after I rooted my phone and downloaded a bean rom it went to download screen( android working with a shovel ) and said do not reboot target but I did because it was just sitting like that for some time and now when I turn it on without usb it gets stuck at samsung logo and when I use usb cable it automatically shows a circle symbol as it is about to search for something but dosent do anything. I try to hold vol up plus vol down but it does the same thing. PLEASE HELPP
karandhanoa said:
after I rooted my phone and downloaded a bean rom it went to download screen( android working with a shovel ) and said do not reboot target but I did because it was just sitting like that for some time and now when I turn it on without usb it gets stuck at samsung logo and when I use usb cable it automatically shows a circle symbol as it is about to search for something but dosent do anything. I try to hold vol up plus vol down but it does the same thing. PLEASE HELPP
Click to expand...
Click to collapse
Read then read some more! Here is a good place to start http://forum.xda-developers.com/showthread.php?t=1437548 ,click the link in my signature then read. ALL of the info you need is in this forum if you will read.
Haaa welcome in the world of flashing custom roms and rooting as well ! You just softbrick your phone. It's not too hard to get it back to work. Just take a look around in the development section and give yourself some knowledge. You'll find all stuff you need to get back on track
Good Luck !
Related
Ok im new to this forums and ive had my sidekick for about a week and now it just stuck at
Y-mobile Sidekick4g
Samsung and
it just been like this for about 3 hours and
When i try to put in in recovery mode it doesn't work all it does is turn off and go right back to the same screen
Ive tired
Power + Vol down
And Power + vol up+ down
And its still not working tried taking the battery out still nothing
Took sd card out and sim card out nothing....
Plz help
Sounds like you need a trip to Dr. Odins office. You need to get into download mode; take the battery out, connect the phone via usb to the computer while pressing vol down + power + trackpad insert the battery. You should get a screen with a yellow triangle, from there, load the files into odin and flash.
Thx for the reply but now its stuck on the logo connect to pc ..
Shystep said:
Thx for the reply but now its stuck on the logo connect to pc ..
Click to expand...
Click to collapse
Dont worry. Plug it back into the pc. If odin recognizes your phone, you can still flash.
the odin app should be on and the the screen with the do not turn of target should appear first and also if u pull the phone out while its doing the odin u can try again althought this time ur will get a differen't screen to doin it
Ok thanks you guys lets hope it fixes my phone gotta wait 3 hours for this mofo to download
HI FELLOWS, JUST A HINT
here is the most easy and straight-forward way I discovered to unbrick or overcome any flashing error no matter what it is (it applies to lg o3d, and thrill 4G, I think it will apply to their fellows)
1-you must have drivers installed of-course
2-remove your battery
2-open your pc device manager and look at COM and PORT section
3-hold volume up button (only) and connect your mobile to pc through USB while pressing this button, and keep pressing until you see a new port has been added and installed in your COM and PORT section (about 15-20 sec), now you can release the button, be sure that port will stay apparent after releasing the button, or repeat this step (with longer press on volume up button)
4-put your battery back and don't touch your phone again
5-now start flashing by following these 2 tutorials in order:
a-http://forum.xda-developers.com/showthread.php?t=1473781
b-http://forum.xda-developers.com/showthread.php?t=1327929
after finishing reboot and enjoy
here's hope
Hey I just bricked,my phone yesterday. I was using rom manager when it just crashed and now I'm stuck at the LG screen. I really hope this works.
ehabb3 said:
HI FELLOWS, JUST A HINT
here is the most easy and straight-forward way I discovered to unbrick or overcome any flashing error no matter what it is (it applies to lg o3d, and thrill 4G, I think it will apply to their fellows)
1-you must have drivers installed of-course
2-remove your battery
2-open your pc device manager and look at COM and PORT section
3-hold volume up button (only) and connect your mobile to pc through USB while pressing this button, and keep pressing until you see a new port has been added and installed in your COM and PORT section (about 15-20 sec), now you can release the button, be sure that port will stay apparent after releasing the button, or repeat this step (with longer press on volume up button)
4-put your battery back and don't touch your phone again
5-now start flashing by following these 2 tutorials in order:
a-http://forum.xda-developers.com/showthread.php?t=1473781
b-http://forum.xda-developers.com/showthread.php?t=1327929
after finishing reboot and enjoy
Click to expand...
Click to collapse
Yes i use this method as well. i somewhat told the people in the thrill general section but not in as much detail as this.
Its a great fall back tool.
mind posting it on the thrill general section as well? thanks
akwhite23 said:
Yes i use this method as well. i somewhat told the people in the thrill general section but not in as much detail as this.
Its a great fall back tool.
mind posting it on the thrill general section as well? thanks
Click to expand...
Click to collapse
I don't mind, I already sent it, thanks
ehabb3 said:
HI FELLOWS, JUST A HINT
here is the most easy and straight-forward way I discovered to unbrick or overcome any flashing error no matter what it is (it applies to lg o3d, and thrill 4G, I think it will apply to their fellows)
1-you must have drivers installed of-course
2-remove your battery
2-open your pc device manager and look at COM and PORT section
3-hold volume up button (only) and connect your mobile to pc through USB while pressing this button, and keep pressing until you see a new port has been added and installed in your COM and PORT section (about 15-20 sec), now you can release the button, be sure that port will stay apparent after releasing the button, or repeat this step (with longer press on volume up button)
4-put your battery back and don't touch your phone again
5-now start flashing by following these 2 tutorials in order:
a-http://forum.xda-developers.com/showthread.php?t=1473781
b-http://forum.xda-developers.com/showthread.php?t=1327929
after finishing reboot and enjoy
Click to expand...
Click to collapse
thanks.. will try this in a few hours when i get home.. doesnt hurt to try something to un brick that piece of junk i have laying infront of my computer
Cyaneyed said:
thanks.. will try this in a few hours when i get home.. doesnt hurt to try something to un brick that piece of junk i have laying infront of my computer
Click to expand...
Click to collapse
Bricking and restoring from a bad flash are 2 completely different things, This method will restore from a bad flash it will not however recover a bricked phone.
You need to change the title to the following:
"How To Fix Bad Flashes And Softbricks"
Unbricking is not always possible.
It's only possible with a soft brick.
Hard bricks are obviously what they sound like. Paperweights. xD
Hey guys so umm I have a Samsung galaxy discover SGH-S730M and I flashed a wrong rom on it with CMW and when i rebooted it it just vibrates and shows the Samsung logo then turns of and does the same thing over and over again I tried connecting it to my computer but unfortunately it doesn't recognize anything like the computer doesn't recognize and neither does the phone react in any way... I also tried going into recovery mode to flash the stock rom but no luck it doesn't get any further than the Samsung logo and it just turns off I tried going into download mode to flash a rom with odin but that doesn't work either it just does the same thing.
PLEASE HELP ME I HAVE ALL MY IMPORTANT THINGS ON THIS DEVICE... ANY HELP WOULD BE HIGHLY APPRECIATED
Device Info:
Samsung Galaxy Discover SGH-730M.
Running on Android 4.0.4.
Rooted.
M.Ruben said:
Hey guys so umm I have a Samsung galaxy discover SGH-S730M and I flashed a wrong rom on it with CMW and when i rebooted it it just vibrates and shows the Samsung logo then turns of and does the same thing over and over again I tried connecting it to my computer but unfortunately it doesn't recognize anything like the computer doesn't recognize and neither does the phone react in any way... I also tried going into recovery mode to flash the stock rom but no luck it doesn't get any further than the Samsung logo and it just turns off I tried going into download mode to flash a rom with odin but that doesn't work either it just does the same thing.
PLEASE HELP ME I HAVE ALL MY IMPORTANT THINGS ON THIS DEVICE... ANY HELP WOULD BE HIGHLY APPRECIATED
Device Info:
Samsung Galaxy Discover SGH-730M.
Running on Android 4.0.4.
Rooted.
Click to expand...
Click to collapse
Download odin and stock rom files to flash with odin (make sure you use correct files or a brick will happen)
Shutdown the phone (if needed hold power button 10+ seconds until bootloop stops).
Plug phone into computer and turn the phone on and as the phone vibrates release the power button, then hold down the volume down button and home key. then follow onscreen instructions.
for flashing instructions please search the mobile section of these forums.
I followed all the intrusions given and the only thing that as changed is the cwm. its still stuck on the Samsung screen and not moving.
Q&A for [V1.3][Tool][All-In-One] Flash Recoveries , Downgrade , Bootloaders ...
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [V1.3][Tool][All-In-One] Flash Recoveries , Downgrade , Bootloaders .... If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
im having the same issue
culson_35 said:
Using this tool I could not get in fast mode ... and my phone is using the official ICS rom v30b .... help
LG P925 ICS 3D
Click to expand...
Click to collapse
could u tell me what u did to c the silver lg screen all i get is waiting for device and a black screen with the bottom button lit up
ryanrickard85 said:
could u tell me what u did to c the silver lg screen all i get is waiting for device and a black screen with the bottom button lit up
Click to expand...
Click to collapse
Have you installed OMAP drivers properly?
Open Device Manager on your PC and search for OMAP4430 (it connects and disconnects continuously) so, quickly double click on it and chose update driver. Select browse my computer for driver software > then go to usb_drv_windows folder in OS_HACKING tool then press Next. Wait till the driver installs.
After that, run the AIO Tool and follow onscreen instructions. You should now be able to enter Fastboot mode and flash your phone.
Dear Bro!
I've flashed, unbrick, made my Lg p920 dualboot several times before but now I have problem and need u advice.
Yesterday, when I was playing a game it suddenly turn off, and turn on to the lg logo and go off. At the first time I just think its the error came from the game so I tried to press power button to turn it on but no success.
After awhile I plug power cable in and the phone turned on and boot smoothly in to the ICS, but this time I realize that power button is not function anymore.
Up to now, My phone is:
Power button dont work.
If I want to turn it on I must plug the power cable in and It boot completely to the ICS(when I put in battery the phone is wake up and boot to lg logo and go off).
I tried to install Omap driver several time but no success, There isnt Lg United Mobile port in device manager to change the port to com41.
I cant boot in to flashmode to flash but can go to TWRP (via a software in android - restart to TWRP option)
My power button physically situation is good (I mode build.pro to wake my phone up by camera button 2 years ago and it work well up to now with no problem) Therefore, I think the problems should be errors in bootloader or kernel , xloader so I think if I could flash them via TWRP may be solve.
Could u please help me?
---------- Post added at 03:46 AM ---------- Previous post was at 03:43 AM ----------
Dear Bro!
I've flashed, unbrick, made my Lg p920 dualboot several times before but now I have problem and need u advice.
Yesterday, when I was playing a game it suddenly turn off, and turn on to the lg logo and go off. At the first time I just think its the error came from the game so I tried to press power button to turn it on but no success.
After awhile I plug power cable in and the phone turned on and boot smoothly in to the ICS, but this time I realize that power button is not function anymore.
Up to now, My phone is:
Power button dont work.
If I want to turn it on I must plug the power cable in and It boot completely to the ICS(when I put in battery the phone is wake up and boot to lg logo and go off).
I tried to install Omap driver several time but no success, There isnt Lg United Mobile port in device manager to change the port to com41.
I cant boot in to flashmode to flash but can go to TWRP (via a software in android - restart to TWRP option)
My power button physically situation is good (I mode build.pro to wake my phone up by camera button 2 years ago and it work well up to now with no problem) Therefore, I think the problems should be errors in bootloader or kernel , xloader so I think if I could flash them via TWRP may be solve.
Could u please help me?
XDA member Zogu made a thread quite a while ago. Here it is:
http://forum.xda-developers.com/showthread.php?t=2190261
There you will find Wkpark's bootloader as a flashable zip that you can flash in TWRP. You said that you are an experienced user so I take it that you can also find and flash a kernel compatible with your ROM.
To be honest, from your description, I don't think any of the above will help you (but you can try, if you want). I believe that your power button is stuck to "pressed" state. If you could spray it with some contacts cleaner while repeatedly pressing and releasing it, you might get it to work again.
won't get into fastboot
hay i have GB and i want to install wkparks bootloader , but the problem i couldn't get into fastboot i had fallowed the guide but at the end it dosn't show silver LG but the touch buttons is on and when trying to flash the bootloader just show waiting for device after selecting "flash bootloaders" , i'm on win7 64bit and using v1.3 .
photos in attachments shows what i get when trying to install the bootloader
so any help i'll by pleasured
Hi guys
Does anyone know what is the best course of action to revive an lg p920 running stock ICS and died after twrp 2.3.3.0 was flashed via twrp manager from the market.
The screen went black and phone completely dead now.
I just ordered a factory cable on eBay and wondering whether to flash kdz or is there another fix that I can flash to revive it?
Cheers..
Solved
Even with factory cable, windows 10 PC was my problem.
I flashed kdz on a different PC running windows 7 and all is working fine.
Hi, so i was trying to install the stock rom on my s7 that was running android 9 (and the power button is not working by the way, it was just pressed).
by doing this it removed the twrp recovery that i needed for going in download because if i have the button pressed and i go in download mode it cant click volume up to continue.
when it rebooted from the flashing it started to load the samsung logo for aroud 10 minutes, then it started saying that it was optimizing 39 apps but when it got on 39, the phone didnt reboot but reloaded the boot animation and with the led blue, it still done the same thing. so i just get the phone and reboot to recovery but something strange was happening, the blue led was still there.
after litteraly wait like all day to wait for this phone to turn off i turned it back on and the phone rebooted on recovery and it didnt want to boot to android. now i'm stuck with my phone that can go on dowload mode and recovery only and from the recovery it says on my pc that the phone/device its not reconized and i cant go anyway in download mode, only the triangle and adb does not work.
Anyone that can help me? i just need to go on download mode
go to mobile repair, i cant help with diy tricks
lentas said:
go to mobile repair, i cant help with diy tricks
Click to expand...
Click to collapse
I actually open it and i removed the power button cable and it's still has the same problem so i think the motherboard is the problem
Davitek_ said:
I actually open it and i removed the power button cable and it's still has the same problem so i think the motherboard is the problem
Click to expand...
Click to collapse
check that if motherboard is in amazon shop (i cant write best way of english language)
lentas said:
check that if motherboard is in amazon shop (i cant write best way of english language)
Click to expand...
Click to collapse
Ok, don't worry about your English I'm Italian instead
ok