Hello!
This is a little complicated. I have an XE and I wanted to upgrade from 2.3 (HBOOT 1.18). I tried to S-OFF first with revolutionary, but it didn't work (not even with tacoroot). Then I wanted to unlock the bootloader with the HTCDev method, I have the Unlock_code, uploaded it with fastboot and then selected yes. The phone reboots but it's still LOCKED. I repeated a few times, but no success.
I thought, OK the stock ROM by HTC is enough. I installed 4.0 with the newest RUU (HBOOT 1.29). This is where the bad things started. The installer worked well, but I couldn't start my phone anymore. It is stucked in bootloop. I tried to downgrade (with RUU and flashing zip with fastboot), no success.
So: S-ON, locked bootloader, bootloop... what could I do? Oh and when I plug in the USB cable, the phone turns on by itself.
Please help! Thank you!
from fastboot post the output from this command
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.153
(bootloader) serialno: HT__________
(bootloader) imei: 35_____________
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813001
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3845mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.485s
hakosh said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.153
(bootloader) serialno: HT__________
(bootloader) imei: 35_____________
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813001
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3845mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.485s
Click to expand...
Click to collapse
i think you have limited options
try to flash the ruu manually(via bootloader)
from the ruu thread see how to do it
rzr86 said:
i think you have limited options
try to flash the ruu manually(via bootloader)
from the ruu thread see how to do it
Click to expand...
Click to collapse
I tried this many times with multiple versions. I can't downgrade and with v3.33 I have the described problem
Related
Hello,
My desire s is damaged, and i want to send it to HTC to get it fixed,
But my device has a custom ROM and is S-ON.
But i would like to change it back to stock, so they cant see that i put i custom rom on it.
I have searched several threads, but i got stuck with finding the correct RUU.
Fastboot getvar all:
c:\android-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0002
(bootloader) version-baseband: 3822.10.08.04_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.10.401.8
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ebd3df7d
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
It is the europe unlocked one, but i can't find it in the Filefactory list.
And is there a way to remove 4EXT recovery and get the stock one?
Thanks,
And what is this then?
amidabuddha said:
And what is RUU_Saga_S_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed.exe this then?
Click to expand...
Click to collapse
Thanks, worked great! :good:
Hy guys. It's my first post so I would like to say Hello to the community!
Anyway. I have a question about my One S main version.
When I hit the getvar all command here's what I get:
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ++++++++++++++
(bootloader) imei: ++++++++++++++
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: TIM__401
(bootloader) battery-status: good
(bootloader) battery-voltage: 3892mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.086s
As you see, the "(bootloader) version-main:" is empty!!! This is a problem cause I can't even flash the official TIM RUU because it gives me error 155 (after locking the bootloader of course). Besides, when I start the installation it won't recognize the main version.
Somy question is. What do I have to do to get the main version up in there? Got to flash a new firmware or what? Help me out. Thanks a lot!!
Nobody has an idea?!?
Florin_CR said:
Nobody has an idea?!?
Click to expand...
Click to collapse
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.16.0000
(bootloader) version-baseband: 1.20.50.05.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ***************
(bootloader) imei: ***************
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4126mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4958290506
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.075s
C:\fastboot>
I don't think it matters, look at mine, same thing. I have run RUU.exe a bunch of times.
The difference is I have run the correct RUU for my CID #. Maybe the official TIM Cid you mentioned is for the older Hboot. You have the newer 2.15 Hboot and you cannot go backwards unless you S-off your device.
Thanks a lot! Now I know how to proceed!
Sent from my HTC One S using XDA Premium 4 mobile app
I have Htc sensation 4G with T-mobile locked. I have unlocked bootloader with Htc.com/dev.
But Somehow I have corrupted android GB on it while trying solution from here.
http://forum.xda-developers.com/showthread.php?t=1614617
I have tried installing rmk-pyramid-stock_ics_3.32.401.3-v1.zip ( mentioned in above link) with help of 4ext recovery but it is not booting I wiped/formatted each partition. . Every software try to boot in android mode which I don't on my device.
Hboot is 1.18.000
I am a noob in this field. I would be thankful if you help me.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.18.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.50.531.1
(bootloader) serialno: SH189T504362
(bootloader) imei: 355066048850707
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4041mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 9d24123f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Did you flash the boot.img after installing the rom?
Sajito said:
Did you flash the boot.img after installing the rom?
Click to expand...
Click to collapse
Yes, I did with boot.img extreacting from rmk-pyramid-stock_ics_3.32.401.3-v1.zip.I have tried many times. I have also tried jhboot.img, PG58DIAG.img,nbh of 3.12 & 3.33.
My phone is s-on.
rht125 said:
Yes, I did with boot.img extreacting from rmk-pyramid-stock_ics_3.32.401.3-v1.zip.I have tried many times. I have also tried jhboot.img, PG58DIAG.img,nbh of 3.12 & 3.33.
My phone is s-on.
Click to expand...
Click to collapse
the ics rom won't boot with gingerbread firmware
flash this rom from recovery
http://www.4shared.com/zip/NVqsJkGIba/2084011_stock_rooted_signed-FI.html (GB rom)
before flashing the rom:
format all partitions except sdcard from 4ext
enable smartflash from 4ext(because you are on S-ON)
flash the rom
done
after that use this method for S-OFF
http://revolutionary.io/
This update is wonderful. but revolutionary is just taking time & running for hours on both linux & windows..
Zerging root.. this might take a min. or so...
rht125 said:
This update is wonderful. but revolutionary is just taking time & running for hours on both linux & windows..
Zerging root.. this might take a min. or so...
Click to expand...
Click to collapse
i never used revolutionary method i don't know what to suggest
just keep trying
Hi I got S-off using http://unlimited.io/juopunutbear.htm & above mentuined link. but my network sim is stll blocked. It is still asking code.
Please help..
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.17.2008
(bootloader) version-baseband: 10.14.9035.01_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.24.401.1
(bootloader) serialno: SH189T504362
(bootloader) imei: 355066048850707
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: ENG
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3f6ba3d6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
I have upgrade firmware to 3.33 & installed rmk-pyramid-stock_ics_3.32.401.3-v1.zip successfully.
It is s-off but still network locked. Please help..
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1100
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: SH189T504362
(bootloader) imei: 355066048850707
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4090mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
rht125 said:
I have upgrade firmware to 3.33 & installed rmk-pyramid-stock_ics_3.32.401.3-v1.zip successfully.
It is s-off but still network locked. Please help..
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1100
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: SH189T504362
(bootloader) imei: 355066048850707
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4090mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
To get sim unlock you need to follow this guide http://forum.xda-developers.com/showthread.php?t=1232107.
I don't know how it's handled in your country, but in germany after 2 years you can let the provider remove sim lock for free, maybe you could try that too.
Both method don't work..
In adb shell method ( the command "strings -n 8 /dev/block/mmcblk0p6") in Windows
Pls see attachment, Why T-MOB010 is written above IMEI ? ( last 3-4 lines )
Strangely , my htc got sim unlocked itself.
I put a cdma sim in it. Android start updating & showed no network. Then I put my gsm sim & it started working.
Prior to this, my htc was synced with htc sync on windows.
Thanks to all.
My Villec2 is Bricked, i can't boot it it's only going in bootloader, i tried different RUU but to no avail
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.01.0000
(bootloader) version-baseband: 16.11.20.24_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.19.415.103
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA331W402623
(bootloader) imei: 352762052797742
(bootloader) meid:
(bootloader) product: villec2
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PJ4020000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: low
(bootloader) battery-voltage: 3579mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 9006d003
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.503s
use this RUU http://androidruu.com/?developer=VilleC2 and search for RUU_VILLEC2_U_ICS_40_HTC_Europe_1.11.401.110_Radio_16.12.20.02U_16.05.20.16_M2_release_263510_signed.exe
JavierG123 said:
use this RUU http://androidruu.com/?developer=VilleC2 and search for RUU_VILLEC2_U_ICS_40_HTC_Europe_1.11.401.110_Radio_16.12.20.02U_16.05.20.16_M2_release_263510_signed.exe
Click to expand...
Click to collapse
Tried already, it gives error on Signature Verification
hassaan_july said:
Tried already, it gives error on Signature Verification
Click to expand...
Click to collapse
your bootloader is unlocked? you have to locked again
fastboot oem lock
JavierG123 said:
your bootloader is unlocked? you have to locked again
fastboot oem lock
Click to expand...
Click to collapse
Yes it is locked and it's S-On
try this http://forum.xda-developers.com/showthread.php?t=2497614
After playing around with roms a while back i cannot get the phone back to stock.
When trying to flash roms in TWRP i get an error saying /sdcard/ cannot be mounted.
When running RUU's none of them work, even with a locked bootloader.
Please help i cannot find the right RUU.
Here is my fastboot getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.13.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT24EW400709
(bootloader) imei: 359901042499018
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3721mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-26dff973
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.114s
Click to expand...
Click to collapse
Still can't find stock rom
I also cannot get the phone into S-off to flash any RUU because when i try to SuperCID, it says "/sbin/sh su not found"
When trying to flash roms:
Warning: No file_contexts
could not detect filesystem
FIXED:
Flashed stock recovery
Factory reset
Installed TWRP
Install viper
Wiped cache