Hey.
I just flashed my Tipo with Jelly Bean Mini Project 5. I dunno what i did wrong, but now it doesnt go beyond the boot screen. Waited over 15 mins. Bigger issue, doesnt even go to CWM anymore!!!! :crying::crying::crying::crying:
i had some other rom installed earlier which was malfunctioning, so i did a full wipe, and then flashed this, and landed here! PLZ HELP!!!!!
Try to flash stock firmware with androxyde flashtool
sent from XPERIA ST21i
did u unlocked ur bootloader? :/
followed instruction?
Yep, i did follow everything properly.
BTW i fixed it after like hours of brain bursting.
I tried flashing it with stock kernel, but to no use. it never went into recovery mode. dunno y, but i flashed it with miui kernel, and the startingsony icon changed and then for that 2 sec timeframe, i got an opportunity to try and get into recovery, and it worked, pheeewwww :victory:
Still dunno what the issue was
Thanks
Related
hello all,
yes another new noob here.
i have a xperia mini (st15i) and i will install my first custom rom on it.
i readed so much the last days and many different things, so i have some questions before, just to be sure i am doing right.
i am on stock rom .62 with root CWM 5.0.2.7 installed but bootloader is locked.
I know how to unlock it but this is not what i want to know
i have choosen this rom to flash
http://forum.xda-developers.com/showthread.php?t=1373435
If i have understand the install instructions, i am on the right boot.img having CWM installed and only need to unlock my bootloader, and then i am similar to this kernel?
http://forum.xda-developers.com/showthread.php?t=1440161
and can start flashing the rom ?
If something is going wrong, can i flash back to stock rom using flashtool or wotanserver? or will it brick because i have something to do first or can i just start flashing over with stock rom then?
Thanks for reading, any help would be nice
greeting, Grody (a brand new noob)
ok i unlocked bootloader and installed hybrom v15 from cwm recoevery menu all was going fine.
after reboot i only see sony ericsson logo and phone hangs, i can only remove battery to turn phone of.
i cant enter the cwm recovery menu only see this sony ericsson logo?
any help pls ?
edit:
Ok i figured it out. I flshed back to stock rom .62 device botted up, everything ok.
Then i flashed the boof kernel and after that i installed the hybrom v15
now everything works fine for me...
thanks for helping me guys xD
CWM was working fine on my phone. But recently i tried to install fxp 220. But while flashing boot.img my phone got somewhat dead, in the sense, the phone would only vibrate when i press power button and nothing would happen. So i downloaded stock kernel and flashed. Now the phone is working fine. But cwm is not booting. So i re-installed it. Still not working. Please help. Thanks in advance!
Please for GOD sake reply...I'm waiting. Tell me what has happened. I want to correct it. Please tell me how can i get cwm to work on m y phone. I've performed a nandroid backup before this happened. So is there any way out. Please please do help me.
Have you rooted after installing stock rom? First flash stock or skip if you have done that already.
Then use unlockroot to root your fone.
Then find cwm from the android development section and install it.
Then turn off your fone.
Turn it on and press vol - repeatedly when you see Sony logo.
Sent from my ST23i
c4cyro said:
Have you rooted after installing stock rom? First flash stock or skip if you have done that already.
Then use unlockroot to root your fone.
Then find cwm from the android development section and install it.
Then turn off your fone.
Turn it on and press vol - repeatedly when you see Sony logo.
Sent from my ST23i
Click to expand...
Click to collapse
I didn't flash to stock ROM, i just flashed STOCK KERNEL. So it's already rooted and BL is unlocked. I tried to install cwm more than 6-7 times. still not loading.
c4cyro said:
Have you rooted after installing stock rom? First flash stock or skip if you have done that already.
Then use unlockroot to root your fone.
Then find cwm from the android development section and install it.
Then turn off your fone.
Turn it on and press vol - repeatedly when you see Sony logo.
Sent from my ST23i
Click to expand...
Click to collapse
littlepai007 said:
I didn't flash to stock ROM, i just flashed STOCK KERNEL. So it's already rooted and BL is unlocked. I tried to install cwm more than 6-7 times. still not loading.
Click to expand...
Click to collapse
Solved my problem. I installed tipo dual-recovery and now i can boot into any of the recovery.
i'm stuck in an endless bootloop after trying to upgrade the CM10 Beta 4 version on my Samsung Galaxy S Plus.
This is what i did
I'd upgraded from 2.3.3 to 2.3.6 some months ago. Then flashed CM10 Beta 4 by ivendor.
For this i first downloaded the CWM -> recovery-clockwork-5.5.0.4-ariesve.tar.md5 and flashed it using Odin.
Then the ROM file -> cm-10-20130324-ivendor-beta4-ariesve.zip
Was checking the updates on this and found much advances in the 2.5 release of 2 May 2013.
So downloaded the CWM -> CWMRecovery-6.0.2.8-ariesve-kernel26.tar.md5. When i tried to flash using Odin it gave me the MD5 error.
Saw somewhere on the forum to flash using zip file, so downloaded CWMRecovery-6.0.2.8-ariesve-kernel26.zip and tried to flash. This was when my phone got soft-bricked.
Removed the cable, battery etc. After some time, was able to go into Download mode but not Recovery.
Then i tried to flash to stock ROM (2.3.6) - I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5. This completed and Odin said PASS. But the phone now goes into a bootloop. Tried the Recovery mode but after the Android-out-of-the-box symbol it again said SAMSUNG and started the boot. This is repeating continuously. What should i do now? Please help.
This is the sequence of things...
1) 2.3.3 to 2.3.6 - Success !!
2) Flash with CM10-Beta 4.a) recovery-clockwork-5.5.0.4-ariesve.tar.md5 - OK
b) cm-10-20130324-ivendor-beta4-ariesve.zip - Success!!!
c) gapps-jb-20121011-signed.zip - Success!!3) Flash with CM10-Release 2.5a) CWMRecovery-6.0.2.8-ariesve-kernel26.tar.md5 - MD5 checksum error !!
b) CWMRecovery-6.0.2.8-ariesve-kernel26.zip - Soft-bricked !!!4) Flash stock ROM (2.3.6) a) I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5 - PASS
Bootloop
Cannot go into Recovery mode too (after Recovery mode icon appears SAMSUNG logo comes up and phone boots with the blue spiral, this goes into a continuous loop)
anoopgkris said:
i'm stuck in an endless bootloop after trying to upgrade the CM10 Beta 4 version on my Samsung Galaxy S Plus.
This is what i did
I'd upgraded from 2.3.3 to 2.3.6 some months ago. Then flashed CM10 Beta 4 by ivendor.
For this i first downloaded the CWM -> recovery-clockwork-5.5.0.4-ariesve.tar.md5 and flashed it using Odin.
Then the ROM file -> cm-10-20130324-ivendor-beta4-ariesve.zip
Was checking the updates on this and found much advances in the 2.5 release of 2 May 2013.
So downloaded the CWM -> CWMRecovery-6.0.2.8-ariesve-kernel26.tar.md5. When i tried to flash using Odin it gave me the MD5 error.
Saw somewhere on the forum to flash using zip file, so downloaded CWMRecovery-6.0.2.8-ariesve-kernel26.zip and tried to flash. This was when my phone got soft-bricked.
Removed the cable, battery etc. After some time, was able to go into Download mode but not Recovery.
Then i tried to flash to stock ROM (2.3.6) - I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5. This completed and Odin said PASS. But the phone now goes into a bootloop. Tried the Recovery mode but after the Android-out-of-the-box symbol it again said SAMSUNG and started the boot. This is repeating continuously. What should i do now? Please help.
This is the sequence of things...
1) 2.3.3 to 2.3.6 - Success !!
2) Flash with CM10-Beta 4.a) recovery-clockwork-5.5.0.4-ariesve.tar.md5 - OK
b) cm-10-20130324-ivendor-beta4-ariesve.zip - Success!!!
c) gapps-jb-20121011-signed.zip - Success!!3) Flash with CM10-Release 2.5a) CWMRecovery-6.0.2.8-ariesve-kernel26.tar.md5 - MD5 checksum error !!
b) CWMRecovery-6.0.2.8-ariesve-kernel26.zip - Soft-bricked !!!4) Flash stock ROM (2.3.6) a) I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5 - PASS
Bootloop
Cannot go into Recovery mode too (after Recovery mode icon appears SAMSUNG logo comes up and phone boots with the blue spiral, this goes into a continuous loop)
Click to expand...
Click to collapse
AFAIK, CM10 would have already consisted of the latest CWM, so there is no need of u to flash a CWM again over it!
Ur biggest mistake, u MUST have had a nandroid backup before doing anything to ur phone! This might have been even recommended by the thread of the CM10.
So my last suggestion from the things that u have done, flash the CWM through odin if possible right now and if successful get into recovery mode and wipe data & cache and check whether the bootloop is gone.
Else try reflashing the stock firmware.
If that doesn't even help, get help from the devs related to ur device through PM.
If hopeless still, then hit a samsung service center near u
Hit thanks rather than typing it
Will try this
parkourkarthik said:
AFAIK, CM10 would have already consisted of the latest CWM, so there is no need of u to flash a CWM again over it!
Ur biggest mistake, u MUST have had a nandroid backup before doing anything to ur phone! This might have been even recommended by the thread of the CM10.
So my last suggestion from the things that u have done, flash the CWM through odin if possible right now and if successful get into recovery mode and wipe data & cache and check whether the bootloop is gone.
Else try reflashing the stock firmware.
If that doesn't even help, get help from the devs related to ur device through PM.
If hopeless still, then hit a samsung service center near u
Hit thanks rather than typing it
Click to expand...
Click to collapse
Thanks, will try this tonight
I already took the Nandroid backup before flashing CM10 Beta 4. But was not able to go into it after my phone was soft-bricked.
Solved - booted into 2.3.6 !!!
parkourkarthik said:
AFAIK, CM10 would have already consisted of the latest CWM, so there is no need of u to flash a CWM again over it!
Ur biggest mistake, u MUST have had a nandroid backup before doing anything to ur phone! This might have been even recommended by the thread of the CM10.
So my last suggestion from the things that u have done, flash the CWM through odin if possible right now and if successful get into recovery mode and wipe data & cache and check whether the bootloop is gone.
Else try reflashing the stock firmware.
If that doesn't even help, get help from the devs related to ur device through PM.
If hopeless still, then hit a samsung service center near u
Hit thanks rather than typing it
Click to expand...
Click to collapse
A million thanks!! It somehow started now into the 2.3.6.
Flashing the recovery-clockwork-5.5.0.4-ariesve.tar.md5 did not solve the bootloop. Then i flashed the Boot_loader.tar. That too did not solve the bootloop. Tried Recovery mode again but the SAMSUNG logo kept coming and going until i released my fingers after a full two minutes. Then before the android-out-of-the-box icon came it went straightaway into Recovery .
Wiped Data and Cache and rebooted. After a very very long time it started and asked if im okay with the Google data collection policy asked in Polish language.
Wow, going to update to 4.1.2 Release 2.5 in some time.
Thanks again man. :good:
Got CM10 Beta 4 again !
parkourkarthik said:
AFAIK, CM10 would have already consisted of the latest CWM, so there is no need of u to flash a CWM again over it!
Ur biggest mistake, u MUST have had a nandroid backup before doing anything to ur phone! This might have been even recommended by the thread of the CM10.
So my last suggestion from the things that u have done, flash the CWM through odin if possible right now and if successful get into recovery mode and wipe data & cache and check whether the bootloop is gone.
Else try reflashing the stock firmware.
If that doesn't even help, get help from the devs related to ur device through PM.
If hopeless still, then hit a samsung service center near u
Hit thanks rather than typing it
Click to expand...
Click to collapse
All went smooth. CM10 Beta 4 is back on my SGS+.
Thanks for the advises and help
anoopgkris said:
All went smooth. CM10 Beta 4 is back on my SGS+.
Thanks for the advises and help
Click to expand...
Click to collapse
U got it man:victory:
It's good that u posted the way u solved it! so that it would help others who face the same problem
BTW add the word [solved] in ur thread topic..
Hit thanks rather than typing it
[SOLVED] Bootloop problem after soft-brick
parkourkarthik said:
U got it man:victory:
It's good that u posted the way u solved it! so that it would help others who face the same problem
BTW add the word [solved] in ur thread topic..
Hit thanks rather than typing it
Click to expand...
Click to collapse
Sure, thanks !!
Also pasting here an easter egg that i saw after loading Gingerbread 2.3.6 before this CM10.
Putting this because i tried this for the first time in GB (the seven times click on android version)
Hi all
Using a ST26i
Rooted and unlocked bootloader, stock firmware ver 11.2.A.0.21 n stock kernal
every time i try to flash a custom ROM via CWM like so
http://forum.xda-developers.com/showthread.php?t=2145146
the phone goes into bootloops..
tried it with paranoidAndroid..same result..
fed up of restoring again and again..so can someone out here tell me where im going wrong so the next time i flash my phone i dont end up with a softbricked device that needs to be flashed with stock firmware again and again
Its a pain u kno
Did that twice today
Ended up with a softbricked phone 4 times this week
IrvinPinto said:
Hi all
Using a ST26i
Rooted and unlocked bootloader, stock firmware ver 11.2.A.0.21 n stock kernal
every time i try to flash a custom ROM via CWM like so
http://forum.xda-developers.com/showthread.php?t=2145146
the phone goes into bootloops..
tried it with paranoidAndroid..same result..
fed up of restoring again and again..so can someone out here tell me where im going wrong so the next time i flash my phone i dont end up with a softbricked device that needs to be flashed with stock firmware again and again
Its a pain u kno
Did that twice today
Ended up with a softbricked phone 4 times this week
Click to expand...
Click to collapse
Firstly make sure that you are flashing the correct ROM for your device. Your device is the Xperia J which means its code name is JLo.
If it is a CyanogenMod based ROM you will HAVE to flash the CM kernel for it to work.
IrvinPinto said:
Hi all
Using a ST26i
Rooted and unlocked bootloader, stock firmware ver 11.2.A.0.21 n stock kernal
every time i try to flash a custom ROM via CWM like so
http://forum.xda-developers.com/showthread.php?t=2145146
the phone goes into bootloops..
tried it with paranoidAndroid..same result..
fed up of restoring again and again..so can someone out here tell me where im going wrong so the next time i flash my phone i dont end up with a softbricked device that needs to be flashed with stock firmware again and again
Its a pain u kno
Did that twice today
Ended up with a softbricked phone 4 times this week
Click to expand...
Click to collapse
your kernel is not compatible with the rom you tried to flash, with AOKP ROM you will have to use the kernel provided with the ROM or flash one of the mentioned kernels by the dev, please read instructions by the devs carefully before you start flashing custom roms.
Hello!
Today I've played with my Xperia L too hard. I tried to change my android to cyanogenmod multiple times. (Again and again bootloop.)
It happened when I've done flashing from the recovery. Everything went smooth but then something came wrong,... Error.
I rebooted it and It stucked on SONY logo.
I used flashtool -> fastboot, flashmode, bootloader mode.
Unfortunately android and USB debugging are dead.
The only thing that still works is CWM recovery.
R.I.P. or not?
(My bootloader is unlocked.)
P.S. Sorry for my bad english and thanks in advance.
You did not mention if you tried booting after a factory reset (clearing data and caches)
Sent from my C2105 using XDA Free mobile app
StillBrilliant said:
You did not mention if you tried booting after a factory reset (clearing data and caches)
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
Of course I tried. System is not even loading up. Everything ends on SONY logo or CWM recovery.
I think that partitons are blank.
I got stock ROM on my HDD. I think i can convert .tft to .zip and then through another phone/adapter do the copy to sdcard.
Is it the same as flashing through the Flashtool?
Hmmm
I already tried to install .zip firmware but "Instalation aborted." after "Instaling update."
Solution?
Phone can't even charge the battery.
Hristmas said:
Hello!
Today I've played with my Xperia L too hard. I tried to change my android to cyanogenmod multiple times. (Again and again bootloop.)
It happened when I've done flashing from the recovery. Everything went smooth but then something came wrong,... Error.
I rebooted it and It stucked on SONY logo.
I used flashtool -> fastboot, flashmode, bootloader mode.
Unfortunately android and USB debugging are dead.
The only thing that still works is CWM recovery.
R.I.P. or not?
(My bootloader is unlocked.)
P.S. Sorry for my bad english and thanks in advance.
Click to expand...
Click to collapse
To upgrade to Cyanogenmod you need to have the latest sony update for your device. (4.2.2)
You also need to have the latest CWM on your device. For the newer updated roms ( Cyanogen,Carbon....)
And ofcourse you need to whipe everything before proceding..... factory reset,clean cashe and dalvik....
Try flashing it with Thunderzap...
Thunderzap 4.6 is designed for kitkat roms.
Works perfectly with flashing it and running on them.
Best of luck.
PS: I had the similar issue like yourself on start. I was stuck...
The thing is i flashed roms true custom kernels such as THUNDERZAP or PHANTOM...
Never worked true flashtool.
I only flashed custom kernel true flashtool and stock rom.
Yes.
Maybe you won't belive me, but I tried custom kernel sec before you posting.
It works now. And problem was my recovery. It died on symlinks.
And as u wrote I tried Thunder Kernel + Thunder Stock recovery.
Everything went smooth I installed Carbon without problems.
Anyway thanks and again sorry for my average english.
Hristmas said:
Maybe you won't belive me, but I tried custom kernel sec before you posting.
It works now. And problem was my recovery. It died on symlinks.
And as u wrote I tried Thunder Kernel + Thunder Stock recovery.
Everything went smooth I installed Carbon without problems.
Anyway thanks and again sorry for my average english.
Click to expand...
Click to collapse
Glad to hear you got it working.
Enjoy the smoothness man.
Your english is just fine.