Related
Themed to look like Android 3.0 Honeycomb
This will work on BravoX Rom and stock Bravo 2.2.1 (as tested by abhi897)
I have only tested it on BravoX RC2 so I can't guarantee any results, anything you do to damage your phone is not my responsibility.
This modifies all of the framework-res.apk and services.jar
What it changes:
Status Bar & icons
Statusbar pulldown
Popup menus
Buttons
Drop down menus
"loading" spinners
Lockscreen clock font
Lockscreen pull-bars
Scroll bar and handle
Check marks
Progress bar colors
and other things i can't remember
Requirements:
Root
BandroidX's bootstrap recovery and/or have ADB set up with knowledge
some knowledge on what you need to do if something goes wrong with your phone (e.g. SBF, nandroid restore)
To apply:
(With bootstrap recovery)
Download the flashable zip below to sdcard
Boot into CWM recovery through BandroidX's recovery app
MAKE A NANDROID BACKUP
Select install zip from sdcard
Select choose zip from sdcard
Select BravoComb_BravoX_v1.0.zip
select yes to confirm
wait for installation to finish (a few seconds)
Reboot (will take a while because of the modded services.jar, so BE PATIENT!) Pull Battery and boot up again if boot takes longer than 5 minutes
Enjoy your theme!
Things needed in upcoming updates:
Change some white font to black for easier reading (such as pull down menus)
Make some orange things more honeycomb-like
Let me know if there is anything else!
Changelog:
Initial release
Thanks to:
BandroidX for the awesome ROM and bootstrap
Daneshm90 for the .zip creator http://forum.xda-developers.com/showthread.php?t=717437
The developers for HoneyBread because I used some of their .pngs
EXTRA- if you want Gingerbread Market notifications and Gmail notifications follow these steps:
Note: you don't need my status bar mod, it will work on any phone (I think).
Download Gingerbread_icons_market_and_gmail.zip from below
put on sdcard
uninstall market and gmail
rename the vending.apk and gmail.apk (located in system/app/) to vending.bak and gmail.bak
boot into CWM recovery
Wipe Cache
Select install from zip from sdcard
select choose zip from sdcard
select gingerbread_icons_market_and_gmail.zip
install
Screenshots:
Hope you guys enjoy, let me know what you think about it and what i need to change
Thanks!
Tested it. Works on stock rom as well.
you keep 'em coming! nice, man!
Nice! this looks super good... ill have to try it out next time i flash bravoX
Downloading and installing now. I'll leave my thoughts when it's all installed and I check it out. Keep them coming, man. Great job so far. This looks good.
Just ran through a bunch of stuff and it looks great. There is one thing I would suggest: when switching between tabs in the dialer and manage applications screens you can't really read what the tab is. Other than that, works flawlessly and looks great.
EDIT: Another thing I noticed was that when you're in the text message screen and typing in someone's name, you only see the "type" of number and not their name.
After about a day of using this everything else works great and smooth. I actually think this one runs a little smoother/faster than some other ones. I don't seem to be using as much RAM with this installed.
Sent from my MB520 using XDA Premium App
looks nice
Nice Theme
Notice:
This thread is for general questions regarding Infused v2.
READ CAREFULLY - NEED TO KNOW INFORMATION:
1) Infused v2 is not currently available through ROM Manager. Please be patient.
2) Do NOT restore system data with Titanium Backup. Do NOT restore ALL apps with data. If you absolutely must restore something with Titanium Backup, only restore MISSING apps with data.
Tips and answers to common questions:
1) Animations are disabled by default. Enable them by going to Settings > Display > Animation and selecting "All Animations". If you don't do this, you won't see the CRT screen off animation!
2) If your GPS isn't locking, try this: Go to the phone app and dial *#*#3214789650#*#*. The Angry GPS configuration app will open. Clear GPS data and back out. It may help to reboot after doing that as well.
3) If the power widget isn't working and shows no icons, simply toggling something like GPS in the notification pulldown will fix it. This doesn't seem to be something I caused, but rather a bug in the Rogers shipping ROM. I believe a lot of Galaxy S Gingerbread builds have this problem as well, so it's a Samsung trademark.
Known ROM issues:
-No HDMI support. It was not present in the Rogers base ROM.
-The default lockscreen is a bit laggy. Again, the Rogers base ROM shipped this way. Use the AOSP lockscreen addon or WidgetLocker if you can't stand it.
-HSPA+ may not work properly in all areas.
ROM Manager Installation Instructions:
1) You must be rooted.
2) If you have a /Voodoo folder on your internal SD card, delete it and reboot.
3) If you're already running a custom ROM with Voodoo lagfix FULLY enabled, you can skip to step 7.
4) Download CWM-community-kernel-v8.zip if you're on Froyo or CWM-infused-v2.0.1-kernel.zip if you're on Gingerbread and place it on your internal SD card.
5) Install SGS Kernel Flasher from the Market.
6) Open SGS Kernel Flasher, select choose kernel, select the file you downloaded, and select flash kernel. Your phone will reboot and begin to enable Voodoo lagfix. Let it do that and boot all the way up. It will take a while (5-10 minutes) because it's converting all partitions to ext4.
7) If you're on Froyo, you must now install a file explorer like Root Explorer from the Market and use it to delete the file /system/bin/recovery. You will need to hit the "Mount R/W" button in Root Explorer before it will let you delete it. I can't stress this enough... you MUST MUST MUST delete that file before continuing or else you will get boot loops!
8) Now install ROM Manager from the Market and open it.
9) Select "Flash ClockworkMod Recovery" and choose "Galaxy S i9000".
10) Now go to "Download ROM", select my section (gtg465x), select the latest Infused V2 release, and hit the download button.
11) At the "Installation Type" prompt, select full.
12) Select the addons you wish to install and then wait for ROM Manager to download the ROM. There is a note at the bottom of this post about which addons are not compatible with each other.
13) When you get to the "ROM Pre-Installation" prompt, you MUST check "Wipe Data and Cache" unless you're coming from Infused V2 BETA 1.
14) Press OK. Your phone will reboot and automatically install the ROM. Just sit back and relax.
15) Do NOT restore system data with Titanium Backup. Do NOT restore ALL apps with data. If you absolutely must restore something with Titanium Backup, only restore MISSING apps with data.
CWM Installation Instructions:
1) You must be rooted.
2) If you have a /Voodoo folder on your internal SD card, delete it and reboot.
3) If you're already running a custom ROM with Voodoo lagfix FULLY enabled, you can skip to step 7.
4) Download CWM-community-kernel-v8.zip if you're on Froyo or CWM-infused-v2.0.1-kernel.zip if you're on Gingerbread and place it on your internal SD card.
5) Install SGS Kernel Flasher from the Market.
6) Open SGS Kernel Flasher, select choose kernel, select the file you downloaded, and select flash kernel. Your phone will reboot and begin to enable Voodoo lagfix. Let it do that and boot all the way up. It will take a while (5-10 minutes) because it's converting all partitions to ext4.
7) Download update-infused-v2.X.X-full.zip and place it on your internal SD card.
8) Power off your phone.
9) With the phone powered off, hold both volume keys and the power button for about 10 seconds and then release. This should boot you into RED CWM.
10) Select "install zip from sdcard" and select update-infused-v2.X.X-full.zip.
11) Once that finishes, select "wipe data/factory reset".
12) Select "reboot system now".
13) Do NOT restore system data with Titanium Backup. Do NOT restore ALL apps with data. If you absolutely must restore something with Titanium Backup, only restore MISSING apps with data.
Installing addons:
1) Install ROM Manager from the Market and open it.
2) Select "Flash ClockworkMod Recovery" and choose "Galaxy S i9000".
3) Now go to "Download ROM", select my section (gtg465x), select the latest Infused V2 release, and hit the download button.
4) At the "Installation Type" prompt, select "Addons only".
5) Select the addons you wish to install and then wait for ROM Manager to download them. There is a note at the bottom of this post about which addons are not compatible with each other.
6) When you get to the "ROM Pre-Installation" prompt, you can uncheck "Wipe Dalvik Cache" and press OK.
7) Your phone will reboot and automatically install the addons. Just sit back and relax.
Note about addons: The only overscroll addon that is compatible with "Disable CM7 style battery w/ percent" is "Change overscroll from bounce to glow (AOSP yellow)", and for that to work you need to flash "Change overscroll from bounce to glow (AOSP yellow)" first. "Change overscroll from bounce to glow (Samsung blue)" and "Disable all overscroll effects" will not work with "Disable CM7 style battery w/ percent".
3e recovery
in your infused v1 there is step for modded 3e recovery which i believe is pre-requisite before getting CWM so with v2 whether modded 3e recovery is required,right?
rohit3192 said:
in your infused v1 there is step for modded 3e recovery which i believe is pre-requisite before getting CWM so with v2 whether modded 3e recovery is required,right?
Click to expand...
Click to collapse
No, if you follow the CWM installation instructions then modified 3e recovery is not required. Flashing a kernel that includes CWM in steps 4 through 6 bypasses the need to install modified 3e recovery.
Love the Rom---HSPA????
ok am on 2.0.3 - Good look.
running GB kernel 1.0
everything is stable and fine now for almost a week.
Data speeds are great either way BUT......
only question i have is concerning HSPA i read the fix for it. but even after another install and the fix again it still does not show up. i have a Cappy as well running Miui 1.8.5 with the Glitch Kernel and it gets HSPA no prob all the time. so i dont think its the area.
any ideas. again i get a consistent 3.5-4 mbps either way, im just curious
Is your links back up in rom manager?
*Edit*Ignore this question.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
the2rrell said:
ok am on 2.0.3 - Good look.
running GB kernel 1.0
everything is stable and fine now for almost a week.
Data speeds are great either way BUT......
only question i have is concerning HSPA i read the fix for it. but even after another install and the fix again it still does not show up. i have a Cappy as well running Miui 1.8.5 with the Glitch Kernel and it gets HSPA no prob all the time. so i dont think its the area.
any ideas. again i get a consistent 3.5-4 mbps either way, im just curious
Click to expand...
Click to collapse
The mobile network type listed in Settings > About phone > Status is next to useless. There was a bug in our stock Froyo ROM that caused it to show UMTS there when you were actually on HSPA+. For Gingerbread, we have no clue what it should or shouldn't be displaying there.
gtg465x said:
The mobile network type listed in Settings > About phone > Status is next to useless. There was a bug in our stock Froyo ROM that caused it to show UMTS there when you were actually on HSPA+. For Gingerbread, we have no clue what it should or shouldn't be displaying there.
Click to expand...
Click to collapse
gotcha.........
will be switching to 2.0.4 tonight to see whats good with that version.
the2rrell said:
gotcha.........
will be switching to 2.0.4 tonight to see whats good with that version.
Click to expand...
Click to collapse
Just an FYI... v2.0.4 may be no better than v2.0.1. In fact, if it doesn't fix HSPA+, it could actually be worse if battery life degrades as well. There have been no real improvements since v2.0.1... just attempts to fix HSPA+. If you're happy with your network speeds on v2.0.1, I recommend staying there for now.
n00b alert!!!
how do i add the add-ons through CWM since the links are down on rom manager? thx
gtg465x said:
The mobile network type listed in Settings > About phone > Status is next to useless. There was a bug in our stock Froyo ROM that caused it to show UMTS there when you were actually on HSPA+. For Gingerbread, we have no clue what it should or shouldn't be displaying there.
Click to expand...
Click to collapse
good to know. oddly enough...mine did not change to umts until flashing 2.0.4
xtreemlabs test results also previously showed connection type as EDGE on previous builds...but as of 2.0.4 it has changed to 3g.
currently trying to find a network widget that is at least somewhat accurate in reporting the connection type.
Hey gtg, when ever I use the infused rom, my battery life always takes a nose dive. Its not that great on stock either. You think its my phone battery or something with the rom? If it is any fixes? I love using the rom, just the battery drain kills me every time.
addons and cwm
Can the addons be installed using red cwm? Since the zips can be downloaded from the infused devel thread...and in the past I've used rom mgr seems like it just uses cwm anyway...
I can't get a list of addons (assuming there is one, that is) when clicking gtg in rom mgr. Seems like I read gtg took down the rom list so that may explain the error I get when using rom mgr. Tia.
--
jbaskew
Hey Gtg, I'm running 2.0.0 currently and I'd like to upgrade to 2.0.1, but
I can only find the full version. Do you have a link to the smaller, upgrade version anywhere?
Stickied.
ok loaded up 2.0.4 and have tested the network speeds, they maybe a lil more consistant. i was looking as
3.9 - 1.8
4.6 - 1.2
4.3 - .8
5.6 - 1.6
3.6 - 1.0
on the new rom with speedtest.net.
can say that those results where better or at least more consistent than when i was on 2.0.3.
swimdude1120 said:
Hey gtg, when ever I use the infused rom, my battery life always takes a nose dive. Its not that great on stock either. You think its my phone battery or something with the rom? If it is any fixes? I love using the rom, just the battery drain kills me every time.
Click to expand...
Click to collapse
1) Sometimes GB will go nuts on your battery, try rebooting.
2) If this doesn't fix it, try seeing if disabling wifi changes things. Some people have experienced a weird issue where wifi being on kills the battery. Unfortunately it doesn't affect everyone, and so far doesn't seem to have affected any devs which makes it a pain to debug.
Would it be possible to get working version of Buddies NOw for this ROM?
Just wondering if I'm going from infused froyo to gb if I have to redo cwm and root and rom manager or just do I from cwm and just flash and then just get rom manager and I'm sure the rom is rooted already so that will be fine. Just want to make sure what needs to be done. If some one can let me know I'd appreciate it. Thank you in advance...
snoopdaclown said:
Just wondering if I'm going from infused froyo to gb if I have to redo cwm and root and rom manager or just do I from cwm and just flash and then just get rom manager and I'm sure the rom is rooted already so that will be fine. Just want to make sure what needs to be done. If some one can let me know I'd appreciate it. Thank you in advance...
Click to expand...
Click to collapse
Just use the instructions in the first post. No need to root again.
crupp said:
Would it be possible to get working version of Buddies NOw for this ROM?
Click to expand...
Click to collapse
I'll post it up later.
CM 10 baseband fix:
GSM is completely working
Buttery Smooth
Easy Installation
Download link in the attached text file
Installation
(1)Flash the boot image from the zip
(2)Go to recovery first blue LED is for TWR after a while green LED is for CWM choose any one
(3)Go to mounts and storage , in TWR mount
(4)Mount system,data,cache
(5)Format system,data,cache in TWR wipe-advanced wipe select system,data,cache and wipe it
(6)Re-mount system,data,cache
(7)Install zip from the location you copied it
(8)Install Gapps and Reboot
For first time it will take a bit time finish the setup and done....................
New Update Released V2
Changelog
Video camera is now working with an 3rd Party app and it will be Integrated Very soon I found the app searching Google Playstore For something and I tried it It worked
Happy New Year
Link for Update In the Updated text File
Mere Updates will be released soon
[email protected] said:
CM 10 baseband fix:
GSM is completely working
Buttery Smooth
Easy Installation
Download link in the attached text file
Installation
(1)Flash the boot image from the zip
(2)Go to recovery first blue LED is for TWR after a while green LED is for CWM choose any one
(3)Go to mounts and storage , in TWR mount
(4)Mount system,data,cache
(5)Format system,data,cache in TWR wipe-advanced wipe select system,data,cache and wipe it
(6)Re-mount system,data,cache
(7)Install zip from the location you copied it
(8)Install Gapps and Reboot
For first time it will take a bit time finish the setup and done....................
Click to expand...
Click to collapse
Hey dude the link doesn't open i dunno why could you plzz mirror it
Bro the link is absolutely fine try to change http:// to https://
I recommend not to flash another kernel as it may result no baseband
does this works and for e dual?
Works fine till now, let's see how long this lasts. CM10's one awesome ROM, though - I liked it a lot before I started getting the GSM bug before. Thanks for this!
Where'd you get the ZIP?
Xperia E ds users I will upload CM10 today but I don't know it works or not ........
CM10 baseband fixed users do not set brightness modes in settings system notification drawer widget buttons other wise it won't open again
[email protected] said:
CM10 baseband fixed users do not set brightness modes in settings system notification drawer widget buttons other wise it won't open again
Click to expand...
Click to collapse
Dude its odexed the cm10 we have is deodexed i dont think it will work with me
Bro I am talking about the CM10 I Uploaded
How did you make gsm working?
Deodexed version is coming very soon
delete
Can you port in for Miro or tell how you make GSM works?
[email protected] said:
Bro I am talking about the CM10 I Uploaded
Click to expand...
Click to collapse
You mean to say this is a standalone rom and not just a fix??
It's a fix
[email protected] said:
It's a fix
Click to expand...
Click to collapse
So that means it will be flashed once i flash the main cm10 rom right?
GSM, once again, mysteriously stopped working. No go, guys.
doperthancoke said:
Does charging stop working as well?
Sent from my C1605 using XDA Free mobile app
Click to expand...
Click to collapse
Yep, stopped.
NSDCars5 said:
Yep, stopped.
Click to expand...
Click to collapse
Strange. I've rebooted a million times, install GLTools (which killed Xboost), some themes and mods, and gsm is still working.
In your case, should wipe system, cache ,dalvik (keep data) and reflash.
Oh, do not install any framework.jar and framework-res mods.
Updated: 03/24/2015
Hi all,
I did this mostly for practice but I thought it might be helpful so I went ahead and posted.
Stock LG D850 20f ROM
[*]Rooted/SuperSu
[*]Most bloat removed
[*]Oversharpening fix
[*]Flashable zip
[*]init.d support*
[*]CarrierIQ Remover*
*Init.d support is implemented in ROM only, not the kernel. CarrierIQ is removed automatically after first boot via an init script. Say thanks to @skeevydude for his help in getting this done. I shouldn't say "help", he pretty much did it!
Installation
Flash the Lollipop modem - see @autoprime 's thread here for modem zip
Flash the ROM zip
Wipe cache and dalvik (and in some cases data) if coming from a different ROM
Download
v3* - https://www.androidfilehost.com/?fid=95916177934548695
[QRCODE]https://www.androidfilehost.com/?fid=95916177934548695[/QRCODE]
*No change at all to the ROM itself since v2, I just realized that I've been forgetting to zero out the free space on the image file before uploading, which saves about 600 MB when zipped. New flashable zip is about 1.1 GB instead of 1.7 GB.
Older versions:
v1 - https://www.androidfilehost.com/?fid=95916177934543883
Apps Removed
/system/app:
Google Books
Google Chrome
Google Cloud Print
Google Drive
Facebook
Hangouts
Google Newsstand
Google Play Games
Google Play Music
Google Play Movies and TV
Google Plus
Twitter
/system/priv-app:
ATT Address Book
ATT Caller Name ID
ATT DriveMode
ATT Games
ATT Locker
ATT Lookout
ATT Mobile Locate
ATT Remote Support
ATT Smart Wifi
ATT Mobile TV
ISIS Wallet
ATT Visual Voicemail
MLT (LG tracker)
/system/vendor/app:
Amazon Kindle
ATT Family Map
ATT Home
ATT Keeper
ATT MHS Launcher
ATT Navigator
Uber
DeviceHelp
myATT
YP Mobile
ATT Apps
In case you want some of the ATT apps back, I have uploaded a zip here with those apps. This is NOT a flashable zip. You have a couple of options:
1. You may be able to install these as a normal (user) app by just pulling out the apk and installing the usual way.
2. If that doesn't work as expected, copy the app folder from the zip into the appropriate system folder as listed in the "Apps Removed" section.
Download: ATT Apps
Xposed Info
cmulk said:
Xposed has a couple of bad side effects at this point, so before doing anything you need to use Titanium or something similar to Freeze (this basically what the "helper" does):
LGSmartCover
Weather
Weather Theme
WeatherPlatform
Then you can install xposed as in the thread here: http://forum.xda-developers.com/showthread.php?t=3034811
However, there is still one more bug to keep in mind: Xposed will crash the Tethering and Networks menu. There is no fix for that yet, but as a workaround you can download some apps from the play store (like Mobile Network Settings), to shortcut around the menu that force closes.
Click to expand...
Click to collapse
Credits
@autoprime - Flashable zips, bump'd boot.img, and very clear instructions in his thread here
@timmytim - uploading the lollipop stock images (although I know a lot of others were working on that too)
@Skin1980 - Oversharpening fix
@skeevydude - init.d support and carrierIQ remover
CarrierIQ Removal
CarrierIQ has now been removed!
The removal is done via an init script that runs at boot to disable the IQ service before removing the files in order to prevent a force close. However, if you have to wipe data/factory reset without re-flashing the ROM, you will get a force close on the first boot. The good news is that I've tested this scenario and it should fix itself if you just wait about 20 seconds. In other words, the mentioned script does it's thing to stop the service to fix the force close and you are good to go after that.
Old info below:
cmulk said:
On the 20f lollipop rom (either mine or stock, there's no difference) either freezing LADDM or removing the libraries and LADDM as you mention will cause a force close unless you disable the "IQService" first, which is built into the framework-res.apk. I have repeated it multiple times and it has been discussed quite a bit in the Lounge and other threads. Disabling the service is easy for users to do with the "DisableService" app, and then you can remove LADDM and the libraries as mentioned. The difficulty is that disabling a service is a user setting, so, for example, if I reflash my ROM without the IQ files onto a phone with clean /data, I will again get the force close and an unusable ROM.
Click to expand...
Click to collapse
Manual Steps
In the meantime, here is how users can manually disable CarrierIQ. I take no credit for this method, it is posted in several places by several people, I'm just putting it here for convenience:
YOU MUST DO THIS IN ORDER (or at least the first few steps)
1. Download the "DisableService" app from the play store
2. In the DisableService app, go to System -> Android System and disable the "IQService" service
3. Use a root explorer to delete the folder /system/app/LADDM
4. Use a root explorer to delete /system/lib/libiq_client.so and /system/lib/libiq_service.so
5. (Optional) Uninstall DisableService
Remember, disabling the service is a user setting, so if you need to wipe /data for some reason, you will need to re-flash the ROM (which has the CarrierIQ files included) or else you will get a constant force close when your phone boots.
I'll give it a try, thanks
Flashing now. Will report.
I will be watching this ROM. Thanks for posting.
Exactly what does " if coming from a different ROM" mean? I'm on 4.4.2 10f Wulf (stock - rooted) ROM
JeffDC said:
I will be watching this ROM. Thanks for posting.
Exactly what does " if coming from a different ROM" mean? I'm on 4.4.2 10f Wulf (stock - rooted) ROM
Click to expand...
Click to collapse
Just clean flash to save yourself a hassle
2SHAYNEZ
Thanks for your work. I wish I had some skill in this realm. It'd be nice to pick and choose which apps you wanted removed. I prefer the stock ATT Visual Voicemail app over the one in the Play Store as its more reliable. I also use some of the Google Apps that are removed here as well. But great job in getting something debloated out there.
Sent from my LG-D850 using Tapatalk
Flashing lollipop Issues
Thanks for your work.... When flashing the 2 lollipop roms, 9 out of 10 times I get just a screen with icons, no wallpaper, no notification pull down no buttons at the bottom. I flash the modem the rom then SU and clear cache. I have only got the other ROM to flash successfully once. The same is going on with this ROM, is this happening to anyone else. I flashed it 5 times with the same results, would anyone know why this is happening, seems others dont have this issue. Thank you again for bringing us a debloated Lollipop rom.
shayneflashindaily said:
Just clean flash to save yourself a hassle
2SHAYNEZ
Click to expand...
Click to collapse
Here is what I understand for a clean flash:
"1. Boot into Recovery
2. Make a Nandroid backup
3. Wipe data/factory reset
4. Wipe cache partition
5. Wipe Dalvik Cache
6. Flash ROM
7. DO NOT REBOOT – STAY IN RECOVERY
8. Select backup and restore
9. Select advanced restore
10. Select the Nandroid backup you made above
11. Select Restore data
12. Select Yes – Restore data
13. WAIT!
14. REBOOT"
What I do not understand is step 8, which selects the backup made in step two... and then flashing the backup over the (new) ROM flash in step 6. Wouldn't that overwrite the new ROM you just flashed?
JeffDC said:
Here is what I understand for a clean flash:
"1. Boot into Recovery
2. Make a Nandroid backup
3. Wipe data/factory reset
4. Wipe cache partition
5. Wipe Dalvik Cache
6. Flash ROM
7. DO NOT REBOOT – STAY IN RECOVERY
8. Select backup and restore
9. Select advanced restore
10. Select the Nandroid backup you made above
11. Select Restore data
12. Select Yes – Restore data
13. WAIT!
14. REBOOT"
What I do not understand is step 8, which selects the backup made in step two... and then flashing the backup over the (new) ROM flash in step 6. Wouldn't that overwrite the new ROM you just flashed?
Click to expand...
Click to collapse
I always do a clean flash.. dont need to back up and restore and still get bad results.
louvass said:
I always do a clean flash.. dont need to back up and restore and still get bad results.
Click to expand...
Click to collapse
That's not encouraging.
louvass said:
Thanks for your work.... When flashing the 2 lollipop roms, 9 out of 10 times I get just a screen with icons, no wallpaper, no notification pull down no buttons at the bottom. I flash the modem the rom then SU and clear cache. I have only got the other ROM to flash successfully once. The same is going on with this ROM, is this happening to anyone else. I flashed it 5 times with the same results, would anyone know why this is happening, seems others dont have this issue. Thank you again for bringing us a debloated Lollipop rom.
Click to expand...
Click to collapse
I have not seen that issue, but in case you are not clearing data you may need to try clearing dalvik cache.
Also, (and this is just a shot in the dark) you could try formatting system before doing anything else just in case something strange is left behind there.
JeffDC said:
That's not encouraging.
Click to expand...
Click to collapse
You can try dirty flashing first without losing any of your data.
1. Back up your current Boot and System
2. Back up your current modem (if you're coming from the Kitkat modem), or just download a flashable KK modem already posted on XDA
3. Flash the modem and ROM in this post
4. Wipe cache and dalvik
5. See if it works
If it's not working, then you will need to restore your boot, system, and modem to go back to your original kitkat setup without losing data.
Otherwise, you'll have to backup with Titanium and do a clean flash (wipe data) as already mentioned. Using Titanium makes clean flashing not so bad
I do clear Wipe cache and dalvik I wipe everything and it boots back into a desktop and thats it no notification, the same thing happened with the first lollipop.. but after 10 flashes it finally took... so I thought Id try your de-bloated and the same thing is happening again, not sure why this is. I can jump back to kk after flashing the modem without issues. Thank you again for your work.
Pdj7969 said:
Thanks for your work. I wish I had some skill in this realm. It'd be nice to pick and choose which apps you wanted removed. I prefer the stock ATT Visual Voicemail app over the one in the Play Store as its more reliable. I also use some of the Google Apps that are removed here as well. But great job in getting something debloated out there.
Click to expand...
Click to collapse
I agree that I use most or all of these Google apps as well. However, they update so often anyway that I prefer to just have them as user apps (otherwise you end up with 2 copies - the old static version in the system apps folder, and the updated version in the user apps folder).
As for the visual voicemail, I have posted the ATT apps in a zip in the OP. Visual voicemail is in the VVM_ATT folder.
Thanks!
cmulk,
Would you please clarify post 5 and 9 questions?
JeffDC said:
cmulk,
Would you please clarify post 5 and 9 questions?
Click to expand...
Click to collapse
Sure thing! That's actually what I meant to do in post 13. I am not sure if you can flash over 10f without wiping data, but you could give it a try without losing anything (except time) if you look at post 13.
You should clear cache and dalvik mostly any time you are flashing, unless you are just flashing over another stock 20f ROM.
louvass said:
I do clear Wipe cache and dalvik I wipe everything and it boots back into a desktop and thats it no notification, the same thing happened with the first lollipop.. but after 10 flashes it finally took... so I thought Id try your de-bloated and the same thing is happening again, not sure why this is. I can jump back to kk after flashing the modem without issues. Thank you again for your work.
Click to expand...
Click to collapse
Have you tried formatting /system before doing anything else? I'm not sure that will make any difference, but just for process of elimination at least
cmulk said:
Have you tried formatting /system before doing anything else? I'm not sure that will make any difference, but just for process of elimination at least
Click to expand...
Click to collapse
Thanks I do clear everything but my external mem.
Ever since flashing this I'm getting "no sd card" messages every time I try to download anything ( I don't have an external sd card) but it's never been a problem before. I've restored a backup of my stock Tim and the problem followed me after full wipes.
[Q&A][FAQ][SAC23] [S6 EDGE]FAQ, Q&A and User Guide for Sac23_Ram9200_Sprint_Deoxed
This is the first of many guides I will be posting and keeping up with.
It will be utilized for Q&A FAQ and HOW TO so we can keep the development thread for development purposes.
Post your questions and Myself or other knowledgeable users of Sac23 ROMS will answer as quickly as possible.
So ......
TWRP THREAD IS HERE for the most up to date version
THANKS @Soooperstar
Soooperstar said:
Fully working English version .Tar (No theme needed, Odin and done) Credits: @Zi.Droid
I'll leave the Chinese .img file just incase anybody wants to use flashify. Remember to add the TWRP theme in Post #3 to covert to English.
How to Install: TWRP
Unzip the file and it will include a .tar and a .img file. (Chinese Version)
Using odin:
Download and install the drivers
Download Odin
Leave Auto reboot and F. Reset Time checked
Absolutely do not check repartition
Click AP/PDA
Navigate to the recovery.tar
Click Start
Hold down the home and volume up button when it reboots
Rinse and repeat if TWRP does not install
Using Flashify:
Download Flashify from Google
Under the FLASH tab using the Flashify app click Recovery Image.
Find the img file you just downloaded for your specific device.
Click on the img file then you will be prompted with a Flash Recovery? screen.
Click YUP if you would like to continue with the flash or MAYBE NOT... if you chose the wrong file or have changed your mind.
If you chose to continue flashing you will see a working box which says Flashing...
A box which says Flash Completed will show after flash is complete.
Click Reboot Now.
Done!
Happy Flashing!!
Worked fine for me but:
FLASH AT YOUR OWN RISK
Download Links
English Odin .Tar:
https://www.androidfilehost.com/?fid=23991606952599242
Chinese .img (NEED THEME FROM POST #3 TO CONVERT TO ENGLISH):
https://mega.co.nz/#!38pyUCqB!ZhURUjuNepOvcTz-ct3JzcuwQ7ox7jjj7ZCflfHtpuE
Click to expand...
Click to collapse
For starters HOW TO INSTALL a ROM by SAC23
This assumes that you ALREADY have TWRP Recovery installed on your phone and you know how to use it.
Download the ROM of choice...move it onto the EXT SD CARD.
VERY IMPORTANT>>> Move all music, pics, important data from internal storage to the ext SD card and/or to your pc, etc. because during this process, the internal will be completely erased.
Recommended Method to Flash SACS Custom ROMS using TWRP
Boot into TWRP
Select Wipe > Advanced Wipe
Select Dalvik, System, Data, Internal Storage, and Cache. Swipe to Wipe (do this THREE TIMES)
Go back to previous Advanced Wipe screen.
Select Format Data, Type YES, Press GO. (do this THREE TIMES)
Go back to previous Advanced Wipe screen.
Swipe to Factory Reset. (do this THREE TIMES)
Go back to MAIN menu and STOP HERE !!!!! READ NEXT STEP CAREFULLY....
[*]Select REBOOT INTO RECOVERY mode and Swipe to Install Super User. DO NOT REBOOT INTO SYSTEM!
[*]AFTER THE PHONE REBOOTS INTO RECOVERY:
NOW proceed with installing The ROM
Select Install Zip, Drill down to Sac23's Rom you want to flash, and Swipe to install.
Follow on screen instructions (if there are any).
When prompted, REBOOT SYSTEM.
THE FIRST BOOT WILL TAKE A MINIMUM OF 20 MINUTES..... SOME DEVICES EVEN LONGER...
.
.
HAVE PATIENCE
When the Home Screen appears and it is obvious that the install has completed, allow the phone to settle for another 10 minutes BEFORE you begin setting up your personal preferences and accounts.
If everything seems normal, set your phone up and profit.
IF IT WON'T BOOT....try pulling battery and replacing battery then restart phone and you should see "Android Updating"
After setting up your personal info and you are now ready, the first thing you should always do after flashing any ROM is to go to settings, system updates, and refresh/update your PRL & PROFILE then reboot the phone. Second thing is go to settings, more networks, mobile networks, network mode, and select LTE/CDMA.
TIPS
VER 2
OP HOST LINK HERE
Recent apps fix long press on home CLICK HERE
MY MIRROR HOST LINK HERE MD5 3bb8163e902769f564a2f3adb3a1b7e6
Recent apps fix long press on home CLICK HERE MD5 715bb138592d84092d93a5aea63cf7e6
V2 CHANGELOG
CHANGE DEFAULT ANIMATION SCALES
HOT SPOT HACK (might be a little glitchy but it works)
DISABLED EARPHONE SOUND WARNING
FASTER ANIMATION SPEED IN FRAMEWORK
ENABLE CALL & MSG BLOCKING
ENABLED DEVELOPER OPTION DEFAULT
DISABLE SCROLLING CACHE thanks ram9200
ADDED CALL RECORDING
ADDED SHUTTER SOUND TOGGLE IN CAM
ADDED CAMERA DURRING CALLS
ADDED CALL BUTTON TO LOGS
ADDED VN POTATO CLOCK thank u nguyenxuanhoa
ADDED 3MINIT BATTERY MOD updated newest thanks Gharrington
ADDED VN LAUNCHER WITH SETTINGS AND NEW EFFECTS thank u nguyenxuanhoa
PORTED VN SETTINGS WITH SYSTEMUI MODS me and nguyenxuanhoa
FIXED FINGERSCANNER lbxmobbin_1 thanks for heads up
FIXED THEMES STORE thanks carrsteven for links
ADDED VOLUME UP TO SWITCH TRACKS
ADDED SCREEN SHOT TO REBOOT MENU thank ambasadii
ADDED NEW MODDED CAMERA Improved IMAGE & VIDEO Quality; Removed RESTRICTIONS AND ALOT MORE THANKS amk19
ADDED SMART BODING SETTINGS
ENABLED ALOT OF FEATURES IN SETTINGS
ADDED FIND MY MOBILE IN SETTINGS
ADDED APPLICATION PERMISSIONS
ADDED Hybridmax Kernel thanks Hybridmax
ENABLED ALOT OF FEATURES THAT WERE TURNED OFF
ADDED colorfade memory leak fix thank mikeyinid
ADDED NEW BOOT ANIMATION THANKS PAS200J
ADDED DISABLED SMS TO MMS AUTO-CONVERSION WHILE EXCEED 480 WORD thank u Manh_IT
ADDED MESSAGING TIME STAMPS TO ITS ORIGINAL TIME thank u Manh_IT
ADDED SMS SAVE TO SD
ADDED ENABLED ALL SMS SETTINGS thanks jovy23
ADDED MENU KEY BACK
AND MORE I DONT REMEMBER
future use 2
future use 2
future use 3
future use 3
rlmiller said:
future use 3
Click to expand...
Click to collapse
Like your answer for number 2, pull battery? Got a screwdriver [emoji6]
Also should probably get rid of the recovery links
ram9200 said:
Like your answer for number 2, pull battery? Got a screwdriver [emoji6]
Also should probably get rid of the recovery links
Click to expand...
Click to collapse
Lol....sorry...was late for work. ..in a super rush... just copied and pasted from previous post. .. will correct soon.
Thanks @ram9200
Why wipe sdcard? Is it because the rom is deodexed? Cant i just wipe cache, delvak and system?
Edit: flashed without wiping internal storage. All seems good so far.
Is anyone else getting a fc on theme store and shealth?
Snipe4 said:
Is anyone else getting a fc on theme store and shealth?
Click to expand...
Click to collapse
I fixed shealth by deleting it from system/priv-app and reinstalling from samsung app store. No fix for theme store as of yet on deodex
ram9200 said:
I fixed shealth by deleting it from system/priv-app and reinstalling from samsung app store. No fix for theme store as of yet on deodex
Click to expand...
Click to collapse
Would a log help for theme store?
tjeeeeee said:
Would a log help for theme store?
Click to expand...
Click to collapse
Yes!
ram9200 said:
Yes!
Click to expand...
Click to collapse
Ill grab one when i get home then
and here you go @ram9200 https://drive.google.com/file/d/0B1KrqT9hFsfYNGRlTjM3enNBWjg/view?usp=sharing
wifi popup
can anyone help me with this issue,, i a S6 EDGE running on SA23V3 ROM now but i was running the V7, , freaking awsome roms , hats off to the developers im getting this pop up ,i was rooted without a custom rom but couldnt, use my hotspot , these pop-ups are popping up, while im using my hotspot every few minutes, you have to cancel it or hit the return button, help please,,,,,,,,,, { TURNING ON WI-FI WILL DIABLE HOTSPOT }
darrin55 said:
can anyone help me with this issue,, i a S6 EDGE running on SA23V3 ROM now but i was running the V7, , freaking awsome roms , hats off to the developers im getting this pop up ,i was rooted without a custom rom but couldnt, use my hotspot , these pop-ups are popping up, while im using my hotspot every few minutes, you have to cancel it or hit the return button, help please,,,,,,,,,, { TURNING ON WI-FI WILL DIABLE HOTSPOT }
Click to expand...
Click to collapse
I get it to but just cancel or ignore it completely. Atleast Hotspot works
Hey has any of the few people figured out the rotation issue? Mine seems to be ROM related because if I Odin back to stock it works fine. Atleast I know it's not hardware related like some seemed to think.
Black and white home screen
can anybody tell me why my home screen is black and white? I woke up yesterday and it must have happened while it was in my pocket, shortly before I went to sleep. I've looked around in settings and other things, but I can't seem to find the cause. someone to tell me how to get back to normal, it would be appreciated!
lokerman said:
can anybody tell me why my home screen is black and white? I woke up yesterday and it must have happened while it was in my pocket, shortly before I went to sleep. I've looked around in settings and other things, but I can't seem to find the cause. someone to tell me how to get back to normal, it would be appreciated!
Click to expand...
Click to collapse
Looks like safe mode or ultra battery saver mode. Check your settings
lokerman said:
can anybody tell me why my home screen is black and white? I woke up yesterday and it must have happened while it was in my pocket, shortly before I went to sleep. I've looked around in settings and other things, but I can't seem to find the cause. someone to tell me how to get back to normal, it would be appreciated!
Click to expand...
Click to collapse
Long press to edit home screen and click on settings, should be a battery saving option for the launcher in there
Sent from my SM-G925P using Tapatalk
tjeeeeee said:
Long press to edit home screen and click on settings, should be a battery saving option for the launcher in there
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
Thanks that was it! . Power saving mode in the luancher, not the phone. . It waz getting annoying, so thank you. .