I have received an official upgrade after that sky note is stuck on recovery , before the upgrade i was using android 4.0.4 now my phone is rebooting normally in CMW recovery only.
please help me,
amirali2 said:
I have received an official upgrade after that sky note is stuck on recovery , before the upgrade i was using android 4.0.4 now my phone is rebooting normally in CMW recovery only.
please help me,
Click to expand...
Click to collapse
A lot of people on different forums asking same thing about T100K stuck in recovery - i was one of them 2 days ago
SOLUTION:
I fixed this using stock recovery, but you can try going in CWM and wipe usb storage / internal storage and then reboot. If still not fixed, you have to flash BINX file of T100K (guides are available for flashing BINX). After BINX is installed it will go back to stock recovery, use the option 'initialize internal sd card' and it will start formatting internal memory. After its done you can reboot and phone will work.
T100K ICS BINX:
https://www.mediafire.com/?p1fnnlj8a3igh
Related
Hello, I believed I have an issue. Hope it not to serious. My problem is that i can't get passed the ASUS logo Splash screen.
1st: I was one stock jelly bean rooted cwm recovery v6.0.1.2 and decide I wanted to get on to Hydro 3.6 Jellybean (9/17)
2nd I downloaded the ROM wiped cache,delvic and factory reset then installed, didn't install at first so I tried a mirror and then it installed correctly restarted the tablet and here I am.
3rd: Tried clean rom 2.0 still no luck.
Please help I'm 15 and don't wanna break the bad news to my parents.
Ps: I am able to still boot into CWM recovery 6.0.1.2 tried everything nothing working and able to fastboot but cold boot and wipe data don't work and haven't shut off tablet since accident will remain on and charged.
jekovenatinsley said:
Hello, I believed I have an issue. Hope it not to serious. My problem is that i can't get passed the ASUS logo Splash screen.
1st: I was one stock jelly bean rooted cwm recovery v6.0.1.2 and decide I wanted to get on to Hydro 3.6 Jellybean (9/17)
2nd I downloaded the ROM wiped cache,delvic and factory reset then installed, didn't install at first so I tried a mirror and then it installed correctly restarted the tablet and here I am.
3rd: Tried clean rom 2.0 still no luck.
Please help I'm 15 and don't wanna break the bad news to my parents.
Ps: I am able to still boot into CWM recovery 6.0.1.2 tried everything nothing working and able to fastboot but cold boot and wipe data don't work and haven't shut off tablet since accident will remain on and charged.
Click to expand...
Click to collapse
It's just a softbrick. As long as you can get into fastboot you are ok.
I suggest reflashing the stock jellybean rom. You can download it from the asus website.
As for getting it into your device (i dont know if cwm supprots sd cards yet). You can use the adb push commands or you can flash twrp which supprots flashing from the sd card.
Also next time read the rom thread carefully. It specifically says you should use twrp.
Hey man try this, it works for me (Same situation but i'm 17 xD)
1) Download this http://www.mediafire.com/?5diezc69u1b16f8
2)Extract the "recovery1" folder in C:\ drive
3)Plug the tablet to PC and turn it on while pressing VOL- and POWER, then go to the fastboot mode (is the USB symbol)
4)Download from here ( http://support.asus.com/Download.asp...300T&p=20&s=16 ) the WW of US instead of the version of the tablet you have got, the extract the blob file in the "recovery1" folder
5)Open CMD, type cd c:\recovery1 then press enter
6)Type dir to see if all the files are in the folder
7)type this command fastboot -i 0x0B05 flash system blob
8)After is done, type fastboot -i 0x0B05 reboot
9)Enjoy!
If you can't do any of this steps, post here and I will help you
Fixed It!
ZerOMKD said:
It's just a softbrick. As long as you can get into fastboot you are ok.
I suggest reflashing the stock jellybean rom. You can download it from the asus website.
As for getting it into your device (i dont know if cwm supprots sd cards yet). You can use the adb push commands or you can flash twrp which supprots flashing from the sd card.
Also next time read the rom thread carefully. It specifically says you should use twrp.
Click to expand...
Click to collapse
Hey actually like 10 mins after I posted I was able to install Clean Rom.
I formated every partition except sd card in v6.0.1.2 cwm recovery as well as factory reset and wipe dalvik.
Actually I like cwm recovery better and it does support microsd cards now. This is the jb/touch bootloader.
Thanks for the Help anyways.
.
Same problem, when i try to flash JB Hydro 3.6... i stuck into bootloop... i flash the official asus update and it works... But when i try to flash the hydro rom it doesn't work.... Why?
I guess you have the new JellyBean Bootloader... because of that you can only flash ROM's which are made for it...
.
I know... i update from jb ota to hydro... but when i flash the 3.6 i got bootloop... and now i can flash this rom...
Hello, friends!
I have a big problem with my Samsung Galaxy R, here is what happened:
I have used BlueBerry Rom V1 on Android 4.0.4 Kernel, but tried to install 4.2.2 Avatar ROM - zip via CWM. It shows me that everything is ok, reboot the phone and after that - I only see the Avatar screen but phone doesn't load. I load download mode and install new ROM via Odin, but the same thing happened - everything is ok, the ROM is installed successfully, I see the starting screen with Samsung logo, but that's all. It doesn't want to start - I wait, and wait, and nothing.
Here are some points that maybe are important:
- When I first install Android 4.0.4 Kernel I swap internal (4GB) with external SD (32GB) - my SD card become phone memory. After that many problems happened. I think that SD card I bought is not good quality and all the files I copy on the SD card (recognized as USB phone memory), won't open. For example when I make camera photos and save them to this card, I can't open them after that. When use the internal (4GB memory, recognized as 'external sd'), there is no problem.
- For this reason I copy the Avatar ROM .zip file both to external and internal sd card. So when I choose install from sd card (unlike the phone, CWM don't recognize the external 32 SD card as internal) - I choose the zip file, and immediately receive an error - bad file. So I was unable to install the Avatar ROM via CWM with the standard option "install zip from sdcard". I choose "install zip from internal memory" and then choose the zip file. As I said - everything was successful, until I realize that the phone doesn't want to load.
I am sorry for my bad English and hope you will understand my problem. I tried with Kies Firmware Emergency Firmware recovery, but it is said that I need recovery code.Also tried with Kies Firmware Upgrade & Installation, but nothing happened.
I really hope that here can find somebody who will help me. Thank you in advance!
deasly said:
I load download mode and install new ROM via Odin, but the same thing happened - everything is ok, the ROM is installed successfully, I see the starting screen with Samsung logo, but that's all. It doesn't want to start - I wait, and wait, and nothing.
Click to expand...
Click to collapse
At This Stage, You should enter into recovery mode (hope you know key combination) and do a factory reset.
Enter Download Mode->Flash Stock Ics via odin->enter into recovery->do Factory Reset It should boot then..
To Avoid Confusion, remove your 32Gb memory card and do flashing.
Hope it Helps..
Solved!
Nikhil said:
At This Stage, You should enter into recovery mode (hope you know key combination) and do a factory reset.
Enter Download Mode->Flash Stock Ics via odin->enter into recovery->do Factory Reset It should boot then..
To Avoid Confusion, remove your 32Gb memory card and do flashing.
Hope it Helps..
Click to expand...
Click to collapse
Many thanks!! ))))))
Nikhil said:
At This Stage, You should enter into recovery mode (hope you know key combination) and do a factory reset.
Enter Download Mode->Flash Stock Ics via odin->enter into recovery->do Factory Reset It should boot then..
Click to expand...
Click to collapse
This is not a good idea. Stock recovery and ICS both have brick bug in kernels.
Sent from my GT-I9103
Adam77Root said:
This is not a good idea. Stock recovery and ICS both have brick bug in kernels.
Click to expand...
Click to collapse
yes.both have brick bug in kernels.
whenever i installed stock ics via odin after installing custom rom, my phone entered into bootloop. it stuck to samsung logo.
since stock recovery doesnt come up with more options, only thing i could do was factory reset and it booted then, hence suggested.
Are following steps safe?
-flashing stock ics
-flashing cwm 4.0.0.2 via odin
-factory reset
-reboot
if not then, what is the safe solution?
Nikhil said:
yes.both have brick bug in kernels.
whenever i installed stock ics via odin after installing custom rom, my phone entered into bootloop. it stuck to samsung logo.
since stock recovery doesnt come up with more options, only thing i could do was factory reset and it booted then, hence suggested.
Are following steps safe?
-flashing stock ics
-flashing cwm 4.0.0.2 via odin
-factory reset
-reboot
if not then, what is the safe solution?
Click to expand...
Click to collapse
Flash ardatdat kernel after CWM & then do factory reset.
Disturbed™ said:
Flash ardatdat kernel after CWM & then do factory reset.
Click to expand...
Click to collapse
This! ^
Sent from my GT-I9103
Adam77Root said:
This! ^
Sent from my GT-I9103
Click to expand...
Click to collapse
What if this kernel doesnot exist on sdcard. AKAIK only way to flash this kernel is through recovery like CWM,philZ, (installing from sdcard).
when i faced this problem, i didnt have ardatdat's kernel zip file in sdcard.
Nikhil said:
What if this kernel doesnot exist on sdcard. AKAIK only way to flash this kernel is through recovery like CWM,philZ, (installing from sdcard).
when i faced this problem, i didnt have ardatdat's kernel zip file in sdcard.
Click to expand...
Click to collapse
You can push it using adb or mount USB storage and move it.
Hello all,
Last night I was trying to install the latest Gummy release on my Verizon Galaxy S3. This was the first time I have tried to flash a rom on this phone. It failed, and I rebooted my phone, and now it will only boot into the clockwork recovery.
I thought it may have been damaged as i was transferring the file to the device. I had an SD card in my droid X, So I put it in my Galaxy and formatted it with clockwork. Then I transferred the gummy release (that I also re-downloaded) from my computer to the SD card via a memory card reader. I put it in my Galaxy and tried to install the release, and it gave me a different error
Code:
E: Can't Open /external_sd/Gummy-2.1-01-09-14-NIGHTLY-d2vzw.zip
(bad)
Installation aborted.
Edit: Tried a few other roms and they had the same issue, but Cyanogen Mod 10.2 worked. Anybody have any guesses why?
Edit2: Further developments, Trying to do the latest nightly fir the CM yields the same issue that Gummy's release gave me initially. It reports as follows:
Code:
E: Error in /external_sd/cm-11-20140110NIGHTLY-d2vzw.zip
(Status 7)
Installation aborted
Is there possibly a firmware issue at play?
Did u unlocked ur recovery. And if ur trying to flash a KITKAT rom u need the latest clockwork recovery
I'm having this exact issue except I currently have TWRP 2.6.3. I wiped data, cache and internal and it actually booted the below ROM (the first boot) but once I got everything setup and rebooted the device it will not boot beyond recovery. It hangs on the Samsung boot logo. I've tried to restore to a 4.1.2 ROM as well as install 4.3 and 4.1.2 again multiple times but they will not boot. Any direction would be appreciated.
http://forum.xda-developers.com/showthread.php?t=2601536
twistedillutions said:
Did u unlocked ur recovery. And if ur trying to flash a KITKAT rom u need the latest clockwork recovery
Click to expand...
Click to collapse
Sorry, forgot to mention, I did unlock with EZunlock. Would the clockwork on the play store be the latest one, or is there another place with more up to date versions?
Cappurnikus said:
I'm having this exact issue except I currently have TWRP 2.6.3. I wiped data, cache and internal and it actually booted the below ROM (the first boot) but once I got everything setup and rebooted the device it will not boot beyond recovery. It hangs on the Samsung boot logo. I've tried to restore to a 4.1.2 ROM as well as install 4.3 and 4.1.2 again multiple times but they will not boot. Any direction would be appreciated.
http://forum.xda-developers.com/showthread.php?t=2601536
Click to expand...
Click to collapse
Do you get the same error on install that I'm getting, ro are the installs finishing, but not booting?
Try goo manager or ez-recovery to install the latest recovery
right now i can think of
factory reset format data. Make sure u backup ur internal
Wen changing from rom to rom is a good thing to do a clean install
get the right gapps.
The 1st boot always takes time at least on me.
Sorry i cant think of more helpful things.. Been drinking
Looks like my recovery just needed an update. Thanks everyone.
Sent from my Nexus 7 using Tapatalk
Confirmed also an old recovery for me as well. Thank you very much!
Hi i m rooted and having 4.3 stock rom with cwm custom recovery. My question is that i tried to flash an official OTA Update i downloaded through software update but when i tap on install update my phone reboots into recovery it has red exclamation sign an some logs appears but it so quick that i cant see what it says and my phone reboots and its again on 4.3 rom. Nothing is updated need help please what to do?
creepin said:
Hi i m rooted and having 4.3 stock rom with cwm custom recovery. My question is that i tried to flash an official OTA Update i downloaded through software update but when i tap on install update my phone reboots into recovery it has red exclamation sign an some logs appears but it so quick that i cant see what it says and my phone reboots and its again on 4.3 rom. Nothing is updated need help please what to do?
Click to expand...
Click to collapse
I have similar problem, my mini have stock 4.3 android, in taskbar apear update icon, i touch update now, system is reboot and start teamwin recovery mode??? i try instal from the zip in recovery i choise instal, (which system download, OTA_M4_UL_K44_SENSE55_MR_Orange_UK_3.12.61.4-2.12.61.3_release_385802) and phone show me some fail and when i reboot phone i start i have old android and old sense? how i update my phone? where is problem? i never istal unoficial rom to phone, phone is buy from amazon.
Look at this: http://forum.xda-developers.com/htc-one-mini/help/ota-t2831640
problem
Ou, I had i litle mistake, in recovery I wipe all (dalvic cache, cache, data, internal storage, system, external storage)
and in advaced seting I choise HTC Dumlock and restore original boot, now, when i power phone, htc show only logo on the white backroud, what i will do now? How I start android system again? thaks for yours reply
Hi guys,
Yesterday I was about to install a new rom (cm-11.0.0-GT-S5670-beni) on my Galaxy FIT , so I did a factor reset , then installed CWM 5 and then upgraded it to CWM 6.
after this I chose Install from sdcard and i chose zip file of ROM from SDCard. all fine up to here, but after installation is complete, the phone could not boot correctly, it booted to CWM again and again i powerd it off,reboot,factory reset, ... but was unable to get rid of CWM. finally i decided to format /System,So i did and the problem occurred here; now i can't boot to anything! even CWM or stock recovery or etc.
I used Odin to install CWM5 / CWM4 again and again (successfully done) but nothing changed.
fortunately I can get into download mode and Odin detects my phone but not Kies.
is there anyway to get my phone back to life?!
Thx...
mehdi98 said:
Hi guys,
Yesterday I was about to install a new rom (cm-11.0.0-GT-S5670-beni) on my Galaxy FIT , so I did a factor reset , then installed CWM 5 and then upgraded it to CWM 6.
after this I chose Install from sdcard and i chose zip file of ROM from SDCard. all fine up to here, but after installation is complete, the phone could not boot correctly, it booted to CWM again and again i powerd it off,reboot,factory reset, ... but was unable to get rid of CWM. finally i decided to format /System,So i did and the problem occurred here; now i can't boot to anything! even CWM or stock recovery or etc.
I used Odin to install CWM5 / CWM4 again and again (successfully done) but nothing changed.
fortunately I can get into download mode and Odin detects my phone but not Kies.
is there anyway to get my phone back to life?!
Thx...
Click to expand...
Click to collapse
Hello again!
finally I restore the phone!
I installed default ROM 2.3.6 from Sammobile by Odin and now phone got back.
now I am going to install cm-11.0.0 again!
:*:victory:
mehdi98 said:
Hello again!
finally I restore the phone!
I installed default ROM 2.3.6 from Sammobile by Odin and now phone got back.
now I am going to install cm-11.0.0 again!
:good:
Click to expand...
Click to collapse