Database Info

[HELP!] Wtf is going wrong here :(

Okay, I'm getting saddened by my continuous fails in ROM porting... I had it down before, but now it seems that nothing is going right.. after wiping /system, and using the wipe data and cache option from the main menu in Clockwork, and flashed to test. here's what happened in recovery.
http://pastebin.com/0gyXJACG
it looka all sucessful and cool, until this happens (when looked at via logcat in adb )
exec '/system/bin/sh' failed: No such file or directory (2)
Yet, I check there and the file is present, and busybox is in so why could it be happening?

[Q] Accidentally Wiped /system, Can't Flash ROM

I was going to install a superuser.zip file to root my M4 but when I went to wipe the /cache the /system get wiped as well. I can boot into either CWM or TWRP and have full fastboot/adb, but when I try to boot into Android it just brings me back to the bootloader. When I try to install a stock ROM it just says it's flashing it but hangs at a certain point, I even had it run overnight and it still didn't install. When I try to flash a custom ROM suh as Cyanogenmod it either completes the flashing in about 2 seconds or greets me with an error. RUU and FUU don't seem to work. I'm 100% out of ideas now, and I'm open to anything to try.

legofan623 said:
I was going to install a superuser.zip file to root my M4 but when I went to wipe the /cache the /system get wiped as well. I can boot into either CWM or TWRP and have full fastboot/adb, but when I try to boot into Android it just brings me back to the bootloader. When I try to install a stock ROM it just says it's flashing it but hangs at a certain point, I even had it run overnight and it still didn't install. When I try to flash a custom ROM suh as Cyanogenmod it either completes the flashing in about 2 seconds or greets me with an error. RUU and FUU don't seem to work. I'm 100% out of ideas now, and I'm open to anything to try.
Click to expand...
Click to collapse
Andyt95 said:
Download Magio R4
reboot into recovery, type in cmd
Code:
adb devices
adb shell
mount data
exit
adb push /path/to/magioR4.zip /data/
[I](you should reboot here, in which case you'll
need to type[/I] "mount data" [I]again after adb shell,
but it's not really essential and should work anyway)[/I]
adb shell
mount /data /sdcard [I](creates a virtual sdcard)[/I]
flash your ROM in recovery just like you would normally (select .zip from sdcard) and boot up
run rumrunner, it should work, giving you S-OFF which will let you flash absolutely anything. If it doesn't, let me know and I'll come up with a workaround.
Click to expand...
Click to collapse
should work

Andyt95 said:
should work
Click to expand...
Click to collapse
Well first:
~ # ←[6nmount data
mount data
mount: mounting /dev/block/mmcblk0p37 on /data failed: Device or resource busy
But instead I just used a USB OTG and flash drive so no big deal
And then Magio popped up with its installer and I went through that and then hit "reboot" to be greeted with the bootloader, so I hit "reboot" in the bootloader, but it still brings me back to the bootloader immediately after a black screen, so I thought "Oops, needed to flash the boot.img", so boot.img was then flashed. Now the green HTC logo is sitting there and isn't doing anything, probably frozen.

Code:
mount: mounting /dev/block/mmcblk0p37 on /data failed: Device or resource busy
means /data is already mounted

I actually got it up and running from a nandroid restore, I tried it once before but the restore didnt finish so I thought it wouldnt work. Thanks for helping me out anyway though!

Can't mount /sdcard

Hello Guys,
I am having a serious problem, I can not acces my SDCard with CWM, it keeps saying "Can't mount /sdcard" I really don't know what to do, I installed the Xperience Kernel and now nothing is working.
Adb Sideload is not working too when flashing the stock ROM, it keeps saying: "* failed to write data 'protocol fault (no status)' *"
I really have no idea what to do now.
Thanks
Fliwatt

Fliwatt said:
Hello Guys,
I am having a serious problem, I can not acces my SDCard with CWM, it keeps saying "Can't mount /sdcard" I really don't know what to do, I installed the Xperience Kernel and now nothing is working.
Adb Sideload is not working too when flashing the stock ROM, it keeps saying: "* failed to write data 'protocol fault (no status)' *"
I really have no idea what to do now.
Thanks
Fliwatt
Click to expand...
Click to collapse
Try this -> http://forum.xda-developers.com/showthread.php?t=1011355
Or this -> http://spafdroid.wordpress.com/2014/06/29/adb-sideload-failed-to-write-data-protocol-fault/
Power of google

Thank you, all of these did not work but I fixed it finally by installing a new recovery:
http://forum.xda-developers.com/showthread.php?t=2563599
Not the touch one.

Htc sensation boot went to hell

Hi. This is my first post and I hope I didn't have to post in some other section just for present myself, since I'm doing it now.
Anyway, I tried to flash a new rom since my HTC Sensation (no 4g nor XE) was totally stucked. I even installed the minimum software that I needed, and the result was a phone that could barely make calls.
So I did a backup of all my datas, then proceeded to a factory reset.
After that I followed the procedure on the htcdev website to unlock the bootloader and everything went smooth.
The first problem happened when, following a video explanation of a french guy that didn't say that I needed a wire, I had to improvise with what I could find at a late time in the night, and it was some iron wire insulated with some paper. At first the phone reeboted but not like I needed, and the following tries were totally useless so I used that software called rumrunner that claims to do be able to turn S-OFF without the wire trick.
I don't really know if it worked or not: I have S-OFF but during the process in the cmd there was "WTF: what are you doing" and "process stopped" even if I didn't touch anything.
Anyway, let's assume that I have S-OFF:
I then tried to flash the recovery 4-EXT using a software called like "Sensation_All-In-One_Kit_v3.1". I didn't noticed any significant change, nor the other functions were working properly since everything said "phone not found". So I used cmd and flashed "recovery-clockwork-touch-5.8.0.9-pyramid" and it worked flawlessy.
Then I rooted the phone using the recovery and installing from the sdcard the file "su-2.3.6.3-efgh-signed".
Then I downloaded cm12.1 by ivanich and installed it, but I forgot to do a backup before that and when I turned on the phone, nothing was loading. It was a black screen with the superior bar. The touch was not working, the on/off button the same. So I reopened the recovery, wiped out the data and cache to factory reset, and did again the SU and custom SO install.
Now the phone boots but it's again the factory reset version, not the one that I installed. I see that from all the bloatware still there. Also, its version is wrong. It's android 4.0.3, while there wasn't that version when it was produced.
I need help.
edit: I found out that when I try to install the rom I get only errors saying :
[the first part is missing since I can't scroll up]
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: no such file or directory
unmount of /system failed; no such volume
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/userdata at /data: no such device
unmount of /data failed; no such volume
patching system image unconditionally...
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: no such file or directory
unmount of /system failed; no such volume
script succeded: result was [0.200000]
Install from sdcard complete.
FINAL EDIT:
I searched in many places for help. I found the man in a IRC chat. Seems that I had to change the recovery app and install twrp. Then it worked flawlessy.

Ciome said:
Hi. This is my first post and I hope I didn't have to post in some other section just for present myself, since I'm doing it now.
Anyway, I tried to flash a new rom since my HTC Sensation (no 4g nor XE) was totally stucked. I even installed the minimum software that I needed, and the result was a phone that could barely make calls.
So I did a backup of all my datas, then proceeded to a factory reset.
After that I followed the procedure on the htcdev website to unlock the bootloader and everything went smooth.
The first problem happened when, following a video explanation of a french guy that didn't say that I needed a wire, I had to improvise with what I could find at a late time in the night, and it was some iron wire insulated with some paper. At first the phone reeboted but not like I needed, and the following tries were totally useless so I used that software called rumrunner that claims to do be able to turn S-OFF without the wire trick.
I don't really know if it worked or not: I have S-OFF but during the process in the cmd there was "WTF: what are you doing" and "process stopped" even if I didn't touch anything.
Anyway, let's assume that I have S-OFF:
I then tried to flash the recovery 4-EXT using a software called like "Sensation_All-In-One_Kit_v3.1". I didn't noticed any significant change, nor the other functions were working properly since everything said "phone not found". So I used cmd and flashed "recovery-clockwork-touch-5.8.0.9-pyramid" and it worked flawlessy.
Then I rooted the phone using the recovery and installing from the sdcard the file "su-2.3.6.3-efgh-signed".
Then I downloaded cm12.1 by ivanich and installed it, but I forgot to do a backup before that and when I turned on the phone, nothing was loading. It was a black screen with the superior bar. The touch was not working, the on/off button the same. So I reopened the recovery, wiped out the data and cache to factory reset, and did again the SU and custom SO install.
Now the phone boots but it's again the factory reset version, not the one that I installed. I see that from all the bloatware still there. Also, its version is wrong. It's android 4.0.3, while there wasn't that version when it was produced.
I need help.
edit: I found out that when I try to install the rom I get only errors saying :
[the first part is missing since I can't scroll up]
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: no such file or directory
unmount of /system failed; no such volume
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/userdata at /data: no such device
unmount of /data failed; no such volume
patching system image unconditionally...
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: no such file or directory
unmount of /system failed; no such volume
script succeded: result was [0.200000]
Install from sdcard complete.
FINAL EDIT:
I searched in many places for help. I found the man in a IRC chat. Seems that I had to change the recovery app and install twrp. Then it worked flawlessy.
Click to expand...
Click to collapse
you just had a very old version of recovery
i assume that guy gave you the proper twrp because there is a false one which messes up with emmc after using wipe option

rzr86 said:
you just had a very old version of recovery
i assume that guy gave you the proper twrp because there is a false one which messes up with emmc after using wipe option
Click to expand...
Click to collapse
No he just told me to get the last version for my phone.

Ciome said:
No he just told me to get the last version for my phone.
Click to expand...
Click to collapse
actually i am saying the same thing

adb sideload does not finish

I was following this tutorial wiki.lineageos.org/devices/walleye/install and I am stuck with sideloading Lineage
I run `adb sideload lineage-17.1-20201013-nightly-walleye-signed.zip` while phone shows "Starting ADB sideload feature" then comes "Installing zip file '/sideload/package.zip'" and then I can see the progress bar below moving, but nothing more, no percentage or more textes or whatever. And it does that now for multiple hours.
Before when I tried it, it stopped completely and the progress bar was frozen.
So I guess something is not working here?! I use Lineage from here, 20201013 download.lineageos.org/walleye

I even cannot push the zip to /sdcard
$ adb push lineage-17.1-20201013-nightly-walleye-signed.zip /sdcard
adb: error: failed to copy 'lineage-17.1-20201013-nightly-walleye-signed.zip' to '/sdcard/lineage-17.1-20201013-nightly-walleye-signed.zip': no response: Success
Click to expand...
Click to collapse

Maybe you can use twrp

armuttaqin said:
Maybe you can use twrp
Click to expand...
Click to collapse
In a way Iam using TWRP, like in the tutorial. So I start the adb sideloading within twrp, how else could i use it? So how can I put the zip onto the phone to use twrp install?

and when I did the format data wipe, I got the errors
failed to mount '/system' (invalid argument)
failed to mount '/vendor' (invalid argument)
Click to expand...
Click to collapse

ok I managed to install from OTG usb I again got the error about /vendor, and also "warning no OS installed" before I rebooted, but then I booted into LOS and it seems to work now....

Hi, just wondering if you have any specifics regarding the steps you followed for OTG USB install? I'm new here and I seem to be having a very similar issue with a newer version of the walleye build