[Q] Yarvik Xenta 7ic Custom ROMs (RK3066) - General Questions and Answers

I have a Yarvik Xenta 7ic but the original firmware is rather unstable (drops/disables WiFi, random reboots) while playing games. I'vee been trying to get it to run custom/original ROMs from similar RK3066 devices (Nextway F7, Hyundai Hold x700 (BT version), Pipo Ultra U2). Only one Pipo U2 ROM has worked but without tilt detection. I've also been trying to get Oma's RK3066 ROM (crewrktablets.arctablet.com/?p=1913) to work but only the lastest CM 10.1 v1.3.2 boots but it constantly force closes com.android.phone.
I've been flashing only the system.img from Oma's ROM. The rest (parameter, boot.img, loader, kernel.img, etc.) I ripped from the original firmware. I already got CWM from this site: androtab.info/clockworkmod/rockchip/rk3066/
Questions:
Any other ROMs I could try?
How do I get rid of the com.android.com FCs?
Did I make a mistake while flashing Oma's CM ROM?
SoC: Rockchip RK3066
Audio: Realtek ALC5631
Sensor: MMA7660
Flash: Micron 29F64G08CBABA
Touch controller: GOODIX GT801
HDMI controller: THine THC63LVDM83D
RTC: Volcos VC8563S
RAM: 4x Hynix H5TQ2G83CFR
WLAN+BT: Rockchip Modul RK908

This one? http://forum.yarvik.com/forum/xenta...-200-xenta-7ic-android-4-1-1-jelly-bean-stock
Kernel is here: http://crewrktablets.arctablet.com/?wpfb_dl=995
Use packs as they are, only change the kernel. Flash acc. to instructions incl. eraseIDB.
- Oma -

Oma7144 said:
This one? forum.yarvik.com/forum/xenta-series/firmware_ae/2908-tab07-200-xenta-7ic-android-4-1-1-jelly-bean-stock
Click to expand...
Click to collapse
Actually, there is an updated firmware. Here: forum.yarvik.com/forum/xenta-series/firmware_ae/3893-tab07-200-xenta-7ic-android-4-1-1-jelly-bean-january-2013-update (I can not post outside links since I am a new user)
Could there be any benefits in extracting the kernel from that firmware?
Since I'm planning to buy this tablet and connect it to a USB DAC, can anyone tell me if the Crew RKTablets rom supports usb audio (snd-usb-audio module)?
Thanks for your work.

Need ROM for TAB13-201,
Hello there,
I have a bricked Yarvik Xenta 13c tablet. Need a ROM to bring it back to life.
Any suggestions or advice .
Thanks in advance.
---------- Post added at 04:31 PM ---------- Previous post was at 04:29 PM ----------
Hello there,
Am desperate for a ROM for YARVIK xenta 13c tablet. Pls cud u advice where I can find one.
or any idea how I can unbrick my tablet.
Tablet is hard bricked, Rockchip RK3066

Related

Allview development

Why there aren't any topics for the Romanian manufacturer www.allview.ro? They make pretty good devices, with nice specs and a reasonable price.
Yeah i would love that :thumbup:
Sent from my ALLDRO2SPEED using XDA
There are no threads... lemme think...
Oh right! They just take Chinese and other phones/tablets/devices, and rebrand them. Try to find the original device, and you'll most probably find them here.
There is one device what I've exactly recognized:
Allview AllDro Speed - this is the Pioneer Aurora (LY-F1)
any news about allview other devices? i'm using alldro speed 3g with internal modem and would love a custom rom
i could try to start a kernel development project...but first we need recovery
+1 about this....I really want to buy an Allview tablet and it would be really apriciated a thread here on XDA
Allview Alldro 3 Speed Quad = Onda V972 ?
What do you think guys? Are these two one and the same?
Allview Alldro 3 Speed Quad
Onda V972
And I have this issue after I install the latest firmware JB 4.2.2. from Onda V972: http://youtu.be/sULa5OLbgW0 .
Any suggestions?
any new about alldro 3 speed quad?
dancrow said:
What do you think guys? Are these two one and the same?
Allview Alldro 3 Speed Quad
Onda V972
And I have this issue after I install the latest firmware JB 4.2.2. from Onda V972: http://youtu.be/sULa5OLbgW0 .
Any suggestions?
Click to expand...
Click to collapse
Why do you removed the video?
You have discovered any news about alldro speed quad rooting, or firmware replacement? I have one of them, and i want to root, or replace the lazy official firmware....
RobiGo said:
Why do you removed the video?
You have discovered any news about alldro speed quad rooting, or firmware replacement? I have one of them, and i want to root, or replace the lazy official firmware....
Click to expand...
Click to collapse
The problem was fixed by installing the latest software version from Allview official site.
There are no firmware replacement right now (or I couldn't find one till now).
If you what to root your Allview Speed quad device you can do it like this View attachment 2252943
dancrow said:
The problem was fixed by installing the latest software version from Allview official site.
There are no firmware replacement right now (or I couldn't find one till now).
If you what to root your Allview Speed quad device you can do it like this View attachment 2252943
Click to expand...
Click to collapse
Thank You for reply!
Yesterday i flashed it with new official firmware, http://www.allview.ro/index.php?id=1637 it is awesome, the tablet is completely changed, is very fast, with no lags...
For rooting with new 3.2.1.4 official Allview firmware, i used
Root_Allview_Alldro3S_Quad_4.2.2_V3.2_LZ.zip (1.6 MB)
https://mega.co.nz/#!xtMwSJBT!cSBNcHXKYFJeh5pwdxRZAiP3TV06coLEeZ7eVh_CPhU
and works well
for firmware replacement i hope will work with Cyanogenmod port for Onda 972 ported by Christian Troy but is not tested yet
http://forum.xda-developers.com/showthread.php?p=45522946
I think, the Speed Quad is clone of Onda 972 V1 or V2, but more possible it is V1 (the firmware version is same (3.0, 3.2.1), appear with little delay after Onda official firmwares, and in the firmware version in Settings/About is marked the V1) so is hopefully to will work with Cyanogenmod port for Onda...
RobiGo said:
Thank You for reply!
I think, the Speed Quad is clone of Onda 972 V1 or V2, but more possible it is V1 (the firmware version is same (3.0, 3.2.1), appear with little delay after Onda official firmwares, and in the firmware version in Settings/About is marked the V1) so is hopefully to will work with Cyanogenmod port for Onda...
Click to expand...
Click to collapse
I already try it before. It does not work with any of Onda firmware or Cyanogenmod. It needs a compatibility pack and drivers for wireless and camera. I don't remember if was also an issue with screen resolution and orientation.
We should try to post on this romanian forum or this one, or on softpedia
dancrow said:
I already try it before. It does not work with any of Onda firmware or Cyanogenmod. It needs a compatibility pack and drivers for wireless and camera. I don't remember if was also an issue with screen resolution and orientation.
We should try to post on this romanian forum or this one, or on softpedia
Click to expand...
Click to collapse
Which version you tested? V1 or V2 hardware version firmware? I have an idea where come the wireless incompatibility... the 972 has not have bluetooth, maybe Allview requested this hardware modification for bluetooth support...
So, does anyone know what other brands sell Gionee GN 715 aka Allview Viper S4G ? I found condor c7 sold by condor.dz
I am also foarte interested in an Allview phone replacement for the good old n7000 (still working perfect from day 1, rooted and running 5.1.1 Nightowl) and also interested in finding ways to update it after manufacturer support ends, so a big thumbs up on this topic.
PS: Probabil ar trebui sa ne apucam noi de development, intr-o buna zi vom avea si un thread XDA dedicat, asta pentru ca Allview nu este distribuit in toata Europa si/sau America.
Allview viper L is known as Gionee elife 3.
Can anyone check out this thread and try to help?
RobiGo said:
Thank You for reply!
Yesterday i flashed it with new official firmware, http://www.allview.ro/index.php?id=1637 it is awesome, the tablet is completely changed, is very fast, with no lags...
For rooting with new 3.2.1.4 official Allview firmware, i used
Root_Allview_Alldro3S_Quad_4.2.2_V3.2_LZ.zip (1.6 MB)
https://mega.co.nz/#!xtMwSJBT!cSBNcHXKYFJeh5pwdxRZAiP3TV06coLEeZ7eVh_CPhU
and works well
for firmware replacement i hope will work with Cyanogenmod port for Onda 972 ported by Christian Troy but is not tested yet
http://forum.xda-developers.com/showthread.php?p=45522946
I think, the Speed Quad is clone of Onda 972 V1 or V2, but more possible it is V1 (the firmware version is same (3.0, 3.2.1), appear with little delay after Onda official firmwares, and in the firmware version in Settings/About is marked the V1) so is hopefully to will work with Cyanogenmod port for Onda...
Click to expand...
Click to collapse
I know this is longshot, but do you still have the original ROM for the Allview 3 Speed Quad HD tablet?
Every link I come across is invalid
Or do you have any other ROM you use?

INFOTM InfoTMic china MID tablet PC (M799RB) ROMS

Hi everyone ! Sorry form my EN
I have one infotm (infotimic) 7'' tablet with WiFi, camera, 2 usb, 1 hdmi. with out bluetooth, GPS, magnetic sensor and more
Android info apk write for ARM v6 compatiblete 375Mb ram 2Gb mem. 800X480 android 2.3.3
Model OV-BT-02 overmax (infotimic M799rb)
I find more roms from site overmax when have tou mach same tablet whit diferend cpu.
I have problem if i update in android 4 rom from same tablet white diferend cpu ? (A10)
Any can download many differends roms and source code (for android 2.3.3) from
http :// overmax .pl
i have also one of this devices, but i think i have a brick. i tried to flash a wrong firmware, now i can boot only into the bootloader to use the IUW Tools but it won't burn the file to the internal storage any suggestions to fix it?
thanks in advance
mik
P.S. on the overmax website is a new rom wich helps me to fix my broken device

[Recovery] TWRP + CWM for TrekStor SurfTab Ventos 9.7 / rk3066

Hi everyone,
I compiled two recovery images for the TrekStor SurfTab Ventos 9.7 tablet (Rockchip / rk3066 based), both seem to work on my device but need more testing.
Currently I am cleaning up the patches and preparing them for review and I hope the changes that were required get merged upstream.
You will find those images here: http://www.deadlock.dhs.org/rk3066/progress.html
I use rkflashtool under Linux to flash (check your partition addresses! the below example works on my device):
Code:
rkflashtool w 0x00010000 0x00008000 < filename.img
I'd be happy to get feedback, I did some testing but I surely did not check everything, so let me know if I missed something or if something does not work as expected.
There is no warranty of any kind, it works for me but I'm not responsible if your device goes up in flames or stays dead forever.
Kind regards,
Jin
Hi
I've emailed you about the 10.1 image you released and its potential to work on a device I am currently developing on - the Sumvision Voyager 10.1".
Shiftone said:
Hi
I've emailed you about the 10.1 image you released and its potential to work on a device I am currently developing on - the Sumvision Voyager 10.1".
Click to expand...
Click to collapse
I have a Rockchip tablet (RK3066), iberry Auxus Corex2 (http://www.iberry.asia/corex2_3g.php). Please let me know if you have a ROM based on CM 10.1 (JB 4.2.1). Thanks in advance!
s.rahus said:
I have a Rockchip tablet (RK3066), iberry Auxus Corex2 (http://www.iberry.asia/corex2_3g.php). Please let me know if you have a ROM based on CM 10.1 (JB 4.2.1). Thanks in advance!
Click to expand...
Click to collapse
I did not have time to continue on this yet, so did not try anything beyond recovery. Rockchip seems really a PITA, kernel is not fully open and there seem to be a lot of bugs here and there.
Hi,
Even if this thread will be taken out from the dead i just wanted to express my thanks as your mkbootimg helped me identifying the problem why my rockchip pad didn't want to start the cwm recovery.
Thanks and its a pity you stopped hacking android

Kernel 4.1 or 4.2 For A13 Tablets

Hello to you all,
I am starting to build a rom for Allwinner A13 tablet. And I want to ask you some basic questions.
I got my hands on a FreeLander PD60:
Cpu A13, Gpu 400 Mali, 8Gb nand Flash , Wifi
A. Does 4.1 and/or 4.2 run on it the same as 4 ICS?
B. What kernel should I use and where could I download it?
C. Any other subject if you think worth mentioning?
I was very interested to hear from you guys.
Plz give a little time to point me to the right direction:'(
I have device with A13. I tried to compile kernel, but no luck. I could not boot Android system - Problem with proper mali configuration and crushing of surfaceflinger. Everything should work except camera and hardware video decoding (video decoder mainly build for android 4.0) and maybe touchscreen will not work (test sources for your touchscreen chip). Look to Olimexino.com forum (they manufacture A13 board)

[rom] CyanogenMod 10.1 for Allwinner A31 (SDK 3.2) devices - 2013-07-15 update

If you appreciate my work and would like to support me with a small donation you can click on
button.
If every happy user of this rom would just donate something I could invest more time in all these Android projects.
Issues and possible workarounds
* Accelerated video playback is supported by MX Player in HW+/HW mode and pretty much every file will play, try both playback method because it depends on the video codec; I noticed that HD videos plays better in HW+ mode while SD (XviD for example) play better in HW mode. For a better audio support (included DTS playback) have a look here.
* HDMI shows a picture but it doesn't fill the TV screen entirely.
* Probably other things...
Features
* USB GPS support (cp210x and pl2303)
* Xbox 360 gamepad support (xpad)
* PS3 USB gamepad support (hid-sony)
* Generic / chinese (Pantherlord / GreenAsia) gamepads support (hid-pl and hid-gaff)
* OpenVPN support (tun)
* Veno congestion control algorithm
* USB audio
* USB bluetooth (It supports only CSR devices, they can be identified typing "lsusb" from an app like "terminal emulator": the supported device will be present with an entry like "Bus 001 Device 002: ID 0a12:0001" ("0a12:0001" is the supported VIDID). Do not boot with the bluetooth plugged in; plug it once you booted to android.)
Instructions
* You need TWRP to be able to flash this rom. Read the linked thread for instructions.
* Put rom (cm-10.1-$DATE-UNOFFICIAL-spark.zip) and gapps (gapps-jb-$DATE-signed.zip) files inside internal or external sdcard.
* Turn on the tablet in recovery mode as explained in TWRP thread.
* If this is your first install select "Factory reset" from "Wipe" menu.
* Flash rom (cm-10.1-$DATE-UNOFFICIAL-spark.zip), gapps (gapps-jb-$DATE-signed.zip) and, if you're installing this rom on a device that is not the Spark, the required compatibility zip.
* Now select "Reboot".
* Enjoy CyanogenMod 10.1!
Changelog & download links
2013-07-15
* Added USB bluetooth support
* Fixed a typo, try 3G dongles again and report if they're working now
* Updated upstream sources
ROM (md5sum)
Gapps
Compatibility zips
Only devices with a stock SDK 3.2 firmware can be supported.
* Onda V972 (v1) (v3.2 based) 3.2_rc1
* Onda V972 (v2) (v3.2 based) 3.2_rc1
* Onda V973 (v1) (v3.2 based) 3.2_rc1
* Onda V973 (v2) (v3.2 based) 3.2_rc1
* Onda V811 (v3.2 based) 3.2_rc1
* Onda V812 (v1-v4) (v3.2 based) 3.2_rc1
* Onda V812 (v5) (v3.2 based) 3.2_rc1
* Onda V813 (v3.2 based) 3.2_rc1
* Onda V818 mini (v3.2 based) 3.2_rc1
FAQs
* If your devices doesn't have a volume rocker you can install one of these apps to control volume from the notifications: Volume in notification, TrayVolume
* WiFi now can stay enabled with display turned off. Note that if WiFi is enabled the tablet won't enter deep sleep so if you're more interestead in battery life instead of an always on WiFi change policy (on "Advanced" WiFi settings) from "Always" to "Never" and select your preferred WiFi timeout.
* Internal memory is mounted at /storage/sdcard0, external sdcard is mounted at /storage/sdcard1. If you wanna swap them (and make primary your real microsd) just edit "persist.sys.vold.switchexternal=0" to "persist.sys.vold.switchexternal=1" in "/system/build.prop" file
Screenshots
Sources
https://github.com/christiantroy/allwinner_a31
Old stuff
2013-07-12
* Spark: integrated fix for the zoom issue
* Some changes under the hood
* Added ExFat support
* Updated upstream sources
ROM (md5sum)
2013-07-03
* WARNING: before flashing this build you HAVE to flash stock SDK 3.2 using Phoenix Suit and answering "yes" to the format prompt, after that install the new TWRP for SDK 3.2 and proceed. You can do a nandroid backup before flashing with phoenix suit and copy the whole "TWRP" folder from the internal memory to your microsd (or to your PC) if you don't wanna reinstall everything again. In this case restore the backup and after that flash the new zip. If you get any weird trouble do a full wipe.
* Updated proprietary blobs to SDK 3.2
* Updated upstream sources
ROM (md5sum)
2013-06-29
* Fixed 3 dot button not working properly
* Fixed vibrator
* Spark: remapped "back" HW button to "home" so now it can be customized from CM's settings
* Updated upstream sources
ROM (md5sum)
2013-06-22
* Improved video playback compatibility: now MX Player in HW+ mode will play every movie that don't have DTS audio tracks.
* Enabled WebGL
* Some minor changes under the hood
* Updated upstream sources
ROM (md5sum)
2013-06-16
* Fixed Spark's touchscreen issues (thanks MadNBG)
* Potential improvement in stock browser's smoothness
* Updated upstream sources
ROM (md5sum)
2013-06-10
* First build but ready for being a daily driver.
ROM 2013-06-10 (md5sum)
Hi!
U are awesome!
I have a Allview alldro 3 speed quad (http://allview.ro/shop/tablete-si-tv-box/alldro-3-speed-quad.html) after the last official update with 4.2.2, it is very similar with Onda V972, someones who have this tablet tried to install the official Onda firmware with success, someones say the camera work, someones say not working, but the wifi not work for all..
(I fount in this post (http://forum.xda-developers.com/showpost.php?p=42058719&postcount=1108) hi has maybe samsung swl-n20 wireless... )
It is possible to port the CyanogenMod from Onda V972 to this tablet, with wifi driver modification to work with him? Can u help me? (if I can help U, i help with pleasure, i'm programmer, with knowledge in Android)
I have the official firmware file, i downloaded it because the tablet come from the factory with 4.1 It is a very successfull and best selled model, with good price, but with a very lazy lagging firmware.. i don't feel it quad core, my samsung galaxy s i9000 with cyanogenmod is more fast sometimes, without lags...
My tablet is with stock, and not rooted, and I have only the default loader, because i dont find a rooting, or a CWM install tutorial...
Thank U!
update:
Allview released a new 3.2.1.4 firmware (i think it is a clone of Onda 3.2.1 firmware) this is a very good, fast, lagfree update More fast than previous 3.0 version.
I successfully rooted with Root_Onda_4.2.2_V3.2_LZ.zip and i think, with the CWM or TWRP for Onda will works fine. (i think this is the clone for 972 V1)
Only the compatibility with Cyanogenmod port for Onda is the big question....
I found why this tablet has different wireless module, because the 972 had no bluetooth, and the Allview has working Bluetooth....
RobiGo said:
Hi!
U are awesome!
I have a Allview alldro 3 speed quad (http://allview.ro/shop/tablete-si-tv-box/alldro-3-speed-quad.html) after the last official update with 4.2.2, it is very similar with Onda V972, someones who have this tablet tried to install the official Onda firmware with success, someones say the camera work, someones say not working, but the wifi not work for all..
(I fount in this post (http://forum.xda-developers.com/showpost.php?p=42058719&postcount=1108) hi has maybe samsung swl-n20 wireless... )
It is possible to port the CyanogenMod from Onda V972 to this tablet, with wifi driver modification to work with him? Can u help me? (if I can help U, i help with pleasure, i'm programmer, with knowledge in Android)
I have the official firmware file, i downloaded it because the tablet come from the factory with 4.1 It is a very successfull and best selled model, with good price, but with a very lazy lagging firmware.. i don't feel it quad core, my samsung galaxy s i9000 with cyanogenmod is more fast sometimes, without lags...
My tablet is with stock, and not rooted, and I have only the default loader, because i dont find a rooting, or a CWM install tutorial...
Thank U!
update:
Allview released a new 3.2.1.4 firmware (i think it is a clone of Onda 3.2.1 firmware) this is a very good, fast, lagfree update More fast than previous 3.0 version.
I successfully rooted with Root_Onda_4.2.2_V3.2_LZ.zip and i think, with the CWM or TWRP for Onda will works fine. (i think this is the clone for 972 V1)
Only the compatibility with Cyanogenmod port for Onda is the big question....
I found why this tablet has different wireless module, because the 972 had no bluetooth, and the Allview has working Bluetooth....
Click to expand...
Click to collapse
Hi mate was wondering if this is compatible with a nova 10.1 v2 the manufacturers rom is absolute mince and i love CM roms. I know its not listed in the compat zips. The only place i can find any kind of rom is Dorkf*les and that looks a bit of a con for a website.
desmondo1 said:
Hi mate was wondering if this is compatible with a nova 10.1 v2 the manufacturers rom is absolute mince and i love CM roms. I know its not listed in the compat zips. The only place i can find any kind of rom is Dorkf*les and that looks a bit of a con for a website.
Click to expand...
Click to collapse
We can test it.. can u give some links for me?
Nova 10.1 v2
RobiGo said:
We can test it.. can u give some links for me?
Click to expand...
Click to collapse
Hi mate here is a link to the firmware h**p://d-h.st/wXo[/url]
It a nova 10.1 a31 and its version 2 not version 1. Pretty scant any info online for it, any help getting something for this other than stock rom would be mightily appreciated.
Hey folks, does anyone try and compared this ROM with the one that comes with the tablet? Does it make any improvements in terms of performance? Since the original one is very very slow.
Sent from my GT-N7100 using XDA Premium 4 mobile app
---------- Post added at 12:28 AM ---------- Previous post was at 12:27 AM ----------
And how's the battery reading?
Sent from my GT-N7100 using XDA Premium 4 mobile app
Ciao Christian troy
I'm surfing the internet in search of a good ROM for my A31 tablet: Hamlet Zelig Pad 410 more info here:http://www.hamletcom.com/products/xzpad410.aspx
It's running Android 4.1.1 right now
I think the work you've made for this SOC is amazing and I really want to try it out but I don't know what stock SDK 3.2 means and how to check it on my tablet...
thanks
desmondo1 said:
Hi mate here is a link to the firmware h**p://d-h.st/wXo[/url]
It a nova 10.1 a31 and its version 2 not version 1. Pretty scant any info online for it, any help getting something for this other than stock rom would be mightily appreciated.
Click to expand...
Click to collapse
Hi i take its not compatible?
Does wifi adhoc work?
Google voice control force close. Please fix. Thanks.
Maybe is the SDK problem but the camera is kind of weird.
Hi Christian or anyone could help with this momo20 compatibility.zip that you have attached in pg 1 of this section?
I just realized that actually this zip works except that it is unsigned.
I 'll need anyone who has signed it & put it in a link for download...
I tried signing it with the software but it keeps giving me issue on my windows...
Appreciate someone who could signed it or post the signed momo20 compatibility.zip...
Ployer MOMO20 (v2.0 based) 2.0_rc0 which can be found here
https://mega.co.nz/#...NICQ8xfN3QoeYxU
Appreciate with thanks!
is there a twrp version for agptek tp714aq so i can install this lovely rom
Christian Troy said:
If you appreciate my work and would like to support me with a small donation you can click on
button.
If every happy user of this rom would just donate something I could invest more time in all these Android projects.
Click to expand...
Click to collapse
Hello Christian! Is this your github account? I implemented your ubifs solution for mtk phones, and I want to add your xda account in credits instead of github, but I didn't found a link between those two. I don't have a phone with ubifs partitions, but there are many mtk models, and maybe some users will want to donate to you. To be honest I don't have great expectations, because I receive something like 1 euro on a month, and I made first touch recovery for MTK phones, which is used by a lot of people, but I understand that these people who buy MTK phones don't have much money, so I'm OK with it. Still, if you are the same person, tell me and I will add this user link for mtk ubifs users.
Best regards!
Later edit: Ok, sorry for this, I found your link to github under screenshots, and it is clear that you are the same person from github account I mentioned. So, thank you for your great work.
Hello,
I wanted to ask if it would be possible to port / use it on the melee a1000g tv box?
CM11
Any hope for CM11 update?
Onda tablets with A31 chipset has got the 4.4 update....
http://pan.baidu.com/share/home?uk=389436537#category/type=6
Hi,
Could you please post or send me the 3.2.1.4 firmware for Allview alldro 3 speed quad?
I looked everywhere on the internet for it.
Thank you very much!
Looks like I have this ROM on recently bought Archos 97 Platinum HD.
edit. sorry it is for CM 10.2
- important issue - battery sometimes gets to 0% and tablet turns off. Reboot needed then.
I have some issues with Google Play app, some timeouts, stucks.
I have unistalled updates, deleted cache/data Google Play, and GP services, and then readed account in case of RH1 server connection error.
And there were also some shortcomings in smoothness of the menu which I knew before from Cortex A9 Quad Core device.
Then just to finish work with costumizing whole tablet, after installing 20+ aps, I went to recovery (hold two buttons when device is off) and then adv wipe->clean dalvik and clean cache. Then it will optimize all aps again. I think it helps in such a situations.
System in overall works rather good, maybe not so responsively as with my previous experience with Cortex A9, slower, but allright. Just I see that how apps was launching faster before, it's worse CPU, but still not so bad. But as I mentioned, I liked that responsively/instant lanuching.
Then I wen to safe mode by long hold reboot. After getting back to normal mode, there is a smoothness of 2D UI again. It is probably connected with these steps described in TPWRC. Now tablet runs fine.
Antutu score is 15169, when stock rom was sth like 11k, but I'm not sure.
Camera, wifi works.
Stock browser doesn't work. Others works fine.
Now I'll trying to install CM11 from Christian Troy's (author) signature (below his posts) - for Allwinner A31.
http://www.slatedroid.com/topic/978...inner-a31-by-christiantroy-update-2014-04-19/
Or maybe not, cos HDMI dooesn't work there, and this one neither:
http://www.slatedroid.com/topic/102...inner-a31-by-christiantroy-update-2014-04-19/
I'm curious whether Onda 972 4.4.2 ROM ( I heard it's V1 ROM ables to run without camera issues, V1 corresponds with this Archos specification) will run better than this CM10, and maybe without issues from his CM11.
edit. Looks like not:
http://www.arctablet.com/blog/forum/?search=1&new=1&forum=onda-v972&value=hdmi&type=1&include=1
but for sound issues are some solutions
not for 1080p issues.
Altough I found this:
http://www.arctablet.com/blog/forum...tom-firmware-v3-2-1-2013-07-26/page-2/#p29985
but i don't know with exactly which problem with HDMI it corresponds to.
Maybe for absolutely no signal of adapter, not FHD support. i don't know
or this one somebody gave http://www.arctablet.com/blog/forum/onda-v812/hdmi-cable-issues-v813/
onda v972 v1 for Archos 97 Platinum HD Android Kitkat 4.4.2 ROM s
V1 it's the same device, we can flash every rom
http://www.arctablet.com/blog/forum...-bean-root-custom-firmware-v3-3-1-2013-11-22/
I prefer this 4.4.2 - HDMI may work properly, newer SDK based.
http://www.arctablet.com/blog/forum...oted-final-release-28-12-2013/page-7/#p37333]
http://www.arctablet.com/blog/forum...oted-final-release-28-12-2013/page-12/#p41991
http://www.arctablet.com/blog/forum/?search=1&new=1&forum=onda-v972&value=platinum&type=1&include=1
Remember, no mandatory format needed, or checking any options in Phoenix needed.
I didn't do anything with that 10.2 before just flashing in Phoenix. Though I had this custom recovery etc.
Turn off Wifi optimization in options to avoid lags of connection during downloading e.g. in Store.
Anyway, thank you very much for a nice work, Christian Troy!
What tablet have I got?
Hello everyone,
I wanted to install cyanogenmod. I figured out that I don't know which company it is and the model number is not known by google.
I hope someone can help me. Which ROM do I need?
Here are all informations from my tablet:
Model Number: T9701H_2M
Android Version: 4.1.1
Baseband Version: 1.31_20130204
Kernel Version: 3.3.0 [email protected]) ) #8 SMP PREEMPT Mon Feb 4 17:34:05 CST 2013
Build Number: T9701V1-D1-H2-H02.20130204

Categories

Resources