Related
I know with Hboot 1.13, I can't flash radio in recovery. I've heard I've to do supercid or relock the phone to RUU or somethings like that?
Could ne1 kinda give me any information or links on how to do it step by step?
Thanks
1. Do that SuperCID thing
2. Go to Recovery, install the 1.74 ( I think ) RUU
Your phone will be re-locked now and be pretty much vanilla.
3. Install 2.12 Update
4. Unlock again
5. Have fun
http://forum.xda-developers.com/showthread.php?t=1671643
I just found the relative thread of how to do supercid on One S. After doing supercid... I have to go to recovery mode and run the 1.78 RUU? and OTA to 2.21? After all, Unlock it again and root.
My Question is do I need to flash stock recovery, stock boot and relock bootloader myself before run the 1.78 RUU?
Did you try to root the 2.21 RUU?
After installing 2.21 RUU, I've unlocked my bootloader, reinstalled CWM recovery, rooted my phone (everything was on that thread http://forum.xda-developers.com/showthread.php?t=1583427) and reinstalled my CM10 backup (without forgetting to flash boot.img via fastboot) and everything is OK!
Thanks everyone. I just successfully updated my radio with 2.21 RUU now. After that, I unlocked my bootloader again and install clockwork recovery and SU.
I just flashed trickdroid V7.1, everything works great. Actually, the procedure isn't difficult but extremely troublesome ... damn the HTC doesn't give us S-Off.
I don't remember, but will booting into recovery allow you to flash radio without flashing the ruu first. Don't know if cwr or twrp would be better for that. It worked on kernels, I believe, as the htc restrictions did not then apply.
It depends on your actual hboot, since 1.13 hboot you can't directly flash radio throught recovery and you have to install the latest RUU but if you are still on an older hboot you can flash the radio via CWM or TWRP (follow this thread http://forum.xda-developers.com/showthread.php?t=1684477).
I am familiar with that link and have used it. As I am on .06 hboot I have no issues flashing radios.
Was just trying to determine for others if that method would work on .13 and higher and why not. I personally am not 100% sure if it will or will not--
Since I have not seen any posts on doing that, it probably won't--not sure
I have a couple questions.
I am on the 1.16 hboot with cid111111 and s-off unlocked tampered. twrp and maximus rom.
I finally did super cid and s-off on my one-s. Shortly after I recieved a notification that ota update 3.16.401.8 (612.27 mb) was available.
I was wondering if it would even work if i attempted to update. or would i have to update manually. Or would it brick it.
The main reason i would want to update is because the JB Sense roms just dont seem to run smoothly on my phone.
I was thinking this would update everything so the custom roms run smoother.
And Should i even update my hboot. does it make a difference.
I would usually be against it(ive had to downgrade other phones before).
Never take an OTA if you are on a custom rom with a custom recovery. Especially if you have SuperCID, unless you want a paperweight. If you want that OTA, you need to get you original CID, flash stock recovery, relock bootloader, then flash an RUU for your carrier.
impostle said:
Never take an OTA if you are on a custom rom with a custom recovery. Especially if you have SuperCID, unless you want a paperweight. If you want that OTA, you need to get you original CID, flash stock recovery, relock bootloader, then flash an RUU for your carrier.
Click to expand...
Click to collapse
Ok. ill look into that. sounds easy enough. last time i tried to update, i couldnt because of my cid. now i guess since there is an official t-mob i can do it?
You cant flash an ruu with super cid?
Oh and also, Once i update my hboot am i able to install the older ICS roms like maximus. thats just the most stable one i have found for my particular phone.
One more. Will i be able to restore my cid with s-off
ruu update
i relocked, then changed my cid to HTC__001
I triedto update via ruu exe file. but i got an error 155.
Im not sure how to update via the zip of the ruu. if its possible.
Also cant find any instruction or files for the original recovery.
I will try to install ota. hopefully i dont end up with a new frisbee.
If i were to extract the framwork.zip frim the ruu zip then install it via fastboot. would that give me the latest hboot. then maybe i could install the updates.
myphonesbetter said:
i relocked, then changed my cid to HTC__001
I triedto update via ruu exe file. but i got an error 155.
Im not sure how to update via the zip of the ruu. if its possible.
Also cant find any instruction or files for the original recovery.
I will try to install ota. hopefully i dont end up with a new frisbee.
If i were to extract the framwork.zip frim the ruu zip then install it via fastboot. would that give me the latest hboot. then maybe i could install the updates.
Click to expand...
Click to collapse
If you update your Hboot that kind makes it more difficult to flash custom roms. You should just find a nice custom jellybean rom, there are some good ones out there.
impostle said:
If you update your Hboot that kind makes it more difficult to flash custom roms. You should just find a nice custom jellybean rom, there are some good ones out there.
Click to expand...
Click to collapse
updating your hboot makes no significant difference (its a myth that its more difficult to flash custom roms on a later hboot).
im on latest hboot and can flash all things i want.
and if your device is S-off dont bother to relock your device/reinstall stock recovery. It will get overwritten anyways.
only thing important is to change the cid. you can always install a older hboot if s-off
have you tried the ruu.exe while in fastboot-usb?
real187 said:
updating your hboot makes no significant difference (its a myth that its more difficult to flash custom roms on a later hboot).
im on latest hboot and can flash all things i want.
and if your device is S-off dont bother to relock your device/reinstall stock recovery. It will get overwritten anyways.
only thing important is to change the cid. you can always install a older hboot if s-off
have you tried the ruu.exe while in fastboot-usb?
Click to expand...
Click to collapse
When I said it was more difficult I meant it was more work, having to flash the boot.img separately. If you are on a lower Hboot you don't have to do that. Also if you are going to suggest he do S-Off you should at least give him a warning about some of the issues people have ran into after doing it.
EDIT: Thats what I get for watching too many threads, I miss stuff.
impostle said:
When I said it was more difficult I meant it was more work, having to flash the boot.img separately. If you are on a lower Hboot you don't have to do that. Also if you are going to suggest he do S-Off you should at least give him a warning about some of the issues people have ran into after doing it.
Click to expand...
Click to collapse
he is already S-off. (see first post)
but anyways, if you dont do research before you do something, and it fuks up your device, its still gonna be your own fault.
what issues your talking about?
real187 said:
he is already S-off. (see first post)
but anyways, if you dont do research before you do something, and it fuks up your device, its still gonna be your own fault.
what issues your talking about?
Click to expand...
Click to collapse
I saw a thread about people losing 3g/4g data after an S-Off.
With S-Off you are made in the shade, you can downgrade your Hboot just by running the appropriate RUU. But you have to change your CID back to what is was before you try to flash the RUU.
impostle said:
I saw a thread about people losing 3g/4g data after an S-Off.
With S-Off you are made in the shade, you can downgrade your Hboot just by running the appropriate RUU. But you have to change your CID back to what is was before you try to flash the RUU.
Click to expand...
Click to collapse
I have seen the tread. But im scepitical, because if it really was only because of the s-off more people should have it. Might be hardware related.
Eh you do not have tot change back your Cid to original (if its a branded Cid the ruu still wont run), just a valid HTC Cid.
Verstuurd van mijn One S met Tapatalk
He could flash from recovery or fastboot flash any hboot he wants with s-off. No RUU needed for downgrade or upgrade. That's only needed to go back to stock for warranty purposes.
@myphonesbetter
If you want the red warning text overlay to be gone as well choose any of the files here and flash it within recovery. S-Off needed to do so!
To remove ***Tampered*** as well download hboot 1.140004. You will need to come from a lower hboot version so if you're already on >1.140004 flash one <1.140004 first.
--- edit ---
You can lock/unlock your phone as well by flashing. Read more in [how to] reset your lock status flag. Also it's in the Droid DNA forums it's valid for One S. Remember: You need s-off for this to work.
--- and one more ---
You can change your CID pretty simple on rootet devices. Just enter fastboot mode and type:
'fastboot oem writecid HTC__001'
Reboot bootloader then. You can find a collection of HTC ONE S CID's here
^^^^^Very helpful post. thank you. I wouldve never found that.
When you run the ruu .exe, do you have to be in fastboot or in android? The install app told me just to turn the phone on so i figured it would automatically go into bootloader. but it did nothing at all to my phone and gave me an error 115.
When i tried the ota it tells me that I am runnning an altrered OS and i will have to install it a different way.
Sorry for the easy questions. but i just cant seem to find any threads that say how to. I found the ruu and a zip of the ruu. but not how to install it.
The best sense rom has instructions on flashing a newer hboot. .but i want to install a completely stock rom.
myphonesbetter said:
^^^^^Very helpful post. thank you. I wouldve never found that.
.
Click to expand...
Click to collapse
guess you run out of thanks, no?
Never even noticed the thanks meter. I have more of a direct thank you approach.
I tried to flash the ruu .exe in fastboot. and it actually rebooted into the black htc screen, so i figure thats the way to do it.
Unfortunately I got another error. image error (159) use the correct rom and flash again.
I am attempting to flash 3.16.401.8 onto hboot 1.16 (relocked) i am s-off and i changed my cid to HTC__001 via fastboot.
Is there another way. or can i flash the zip in twrp or cwm? Again i just want an oem jelly bean with the proper hboot and radio and everything that the OTA would change. so i can be up to date before i move on to the JB roms.
Ive tried all of the custom ones, and the wifi cuts in and out. i used the wifi partition fix. and i flashed the latest radio. nothing helped for more than a few hours.
don't know what to say; normally you can flash whatever rom you want without problems;
guess 99% of users here did it.
however I can not understand what do you want to be full stock? warranty problems?
ultimul said:
don't know what to say; normally you can flash whatever rom you want without problems;
guess 99% of users here did it.
however I can not understand what do you want to be full stock? warranty problems?
Click to expand...
Click to collapse
Yah thats usually how it works for me. if it works for 99% of people with one step. ill have to do it manually with 20 steps. I guess its made me learn alot about adb and fastboot. I could never get adb to work untill i upgraded to windows 7 recently. until then i had to exract everything to my sdcard via terminal emulator and then drag it to my computer form the card and modify things. but ive been forced to learn quite a bit.
Its weird. I bought my phone off of craigslist from someone who had no idea how to root. But when i opened it into hboot it said Tampered and locked. with no signs of ever being unlocked. completely stock rom and no red warning text on the splash screen.
The reason i want to be stock it so i know all the correct partitions and everything are set up right. (that part i dont understand yet).
I know that a normal system wipe in twrp or cwm doesnt wipe everything. If i wipe and install the same rom i am using(just to clear it up and start over) it doesnt even wipe the app data. (at least on my phone)
Im thinking that its because i am installing a euro rom with a HTC__001 cid and mine was originally TMUS T-MOB010 .
one thing i noticed also is that windows could not verify either of the ruus i downloaded from shppied roms
How do i flash the ruu.zip that i downloaded? Do i need to rename it update.zip like the older phones? Its been a while.
Ok so i know im pretty much helping myself here but i hate when i come across threads with no conclusion.
I was able to succesfully update with the t-mob 2.35 ruu .exe thats on shipped roms .com so i know its not a problem with my computer.
still on hboot1.14 (thought i was on 1.16).
I changed my cid back to t-mob010.
Im just not sure why i cant update with the htc__001 with the 3.16 update.
Any help would be appreciated.
Ahh, things go on here! Nice! :laugh:
It's not quite clear if the RUU is the right one on this phone as many people report problems... So let's go OTA.
To flash the 3.16 OTA update your hboot needs to be < 2.15, your recovery needs to be the HTC stock one , your device needs to be relocked (not totally shure as mine wasn't at that time and it worked, but please remember that) and you need to have HTC stock system/ and stock data/ (ICS) files on your phone (you'll have to unroot as well, if rootet), as the OTA seems to check if certain files are present before working.
All that is quite a pain in the ass, isn't it?! So do one the following:
- Just make shure your bootloader version is lower 2.15, else flash a lower one.
- Click here and you'll have access to one of my google drive folders.
- Download the 2.31 zip. Unpack and copy these nandroid backup files into the appropriate TWRP folder on your phone, reboot into recovery and restore. Once done, you'll be able to flash the 3.16 OTA update after reboot. Remember to change CID before if you're on 11111111.
- Or download the 3.16 zip, unpack and restore. You'll have stock htc sense JB without the OTA. You don't even need to downgrade your bootloader in case. CID doesn't matter here.
- To root simply download SU_Bbox file and flash in recovery.
Important: With the JB update HTC invented disk write protection by default. This simply means that files deleted within stock sense JB will be back after rebooting the phone, also root was granted and working (still grats to htc for this one!!!). Check out for elemental x kernel at this point, as flar2 is the one offering additional modules for the stock kernel working around this. So you can be on stock JB as close as possible with write protection disabled.
--- edit ---
I nearly forgot: If you're experiencing WiFi troubles afterwards search for flashing wifi partitions.
--- and one more ---
myphonesbetter said:
I was able to succesfully update with the t-mob 2.35 ruu .exe thats on shipped roms .com so i know its not a problem with my computer.
still on hboot1.14 (thought i was on 1.16).
I changed my cid back to t-mob010.
Im just not sure why i cant update with the htc__001 with the 3.16 update.
Click to expand...
Click to collapse
Cause you're on 2.35 US. You need to be on 2.31 EU before, because 3.16 is EU and there is still no JB update to 2.35 US. 3.16 OTA will work with htc__001 (htc worldwide).
The OTA determined my OS was modified.
I could not restore the folder i took directly out of the zip.
There was a folder inside the folder that contained the same files. I was able to flash this.
My hboot is still at 1.14 my cid is not htc--001 relocked. the update was 650 mb of which i could not use wifi for becauese it just said error.
so 650 mb through tmobile. only took a few minutes but used almoast half of my months dl limit.
IDK. i found instructions on how to update the hboot in best sense roms thread. i will try that.
Edit: the restore for 3.16 worked in twrp. shouldve tried that first.
I may still update my hboot. I cant really find any instructions. Apparently the search just finds every thread and lists it.
If you are on the latest TWRP 2.4.3.0 go back to 2.4.1.0 (the latest one seems to have restore problems).
The folder contained in the zip needs to be copied to /TWRP/BACKUPS/HT23whatever/
You should be able to restore then.
--- edit
hehe, ok then.
You can flash any of these hboots from within TWRP. Up or down, it doesn't matter - you're s-off.
---------- Post added at 10:43 AM ---------- Previous post was at 10:32 AM ----------
CID should be HTC__001 not htc--001. Maybe a typo.
Hi, i had a S4 which got a broken screen and costs too much to fix a the moment so i brought a Telstra HTC ONE XL off a friend for $100.
I do like the phone but was over the 4.2.1 software as used to the 4.3 on the S4 which i rooted and put on CM10.
I tried with this phone to put on the nightly cm 10.3 but i hit a problem ,when install the nightlies it boot loops and when i try install the stable 10.1 it fails with an error which i do belive is to do with my V2 hboot.
I downloaded the RRU which is supposted to update the hboot to v3 then i can install cm10.3 (aparently) but when i run the rru it fails saying not for my phone.
RUU_EVITA_UL_JB_45_S_Cingular_US_3.18.502.6_Radio_0.24p.32.09.06_10.130.32.34_release_signed_With_Partial
I have unlocked through htcdev and rooted it ok.
Im stuck now though as i pressed backup current original rom which turns out its not.
The phone details are
CID TELST001
Model: HTC ONE XL TELSTRA
If someone can tell where to either find the newest telstra rru for my phone or how to update my hboot so i can use cm10?
My phone is pretty useless at the moment
stueee said:
I downloaded the RRU which is supposted to update the hboot to v3 then i can install cm10.3 (aparently) but when i run the rru it fails saying not for my phone.
Click to expand...
Click to collapse
Where are you getting CM from (link it) and what is the file named? CM will typically have the phone's code name (EVITA) in the file name. If the code name ENDEAVORU is in the file name, it is in fact for the wrong device, as the ENDEAVORU is for the quad core Tegra3 (non-LTE) version, which is completely different hardware.
Also, I don't know if 10.3 is even released yet for our device, or for the ENDEAVORU for that matter. I think you might be confused about what you are flashing. So again, link what you are trying to install.
The reason you couldn't run that RUU is because the CID check wouldn't allow it, it's looking for an at&t CID which you don't have. Getting s-off disables the security check which would let you run any Evita RUU but you need to get a ROM to boot first before you try that. You also need SuperCID.
Your best bet is probably to flash an older Sense ROM (4.0 or 4.1), then you can at least boot, and get SuperCID and s-off so you can run the 3.18 RUU to meet the requirements for the latest cm ROMs.
Sent from my Evita
timmaaa said:
The reason you couldn't run that RUU is because the CID check wouldn't allow it, it's looking for an at&t CID which you don't have.
Click to expand...
Click to collapse
For some reason, I got confused and thought the OP was saying that the ROM install was failing. But it clearly says the RUU (or "rru" anyway) failed.
But yes, you can only run an RUU for your carrier version. So you will need s-off to run the AT&T RUU (the RUU referenced in the OP).
But still confused about the mention of CM10.3. From what I can see, it doesn't exist for either our EVITA, or the ENDEAVORU.
Maybe he meant cm10.2 and it was a typo?
Sent from my Evita
timmaaa said:
Maybe he meant cm10.2 and it was a typo?
Click to expand...
Click to collapse
Could be. Although if so, its a type that appears twice.
It seems fairly common for folks to try to install the wrong CM (wrong device). So I want to make sure the OP isn't doing that.
redpoint73 - the CM i downloaded and installed was from http://get.cm/?device=evita and i tried
cm-10.2-20131030-NIGHTLY-evita.zip which installed but bootloops
and then i tried the stable - cm-10.1.3-evita.zip which gave me the failed error.
stueee said:
redpoint73 - the CM i downloaded and installed was from http://get.cm/?device=evita and i tried
cm-10.2-20131030-NIGHTLY-evita.zip which installed but bootloops
and then i tried the stable - cm-10.1.3-evita.zip which gave me the failed error.
Click to expand...
Click to collapse
Okay, neither of those are CM10.3, as stated in your first post. Please post accurate information to prevent form confusing those that are trying to help.
What hboot are you currently on? Its listed on the bootloader screen.
What version of TWRP?
You should be able to mount SD in TWRP, put a Sense ROM on the phone, and get back up and running.
Hi Red,
Sorry i typed out that post at almost 1am after pulling my hair out over a few hours and got a little confused.
My hboot is 2.15 and twrp is 2.6.3.0 which I believe is the latest.
What sense rom would work on mine as i really need this working now as i cant find a rom to suit anywhere with my lesser expertees.
I tried changing the cid using the super cid Telstra bat file but it won't recognize the phone as its not loaded, i tried in off state, bootloader, fastboot and twrp but is just keeps saying cant find phone.
I also tried the hex editor method but it didnt seem to update the CID after i completed it without errors.
thanks for you help.
redpoint73 said:
Okay, neither of those are CM10.3, as stated in your first post. Please post accurate information to prevent form confusing those that are trying to help.
What hboot are you currently on? Its listed on the bootloader screen.
What version of TWRP?
You should be able to mount SD in TWRP, put a Sense ROM on the phone, and get back up and running.
Click to expand...
Click to collapse
With 2.15 hboot, you cannot modify the files required for supercid.
You can try the ever so risky jet tool. But this tool deliberately bricks to downgrade your hboot.
Sent from my HTC One XL using xda app-developers app
Any recent Sense ROM will suit your current setup, have a look here and you'll find a whole bunch. Unfortunately for you the 2.15 hboot has write protection enabled so there's no way you can get SuperCID (abd therefore can't get s-off), at least not until an exploit is released.
When you tried to flash CM did you also flash the boot.img via fastboot afterwards? You're s-on so that's necessary to get it to boot. Phones on a higher hboot like yours are unable to flash the boot.img through recovery so it must be done manually.
All you do is retrieve the boot.img from the root of the ROM zip, put it in your fastboot folder on your PC, and after you've flashed the ROM in recovery you reboot to bootloader, connect the phone to the PC, open a command prompt from within your fastboot folder (shift + right click anywhere in the folder then select open command prompt here), then give the following command:
fastboot flash boot boot.img
Once that's done you can reboot the phone and it should boot into the ROM.
Sent from my Evita
stueee said:
My hboot is 2.15
Click to expand...
Click to collapse
That's pretty important. This is the reason why the older CM10.1 failed to install. CM was having issues with older hboots, so a script was added to require hboot 2.14.
Once hboot 2.15 came along, folks found that CM failed to install since the install script explicitly requires 2.14. Later versions include hboot 2.15 in the install script.
As exad and timmaaa mention, SuperCID (and therefore s-off) are not possible on hboot 2.15. So you are stuck with s-on (assuming that is what you are on now). It also means you can't currently run any RUU. Reason being, with s-on you can't run older RUUs, RUUs from another carrier, and there are no RUUs based on hboot 2.15. No "current" RUU exists (for your hboot), you can't run "previous" RUUs with the S-on restriction. So therefore you can't currently run any RUU.
But hboot 2.15 will work with newer versions of CM (and other AOSP ROMs which have been recently updated) as well as any Sense ROMs. But with s-on, you need to extract boot.img and flash manually with fastboot every time you install a ROM (as timmaaa points out). If you did not do this, this is why flashing the recent CM10.2 nightly resulted in a bootloop. Failure to falsh boot.img is the most common reason for bootloop after flashing a ROM.
stuck in bootloop
ive recently have been flashing different roms onto my htc one with no problem..then i decided to try the google play edition and realised i had to be s-off...now i have super cid 11111111 and s-off and was running skydagon 14.1 with no prob...today i did a nand backup and thought i would try the liquid rom then half way through the fresh install (i wiped cache and dalvik first)my phone shut down and boots up into a loop..if i go to recovery (twrp 2.6.3.3) it only stays in recovery a few seconds then goes back to the start of bootloop...i have tried cwmr also...i have otg cable and have used adb a few times however im not highly skilled so any help would be appreciated...apologies on the excessive post..
martin-m7 said:
ive recently have been flashing different roms onto my htc one with no problem..then i decided to try the google play edition and realised i had to be s-off...now i have super cid 11111111 and s-off and was running skydagon 14.1 with no prob...today i did a nand backup and thought i would try the liquid rom then half way through the fresh install (i wiped cache and dalvik first)my phone shut down and boots up into a loop..if i go to recovery (twrp 2.6.3.3) it only stays in recovery a few seconds then goes back to the start of bootloop...i have tried cwmr also...i have otg cable and have used adb a few times however im not highly skilled so any help would be appreciated...apologies on the excessive post..
Click to expand...
Click to collapse
You're in the wrong forum, buddy. This is the HTC One XL forum.
Hi guys,
I am on an old JellyBAM ROM (7.7.0), based on CyanogenMod 10.1.0 (Android 4.2.2). I want to try KitKat roms (4.4.2) such as latest CM 11 nightlies etc. So I want to know what all I need to do to get my phone ready to install 4.4 roms.
Some background:
I unlocked my bootloader using HTC Dev Token ID method, installed CWM recovery, and flashed my current and past roms that way - it has been around a year since I made any updates to my phone. So I think some of my firmware is not current enough to support 4.4 roms.
I am S-ON.
My main concern is that I have hboot 1.08. All the guides I see talk about either hboot 2.15 or 2.16.
Recovery: CWM v5.8.3.1
Phone is carrier-free Ville S4 processor. Currently service provider is Koodo - a division of Telus (in Canada).
CID: ROGER001
Radio: 0.16.31501S.02
From the reading that I did, what I understood is:
First I should S-OFF (to make things easier for any future playing around). I was thinking of using the Firewater S-OFF Tool (from http://www.androidpolice.com/2014/0...f-tool-will-unlock-any-htc-device-in-moments/)
I need to update my hboot. This is the step I am most worried about, as I have never flashed a RUU before, and that's what most guides say to do. This thread says to just run the JellyBean RUU [http://forum.xda-developers.com/showthread.php?t=2524306]. Would you say that's a pretty safe bet, or is that outdated advice/information?
Once I go S-OFF and update hboot to 2.15, can I just flash CWM (or TWRP) recovery, and flash CM 11 nightlies?
Thanks a lot!
arjundas86 said:
Hi guys,
I am on an old JellyBAM ROM (7.7.0), based on CyanogenMod 10.1.0 (Android 4.2.2). I want to try KitKat roms (4.4.2) such as latest CM 11 nightlies etc. So I want to know what all I need to do to get my phone ready to install 4.4 roms.
Some background:
I unlocked my bootloader using HTC Dev Token ID method, installed CWM recovery, and flashed my current and past roms that way - it has been around a year since I made any updates to my phone. So I think some of my firmware is not current enough to support 4.4 roms.
I am S-ON.
My main concern is that I have hboot 1.08. All the guides I see talk about either hboot 2.15 or 2.16.
Recovery: CWM v5.8.3.1
Phone is carrier-free Ville S4 processor.
Radio: 0.16.31501S.02
From the reading that I did, what I understood is:
First I should S-OFF (to make things easier for any future playing around). I was thinking of using the Firewater S-OFF Tool (from http://www.androidpolice.com/2014/0...f-tool-will-unlock-any-htc-device-in-moments/)
I need to update my hboot. This is the step I am most worried about, as I have never flashed a RUU before, and that's what most guides say to do. This thread says to just run the JellyBean RUU [http://forum.xda-developers.com/showthread.php?t=2524306]. Would you say that's a pretty safe bet, or is that outdated advice/information?
Once I go S-OFF and update hboot to 2.15, can I just flash CWM (or TWRP) recovery, and flash CM 11 nightlies?
Thanks a lot!
Click to expand...
Click to collapse
Whats your CID?
You don't need to be S-OFF if theres a matching RUU for you BUT you cant install lower HBoot versions while you're S-ON. Flashing a custom recovery is also possible while you're S-ON
LS.xD said:
Whats your CID?
You don't need to be S-OFF if theres a matching RUU for you BUT you cant install lower HBoot versions while you're S-ON. Flashing a custom recovery is also possible while you're S-ON
Click to expand...
Click to collapse
I am not sure - I have never checked it before.
I ran CID Getter app, and it's supposed to show me CID in red at the top, but it shows nothing. Some of the app comments say that if the CID is not shown, it means I am SuperCID. I'm not sure about that.
I'm at work, but when I get home, I'll run the fastboot command to find out the CID. I didn't do anything intentionally to get SuperCID, so is it likely that I might be SuperCID? How would I know?
arjundas86 said:
I am not sure - I have never checked it before.
I ran CID Getter app, and it's supposed to show me CID in red at the top, but it shows nothing. Some of the app comments say that if the CID is not shown, it means I am SuperCID. I'm not sure about that.
I'm at work, but when I get home, I'll run the fastboot command to find out the CID. I didn't do anything intentionally to get SuperCID, so is it likely that I might be SuperCID? How would I know?
Click to expand...
Click to collapse
SuperCID = 11111111
Other CIDs are listed here: HTC CID LIST
You can easiliy read the CID with WinDroid Toolkit 2.0
LS.xD said:
SuperCID = 11111111
Other CIDs are listed here: HTC CID LIST
You can easiliy read the CID with WinDroid Toolkit 2.0
Click to expand...
Click to collapse
Thanks for the toolkit.
cid: ROGER001
Btw, what's the purpose of going SuperCID?
Also, I don't want to install lower hboot. I am on hboot 1.08 and I think I need to install hboot 2.15. Right?
I guess S-OFF isn't absolutely necessary, but would be nice to have. Would you recommend using the S-OFF command from the toolkit you linked?
I Don't know which s-off Method is Best for your cid. Have you found matching RUU with hboot 2.15?
With superCID you can switch to other CIDs e.g. for unbranding your device Also it's needed for "Facepalm S-OFF" (Was the only working method for me)
Sent from my loved HTC One S using (most time buggy) Tapatalk
LS.xD said:
I Don't know which s-off Method is Best for your cid. Have you found matching RUU with hboot 2.15?
Sent from my loved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
I have seen a few options for RUU, but not sure which one I should use. I don't quite understand the relationships between phone parameters and which RUU to get.
The guide that I linked to in my first post, that I was thinking of using says the following one: (but they don't know what my CID is)
RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.5 0.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe
Androidruu.com has several other RUUs. I guess since my CID says Rogers, I should use one of the Rogers ones?
RUU_Ville_U_Rogers_WWE_1.70.631.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254139_signed.exe - 2013-01-29
or
RUU_Ville_U_Rogers_WWE_1.84.631.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265373_signed.exe - 2013-04-29
But my current provider is Koodo, which is a subdivision of Telus. So should I use one of the Telus RUUs?
RUU_Ville_U_TELUS_WWE_1.70.661.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254554_signed.exe - 2013-01-29
or
RUU_Ville_U_TELUS_WWE_1.84.661.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265367_signed.exe - 2013-04-29
I would appreciate any insights into what would be the applicable RUU?
Thanks.
arjundas86 said:
I have seen a few options for RUU, but not sure which one I should use. I don't quite understand the relationships between phone parameters and which RUU to get.
The guide that I linked to in my first post, that I was thinking of using says the following one: (but they don't know what my CID is)
RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.5 0.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe
Androidruu.com has several other RUUs. I guess since my CID says Rogers, I should use one of the Rogers ones?
RUU_Ville_U_Rogers_WWE_1.70.631.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254139_signed.exe - 2013-01-29
or
RUU_Ville_U_Rogers_WWE_1.84.631.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265373_signed.exe - 2013-04-29
But my current provider is Koodo, which is a subdivision of Telus. So should I use one of the Telus RUUs?
RUU_Ville_U_TELUS_WWE_1.70.661.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254554_signed.exe - 2013-01-29
or
RUU_Ville_U_TELUS_WWE_1.84.661.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265367_signed.exe - 2013-04-29
I would appreciate any insights into what would be the applicable RUU?
Thanks.
Click to expand...
Click to collapse
As long as you are S-ON you can only flash matching RUUs (Rogers). You will need to gain S-OFF to reach HBoot 2.15 as it seems.
LS.xD said:
As long as you are S-ON you can only flash matching RUUs (Rogers). You will need to gain S-OFF to reach HBoot 2.15 as it seems.
Click to expand...
Click to collapse
Okay. It seems that the best path forward for me is to S-OFF using the Firewater tool (since my device is HTCDEV unlocked/rooted, and having S-OFF means I won't need to unlock bootloader again after running RUU).
Then I'll run the newest Rogers RUU from AndroidRUU.
At this point, I should be on hboot 2.15 and still bootloader unlocked, right?
If I'm right about all that, then I should just have to install a custom recovery and be able to flash the 4.4 ROM I want. Correct?
arjundas86 said:
Okay. It seems that the best path forward for me is to S-OFF using the Firewater tool (since my device is HTCDEV unlocked/rooted, and having S-OFF means I won't need to unlock bootloader again after running RUU).
Then I'll run the newest Rogers RUU from AndroidRUU.
At this point, I should be on hboot 2.15 and still bootloader unlocked, right?
If I'm right about all that, then I should just have to install a custom recovery and be able to flash the 4.4 ROM I want. Correct?
Click to expand...
Click to collapse
Newest Rogers RUU ist HBoot 1.84 as it seems. Once you're S-OFF and have superCID you need to change your CID to unbranded (HTC__001) and flash e.g. unbranded RUU with HBoot 2.15.
LS.xD said:
Newest Rogers RUU ist HBoot 1.84 as it seems. Once you're S-OFF and have superCID you need to change your CID to unbranded (HTC__001) and flash e.g. unbranded RUU with HBoot 2.15.
Click to expand...
Click to collapse
Hmm... I see. Things are getting clearer, but still a little confused about SuperCID stuff.
Will running Tmobile US RUU work? That's the one from the guide I read in my first post. He suggests that RUU to get hboot 2.15.
Once I get S-OFF, then I should get SuperCID. I thought with SuperCID (i.e. 11111111), I can run any RUU. Or should I still manually set CID to HTC__001 before running Tmobile US RUU?
arjundas86 said:
Hmm... I see. Things are getting clearer, but still a little confused about SuperCID stuff.
Will running Tmobile US RUU work? That's the one from the guide I read in my first post. He suggests that RUU to get hboot 2.15.
Once I get S-OFF, then I should get SuperCID. I thought with SuperCID (i.e. 11111111), I can run any RUU. Or should I still manually set CID to HTC__001 before running Tmobile US RUU?
Click to expand...
Click to collapse
To run a RUU NOT MATCHING your stock CID you need S-OFF // SuperCID. You cant install TMobile RUU at first :/
I would act like this:
Run latest Rogers RUU --> READ FACEPALM GUIDE CAREFULLY. There is how to gain SuperCID and then S-OFF. Once done you can change CID to whatever you want and run a (unbranded) RUU with HBoot 2.15.
But that is just what i thought about it. I suggest to let someone else CONFIRM the way suggested by me first.
Have you tried anything yet? If NO. then STOP. Don't do anything and don't upgrade your firmware/hboot yet. It could happen you won't need this. I am on hboot 1.06 and I'm running fine any ROM including KitKat ones. That requirement for a higher firmware is coming from an old issue that was before with earlier Android versions (from the versions that used 3.4.x kernel and up), making SOME phones to misbehave (reboots or other issues). It could be that your phone handles it right and in that case you won't need to upgrade if you don't want to.
WHY? You should not only upgrade your firmware but also to S-Off. It is not required but it makes your life easier. And these procedures bear some risks even if they were successful for others. And why should you risk anything unless it's mandatory? The point is you have a hboot lower than 1.09. There are not to many left and people are tempted to forget, but hboot lower than 1.09 means you're like an S-Off. You can flash radios and kernels from recovery as on any other S-Off device. Only thing you can't do is to remove those red letters from the boot splash screen...that is you can't flash another firmware. But hopefully you might not need it.
OK. All these being said, I would suggest you to first try to see if the ROM works OK on your phone like it is and only if it doesn't you should think about S-Off, upgrading firmware and things like this.
Now, what you have to do is download the ROM you would like...any ROM, and before flashing it follow my guide HERE to change the updater script in the ROM's ZIP to allow flashing the ROM on lower hboots. It is very easy, I do this usually in 1 min, I would suggest to use method 2 that's much easier than to follow all detailed steps in method 1. If you have any questions or unclear things ask but I think it's easy enough.
If after this you cannot boot the ROM or have it working, then you can think of upgrading firmware
@Rapier
thank you for the provided help as usual
Are there any advantages by unsing HBoot 1.06?? I'm on 2.15 // S-OFF // SuperCID // No red letters // "tampered" removed
LS.xD said:
...Are there any advantages by unsing HBoot 1.06?? I'm on 2.15 // S-OFF // SuperCID // No red letters // "tampered" removed
Click to expand...
Click to collapse
For you? NO. You're better than me
The story is like this. I bought the phone in 2012. At that time, the highest hboot was 1.14 I believe (don't remember exactly) and there was no S-Off method available (they appeared later). There was something else tho. The lower hboots (1.09 and lower) permitted to write in the kernel partition or radio partition like an S-Off device. HTC then covered this in the higher hboots. So even if there was no S-Off method, there was a downgrade method that was used to downgrade the hboot from whatever you had to 1.09 or below. I downgraded mine to 1.06...don't ask why I didn't choose 1.09, I thought that was the RUU I considered to be fine for me at that time.
Now being on hboot 1.06 I can do anything except I cannot flash firmwares directly. So I cannot flash a new hboot with red letters removed for example. But I don't care about this...I can flash radios or kernels or splash screens like any S-Off user. The procedure for getting latest firmware and S-Off seems a little bit risky and I've read about alot of issues or problems from people who failed or tried countless times to reach that. So I've asked myself why should I do that if I don't need it?
Then it came the rumor and there were some brick cases of devices that were having some Android 4.3 ROMs and were not on latest firmware (in the meantime 2.13 and 2.15 hboots arise and also the S-Off method). It proved to be not the firmware fault after all. But CM team has included a check in the updater script of the ROM ZIP, to validate if the hboot was 2.13 or 2.15...if not, the flash won't happen. It's a simple assert command present there at the beginning of the script that do the check. As CM team was the pioneer in having the newest Android version ROMs available, everybody based initially their ROMs/builds on CM...so the check in the script was automatically carried over to all the ROMs out there. And it's still here.
As I've tested and I could run fine those ROM's (by removing the check before flash), I noticed that this requirement does not apply to everyone. Some could run fine the ROMs even if they're not on the "latest" firmware.
So that's why I am on 1.06...cause I don't know why should I go through some risky procedures when I don't need to.
Rapier said:
Have you tried anything yet? If NO. then STOP. Don't do anything and don't upgrade your firmware/hboot yet. It could happen you won't need this. I am on hboot 1.06 and I'm running fine any ROM including KitKat ones. That requirement for a higher firmware is coming from an old issue that was before with earlier Android versions (from the versions that used 3.4.x kernel and up), making SOME phones to misbehave (reboots or other issues). It could be that your phone handles it right and in that case you won't need to upgrade if you don't want to.
OK. All these being said, I would suggest you to first try to see if the ROM works OK on your phone like it is and only if it doesn't you should think about S-Off, upgrading firmware and things like this.
Now, what you have to do is download the ROM you would like...any ROM, and before flashing it follow my guide HERE to change the updater script in the ROM's ZIP to allow flashing the ROM on lower hboots. It is very easy, I do this usually in 1 min, I would suggest to use method 2 that's much easier than to follow all detailed steps in method 1. If you have any questions or unclear things ask but I think it's easy enough.
If after this you cannot boot the ROM or have it working, then you can think of upgrading firmware
Click to expand...
Click to collapse
I did read in more than one thread that you MUST have hboot 2.15 to install KitKat roms. Also, on CyanogenMod website, it says:
Firmware compatibility:
CM 10.1-11.0: HBOOT 2.13.0000, 2.15.0000, 2.15.4444.But no, I haven't done anything yet. So first of all, I'll make a nandroid backup and then just try factory reset, wipe cache/dalvik, and flash a CM 11 ROM, and see if it works. I'll post here whether it worked or not, I won't have time to do this until the weekend though.
Thanks, btw.
Rapier said:
WHY? You should not only upgrade your firmware but also to S-Off. It is not required but it makes your life easier. And these procedures bear some risks even if they were successful for others. And why should you risk anything unless it's mandatory? The point is you have a hboot lower than 1.09. There are not to many left and people are tempted to forget, but hboot lower than 1.09 means you're like an S-Off. You can flash radios and kernels from recovery as on any other S-Off device. Only thing you can't do is to remove those red letters from the boot splash screen...that is you can't flash another firmware. But hopefully you might not need it.
Click to expand...
Click to collapse
I don't get what you're saying. It is still worth getting S-OFF, or it is not?
arjundas86 said:
I did read in more than one thread that you MUST have hboot 2.15 to install KitKat roms. Also, on CyanogenMod website, it says:
Firmware compatibility:
CM 10.1-11.0: HBOOT 2.13.0000, 2.15.0000, 2.15.4444.But no, I haven't done anything yet. So first of all, I'll make a nandroid backup and then just try factory reset, wipe cache/dalvik, and flash a CM 11 ROM, and see if it works. I'll post here whether it worked or not, I won't have time to do this until the weekend though.
Thanks, btw.
I don't get what you're saying. It is still worth getting S-OFF, or it is not?
Click to expand...
Click to collapse
I beg to differ answering first:
Just try if you can install your preferred rom, AFTER you edited the "updatescript" as suggested by @Rapier.
IN CASE you have problems with the new rom you should get S-OFF + upgrading HBoot to 2.15+
LS.xD said:
I beg to differ answering first:
Just try if you can install your preferred rom, AFTER you edited the "updatescript" as suggested by @Rapier.
Just IN CASE you have problems with the new rom you should get S-OFF + upgrading HBoot to 2.15+
Click to expand...
Click to collapse
Yes, you're right. That's what I meant. I will delete the updater-script lines that Rapier mentioned before trying to install CM11.
If it doesn't work, at least I can restore to my backup, without risk of bricking.
Then I can try the hboot update and s-off if required.
Thanks.
arjundas86 said:
I did read in more than one thread that you MUST have hboot 2.15 to install KitKat roms. Also, on CyanogenMod website, it says:
Firmware compatibility:
CM 10.1-11.0: HBOOT 2.13.0000, 2.15.0000, 2.15.4444....
Click to expand...
Click to collapse
Yes, they say so. Then I'm the living proof that this requirement is not true...sorry for that. I've explained above to LS.xD where this requirement came from. The point is that you might have the ROM working even if you're on 1.08 and in this case you won't need to upgrade if you don't want
arjundas86 said:
...I don't get what you're saying. It is still worth getting S-OFF, or it is not?
Click to expand...
Click to collapse
It's depending on what you want. If you want to get rid of that red warning, to have the latest hboot and to have less trouble when flashing ROMs then yes, it worth it. If you just want to upgrade your firmware to 2.15 (to match the ROM requirements) but do not want to make the S-Off, you will have to flash the kernel separately in fastboot mode, after each ROM flash. Also you won't be able to flash a radio. That's why I said that if you are going to upgrade the firmware you should get S-Off as well
BUT, if you're NOT going to upgrade your firmware and you'll be lucky to have the ROM working, you won't need to S-Off since your current hboot is lower than 1.09 and allows you to flash radios and kernels directly from recovery.
And at this point, as you said, it worth a try like you are now and only if it's not working like this you should upgrade and do S-Off. I guess is much easier and less risky to remove 4 lines from that script and flash the ROM to see if it's working, than to go through the firmware upgrade & S-Off procedures
Rapier said:
Yes, they say so. Then I'm the living proof that this requirement is not true...sorry for that. I've explained above to LS.xD where this requirement came from. The point is that you might have the ROM working even if you're on 1.08 and in this case you won't need to upgrade if you don't wantIt's depending on what you want. If you want to get rid of that red warning, to have the latest hboot and to have less trouble when flashing ROMs then yes, it worth it. If you just want to upgrade your firmware to 2.15 (to match the ROM requirements) but do not want to make the S-Off, you will have to flash the kernel separately in fastboot mode, after each ROM flash. Also you won't be able to flash a radio. That's why I said that if you are going to upgrade the firmware you should get S-Off as well
Click to expand...
Click to collapse
Hey Rapier,
I'm having trouble doing getting the zip signed.
I tried the zip signer you had in your guide, as well as a bunch of other zip signing programs, but none of them seem to do the job. I keep getting Error: Status 7.
Not getting bootloops or anything like that, so I was able to restore to my backup. No harm done.
Hi everyone, first of all thanks for any support you may give, I was really hoping to figure this out on my own but I've ended up with 20+ tabs open on the subject and don't seem to be getting anywhere.
So on to issue: Recently fished out my old HTC One S as a friend wants to buy it, however the custom ROM I had installed crashed when using the camera so thought I'd get this all updated for him before he takes it off me, but things have moved on a lot since I was last here, and I'm now stuck getting everything updated.
I currently have hboot 1.13, s-on and root, and my CID is HTC__001
It appears most ROMS now require either hboot 2.15 or 2.16. I incorrectly thought hboot was related to recovery, so I tried to flash latest twrp, but now phone reboots everytime it gets to lock screen, I can still get into fastboot using adb, but I can't access recovery, and I'm now stuck. So any thoughts or input on how to proceed from here would be amazing!
TL:DR:
Currently on Hboot 1.13 with s-on, need to update to 2.15. Phone keeps rebooting, can access fastboot but not recovery. help.
Thanks again, Andrew.
Update: Solved
I resolved my issue by re-locking the bootloader, and installing one of the latest RUUs with hboot 2.15. I could then unlock the bootloader again, flash the latest twrp recovery and get back to installing custom ROMs.
You'll need to flash a recovery with adb. I can't remember if you can do that with S-On, but I don't see why not.
The command is something like: adb flash recovery name-of-recovery.IMG but I don't have my notes with me.
FYI, I always had to run the command twice for it to "stick".
You'll also have to find an older recovery.
Sorry I don't have the actual commands handy, but it shouldn't be too hard to find.
Edit:
Or, you can run the RUU.
Awesome thanks, I just need to find the right recovery and RUU now. I've had a look on Teamwins website and oldest version I can find is 2.1.6, but there is no documentation to say which hboot this supports, however I have a funny feeling I'll need an older version than even that, any ideas where I could find the correct recovery to flash? Thanks again.