Hi everyone firstly i have searched everywhere for info on this subject with no luck and i did not know where to post so i thought i would start here..
(NOTE TO MOD: if this is wrong location for this thread please accept my apologies)
My device is a ZTE MF112 3G Dongle (on three uk)
i have downloaded a firmware for this device but when i try to flash it i get an error nv_status_read_only
so my first question would be how would i get the read/write access to be able to flash??
i then proceeded to download QPST to do some investigating and it turns out that when i use the EFS Explorer with QPST the NV and EFS folders have a red marker and i am still unable to access them??
so my next question will be is it possible to change the status of both partitions using QPST??
Thanks in advance...
Related
Hi guys i have a problem with my IP address when i go to settings>about phone>status my IP address says unavailable ive tried switching my phone off but nothing works i think this is affecting my wifi as well because it also says settings not responding when i switch it on and when i use other applications to switch it on they fail when they are collectiing my wifi address someone please help me i miss WiFi:crying::crying:
Since you didn't post the device information (ie phone model) nor the router you use, it doesn't allow us forums users to give you the best options to troubleshoot the problem your having
Some generic options to try
1) try powercycling the router (linksys have a tendency of dropping Wifi connections)
2) check to see if the wifi toggle is on (the settings menu)
I have the same problem as well:
my phone specs:
Software version: L720VPUEMK2
Device model: SPH-L720
Android version: 4.4.2
A couple of days ago i had installed the newest update for the s4 and when it had finished installing both the bluetooth address and the ip address said unavailable and i am now unable to connect to any internet
colestole said:
I have the same problem as well:
my phone specs:
Software version: L720VPUEMK2
Device model: SPH-L720
Android version: 4.4.2
A couple of days ago i had installed the newest update for the s4 and when it had finished installing both the bluetooth address and the ip address said unavailable and i am now unable to connect to any internet
Click to expand...
Click to collapse
It looks like your efs has been missing.If you have a backup.Restore it.
Flash the modem separately may help too.
cshlcsh said:
It looks like your efs has been missing.If you have a backup.Restore it.
Flash the modem separately may help too.
Click to expand...
Click to collapse
Hi,
I am also facing this same problem (Bluetooth & IP address unavailable) since 2 days back and i tried to switch off & on my Samsung S4 (I-9500 GT).
The thing is that i have never manually backed up my phone or this EFS, so advice me a solution to overcome this problem.
Vignesh Viswanathan said:
Hi,
I am also facing this same problem (Bluetooth & IP address unavailable) since 2 days back and i tried to switch off & on my Samsung S4 (I-9500 GT).
The thing is that i have never manually backed up my phone or this EFS, so advice me a solution to overcome this problem.
Click to expand...
Click to collapse
Hi,
I am also facing this same problem (Bluetooth & IP address unavailable) since 2 days back and i tried to switch off & on my Samsung S4 (I-9500 GT).
The thing is that i have never manually backed up my phone or this EFS, so advice me a solution to overcome this problem.
Awaiting for an response on the issue mentioned above, advise me what is the solution...
Looking forward to the precious help from you guys
Vignesh Viswanathan said:
Hi,
I am also facing this same problem (Bluetooth & IP address unavailable) since 2 days back and i tried to switch off & on my Samsung S4 (I-9500 GT).
The thing is that i have never manually backed up my phone or this EFS, so advice me a solution to overcome this problem.
Awaiting for an response on the issue mentioned above, advise me what is the solution...
Looking forward to the precious help from you guys
Click to expand...
Click to collapse
if you r having problem with efs file then try this.
1> you need to root your phone first. check out forums there are tons of tut's available.
2> goto this post and download efs professional zip.(you have to extract it)
3> enable usb debugging in developers mode and make sure you have all the usb/adb drivers installed on your phone.(install universal adb drivers that will work fine)
4> open efs professional.exe and connect your device.
5> now go to backups tab and select your device under device filter tab and then click backup. wait for backup to be complete.
6> now go to restore tab and under backup archives select one of the .tar.gz file I prefer (device)(although it doesn't matter) and hit resotre.
7> your device will reboot and you are done.
if you still have the problem
download root explorer and goto efs folder in root directory. then find this file - 'nv_data.bin.md5' and delete it and restart the phone.
if this helped then hit the thanks.
I felt this problem with my htc desire 826..
Can not share hot spot to others ..
Hi Sir,
I've also face same problem, my Bluetooth and IPv4 address is unavailable.
How can i make them available. I need your help sir. Thank you phone model SM-G530H
any fix for this issue on Moto g4 xt1625, No Mac Address no way to connect to Data connection or even the wifi.
TubbyStubby said:
if you r having problem with efs file then try this.
1> you need to root your phone first. check out forums there are tons of tut's available.
2> goto this post and download efs professional zip.(you have to extract it)
3> enable usb debugging in developers mode and make sure you have all the usb/adb drivers installed on your phone.(install universal adb drivers that will work fine)
4> open efs professional.exe and connect your device.
5> now go to backups tab and select your device under device filter tab and then click backup. wait for backup to be complete.
6> now go to restore tab and under backup archives select one of the .tar.gz file I prefer (device)(although it doesn't matter) and hit resotre.
7> your device will reboot and you are done.
if you still have the problem
download root explorer and goto efs folder in root directory. then find this file - 'nv_data.bin.md5' and delete it and restart the phone.
if this helped then hit the thanks.
Click to expand...
Click to collapse
Hi, i have the same problem, do i have to download efs professional zip on my pc?
my phone ivargo isnt showing any signal could i get help
My samsung j7 is not scanning any wifi. I hav already done factory reset also but no change... what can i do?
Mine is SM-J700H
Andeoid version 6.0.1
Pls my IP address and my Bluetooth address are displaying unavailable.someone told me to try going to settings/apps/Google play services/and force stop and restart it.but when I tried,the force stop button is unclear and unpressable.pls indeed u guys help on this.i wud be very grateful if you reply..
Hi ,
After backing up my ZTE V967S imei with mobile uncle i flashed lewa os unfortunately i have lost my imei and baseband and i cant restore the backup , im assuming this is because the efs folder was overwritten and may need to be reformatted, replacing the rom with the stock rom didn't resolve this issue . To compound issue i cant connect to pc at all, i installed all drivers and nothing . So what i think i need is a rom that will repartition the efs from the sd card or some zip file that could rewrite the baseband , any ideas would be helpful.
Kind regards
Jim
jimennis said:
Hi ,
After backing up my ZTE V967S imei with mobile uncle i flashed lewa os unfortunately i have lost my imei and baseband and i cant restore the backup , im assuming this is because the efs folder was overwritten and may need to be reformatted, replacing the rom with the stock rom didn't resolve this issue . To compound issue i cant connect to pc at all, i installed all drivers and nothing . So what i think i need is a rom that will repartition the efs from the sd card or some zip file that could rewrite the baseband , any ideas would be helpful.
Kind regards
Jim
Click to expand...
Click to collapse
I have managed to locate a spfalshtool backup of another V967S but as i said the phone will not connect to PC here is the list of files in the backup ,boot.img,EBR1,EB2,expdb,logo.bin,mbr,misc,mt6589 android scatter emmc.txt,pmt,pro info,protect f,protect s,recovery.img,rom ver2.txt,seccfg,secro.img,system.img,uboot.bin . can the be flased to phone without pc ?
Hope you can help
Hi All , i have manged to resove the issue and will post a tutorial shortly
jimennis said:
I have managed to locate a spfalshtool backup of another V967S but as i said the phone will not connect to PC here is the list of files in the backup ,boot.img,EBR1,EB2,expdb,logo.bin,mbr,misc,mt6589 android scatter emmc.txt,pmt,pro info,protect f,protect s,recovery.img,rom ver2.txt,seccfg,secro.img,system.img,uboot.bin . can the be flased to phone without pc ?
Hope you can help
Hi All , i have manged to resove the issue and will post a tutorial shortly
Click to expand...
Click to collapse
OK , files needed are spflash_tool.exe , full backup and MTK usb Vcom driver .
Take out phone battery and attach to pc , i used win 7 , hold the volume down and power button and phone should appear in device manager as unknown device install the driver manually and phone will show up as MTK Port in device manager , it may disconnect and reconnect but do not worry , unplug the phone ,open spflash_tool and load the scatter file(contact me for full backup files) select all files including the preloader and choose auto format now reconnect the phone with battery in and hold down volume and power button as soon as you hear it connect hit download and it will format and flash the stock rom to the file when done just restart your phone and your imei will be back
Hi All, this is my first post so sorry if etquette or sthg is wrong
I have been able to connect my OPO to my computer and open diagnostic port and see it as a modem (COM11).
I was able to access it with QPST Software Download application to make a backup. ( I can describe how to do it if necessary)
Unfortunately I am Unable to restore QCN file with QPST Software Download application.
It all works OK to the end (100%), until it says resetting, then it says connection lost and it fails.
Any idea what I am doing wrong?
Best Regards,
Ahmet TURAN
Hello,
I received a so called "Lenovo K3" that turned out to be a clone... trying to get rid of some annoying Chinese apps, I used Uninstaller app. I accidentally froze a system app and found out I cannot unfreeze it without purchasing the PRO ver... The thing is ever since that I cannot install any new apps (I get ERROR 110) or even copy it to the system folder....
Another stupid thing I did was to restore it to "Factory Settings" changing nothing of the problem but loosing all of my already installed apps!!!!
I did that after trying to follow a procedure by someone who apparently had same situation, he resolved it by rebooting into recovery using ADB and then copying the "DefaultContainerService.apk" to the System/app folder
I manged to use ADB but once the phone booted into recovery mode, I lost connection (USB) and nothing I did helped.
SO-
I have a Chinese phone not sure if the CPU is MTK 6589 or 6582 , 512MB , 960*540 ( I remember the details from when I had an info app)
I cannot install anything (Error 110)
I cannot connect using ADB while in recovery mode
I cannot copy to System folder (Permissions)
I have no idea which ROM I can use to flash it and I was not able to connect to it when it is OFF (Only when running)
I have no apps on it except some basic apps
I think it is still rooted if Factory reset did not change that
Mmmmmm any ideas???
Thanks!
Is there a way to get system configuration using ADB?
Since no one answers, guess my only way out is to flash.. and since it is a clone with fake specs, I must know exact configuration so I can find a suitable rom, right?
Still waiting desperately....
Hi there,
I'm sorry but I can't find anything related to your question.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
I formatted my tablet as the tablet was misbehaving after downloading the necessary tools and softwares hoping I would get everything alright. But as going through the SN Writer I found out that I am missing the database required for the tablet IMEI write and WIFI and Bluetooth...I searched the whole Internet and forum but its not there, mind you its not the firmware files but MD1_DB and AP_DB files, my tablet is useless without network, wifi and bluetooth. Please help me.