Related
Q&A for [ROM][4.4.4][Unofficial] CyanogenMod CM-11.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4][Unofficial] CyanogenMod CM-11.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Burst mode bug in camera!
hello,
I've been using cm 11 for a while now and one thing i have noticed to be really buggy is the camera,
when you set in the burst mode let's say 5 shots; instead of capturing 5 images instantaneously it focuses for every shot! and the whole meaning of burst mode is lost in the process. please do look into this issue in the next build.
jreddy said:
hello,
I've been using cm 11 for a while now and one thing i have noticed to be really buggy is the camera,
when you set in the burst mode let's say 5 shots; instead of capturing 5 images instantaneously it focuses for every shot! and the whole meaning of burst mode is lost in the process. please do look into this issue in the next build.
Click to expand...
Click to collapse
It's not a bug, it's in your set up. When you go into the camera settings, go to "Focus Mode". It should give you an option called something like "fixed" or "continuous", etc. That'll keep it from refocusing between shots.
did not work.
1BadWolf said:
It's not a bug, it's in your set up. When you go into the camera settings, go to "Focus Mode". It should give you an option called something like "fixed" or "continuous", etc. That'll keep it from refocusing between shots.
Click to expand...
Click to collapse
It was set to auto by default, i changed it and tried it with every option available in that list nothing worked, and it does not seem to be a HW prob cause it was working perfectly on 4.1.2.
new build faild to install
yesterday i download new buid and i also download new gapps then i try to install new rom and gapps but its fail to load and red light turn on and the rom and gapps just install in three or five second usually its takes some minutes but this time its happed like this so if anybody know about this problem please help.
first i format system,data,and cash and all that option then install new rom and after that gapps but its not boot after that so current i switch back to older build.
thanks
Sharp Battery Drain
hi,
I've installed the latest build of CM11 by @thehurricaneguy coming from the older build of CM11 from the previous thread by @alteredlikeness.
Now after installing this build it the main problem for me was the battery sharply drains to 20% from 50-40%, i thought it was a battery problem and bought a new one it's the same for the new battery too, i thought i was the only one as it seems that was not the case.
Main problem starts here. i'm running CM11 on system 3 and it some how affected jb leak 3 too :C, i now have two batteries that drain to 20% from 50-40% on BOTH ROM's , after this issue I've deleted the system 3 and now run on 4.1.2 but the drainage remained the same.
i wiped the battery stats, cache, Dalvik Cache many times hoping that might fix it but to no avail.
>>>"I accidentally Erased my CID a long time Ago"<<<
i'm scared of doing a factory Reset and losing BMM ending up with a Bricked Phone, could any one help me resolve this battery drainage issue and how to restore CID with out a back up copy.
thank you
Stock Calendar and Google Calendar Not Working
From last three or four updates i notice that calender not working its can not sign in to a an account nor its start sync with already added one Google account right now i m using latest build of cyanogenmod 11 by @thehurricaneguy.
jadeja.rajdeep said:
From last three or four updates i notice that calender not working its can not sign in to a an account nor its start sync with already added one Google account right now i m using latest build of cyanogenmod 11 by @thehurricaneguy.
Click to expand...
Click to collapse
I'm using Google Calender 5.0 right now and it works flawlessly.
Try clearing data and/or reinstalling the app.
thanks for new build
thank you very much for your time and effort for new build @thehurricaneguy
Atrix 2 CM11 20141115 ROM
Other than completely no sound at all, has anyone face YoutTube always buffers the video but fail to play, Videos cant be played using gallery and camera in whatsapp is very buggy/fisheye ? How should i fix this? Dirty flash to previous CM11 version?
---------- Post added at 05:14 AM ---------- Previous post was at 05:05 AM ----------
jreddy said:
hi,
I've installed the latest build of CM11 by @thehurricaneguy coming from the older build of CM11 from the previous thread by @alteredlikeness.
Now after installing this build it the main problem for me was the battery sharply drains to 20% from 50-40%, i thought it was a battery problem and bought a new one it's the same for the new battery too, i thought i was the only one as it seems that was not the case.
Main problem starts here. i'm running CM11 on system 3 and it some how affected jb leak 3 too :C, i now have two batteries that drain to 20% from 50-40% on BOTH ROM's , after this issue I've deleted the system 3 and now run on 4.1.2 but the drainage remained the same.
i wiped the battery stats, cache, Dalvik Cache many times hoping that might fix it but to no avail.
>>>"I accidentally Erased my CID a long time Ago"<<<
i'm scared of doing a factory Reset and losing BMM ending up with a Bricked Phone, could any one help me resolve this battery drainage issue and how to restore CID with out a back up copy.
thank you
Click to expand...
Click to collapse
Have you check the clockworkmod file in your SD card? I too deleted my CID but luckily i found my CID in the clockworkmod file
UPDATE : Camera app is totally bugged. Its inverted and focus is jelly-ish like. Running on CM11 ver.20141115
Sent from my MB865 using XDA Free mobile app
hi this work whit motorola atrix ME865 ?????????????????
Hitokirilv4 said:
hi this work whit motorola atrix ME865 ?????????????????
Click to expand...
Click to collapse
Hey there yes this will work with any region Atrix2, just make sure you install and use Boot Menu Manager to flash it. Follow all instructions given on how to flash it in the CM11 thread and there are guides here on how to setup BMM for ready use. Good luck!
Updates
Are we going to have any more updates of this ROM or should I flash the 11/15 ROM???
edit: nvm,got it
Unable to find 3rd Nov Build
Hi All,
I am unable to find 3rd Nov build for CM 11 @thehurricaneguy
Google drive folder is empty and Box contains only cm-11-20140830-UNOFFICIAL-edison.zip
Is there any other link than the Original Post to find all versions?
Thanks
Q&A for Aosp kitkat 4.4.2 rom
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Aosp kitkat 4.4.2 rom. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can i flash the "" LATEST KERNEL PATCH : fixed performance, battery, ram and more"" and ""UPDATE FROM BASIC_13 : fixed otg, ui, battery"" on android L themed room cause that rom has the same issues...... Thanks
Partition recommended??
Is it necessary to make 880mb partition to AOSP kitkat ROM of Canvas 2 plus..??
@pravin21 yes 880mb system partition is must.
Samuel117 said:
@pravin21 yes 880mb system partition is must.
Click to expand...
Click to collapse
Thanks yar installed aosp stock rom enjoying awesomness of kitkat
call volume is low
call volume is low ...
when i call smeone or reseve a call the listing volume is low plz do smethng and ty for rom.
Problems with KK ROM & re-flashing backup/stock ROM
Hello,
Thank You for KK ROM. As explained in the post, I had tried flashing the KK ROM on my rooted MMX A110Q with CWM 6.0.5.1 . But, after flashing the ROM, I found the phone was stuck at boot for about 45 minutes or so. So, I tried re-flashing but that didn't work. Later, I re-flashed the backup/recovery which I made before flashing the KK ROM. But, I found that there were 2 problems:
One, screen brightness can't be adjusted. Second, when the screen dimmed after screen timeout or I used the power button to put off the screen, the screen didn't show up, only the button lights glowed, so to see the screen again (maybe a problem with Light Sensor & Proximity Sensor, not sure), I had to remove the battery & reboot. Please solve my problem. Right now, I am not comfortable with the idea of System re-partitioning.
Also, I am not able to flash Stock ROM zip either in recovery or using SP Flash tool (on PC). Please help.
bugs found
call volume is low ...
when i call someone or reserve a call the listing volume is low
led light get yellow on 90%.
wifi stop working smetime.
How much time it takes
How much time it takes 1 or 2 hours pls tell me
It's Not working
pravin21 said:
Is it necessary to make 880mb partition to AOSP kitkat ROM of Canvas 2 plus..??
Click to expand...
Click to collapse
Yes 880mb partition is necessary :fingers-crossed:
Video Thumbnails Issue.
Hey, Thanks for the ROM. I managed to install it successfully.
There are some issues with the rom which I am posting below.
1. Screen Brightness has slowed down.
2. Proximity sensor starts after 2-5 seconds of call being connected
3. The major issue is Gallery - Video thumbnails play even if the folder is not opened . I need to get rid of this immediately.
4. Themer application does not fill the whole screen
5. There is a bit of lag in transitions.
Background apps bug
After flashing this Rom on my canvas 2 plus a110q am not getting whatsapp messages unless I open the app. I again face the same problem when I clear whatsapp from recent app list. Happens with hike too. Plz tell me solution
Stable rom
which kernel to flash first
i m confused which kernel to flash after the rom flashing, or am i supposed to flash the kernel first and then the rom, plz reply
My device: HTC ONE MAX (International) , Rooted , TWRP Installed, Hboot 2.49
My Problem/q : whenever i try to flash custom roms that have a cyanogenmod 11 base such as the CrDroid or the AOSB or any rom that has a cyanogenmod base everything works perfect except that when the signals show after like 20 seconds i get "Android.process.phone has stopped error" twice and when i press OK the signals are gone.
Now keep in mind i did a Clean Full wipe Installation.
Someone please take a minute or two and help me with this problem i will be really grateful. thanks alot.
OneLessRoot said:
My device: HTC ONE MAX (International) , Rooted , TWRP Installed, Hboot 2.49
My Problem/q : whenever i try to flash custom roms that have a cyanogenmod 11 base such as the CrDroid or the AOSB or any rom that has a cyanogenmod base everything works perfect except that when the signals show after like 20 seconds i get "Android.process.phone has stopped error" twice and when i press OK the signals are gone.
Now keep in mind i did a Clean Full wipe Installation.
Someone please take a minute or two and help me with this problem i will be really grateful. thanks alot.
Click to expand...
Click to collapse
Thats a bug. Send the bug report to the rom developer. Mine bug on cm11 for moto g was that if the notification bar was filled with details of upcoming alarms the system.ui would force close as soon as i unlock the phone and that happened repeatedly.
Sent from my XT1033 using XDA Free mobile app
OneLessRoot said:
My device: HTC ONE MAX (International) , Rooted , TWRP Installed, Hboot 2.49
My Problem/q : whenever i try to flash custom roms that have a cyanogenmod 11 base such as the CrDroid or the AOSB or any rom that has a cyanogenmod base everything works perfect except that when the signals show after like 20 seconds i get "Android.process.phone has stopped error" twice and when i press OK the signals are gone.
Now keep in mind i did a Clean Full wipe Installation.
Someone please take a minute or two and help me with this problem i will be really grateful. thanks alot.
Click to expand...
Click to collapse
are you using the recovery version specified on CM website?
http://wiki.cyanogenmod.org/w/Install_CM_for_t6
yeah im on the latest TWRP and everything is fine in the roms i flash except for that i get the message "android.process.phone" has unfortunately stopped and then there is no service. this repeats over and over. service comes for 20-40 seconds and then i get the message and then it goes away
Recently, I have been able to download apps from the Google Play Store perfectly normal. Although I can not download from browser. When I try to download any kind of file from the browser I go to my downloads and it only shows it in the Queue. I am also unable to take a photo with the camera and go to the gallery to view it. I also can not transfer files through fast boot or recovery (I use Skipsoft Toolkit). Due to being unable to add any files I can not attempt to install a new rom, kernel, or anything else. Earlier today when I plugged it into the charger, it rebooted and kept starting up to where it said Google (screen you see even if booting into fastboot) and bootloop restarting at that point but I left it and it eventually started up. There have also been random reboots. All help will be GREATLY appreciated. Phone info below.
Android v 5.1
Device:LG Nexus 5 (Bootloader unlocked)(T-Mobile)
TWRP Custom Recovery (touch screen version)
Custom Rom (+ build number): xTrasmooth 5.0 LMY47I
Kernel:3.4.0 Franco
Hope that's enough info
[EDIT]: Would completely uninstalling Exposed framework help?
coatedkhan said:
Recently, I have been able to download apps from the Google Play Store perfectly normal. Although I can not download from browser. When I try to download any kind of file from the browser I go to my downloads and it only shows it in the Queue. I am also unable to take a photo with the camera and go to the gallery to view it. I also can not transfer files through fast boot or recovery (I use Skipsoft Toolkit). Due to being unable to add any files I can not attempt to install a new rom, kernel, or anything else. Earlier today when I plugged it into the charger, it rebooted and kept starting up to where it said Google (screen you see even if booting into fastboot) and bootloop restarting at that point but I left it and it eventually started up. There have also been random reboots. All help will be GREATLY appreciated. Phone info below.
Android v 5.1
Device:LG Nexus 5 (Bootloader unlocked)(T-Mobile)
TWRP Custom Recovery (touch screen version)
Custom Rom (+ build number): xTrasmooth 5.0 LMY47I
Kernel:3.4.0 Franco
Hope that's enough info
[EDIT]: Would completely uninstalling Exposed framework help?
Click to expand...
Click to collapse
http://forum.xda-developers.com/goo...urce-guides-info-threads-linked-read-t2784527
#2 post. read it.
"Before attempting to gain root access, we would expect you to have properly read and understood the following threads. If you do not understand something, try reading it again before asking in the thread or posting in the Q&A section."
beekay201 said:
http://forum.xda-developers.com/goo...urce-guides-info-threads-linked-read-t2784527
#2 post. read it.
"Before attempting to gain root access, we would expect you to have properly read and understood the following threads. If you do not understand something, try reading it again before asking in the thread or posting in the Q&A section."
Click to expand...
Click to collapse
Thank you! That resolved my issue perfectly!!!
Hi,
as I cannot find a Bq Aquaris U Plus section (why is that so?), I post this here (please move if incorrect).
I bought this phone as it should have official LOS support. Unfortunately, when I install it according to the LOS-wiki, it boots, but it takes forever.
I was first on 2.3.3 Firmware when I flashed it, then checked the base firmware it was build against (2.8) and updated official ROM via OTA to 2.8 (bootloader says so too). Still the same issue. Sometimes it takes 2 minutes, sometimes 5 minutes or more to boot, sometimes it does not boot at all (then clearing caches is the only fix).
There are alot of errors in logcat I do not know how to address - I attached them here:
log1_errors.txt only contains dumped errors
log1_partx.txt contains the whole log, I had ti split it in two parts, as forum rules says the log is too big.
What I tried so far:
- clean flash LOS with and without openGapps and root
- tried with 2.3.3 and 2.8 as base firmware
- stock ROM works fine and boots in less then 1/2 minute
Can anybody have a look over the logcat files for me? Can I provide more useful logs? Which ones?
Thanks in advance
martin_155 said:
Hi,
as I cannot find a Bq Aquaris U Plus section (why is that so?), I post this here (please move if incorrect).
I bought this phone as it should have official LOS support. Unfortunately, when I install it according to the LOS-wiki, it boots, but it takes forever.
I was first on 2.3.3 Firmware when I flashed it, then checked the base firmware it was build against (2.8) and updated official ROM via OTA to 2.8 (bootloader says so too). Still the same issue. Sometimes it takes 2 minutes, sometimes 5 minutes or more to boot, sometimes it does not boot at all (then clearing caches is the only fix).
There are alot of errors in logcat I do not know how to address - I attached them here:
log1_errors.txt only contains dumped errors
log1_partx.txt contains the whole log, I had ti split it in two parts, as forum rules says the log is too big.
What I tried so far:
- clean flash LOS with and without openGapps and root
- tried with 2.3.3 and 2.8 as base firmware
- stock ROM works fine and boots in less then 1/2 minute
Can anybody have a look over the logcat files for me? Can I provide more useful logs? Which ones?
Thanks in advance
Click to expand...
Click to collapse
Thank you very much for the information.
We will review the logs that you have sent, and we will try to correct all the errors, that we can, as soon as possible.
A greeting.
Thanks for the quick reply
Let me know when I can be of assistance somehow. Testing, providing logs - (I currently have no build system up running (defective main machine...), but I can quickly change that, if needed )
Edit: I forgot to say in the main post that I tried with LOS build from 08/05, 07/29 and 07/08
tenshi - logcat build 08/19/18
mifl said:
Thank you very much for the information.
We will review the logs that you have sent, and we will try to correct all the errors, that we can, as soon as possible.
A greeting.
Click to expand...
Click to collapse
I've seen some changes in logs, so I tried again. I've added the logcats from the recent build 08/19/18. It's a clean flash with official twrp (3.2.3-0) without anything else.
Same issues as described in first post. The phone boots (most of the times), but needs an eternity for it.
Thanks for looking into it, mifl
Somehow the phone booted once without errors. I attached the logcat again (recent release from 30-09-18).
I don't know why it happened but every other time it again needs an eternity to boot. It again runs into bootloop till the cache is cleared due to that.
I just don't get it..
I got same problems.....sometimes boot fast somestimes boot looooong over 5 minutes.