Database Info

Star X26i - 4 Inch Screen 1GHz CPU 5MP Camera Android 4.0

Hi, I have just bought the phone called Star X26i from Android-Sale: Star X26i
It is quite a good phone with beautiful screen and buttons.
UPDATE 1: How to root Star X26i by using TPSparkyroot: Thanks to admonish & Ferny_77
1. ( Optional ) Download Android SDK and install from here: http://developer.android.com/sdk/index.html
2. Download TPSparkyroot OR ROOT v5 Eng By Canerpense
3. Run adb.exe.
4. Run TPSparkyRoot.exe and follow instructions.
UPDATE 2: Original Firmware 19th June ( Not tested ) : Many thanks to AshleyJackson94 for the firmware. Instruction is brought to you by zBeYuz
0. Download Original Firmware 19th June
1. MTK 6575 Driver must be installed ( Turn off the phone, take out the battery and plug into the PC, it will ask for installing a new device ):
2. Download MTK 6575 Flash Tool
3. a) Go to Flash tool folder and run SPMultiPortFlashDownloadProject.exe
b) Choose Factory Database --> Setup data source file: "MTK_DATABASE.mdb"
c) Choose File --> Open download agent file: "MTK_AllInOne_DA.bin"
d) Choose Scatter File: "MT6575_Android_scatter_emmc.txt" in Firmware folder.
e) Choose the figure same as the picture here: Setting For SmartPhone MPD
f) After that turn off your phone and take out the battery and then hit the "Start all" button to start the process.
g) Quickly plug in your phone into the computer and the tool should begin to flash the firmware in less than 60 seconds if the driver is installed correctly.
h) You will see the green bar which indicates " Write Ok " means you are safe to remove the phone and the process has been completed.
P/s: Good Luck and Fighting !!!
Tips & Tricks:
1. For those who have Wifi issue, can try out this code in build.prop to see whether it makes any differences:
a) Change:
wifi.supplicant_scan_interval=150
b) Add below this code:
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
2-a. To reduce CPU speed in order to save the battery:
1. Install Setcpu in Google Play
2. Set Cpu to on demand instead of performance.
3. Save and monitor the battery life again.
2-b. A few profiles in setcpu to help manage the power ( Thanks to lansi23 )
There are 4 speeds for the phone:
166 250 500 1000
-When screen off
166-250
-In call
166-250
-Screen on
166-1000
3. Thanks angelobiz: For remove old, hidden driver you can see this: http://www.tech-recipes.com/rx/504/how-to-uninstall-hidden-devices-drivers-and-services/
4. Thanks caviar44: This is a tool to remove old drivers: USBDeview v2.11. Just right click on driver instance and then choose "uninstall selected devices".
5. Moborobo - The Android Smartphone PC Manager ( You can use it to install apps, make a backup, blah blah ) : Moborobo
P/s: If anyone comes across a custom recovery for the phone, please also post it here.
Fighting !!! :good:

Anyone ?

How much is Star X26i? I think it is the same as the Star Xperia S LT26.

I bought it for $165 including shipping fee

toffzter said:
How much is Star X26i? I think it is the same as the Star Xperia S LT26.
Click to expand...
Click to collapse
This two phones are the same, no difference !

zbeyuz said:
Hi, I have just bought the phone called Star X26i from Android-Sale: http://android-sale.com/x26i-4-3-inch-screen-1ghz-cpu-5mp-camera-android-phone.html
It is quite a good phone with beautiful screen and buttons.
Btw anyone know how to root this phone ?
Click to expand...
Click to collapse
By the way, who is the manufacturer of this Star X26i phone. Any website ....any idea???

Sorry, I have no idea who was the manufacturer

Up for this topic

I was very sad when I saw the reviews (talkingmobi. com/?p=3015).
So, those are the differences between REAL and FAKE. With millions of eyes, the truth will always come out. I would like to show u the REAL details and tested 5 times about LT26 on FCT:
Star Xperia S LT26 LT26i XT26 MTK6575 Hot Spot
4 inch WVGA screen, 800*480 pixel
MTK6575 1GHz processor + GPU: PowerVR SGX531(Cheap version by MTK6573 CPU 640MHZ + GPU 460MHZ)
Click to expand...
Click to collapse
Also, he demonstrated screenshot of android-sale.
Sorry 4 my english.

I don't know why I can't load the link above. Can you tell me why you don't like this phone ? As I am having one and quite satisfied with it.

zbeyuz said:
I don't know why I can't load the link above. Can you tell me why you don't like this phone ? As I am having one and quite satisfied with it.
Click to expand...
Click to collapse
He wrote - x26i have MTK6573 processor (Freq: 640MHz), but at the price specified android-sale = 1GHz. I do not know who to believe.

Mobyman.nsk said:
He wrote - x26i have MTK6573 processor (Freq: 640MHz), but at the price specified android-sale = 1GHz. I do not know who to believe.
Click to expand...
Click to collapse
Ok, I got it. Since there are two versions of this phone, one with MTK6575, which is 1Ghz processor, is my phone and the cheaper version runs MTK6573 which is 640MHz.
I think you should get MTK6575 version as it will make a big difference.

could be similar to the Star N8000, same specs, there is a root procedure for the N8000 in the Star N8000 thread but don't know if it will work for this phone...

Thanks drmosh, I will try it out

Hi, i've bought one that i should receive next week.
Any root procedure or rom to update it ?
TBH

thebighunt said:
Hi, i've bought one that i should receive next week.
Any root procedure or rom to update it ?
TBH
Click to expand...
Click to collapse
I'v had this phone for a couple of days now and Im loving it. There is only one small downside, wifi SUCKS the battery out of this one. So I hope a future rom or modification can remedy this.
I managed to root it today using TPSparkyroot
Someone let me know if I should post the build.prop file for modification possibilites. Maybe there is something that can be edited to lower wifi battery drain

Hi and thanks
I hope that there will have enought user to build a kind if "community" here as this phone is new.
But i also think that the hardware is quite similar as lot of other china droid phone...
Does the two sims cards work well ?
Cheers
TBH

thebighunt said:
Hi and thanks
I hope that there will have enought user to build a kind if "community" here as this phone is new.
But i also think that the hardware is quite similar as lot of other china droid phone...
Does the two sims cards work well ?
Cheers
TBH
Click to expand...
Click to collapse
I have only tried one of the sim card slots, which works flawlessly. The 3G part is also working like it should.
I can also confirm that the GPS works with Google Maps

admonish said:
I'v had this phone for a couple of days now and Im loving it. There is only one small downside, wifi SUCKS the battery out of this one. So I hope a future rom or modification can remedy this.
I managed to root it today using TPSparkyroot
Someone let me know if I should post the build.prop file for modification possibilites. Maybe there is something that can be edited to lower wifi battery drain
Click to expand...
Click to collapse
Hi admonish, I also used TPSparkyroot to root but not successful. Can you upload your root files through Mediafire for me so that I can post it on the first page for people who owned this phone and wanted to root. Thanks a lot.
Btw, I am also in love with this phone and about wifi issue, you can try this code out in build.prop to see whether it makes any differences:
1. Change:
wifi.supplicant_scan_interval=150
2. Add below this code:
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
FIGHTING !!!

Hi
I think this phone will be a success (china phone i mean).
Perhaps, someone should adk for a forum special page ?
Cheers
TBH

[rom] alphadroid 2 for allwinner a13(mmx alpha)

note: i do not take any reponsibility of any harm or damage cause to u r device
THIS IS MY FIRST WORKING CUSTOM ROM this rom is for micromax funbook alpha and also work on other allwinner a13 motherboard tabs
Major update alphadroid_3 IS HERE
This rom has been DISCONTINUED
this rom is tested my me working beautifully !
FEATURES :
remove unnecessary apps
STOCK KERNAL
beats audio added don't know fully working or not !
int.d support
much more
i forget to remember !
WARNING TOUCH SCREEN OF THIS ROM MAY OR MAY NOT WORK WITH U R TAB SO BE CAREFUL CREATE A BACKUP FIRST BEFORE INSTALL I HAVE ONLY TESTED THIS ROM IN MY TAB SO I CAN'T GUARANTEE THAT IT WILL WORK ON U R TAB !!!!!
things to do
add bluetooth support(need dev help)
add support to ad hoc connection(need dev help)
HOW TO INSTALL
take backup of ur rom before installing this one for cwm go here http://forum.xda-developers.com/showthread.php?t=1906177
WIPE FACTORY RESET
WIPE CACHE PARTITON
INSTALL THE ROM
WIPE CACHE PARTITON
REBOOT
note if u r facing root access problems go to cwm and fix permission this will solve ur problem
please do not send me pm i will not respond to it. if u have any question post here do not pm me
To avoid lags download no fill cpu control and set minimum frequency as max frequency but it will decrease battery more fast
changelogs : 14/11/2012
Initial release !
changelogs : 02/2/2013
change external sd card as internal sd card
more smoother(near to project butter added)
always awake (helps u to stay connected with internet while turning the screen off)
seeder added
supremacy trilogy added
build.prop tweaks
battery and internet tweaks
and forgot to mention all find it yourself !
credits
willing magic
xda-developers.com
shivam(for uploading this rom)
bugs:
tell me if u find anyone
BUT AFTER DOWNLOADING PLS CLICK ON THE THANKS BUTTON
alphadroid 1
ALPHADROID 2

Awesome work man! congrats!!! downloading it now.
Listen is there anyway to increase the internal storage space?? by using recovery.?

tried the rom...working awesome! :good:
you tried that jelly bean rom you were talking about?

no dude !
voldemort01 said:
tried the rom...working awesome! :good:
you tried that jelly bean rom you were talking about?
Click to expand...
Click to collapse
I haven't tried it yet I am little busy now days I am glad that u like my work and hope it will continuous in this way !

voldemort01 said:
tried the rom...working awesome! :good:
you tried that jelly bean rom you were talking about?
Click to expand...
Click to collapse
I can't find any way and I thought that it is impossible to increase much internal memory after deleting unwanted apps but I will work on it as I will get time waiting for response from everyone ! about this rom.............

icoolguy1995 said:
I haven't tried it yet I am little busy now days I am glad that u like my work and hope it will continuous in this way !
Click to expand...
Click to collapse
i downloaded that jelly bean rom. But it only has .img file. How do i flash that? if you can tell me, ill try it out.

voldemort01 said:
i downloaded that jelly bean rom. But it only has .img file. How do i flash that? if you can tell me, ill try it out.
Click to expand...
Click to collapse
u can flash it by novotools 7 in novotools there is a option to flash .img file

can you show us some pics please?

icoolguy1995 said:
u can flash it by novotools 7 in novotools there is a option to flash .img file
Click to expand...
Click to collapse
you mean flash boot option? cuz theres only 3 options flash recovery and flash update.zip being the other 2.

Thread reopened.

tread is once again open i am so glad so guys help me and give the ratings of this rom !

@icoolguy1995, I have this tab,
Model: A13-MID
Brand: softwinners
CPU: sun5i
CPU Model: ARMv7 Processor (VFPv3, NEON)
CPU Freq: 60 - 1008 MHz
Screen Res: 800 x 432
GPU Vendor: ARM
GPU: Mail-400 MP
GPU ver.: OpenGL ES 2.0
Memory Size: 1024 MB
Android Ver: 4.0.4
Build: nuclear_evb-eng 4.0.4 IMM76D 20120917 test-keys
I flash with alphadroid and it booting fine. Only one big problem is that touchscreen is not working at all.
I used wired usb mouse (cheap knock off wireless mouse also working great!) and installed novo tool but cannot reboot into recovery because root permission problem. I tried with hardware button to boot into recovery but none work with power+vol.up button nor power+vol.down button. What else can I do? I really LOVE the rom!!!
EDIT: I can get into CWM by going to SETTINGS --> BACKUP & RESET --> Recovery Mode.
I run FIX PERMISSIONS but when rebooted the root permission denied is still there when I run TBP.
Can you fix the touchscreen and the root access please. I like this rom...
EDIT2 : Ran lsmod and find out that my ts is gsl1680.

Dear Sir,
Can you add support for my A13 based tablet. Please let me know. I will upload the dump of my tablet.

al5911 said:
@icoolguy1995, I have this tab,
Model: A13-MID
Brand: softwinners
CPU: sun5i
CPU Model: ARMv7 Processor (VFPv3, NEON)
CPU Freq: 60 - 1008 MHz
Screen Res: 800 x 432
GPU Vendor: ARM
GPU: Mail-400 MP
GPU ver.: OpenGL ES 2.0
Memory Size: 1024 MB
Android Ver: 4.0.4
Build: nuclear_evb-eng 4.0.4 IMM76D 20120917 test-keys
I flash with alphadroid and it booting fine. Only one big problem is that touchscreen is not working at all.
I used wired usb mouse (cheap knock off wireless mouse also working great!) and installed novo tool but cannot reboot into recovery because root permission problem. I tried with hardware button to boot into recovery but none work with power+vol.up button nor power+vol.down button. What else can I do? I really LOVE the rom!!!
EDIT: I can get into CWM by going to SETTINGS --> BACKUP & RESET --> Recovery Mode.
I run FIX PERMISSIONS but when rebooted the root permission denied is still there when I run TBP.
Can you fix the touchscreen and the root access please. I like this rom...
EDIT2 : Ran lsmod and find out that my ts is gsl1680.
Click to expand...
Click to collapse
for touchscreen there is a one solution try to change the kernal !
and for the root access problem flash the rom - shut down the tab - restart it- if root access problem is there go to cwm after that go to advance option - fix permission reboot recovery- reboot system or i don't know the exactly word there here when u reboot system it will ask u about root access read it and then go to yes button
or
try once again unlockroot

harishgayatri said:
Dear Sir,
Can you add support for my A13 based tablet. Please let me know. I will upload the dump of my tablet.
Click to expand...
Click to collapse
did u tried this rom ?
and one more things i am busy these days and as i will get time first i will continue the development of second version of alphadroid half is ready but there are bugs to be sought out so it will take some time as far as supporting u r tab i will currently say that no or maybe in the future first try this rom if it works on ur tab than it will be good for u

icoolguy1995 said:
for touchscreen there is a one solution try to change the kernal !
and for the root access problem flash the rom - shut down the tab - restart it- if root access problem is there go to cwm after that go to advance option - fix permission reboot recovery- reboot system or i don't know the exactly word there here when u reboot system it will ask u about root access read it and then go to yes button
or
try once again unlockroot
Click to expand...
Click to collapse
For the root problem I had solved it by re-rooting it using doomlord method. But how can I change the kernel? Can you tell me?

al5911 said:
For the root problem I had solved it by re-rooting it using doomlord method. But how can I change the kernel? Can you tell me?
Click to expand...
Click to collapse
just change the boot.img with the find of yours i mean that u can use the boot.img of willingmagic cyanogenmod 9 i don't know if it will work or not but u never know if it works !

Your rom looks pretty good. Nice job.
My touchscreen works... but it's inverted left to right, there must be a way to fix this? Thank you very much.

koodiifin said:
Your rom looks pretty good. Nice job.
My touchscreen works... but it's inverted left to right, there must be a way to fix this? Thank you very much.
Click to expand...
Click to collapse
it will be solved in alphadroid v2
i am hoping so, it is a very improve version of this current one currently adding some tweaks and testing it !

I'm unable to backup. I just get 'cant mount backup path'

ROOT the Karbonn A15

OK got the Karbonn A15 yesterday dubbed as a Ninja Killer by some was able to root it today
here are the steps
the driver files are included on the phone internal card called pcdrivers.zip. you can connect the usb mount the internal usb storage and copy the file to your pc. if you face any problems you can download the file from here
1. Enable USB Debugging - Under SETTINGS - DEVELOPER OPTIONS
2. Install the drivers for the phone - copy drivers from your phone internal card or download from here
3. download "Android Root Unlock" from sourceforge.net and extract it to a folder on your harddisk
4. navigate to the above folder and run the batch file ICS_Root_Unlocker.bat
the batch file will reboot your phone a couple of times and will wait with a message "Press Any Key to continue"
IMP NOTE : if you pc is saying "PRESS ANY KEY" note if your phone is on or rebooting....
if it is Rebooting, wait for it to start before pressing a key
5. After a couple of boots the phone will be rooted
6. verify that the Root is complete by observing a "Superuser" shortcut in the application list
good luck
-ntstatic

ntstatic said:
OK got the Karbonn A15 yesterday dubbed as a Ninja Killer by some was able to root it today
here are the steps
the driver files are included on the phone internal card called pcdrivers.zip. you can connect the usb mount the internal usb storage and copy the file to your pc. if you face any problems you can download the file from here
1. Enable USB Debugging - Under SETTINGS - DEVELOPER OPTIONS
2. Install the drivers for the phone - copy drivers from your phone internal card or download from here
3. download "Android Root Unlock" from sourceforge.net and extract it to a folder on your harddisk
4. navigate to the above folder and run the batch file ICS_Root_Unlocker.bat
the batch file will reboot your phone a couple of times and will wait with a message "Press Any Key to continue"
IMP NOTE : if you pc is saying "PRESS ANY KEY" note if your phone is on or rebooting....
if it is Rebooting, wait for it to start before pressing a key
5. After a couple of boots the phone will be rooted
6. verify that the Root is complete by observing a "Superuser" shortcut in the application list
good luck
Click to expand...
Click to collapse
Can you provide details of this handset
PPI density etc etc

Wow, that was really fast dude !
Btw please upload the rooted stock Rom once CWM is ported for this, it's chipset May be compatible with A9
Sent from my Fanta9stic using xda app-developers app

JellyBean mods for Karbonn A15
I know this is too much to ask...since Cyanogen does not support S1 processors..still
any hopes of a JellyBean mods for Karbonn A15...?

prasad12ka4 said:
Can you provide details of this handset
PPI density etc etc
Click to expand...
Click to collapse
check out http://mobiles.pricedekho.com/mobiles/karbonn/a15-price-pmk5s.html#Specifications
which may not list the RAM etc
RAM=512
ROM=512 ?
INTERNAL=2.5 G ? (>2G will verify on my device later )
the above listing says FM =No however there is a preinstalled FM app so FM must be present - never use it so not checked - will check later
the G- Sensor is off by a lot on my piece - orientation works (can it be calibrated ?)
Display 4" @ 480x800
overall a very nice piece at Rs 5900

vishwasnp said:
Wow, that was really fast dude !
Btw please upload the rooted stock Rom once CWM is ported for this, it's chipset May be compatible with A9
Sent from my Fanta9stic using xda app-developers app
Click to expand...
Click to collapse
I'm a newbie at this thing - so will have to check how to dump the stock rom - can you people point me in the right direction which will save me a lot of googling - there must be an app somewheres ?? or do i have to connect to a pc ??

bitspirit said:
I know this is too much to ask...since Cyanogen does not support S1 processors..still
any hopes of a JellyBean mods for Karbonn A15...?
Click to expand...
Click to collapse
- as i said above i am very new to all this will have to study the whole thing a little - no expections for a custom rom from my side for quite some time
but the handset is very new in the market and rooting is the first step - i am sure people more knowledgable will provide some insight
overall Karbonn A15 seems a bargain ICS handset at this price.- no complaints so far....

karbonn a15
hey congrats man you did it really fast.can you tell me how is battery backup of this phone i was thinking to buy.
and mentioning battery backup while using 2 sims.

about root android
I need to know is.
1. why root is so necessary?
2. is most of branded droids are rooted?
3. does it void warranty?
please reply

prasad12ka4 said:
Can you provide details of this handset
PPI density etc etc
Click to expand...
Click to collapse
Karbonn A15
- Android 4.0.4
- ARMv7 processor rev 1 (v7l)
- Product: msm7627a
- Board: 7x27
- Cores: 1
- Max freq: 1008MHz Min freq: 122.88MHz
- Memory Total: ~385MB
- Kernel: 3.0.21
- 4" Display resolution: 480x800 (160x160 DPI)
- GPU: Adreno 200
- Sensors: 3-axis Acclerometer, proximity, light
- Multi-Touch points: 2
- Internal Storage: 581MB+2.57GB
Search on Youtube for a video review.

032145 said:
hey congrats man you did it really fast.can you tell me how is battery backup of this phone i was thinking to buy.
and mentioning battery backup while using 2 sims.
Click to expand...
Click to collapse
i have been using it for only 2 days. on the first day it seemed that battery drained really fast but the next day it was better i would be able to give a better feedback in a few days.
all in all it seems the battery will last at least one day with heavy usage and around 2 days for someone like me (very low usage)

Hey.. can you please tell me about the display quality? Also, does it support 720x576 or 720x480 playback? I know it does not play 720p files but if it can play 576p files then I'll buy it..
Thanks!

smondal29 said:
I need to know is.
1. why root is so necessary?
2. is most of branded droids are rooted?
3. does it void warranty?
please reply
Click to expand...
Click to collapse
1. Not necessary if you don't intended to tweak system files, gain system access permission,
2. All Android devices are rootable, but usually by default don't have root access
3. Yes warranty voided while rooting but you can unroot again
Sent from my ST21i

nevermind.. I bought it anyway.. found a deal which was too good to resist will root it as soon as I get my hands on it! Is it possible for you to post an unrooting guide as well? (just in case the phone needs to be taken to a service centre)

Thanks for the update and waiting for your better feedback in few days on battery backup and for how much you bought it?

the handset is available for 4700rs on homeshop18 website. please tell me if there is any problem with the device as i would like to order it now
Deal is too tempting

kartikoli said:
the handset is available for 4700rs on homeshop18 website. please tell me if there is any problem with the device as i would like to order it now
Deal is too tempting
Click to expand...
Click to collapse
4700 is too good i got it for 5900
there is no problem with the device

so its a go for me ... thanks brother
even karbonn a9+ is available for 7.2k
i was thinking to go between either of 2 but decided to save some money and settle for A15 as i dont play much games on mobile[totally opposite in case of PC] so dont need dual core device
just wanted to know smoothness and basic phone usage like volume of earphone or during the calls , messaging etc...

kartikoli said:
so its a go for me ... thanks brother
even karbonn a9+ is available for 7.2k
i was thinking to go between either of 2 but decided to save some money and settle for A15 as i dont play much games on mobile[totally opposite in case of PC] so dont need dual core device
just wanted to know smoothness and basic phone usage like volume of earphone or during the calls , messaging etc...
Click to expand...
Click to collapse
smoothness of the phone is excellent, did not find any lag while operating the phone, or while testing using Temple Run. the movement is very smooth. volume is good no problem there.
the only thing that is worth mentioning is that the Gravity sensor is off in my phone - meaning if i keep the phone on a flat surface it detects that the phone is leaning to the left and a little top. is this a calibratable thing in the settings or such ?

ntstatic said:
smoothness of the phone is excellent, did not find any lag while operating the phone, or while testing using Temple Run. the movement is very smooth. volume is good no problem there.
the only thing that is worth mentioning is that the Gravity sensor is off in my phone - meaning if i keep the phone on a flat surface it detects that the phone is leaning to the left and a little top. is this a calibratable thing in the settings or such ?
Click to expand...
Click to collapse
I am planning to scrap my new bought Micromax A87 for this one?
What do you think?
Also shall we start a different development thread for this like we did for A9, A7 and A5?

[TUTORIAL][GUIDE]Complete Guide to ROOTING, CWM & ROM(s) for LAVA ETAB XTRON+(RK3066)

[TUTORIAL][GUIDE]Complete Guide to ROOTING, CWM & ROM(s) for LAVA ETAB XTRON+(RK3066)
Here is a short review first
| HARDWARE |:-: Talking about the Lava Xtron+’s hardware, the tablet boasts a dual core Cortex A9 CPU with each core clocked at 1.5Ghz and a Mali 400 Quad Core GPU.
Well, for the proof of graphics power, see the benchmarks by fonearena.com ,63.9 fps in nenamark, and the most important thing according to me, RK3066 IS THE BEST LAST GEN GAMING CHIPSET BETTER THAN TEGRA 3...I am a true geek and after searching for 20+ hours came to a conclusion that this is the best piece of android till 12-13k,(except Lumia 520 but it is windows)..
| BATTERY | :-:Coming on to battery, When I opened the battery stats page I find that Cell standby had consumed nearly 60% of the battery.WHAT!? Cell standby is the battery used by radio cells for mobile networks. This tablet DOES NOT have cell radio! The engineers working on this tablet didn't even bother to setup the OS properly and instead chose to simply download Android 4.2, flashed it in the tablet and have put it up on sale.
The Flipkart page reports the battery capacity to be 3,700mAh, which is probably wrong since the official specifications page on Lava’s website reports it to be only 3,000mAh. I can't be sure..:silly:
AIRPLANE MODE IS NOT COMPLETELY WORKING DUE TO DEFECTIVE DRIVERS (CELL RADIO DRIVERS ARE PRESENT IN THIS TAB SO IT SEARCHES FOR DRIVERS CONTINUOUSLY AND FUC*S BATTERY UP!:crying There is a fix in the post
| SCREEN |:-:The front of the Lava Xtron+ holds a 7-inch sharp IPS LCD display having a resolution of 1024 x 600. It’s a bright screen and with a pixel density of 170 PPI, it is pretty sharp too. The best part about the display is that, despite being an LCD screen, it’s not a battery consuming monster. I always found its battery usage to be lower than processes. The screen is prone to scratches though and is highly reflective.
We can enable the biggest advantage of PC gaming in android now, i.e 4xMSAA in deveoper settings, makes gaming experience even better than tegra 3
Click to expand...
Click to collapse
Before starting i would say that i am not responsible if any guides here bricks your device ( it should not happen at all if u follow all steps properly as the chances of permanent brick of rk3066 is very slim but boot loop is a possibility) I made this thread to collect everything I've done in one place. This should make everything very straightforward and basically most probably n00b-proof.
| ROOTING | :-:
Pre Requisites-Working drivers (if not then no problem), OEM USB Cable, LAVA ETAB XTRON+, 2 windows apps and PATIENCE
{Screen shots of important steps is in the attachements}
(i) For Drivers download and install moborobo
HTML:
http://download.moborobo.com/download/Client/Moborobo(Moborobo_En_official).exe
(ii) In tablet go to in Settings >developers options and turn it on and enable USB Debugging & before connecting it to your PC go into the tab's
settings again and click on storage.In it you will find 3 dots in top right hand corner.> USB computer connection >Enable Mass storage
Note: DO "NOT" TURN USB STORAGE "ON".(When Connected to PC)
Note: Remove your external SD card before rooting.
(iii) Connect it to your PC and click on refresh and install/find drivers and it will download and install them..(there might be a security warning
about force install) Now, it may not recognize the model no, IMEI and other things and say that the device is JB7+ but the only thing you
should look for to make sure it is the right device is the total size and usage of internal Memory and NAND Flash..
(iii) Now drivers are securely installed and the tab is connected in the right way (there is no OEM (LAVA) drivers anywhere)
Download the zdm (Chinese software) in the attachments (For Every Step first see the screenshot)
Note:IT MAY INSTALL SOME USELESS SOFTWARE ON UR PC AND TAB , BUT IT CAN BE UNINSTALLED.
(iii)) When it detects the there will be something written like this in the bottom right corner :??ROOT : ONE or something like that (not in screen
shots as the tab is already rooted ) but it must be in green colour.This is the confirmation that the device can be rooted.
(iv) Now click on the Root Button in left hand side
(v) Click twice on green (thingy) first where it says ROOT then again for the confirmation popup (says something else but in green box)
(vi) Rooting Process has begun and the tab will restart (my PC is quite fast so it was almost instantly restarted and the Super SU was flashed it may or may not take 2-3 mins)
Note:IT WILL INSTALL SUPERUSER , WHICH IS OUTDATED BUT BEFORE DOWNLOADING OTHER SUPERUSER APP , USE THE ONE PRE-INSTALLED TO UPDATE SU BINARY.
DEVICE IS ROOTED WOOT! WOOT! you can also check by using Titanium Backup or root checker.
Mod Edit: Rooting method also described by Mohd.Anas here: http://forum.xda-developers.com/showthread.php?p=48776299
How to fix battery:-:
Get root explorer open system/app and rename phone .apk and telephonesomething.apk to phone.bak and telephonysomething.bak, you are good to go..
Also, you should change the WiFi scanning interval to 500 I.e 5 min as you really just require one scan when connecting to a known network..change the wifi supplicant scan interval to 500 build.prop
| CLOCKWORKMOD CUSTOM RECOVERY (GENERIC RK3066) 6.0.3.1|:-:
There are 2 methods one is tested by me(both are the same recovery created by the famous user "fun" at androtab.info), it works on our tab because when I opened the kernel.img with a hex editor (like Neo Hex Editor) the first line started with "KRNL" so I have a dedicated kernel in the kernel partition and I can just use the generic CWM. You can also follow this procedure just to be sure..make a online nandroid backup find kernel.img and open it up in pc in hex editor..
(A)METHOD TESTED BY ME
(i) Firstly you have to get the arctools apk,either by registering at their forum..
HTML:
http://www.arctablet.com/blog/forum/arctools-application/clockworkmod-cwm-recovery-easy-install-on-rk3066-and-rk3188-devices/
(ii) Click on download and select RK3066 CWM fun androtabinfo 6.0.3.1, there is only one option like that so it may or may not be in order.
(iii) Afer downloading click on install apps give i superuser permission and Voila! CWM.
(iii) You should also see the log right in the middle of the apps to verify that the flash and push thingy worked correctly with no errors
(iii) Select Reboot to recovery or Turn the tab off and press power button+vol up and the recovery should open
YEAH! YOU NOW HAVE COMPLETE CONTROL OF YOUR TAB
(B)METHOD NOT TESTED BY ME
HTML:
http://androtab.info/clockworkmod/rockchip/
(i) DOWNLOAD RK30GENERIC_CWM.zip from
HTML:
http://androtab.info/clockworkmod/rockchip/
(ii) Here are the different ways to flash this zip file
HTML:
http://androtab.info/clockworkmod/rockchip/install/
|CUSTOM ROM(s)|:-:
There is only one ROM which is worth flashing and even that might be slightly buggy..
Well, I don't recommend to flash a custom ROM here as they may have bugs like Wifi still if you want the following features
Auto Install Feature: This allows you to install apk's automatically on first boot, if you have the apk files located in a folder named autoinstall on your external SD card.
HTML:
http://www.freaktab.com/showthread.php?8910-Auto-APK-Install-Feature
Rooted with SuperSU
Debloated of all Lava bloatware
Google Play Store tweaks added to improve availability of apps
Init.d support
Busybox support
English language default (all other languages are still supported)
Boot screens by Tattman65
Flash Tool by Finless
Reboot app by Petrus
Here is Lava Xtron+ RileyROM 1.1
HTML:
http://www.freaktab.com/showthread.php?10688-Lava-Xtron-RileyROM-1-1
Complete flashing procedure in extreme detail is in the ROM zip file (it is a PDF file named first time user guide , very helpful)..Personally I have not flashed the ROM as I don't think it is worth the hassle and possibility of no Wifi...
PLEASE CLICK ON THANKS IF I HELPED YOU, IT REALLY MOTIVATES ME!:highfive:

Thank you.. I was waiting for a method to crack this tab.. Will comeback with result.

Ext4 support
Can somebody tell me if ext4 is supported or not, when i try link2 sd it says not supported but I am pretty sure that the system partition itself is Ext 4, (I'm the one who made the guide)

Try ext3. It will be supported.

Prince.Paul.K said:
Try ext3. It will be supported.
Click to expand...
Click to collapse
Well, I have tried it there are some problem in link2sd, but according to an nandroid the system and data are ext4 , I have set up everything in ext2 and would hate to do it all over again, is there a way to verify support of ext 3 or 4 acc to wiki, kernel above 2.6 support ext4 and the kernel here is 3.0... One more ting, when I tilt the tab, I think that something heavy is moving around inside slightly, probably battery should I ask for a replacement? I have 4-5 days remaining I bought from flipkart, I do have a complete SD and nandroid backup..
EDIT: in d/tracing events ext4 there is a file called enable and the value inside is zero should I change it to 1
I think I found out the culprit, the first partiton that I tried was ext2 so link2d created a script for that..now, when I try to use ext3 or 4 ..it still tries to use that same script..so I willl delete the script then try again...

Successfully Rooted..! Sorry for the delay..!

Bro how to stop the battery draining in stand by due to deffective drivers as u say . I cant find the solution in this thread

HTC.EXPLORER said:
....
DEVICE IS ROOTED WOOT! WOOT! you can also check by using Titanium Backup or root checker.
Mod Edit: Rooting method also described by Mohd.Anas here: http://forum.xda-developers.com/showthread.php?p=48776299
How to fix battery:-:
Get root explorer open system/app and rename phone .apk and telephonesomething.apk to phone.bak and telephonysomething.bak, you are good to go..
| CLOCKWORKMOD CUSTOM RECOVERY (GENERIC RK3066) 6.0.3.1|:-:
There are 2 methods one is tested by me(both are the same recovery created by the famous user "fun" at androtab.info), it works on our tab because when I opened the kernel.img with a hex editor (like Neo Hex Editor) the first line started with "KRNL" so I have a dedicated kernel in the kernel partition and I can just use the generic CWM. You can also follow this procedure just to be sure..make a online nandroid backup find kernel.img and open it up in pc in hex editor..
(A)METHOD TESTED BY ME
..../QUOTE]
ukstillalive said:
Bro how to stop the battery draining in stand by due to deffective drivers as u say . I cant find the solution in this thread
Click to expand...
Click to collapse
Click to expand...
Click to collapse

HTC.EXPLORER said:
HTC.EXPLORER said:
....
DEVICE IS ROOTED WOOT! WOOT! you can also check by using Titanium Backup or root checker.
Mod Edit: Rooting method also described by Mohd.Anas here: http://forum.xda-developers.com/showthread.php?p=48776299
How to fix battery:-:
Get root explorer open system/app and rename phone .apk and telephonesomething.apk to phone.bak and telephonysomething.bak, you are good to go..
| CLOCKWORKMOD CUSTOM RECOVERY (GENERIC RK3066) 6.0.3.1|:-:
There are 2 methods one is tested by me(both are the same recovery created by the famous user "fun" at androtab.info), it works on our tab because when I opened the kernel.img with a hex editor (like Neo Hex Editor) the first line started with "KRNL" so I have a dedicated kernel in the kernel partition and I can just use the generic CWM. You can also follow this procedure just to be sure..make a online nandroid backup find kernel.img and open it up in pc in hex editor..
(A)METHOD TESTED BY ME
..../QUOTE]
Click to expand...
Click to collapse
you can also change wifi_suppliant_scan interval to like 150 or so, the default value is very less "20" :good:
Click to expand...
Click to collapse

Going to fix battery
Sent from JB 7+ using tapatalk

nitinchamp said:
HTC.EXPLORER said:
you can also change wifi_suppliant_scan interval to like 150 or so, the default value is very less "20" :good:
Click to expand...
Click to collapse
Alright I know this is a stupid question but..Does it continue to scan when it is connected to a WiFi network..I have also disabled the network norification and enable WiFi optimization...and thanks for the tip..ideally you should only turn scanning on when you want to connect
Edit: added your tip to guide will clean it up when I will use pc
Click to expand...
Click to collapse

HTC.EXPLORER said:
nitinchamp said:
Alright I know this is a stupid question but..Does it continue to scan when it is connected to a WiFi network..I have also disabled the network norification and enable WiFi optimization...and thanks for the tip..ideally you should only turn scanning on when you want to connect
Edit: added your tip to guide will clean it up when I will use pc
Click to expand...
Click to collapse
it still does scan for networks to see what other networks are present
there was also another method to root this tablet which i found back in december mentioned here
Click to expand...
Click to collapse

help
bro i have installed riley rom for lava xtron + tab but now i came to know that wi fi hotspot is a major bug for this rom and the rom is actually the copy of stock rom so i want to flash the stock rom again but cant ,,, so plz help me i have the stock rom zip file , now what to do ?/
plz reply :crying::crying::crying::crying::crying:

ukstillalive said:
bro i have installed riley rom for lava xtron + tab but now i came to know that wi fi hotspot is a major bug for this rom and the rom is actually the copy of stock rom so i want to flash the stock rom again but cant ,,, so plz help me i have the stock rom zip file , now what to do ?/
plz reply :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Well you are familiar with cwm or do you even have it installed, if you do then just go to install zip from sd card and select the zip file...secondly if you have a cwm nandroid backup (recommended) just go to backup and restore select resotre or restore from externel sd and then select the date of the required backup file then click restore..If you do have a cwm nandroid backup then it MUST work...if you don't even have the recovery then, ist step is to install it through THE guide then, try to do the ist (not recommended) option...

I have cwm installed on my tablet but i dont have stock rom of lava xtron plus

ukstillalive said:
I have cwm installed on my tablet but i dont have stock rom of lava xtron plus
Click to expand...
Click to collapse
Did you make a nandroid cwm backup before flashing ROM?
Also can you make the account as soon as possible

CM10 for Lava Xtron +
nitinchamp said:
HTC.EXPLORER said:
you can also change wifi_suppliant_scan interval to like 150 or so, the default value is very less "20" :good:
Click to expand...
Click to collapse
http://www.slatedroid.com/topic/41777-romcyanogen-10-for-rk3066-wip/
Check this thread is it possible to flash this on lava xtron + . Can any1 reply plz
---------- Post added at 03:46 AM ---------- Previous post was at 03:43 AM ----------
I have installed cwm in many devices before but first time in my tab and bro i dont hqlave a nandroid back of my stock rom
Click to expand...
Click to collapse

ukstillalive said:
nitinchamp said:
http://www.slatedroid.com/topic/41777-romcyanogen-10-for-rk3066-wip/
Check this thread is it possible to flash this on lava xtron + . Can any1 reply plz
---------- Post added at 03:46 AM ---------- Previous post was at 03:43 AM ----------
I have installed cwm in many devices before but first time in my tab and bro i dont hqlave a nandroid back of my stock rom
Click to expand...
Click to collapse
Then just take a backup of the ROM you currently have installed (I think Riley) and if the CM doesnt work out, revert back easily..:good: Post your results here
Click to expand...
Click to collapse

Lava Iris X5 Rooting Guide & General Discussion

[ Lava Iris X5 Rooting Guide & General Discussion ]​
Key Features:
Lava Iris X5 is a Smart Phone Powered by 5.00-inch HD 720x1280 pixels with 245 Pixels per inch (PPI) display,Android 4.4 KitKat,8 MP Auto Focus with with BSI Sensor for low light imaging and Broadcom 1.2GHz Quad Core processor coupled with Videocore IV GPU alongside 1GB RAM.
​
Rooting & Unlocking:
Code:
[B][SIZE="4"][COLOR="DarkRed"]Before You Begin[/COLOR][/SIZE][/B]
1. This will void the warranty of your device. We won’t be held responsible if you end-up bricking or damaging your device. Do it at your own risk.
2. This should only work on Windows based PCs Preferably Windows-7
3. There should be at least 65% charge in your
4. Make a Backup of Your Contacts,SMS,And Whats App data in SD Card
Code:
[B][SIZE="5"][COLOR="DarkRed"]Downloading Required Files:[/COLOR][/SIZE][/B]
Download Lava Iris X5 Root Toolkit [B][URL="https://drive.google.com/file/d/0B7OdRw3ALPgGdWcxOUx0c0llMGs/edit?usp=sharing"]Click Here To Download[/URL][/B]
Code:
[B][SIZE="5"][COLOR="DarkRed"]Preparing Your Windows PC And Magnum X5 for Rooting:[/COLOR][/SIZE][/B]
Extract Downloaded Root Tool Kit to your Windows PC Desktop
Go to Settings >> Backup & Reset >> Factory data Reset in your Lava Iris X5 and Do a factory data Reset and Complete setups after it re-boots
Enable USB Debugging On your Device You can find this option in Settings >>Developer Option >>USB Debugging.
Enable Allow Installation of Apps from Unknown Sources under Settings >> Security >> Unknown Sources also Disable verify apps bellow Unknown Sources
Now Connect your device via USB cable to windows PC and Start installing programs which is provided in tool kit in same order
1.) Adb Driver Installer 2) BRCM_Driver_Package 3.)For Windows x64 Bit/For Windows x32 Bit 4.)VRoot_1.7.8.7753_Setup
Code:
[SIZE="5"][COLOR="DarkRed"][B]Rooting :[/COLOR][/SIZE][/B]
Open installed V-Root Program and Grant USB Debugging Authorization when a pop-up pops in your device Remember to tick always allow option.
When connection is established between V-Root program and your device it will display your device model and Root Button in Opened V-Root Program
If You See Green Colored Root button in V-Root Program Just click it and Wait silently with out touching your device .After some Times Your
Device will reboot (Remember Don't Disconnect USB cable until and Unless V-Root Program show success in your PC )
When you see Success message in PC remove USB Cable and Reboot Your Phone
Now Your Lava Iris X5 is Rooted
Restoring Stock Status/Firmware (Un-Bricking)
Code:
[B][SIZE="5"][COLOR="DarkRed"]Downloading Required Files:[/COLOR][/SIZE][/B]
Download Lava Iris X5 Stock Firmware Version : Lava_x5_S109_20140816
[B][URL="https://docs.google.com/uc?id=0B1Hf9FzDNVqDWFl4NmZDMEMxdG8&export=download"]Click Here to Download[/URL][/B]
Download Lava Iris X5 SW DOWNLOAD TOOL [URL=" https://drive.google.com/uc?id=0B1Hf9FzDNVqDYklib3loRXozcjA&export=download"]Click Here to Download[/URL]
Download Breadcom Driver Package [URL="http://support.moulnisky.com/index.php?dir=Lava/Magnum%20X604/Tools/"]Click Here to Download[/URL]
Code:
[B][SIZE="5"][COLOR="DarkRed"]Installation/Preparation[/COLOR][/SIZE][/B]
Extract all Downloaded package on your Windows PC Desktop
Install Breadcom Driver Package
Open Extracted Lava Magnum X604 SW DOWNLOAD TOOL
Run “vcredist_x86.exe” to install VC Redistributable.
Run Multi Downloader.exe as Administrator
Select “Setting->Configuration” to enter setting dialog.
Click “…” button. Select your image folder. and select the extracted lava iris x5 stock firmware folder
If an up level folder selected, tool will search all image package contained.
And list all packages for your selection.
Check Reset in after download mode
apply these configurations
[B][SIZE="4"]How to download [/SIZE][/B]
1. Click “start” on main GUI to enable download main process.
2. Take off the phone battery, unplug the USB cable (make sure the phone is fully
power off), then connect the USB cable from the phone to the PC, put back the
battery.
3. A user should see that the tool detects the device and start flashing.
4. Unplug the phone once the DIAG color is green. Please don’t unplug a phone if
the color is still in yellow. This will cause an error.
Now Your Device is Restored to Original condition like when it was opened from new box
Read more explanations from read me file Inside Lava Iris X5 SW DOWNLOAD TOOL.zip
Note: If You Are able to Produce Mirror links for Stock firmware and Tools feel Free to create and share it here so that i can add Those mirror Links in op to keep Files alive for Future Users
Credits
V-Root Developers
Sujyot GSM Zone
GSM Hosting
Chain fire
Please Don't say thanks in words Simply press Thanks Button Which is more Meaning full?
The-Immortal.

Awesome !!!
Thanks for your heads up :good:
This device looks gr8 in my opinion !
How is the battery life overall for mid usage ?
Also can we expect custom ROMs like cm11 for this device ?
Thanks in advance

Android0x7 said:
Thanks for your heads up :good:
This device looks gr8 in my opinion !
How is the battery life overall for mid usage ?
Also can we expect custom ROMs like cm11 for this device ?
Thanks in advance
Click to expand...
Click to collapse
Today late night I will post a guide to unbricking + stock firmware with detailed instructions
Expect custom recovery (TWRP and Philz )
Sooner
More response to threads means more development[emoji6]

LAVA IRIS X5 Unrooting
Hlo,
Thanks , i have successfully rooted my lava x5, also please explain the unroot procedure for the same..

Mohit Grover said:
Hlo,
Thanks , i have successfully rooted my lava x5, also please explain the unroot procedure for the same..
Click to expand...
Click to collapse
Instead of saying thanks simply press it there is a button ?
Give me some time I will put custom recovery also ...

Mohit - Pls help decide
Mohit Grover said:
Hlo,
Thanks , i have successfully rooted my lava x5, also please explain the unroot procedure for the same..
Click to expand...
Click to collapse
Hi Mohit,
Please help me decide in buying this phone.
Just let me know how is the screen quality according to u ,
Also hw is the battery backup for mid range use.
Thanks in advance.

Lava iris x5
Android0x7 said:
Hi Mohit,
Please help me decide in buying this phone.
Just let me know how is the screen quality according to u ,
Also hw is the battery backup for mid range use.
Thanks in advance.
Click to expand...
Click to collapse
Hlo Dear,
The phone is looks good and the screen quality is also impressive ( resolution 1280X720 ), the phone is very slim and light weight and but the battery backup is quite low during 3G uses , 8 mp rear camera with dual flash is also impressive and front camera (5 mp) with flash is great for selfies , supports HD recording.
You can play HD videos without using any third party app.
Overall the phone is best in this price range compared to others.
Thanks

Mohit Grover said:
Hlo Dear,
The phone is looks good and the screen quality is also impressive ( resolution 1280X720 ), the phone is very slim and light weight and but the battery backup is quite low during 3G uses , 8 mp rear camera with dual flash is also impressive and front camera (5 mp) with flash is great for selfies , supports HD recording.
You can play HD videos without using any third party app.
Overall the phone is best in this price range compared to others.
Thanks
Click to expand...
Click to collapse
Also please don't forget to mention poor audio quality in headphones .......(till now there is no way to increase headset volume coz of unknown audio configuration and drivers )
This is major point for many uses like me ...
Press Thanks Button If You like My Work & Posts?

Runtime Query
So I got this phone and was browsing for some root options already, in a recent post online I read that the phone has an option to switch to 'ART Runtime' instead of Dalvik. The ART Runtime is fast indeed.
My question is whether, if I use ART Runtime, will it be of any hindrance to the rooting?

joysontpeter said:
So I got this phone and was browsing for some root options already, in a recent post online I read that the phone has an option to switch to 'ART Runtime' instead of Dalvik. The ART Runtime is fast indeed.
My question is whether, if I use ART Runtime, will it be of any hindrance to the rooting?
Click to expand...
Click to collapse
You can always use art with out any hesitation
But in our stock ROM lava has not even provided a single customisation ....so ultimately for time being we have to depend on x-posed framework and modules which is incomparable with art
And also dome 3rd party applications are not fully art compatible so if we need customisation we need to stay in dalvik
If we don't need customisation we can safely stay in Art ...
I hope I cleared your doubt ?
Press Thanks Button If You like My Work & Posts?

Lag.....
My phone lags heavily...... I am wondering if this is a Device specific Error..... Or is it a problem with all the devices...... Will flashing the firmware help......

joysontpeter said:
My phone lags heavily...... I am wondering if this is a Device specific Error..... Or is it a problem with all the devices...... Will flashing the firmware help......
Click to expand...
Click to collapse
Is your device is rooted ?
If yes fallow the guide in bellow mentioned link to de bloat . ..and as per guide clean all junks provided by lava ....this will be definitely reduce lag factor ......
http://forum.xda-developers.com/showthread.php?p=55407805
Press Thanks Button If You like My Work & Posts?

LAVA IRIS X5 unroot
The-Immortal said:
Instead of saying thanks simply press it there is a button ?
Give me some time I will put custom recovery also ...
Click to expand...
Click to collapse
Hi,
I have unrooted my phone using Vroot official english version, which have unroot option also.
Please tell, how do i knw that, my phone is fully unrooted..

Mohit Grover said:
Hi,
I have unrooted my phone using Vroot official english version, which have unroot option also.
Please tell, how do i knw that, my phone is fully unrooted..
Click to expand...
Click to collapse
Hi mohit
In rooting process generally 2 files are copied to system ie su binary to system/xbin
And a root controller application
If you unroot the all will 1st delete su binary and and apk get uninstalled itself
Now install root explorer and check your
system/xbin for file named su if its not present then you are complete unrooted your device
I hope I cleared your doubt
Press Thanks Button If You like My Work & Posts?

Accessibility Service Not Working
The-Immortal said:
Hi mohit
In rooting process generally 2 files are copied to system ie su binary to system/xbin
And a root controller application
If you unroot the all will 1st delete su binary and and apk get uninstalled itself
Now install root explorer and check your
system/xbin for file named su if its not present then you are complete unrooted your device
I hope I cleared your doubt
Press Thanks Button If You like My Work & Posts?
Click to expand...
Click to collapse
Hlo,
During Installing third party Notification app in my X5 , i m unable to activate Accessibility Service any of the third party app as in the Accessibility option only system services are shown not third party. (Screen Shot is attached for your reference.)
please help ...!!!

Mohit Grover said:
Hlo,
During Installing third party Notification app in my X5 , i m unable to activate Accessibility Service any of the third party app as in the Accessibility option only system services are shown not third party. (Screen Shot is attached for your reference.)
please help ...!!!
Click to expand...
Click to collapse
I need a bit more details to help you
Can you tell the name of application ?
Press Thanks Button If You like My Work & Posts?

Accessibility Service Not Working
The-Immortal said:
I need a bit more details to help you
Can you tell the name of application ?
Press Thanks Button If You like My Work & Posts?
Click to expand...
Click to collapse
It's Like Iphone notifications , metro or wp7 notifications etc..
Nothing is working , cant enable to activate this service.

Mohit Grover said:
It's Like Iphone notifications , metro or wp7 notifications etc..
Nothing is working , cant enable to activate this service.
Click to expand...
Click to collapse
OK let me give a try I will let you know
By the way if you rooted heads up notification and hover is working beautifully via x-posed
Press Thanks Button If You like My Work & Posts?

Cyanogenmod
The-Immortal said:
OK let me give a try I will let you know
By the way if you rooted heads up notification and hover is working beautifully via x-posed
Press Thanks Button If You like My Work & Posts?
Click to expand...
Click to collapse
Hello,
My phone goes very slow after installing Themer, Next Launcher or Inspire Launcher, but i tried these launcher with other same config. phones , they works smoothly , tell me , what kind of problem is this.
Or please tell me if any custom recovery and cyanogenmod is available ...

Stock Firmware
Hey Ummm..... I need the Stock Firmware.....