my micromax A87 is totally bricked beAcuse i unknowingly formatted everything in the CWM menu. the mobile does not show any boot logo or goes into recovery mode by pressing volume and power buttons. it is not even getting recognised in my PC and when i connect it to the PC it says "unidentified device" i could not able to install drivers for the device even forcefully..PLEASE HELP ME!!
Hello..
I want to install CWM recovery in my Micromax canvas turbo mini a200..
It has a non-removable battery..So.how can i to connect it to SPflashtools..
If anyone knows how to please help me...
Thanks..
It's easy.
Do all the steps and when you reach the one to connect the phone to the USB cable, connect it, even turned on or in bootloader mode and keep pressing the power button until the phone restart.
And that's it!
Even works if you have bootloop
sent from my DARKMOON to Earth
I tried to downgrade the kitkat version because I couldn't update my apps, using a flash tool.
It then shut down and now does not turn on at all. When I plug into the computer the USB gets into a cycle/loop of connect and disconnect. Please help me if you have the time.
lenover9000 said:
I tried to downgrade the kitkat version because I couldn't update my apps, using a flash tool.
It then shut down and now does not turn on at all. When I plug into the computer the USB gets into a cycle/loop of connect and disconnect. Please help me if you have the time.
Click to expand...
Click to collapse
Does it vibrates or display anything?
Tyaginator said:
Does it vibrates or display anything?
Click to expand...
Click to collapse
no. But I think it goes on '''META MODE'" ONLY on the computer for a few seconds.
Thanks for commenting.
Check device manager in your pc when you connect your phone, is it showing MTK 65xx preloader
Tyaginator said:
Check device manager in your pc when you connect your phone, is it showing MTK 65xx preloader
Click to expand...
Click to collapse
It shows Mediatek preloader usb vcom port (com7) alternating with mtk usb port (com6).
lenover9000 said:
It shows Mediatek preloader usb vcom port (com7) alternating with mtk usb port (com6).
Click to expand...
Click to collapse
U must have flashed some other device's firmware and which guide u have followed
Tyaginator said:
U must have flashed some other device's firmware and which guide u have followed
Click to expand...
Click to collapse
I used this one.
forums (dot) lenovo (dot) com/t5/A-and-P-Series/Lenovo-A536-stuck-during-firmware-upgrade/td-p/1744571[/url]
I downloaded the latest firmware from
"THIS is the latest original ROW firmware (PC Flash Tool installation)"
This whole guide was fine, it worked for me.
But the problem was when I tried to downgrade the firmware to an older version.
I tried to replace the lastest official firmware with this one ROM Android 4.4.2 (older official needrom(dot)com/download/lenovo-a536/
sorry can't link websites yet
http://forum.xda-developers.com/showthread.php?t=1943442
Try this thread
Tyaginator said:
http://forum.xda-developers.com/showthread.php?t=1943442
Try this thread
Click to expand...
Click to collapse
Thank you so much for staying with me to solve this problem. The phone is fixed.
I followed the
"
For MT6575/ 77
With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds...Typically, you need to click Download at SP Flash Tool before entering META mode or it will auto disconnected...
"
except I downloaded the lenovo a536 stock rom.
the only thing I did different was that I plugged in (META MODE) and THEN pressed download or else the usb would never be detected (they both show different COM numerals.)
After that I firmly held the whole usb into the phone during the whole flashing, or else it might get automatically disconnected again.
Then I updated/upgraded to the latest firmware, And it is all optimal. :good:
THANKS AGAIN !!!
lenover9000 said:
Thank you so much for staying with me to solve this problem. The phone is fixed.
I followed the
"
For MT6575/ 77
With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds...Typically, you need to click Download at SP Flash Tool before entering META mode or it will auto disconnected...
"
except I downloaded the lenovo a536 stock rom.
the only thing I did different was that I plugged in (META MODE) and THEN pressed download or else the usb would never be detected (they both show different COM numerals.)
After that I firmly held the whole usb into the phone during the whole flashing, or else it might get automatically disconnected again.
Then I updated/upgraded to the latest firmware, And it is all optimal. :good:
THANKS AGAIN !!!
Click to expand...
Click to collapse
Glad it's fixed
I Too Need help my lenovo a536 is bricked
My phone is not booting , unable to install USB VCOM Drivers and it is constantly going off while installing and unable to install driver ,phone vibrates shows logo but it goes in bootloop pls help urgent:crying:
prathamsd4 said:
My phone is not booting , unable to install USB VCOM Drivers and it is constantly going off while installing and unable to install driver ,phone vibrates shows logo but it goes in bootloop pls help urgent:crying:
Click to expand...
Click to collapse
What do u mean by "it is constantly going off while installing"
Does it boot in recovery mode? Please be as specific as you can while posting questions.
Sent from a Device using an App!
Tyaginator said:
What do u mean by "it is constantly going off while installing"
Does it boot in recovery mode? Please be as specific as you can while posting questions.
Sent from a Device using an App!
Click to expand...
Click to collapse
it does not boot in recovery mode,
while trying to install mediatek usb vcom drivers phone constantly connects and disconnect and i am unable to install drivers..
prathamsd4 said:
it does not boot in recovery mode,
while trying to install mediatek usb vcom drivers phone constantly connects and disconnect and i am unable to install drivers..
Click to expand...
Click to collapse
I don't think you need to connect phone during installing drivers and phone will stay connected after properly installing DA Vcom drivers
Sent from a Device using an App!
I have similar problem
Hi, please I need your help. I tried to flash stock ROM but I hard bricked my phone. When I connect phone with computer I'm holding volume up button. In device manager it shows "MediaTek USB Port (COM4)" but after three seconds it disconnect. This is why I can't flash ROM. It's everytime disconnect after three seconds.. Please help me.
Lenovo A536
Please help me guys, where is GND and COLO point of lenovo a536
same problem
i have a lenovo a536 and when i flash the stock
it goes to a cycle of off and on , help me to fix this
ive tried a lot of stock roms i searched,and none of them worked , the cycle of turning off and on is still there
Recently i tried flashing cwm recovery using sp flash tools. I followed an online tutorial which asked me to specifically download the boot. Img (patched) and recovery. Img, which was cwm. I insatlled all the drivers as asked then I turned off my device as asked and connected the device using usb cable after pressing the download button on sp flash tools. After a few seconds i saw the red line which is the starting of the flashing process, and then i received an error 'b_rom error" or something like that... I forgot, i dont have screenshot .
The phone is not responding since then, but when i connect the phone to my laptop the phone is recognised as 'mediatek da com port' but this driver doesnt work if i want to flash the stock rom using the sp flash tools, the internet says that i need the 'mediatek preloader driver' which is supposed to appear for 2 seconds in the device manager section and dissapear, but alas this doesnt appear in my case, and i guess this is really important for flashing the stock rom using sp flash tools. I tried many ways to install the mtk preloader driver but even of it installs it is not compatible with my device. I cant find this driver and hence i cant bring my phone back from the dead
If any member could help me here i would be really thankful , i have the stock rom downloaded and all the drivers as asked in various tutorials so i am helpless now. Please someone respond to this thread...
My device is xolo 8x 1000i with mediatek 6592 octacore chip.
Thankx ahead
ron2yee said:
Recently i tried flashing cwm recovery using sp flash tools. I followed an online tutorial which asked me to specifically download the boot. Img (patched) and recovery. Img, which was cwm. I insatlled all the drivers as asked then I turned off my device as asked and connected the device using usb cable after pressing the download button on sp flash tools. After a few seconds i saw the red line which is the starting of the flashing process, and then i received an error 'b_rom error" or something like that... I forgot, i dont have screenshot .
The phone is not responding since then, but when i connect the phone to my laptop the phone is recognised as 'mediatek da com port' but this driver doesnt work if i want to flash the stock rom using the sp flash tools, the internet says that i need the 'mediatek preloader driver' which is supposed to appear for 2 seconds in the device manager section and dissapear, but alas this doesnt appear in my case, and i guess this is really important for flashing the stock rom using sp flash tools. I tried many ways to install the mtk preloader driver but even of it installs it is not compatible with my device. I cant find this driver and hence i cant bring my phone back from the dead
If any member could help me here i would be really thankful , i have the stock rom downloaded and all the drivers as asked in various tutorials so i am helpless now. Please someone respond to this thread...
My device is xolo 8x 1000i with mediatek 6592 octacore chip.
Thankx ahead
Click to expand...
Click to collapse
If you can see DA VCOM port when u connect the phone that means there is no need of mtk preloader to appear. You can try flashing the stock firmware.
If you really want to see mtk preloader 65xx, then right click on DA vcom port and click uninstall drivers. Then you will see mtk preloader 65xx for 2 seconds everytime you connect the phone.
Gud luck
Sent from my Android One
Tyaginator said:
If you can see DA VCOM port when u connect the phone that means there is need of mtk preloader to appear. You can try flashing the stock firmware.
If you really want to see mtk preloader 65xx, then right click on DA vcom port and click uninstall drivers. Then you will see mtk preloader 65xx for 2 seconds everytime you connect the phone.
Gud luck
Sent from my Android One
Click to expand...
Click to collapse
first of all thankx for your swift reply
and coming to the driver part.. i tried uninstalling the da drivers but it reverted to someother driver nit mtk preloader it had a different name.... whatsoever
and finally... my device is up and running its a miracle.... i kept it for a whole day and later i plugged in the charger and viola the phone was discharged and it started charging
also i have another problem with which i ll start a thread.. do keep an eye out please sir
thankx again [emoji4] [emoji4] [emoji4]
Sent from my 8x-1000i using Tapatalk
Hi
I've Samsung S7582 clone .I would like to flash it due to PIN code forgotten but When I connect it to PC the device does not show up in device manager. But when in Meta mode (keeping volume - pressed then connect USB cable or make short between KCOLO test pin with GND ) window sense it but does not recognize it and keep connect and disconnect continuously .( mtk preloader vcom drive installed manually.)
So please if anybody knows how to flash this device tell me.
Thanks in advance
aakr said:
Hi
I've Samsung S7582 clone .I would like to flash it due to PIN code forgotten but When I connect it to PC the device does not show up in device manager. But when in Meta mode (keeping volume - pressed then connect USB cable or make short between KCOLO test pin with GND ) window sense it but does not recognize it and keep connect and disconnect continuously .( mtk preloader vcom drive installed manually.)
So please if anybody knows how to flash this device tell me.
Thanks in advance
Click to expand...
Click to collapse
did you tried to boot at recovery to try a factory reset? meta mode is for fixing baseband and imei and it uses adb to send baseband to the modem partition. try to press vol up or down or both + power instead.
There is no factory reset at recovery in this clone phone.
aakr said:
Hi
I've Samsung S7582 clone .I would like to flash it due to PIN code forgotten but When I connect it to PC the device does not show up in device manager. But when in Meta mode (keeping volume - pressed then connect USB cable or make short between KCOLO test pin with GND ) window sense it but does not recognize it and keep connect and disconnect continuously .( mtk preloader vcom drive installed manually.)
So please if anybody knows how to flash this device tell me.
Thanks in advance
Click to expand...
Click to collapse
Have you tried these solutions.
http://forum.xda-developers.com/showthread.php?t=2620456
Ashwinrg said:
Have you tried these solutions.
http://forum.xda-developers.com/showthread.php?t=2620456
Click to expand...
Click to collapse
These solutions are not possible because the PC could not recognized the device .So first we need solution to recognize it to windows.
UP