Hi guys, I need your help.
I installed ClockWorkMod v6.0.1.9. I've done that with wkparts omaptools and fastboot. Any doubt, take a look at this:
http://forum.xda-developers.com/showthread.php?t=2045942
and this:
http://forum.xda-developers.com/showthread.php?t=1978543
Ok, thats fine, it worked. Now, when I boot into recovery mode (Holding VOLDOWN + 3D + Power) I get into ClockWorkMod.
So, I connect the USB cable in order to access the phone via ADB. But, when I look into device manager, there is a unknown device called "LGE COSMO USB Device" and I couldn´t figure out what driver I have to install. I installed LG United Driver and it didn´t work.
Any suggestion? Thks
adrianohck said:
Hi guys, I need your help.
I installed ClockWorkMod v6.0.1.9. I've done that with wkparts omaptools and fastboot. Any doubt, take a look at this:
http://forum.xda-developers.com/showthread.php?t=2045942
and this:
http://forum.xda-developers.com/showthread.php?t=1978543
Ok, thats fine, it worked. Now, when I boot into recovery mode (Holding VOLDOWN + 3D + Power) I get into ClockWorkMod.
So, I connect the USB cable in order to access the phone via ADB. But, when I look into device manager, there is a unknown device called "LGE COSMO USB Device" and I couldn´t figure out what driver I have to install. I installed LG United Driver and it didn´t work.
Any suggestion? Thks
Click to expand...
Click to collapse
Go to device manager and right klick on the unknown device and hit preferences.
there you go to tab details. there look for device instance path.
USB\VID_1004&PID_61FA&MI_04\6&301C001A&6&0004 == ADB
USB\VID_1004&PID_61FA&MI_02\6&301C001A&6&0002 == USB Serial Port
USB\VID_1004&PID_61FA&MI_00\6&301C001A&6&0000 == Platform USB Modem
Download and install LG drivers ala link section and part 1
http://forum.xda-developers.com/showthread.php?p=39269819
troopii said:
Go to device manager and right klick on the unknown device and hit preferences.
there you go to tab details. there look for device instance path.
USB\VID_1004&PID_61FA&MI_04\6&301C001A&6&0004 == ADB
USB\VID_1004&PID_61FA&MI_02\6&301C001A&6&0002 == USB Serial Port
USB\VID_1004&PID_61FA&MI_00\6&301C001A&6&0000 == Platform USB Modem
Click to expand...
Click to collapse
hi troopii,
i did that. here, i can see this:
USB\VID_1004&PID_D001\2CD00004000000010910D4D11800F00C
What does that mean? Is it ADB?
What am I suposed to do with this number?
Could you help me?
adrianohck said:
hi troopii,
i did that. here, i can see this:
USB\VID_1004&PID_D001\2CD00004000000010910D4D11800F00C
What does that mean? Is it ADB?
What am I suposed to do with this number?
Could you help me?
Click to expand...
Click to collapse
hmm looks interessting, i think you dont have a p920.
ok try a different way.
deactivate on your phone usb debugging.
plug your phone to the pc.
now you should have 2 unkown devices. one cdc serial and one lg cosmo usb device.
that lg cosmo usb device that you now see is Platform USB Modem.
now look at that device instance path and take a note.
now activate usb debugging again. plug phone to pc.
now you should have 3 unkown devices. one cdc serial and two lg cosmo usb device.
look again at the device instance path and if the current matches your note, you have found the "Platform usb modem" again. install driver for it
the other one should be the "android sooner singel adb interface".should be the same also in recovery.
gl
troopii said:
hmm looks interessting, i think you dont have a p920.
ok try a different way.
deactivate on your phone usb debugging.
plug your phone to the pc.
now you should have 2 unkown devices. one cdc serial and one lg cosmo usb device.
that lg cosmo usb device that you now see is Platform USB Modem.
now look at that device instance path and take a note.
now activate usb debugging again. plug phone to pc.
now you should have 3 unkown devices. one cdc serial and two lg cosmo usb device.
look again at the device instance path and if the current matches your note, you have found the "Platform usb modem" again. install driver for it
the other one should be the "android sooner singel adb interface".should be the same also in recovery.
gl
Click to expand...
Click to collapse
But I can´t desactivate USB debugging because I can´t access android in normal mode. I only can access android on Recovery Mode (ClockWorkMod).
I need to install some kind of driver to access the phone using ADB while in ClockWorkMod. I guess this is possible (I read this at http://forum.xda-developers.com/wiki/ClockworkMod_Recovery).
The problem is: when i connect the phone on PC while in ClockWorkMod there is a device called "LGE COSMO USB Device" and i didn´t find any driver that match.
drastic00 said:
Download and install LG drivers ala link section and part 1
http://forum.xda-developers.com/showthread.php?p=39269819
Click to expand...
Click to collapse
Hi,
I installed this two drivers:
LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0
LGUnitedMobileDriver_S497MA20_WHQL_ML_Ver_1.0
Is that correct?
None of them worked. When I go to device manager, there is still a device called "LGE COSMO USB Device".
Read and follow all details carefully and it will work. You will need to change port to 41 as well as force omap4430 driver to install so it stops blinking.
drastic00 said:
Read and follow all details carefully and it will work. You will need to change port to 41 as well as force omap4430 driver to install so it stops blinking.
Click to expand...
Click to collapse
Hi drastic00, I really appreciate your help and attention.
Let me try to explain my problem: I can´t turn on the phone in normal mode and, of course, I can´t follow your steps. The phone is locked, there is a password to unlock the screen. So, I can´t desactivate the USB debugging because I do not have access to Android.
The only way I have to boot the phone is in recovery mode (ClockWorkMod). But, I need to access the device to copy the data. And it is possible to do that using ClockWorkMod and ADB. The problem is: when I boot my cell phone into recovery mode (now on screen I see the options of clockworkmod) and plug the usb cable, then there is device "lge cosmo usb device" and i can´t access the phone via ADB. I typed "adb devices" and the answer was nothing...
None of the driver install steps require phone to be booted; all driver install steps require battery to be out of the phone. So why can you not install drivers?
drastic00 said:
None of the driver install steps require phone to be booted; all driver install steps require battery to be out of the phone. So why can you not install drivers?
Click to expand...
Click to collapse
I installed all the drivers. When I connect the phone of my friend (a p920 too), it works fine! I can also access his phone using ADB.
Solution found
Thank you guys, I find the solution.
Thanks verry much for manekineko. See:
http://forum.xda-developers.com/showthread.php?t=2028598
It worked when I installed PdaNet+ drivers:
http://pdanet.co/a/
Thanks at all.
Hm. New one on me but good to know.
Related
I have a T-Mobile Nexus S that has a bootloop. Its my friends so I dont know what he did to it. I can get to the bootloader but when I connect it to my computer it won't recognize it. I thought of a driver problem but i can't get past the bootloop to enable usb debugging. It also won't show up in device manager. The phone's usb port works. It will still charge. I just need to get rid of the bootloop. Any help would be greatly appreciated. Thanks!
MAGnum_21 said:
I have a T-Mobile Nexus S that has a bootloop. Its my friends so I dont know what he did to it. I can get to the bootloader but when I connect it to my computer it won't recognize it. I thought of a driver problem but i can't get past the bootloop to enable usb debugging. It also won't show up in device manager. The phone's usb port works. It will still charge. I just need to get rid of the bootloop. Any help would be greatly appreciated. Thanks!
Click to expand...
Click to collapse
If it has a custom recovery, boot into it and wipe data/factory reset.
If it does not, flash a custom recovery. These forums are chockful on guides how to root, flash stuff and fix bootloops.
I looked up how to install recoveries but when i plug in my nexus to my computer it is not recognized. At the bottom of the bootloader screen it says "USB Control Init" and then "USB Control Init End". I do have the proper drivers installed. Is there a fix for this?
Are you sure that you have the correct drivers installed, though?
It's known that people who use Windows have a lot of success with the PDAnet drivers (you can search around here for those), rather then with the standard USB drivers the Google SDK provides.
Greetz
Did you try to run "fastboot devices" in command prompt while it's at fastboot mode and plugged into the PC? What do you see as the result? The guides on XDA should help, but you may also head over to nexusshacks_dot_com for more references.
Sent from my Nexus S using XDA App
With pdanet it requires me to plug in my phone with usb debugging turned on to get the drivers with i cant do because of the bootloop. and when i go into command prompt it says "waiting for device" and won't recognize it. Thanks for the help
whn i install anew cwm on my p500 restart. it now on fastboot mod after that i dowm sdk &recovery&usb drivers from lg website but my device (p500) not reading i do every thing in the next threadhttp://forum.xda-developers.com/showthread.php?t=1088046 plz what i can do:crying:[/B][/B]
eng4mk said:
whn i install anew cwm on my p500 restart. it now on fastboot mod after that i dowm sdk &recovery&usb drivers from lg website but my device (p500) not reading i do every thing in the next threadhttp://forum.xda-developers.com/showthread.php?t=1088046 plz what i can do:crying:[/B][/B]
Click to expand...
Click to collapse
I am assuming you are running Windows on your PC. Did any drivers for the device get installed?
I am assuming you are running Windows on your PC. Did any drivers for the device get installed?
Click to expand...
Click to collapse
yes i down drivers for lg p500 from lg website and installed it but whn open cmd and write adb devices it not appear my device
eng4mk said:
yes i down drivers for lg p500 from lg website and installed it but whn open cmd and write adb devices it not appear my device
Click to expand...
Click to collapse
It may be a driver issue. If you want to try, download Android Flash Recovery ( link in my signature ). It also contains a driver installer for these devices. The only reason I'm saying this is because I know those drivers work with these devices. I am running Windows 7 64 bit too There are also detailed instructions on how to properly install the drivers.
I think that installing the driver we use for rooting our phone will solve the problem
Sent from my LG-P500 using xda premium
It may be a driver issue. If you want to try, download Android Flash Recovery ( link in my signature ). It also contains a driver installer for these devices. The only reason I'm saying this is because I know those drivers work with these devices. I am running Windows 7 64 bit too There are also detailed instructions on how to properly install the drivers.
Click to expand...
Click to collapse
this message appear to me "device driver software was not successfully installed"
any thing can i do to make my windows 7 64 to recognize my lg p500
plz help me
eng4mk said:
this message appear to me "device driver software was not successfully installed"
any thing can i do to make my windows 7 64 to recognize my lg p500
plz help me
Click to expand...
Click to collapse
This is the process that worked with my phone, first uninstall all of the drivers, then reboot the computer, then install the driver, but don't connect your phone, afterwards boot manually into fasboot and connect it to the computer, let the driver install...
Does it worked?
This is the process that worked with my phone, first uninstall all of the drivers, then reboot the computer, then install the driver, but don't connect your phone, afterwards boot manually into fasboot and connect it to the computer, let the driver install...
Does it worked?
Click to expand...
Click to collapse
which version of driver you installed
LGUnitedMobileDriver_S4981MAN37AP22_ML_WHQL_Ver_3.7.2
LGUSBModemDriver_WHQL_ML_Ver_4.9.7_All_Win7
LGUnitedMobileDriver_S4981MAN38AP22_ML_WHQL_Ver_3.8.1
if another driver can you give me the link
i will be Thankful
eng4mk said:
which version of driver you installed
LGUnitedMobileDriver_S4981MAN37AP22_ML_WHQL_Ver_3.7.2
LGUSBModemDriver_WHQL_ML_Ver_4.9.7_All_Win7
LGUnitedMobileDriver_S4981MAN38AP22_ML_WHQL_Ver_3.8.1
if another driver can you give me the link
i will be Thankful
Click to expand...
Click to collapse
LGUnitedMobileDriver_S4981MAN38AP22_ML_WHQL_Ver_3. 8.1
whn i uninstalled the driver no thing change i down the driver from lg website and from xda
Do you have generic Android drivers installed from the Android SDK? From your screen shot in post #6, and your last screen shot, your device is not identifying itself correctly or you have driver collusion. When the 'Searching for Drivers' window pops up the first item should say "LGE Android USB ???", "???" is cause I don't remember the rest
I'm beginning to think you may have multiple "Android" drivers installed, thus the problem. Generic Android USB drivers as well as the LG Android drivers. Uninstall all of them. Reboot your PC. Run the LGE Driver Setup program and let it do its thing. Reboot your PC. Power off your device, trust me. Plug your USB cable into the PC first. Now plug the other end in to your device. Power on the device. Hopefully this will get you headed in the right direction.
I recently bought a YU YUPHORIA . When i tried to root it I was stuck at waiting for device. I checked on different forums and somehow everybody was telling about how the ADB drivers are not installed. I tried different methods . I tried to update the Android Composite ADB Interface as they had worked for a lot of other people but they didn't work with my phone. Then i tried to install ADB drivers with the help of Pdanet but the Pdanet was stuck at Trying to install Pdanet on your phone. When i write fastboot commands like fastboot -i 0x2A96 devices my device is recognised. But when i write adb devices my device doesn't show up. Please help because I really need to use this phone for app development purposes but Android Studio is also not recognising my device. I have managed to root my device but can't solve this problem of ADB not detecting my device.
Usb debugging is enabled and i Have tried uninstalling all android drivers . But then the android ADB interface is shown in other drivers with yellow mark and when i try to update it same thing happens "Window unable to install drivers"
Is their any hardware problem with my Device.?
suparv2204 said:
I recently bought a YU YUPHORIA . When i tried to root it I was stuck at waiting for device. I checked on different forums and somehow everybody was telling about how the ADB drivers are not installed. I tried different methods . I tried to update the Android Composite ADB Interface as they had worked for a lot of other people but they didn't work with my phone. Then i tried to install ADB drivers with the help of Pdanet but the Pdanet was stuck at Trying to install Pdanet on your phone. When i write fastboot commands like fastboot -i 0x2A96 devices my device is recognised. But when i write adb devices my device doesn't show up. Please help because I really need to use this phone for app development purposes but Android Studio is also not recognising my device. I have managed to root my device but can't solve this problem of ADB not detecting my device. Is their any hardware problem with my Device.
Click to expand...
Click to collapse
First, be sure you have enabled USB debugging in developer options. Also, you may have to uninstall all android drivers from your PC and then reinstall the specific drivers for your device.
Evolution_Tech said:
First, be sure you have enabled USB debugging in developer options. Also, you may have to uninstall all android drivers from your PC and then reinstall the specific drivers for your device.
Click to expand...
Click to collapse
Usb debugging is enabled and i Have tried uninstalling all android drivers . But then the android ADB interface is shown in other drivers with yellow mark and when i try to update it same thing happens "Window unable to install drivers"
suparv2204 said:
Usb debugging is enabled and i Have tried uninstalling all android drivers . But then the android ADB interface is shown in other drivers with yellow mark and when i try to update it same thing happens "Window unable to install drivers"
Click to expand...
Click to collapse
OK, try to update manually. Select update driver, then choose let me pick, then navigate to where you have the new driver.
Evolution_Tech said:
OK, try to update manually. Select update driver, then choose let me pick, then navigate to where you have the new driver.
Click to expand...
Click to collapse
I mentioned in the post I tried that . But windows shows the same message. I have tried with Google Usb drivers . I have also tried with other mobile drivers of Asus , Htc but same thing happens
Need help. I was using Miracle Box to flash stock ROM, I don't know how but the phone (Micromax E453) is bricked now. I tried to start phone in Meta Mode (swiched off phone connected to PC by holding volume up button), it worked once, then following some tutorials I uninstalled (and checked, Delete the driver software for this device) MTK USB COM driver under port. Since then phone is not turning on and PC is not recognizing the device. Tired changing the USB cable and even tried it on another laptop, but no go. Kindly share what else I can try. PC has Windows 10 64 bit and MTK preloader vcom driver always has yellow exclamation mark (always installs with error code 10). I have disabled driver signature verificiation.
vnandwana said:
Need help. I was using Miracle Box to flash stock ROM, I don't know how but the phone (Micromax E453) is bricked now. I tried to start phone in Meta Mode (swiched off phone connected to PC by holding volume up button), it worked once, then following some tutorials I uninstalled (and checked, Delete the driver software for this device) MTK USB COM driver under port. Since then phone is not turning on and PC is not recognizing the device. Tired changing the USB cable and even tried it on another laptop, but no go. Kindly share what else I can try. PC has Windows 10 64 bit and MTK preloader vcom driver always has yellow exclamation mark (always installs with error code 10). I have disabled driver signature verificiation.
Click to expand...
Click to collapse
Did you have USB debugging enabled in the device's system settings before it got bricked? If not, you might not get it to connect via USB and be recognized.
Sent from my SM-S767VL using Tapatalk
Droidriven said:
Did you have USB debugging enabled in the device's system settings before it got bricked? If not, you might not get it to connect via USB and be recognized.
Sent from my SM-S767VL using Tapatalk
Click to expand...
Click to collapse
Thank you for your response. Yes, USB debugging was enabled before it got bricked. I was able to successfully see my device when I ran adb -devices command. I was also able to run fastboot commands. Now its completely dead.
I'm already experienced in custom ROMs and root... However this time the adb tools can't detect my phone even if it's attached by the original cable, and also the drivers are installed correctly + i allowed the USB debugging.
Any suggestions?
Or Sdk platform tools alternatives
Btw i want to reinstall a custom recovery for the phone.
Does phone connect in MTP mode?
jwoegerbauer said:
Does phone connect in MTP mode?
Click to expand...
Click to collapse
No
My guess is you havent't installed the "Android USB Driver" suitable to your phone.
BTW: ADB Tools? I've never heard / read of them.