Related
Android 4.3 Jellybean for Defy and Defy+
Gapps: http://forum.xda-developers.com/showthread.php?t=2296931
Download Link: http://quarx2k.ru/cm10.2-nightly-defy+/
Mirror: http://d-h.st/users/Quarx/?fld_id=22062#files
http://defy.bytekiste.de/
Version for Motorola Bravo: http://quarx2k.ru/cm10.2-nightly-bravo(kobe)/ + mirror http://d-h.st/users/Quarx/?fld_id=22063#files
Problems
30.07.13: First Build. Works almost all.
01.08.13: Fix "Unknown" bug. Fix 1% battery. Dialer included, VideoEditor removed.. Backup gapps disabled(to prevent reboots during install rom).
17.09.13: Focal Restored, Ability to OC GPU(without gui yet), added patch for Data, DefyParts, 720p rec(bugged), Support HWUI app, Minimum brightness 2, Wide poho added.
20.10.13:720p rec, Fix HWUI app, use thoemy wpa_supplicant, Call Recording, LTO support, many fixes and improvements in kernel, gpu 266mhz by default, Fix arrows that indicate upload/download activitiy at Wifi and mobile connections.
30.10.13: Fixes in kernel, Added two new options for ril "emptycallchanges" and"skipdatareg" (disabled by default), journal on ext enabled by default, fix reboots in recovery(not tested), updated twrp.
BT headset not fixed
GPU Freqs:
266666666 = 266mhz OCed.
200000000
133333333
100000000
66666666
33333333
16666666
echo %freq% > /proc/gpu/max_rate
3.0.8 kernel Project:
USB, Wifi, BT, Sound(Only speaker), GPS, Phone(ussd/sms/data), Full HW Video decoder(720p also), initial OTG support.
TODO:
1. Improove sound lib (support headset, bt-headset, in-call sound etc)
2. Improove stablity of kernel().
3. Need check voltage formula for cpu
4. Add camera drivers, (from moto or opensource driver?)
5. Fix otg.
6. Fix proximity sensor(cause reboots)
Screenshots
Test Builds
Click to expand...
Click to collapse
If you liked this project, you can donate
Donate to Quarx
PayPal: [email protected]
---------------------------------------
Donate to Blechd0se
PayPal: [email protected]
Click to expand...
Click to collapse
F.A.Q
Thanks Quarx!
Which gapps should we use? At goo.im aren't gapps for 4.3
Gesendet von meinem MB526 mit Tapatalk 2
I don't see any official nightlies or betas/alphas CM10.2 for even Nexus 4...but we already have a build? Hah who needs official! And no gapps it seems, I'll see if I can get it from the stock dump somewhere..
Okay Nexus 4 has an unofficial CM10.2 too, here.
Also gapps for 4.3, this might work for now?
EDIT: Okay slimmed it down from some 170MB down to around 19MB as it now replaces the keyboard in the ROM with one where swipe works without crashing it. Once the ROM's keyboard is fixed my gapps can go back down to around 9MB here
WoW, it really comes!! Thanks very much!!
its the same gapps at 4.2.2 ?
Thanks
So it begins... downloading now! Will report soon. Thanks again Quarx, you seriously rock.
Great! So, if the are no new hard to fix bugs, I hope that Bluetooth can be eventually fixed so I can move from cm10.
Sent from my Nexus 7 using xda app-developers app
STATUS 0 Installation aborted ..
what problem might be ??
m installing with cwm.
Shubhamqweasd said:
STATUS 0 Installation aborted ..
what problem might be ??
m installing with cwm.
Click to expand...
Click to collapse
Old CWM not support new update-binary.
Only CWM 6.x or TWRP works
To add to @TJKV Gapps suggestion
Another one here ---> http://forum.xda-developers.com/showthread.php?t=2378992
@Quarx is the new Focal camera included?? Would it conflict with the Camera in the Gapps package?
By the way, I took a look at the size, it's 184MB for this nightly, quite big for our limited system partition. We started having problems with cm10.1 already having to resort to minimal gapps, to successfully install cm10.2 plus gapps (when gapps are officially released) will require a considerable butchering of the .zip.
Sent from my Nexus 7 using xda app-developers app
@Kayant, Focal camera included. Don't know about conflict.
@ccav2000, By default it's 192mb, i removed some video files in media. in next builds i'll try reduce size of build.
Kayant said:
To add to @TJKV Gapps suggestion
Another one here ---> http://forum.xda-developers.com/showthread.php?t=2378992
@Quarx is the new Focal camera included?? Would it conflict with the Camera in the Gapps package?
Click to expand...
Click to collapse
Hmm yeah, but looks like mine is the minimal version as usual
But I'll download this first to make sure we don't miss anything. Then I'll see if I can make a proper defy worthy minimal version...
Looks like I ran out of thanks to give out for today just before Quarx opened this thread, and my defy is in a limbo testing SB so can't use the xda app -_-
Kayant said:
To add to @TJKV Gapps suggestion
Another one here ---> http://forum.xda-developers.com/showthread.php?t=2378992
@Quarx is the new Focal camera included?? Would it conflict with the Camera in the Gapps package?
Click to expand...
Click to collapse
Focal is included, I can see it among other apks in the /app/ folder Haven't tested it just yet, though, will flash soon!
Quarx, thank you! For keeping the DEFY updated for such a long time... Thank you, thank you, thank you! :victory:
Quarx said:
Old CWM not support new update-binary.
Only CWM 6.x or TWRP works
Click to expand...
Click to collapse
flashed with twrp , rebooted in middle of flash ..
had to flash sbf again , agn flashed with twrp and again it rebooted in middle of a flash ...
now again flashing sbf
man i hate twrp recovery ...
is there any cwm 6.x for defy ??
This guy is just awesome! hahaha
No limits for defy, thanks @Quarx
@Shubhamqweasd
this comes with the new CWM flash this with an old one or TWRP
(touchbootmenuV2.0beta_multibootV0.8-20120829-signed.zip)
http://forum.xda-developers.com/showthread.php?p=19737327
Shubhamqweasd said:
flashed with twrp , rebooted in middle of flash ..
had to flash sbf again , agn flashed with twrp and again it rebooted in middle of a flash ...
now again flashing sbf
man i hate twrp recovery ...
is there any cwm 6.x for defy ??
Click to expand...
Click to collapse
When you enter TWRP, wait a while before you do anything :laugh: Go through the menus a bit and if it doesn't reboot in ~20secs it most likely won't reboot until you tell it to That's my strategy with TWRP, at least, and it serves me well that way
Can I install 4.3 without factory reset/data wipe over 4.2.2 (Quarx's CM10.1 July 9 build?)
Before anyone sneers at me for being a n00b, let me hasten to clarify that I did install 10.1 - when it first came out - over CM 10 without a factory reset and my Defy managed to work fine from then to now (in fact I had a lot fewer problems than most people who were reporting).
What is more, a few days ago when I decided to factory wipe and install one of the July builds afresh, I ran into so many problems that I had to restore a nandroid backup and go back to my non-factory-wiped state.
So, can I? Has anyone done it?
Oh, and Quarx, you defy belief, man.
Hi
Thanks to Temasek and webdroidmt for info, native USB OTG works again.
Thanks to NetFluke, who managed to implement Timur Merhvarz patches, we have DAC hotplug support with volume adjustment. NetFluke also made kernel with OTG charging.
New 4.4.2 works really really smooth, ART and built in Superuser work.
How to install:
1. Reboot into recovery (I use TWRP 2.6.3.0)
2. Select advance wipe: dalvik cache, system, cache and data. Basically everything except internal storage. Just in case
3. Flash rom and gapps
4. Wipe dalvik cache and cache
5. Reboot
How to enable ART:
1. Select settings
2. Tap 7 times build number to enable developers options
3. In developer options tap on runtime and select ART
4. Reboot and wait
I recommend to enable ART before install any new applications. Works for me since rom is built.
Links:
All builds are here, just take the latest. 4.4.2 builds are in 442 sub folder. For rom with USB DAC support look here.
Gapps compatible with ART:
gapps-proper-art
Recently I use minimal gapps (playstore, syncing apks and libs, AOSP calendar sync) from here. I don't really need face unlock, Google now, search, etc. But you should be fine with full gapps. You can find two flashable gapps which I use here.
Gapps partially compatible with ART:
gapps-kk-20131119.zip
gapps-kk-20131119.zip - mirror
gdrive mirror for all files
If you wish to try CyanogenMod Screencast:
- first join the CyanogenMod community
- then download CyanogenMod Screencast
I have Linux laptop dedicated for development and plan is to make clean build every few days or when CM team submit noticeable changes, test on my device, upload and post a link.
Changelog:
- search is not force closing anymore
- Newsstand works
- lock screen shortcuts
- expanded desktop
- buttons and layout
- quick launch shortcuts
- fn buttons
- more options in Interface menu (battery percentage...)
- OTG support
- DAC support
- OTG charging support with separate kernel
About ART, if someone haven't read already. May experience is exactly the same, a bit slower installation or first application start, much smoother later.
In case that something went wrong, you can restore dalvik without wipe:
$ su
# echo -n libdvm.so > /data/property/persist.sys.dalvik.vm.lib
# reboot
Huge thanks to fattire for his guide and patient answers and of course to the CM team.
Old builds:
gdrive mirror for all files
What's the difference between this and CM11
Sent from my Nexus 7 using xda app-developers app
DroidRunner said:
What's the difference between this and CM11
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
For now, no difference. Just another CM11 unofficial build. You may try this one, from someone else or build your own.
First I built for my self then realize that some users have problems with other builds. To avoid off topic or giving support for something I didn't test, I made decision to open new topic and share my builds here.
New build is made over night but didn't have time to flash and test. Will do after work.
DroidRunner said:
What's the difference between this and CM11
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
There is no official CM11 so what r u comparing this to? And AFAIK, there are very few unofficial builds as well.
Sent from my Nexus 7 using xda app-developers app
bhu1 said:
There is no official CM11 so what r u comparing this to? And AFAIK, there are very few unofficial builds as well.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
The one by Koko98.
Sent from my Nexus 7 using xda app-developers app
DroidRunner said:
The one by Koko98.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
His name is koko98, his latest build is two days old and has some problems.
Sent from my Nexus 7 using xda app-developers app
bhu1 said:
His name is koko98, his latest build is two days old and has some problems.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
:screwy: Yes I know what his name is....
But I'll keep an eye on this thread.
Sent from my Nexus 7 using xda app-developers app
Yeah, waiting for new build cause the one in the op is 4 days old. Happy to see any kind of unofficial build available for nexus 7 cause there doesn't seems to be an official one on the way anywhere.
Sent from my Nexus 7 using xda app-developers app
Fresh new build, CM repo synced today. Tested on my device for about one hour (super user, art...), no visible changes. Link is in the fist post.
I cleared all cache and out directory for building tomorrow.
bhu1 said:
His name is koko98, his latest build is two days old and has some problems.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
What problems?
Enviado desde mi LT30p mediante Tapatalk
koko98 said:
What problems?
Enviado desde mi LT30p mediante Tapatalk
Click to expand...
Click to collapse
Well, some crashes and stuff with system UI and some reboots. Hoping that latest source might have some of that fixed.
Sent from my Nexus 7 using xda app-developers app
New build is up and running on my devices. Repo synced in the middle of night after great rock concert, building finished in the morning (my local time).
Work everything I tested, including ART, super user, RayMan and search is not FC any more or anything else.
Edit: Newsstand works fine.
Zeljko1234 said:
New build is up and running on my devices. Repo synced in the middle of night after great rock concert, building finished in the morning (my local time).
Work everything I tested, including ART, super user, RayMan and search is not FC any more or anything else.
Edit: Newsstand works fine.
Click to expand...
Click to collapse
Downloading ^_^
Отправлено с моего Nexus 7 при помощи Tapatalk
The latest ROM is failing to install. Using twrp 2.3.6.1, it just says installation failed. Redownloading the ROM.
Sent from my Nexus 7 using Tapatalk
bhu1 said:
The latest ROM is failing to install. Using twrp 2.3.6.1, it just says installation failed. Redownloading the ROM.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
I use latest build all day today, maybe broken download or upload. Here is md5: e0f04a7d31a12e80f10a6238cc6851e2
Let me know if is broken and I'll upload again.
Zeljko1234 said:
I use latest build all day today, maybe broken download or upload. Here is md5: e0f04a7d31a12e80f10a6238cc6851e2
Let me know if is broken and I'll upload again.
Click to expand...
Click to collapse
This md5 is different from the one of the file I downloaded. Redownloading the file and will try to re install.
Sent from my Nexus 7 using Tapatalk
In mean time, I'm uploading file again. Build works really great
Zeljko1234 said:
I use latest build all day today, maybe broken download or upload. Here is md5: e0f04a7d31a12e80f10a6238cc6851e2
Let me know if is broken and I'll upload again.
Click to expand...
Click to collapse
I downloaded earlier, but have not had a chance to install yet. I got that md5.
Zeljko1234 said:
In mean time, I'm uploading file again. Build works really great
Click to expand...
Click to collapse
I redownloaded and this time the md5 matches the one u posted. Really excited to flash this one, finally a fc free/ stable pure cm11 ROM. Thanks. Btw, u might wanna add the pa gapps link, its on their site, its 245 mb and has all apps and works great.
Sent from my Nexus 7 using Tapatalk
Thank you all for info. I also downloaded and md5 is fine. Anyway, just in case I will continue upload to dropbox.
Gapps, linked in first post, work with ART and I prefer smaller version. I can link also 245MB version but could you confirm that works with ART?
P.S.
I setup everything on my machine and new build is done much quicker now.
Hey all....
Which is the most stable lollipop ROM for tab 2?
And what are the bugs there in current cm12.1 builds....
Pls help...ty
Sent from my GT-P3100 using XDA Free mobile app
Droidlover123 said:
Hey all....
Which is the most stable lollipop ROM for tab 2?
And what are the bugs there in current cm12.1 builds....
Pls help...ty
Sent from my GT-P3100 using XDA Free mobile app
Click to expand...
Click to collapse
imho SlimLP is the best...
http://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-slimlp-t2969112
http://209.95.39.164/SlimLP/p3100/
seagman said:
imho SlimLP is the best...
http://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-slimlp-t2969112
http://209.95.39.164/SlimLP/p3100/
Click to expand...
Click to collapse
Any bugs on slim ROM??
Am currently on blisspop!
Sent from my GT-P3100 using XDA Free mobile app
I use it from months and there are almost no bugs...
seagman said:
I use it from months and there are almost no bugs...[/QUOTE}
What build of SlimLP are you using and what device ? I have P3110 and get a boot loop after I reboot on alpha 0.41
I haven't tried to capture logs yet - next step will be to wipe and redo a clean flash ; on the other hand - I noticed the link in the xda thread notes 0.41 as latest - but AndroidAndi's link to his files shows latest as 0.3 ; know it is an alpha - but looking for stability over new features if I can get it
Click to expand...
Click to collapse
stevejohnson42 said:
seagman said:
I use it from months and there are almost no bugs...[/QUOTE}
What build of SlimLP are you using and what device ? I have P3110 and get a boot loop after I reboot on alpha 0.41
I haven't tried to capture logs yet - next step will be to wipe and redo a clean flash ; on the other hand - I noticed the link in the xda thread notes 0.41 as latest - but AndroidAndi's link to his files shows latest as 0.3 ; know it is an alpha - but looking for stability over new features if I can get it
Click to expand...
Click to collapse
I use alpha 0.41 on P5110. It might take up to half an hour to first boot after flash... be patience...
Click to expand...
Click to collapse
seagman said:
stevejohnson42 said:
I use alpha 0.41 on P5110. It might take up to half an hour to first boot after flash... be patience...
Click to expand...
Click to collapse
thanks for info - my mistake in describing it ; it kept rebooting - however, last night did a wipe - then reflashed ; no issues. I don't remember all the steps I did the first time - quite possible I did a dirty flash. Starting with a clean device did the trick.
I may go back and mess with it more now that i have it stable -- as it was ; I made a back up and went back to the SlimKat setup I had been using -- device is still used daily as a primary device - but now I have a setup to mess with when I have some free time
Click to expand...
Click to collapse
WELCOME
This thread is about official LineageOS 14.1 for our beloved
Galaxy S5 Duos (SM-G900FD/MD).
SM-G900FD/MD
Samsung Galaxy S5 Duos
(klteduosxx)
You're welcome to report and share experiences and certain issues.
Downloads
Official LineageOS 14.1 Nightly Builds:
https://download.lineageos.org/klteduos
GAPPS-Download
(plz try by yourself)
http://opengapps.org/
Official changelogs:
https://download.lineageos.org/klteduos/changes/
Installation
1. be sure you have a custom recovery like TWRP (I use v3.0.0.0 for klte) or similar
Everyone using those Nightly's is advised to use TWRP 3.0.0.0 for SM-G900F only!!!
Wipe/Clear data/cache function is not working in TWRP 3.0.2.1 and higher!!!
2. download desired NIGHTLY and GAPPS via link from above
3. put files on your SD-card and enter recovery mode via 3 button-combo or extended menu
3. wipe data/cache/dalvik, format system
4. flash Nightly
5. flash GAPPS (if Aroma is faster than 10 seconds, flash again. Aroma full installer aborts atm)
6. wipe cache/dalvik again (optional)
7. restart and have fun with your NIGHTLY
Note: This is not a development thread. All credits are on CM and Xposed devs
Okay guys,
here's my report for the nightly from 10th of August.
As I can say, everything is working soft and properly except of some small issues:
- multi-user-profiles are not adjustable
When I try to set a picture or change the account name a toast-message with "contact does not exist" appears. Profiles are shown as "Owner", "New User" and "Guest".
- when in 2nd user-account sometimes new installed apps are force closed
First time I noticed this, was when installing the new user-account, google framework had a fc, but afterwards everything worked great.
Second fc was on installation of SwiftKey Keyboard. To use it, I had to switch back to "owner", then the Keyboard is shown in the options
- Bluetooth music play on my car is stuttering, when phone is in use, f. e. when radar control app is in background. BT phone was fine in my car, but I read about other users, who had the same issues with their headsets.
Thats all so far.
I hope we can start a little discussion on your experiences and faced problems.
It will be great if someone can find an official way to report issues directly to the builders of this ROM.
However, the progress of development of this ROM is remarkable!
Sent from my SM-G900FD using XDA Free mobile app
No fingerprint security
Hey,
just tried this ROM and its so awesome, but there is no fingerprint option in security
any ways to bring fingerprint lock in CM?
Suriya.sXe said:
Hey,
just tried this ROM and its so awesome, but there is no fingerprint option in security
any ways to bring fingerprint lock in CM?
Click to expand...
Click to collapse
As you can read here its a known issue that is related on missing drivers for the button sensor. So waiting is the only option that us non-developing-skills-blessed-users will have.
ottili81 said:
WELCOME
I decided to open up a thread for the CM 12.1 Nightly's of our beloved
SM-G900FD
Samsung Galaxy S5 Duos
(klteduos)
Since there is no possibility to report and share certain issues and experiences,
I hope some people will gather here to do so.
Downloads
Official CM 12.1 Nightly Builds:
http://download.cyanogenmod.org/?device=klteduos
GAPPS from GitHub
https://github.com/cgapps/vendor_google/tree/builds/arm
Official changelogs:
http://www.cmxlog.com/12.1/klteduos/
Installation
1. be sure you have a custom recovery like TWRP
2. download desired NIGHTLY and GAPPS via link from above
3. put files on your SD-card and enter recovery mode via 3 button-combo or extended menu
3. wipe data/cache/dalvik, format system
4. flash Nightly
5. flash GAPPS
6. wipe cache/dalvik again (optional)
7. restart and have fun with your NIGHTLY
Note: This is not a development thread. All credits are on CM devs
Click to expand...
Click to collapse
Thanks, Nice Rom. Working fine except that video cam features missing, sometimes reboot itself. Overall excellent working, worth daily use
naveed1321 said:
Thanks, Nice Rom. Working fine except that video cam features missing, sometimes reboot itself. Overall excellent working, worth daily use
Click to expand...
Click to collapse
Yes you're right.
The CM Camera is stripped down to the bones very much. Just use third-party-apps like open camera or original google camera instead to more features. There's another project called Camera Next which is a port from the OnePlusOne. You'll find it on XDA.
Sadly, they all are not as capable as the Samsung Cam, but for a quickshot, they're fine.
THX for your report.
Anyone know how to get separate icon in status bar when using mobile data like the 4G and H+ icons?
Sent from my SM-G900FD using XDA Free mobile app
Sent from my SM-G900FD using XDA Free mobile app
Suriya.sXe said:
Anyone know how to get separate icon in status bar when using mobile data like the 4G and H+ icons?
What do you mean with separate icons? Do you think about data traffic arrows? My icons are changing from H, H+ to LTE as they should.
Sent from my SM-G900FD using XDA Free mobile app
Click to expand...
Click to collapse
Low mic gain
Sent from my SM-G900FD using Tapatalk
Low mic gain
Hi all,
When I'm recording video or voice the sound is very very low. Anyone with the same problem?
Thanks
Sent from my SM-G900FD using Tapatalk
chanur_000 said:
Low mic gain
Hi all,
When I'm recording video or voice the sound is very very low. Anyone with the same problem?
Thanks
Sent from my SM-G900FD using Tapatalk
Click to expand...
Click to collapse
Which app do you use for video recording?
Sent from my SM-G900FD using XDA Free mobile app
Stock and htc m9 port
Sent from my SM-G900FD using Tapatalk
ottili81 said:
Suriya.sXe said:
Anyone know how to get separate icon in status bar when using mobile data like the 4G and H+ icons?
What do you mean with separate icons? Do you think about data traffic arrows? My icons are changing from H, H+ to LTE as they should.
Sent from my SM-G900FD using XDA Free mobile app
Click to expand...
Click to collapse
Yes, but as you can see I only see the arrows and not the LTE indicator, I think may be its because my sim is on roaming.
Sent from my SM-G900FD using XDA Free mobile app
Click to expand...
Click to collapse
Suriya.sXe said:
ottili81 said:
Yes, but as you can see I only see the arrows and not the LTE indicator, I think may be its because my sim is on roaming.
Sent from my SM-G900FD using XDA Free mobile app
Click to expand...
Click to collapse
Yeah Roaming is overwriting the displayed letter. Get back home and this will be fine!
Sent from my SM-G900FD using XDA Free mobile app
Click to expand...
Click to collapse
Hi, Thanks for the Rom. It works great. I am just facing one issue.
I had Philz touch recovery and after I installed this rom, its seems like the phone isnt rooted anymore. I tried updating the recovery to latest TWRP and it didnt work and also to CM recovery, that also didnt work. Any suggestions to get the root back?
Thanks,
Lalit
deadnight.warrior said:
Hi, Thanks for the Rom. It works great. I am just facing one issue.
I had Philz touch recovery and after I installed this rom, its seems like the phone isnt rooted anymore. I tried updating the recovery to latest TWRP and it didnt work and also to CM recovery, that also didnt work. Any suggestions to get the root back?
Thanks,
Lalit
Click to expand...
Click to collapse
Hi,
first have a look in developer settings and switch on systemwide root access. Sometimes it get lost when flashing a new recovery. I use the TWRP 2.8.6.0 recovery. It is not buildt for the S5 duos, but it works perfect. With this recovery I never lost root access by flashing a new ROM.
BTW, CM provides a custom recovery since the Nightly 13th of August. Anyone tried this?
Please report back.
ottili81 said:
Hi,
first have a look in developer settings and switch on systemwide root access. Sometimes it get lost when flashing a new recovery. I use the TWRP 2.8.6.0 recovery. It is not buildt for the S5 duos, but it works perfect. With this recovery I never lost root access by flashing a new ROM.
BTW, CM provides a custom recovery since the Nightly 13th of August. Anyone tried this?
Please report back.
Click to expand...
Click to collapse
Hey buddy,
Thanks a ton. That did work like a charm. Now it's rooted Last recovery I flashed, was CM Custom recovery, the latest one. it does work, but honestly I havent used it that much. Just booted once.
Thanks again for the help. You're a saviour
Cheers,
Lalit
chanur_000 said:
Stock and htc m9 port
Sent from my SM-G900FD using Tapatalk
Click to expand...
Click to collapse
Facing the same issue but its not this massive. just my opinion. If you like testing to get Xposed working for our Duos variant with CM 12.1 u r able to set new volume specs with V4A.
Pls report back.
...but as seen, getting Xposed working is easy, Viper 4 Android is not!
Another bug, Bluetooth disconnected and connected for few seconds randomly and shutter while audio playing. Any temporary fix please. Thanks.*
Sent using my SM-G900FD running CM12.1
As many of you know i don't have a Note2 anymore, as a result of that don't expect me to shoot bugs/update the rom .
This work is made by me for a friend who asked to make a stable MIUI8 for his note and so here we are.
I thought some of you may want to use it. It's very stable.
Why not MIUI9?
Well, I need a note2 or testers and other than that i have to download the source which is +60Gb and my ISP is crap so i have to pay fortune to be able to download it.
Changelog
- Removed Chinese Apps
- New Kernel
- Added New Codes
- Added Some MIUI9 Codes
Bugs
Front camera doesn't work (fix by using other app)
Installation Steps
FOR N7100 ONLY!
- Download and install the latest version of CWM or Phliz Recovery
- Put the ROM in the phone "internal memory" or "external memory"
- Do a Full Wipe: Data/Cache/Preload/System...
- In Recovery Install (CWM or Phliz)/Install from zip file
- Select the ROM and install
- Restart and enjoy
DOWNLOAD
DO NOT USE MY FILES WITHOUT MY PERMISSION!!!
DropBox1
DropBox2
DropBox3
Pcloud
Custom GApps
XDA:DevDB Information
MIUI8, ROM for the Samsung Galaxy Note II
Contributors
RubbaBand, MIUI Team
ROM OS Version: 6.0.x Marshmello
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Galaxy Note2 N7100 - Custom Recovery
Based On: CyanogenMod, AOSP
Kernel source
Version Information
Status: Stable
Current Stable Version:
Stable Release Date: 2018-03-13
Created 2018-03-13
Last Updated 2018-03-13
Thank you man.
Great that you have came back.
Any one tried it?
hishamnoobie said:
Thank you man.
Great that you have came back.
Any one tried it?
Click to expand...
Click to collapse
I'm going to do it.
Thanks for the rom bro... If you asking for testers, there is no shortage of testers here in note 2 community.
hishamnoobie said:
Thank you man.
Great that you have came back.
Any one tried it?
Click to expand...
Click to collapse
Thx, good to see you again guys.
Gurkanwal Chauhan said:
Thanks for the rom bro... If you asking for testers, there is no shortage of testers here in note 2 community.
Click to expand...
Click to collapse
Thx, But testers are half the way, the other half is getting the source.
RubbaBand said:
Thx, good to see you again guys.
Thx, But testers are half the way, the other half is getting the source.
Click to expand...
Click to collapse
Will you try to fix front camera?
hishamnoobie said:
Will you try to fix front camera?
Click to expand...
Click to collapse
The person who made the camera app is a monkey. It's completely a mass.
And since i don't have an access to the source it will be hard to fix.
Using any other camera app should fix the problem.
download off?
haldson.parente said:
download off?
Click to expand...
Click to collapse
Unfortunately yes, we exceeded the daily quota.
I will upload another link soon.
Links are up.
Can we install it by using TWRP?
I could not install it with CMW. With Philz Recovery it was good.
I can not make Google app working. When I install gapps (nano) and do a wipe data, i get an error on boot.
When I don't wipe data, i got a connexion error when I configure my count.
rakesh1980 said:
Can we install it by using TWRP?
Click to expand...
Click to collapse
I didn't give it a try but i use Philz since day 1
Da_Mak said:
I could not install it with CMW. With Philz Recovery it was good.
I can not make Google app working. When I install gapps (nano) and do a wipe data, i get an error on boot.
When I don't wipe data, i got a connexion error when I configure my count.
Click to expand...
Click to collapse
1- Clean install the rom
2- After first boot power off your phone
3- Go to recovery and install "Pico" Gapps
4- Reboot
i face google account error.
haldson.parente said:
i face google account error.
Click to expand...
Click to collapse
Send logs and screenshots to pm
Me too got the same "google account error" with pico gapps after flashing rom ,then booted fully ,After shutting down and flashing pico gapps same message appeared with twrp 3.0.2.0.
Kc swarnkar said:
Me too got the same "google account error" with pico gapps after flashing rom ,then booted fully ,After shutting down and flashing pico gapps same message appeared with twrp 3.0.2.0.
Click to expand...
Click to collapse
I don't have a note, i need logs so i can fix it
RubbaBand said:
Send logs and screenshots to pm
Click to expand...
Click to collapse
i will do it.
Made a custom GApps, Link in OP
RubbaBand said:
Made a custom GApps, Link in OP
Click to expand...
Click to collapse
very thanks
can you replace china app off this rom by app of golbal rom?
ex: music, picture, video...
RubbaBand said:
Made a custom GApps, Link in OP
Click to expand...
Click to collapse
It works for me with your GApps. But you must start the ROM without GApps at first time. Then you restart the phone to install GApps.
If you install GApps just after the ROM, you got an error in the configuration at start just after Card SIM configuration.