Here's how you could solve your problem.
1. Please follow step 4 from this Guide to obtain SuperCID, make sure that the SuperCID is 11111111! Mismatch of the SUPERCID causes the Error you were previously facing.
2. With the updated SuperCID, reinstall the latest ARHD 6.2.1 ROM.
3. Boot & flash the suggested radio if you are using the ARHD ROM.
You should be alright
Please keep me posted about your problem and hope it helped!
Remember to Thank me!
CursedBat said:
Hello Jagerlowe,
The 3.24 RUU installs fully with 2 Boots into Bootloader, so there is nothing to be worried about. Here's how you could solve your problem.
1. Please follow step 4 from this Guide to obtain SuperCID, make sure that the SuperCID is 11111111! Mismatch of the SUPERCID causes the Error you were previously facing.
2. With the updated SuperCID, reinstall the latest ARHD 6.2.1 ROM.
3. Boot & flash the suggested radio if you are using the ARHD ROM.
You should be alright
Please keep me posted about your problem and hope it helped!
Remember to Thank me!
Click to expand...
Click to collapse
I can't quite do that because the phone doesn't turn on. It goes to the boot screen then shuts off. Then turns on, boot screen, off again. So I can't connect it to the computer or do anything like that.
This thread might help you... ICS flashing is little bit different than GB...
http://forum.xda-developers.com/showthread.php?t=1459767
Sent from my HTC Sensation 4G with Beats
Jagerlowe said:
I can't quite do that because the phone doesn't turn on. It goes to the boot screen then shuts off. Then turns on, boot screen, off again. So I can't connect it to the computer or do anything like that.
Click to expand...
Click to collapse
Can you boot your device into Recovery mode?
Jagerlowe said:
Last night I flashed the gingerbread coredroid ROM and it worked fine. I just didn't really like the looks of some things, so I thought I'd change to a different ROM.
I thought about flashing the ICS Insertcoin ROM, so I flashed it, and it kept trying to boot, but turned off and kept repeating. But then I read that I was supposed to update the firmware, so I took out the SIM card and connected it to the computer and copied the 3.24 RUU to the SD card.
I followed the instructions and the RUU set up properly through HBoot the first time. Then i went in to recovery to wipe data. It had to reboot the phone before I did anything else, and it went back into HBOOT and tried to install the RUU again, but this time it failed due to CID being incorrect! I didn't give it a second thought, but then the insertcoin ROM was doing the same thing, going through the boot up images and shutting off right in the middle, and repeating.
I tried another ICS ROM, Android Revolution, and same result. Failed booting. Then I tried restoring my nandroid backup from before coredroid, and it also kept trying to boot and then shut down. Then I tried coredroid again, and it had the same reaction, failed booting! I redownloaded the ICS RUU 4 times and repeated this process 4 different times, even with other GB versions of insertcoin and ARHD, and no dice!
I'm not entirely tech savvy, so maybe there is soemthing I havent covered yet. Now the RUU fails not because of CID, but because of incorrect Model ID. I read about goldcards, but I can't make a new one because the phone won't even boot! Please help me!
edit: as of now, the phone does not turn on to any rom or homescreen, ONLY Hboot and recovery.
Click to expand...
Click to collapse
did you solve this because i think im having the same issue as you
Mookie_Jones said:
did you solve this because i think im having the same issue as you
Click to expand...
Click to collapse
Can you boot your device into Recovery mode?
CursedBat said:
Can you boot your device into Recovery mode?
Click to expand...
Click to collapse
Yes, I can boot it into recovery and HBOOT, thats it.
Jagerlowe said:
Yes, I can boot it into recovery and HBOOT, thats it.
Click to expand...
Click to collapse
What I am about to guide you through is downgrading your HBoot.
Firstly, download 1.17RUU - CHOOSE WHICH Service Provider, Location (CHOOSE THE RIGHT ONE)
http://forum.xda-developers.com/showthread.php?t=1459767
1. Boot into recovery mode and connect your phone to your computer.
2. Select "mounts and storage"
3. Then select mount sd card.
4. Copy the PG58IMG.zip into the Root of your SD Card.
5. Reboot your phone into bootloader again.
Your phone should automatically prompt you to begin update. After the update,
Your Bootloader should be downgraded. Then Flash a simple - any Gingerbread based ROM, and follow my post on doing SuperCID
Goodluck! Cheers
CursedBat said:
What I am about to guide you through is downgrading your HBoot.
Firstly, download 1.17RUU - CHOOSE WHICH Service Provider, Location (CHOOSE THE RIGHT ONE)
http://forum.xda-developers.com/showthread.php?t=1459767
1. Boot into recovery mode and connect your phone to your computer.
2. Select "mounts and storage"
3. Then select mount sd card.
4. Copy the PG58IMG.zip into the Root of your SD Card.
5. Reboot your phone into bootloader again.
Your phone should automatically prompt you to begin update. After the update,
Your Bootloader should be downgraded. Then Flash a simple - any Gingerbread based ROM, and follow my post on doing SuperCID
Goodluck! Cheers
Click to expand...
Click to collapse
Oh my gosh! Can I like marry you!? You fixed my problem! Thank you so much!
Jagerlowe said:
Oh my gosh! Can I like marry you!? You fixed my problem! Thank you so much!
Click to expand...
Click to collapse
You're welcome I'm just glad to be of any use.
Good luck experimenting with ICS
Cheers!

htc one s brik problem [SOLVED]

Hi i have a big problem with my new htc one s
i follow all instructions: clear data, factory reset, install rom, then install boot.img
Roms boot until it shows wallpaper and top toolbar with the battery icon and time, then can read preparing phone storage.... and an error appears asking me to wait or close system process
The rom restarts and stucks at this point dont know what else do, i try installing stock recovery and clear data factory reset and try install with 3 versions of recovery whith same result, have tried some different roms and its the same.
Wonder if anyone knows what i have to do solve this..
Thankyou in advance.
--------------------------
solution on post #7
Moved To Q&A​
This is a development section, its not the place for questions.​
Which roms did you try to flash? Did you flash the correct boot.img
Sent from my HTC One S using XDA
thanks for your answer
Yes i flash [ROM][ICS] |June 13th| Energy™ -.¸¸.·´¯ Blue with the boot.img from the downloads
and [ROM] Ir2 1.78.401.2 - HTC One S Stock ROM DUO [Deodexed-Updated-Optimised]
When finish flasing from recovery reboot on fastboot and flash the boot.img and always is the same result.
I've tried to change to stock version of recovery and wipe all, reset to factory default then flash custom recovery and start the process but is the same.
when i whipe from stock or custom version of recovery there isn't any error message.
thankyou very much.
you don't flash the boot.img from recovery--read OP
boot.img
I flash it from fastboot not installing a zip from recovery. I also try installing by script like on [ROM][ICS] |June 14th| Energy™ -.¸¸.·´¯ Blue that there is an script that makes the installation always from fastboot
[solved]
Hi, find a way to make my htc one s woking again
This is the solution:
first i've to change my CID because my phone is from ORANGE spain and cannot flash a official RUU.
for this i follow this tutorial
http://forum.xda-developers.com/showthread.php?p=26516911#post26516911
Second flash stock recovery and lock boot
finally i've downloaded the last europe RUU, and execute it.The process works like a charm and in 15 or 20 minutes my one s was working again.
Now i have lock boot, stock recovery and unrooted phone and have one question:
for root my phone again have to unlock and flash a custom recovery, and then.....
should I need to put back again stock recovery and lock boot for working an official RUU?? or can work without problems with unloked boot an custom recovery?
Thanks in advance.
Hey I have the exact same issue but running RUU didnt solve it. I have the US Tmobile Htc one s, S-off, supercid, hboot 1.14. I could load custom roms and mount usb storage only through recovery. my sd card does not show in fastboot. However, my phone never completely boots. It goes all the way to the lockscreen, allows me to pull the ring, then gets stuck on preparing phone storage. Flashing RUU does the same.
can anyone help?
joemanbui said:
Hey I have the exact same issue but running RUU didnt solve it. I have the US Tmobile Htc one s, S-off, supercid, hboot 1.14. I could load custom roms and mount usb storage only through recovery. my sd card does not show in fastboot. However, my phone never completely boots. It goes all the way to the lockscreen, allows me to pull the ring, then gets stuck on preparing phone storage. Flashing RUU does the same.
can anyone help?
Click to expand...
Click to collapse
i too have same prob tried all kinds of ruu's. been trying for 14 hours if you find soething please report how you did it
I have the same problem any ideas?
anyone know of any gurus in the forum knows how to fix
I've been trying for a month
any rom to put loads and after a 10-20sec reset
For you with sd-card problems, have you tried to flash stock recovery and then boot to bootloader and choose clear storage? It worked for me.
If you installed a RUU, ofcourse you already have stock recovery.
Sent from my One S using Tapatalk 4 Beta
I have the same problem, and decided to work on it today... I can say frustratingly i've not had ANY success in getting past the screen that pops up with the lock ring on the bottom...I've tried RUUs , the clear storage ... what is going on... I'm S-off as well so i really don't get why this would happen.
One S (s4)
twrp 2.5
S-on
T-mobile US
CM10.2
kernel 3.4
Hboot 2.15
openDsp v31.1.0.45.0815
current raido :1.11.50.05.28_10.27.50.08L
using the getvar method
i get this
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__203
using fastboot getvar version-main
Version-main : ( BLANK)
Click to expand...
Click to collapse
after following the steps for s-off it worked
the bootloader shows VLE PVT SHIP -S-OFF RL
CID-11111111
right after i followed the last step of the face palm method which was
boot into android and issue the 3 commands
adb push soffbin3 /data/local/tmp/
adb shell chmod 744 /data/local/tmp/soffbin3
adb shell su -c "/data/local/tmp/soffbin3"
Click to expand...
Click to collapse
i went into the bootloader confirmed everything then wen back to CM and it woudnt load
so i wiped everything and flashed a new version and an older 10.1 stable version which didnt work either
it would just freeze at the loading screen and restart
so i tried wiping everything and flash a stock RUU from HTC (t-mobile) 4.1.1
everything went off without a hitch
went to bootloader which showed a new version of the radio
tried to boot it up
and it did boot up but i coudnt go any further it just keeps saying
Preparing phone storage
then restarts
i tried wipe/data factory reset but it says cant mount SDCARD even though TWRP has no problem with wiping it
I have the same problem..
qwerty warrior said:
after following the steps for s-off it worked
the bootloader shows VLE PVT SHIP -S-OFF RL
CID-11111111
right after i followed the last step of the face palm method which was
i went into the bootloader confirmed everything then wen back to CM and it woudnt load
so i wiped everything and flashed a new version and an older 10.1 stable version which didnt work either
it would just freeze at the loading screen and restart
so i tried wiping everything and flash a stock RUU from HTC (t-mobile) 4.1.1
everything went off without a hitch
went to bootloader which showed a new version of the radio
tried to boot it up
and it did boot up but i coudnt go any further it just keeps saying
Preparing phone storage
then restarts
i tried wipe/data factory reset but it says cant mount SDCARD even though TWRP has no problem with wiping it
Click to expand...
Click to collapse
I have the exact same problem did you ever figure out a way of fixing it?
qwerty warrior said:
i went into the bootloader confirmed everything then wen back to CM and it woudnt load
so i wiped everything and flashed a new version and an older 10.1 stable version which didnt work either
it would just freeze at the loading screen and restart
so i tried wiping everything and flash a stock RUU from HTC (t-mobile) 4.1.1
everything went off without a hitch
went to bootloader which showed a new version of the radio
tried to boot it up
and it did boot up but i coudnt go any further it just keeps saying
Preparing phone storage
then restarts
i tried wipe/data factory reset but it says cant mount SDCARD even though TWRP has no problem with wiping it
Click to expand...
Click to collapse
exact same problem except i didnt flash a custom rom. i flashed a radio following this http://forum.xda-developers.com/showthread.php?t=1998270 ( i did everything that I was instructed to do in this page) then my wifi didnt work so i reflash the RUU. now im stuck in preparing storage which then lead to bootloop
found the solution
Originally Posted by muriani View Post
well, as a last resort, i set cid to t-mob010 (stock for my phone), ran the latest ruu for t-mobile, and same result.
I've given it up for lost.
Edit: Holy f*ckballs.
So, i didn't give up after all. Found a couple of other threads, and apparently yes, you have to relock, reset cid, and go s-on (fastboot oem writesecureflag 3) and then run the ruu.
I have a stock fresh tmous 4.1.1 one s now.
xxgummyxx said:
exact same problem except i didnt flash a custom rom. i flashed a radio following this http://forum.xda-developers.com/showthread.php?t=1998270 ( i did everything that I was instructed to do in this page) then my wifi didnt work so i reflash the RUU. now im stuck in preparing storage which then lead to bootloop
found the solution
Originally Posted by muriani View Post
well, as a last resort, i set cid to t-mob010 (stock for my phone), ran the latest ruu for t-mobile, and same result.
I've given it up for lost.
Edit: Holy f*ckballs.
So, i didn't give up after all. Found a couple of other threads, and apparently yes, you have to relock, reset cid, and go s-on (fastboot oem writesecureflag 3) and then run the ruu.
I have a stock fresh tmous 4.1.1 one s now.
Click to expand...
Click to collapse
thank you thanks !!!!!!! two days without finding the solution and in the last paragraph that I will write opened the sky, put it in s-on, Greetings
dosariland said:
thank you thanks !!!!!!! two days without finding the solution and in the last paragraph that I will write opened the sky, put it in s-on, Greetings
Click to expand...
Click to collapse
For about some days, I flash an RUU when I was still s-off and boot-unlocked, then I flash twrp-recovery, make the adb thinks with mmcblk* (dd flash) and flash again a RUU. As you can read here.
But same boot loop problem with "Preparing Phone Storage...".
Because dd flash (the mmcblk* file) under linux and with startet recovery did not solve my bootloop / prepairing sd card problem (I had still access to my sd card with twrp-recovery! All the time!) I really think about to enable s-on
I am only scared when I do:
fastboot oem writesecureflag 3
Click to expand...
Click to collapse
How can I re-enable s-off if my os still hangs on "Preparing Phone Storage" after putting s-on and try to flash an ruu to fix my bootloop/Preparing Phone Storage problem?
I did my s-off with rumrunner.
Would be very thankfull about help.
Greetings by I_did_it_just_tmrrow
you have to relock, reset cid, and go s-on (fastboot oem writesecureflag 3) and then run the ruu.
Click to expand...
Click to collapse
THX!!!
I leave superCID and it works! I hope my signal would be fine under stock.
THX a lot!
Greetings by I_did_it_just_tmrrow

Sensation stuck on white logo screen

HELP!!
I am new to rooting, and tried to root my phone using a guide on this forum. I got my head around bits of it but im confused now and seriously need help. I successfully unlocked the bootloader screen and when I hit recover I can access clockworkmod fine. But when I try to flash the firmware by placing the PG58img.zip on the SD card, it tries to run it but says "wrong image", "no image", then stays on parsing for a while. If I restart the device it just stays on the white HTC screen. What have I done.
I am unsure what version kernel I should be trying, (tried a few, they all stay on parsing), and I could use a good ROM too.
its a pyramid pvt ship s-on rl
hboot-1.27
I really need some help and Id much appreciate it
iwkya said:
HELP!!
I am new to rooting, and tried to root my phone using a guide on this forum. I got my head around bits of it but im confused now and seriously need help. I successfully unlocked the bootloader screen and when I hit recover I can access clockworkmod fine. But when I try to flash the firmware by placing the PG58img.zip on the SD card, it tries to run it but says "wrong image", "no image", then stays on parsing for a while. If I restart the device it just stays on the white HTC screen. What have I done.
I am unsure what version kernel I should be trying, (tried a few, they all stay on parsing), and I could use a good ROM too.
its a pyramid pvt ship s-on rl
hboot-1.27
I really need some help and Id much appreciate it
Click to expand...
Click to collapse
Follow the below guide to letter to get a working rom
http://forum.xda-developers.com/showthread.php?p=25587345
Sent from my pyramid.. Through blazing fast sonic waves
ganeshp said:
Follow the below guide to letter to get a working rom
http://forum.xda-developers.com/showthread.php?p=25587345
Sent from my pyramid.. Through blazing fast sonic waves
Click to expand...
Click to collapse
Thanks man, I shall follow it exactly and let you know how it goes. Lost without my phone.
problems
Ok so I have tried it to the letter, few issues though..
Since I have no working rom running, I cannot "enable usb debugging" in order to install the 4ext recovery. I got around this but doing this in the bootloader instead - is this ok ?
4ext seemed to work, and i have followed it to the letter, super wipe installed great, then I installed revolution rom which went well, choosing to install a stock kernal. However after reboot - still a white HTC screen
The only thing I can think of is that my firmware is wrong. Since I cannot get into settings (as i have no rom) and can only access bootloader and now 4ext, I cannot see its version - if there is a way can you help please
I need 3.32 but don't know if i have it or not as I have played around with it that much (my own fault i know )
Is there any way to see the version i have and install 3.32 firmware in 4ext or bootloader. Everytime I have tried in the past by copying it to the sd card, it gives me the parsing message and no image wrong image..grrr
Thanks greatly man
iwkya said:
Ok so I have tried it to the letter, few issues though..
Since I have no working rom running, I cannot "enable usb debugging" in order to install the 4ext recovery. I got around this but doing this in the bootloader instead - is this ok ?
4ext seemed to work, and i have followed it to the letter, super wipe installed great, then I installed revolution rom which went well, choosing to install a stock kernal. However after reboot - still a white HTC screen
The only thing I can think of is that my firmware is wrong. Since I cannot get into settings (as i have no rom) and can only access bootloader and now 4ext, I cannot see its version - if there is a way can you help please
I need 3.32 but don't know if i have it or not as I have played around with it that much (my own fault i know )
Is there any way to see the version i have and install 3.32 firmware in 4ext or bootloader. Everytime I have tried in the past by copying it to the sd card, it gives me the parsing message and no image wrong image..grrr
Thanks greatly man
Click to expand...
Click to collapse
4EXT flashed fine ..thats no probs there ..and you did the right thing (adb reboot-bootloader is to get to fastboot ..which you can do it manually too)
did you enabled the smartflash ?? ---> THIS is the main step
did you check the md5 of the ROM ? (you can do it via 4EXT itself - its in install form sdcard-> check md5 i think) and verify it aganist the md5sum given in ARHD thread (in general just below the download link)
also flash the rom again ..no wipe this time ..just flash it
can you post the complete HBOOT details ? seeing that i can give you the proper suggestion (afaik if you are on ICS earlier ..you have correct firmware)
I have performed the md5 check and it was ok. Im thinking that after 4ext rebooted after the superwipe, I didn't re-enable smart flash (forgot it needs to be done again), so I just enabled it and am reinstalling the ROM with no superwipe this time..
My hboot is 1.27 so i must have 3.32..
I really do appreciate this, sorry im a n00b
Finished flashing rom, reboot and same again. White HTC screen. I really am lost now
This is what my screen says in bootloader
unlocked
pyramid pvt ship s-on rl
hboot-1.27.0000
radio-11.22.3504.07_m
openADSP-v02.6.0.2226.00.0131
eMMC-boot
iwkya said:
I have performed the md5 check and it was ok. Im thinking that after 4ext rebooted after the superwipe, I didn't re-enable smart flash (forgot it needs to be done again), so I just enabled it and am reinstalling the ROM with no superwipe this time..
My hboot is 1.27 so i must have 3.32..
I really do appreciate this, sorry im a n00b
Finished flashing rom, reboot and same again. White HTC screen. I really am lost now
Click to expand...
Click to collapse
EDIT: you got correct firmware no need to flash it again
dude the smart flash is said temporary for a reason ..you need to enable it every time ..when ever you enter the recovery ..until you make the smartflash permanent by following step 5 (which can be done only when you have a bootlable, rooted rom )
Yea im guessing the firmware is ok, the 4ext is great, superwipe works fine, the rom installs complete. When reboot, it just stays ont he white screen
Really annoying now since i have no phone and cannot seem to find anything else on it.
iwkya said:
Yea im guessing the firmware is ok, the 4ext is great, superwipe works fine, the rom installs complete. When reboot, it just stays ont he white screen
Really annoying now since i have no phone and cannot seem to find anything else on it.
Click to expand...
Click to collapse
you enabled smartflash just before flashing the rom ?
and still stuck there ?
ok do the extra1 step mentioned in the guide (skip the adb steps again ..and do only fastboot steps)
I feel you
iwkya said:
Yea im guessing the firmware is ok, the 4ext is great, superwipe works fine, the rom installs complete. When reboot, it just stays ont he white screen
Really annoying now since i have no phone and cannot seem to find anything else on it.
Click to expand...
Click to collapse
I can really understand your annoyance I have experienced the exact same problem to the letter. After several attempts to reach out No One seemed to help or understand my problem. I then went back to my HD2 and now have the HOX as my main unit.
I get stuck on the white logo screen or beats screen everytime I flash a ROM. I tried everything at least I think so.
mitchelleersel said:
I can really understand your annoyance I have experienced the exact same problem to the letter. After several attempts to reach out No One seemed to help or understand my problem. I then went back to my HD2 and now have the HOX as my main unit.
I get stuck on the white logo screen or beats screen everytime I flash a ROM. I tried everything at least I think so.
Click to expand...
Click to collapse
all your threads are before i joined XDA
Yea, im well pissed off. I have done everything, yes I enabled smartflash and installed the rom again, done that a few times now. Ran superwipe a few times, nothing.....
going to re image the recovery and try it all again.
if that doesnt work, its in the bin..
iwkya said:
Yea, im well pissed off. I have done everything, yes I enabled smartflash and installed the rom again, done that a few times now. Ran superwipe a few times, nothing.....
going to re image the recovery and try it all again.
if that doesnt work, its in the bin..
Click to expand...
Click to collapse
you keep on doing superwipe ..it wipes everything
just do it once ..only once
then enable smartflash
then flash the rom
if it still stuck
then do the extar 1 step in the guide (you need to get the boot.img of the kernel you have chosen while installing the AHD rom earlier)
thats all follow that once and reply me back if it didnt worked
(no extra steps)
ok done it again, same thing happens.
Now.. you are referring to an extra step regarding the boot image. It isnt clear in the guide. Where do I get the boot image from, and how and when do I apply it.
?
iwkya said:
ok done it again, same thing happens.
Now.. you are referring to an extra step regarding the boot image. It isnt clear in the guide. Where do I get the boot image from, and how and when do I apply it.
?
Click to expand...
Click to collapse
Usually the fitting boot.img can be found inside the .zip of your desired Rom.
Finding your "boot.img"
Open your rom's zip file
Open the "kernels" folder
Open the folder of the kernel you chose during install of your rom (if there are any choices)
Extract the "boot.img" to C:\Android (or wherever your adb and fastboot are located)
Click to expand...
Click to collapse
he does say how to find it right?
the zip in your case is ARHD 6.6.7 rom zip file
and you are asking again for how and when ..when he clearly explained the steps on how to do it
and i already told you when to apply it
ohh btw skip the adb steps ..you can go to bootloader manually and do the fastboot commands
ok, so i got somewhere
I found a boot.img in the rom/kernals
then i used fastboot flash boot boot.img
this flashed the img
now when i reboot i get off the htc screen and im stuck on the beats audio screen -- oo while I been typing its come off the beast screen and booted into android yey.. Thank you every so much man. I kinda understand this a little more too thanks to you and the guide.
I shall post when I have problems with this rom (notice i said when)
Thank you..
iwkya said:
ok, so i got somewhere
I found a boot.img in the rom/kernals
then i used fastboot flash boot boot.img
this flashed the img
now when i reboot i get off the htc screen and im stuck on the beats audio screen -- oo while I been typing its come off the beast screen and booted into android yey.. Thank you every so much man. I kinda understand this a little more too thanks to you and the guide.
I shall post when I have problems with this rom (notice i said when)
Thank you..
Click to expand...
Click to collapse
thanks you do it but hitting the thanks button to useful posts (that's how xda kept it )
I am still stuck at boot screen
Hey I tried to do everything my guy here did and still no luck.
the last thing I tried was flashing latest firmware package without the HBOOT, then flashed the newest recovery, then performed a superwipe because latest rom differed from ARHD, then flashed the ROM and then the Boot.img just to be sure (even though this should not be necessary according to the firmware)
How can I figure out whats wrong?

[Q] Can't get past CWM.. HELP!?

OK.. here is the deal: HTC One S, T-MO, flashed recovery (TWRP), NO ROM would work in the WiFi dept. I tried flashing the radio and no matter what I couldnt get it to flash the 1.5 or 1.84 radio. TWRP would take forever and say it was complete, but the radio version still said 1.04 (or something) in hboot.
Also, I tried going back to a Stock Tmo RUU and it would ALWAYS fail at the signature part of the install EVEN THOUGH I relocked my bootloader.
SO- I unlocked my bootloader, I flashed CWM. Works like a charm.. or so it seems. I flashed the radio and it will only boot into CWM. I can flash a ROM but it still only boots into CWM. I cant even get into fastboot. This sucks.
Ideas anyone?
What happens if you do adb reboot bootloader from your computer while the phone is in CWM?
It reboots, the screen flickers for a millisecond or so (I am sure its probably trying to load hboot and gives some type of error so fast that I can't see) and then it goes to CWM. I am thinking about flashing it back to team win recovery...
mbolden said:
OK.. here is the deal: HTC One S, T-MO, flashed recovery (TWRP), NO ROM would work in the WiFi dept. I tried flashing the radio and no matter what I couldnt get it to flash the 1.5 or 1.84 radio. TWRP would take forever and say it was complete, but the radio version still said 1.04 (or something) in hboot.
Also, I tried going back to a Stock Tmo RUU and it would ALWAYS fail at the signature part of the install EVEN THOUGH I relocked my bootloader.
SO- I unlocked my bootloader, I flashed CWM. Works like a charm.. or so it seems. I flashed the radio and it will only boot into CWM. I can flash a ROM but it still only boots into CWM. I cant even get into fastboot. This sucks.
Ideas anyone?
Click to expand...
Click to collapse
mbolden said:
It reboots, the screen flickers for a millisecond or so (I am sure its probably trying to load hboot and gives some type of error so fast that I can't see) and then it goes to CWM. I am thinking about flashing it back to team win recovery...
Click to expand...
Click to collapse
Try flashing the boot.img thats compatible with your ROM. As for going back to stock try this http://forum.xda-developers.com/showthread.php?t=1927939 If you're on Hboot 1.14 then the T-Mo RUU's wont work for you. I had that problem.
antny said:
Try flashing the boot.img thats compatible with your ROM. As for going back to stock try this http://forum.xda-developers.com/showthread.php?t=1927939 If you're on Hboot 1.14 then the T-Mo RUU's wont work for you. I had that problem.
Click to expand...
Click to collapse
OK.. I thought about that.. but my question is: How can I flash a boot.img if I cant get into fastboot? I installed the trickdroid ROM and I have the boot.img from the zip. I DID try to go back to stock (when I could still access everything pretty easily), but It got stuck on the signature part of the RUU. I went back to trickdroid and all was well sans the WiFi not working.
Can I flash a boot.img via ADB since that is the only thing really working right now?
Thanks
-M
If you still need help...
I'm sure you guys have figured this out by now, but I Solved a problem very similar to this one in my Thread. I was able to return to Stock while still being Rooted.

Unable to install ROMs after failed ViperRom Install? Possibly now a paperweight.

Feel like a noob posting this, but I've been trying to fix this problem for the past 24hrs with no luck.
This is the first HTC device I've rooted in nearly a year, and I have to say even though it's pretty, I'm really disliking the evita.
I rooted it using Hasoon's toolkit, and other than being unable to install twrp (or cwm), or getting s-off, it all went well. I just pushed twrp 2.5 to my phone and left s-on until the toolkit gets updated. (not sure how to do this using adb, it's been awhile. ) I have a working hboot, fastboot, and twrp install, and even usb mass storage is working from twrp.
Now, the horror begins. I downloaded team vipers jb rom, and it seemed that the flash went perfectly. But it went into a loop and it seemed to have really messed up the internal sd. Couln't mount it, twrp couldn't find it during my attempts to install other roms or even a factory ruu. I found nocturnals sd fix and that worked like magic, but now twrp will not install any other roms, and everytime I try to push a factory ruu I get a parsing error? On my first attempt at restoring a factory ruu, I forgot that my cid was "1111111" and the bootloader was unlocked so it would fail immediatly. But, even with s-on I managed to get my cid to CWS__001 (ATT's cid) and relocked the bootloader temporarily. But this still didn't change things. Don't know if it matters, but I used hasoons toolkit to push the ruu to my phone and it's during this I get parsing errors. Attempting to install a rom through twrp (CM10, a stock rooted rom, etc.) will immediatly fail also. It says "error executing updater binary in zip and something else that I'll post after trying a CM nightly install.
Update: CM Nightly hangs at the HTC splash screen :crying:
Sorry it's alot to read, but I'm feeling lost at this point...
Ayahuascaa said:
Feel like a noob posting this, but I've been trying to fix this problem for the past 24hrs with no luck.
This is the first HTC device I've rooted in nearly a year, and I have to say even though it's pretty, I'm really disliking the evita.
I rooted it using Hasoon's toolkit, and other than being unable to install twrp (or cwm), or getting s-off, it all went well. I just pushed twrp 2.5 to my phone and left s-on until the toolkit gets updated. (not sure how to do this using adb, it's been awhile. ) I have a working hboot, fastboot, and twrp install, and even usb mass storage is working from twrp.
Now, the horror begins. I downloaded team vipers jb rom, and it seemed that the flash went perfectly. But it went into a loop and it seemed to have really messed up the internal sd. Couln't mount it, twrp couldn't find it during my attempts to install other roms or even a factory ruu. I found nocturnals sd fix and that worked like magic, but now twrp will not install any other roms, and everytime I try to push a factory ruu I get a parsing error? On my first attempt at restoring a factory ruu, I forgot that my cid was "1111111" and the bootloader was unlocked so it would fail immediatly. But, even with s-on I managed to get my cid to CWS__001 (ATT's cid) and relocked the bootloader temporarily. But this still didn't change things. Don't know if it matters, but I used hasoons toolkit to push the ruu to my phone and it's during this I get parsing errors. Attempting to install a rom through twrp (CM10, a stock rooted rom, etc.) will immediatly fail also. It says "error executing updater binary in zip and something else that I'll post after trying a CM nightly install.
Update: CM Nightly hangs at the HTC splash screen :crying:
Sorry it's alot to read, but I'm feeling lost at this point...
Click to expand...
Click to collapse
I think that if you don't have S-OFF, you need to manually flash boot.img as well when installing a ROM. Also, I had issues flashing ROMs with TWRP 2.5. Try 2.3.3.1.
watameron said:
I think that if you don't have S-OFF, you need to manually flash boot.img as well when installing a ROM. Also, I had issues flashing ROMs with TWRP 2.5. Try 2.3.3.1.
Click to expand...
Click to collapse
Hmm... That could explain alot.
I'll try it and let you know what happens.
I have tried the 2.3.3.1 build of twrp, but for some reason the touchscreen doesn't work.
Ayahuascaa said:
Hmm... That could explain alot.
I'll try it and let you know what happens.
I have tried the 2.3.3.1 build of twrp, but for some reason the touchscreen doesn't work.
Click to expand...
Click to collapse
What HBOOT version do you have?
Did you install Viper or ViperXL? ViperXL is what you want for the EVITA.
redpoint73 said:
Did you install Viper or ViperXL? ViperXL is what you want for the EVITA.
Click to expand...
Click to collapse
ViperXL JB
and my hboot is 2.14
Ayahuascaa said:
ViperXL JB
and my hboot is 2.14
Click to expand...
Click to collapse
TWRP 2.3.3.1 should have a working touchscreen with hboot 2.14 are you sure you didn't try 2.3.3.0? that one requires you to downgrade touchscreen firmware first.
You need to fastboot flash boot boot.img where boot.img is extracted from the rom you're flashing if you're s-on and hboot >= 1.14.
If you have SuperCID, do not RUU without S-OFF or you really will have a paperweight.
exad said:
TWRP 2.3.3.1 should have a working touchscreen with hboot 2.14 are you sure you didn't try 2.3.3.0? that one requires you to downgrade touchscreen firmware first.
You need to fastboot flash boot boot.img where boot.img is extracted from the rom you're flashing if you're s-on and hboot >= 1.14.
If you have SuperCID, do not RUU without S-OFF or you really will have a paperweight.
Click to expand...
Click to collapse
Hmm.. I could have. I did it last night after two hours of frustration.
And I just did that to a new install of Nocturnal's rom, but with no luck. It still just hangs at the HTC dev warning screen. I'm going to try re downloading the ViperXL rom and hope I just had a bad copy..
heh. I did that without thinking last night and spent an hour trying to reverse the damage I did. Not only did I have s-on, but my cid was still "1111111".
./
Androidfilehost is only giving me ~50Kbps, so viper's rom has 3 hours left,
but Cleanrom is almost done.
Is there anyway to s-off the evita without booting into an os?
If not, can someone point me to a thread explaining how to manually s-off?
It seems that it's the cause for all this trouble I'm having and I've never had to do manually.
Thank you everyone for your help,
my phone still doesn't have a working os but I do feel like I'm getting somewhere.
Edit: How many of you have had problems installing roms with twrp 2.5.5.0? I'm thinking about trying 2.3.3.1. I thought this was what I flashed last night, but my touchscreen didn't work and according to exad's post I probably had the wrong one.
Use twrp 2.3.3.1 all versions above 2.4 have one issue or another.
You need a Rom installed and usb debugging turned on to s-off.
Here's the link: http://forum.xda-developers.com/showthread.php?t=2155071
Sent from my HTC One X using xda app-developers app
exad said:
Use twrp 2.3.3.1 all versions above 2.4 have one issue or another.
You need a Rom installed and usb debugging turned on to s-off.
Here's the link: http://forum.xda-developers.com/showthread.php?t=2155071
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Thanks,
It seems that now 2.5.5.0 just skips the install and tells me that it was successful...
If so that would explain the hangups on the dev screen.
Ayahuascaa said:
Thanks,
It seems that now 2.5.5.0 just skips the install and tells me that it was successful...
If so that would explain the hangups on the dev screen.
Edit: Can you point me to a link for twrp 2.3.3.1? The only thread on xda for that build doesn't have working download links
Click to expand...
Click to collapse
http://goo.im/devs/OpenRecovery/evita/openrecovery-twrp-2.3.3.1-evita.img
Md5: d903047e6e871acb8f99834c30eb8307
Sent from my HTC One X using xda app-developers app
exad said:
http://goo.im/devs/OpenRecovery/evita/openrecovery-twrp-2.3.3.1-evita.img
Md5: d903047e6e871acb8f99834c30eb8307
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
CleanRom boots!
Thanks again to everyone who helped and exad for the 2.3.3.1 link,

Categories

Resources