Database Info

[Q] how to take backup???

How to take backup when i flash my device from cm7.1 to 7.2 RC5

skt4u said:
How to take backup when i flash my device from cm7.1 to 7.2 RC5
Click to expand...
Click to collapse
You can take backup of ur system using cwm...
Press tnx if i hlpd u.. !
Sent from my GT-S5670 using XDA App

Chirag219 said:
You can take backup of ur system using cwm...
Press tnx if i hlpd u.. !
Sent from my GT-S5670 using XDA App
Click to expand...
Click to collapse
How? Instructions.

plz tell me the procedure since i m new to android???

skt4u said:
plz tell me the procedure since i m new to android???
Click to expand...
Click to collapse
Reboot phone into CWM recovery, go to Backup & Restore and create a backup.
Press Vol Down or Vol Up to choose Backup & Restore.

EDIT : Problem Solved Qmobile noir a2 stock rom needed

Please Guyz I Need A CWM BackUp Of Noir A2 Please Guyz I Am In Big Trouble
EDIT : Problem Solved

Re: Helpp!!!! Qmobile noir a2 stock rom needed
I hv sent u a msg plz check nd reply me ur email id so I can send u whole backup
Sent from my A2 using xda app-developers app

sir help me i need rom for a2

Bricked
qmobilea2 said:
I hv sent u a msg plz check nd reply me ur email id so I can send u whole backup
Sent from my A2 using xda app-developers app
Click to expand...
Click to collapse
I also need

Help me my qmobile a2 stucks on logo
shani3618 said:
sir help me i need rom for a2
Click to expand...
Click to collapse
I Also need back up . i dont have anything in my mobile now . my mobile stucks on logo

bro thats a boot loop the only way to now make ur phone work again is to restore the back up of stock rom

LPCRJ™ said:
bro thats a boot loop the only way to now make ur phone work agagin is to restore the back up of stock rom
Click to expand...
Click to collapse
But bro my problem is i didnt maded a backup while rooting and Now i cant even get into recovery mode . Whenever i try to get into recovery mode it reboots and freezes on logo again
and whenever i try to connect it on pc via data cable nothing shows up on device manager.

Hey Guyz Head To My Thread Of The Stock Rom Its Here : http://forum.xda-developers.com/showthread.php?t=2213364

[Q] Urgent Help Needed !!! [Bootloop Issue]

Heyy Guyss... M Stuck On The Loading Screen... And Even The CWM Isnt Working.. All This Happened After I Received a call.. The Touch Screen Went Blank And Unresponsive... I Removed The Battery And Tried Restarting But IT Didn't... Any Solution??? And Again--- CWM ISN'T WORKING!!! Was Running On The Awesome Lewa OS By Mufti.arfan....

Hey no worries......
Just flash stock jb rom via sp flash tools. It will bring ur fone to life back or u can flash suvi rom v9 via sp flash tools as it is a flashable custom rom via sp flash tools.
Sent from my Micromax A110 using xda app-developers app

Didn't Help
Swadheen Tripathi said:
Heyy Guyss... M Stuck On The Loading Screen... And Even The CWM Isnt Working.. All This Happened After I Received a call.. The Touch Screen Went Blank And Unresponsive... I Removed The Battery And Tried Restarting But IT Didn't... Any Solution??? And Again--- CWM ISN'T WORKING!!! Was Running On The Awesome Lewa OS By Mufti.arfan....
Click to expand...
Click to collapse
Yaa Bro Tried That Also... Unfortunately Didn't Work... Still Bootlooping Also Touch Not Working... [Update] CWM Working Now... Tried Flashing Lewa OS Again... But To No Avail..

Hey now flashing any rom via cwm or twrp wont help u.
You have to follow dis post strickly as it is to get ur fone back to life....
I also have bricked my canvas 2 about 3-4 times and everytime fis method helped me.
Hope it also works for u.
NOTE-AFTER FLASHING THIS ROM UR FONE WILL BE UNROOTED AND RECOVERY WILL BE CHANGED TO STOCK.BUT STILL IT IS NT A BIG DEAL IN EXCHANGE OF UR FONE'S LIFE.:
POST"S LINK: http://forum.xda-developers.com/showthread.php?p=43707010
Hit thx if i helped

Nope
Swadheen Tripathi said:
Yaa Bro Tried That Also... Unfortunately Didn't Work... Still Bootlooping Also Touch Not Working... [Update] CWM Working Now... Tried Flashing Lewa OS Again... But To No Avail..
Click to expand...
Click to collapse
I Did The Same Thing Earlier...Still The Touch Screen Isn't Working AT ALL... It Comes Out Of The Bootloop After 15 mins of startup... bt since the touch aint working.. (only volume button and keylock working) also the feather touch buttons dont work... i cant do nythn.. last resort service centre neway thanks for following post ... +1 to u broo

Try factory restore settings
This should fix ur problem :thumbup:
Hit thanks if i helped
Sent from my GT-S7500
---------- Post added at 11:08 PM ---------- Previous post was at 11:05 PM ----------
Also try update of cwm(V6)
This may help u:thumbup:
Hit thanks if i helped
Sent from my GT-S7500

[email protected] said:
Try factory restore settings
This should fix ur problem :thumbup:
Hit thanks if i helped
Sent from my GT-S7500
---------- Post added at 11:08 PM ---------- Previous post was at 11:05 PM ----------
Also try update of cwm(V6)
This may help u:thumbup:
Hit thanks if i helped
Sent from my GT-S7500
Click to expand...
Click to collapse
CWM aint working now bro... sumhow the device loaded and i connected it via usb.. bt touch aint working [edit] yup installed cwm via sp flash tools.. didnt work....!!!

Try Twrp mode
Have u selected download option while flashing stock jb, tell me
This may help u:thumbup:
Sent from my GT-S7500

[email protected] said:
Try Twrp mode
Have u selected download option while flashing stock jb, tell me
This may help u:thumbup:
Sent from my GT-S7500
Click to expand...
Click to collapse
yupp selected download option.. vl check twrp thingie

Try firmware upgrade
This may help u:thumbup:
Sent from my GT-S7500

[email protected] said:
Try firmware upgrade
This may help u:thumbup:
Sent from my GT-S7500
Click to expand...
Click to collapse
goin to service centre broo... nothn working,,, neway thanx for ur help... +1

Well give a last try.
A few days before i also bricked my canvas 2 and then tried to flash a new software via sp flash tools.
The software flashed successfully bt my touch was nt working at all and similar to u only volume and power buttons work working.
THEN I DOWNLOADED ANOTHER JB SOFTWARE AND FLASHED IT VIA SP FLASH TOOLS(THIS TIME I TRIED CLICKING ON FIRMWARE UPGRADE) and wooa my fone came back to life.then i came to know that it was only faulty firmware in which touch was nt working. think u too have downloaded that.
BEST OF LUCK
Sent from my Micromax A110 using xda app-developers app

If this also dont work then go to service centre and play fake.
Say i have done nothing.......i have restored factory settings and now dis happened.( do dis only after flashing stock jb rom or dey will come to know everything from bootlogo).
If dey ask anything about root,cwm etc.. etc... only say vat r dese like an innocent newbie
Den Claim ur warranty....
It worked ven i got my fone bricked while installing chainfire.

damage micromax a45

plz help me asap!!!!! i am using micromax a45. accidently i delete all system file in it,then it was not starting stuck at SUPERPHONE PUNK at start plzz help me ____/\____ ......... I AM BEGGING SOMEONE TO HELP ME OUT!!!! :crying:

u need to flash stock rom nothing to worry its just a softbrick

No need of panic.. just flash the stock rom
http://forum.xda-developers.com/showthread.php?p=39206016
Hope this link helps you..
Out search for more
Sent from my Micromax A116 using xda app-developers app

need help bro
doctor_droid said:
u need to flash stock rom nothing to worry its just a softbrick
Click to expand...
Click to collapse
plz tell mi how to flash stock rom for micromax a45 ?
:fingers-crossed:

search the RUU(google search) update for your device.if it has,download that and connect your device in computer. then it will automatically installs
Sent from my GT-P3100 using xda app-developers app

thanx
doctor_droid said:
u need to flash stock rom nothing to worry its just a softbrick
Click to expand...
Click to collapse
thanx for ur help my i started my phone __/\__ :good: :laugh:

[Q] Samsung Galaxy Core Dead / Bricked

Hi all Please Help
last night i was installing SaMyKat v3 final but was unable. when i reboot my devise from recovery mode tried to flash super su the devise did not restart and it was dead after that please help me what happened do my devise as before this i rooted many devise but had no problem at all. please help me as soon as possible.

rasheed.jafri said:
Hi all Please Help
last night i was installing SaMyKat v3 final but was unable. when i reboot my devise from recovery mode tried to flash super su the devise did not restart and it was dead after that please help me what happened do my devise as before this i rooted many devise but had no problem at all. please help me as soon as possible.
Click to expand...
Click to collapse
U can try usb jig. It will force ur device to boot in download mode.
Sent from my GT-I8262 using XDA Premium 4 mobile app

repaired by Jtag box paying PKR 2000
nshntshrm7 said:
U can try usb jig. It will force ur device to boot in download mode.
Sent from my GT-I8262 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thank you ...
but one more question when i restart of power off the device it vibrates too much .... before this it was not having such problem ...

rasheed.jafri said:
thank you ...
but one more question when i restart of power off the device it vibrates too much .... before this it was not having such problem ...
Click to expand...
Click to collapse
I also had same problem of vibrating too much, but after factory reset it solved

Thanks
Killwish said:
I also had same problem of vibrating too much, but after factory reset it solved
Click to expand...
Click to collapse
thanks buddy !
will samsung release update for Samsung Core GT-I8262 Jelly Bean 4.2 or 4.3

rasheed.jafri said:
thanks buddy !
will samsung release update for Samsung Core GT-I8262 Jelly Bean 4.2 or 4.3
Click to expand...
Click to collapse
Don't know about it... But you can find stock Rom here http://samsung-updates.com
Sent from my GT-S7582 using XDA Premium 4 mobile app

nshntshrm7 said:
u can try usb jig. It will force ur device to boot in download mode.
Sent from my gt-i8262 using xda premium 4 mobile app
Click to expand...
Click to collapse
i have the same problem..........can i do sth without a usb jig?