Database Info

Stuck! Hep! Won't get past Asus screen or go into apx mode

Ok, I swear I have read 100 pages of similar problems, but it looks like everyone else is able to get into apx mode at least to run nvflash or easy flasher.
1. Turn on xformer with power button - stuck at Asus Eee Pad screen
2. Try to boot into recovery with vol - + power;
- volume up to enter recovery, ded android with an exclamation
- volume down to choose between 'wipe' and 'cold boot' both result in getting stuck at Asus screen
3. Plug in xformer, hold power and vol +; nothing. Never shows up in device manager and it doesn't beep or anything like the ones in all the videos do.
I really just want to get up and running at the very least, as I handle all of my businesses billing through my xformer, but my ultimate goal is to get on the HD-ROM.
I have downloaded the newest firmware from asus, have all the drivers installed (I think), have tried booting into recovery with one, some or all of the new software on the sdcard.
Any more ideas I can try? Do you just have to hold your mouth right to get it into apx mode? I have held those buttons so much I think I'm getting Nintendo thumb!!!
Thanks all!

nobody?
Throw something at me! What update.zip file do I put on the sd card? I have tried putting the newest asus update.zip on there with both its original name and the update.zip name. still comes up with a dead android and an exclamation point.

Download a firmware from Asus, rename it to EP101_SDUPDATE.zip
Put it on the root of your sd card and boot into recovery, hopefully it will flash it and let you boot up.
As for NVFlash, make sure you install teh APX driver.

Still won't get past about a second or two of trying to boot with EP101_SDUPDATE.zip on the sd card. Think I'm stuck, or is there something else I need to try?
Thanks!!

..Do the apx process and try using brks tool......just dont flash touch recovery! I couldnt get the drivers to show but still managed to nvflash recovery using the tool. Its install solarnz external sd recovery so you can put a rom zip onto micro sd.
My issue was after doing this normal on off reboot kept booting to recovery and i had to cold boot into the rom.
I tried the wheelie beta and it has ended up wiping the tf completely.....so dont do that lol. Its still a soft brick as i could still nvflash recovery but decided that aslongs its wiped of root etc id just send it to asus.
If brks tool flashes for you then id try nvflashing prime and see if that works.......i think it will but i ran out of time and patience this morning to do it......at your own risk of course.

scottyf79 said:
..Do the apx process and try using brks tool......just dont flash touch recovery! I couldnt get the drivers to show but still managed to nvflash recovery using the tool. Its install solarnz external sd recovery so you can put a rom zip onto micro sd.
My issue was after doing this normal on off reboot kept booting to recovery and i had to cold boot into the rom.
I tried the wheelie beta and it has ended up wiping the tf completely.....so dont do that lol. Its still a soft brick as i could still nvflash recovery but decided that aslongs its wiped of root etc id just send it to asus.
If brks tool flashes for you then id try nvflashing prime and see if that works.......i think it will but i ran out of time and patience this morning to do it......at your own risk of course.
Click to expand...
Click to collapse
i am the same issue by flashed the touch CWM and window wont able to reconigzed my TF as a APX device
i tried many drivers it still not able to work.
how can i get back to normal CWM? i dont have havy roms or update.zip in internal roms.. and Touch CWM wont able to recongized Removerable sdcard
god~~

The root and backup option should flash you an external recovery.
While tablet reboots hold down volume up and power until reboot stops.
Then try brks tool again and select root and backup.......during the process it may ask if you want to back up but its not worth while as i dont think theres anything to backup. You should end up with ext micro sd recovery.
As i said id look for the prime rom thread and download the nv flash version and see if it works first.
If asus restore the wiped TF without question and everything goes ok il let you know as it may be worth wiping it with wheelie nv recovery and just RMA.

I just simply CAN'T get it into apx mode. I've installed, uninstalled and reinstalled the drivers. Trying to flash ep101_sdupdate.zip still just results in an error. crap.

Hold Volume-UP BEFORE holding power, then hold power for 5 secs (Still holding vol-up( doing this all while connected. It should show in device manager.

Couldnt get Tf to show in device manager either no matter what.
I know it may not seem as though its in apx but if it has stopped rebooting when you do v up and power then it seems it is......
Seems to be an issue thats starting to become more common and very difficult to fix properly.
PC will just not recognise the TF.
Hmm - sorry i couldnt help more but id still try nv flashing Prime and if you can get to a blank screen using volume up and power without the TF rebooting theres a chance its in apx.
Best of luck dude.......

scottyf79 said:
Couldnt get Tf to show in device manager either no matter what.
I know it may not seem as though its in apx but if it has stopped rebooting when you do v up and power then it seems it is......
Seems to be an issue thats starting to become more common and very difficult to fix properly.
PC will just not recognise the TF.
Hmm - sorry i couldnt help more but id still try nv flashing Prime and if you can get to a blank screen using volume up and power without the TF rebooting theres a chance its in apx.
Best of luck dude.......
Click to expand...
Click to collapse
same case for me~~~just cant install the driver

You all can try running Puppy or DSL (damn small linux) in a virtual box on your windows pc. Comes with drivers included and only is a 200/60 Mb download.

Got so frustrated with it I just went and bought a tf-300

c3poman said:
Got so frustrated with it I just went and bought a tf-300
Click to expand...
Click to collapse
no better way to fix it than that
nice one

Yea, I like it pretty good so far. Volume is WAY louder on the 300, even though there is only one speaker. The screen also gets darker, which is nice if you watch tv or browse the interwebs in the bed. Also, wifi reception is great. Haven't tried gps yet, but I'm sure it is improved.
It did get really laggy, but I did a factory reset and it seemed to clear out the cobwebs.
Thanks for y'all's help! I'm still going to try to unbrick that tf-101 and sell it or something. Hate to have a $400 paperweight...

People will buy bricked ones on Ebay for a reduced price, just clarify that it is in fact bricked.

Bricked and Stuck

Hello, first time posted, long time browser...
So, I have a bricked (or almost totally bricked) LG G2X. Here is what I did:
I had flashed the Hellfire Sandwich 1.9 rom and was just fine...until my phone started turning off randomly. After reading somewhere here that I should nullify my phone and the re-flash the rom in order to fix my issue.
So, I backed up my data and downloaded the Aroma Nullifier from Volk (thanks for all you do). I booted to recovery and ran the Nullifier. Once the Nullifier had stopped, still while in Recovery, I tried to access my sdcard to re-flash my Rom...well, I couldn't access my SD card. Furthermore, I couldn't unmount the SD or mount the USB Storage.
Here comes the big mistake:
So, as I was doing some research about how to proceed, my USB cord wiggled out of the phone and my phone lost power. Now, since I had read from Volk not to let that happen, I knew I was in trouble.
At this point, I can only load into the LG Boot Screen and my computer loads drivers for "Asus Android Device" (I have the Asus Transformer Prime Tablet) and under that title "Asus Android Bootloader Interface". No APX, No USB Controller....no other communication.
Last little note, I took the phone to the Tmobile store on a hunch one of the guys who works there had some experience (which he did), and while he was trying to boot into recovery from battery power (something I have been unable to do) he got the USB communication interface...something like "S/W Do not disconnect".... Since then, I have not been able to reproduce that interface.
I am at the end of my abilities...I haven't seen anything that addresses this particular problem though I have tried a bunch of solutions without success. I have looked all through XDA forums, but if there is one I missed, please let me know.
Any thoughts would be very helpful.
Kickingcans

If you haven't already, I recommend looking into nvflash. I'm almost certain you'll be able to fix this. nvflash works at a very low level, requiring that you connect your phone without a battery using a special startup sequence. You will need the APX driver (for Windows) to make it recognize your phone in this recovery mode. At that point, you should be able to flash CWM using nvflash and go from there. If you can't get into recovery, I seem to recall flashing the stock ROM itself with nvflash.
This thread should help you: forum.gsmhosting.com/vbb/archive/t-1503546.html (I can't link yet)
Specifically, the link in the "I solved it" post.
Good luck, and let us know when you get it working :good:

Thanks much...but...
therealnexion said:
If you haven't already, I recommend looking into nvflash. I'm almost certain you'll be able to fix this. nvflash works at a very low level, requiring that you connect your phone without a battery using a special startup sequence. You will need the APX driver (for Windows) to make it recognize your phone in this recovery mode. At that point, you should be able to flash CWM using nvflash and go from there. If you can't get into recovery, I seem to recall flashing the stock ROM itself with nvflash.
This thread should help you: forum.gsmhosting.com/vbb/archive/t-1503546.html (I can't link yet)
Specifically, the link in the "I solved it" post.
Good luck, and let us know when you get it working :good:
Click to expand...
Click to collapse
Thanks for the thoughts. I will try that all again, but I have tried nvflash and tried updating APX drivers. My computer only recognizes the phone as an "Android Bootloader Interface". When I try to manually update/change the drivers for the "Android Device", there is a problem with 64-Bit operating System (Windows 7 Home Premium). I was going to try to boot the computer in Safe Mode, but I don't know if that will help.
I haven't been able to communicate with the phone, and only saw the S/W Upgrade screen once and that was in the Tmobile store without access to my computer.
I am going to try those suggested steps again. Thanks again.
Leigh

Got it going....
THANKS SO MUCH. I knew I was missing something stupid. I kept reading the nvflash instructions and pressing the Power and Volume Down button instead of Volume Up and Down.
Things are going again. Thanks so much.
Kickingcans

help- bricked it, no recovery, what now?

Hey yall. I had the phone for 6 days before I bricked it. I am wondering if there is any stock recovery mode or anything or what I shsould do? I think something went wrong due to using the root toolbox pro app. I have done some backups within the ap as well as Titanium Backup but now the phone will not boot up and I dont know if/how to put it in factory recovery mode. Soft reset does nothing. The Motorola logo will show on startup but then the screen just blacks out forever, not off, just colored black.
A few details, the phone was rooted with Motofail2go, with no recovery and bootloader still locked as far as I know.
Should I take it to Sprint for a factory reset? Is this even an option? What are my other options?
Next time I will probably use the Moto unlock key so I can open the bootloader all legit like and have a recovery mode...

Try holding power button and the down volume key to power off. Once you power off press and hold them again. This should boot you into fastboot, Motorola's adb shell basically. This can take a couple tries, make sure the phone is powered down completely before hitting volume down and power button to get into fastboot. If you can boot into fastboot you can unlock using this guide: http://www.droid-life.com/2012/08/20/how-to-unlock-the-motorola-photon-q-bootloader/
Once unlocked flash the custom recovery of your choice (I like twrp). You can boot into custom recovery by holding volume up and the power button from a powered down state. Here is the link for instructions on how to flash twrp:
http://forum.xda-developers.com/showthread.php?t=1887070
Then you can download one of the stock backups for the Q posted in the development section and restore them using the custom recovery. Most of the ones I have seen have been compatible with twrp.
The only way to download the stock rom backups is to remove the sd card from your phone, plug your sd card into a PC or other device with a card reader, download the stock backups, and place the stock backup rom files on your sd card. Finally place the sd card with the stock backup downloads into your phone.
These backups and information on how to go through this process can be found in this thread on page 2: http://forum.xda-developers.com/showthread.php?t=2001226
The key is to make a backup of your existing rom with twrp and then move the stock backups from your sd card to the twrp/backups/yourdeiceserial/ directory. That creates a backup directory which twrp knows to look for backups in.
Don't feel bad, I've been in that state several times since getting the Q, live and learn.
Sent from my XT897 using xda app-developers app

UnicronAlpha99 said:
Try holding power button and the down volume key to power off. Once you power off press and hold them again. This should boot you into fastboot, Motorola's adb shell basically. This can take a couple tries, make sure the phone is powered down completely before hitting volume down and power button to get into fastboot. If you can boot into fastboot you can unlock using this guide: http://www.droid-life.com/2012/08/20/how-to-unlock-the-motorola-photon-q-bootloader/
Once unlocked flash the custom recovery of your choice (I like twrp). You can boot into custom recovery by holding volume up and the power button from a powered down state. Here is the link for instructions on how to flash twrp:
http://forum.xda-developers.com/showthread.php?t=1887070
Then you can download one of the stock backups for the Q posted in the development section and restore them using the custom recovery. Most of the ones I have seen have been compatible with twrp.
Don't feel bad, I've been in that state several times since getting the Q, live and learn.
Sent from my XT897 using xda app-developers app
Click to expand...
Click to collapse
If that does not work you could drop it in water or something. You have not officially unlocked boot loader so you still have warranty. Or you could just tell sprint it quit working and act completely clueless. At least its bricked with warranty still intact.

matt2k12 said:
Hey yall. I had the phone for 6 days before I bricked it. I am wondering if there is any stock recovery mode or anything or what I shsould do? I think something went wrong due to using the root toolbox pro app. I have done some backups within the ap as well as Titanium Backup but now the phone will not boot up and I dont know if/how to put it in factory recovery mode. Soft reset does nothing. The Motorola logo will show on startup but then the screen just blacks out forever, not off, just colored black.
A few details, the phone was rooted with Motofail2go, with no recovery and bootloader still locked as far as I know.
Should I take it to Sprint for a factory reset? Is this even an option? What are my other options?
Next time I will probably use the Moto unlock key so I can open the bootloader all legit like and have a recovery mode...
Click to expand...
Click to collapse
Both of the methods above are very effective. When I had the first photon I bricked it and just dropped it in water and did a claim. Depending on the insurance you have that way may cost you $100. The other method should work. When I first got this phone I did the exact same thing and to go back and unlock then flash twrp and in stall a stock backup someone had posted.
Sent from my XT897 using Tapatalk 2

UnicronAlpha99 said:
Try holding power button and the down volume key to power off. Once you power off press and hold them again. This should boot you into fastboot, Motorola's adb shell basically. This can take a couple tries, make sure the phone is powered down completely before hitting volume down and power button to get into fastboot. If you can boot into fastboot you can unlock using this guide: http://www.droid-life.com/2012/08/20/how-to-unlock-the-motorola-photon-q-bootloader/
Click to expand...
Click to collapse
Thanks for the response. Is there anything extra extra special about getting into factory fastboot mode? I can't seem to get it done. Is there an official set of instructions anywhere? Does the phone need to be plugged into the PC? It was always my understanding (for the last week) that Power and Vol Down was the soft reset mode which reboots the phone. Therefore it always tries to reboot in normal mode. This is what keeps happening. It never powers completely down using this method.
Anyhow, once I follow your instructions, the Moto logo appears, no Sprint logo appears, the phone "powers on" but the screen is blacked out (not off). After waiting for a while at the blank/black screen, or holding down several buttons like vol or camera I get the first attachment: "Process system is not responding. Would you like to close it?" When I wait nothing happens. When I push OK nothing happens. By chance, I held down power during the notification and the power menu came up behind the ANR notice (second/third attachments). So obviously there are some things working but the main system isn't booting up. And either factory fastboot is nuked or I can't figure it out. When I power down from this accessible power menu and try to do the fastboot (Power / Vol Down) I still havent gotten it to work.
Any other ideas before I take drastic measures?
Since I bought it from Amazon would that be my best route for return or should I go thru a Sprint store?
Thanks in advance.

Hi again yall. You know once I got to thinking about it, I decided to check out the return policy on Amazon Wireless. They will accept any device under warranty for the first 30 days and it is up to Moto for the next 11 months of warranty coverage. They email me a packing label and it ships out 1 day and they ship out the new phone 1 day shipping. Hard to beat, just takes 2 days of shipping and some more fun times with my Epic, 10.1CM style, in the meantime.
Who's to say it wasnt some sort of hardware or software glitch that bricked the phone rather than my screwing around? Nobody knows and it isn't up to the consumer to prove his innocence. I bought everything legally, all the apps at the app store, and only ran the motofail2go root method. Wasn't running any custom Roms, Mods, or anything. I don't feel bad after they got me for another 2 grand for 24 months, and since I have been with Sprint for 10 years;l I have spent well over 10k or 15k with them lifetime.
If any other method pops up between now and when I ship it out I may give it a shot but if not, ah well, capitalism.

matt2k12 said:
Thanks for the response. Is there anything extra extra special about getting into factory fastboot mode? I can't seem to get it done. Is there an official set of instructions anywhere? Does the phone need to be plugged into the PC? It was always my understanding (for the last week) that Power and Vol Down was the soft reset mode which reboots the phone. Therefore it always tries to reboot in normal mode. This is what keeps happening. It never powers completely down using this method.
Anyhow, once I follow your instructions, the Moto logo appears, no Sprint logo appears, the phone "powers on" but the screen is blacked out (not off). After waiting for a while at the blank/black screen, or holding down several buttons like vol or camera I get the first attachment: "Process system is not responding. Would you like to close it?" When I wait nothing happens. When I push OK nothing happens. By chance, I held down power during the notification and the power menu came up behind the ANR notice (second/third attachments). So obviously there are some things working but the main system isn't booting up. And either factory fastboot is nuked or I can't figure it out. When I power down from this accessible power menu and try to do the fastboot (Power / Vol Down) I still havent gotten it to work.
Any other ideas before I take drastic measures?
Since I bought it from Amazon would that be my best route for return or should I go thru a Sprint store?
Thanks in advance.
Click to expand...
Click to collapse
Try using adb. If your computer has drivers on it for phone you might able to get into fast boot. If that does not work I would try Sprint store first. Have locked my phone up several times while hacking wife off in progress and have used adb every time. Only time i have been truely scared is when i soft bricked my nexus 7. had to stay at work for two hours after i got off to get it to recover because i was scared of her lol.
---------- Post added at 02:05 PM ---------- Previous post was at 01:57 PM ----------
If you get adb to recognize device you could take chance and officially unlock boot loader. Then flash twrp. There is a thread in general section about having trouble getting official update. It has a stock recovery in it. Trick would be moving files to recovery section of twrp

I have gotten the phone to soft power down and get into fast boot and custom recovery. It's a bit tricky with timing, I usually wait for the screen to go black after soft reset, let go, and immediately hold power and volume down. If you can not boot into fastboot I honestly don't know what you can do either than return the phone.
Sent from my XT897 using xda app-developers app

UnicronAlpha99 said:
I have gotten the phone to soft power down and get into fast boot and custom recovery. It's a bit tricky with timing, I usually wait for the screen to go black after soft reset, let go, and immediately hold power and volume down. If you can not boot into fastboot I honestly don't know what you can do either than return the phone.
Sent from my XT897 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the help Unicron. I think Brandons method might be my only alternative... but you know what? I already have the box packed up to ship back to Amazon! I am still a noob; I dunno if I could go the distance on this one. I have been updating my Android SDK files since I got the phone but I never got it to recognize boot up thru ADB fastboot. disclaimer* I havent tried it in a couple days since all teh SDK updates completed.
I dunno though I am a big time DIYer when possible. If it werent for the massive amount of tape I put on the box and packing label I would already be trying this method. I can't convince myself just yet. Amazon makes it too easy. I could have the *new* phone by Friday. Then I wouldn't be wasting my remaining work week trying to hack into my personal Christmas present in order to make it function...........................................
Edit - Yes I'm impatient. My job is too demanding and I am trying to set a good precedent for 2013. Wasting the first 3 work days on a phone is not how I intend to start off the year. There is probably a valuable lesson to be learned from this as far as hacking experience and to be honest with the responses here I think I could get it to boot up from PC in SDK/ADB mode and go from there. I just didnt know if that was possible until after I made the claim with Amazon. I still have an entire day today and tomorrow if I want to indulge myself. It doesnt matter if I mail the package today or Wednesday, I can still get it by Friday. I believe this thread is still valuable because we have patterns of repeating past failures and I may find use of it when I recieve my new phone and, darn it, it mysteriously bricks as well. in the same fashion.... the only thing I was really trying to do was get all my apps on my SD card... sad huh?
Edit 2 - Opened up the box, tried fastboot and adb, nothing. Off she goes.

I don't blame you, it sounds easier to exchange in your case any way. The main suggestion I have is if you are getting into any type of build.prop or operating system tweaks that have potential to lead to boot loops or cause the phone not to boot, then unlock the bootloader and install custom recovery.
The Moto-fail method seems limited to only be able to run apps that require root. For me this has no use as I want to be able to have complete control over all aspects of the Android OS. There is not a huge mod community for the Q as yet but I believe Cyanogen will be a reality as Interloper continues working on it. I came from an Epic with Cyanogen and soft-bricked it a minimum of 50 times. CWM was very forgiving on that phone, the Q is a lot more finicky and frustrating.
If you have insurance through the carrier then you are going to pay $150 for a refurb if something goes wrong and you hard brick the phone. If you unlock bootloader and install custom recovery then you have a fail-safe in the form of nandroid backups and restores. Then you can mod away with little fear.
Good luck on the new phone and I hope you don't give up after six days of modding with the Q!
Sent from my XT897 using xda app-developers app

matt2k12 said:
Thanks for the help Unicron. I think Brandons method might be my only alternative... but you know what? I already have the box packed up to ship back to Amazon! I am still a noob; I dunno if I could go the distance on this one. I have been updating my Android SDK files since I got the phone but I never got it to recognize boot up thru ADB fastboot. disclaimer* I havent tried it in a couple days since all teh SDK updates completed.
I dunno though I am a big time DIYer when possible. If it werent for the massive amount of tape I put on the box and packing label I would already be trying this method. I can't convince myself just yet. Amazon makes it too easy. I could have the *new* phone by Friday. Then I wouldn't be wasting my remaining work week trying to hack into my personal Christmas present in order to make it function...........................................
Edit - Yes I'm impatient. My job is too demanding and I am trying to set a good precedent for 2013. Wasting the first 3 work days on a phone is not how I intend to start off the year. There is probably a valuable lesson to be learned from this as far as hacking experience and to be honest with the responses here I think I could get it to boot up from PC in SDK/ADB mode and go from there. I just didnt know if that was possible until after I made the claim with Amazon. I still have an entire day today and tomorrow if I want to indulge myself. It doesnt matter if I mail the package today or Wednesday, I can still get it by Friday. I believe this thread is still valuable because we have patterns of repeating past failures and I may find use of it when I recieve my new phone and, darn it, it mysteriously bricks as well. in the same fashion.... the only thing I was really trying to do was get all my apps on my SD card... sad huh?
Edit 2 - Opened up the box, tried fastboot and adb, nothing. Off she goes.
Click to expand...
Click to collapse
FWIW, pressing vol down + power til it resets then pressing the camera button + power once the screen is black gets you to the Boot Mode Selection Menu, where you can start recovery, fastboot, BP tools (still not sure what that is entirely) and some others. Seems to be a fairly reliable/easy method for getting to both recovery and fastboot from any point.

befrosty8612 said:
FWIW, pressing vol down + power til it resets then pressing the camera button + power once the screen is black gets you to the Boot Mode Selection Menu, where you can start recovery, fastboot, BP tools (still not sure what that is entirely) and some others. Seems to be a fairly reliable/easy method for getting to both recovery and fastboot from any point.
Click to expand...
Click to collapse
Sure wish I would have known that ahead of time. Does this work without any recovery mode and with the bootloader still locked?

matt2k12 said:
Sure wish I would have known that ahead of time. Does this work without any recovery mode and with the bootloader still locked?
Click to expand...
Click to collapse
It does work without any recovery mode and I believe it still works without the bootloader being unlocked, I didn't know about this myself until after I had already unlocked it. Sorry I couldn't help out sooner.

befrosty8612 said:
It does work without any recovery mode and I believe it still works without the bootloader being unlocked, I didn't know about this myself until after I had already unlocked it. Sorry I couldn't help out sooner.
Click to expand...
Click to collapse
Awesome, I am wanting to do the backdoor root method again but, of course, may brick it. I dont think Amazon will keep sending me new ones.... but maybe!

befrosty8612 said:
FWIW, pressing vol down + power til it resets then pressing the camera button + power once the screen is black gets you to the Boot Mode Selection Menu, where you can start recovery, fastboot, BP tools (still not sure what that is entirely) and some others. Seems to be a fairly reliable/easy method for getting to both recovery and fastboot from any point.
Click to expand...
Click to collapse
For anyone concerned, I knew it would only be a matter of time until bricking my new device. This damn Root Toolbox Pro did it to me again, and on a simple, menial task. I am going to be working thru the motions on getting this to work.
Using the instructions quoted I did get stock recovery to work or at least flash on the screen for a split second. Seems like there is a timer on the recovery screen. I am having trouble with the fastboot prompt though on the PC. Do I do it in the "platform-tools" folder which contains fastboot or in the "tools" folder of the main SDK directory? I am really a noob, can you give me the cliff notes of how to get into ADB, fastboot, etc on the Photon Q in order to do a factory reset? I already have Android SDK installed and completely up to date so that is done. And Fastboot is installed. I'm just having trouble crossing the finish line here... I can get the fastboot page opened in the stock recovery but from there I'm lost. I dont know what to type into the command prompt, in what directory, or what.... Also when I open the command prompt in the SDK folder on the PC with fastboot in the directory and type "adb reboot bootloader" it says "device not found". Maybe (surely) that is the wrong prompt?
FWIW my phone is showing the dead android guy. I didnt do anything besides try and clear up my Play Store download list which required a reboot. The phone never started back up. I dont know how much damage was done or info was lost or whatever, but seeing as how I was rooted but still locked, I had no custom recovery. So no back ups. Is there anything to restore or am I looking at a full wipe and restore?

matt2k12 said:
For anyone concerned, I knew it would only be a matter of time until bricking my new device. This damn Root Toolbox Pro did it to me again, and on a simple, menial task. I am going to be working thru the motions on getting this to work.
Using the instructions quoted I did get stock recovery to work or at least flash on the screen for a split second. Seems like there is a timer on the recovery screen. I am having trouble with the fastboot prompt though on the PC. Do I do it in the "platform-tools" folder which contains fastboot or in the "tools" folder of the main SDK directory? I am really a noob, can you give me the cliff notes of how to get into ADB, fastboot, etc on the Photon Q in order to do a factory reset? I already have Android SDK installed and completely up to date so that is done. And Fastboot is installed. I'm just having trouble crossing the finish line here... I can get the fastboot page opened in the stock recovery but from there I'm lost. I dont know what to type into the command prompt, in what directory, or what.... Also when I open the command prompt in the SDK folder on the PC with fastboot in the directory and type "adb reboot bootloader" it says "device not found". Maybe (surely) that is the wrong prompt?
FWIW my phone is showing the dead android guy. I didnt do anything besides try and clear up my Play Store download list which required a reboot. The phone never started back up. I dont know how much damage was done or info was lost or whatever, but seeing as how I was rooted but still locked, I had no custom recovery. So no back ups. Is there anything to restore or am I looking at a full wipe and restore?
Click to expand...
Click to collapse
As abnormal as it seems, your situation seems pretty normal... at least from my shoes. I went through the same scenario... I didn't know what adb was, or fastboot, etc. So, here's what I know
the fastboot commands work even if adb doesnt see it in the list of devices attached. Somehow it just works (as long as the phone is in fastboot mode).
If you're able to get to the fastboot mode, things should be okay. Just open a windows explorer window to the Platform-Tools, hold the shift key and right click on a blank space within the window, then click open command window here.
you should be able to pass any adb (if the phone is on and recognized) or fastboot (if phone is in fastboot mode) commands from that command prompt.
Also, if you have a stock recovery, CMW, or TWRP image, this is the folder to copy those .img files to. Once you get your phone into fastboot mode and its plugged into the computer, just type into the command prompt:
Code:
fastboot flash recovery recovery.img
If you're just looking to reboot the phone into recovery
If you have a CWM or TWRP recovery just replace the recovery.img with whatever the .img file that you have. Also, as a tip instead of writing the entire file name, just press the first couple letters then press the tab key within the command prompt, it should fill in the rest. keep pressing tab until you get to the .img file name you want.
To avoid doing this again, maybe I can help... what were you trying to do to begin with? From the sound of it, you were trying to root the phone with the Root Toolbox Pro but it bricked, and then you tried to reboot into recovery and then got the red android... ?

befrosty8612 said:
As abnormal as it seems, your situation seems pretty normal... at least from my shoes. I went through the same scenario... I didn't know what adb was, or fastboot, etc. So, here's what I know
the fastboot commands work even if adb doesnt see it in the list of devices attached. Somehow it just works (as long as the phone is in fastboot mode).
If you're able to get to the fastboot mode, things should be okay. Just open a windows explorer window to the Platform-Tools, hold the shift key and right click on a blank space within the window, then click open command window here.
you should be able to pass any adb (if the phone is on and recognized) or fastboot (if phone is in fastboot mode) commands from that command prompt.
Also, if you have a stock recovery, CMW, or TWRP image, this is the folder to copy those .img files to. Once you get your phone into fastboot mode and its plugged into the computer, just type into the command prompt:
Code:
fastboot flash recovery recovery.img
If you're just looking to reboot the phone into recovery
If you have a CWM or TWRP recovery just replace the recovery.img with whatever the .img file that you have. Also, as a tip instead of writing the entire file name, just press the first couple letters then press the tab key within the command prompt, it should fill in the rest. keep pressing tab until you get to the .img file name you want.
To avoid doing this again, maybe I can help... what were you trying to do to begin with? From the sound of it, you were trying to root the phone with the Root Toolbox Pro but it bricked, and then you tried to reboot into recovery and then got the red android... ?
Click to expand...
Click to collapse
Thanks for the response. So, all I have to do is: go to fastboot and flash a stock recovery image file and it will automatically wipe the phone, cache, everything, and restore the operating system? Sounds awfully easy! I found some stock files in this post : http://forum.xda-developers.com/showthread.php?t=2001226&page=2 Are these the ones you used before?
Last question: I can flash CWM or TWRP but wont be able to access them if my bootloader is locked, correct? So flashing a stock recovery will allow me to have my stock phone back again, locked and un-rooted? I guess if I cant get it to work with the stock recovery then I can unlock the bootloader and do a CWM or TWRP recovery and then flash the stock .img files?
Thanks again for your help. I already had root with the motofail2go method which I like using but seems like when I try and use some generic root feature from apps from the app store that it will crash/brick the phone cuz obviously those apps are generalized and likely to brick certain percentage of devices....

Ok what does this mean? Something with the bootlaoder obviously. Does it need to be unlocked?
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot flash recover
y qrecovery1.img
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'recovery' (5962 KB)...
OKAY [ 0.479s]
writing 'recovery'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.755s
C:\Program Files (x86)\Android\android-sdk\platform-tools>
And on the phone screen it says "invalid image size for partition recovery" twice for both times I tried this method.

You will need to flash the system image as well if you want those, as the recovery image will only flash the recovery. The files in that link are for twrp only... so you'll have to be able to get there first.
With the custom recoveries, I'm not 100% sure whether or not you will be able to use them without being unlocked. I would wait to see if anyone else can answer that question for you, but if you did try it without an unlocked bootloader, you at least have the stock recovery to fall back on if needed.
Sent from my XT897 using xda app-developers app
---------- Post added at 09:16 PM ---------- Previous post was at 09:12 PM ----------
I'm thinking it could either be that your phone is full and the image you're flashing is too large to fit on the space available...
Or you're trying to flash custom software on a locked phone.
Hopefully someone is able to answer that a little better...
Sent from my XT897 using xda app-developers app

You can't alter the stock recovery (flash a custom recovery like twrp or cwm) in fastboot without having the bootloader unlocked. Your options are to unlock your bootloader, flash custom recovery, create a backup of your current setup, download one of the stock working backups, place it in the backups folder for twrp on your external sd card, and restore one of the known working backups in the development section (befrosty linked to one). Or you could use RSD lite to return to stock using a stock factory firmware flash. That involves connecting your phone to your PC and flashing the phone back to factory stock. Information on RSD Lite and links to the FXZ's can be found here.
http://forum.xda-developers.com/showthread.php?t=2095536
Sent from my XT897 using xda app-developers app

[Q] Bricked TF700

Hi.
I own a TF700T and seems to have bricked it. Last status was: I had the latest stock ROM with root running and wanted to get a CM11 based 4.4.2 image from here. I downloaded it and used rom manager to get it installed. But the install script failed at some point and I thought the recovery might be outdated. So I used ROM Manager to update recovery... I tried CWM and TWRP option. Finally I booted up into recovery trying again to install those damn rom - I used the option to wipe all data / settings from the main menu and tried again to install the ROM which again failed (I do not remember the error message clearly). I gave up. I used the "reboot" option.
Now:
- Powering up gets me into the screen with the ASUS logo (left upper corner says "the device is unlocked"). Here it is stuck forever.
- Power + Vol-Down is same as just Power - I do not get into flashboot with those 3 small icons... I just get the ASUS logo and nothing else happens. Reset hole does not change situation. The device is pretty much "always on" now (till battery is exhausted) as long-press Power turns off and immediately on again
- Only thing that seems to work: Power + Vol-Up ends up in APX mode - my computer recognizes the device via USB at this point
Unfortunately I never did any set up to nvflash.
Do I have any chance to get this thing alive again?
Thanks a lot in advance,
q2.

Quentin2 said:
Hi.
I own a TF700T and seems to have bricked it. Last status was: I had the latest stock ROM with root running and wanted to get a CM11 based 4.4.2 image from here. I downloaded it and used rom manager to get it installed. But the install script failed at some point and I thought the recovery might be outdated. So I used ROM Manager to update recovery... I tried CWM and TWRP option. Finally I booted up into recovery trying again to install those damn rom - I used the option to wipe all data / settings from the main menu and tried again to install the ROM which again failed (I do not remember the error message clearly). I gave up. I used the "reboot" option.
Now:
- Powering up gets me into the screen with the ASUS logo (left upper corner says "the device is unlocked"). Here it is stuck forever.
- Power + Vol-Down is same as just Power - I do not get into flashboot with those 3 small icons... I just get the ASUS logo and nothing else happens. Reset hole does not change situation. The device is pretty much "always on" now (till battery is exhausted) as long-press Power turns off and immediately on again
- Only thing that seems to work: Power + Vol-Up ends up in APX mode - my computer recognizes the device via USB at this point
Unfortunately I never did any set up to nvflash.
Do I have any chance to get this thing alive again?
Thanks a lot in advance,
q2.
Click to expand...
Click to collapse
Unfortunately ROM Manager does not work with the TF700 and you are not the first one to find out the hard way...
If you cannot find a way to boot into the bootloader to have fastboot, there's nothing you can do anymore without the NVflash blobs.
Did you try holding Vol - and then pressing the reset button in that little pinhole on the side of the tablet?
If you have ADB drivers installed on your PC you could try if you can establish an ADB connection at any point. If you did, you could issue the command: "adb reboot bootloader", which would enable you to flash a recovery and/or bootloader. This probably won't work since you need to be in the recovery or have Android booted for ADB to work, but worth a try anyway...
Admittedly these are very thin straws - but what have you got to loose?
Also: Just a few days ago a user here was stuck on a bootloop to recovery and couldn't get out of it. He left it alone overnight and all the sudden the bootloop sorted itself out... I have no explanation for it and it is unlikely to happen in your case, but you never know...
Good luck!

Thanks for replying.
Yes, I did keep Vol-Down (means Vol-Left) pressed while pinching the reset button. It did not help.
I will experiment a bit more. It's not really a boot "loop" - it gets stuck at the ASUS logo and this does not change anymore. Not overnight.
So far I could only see it being recognized as USB device in APX mode. Can you give me a bit background here? I have nvflash here. The blobs are not available anywhere on the net? Or why is that all a big fuzz? I used to have a Notion Ink Adam and APX saved my life several times, but the blobs were available to everybody. Nobody has the blobs here? Or are they device-specific?
I cannot believe that a today's device with a non-bricked bootloader and working APX is totally lost and even the manufacturer will only offer a costly RMA to replace the whole mainboard!?
Best regards,
q2.

Quentin2 said:
Thanks for replying.
Yes, I did keep Vol-Down (means Vol-Left) pressed while pinching the reset button. It did not help.
I will experiment a bit more. It's not really a boot "loop" - it gets stuck at the ASUS logo and this does not change anymore. Not overnight.
So far I could only see it being recognized as USB device in APX mode. Can you give me a bit background here? I have nvflash here. The blobs are not available anywhere on the net? Or why is that all a big fuzz? I used to have a Notion Ink Adam and APX saved my life several times, but the blobs were available to everybody. Nobody has the blobs here? Or are they device-specific?
I cannot believe that a today's device with a non-bricked bootloader and working APX is totally lost and even the manufacturer will only offer a costly RMA to replace the whole mainboard!?
Best regards,
q2.
Click to expand...
Click to collapse
For the TF700 the nvflash blobs are device specific - sorry.

Damn. That was the only answer I didn't want to read
Thanks a lot. So chances are gone, only RMA could help... I will ask friendly at Asus what costs they will charge...
q2.

Update:
Reply is here.
They only want to exchange mainboard. They of course know (and it seems that this is the only thing they know) that my bootloader was unlocked, therefore this is no case of guarantee for them. I know, I wrote to them that I just want to know how much they wanna charge me to fix this issue.
But: they don't want to tell me how much. They say they do not even know which revision and what hardware is inside my tablet, not even from my serial number. And I must first send them my tablet and they will charge me 95 Euro to check what's going on. And then they will tell me how much it will cost (and according to other threads I saw prices of over 400 Euro for a mainboard change - the TF701 successor model cost 450 Euro new in store)...
I somehow feel the need to reply that if they would've put only half the energy the put into logging who has unlocked the bootloader into the fact of making APX usable as a emergency recovery (as obviously not even Asus is able to generate a working blob for my device), they would have higher customer satisfactory statistics. I still just cannot believe a today's device lacks of all recovery options after a bootloader fails for some reason - as well as I cannot understand why Koush did not display a warning in ROM manager if problems are known to the community with this specific device (I mean the problem did not arise last week and ROM manager had tenths of updates since then).
I know that in the end all was my fault. And all flashing is done on our own risk. I will have to deal with it.
Phew...

Unlucky. It should be be stickied here somewhere that ROM Manager bricks the TF700 but then there is no guarantee it would be read. It is well known on this forum but that doesn't help people that don't visit frequently.
You can replace the mainboard yourself fairly easily. Watch the you tube vids on how to do it,. That is what I would do if I was in your position.

berndblb said:
For the TF700 the nvflash blobs are device specific - sorry.
Click to expand...
Click to collapse
Is there a way to backup my blobs before I leave all stock then?
Thanx! Zeddock
Sent from my SAMSUNG-SGH-I717 using XDA Premium 4 mobile app

zeddock said:
Is there a way to backup my blobs before I leave all stock then?
Thanx! Zeddock
Sent from my SAMSUNG-SGH-I717 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2455925&highlight=nvflash

Any Solution?
Quentin2 said:
Hi.
I own a TF700T and seems to have bricked it. Last status was: I had the latest stock ROM with root running and wanted to get a CM11 based 4.4.2 image from here. I downloaded it and used rom manager to get it installed. But the install script failed at some point and I thought the recovery might be outdated. So I used ROM Manager to update recovery... I tried CWM and TWRP option. Finally I booted up into recovery trying again to install those damn rom - I used the option to wipe all data / settings from the main menu and tried again to install the ROM which again failed (I do not remember the error message clearly). I gave up. I used the "reboot" option.
Now:
- Powering up gets me into the screen with the ASUS logo (left upper corner says "the device is unlocked"). Here it is stuck forever.
- Power + Vol-Down is same as just Power - I do not get into flashboot with those 3 small icons... I just get the ASUS logo and nothing else happens. Reset hole does not change situation. The device is pretty much "always on" now (till battery is exhausted) as long-press Power turns off and immediately on again
- Only thing that seems to work: Power + Vol-Up ends up in APX mode - my computer recognizes the device via USB at this point
Unfortunately I never did any set up to nvflash.
Do I have any chance to get this thing alive again?
Thanks a lot in advance,
q2.
Click to expand...
Click to collapse
Unfortunately I'm stuck in same boat I tried to wipe out settings completely and clockwork mode was stuck and I was able to wipe recovery with TWRP or so I thought tried to reboot into recovery got stalled and now stuck on asus screen. I'm not opposed to buying a new motherboard but I find it very hard to believe that no one has come up with a solution to flashing the mainboard with the original firmware. I'm tempted to ask asus but I know the bill will be more then the tablet. Did you find an easier solution or do I just have to swap out the mainboard?

sbdags said:
http://forum.xda-developers.com/showthread.php?t=2455925&highlight=nvflash
Click to expand...
Click to collapse
Thanx, but it seems like to backup blobs I have to do the very thing that will risk me needing backup of my blobs? ... install a custom bootloader before I have a backup?
Is this right?
Is this a safer method?
zeddock

zeddock said:
Thanx, but it seems like to backup blobs I have to do the very thing that will risk me needing backup of my blobs? ... install a custom bootloader before I have a backup?
Is this right?
Is this a safer method?
zeddock
Click to expand...
Click to collapse
That's correct. You have to flash a modified bootloader and recovery. Done correctly this is not risky at all. But if there is a single line in the instructions you are not sure you understand, you are not quite ready.
There are quite a few tutorials on flashing in fastboot on this forum. Read them.
But generating your nvflash blobs you have to do without a safety net. It's worth it though! I have become much more adventurous with my tablet since I have the blobs squared away...

berndblb said:
Done correctly this is not risky at all.
Click to expand...
Click to collapse
How do you define risk?
Flashing a bootloader (without having nvflash access) is always risky by my definition, it *can* permabrick your tablet if something goes wrong at the wrong moment. But it's the best we have.

Question HELP PHONE STUCK ON BOOTLOOP AT GOOGLE WRITING AND CANT GET DATA OUT

Hi all,
Im in a desperate and urgent need of help.
My Mrs pixel 7 pro is stuck in a boot loop that restarts 5 seconds after the google writing appears when starting. I wasn't home when it happened but she doesnt really make sure her phone has some battery before turning it on, as soon as she sees 2% she starts it, so im guessing maybe she bricked it while the phone was trying to apply an update when turning it on as she said that the external battery didnt have any juice left inside.
Anyway,
I know i can wipe the phone from recovery mode and make it into a factory reset phone. The issue here is we have over 6000 photos and videos of our son in that phone that she hasnt copied to the external hard drive i gave her for months due to her not liking that her little laptop is slow.
I tried recovery mode Reboot, i tried going into safe mode (no luck as it will go straight into fastboot mode). She doesnt care about a lot of things and obviously she never unlocked the developer setting or bootloader so device state is also locked.
I am begging you, anything any info or advice on how i can get those pictures out of the phone. Is there any way i can flash the stock firmware just to make the phone start and copy them after?
Any possibility or chance or retrieval?
I am willing to pay anyone that can guide me in the right direction as there are over 6 months worth of photos and memories.
Thanks in advance and may the luck be on my side.

andyysk said:
Hi all,
Im in a desperate and urgent need of help.
My Mrs pixel 7 pro is stuck in a boot loop that restarts 5 seconds after the google writing appears when starting. I wasn't home when it happened but she doesnt really make sure her phone has some battery before turning it on, as soon as she sees 2% she starts it, so im guessing maybe she bricked it while the phone was trying to apply an update when turning it on as she said that the external battery didnt have any juice left inside.
Anyway,
I know i can wipe the phone from recovery mode and make it into a factory reset phone. The issue here is we have over 6000 photos and videos of our son in that phone that she hasnt copied to the external hard drive i gave her for months due to her not liking that her little laptop is slow.
I tried recovery mode Reboot, i tried going into safe mode (no luck as it will go straight into fastboot mode). She doesnt care about a lot of things and obviously she never unlocked the developer setting or bootloader so device state is also locked.
I am begging you, anything any info or advice on how i can get those pictures out of the phone. Is there any way i can flash the stock firmware just to make the phone start and copy them after?
Any possibility or chance or retrieval?
I am willing to pay anyone that can guide me in the right direction as there are over 6 months worth of photos and memories.
Thanks in advance and may the luck be on my side.
Click to expand...
Click to collapse
If you can enter recovery mode try to sideload the same exact ota package of the rom she's running, maybe that can help. Good luck!

andyysk said:
Hi all,
Im in a desperate and urgent need of help.
My Mrs pixel 7 pro is stuck in a boot loop that restarts 5 seconds after the google writing appears when starting. I wasn't home when it happened but she doesnt really make sure her phone has some battery before turning it on, as soon as she sees 2% she starts it, so im guessing maybe she bricked it while the phone was trying to apply an update when turning it on as she said that the external battery didnt have any juice left inside.
Anyway,
I know i can wipe the phone from recovery mode and make it into a factory reset phone. The issue here is we have over 6000 photos and videos of our son in that phone that she hasnt copied to the external hard drive i gave her for months due to her not liking that her little laptop is slow.
I tried recovery mode Reboot, i tried going into safe mode (no luck as it will go straight into fastboot mode). She doesnt care about a lot of things and obviously she never unlocked the developer setting or bootloader so device state is also locked.
I am begging you, anything any info or advice on how i can get those pictures out of the phone. Is there any way i can flash the stock firmware just to make the phone start and copy them after?
Any possibility or chance or retrieval?
I am willing to pay anyone that can guide me in the right direction as there are over 6 months worth of photos and memories.
Thanks in advance and may the luck be on my side.
Click to expand...
Click to collapse
As @acuicultor said;
Here's Googles official OTA updates and instructions etc.
From what i've read briefly and as far as i can gather (still running a stock pixel 7 pro - for the first phone in god knows how long, so i'm not well read on this device but...) if you can sideload the latest OTA update via sideload then you should in theory be able to save the data and boot again. But if you flash full firmware then your device will be wiped in the process (if that's even possible with a locked bootloader).
Very best of luck
EDIT: hmm thinking about it, you won't have enabled USB debugging in dev options, hang on, i'll reboot direct to recovery to see if i can get the device recognised without USB debugging enabled. Sorry to be vague (hopefully someone more experienced with this device will chime in with more advice), like i say, i'm not rooted, flashed with custom rom - nothing, just plain old stock so i've not read up much on proceedures for this device. Bare with me!!

Had another thought, do you or have you been using Google photos to view your images on the device. If so, did you enable backup photos online when you first set the app up? If so, they could be backed up automatically...
Edit: my bad..
Try this link
If that fails just Google 'Google photos sign in'

Just tried from recovery to run some adb cmd's, no joy without enabling debugging 1st
There may be hope... If your photos aren't backed online already from above link...
EDIT:
1. From power off state (make sure the device is charged before apply any ota update) Press vol down and power together. As soon as it boots to google logo, let go of vol down, then power. That will put you in fastboot mode where you use the vol up/down to navigate to Recovery mode and power button to select.
2. Then when you have the screen that says 'no command', press power button and CLICK vol up (releasing vol up straight away but keeping power pressed). That'll take you a blue menu at top of screen.
3. Use vol buttons to navigate to 'apply update from adb'. I have checked using 'adb devices' and 'adb reboot sideload' cmd's on PC and the device is now recognised...
Will write further instructions shortly. (no guarantees this will work tho without losing data...or even if it'll work at all - i suspect the OTA update with just fail to transfer)
OR there is another option, using the same instructions above (1) in fastboot mode use the volume buttons to navigate the menu, power button to select Rescue mode. Then contact your service center for support who will advise/offer support - hopefully, which may end up having to send the device in and still offers no guarantee of preserved data

reg66 said:
@acuicultor said;
Here's Googles official OTA updates and instructions etc.
Click to expand...
Click to collapse
Following the link it's all explained there:
- no USB-Debugging needed
- booting recovery by key combo
- no loss of any data when using the OTA files
Also turning on USB-Debugging in developer options is not necessary for the recovery. It's enabled by default and moreover the recovery doesn't consider any system settings like disabled/enabled USB-Debugging.

WoKoschekk said:
Following the link it's all explained there:
- no USB-Debugging needed
- booting recovery by key combo
- no loss of any data when using the OTA files
Also turning on USB-Debugging in developer options is not necessary for the recovery. It's enabled by default and moreover the recovery doesn't consider any system settings like disabled/enabled USB-Debugging.
Click to expand...
Click to collapse
Ahh cool. I obviously didn't read much of it! Dunno what's happened to the chap, maybe his wife has killed him lol

reg66 said:
Ahh cool. I obviously didn't read much of it! Dunno what's happened to the chap, maybe his wife has killed him lol
Click to expand...
Click to collapse
yes, maybe...
FYI: Stock recovery only uses a minimal adbd with a very limited set of commands. That's why some known ADB commands won't work.
minadbd