[GUIDE] How To Overclock Samsung Galaxy Ace Plus S7500

[GUIDE] How To Overclock Samsung Galaxy Ace Plus S7500 - Samsung Galaxy Ace Plus S7500

NOTE: I Will Not Be Held Responsible For Any Bricked Devices. Please Use At Your Own Risk.Will Be Fine If You Follow Exact Instructions!
Things you will neeed: (all links below)
1.ROOTED DEVICE
2.Clockworkmod 5.0.0.4.tar
3.Odin v 1.85
4.Update-kernel-Trebon(thanks to mb-14)
5.Rom Toolbox Pro
Steps:
-Transfer update-kernel-trebon to your sd card
-Your device should have clockworkmod 5.5.0.4 installed by default if
not flash with Odin(open Odin and click ''PDA'' and select clockworkmod
5.5.0.4.tar.Turn off your device and boot into download mode by holding the volume
down+home+power keys together.Then press volume up to continue.Connect your phone
to pc by using your usb cable and in the ID:COM section in odin you will notice a yellow/green box pop up,this
means that your device is connected and ready.Press ''start'' in odin and leave to finish,then reboot your device if
not automatically rebooted.)
-Turn on your device into recovery mode by holding the volume down+volume up+power+home keys together
-Navigate in clockworkmod by using the volume up and down keys and select using the home key.Go to ''install zip
from sd card'' and ''choose zip from sd'' and choose update-kernel-trebon.zip.Then reboot your device
-Finally install Rom Toolbox Pro and under performance you will see ''cpu control''and then ''cpu sliders'' where you
change the frequency of the cpu to maximun '1305'
You Will Definitely Feel The Performance Bump In Games!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Clockworkmod 5.5.0.4 - http://search.4shared.com/postDownload/NrzNirXN/clockworkmod_5_5_0_4_2.html
Update-kernel-Trebon - http://search.4shared.com/postDownload/-JiqA7Nm/ace_plus_kernel-_thanks_to_mb-.html
Rom Toolbox Pro - http://www.4shared.com/get/735EkeBg/ROM_Toolbox_Pro_v595.html
Odin v1.58 - http://www.4shared.com/get/74D8ERjO/odin_v185.html
Press ''Thanks'' If I Helped You :good:

NC

hehe lol

Hey cn v over clock using CWM 6.0????
Sent from my GT-S7500 using xda app-developers app

trendchanger said:
Hey cn v over clock using CWM 6.0????
Sent from my GT-S7500 using xda app-developers app
Click to expand...
Click to collapse
I haven't tried using 6.0 but just in case you wanna try it I recommend doing some research first because you never know what can happen.Going back to CWM 5.0.0.4 is a very easy process though,all you have to do is put your phone into download mode and connect to the PC and open odin3 then flash the cwm tar package as PDA and wait for phone to reboot.Good luck with everything man :highfive:

trendchanger said:
Hey cn v over clock using CWM 6.0????
Sent from my GT-S7500 using xda app-developers app
Click to expand...
Click to collapse
overclocking is not related to recovery its a kernel thing :good:
you can overclock your processor with any recovery it can be twrp (in my case)

Hey does this kernel work on any ROM ? and do i need to have the exact CWM version u mentioned up there or i can use a higher version ( im using 6.xxx )

Mad VIbes said:
NOTE: I Will Not Be Held Responsible For Any Bricked Devices. Please Use At Your Own Risk.Will Be Fine If You Follow Exact Instructions!
Things you will neeed: (all links below)
1.ROOTED DEVICE
2.Clockworkmod 5.0.0.4.tar
3.Odin v 1.85
4.Update-kernel-Trebon(thanks to mb-14)
5.Rom Toolbox Pro
Steps:
-Transfer update-kernel-trebon to your sd card
-Your device should have clockworkmod 5.5.0.4 installed by default if
not flash with Odin(open Odin and click ''PDA'' and select clockworkmod
5.5.0.4.tar.Turn off your device and boot into download mode by holding the volume
down+home+power keys together.Then press volume up to continue.Connect your phone
to pc by using your usb cable and in the ID:COM section in odin you will notice a yellow/green box pop up,this
means that your device is connected and ready.Press ''start'' in odin and leave to finish,then reboot your device if
not automatically rebooted.)
-Turn on your device into recovery mode by holding the volume down+volume up+power+home keys together
-Navigate in clockworkmod by using the volume up and down keys and select using the home key.Go to ''install zip
from sd card'' and ''choose zip from sd'' and choose update-kernel-trebon.zip.Then reboot your device
-Finally install Rom Toolbox Pro and under performance you will see ''cpu control''and then ''cpu sliders'' where you can
change the frequency of the cpu to maximun '1305'
You Will Definitely Feel The Performance Bump In Games!
View attachment 2296445
Clockworkmod 5.5.0.4 - http://search.4shared.com/postDownload/NrzNirXN/clockworkmod_5_5_0_4_2.html
Press ''Thanks'' If I Helped You :good:
Click to expand...
Click to collapse
There is already a guide for this...

medo227 said:
Hey does this kernel work on any ROM ? and do i need to have the exact CWM version u mentioned up there or i can use a higher version ( im using 6.xxx )
Click to expand...
Click to collapse
I don't know about the ROM part because i lost the phone but yes it will work for your CWM version also

medo227 said:
Hey does this kernel work on any ROM ? and do i need to have the exact CWM version u mentioned up there or i can use a higher version ( im using 6.xxx )
Click to expand...
Click to collapse
Worked for me on stock 2.3.6 with CWM 6 though

sonyx10mini said:
Worked for me on stock 2.3.6 with CWM 6 though
Click to expand...
Click to collapse
That's good to hear

odin 3.04
omarilzz said:
NC
Click to expand...
Click to collapse
also works on odin v3.04?

massi cuea said:
also works on odin v3.04?
Click to expand...
Click to collapse
Yes it will GL

broken links
Is it just me, or are the download links not working anymore ?

J0hnick said:
Is it just me, or are the download links not working anymore ?
Click to expand...
Click to collapse
Thanks for the notice all are working fine besides odin3, updated as of now

Yes all links are work fine J0hnicki just checked

Thanks for the feedback @sonyx10mini

Wifi won't turn on
Hi,
after flashing update-trebon i can't turn wifi on only say error in settings.
Sry for my English

I tried installing Rom Toolbox Pro, it says I don't have enough free space but I have almost 1GB :-/

Related

[MOD]Extended Power Menu+CRT off Effect+%Battery(ddkp2)

Disclaimer : I am not responsible if you brick your device. Do it in your own risk
This MOD is for deodexed ddkp2....
UPDATE 2 [21/01/2012]
Download the MOD here
CHANGELOG
This MOD has :
1. CRT off animation.
2. Extended power menu without scrolling.
3. 1% Battery icon.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
UPDATE 1[11/01/2012]
Download here
CHANGELOG
-CRT off Animation.
Instructions:
A) Flashing CWM Recovery.......(Rooted users can skip this step)
1. Download universal cf root (credits to amit bagaria)
2. Enter the device into download mode. Power off device then press volume down+home button+power on. You will enter into download mode.
3. Download odin.Open odin in PC.
Make sure that the drivers are installed. Install kies download this
4. Connect mobile to PC.
5. Open pda field in odin and select the .tar file.
6. Click start.
7. Reboot device.
B)Flashing the zip file.....
1. Copy the .zip to your sd card.
2. Enter into CWM recovery mode.
3. Then Flash the zip in CWM.
Done....!!!

clicked thanks for your effort and also for your integrity
cant test as im on kpq.
keep it up though!

@ sirilpta
can u try for crt ON animation like it is ported on galaxy S2???

vishal24387 said:
@ sirilpta
can u try for crt ON animation like it is ported on galaxy S2???
Click to expand...
Click to collapse
For that you want a good developer. Sorry currently i cant. I am learning these all stuffs from basic.
Sent from my GT-I9003

can i use this update with kpq

vibhorsingh said:
can i use this update with kpq
Click to expand...
Click to collapse
You need to be in ddkp2
Sent from my GT-I9003

can i skip flashing the tar file if i am already rooted?
sirilpta said:
Hai everybody.
This is a small CRT mod from a poor noob.
Instructions:
Download thisattachments.xda-developers.com/attachment.php?attachmentid=818982&d=1324062346 (credits to amit bagaria)
Enter the device into download mode. Power off device then press volume down+home button+power on. You will enter into download mode.
Download odin.Open odin in PC.
Make sure that the drivers are installed. Install kies download thisorg.downloadcenter.samsung.com/down...5/20110512115717796/Kies_2.1.1.11124_17_6.exe
Connect mobile to PC.
Open pda field in odin and select the .tar file.
Click start.
Reboot device.
Copy the CRT.zip to your sd card.
Again enter into download mode.
Then Flash the zip in CWM.
Done....!!!
I am not responsible if you brick your device.
Click to expand...
Click to collapse
UPDATE:
It works. In the last step it is recovery mode and not download mode. Rooted users can skip the first step.

rubenroy said:
can i skip flashing the tar file if i am already rooted?
UPDATE:
It works. In the last step it is recovery mode and not download mode. Rooted users can skip the first step.
Click to expand...
Click to collapse
Thanks for pointing that mistake
send from gt-i9003 using android keyboard

This is only the CRT off effect right ?

ybyb said:
This is only the CRT off effect right ?
Click to expand...
Click to collapse
yes.......

it is good for me ..thanks

is this General ?
fit for KPM/KPQ or other versions?

CRT worked on My Galaxy sl..

can u tell me what is crt off animation

ricky455 said:
can u tell me what is crt off animation
Click to expand...
Click to collapse
When you locks your screen the screen turn off in the way as old tv turns off. Search youtube you will find video see it.
send from gt-i9003 using android keyboard

hey dude can u tell me how to deodexed ddkp2 pls reply me

thanks really appriciate
but extended power menu not working ???
using XXKPQ

saraomani said:
thanks really appriciate
but extended power menu not working ???
using XXKPQ
Click to expand...
Click to collapse
Its for deodexed ddkp2
send from gt-i9003 using android keyboard

saraomani said:
thanks really appriciate
but extended power menu not working ???
using XXKPQ
Click to expand...
Click to collapse
forum.xda-developers.com/archive/index.php/t-1169443.html refer this thread and make it your own.
send from gt-i9003 using android keyboard

ricky455 said:
hey dude can u tell me how to deodexed ddkp2 pls reply me
Click to expand...
Click to collapse
There was deodexed ddkp2 by ganesh. But the multiupload link is no more. Try another nethod to deodex by your own.
send from gt-i9003 using android keyboard

[RECOVERY][GT-I9500]CWM 6.0.4.6{For Android 4.4.2!!}{Fully Working}

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
By flashing this recovery you take full responsibility to whatever happens on your device. The developer will NOT be held responsible to whatever happens on your device. Ofcourse, the recovery has been tested but whatever happens on your device will not be held against the developer.
What Is CWM Recovery ?
CWM recovery is a way that enables you to falsh a custom rom , customize your rom and can save you from bad situations. To Be fully in controll of your android device you need a recovery and this is one of them.How To Install CWM Recovery ?
There are 2 methods for installing CWM
1.Method (dd method)
You need root before you continue.
now copy recovery.img from second post to your sd card and :
1.On PC :
Make shure that device is on usb debugging mode.
Plug device and open Terminal/command prompt.
Copy Pasta the Following Commands :
PHP:
adb shell
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p10
make shure that partion is mmcblk0p10 or you will brick device !
now you can reboot to recovery (volume up + home +power) and enjoy CWM 6.0.X.X
2.On Phone :
First Download Terminal Emulator From Play Store.
Plug device and open Terminal apk
Right the Following Commands :
PHP:
su (you need root acess for it )
Then
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p10
make shure that partion is mmcblk0p10 or you will brick device !(guys with fat fingers stay away !)
now you can reboot to recovery (volume up + home +power) and enjoy CWM 6.0.X.X
Second Method Is Via ODIN.
First Download ODIN
Now Download the GT-I9500-CWM-6.0.X.X.tar From Second Post and put it in same directory as odin.
Go To Download Mod (Volume Down +Home+Power) and plug device.
Now in Odin You Will see {added} and a light blue figure on top that means that device has been recognized if you dont get them uninstall devices drivers and retry.
Now click PDA and select GT-I9500-CWM-6.0.X.X.tar And Then Click Start .
After Device reboots Your Done and CWM Is Flashed.
Third method is flashing via recovery .
It does not matter if you are on stock recovery or custom recovery .
First of all download from second post GT-I9500-CWM-6.0.X.X.zip .
Then put it on sdcard .
Then Flash it .
Enjoy your new recovery.Thanks To :
CM Team For CWM recovery .
@Dees_Troy @bigbiff @anders3408 @cybojenix {These Guys Are The Best And I Thank Them for helping me every step in the way and nut thinking that i am a nut job }
Please Hit The Thanks Button If You Like My Work
Follow Me On Twitter SamerDKingCobra
If You Have Any Kind Of Trouble Feel Free To PM Me As I Am Here Almost 19 Hours A Day.

Downloads :
1.GT-I9500-CWM-6.0.4.6.img {For dd Method , Please rename to recovery.img }
2.GT-I9500-CWM-6.0.4.6.tar Build #1 {For Odin}
1.GT-I9500-CWM-6.0.4.5.img {For dd Method , Please rename to recovery.img }
2.GT-I9500-CWM-6.0.4.5.tar Build #1 {For Odin}
3.GT-I9500-CWM-6.0.4.5.zip [For Third Method]
1.GT-I9500-CWM-6.0.4.4.img {For dd Method , Please rename to recovery.img }
2.GT-I9500-CWM-6.0.4.4.tar Build #1 {For Odin}
3.GT-I9500-CWM-6.0.4.4.zip {For third method}
Change Log :
Build #1 Fully Working.Whats To Do In Future Build ?
Enable Touch .
Add OTG Support.FAQ:{Please Read Before Posting}
Q: OMG ! Recovey Not Booting What To Do ?
Alease Dont try entering recovery first time from advanced power menu just do it the hard way
Q:My Device is not getting read by windows ?
A:Uninstall all drivers that you installed for the device .Please Hit The Thanks Button If You Like My Work
Follow Me On Twitter SamerDKingCobra
If You Have Any Kind Of Trouble Feel Free To PM Me As I Am Here Almost 19 Hours A Day.

For later use

Attachment.??

Disturbed™ said:
Attachment.??
Click to expand...
Click to collapse
Second post , sorry i took me long enough because of my bad internet

S.a.M.e.R_d said:
Second post , sorry i took me long enough because of my bad internet
Click to expand...
Click to collapse
Thanks buddy. can you please tell one thing.? what is the speed of taking /restoring backup.? like how much time does it take to take backup.? in TWRP V it hardly take 3-5 min for 2.5GB data.

Disturbed™ said:
Thanks buddy. can you please tell one thing.? what is the speed of taking /restoring backup.? like how much time does it take to take backup.? in TWRP V it hardly take 3-5 min for 2.5GB data.
Click to expand...
Click to collapse
after a precision timing it took me 7. 43 minutes for 5.23 gb of data

Works well, thanks.

will this work on leak 4.3 tq

kishen80 said:
will this work on leak 4.3 tq
Click to expand...
Click to collapse
Yes probably , as i compiled CWM with android 4.3.1 source
Sent from my GT-I9500 using XDA Premium 4 mobile app

kishen80 said:
will this work on leak 4.3 tq
Click to expand...
Click to collapse
After doing wipe data/factpry reset on latest philz touch recovery the phone wont go past the samsung logo..
Something like that wont happen with tbis right?
Sent from my GT-I9500 using xda app-developers app

Degrated Shadow said:
After doing wipe data/factpry reset on latest philz touch recovery the phone wont go past the samsung logo..
Something like that wont happen with tbis right?
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
no its working :good::good::good:

kishen80 said:
no its working :good::good::good:
Click to expand...
Click to collapse
yes i can confirm. i just did a backup and restore. its freaking good. i am sticking to this recovery.
subscribing now.

Hi,
Please make ZIP version to istall from other recovery
Thanks

Do we have a CWM flashable package?

i made a zip but it will not work from first flashh dunno why , i will try and report back.

mateen5997 said:
Hi,
Please make ZIP version to istall from other recovery
Thanks
Click to expand...
Click to collapse
rl421403 said:
Do we have a CWM flashable package?
Click to expand...
Click to collapse
Done Check Second Post.

S.a.M.e.R_d said:
Done Check Second Post.
Click to expand...
Click to collapse
Thanks. Just grabbed.
Sent from my Galaxy S4

S.a.M.e.R_d said:
Done Check Second Post.
Click to expand...
Click to collapse
Thanks

Hi Samered, cwm file zip is corrupted, please make another one, thanks
Sent from my GT-I9500 using XDA Premium 4 mobile app

Updated [CWM]+[Root]Samsung Galaxy s duos 2 s7582

The Project is Closed no More Updates.
Because i sold the S7582
 WARNING
This will void your warranty, so do at your own RISK
Note:
if u having problem entering the the stock recovery all u have to do is
1-Go to your computer and open odin
2-Put your phone into download mode
3-Flash the CWM and while flashing Press the home Button and Volume Up
Until U find Your self at CWM
All this Problems will be fixed in the next Build
Requirements:
- USB driver
- Odin 3.07
- Root file UPDATE-SuperSU-v1.34.zip
- Recovery CWM
Install Clockworkmod Recovery and root Guide
- Install USB driver
- Connect your phone as MTP and copy on Phone memory the UPDATE-SuperSU-v1.34.zip file ( without unzip it)
- Remove your phone
- Extract file recovery.tar.md5 from Recovery CWM in your desktop
- Turn off your S7582
- Press and hold Volume DOWN + Home + Power until you can read a Warning screen and press Volume UP to continue
- Connect your phone to pc and wait for driver installing...
- Open Odin 3.07 and the ID:COM should turn blue
- Untick Auto Reboot and F. Reset Time
- Click on PDA and select file recovery.tar.md5
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Press Start button
- When you read PASS! unplug the usb cable
- Press and hold Volume UP + Home + Power until screen turn off
- Release only Power button and you are on CWM Recovery...
- Select (use Volume up/down and select with Power button) install zip -> choose zip from internal sdcard-> 0/
- Select the Root zip and Yes - Install ..
- After all is done select reboot system now
ScreenShot
Note:
if u having problem entering the CWM all u have to do is
1-Go to your computer and open odin
2-Put your phone into download mode
3-Flash the CWM and while flashing Press the home Button and Volume Up
Until U find Your self at CWM
All this Problems will be fixed in the next Build
Sorry But Iam Very Busy This Days

Couldn't you at least mention @djcliccone. Seeing as you copied his post almost word for word and are using the same files he posted in his thread for the Galaxy Trend Duos S7580 here [Guide][Root+CWM] Samsung Trend plus GT-S7580

hi
thanks a lot brother....:good::good:

Will this thing work on Galaxy S duos S7562?
Sent from my C1904 using XDA Premium 4 mobile app

wow
wow, so thank you for the work and initiative.....this is awesome

No u can't Use this CWM for s dous 1
If u want a cwm for your s dous search in google
Sent from my GT-S7582 using xda app-developers app

can anybody build a flashable zip file for rooting galaxy s duos 2...?

I put a one up in the post
U can use it
Sent from my GT-S7582 using xda app-developers app

bootanimatio
Can you guys start making cool bootanimations for this phone.....looking forward guys......can't wait to see your masterpiece to give this phone even cooler...

It requires a pc... i need just a simple flashable zip ... :thumbup:

This cwm does not work after odin flash.

How come this CWM is working properly everyone test without any problems
Sent from my GT-S7582 using xda app-developers app

so good

I flashed cwm,and root phone,but,I tried again to enter cwm,to beckup ROm,but there was original cwm.(blue colour).

Try to reflash the cwm bro
And give me the feedback
Sent from my GT-S7582 using xda app-developers app

Perfect! Both CWM Recovery and Root work fine (Stock ROM S7582XXUANA2)

Thanks for sharing.

hey bro,this new CWM worked on s duos but cannot restore the backup i created due to an error......"cannot mount system"...then my phone restarts and unable to boot..I actually reflashed my stock rom via odin...please help .....

My phone reverts to stock recovery as I reboot.
Anybody out there with any fix...
Sent from my GT-P3100 using XDA Premium 4 mobile app

Just re flash the cwm again
Sent from my GT-S7582 using xda app-developers app

[GUIDE][UPDATE] How to root and install CWM for Galaxy V SM-G313HZ

are this tutorial really work. i want to try it but i dont know how to unbrick this device when the tutorial doesnt work out.

Lemon_Lime`s said:
are this tutorial really work. i want to try it but i dont know how to unbrick this device when the tutorial doesnt work out.
Click to expand...
Click to collapse
forry for the late reply..
ofcourse this tutorial is really works. look at the screenshot.

What are the changes in build 2? Backup/restore working fine?

cleverior.ipul said:
forry for the late reply..
ofcourse this tutorial is really works. look at the screenshot.
Click to expand...
Click to collapse
thanks for reply .. i will try this out ..

adriansticoid said:
What are the changes in build 2? Backup/restore working fine?
Click to expand...
Click to collapse
fix resolution of CWM. Backup/restore also working fine. I've tested.

Some of the things I noticed:
1. Home button is functioning the same as volume buttons. I think it should function like the power button to select items.
2. White screen when entering recovery.
3. At the bottom it says warning about context files?
4. When rebooting it says root possibly lost. I think it should be rebooted once reboot system is selected.
Maybe it's just me because I got used to CWM in Galaxy Y. Anyway, huge thanks to you. I hope to see more for this device like custom ROMs, kernels, etc. Goodluck.

adriansticoid said:
Some of the things I noticed:
1. Home button is functioning the same as volume buttons. I think it should function like the power button to select items.
2. White screen when entering recovery.
3. At the bottom it says warning about context files?
4. When rebooting it says root possibly lost. I think it should be rebooted once reboot system is selected.
Maybe it's just me because I got used to CWM in Galaxy Y. Anyway, huge thanks to you. I hope to see more for this device like custom ROMs, kernels, etc. Goodluck.
Click to expand...
Click to collapse
1. Maybe will be fixed on the build.
2. I think that isn't big problem.
3. And this is also not big problem.
4. Maybe will be fixed on the build.
Galaxy Y Gen 1 or 2 ?

cleverior.ipul said:
1. Maybe will be fixed on the build.
2. I think that isn't big problem.
3. And this is also not big problem.
4. Maybe will be fixed on the build.
Galaxy Y Gen 1 or 2 ?
Click to expand...
Click to collapse
It's GT-S5360 so I think it's gen 1. It is now sold and I bought a Galaxy V. The CWM in Galaxy Y is almost the same as Galaxy Pocket. I hope there are other devs who also have this device.

This actually works! Too bad it can't be used with Internal Storage...
But using wih sdcard and CWM magically works like charm.. Can mount everything.. Great job dev!

adriansticoid said:
It's GT-S5360 so I think it's gen 1. It is now sold and I bought a Galaxy V. The CWM in Galaxy Y is almost the same as Galaxy Pocket. I hope there are other devs who also have this device.
Click to expand...
Click to collapse
Android version of galaxy y gen 1 is different than galaxy v. Version of recovery also different.
Little Zed said:
This actually works! Too bad it can't be used with Internal Storage...
But using wih sdcard and CWM magically works like charm.. Can mount everything.. Great job dev!
Click to expand...
Click to collapse
good to hear that. please hit the thanks button

OLD Version
CWM 6.0.3.7 Build #2
Changelog :
Fix resolution CWM
Link :
CWM_Recovery_build2.zip (odin version)
[URL="http://www.mediafire.com/download/uh7u9tnh6hc8hre/zz_CWM_Vivalto_Build#2.zip"]zz_CWM_Vivalto_Build#2 (flashable version)[/URL]
CWM 6.0.3.7 Build #1
Changelog :
First build
Link :
CWM_Recovery_v6.0.3.7_Vivalto.zip

cwm updated

Can I flash the build3 using Flashify or Rashr? Or can you make the update flashable? Sorry for the request. I don't have PC. And for some physical problems, I can't go to a computer shop. Thanks.

adriansticoid said:
Can I flash the build3 using Flashify or Rashr? Or can you make the update flashable? Sorry for the request. I don't have PC. And for some physical problems, I can't go to a computer shop. Thanks.
Click to expand...
Click to collapse
here bro

This method worked perfectly to root my Samsung Galaxy Ace 4 Lte (SM-G313ML)
Thanks for sharing it!

garyo said:
This method worked perfectly to root my Samsung Galaxy Ace 4 Lte (SM-G313ML)
Thanks for sharing it!
Click to expand...
Click to collapse
u're welcome. glad to hear that. and dont forget to read my signature.. hehehe

i do as your guide.but my phone can't flash zip supersu v1.4.help me please.my phone is sm-g313hz
---------- Post added at 07:23 AM ---------- Previous post was at 07:12 AM ----------
https://lh5.googleusercontent.com/-.../EGSoSIEbIAk/w769-h577-no/20150221_071533.jpg
https://lh4.googleusercontent.com/-.../B6WUa4XlPu4/w433-h577-no/20150221_071422.jpg
https://lh4.googleusercontent.com/-.../DuQBg0dWOTg/w769-h577-no/20150221_071525.jpg

danbin said:
i do as your guide.but my phone can't flash zip supersu v1.4.help me please.my phone is sm-g313hz
---------- Post added at 07:23 AM ---------- Previous post was at 07:12 AM ----------
https://lh5.googleusercontent.com/-.../EGSoSIEbIAk/w769-h577-no/20150221_071533.jpg
https://lh4.googleusercontent.com/-.../B6WUa4XlPu4/w433-h577-no/20150221_071422.jpg
https://lh4.googleusercontent.com/-.../DuQBg0dWOTg/w769-h577-no/20150221_071525.jpg
Click to expand...
Click to collapse
that is stock recovery. not CWM. try to reflash ur phone to stockrom thru odin and reflash cwm/twrp.

can you send link to me CWM/twrp?because i do as your guide.but it can't flash.thanks

Installing twrp and rooting the sm-t116 (tab 3 lite 7.0 3g)

IM NOT RESPONSIBLE IF YOU BRICK YOUR TAB OR DECIDE TO BE CARELESS OR CREATE A CYCLONE... you know the drill.
HOW TO ROOT SM-T116 TAB 3 LITE 7.0 3G VOYAGE-XX ( Galaxy Tab 3 Lite VE (3G) (SM-T116 ))
After searching for over a month on how to root/install twrp all i cound find were instructions for the SM-T110/1...
if thread already exists pls notify
N.B I TAKE NO CREDIT FOR THIS RECOVERY IN ANYWAY
I am writting to help fellow SM-T116 owners... Since ive been searching for a long time.... I believe there isnt a guide to root this Tab yet.
- N.B MAKE SURE you device's code name is goyave or goyave3g
1. Download the twrp recovery here
- download the recovery in .tar format...
- you will upgrade to v3 manually.
2. Download Odin v3.10.* here
-> copy them to a place you know on ur pc such as Desktop
3. Boot your Tab 3 lite to download mode by: pressing "power + home + vol down"
-> believing all your drivers are installed correctly
3.1 open Odin*.exe ,
3.2 connect your tab and press volume up...
-> at this stage Odin should recognise your device
on the ID:COM section like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. UNTICK AUTO REBOOT or you wont be able to enter recovery
5. Tap pn AP and go to the recovery you downloaded.
select it
6. Press on Start to begin the flashing process
-> After Odin flashes the recovery it will tell you PASS!
7
7.1. Preas and hold POWER + VOLUME DOWN
7.2. when the screen goes black change and hold HOME + VOLUME UP
Now you will enter TWRP... stage 1 done.
rooting on post #2:good:

Now TWRP is functional... Time to root.
1. Download Chainfire's SuperSu flashable zip here
-> and thanking is not a crime.
2. Reboot to recovery...
ALLOW TWRP TO MODIFY THE SYSTEM PARTITION
3.1. Select install
3.2. navigate to your supersu zip
/sdcard/* or /extsdcard/*
-> when you are at the folder where your zip is it will be on the dialog on the right.
4.1. select it
4.2. swipe to confirm
4.3. select wipe cache/dalvik and reboot...
Now you have a Custom Recovery and you are rooted... Doors open.
Becarefull to not to open the wrong doors 
THE PEOPLE WHO MADE THIS POSSIBLE
CREDIT GOES TO:
BIG THANKS TO TeamWin - TWRP FOR THE AWESOME RECOVERY AND
CHAINFIRE for the awesome supersu
SAMSUNG FOR Odin and Demostration Image
THATS IT...!!!!!!!!!!!!!!!!!!!!!!!!!!
will upload deodexed and zipalign rom soon.

Very nice !
:laugh::laugh::laugh:

This works for 116NY too xD

hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?

I am new with Android. Please, can you describe step by step process

peter6206 said:
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
Click to expand...
Click to collapse
Which part fails bro cause a more detailed procedure is a video right

diana-TF said:
I am new with Android. Please, can you describe step by step process
Click to expand...
Click to collapse
Ill add numbering then...
I wrote every step 1 by 1.
U r probably comfused cause there aren't any numbering as to what to do first.

hi...Replies to Android 4.4.4؟؟؟؟؟

h.azara said:
hi...Replies to Android 4.4.4؟؟؟؟؟
Click to expand...
Click to collapse
Whatsup

Can you please post a link for custom rom

Ponie123 said:
Can you please post a link for custom rom
Click to expand...
Click to collapse
Custom Rom like??

nhlalukoG said:
Custom Rom like??
Click to expand...
Click to collapse
Like CYANOGEN or Pac man

Lol they r built bro...
N i guess no one has built it...

peter6206 said:
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
Click to expand...
Click to collapse
i will help you,
1: install kingoroot on your pc
2:Enable USB debugging
3:connect your phone to pc wait for processing
4:when 99% your phone automatically restarted, do not put off the usb cable when it complete
5:hope your phone will b e rooted

I have this tab as above, it is locked(programmed) using an administrative app named Cellwe EMM. Basically i cannot download anything on this tab with neither usb nor sdcard including the internet. All i have to do to get rid of this security is wipe using custom recovery. When i get the tab in download mode it has this MDM DOWNLOAD BLOCK which block me from flashing and installing custom recovery in this tab. My only hope is if i can create an update.zip for twrp or cwm to be installed in this tab using stock recovery. This is where i need help,can someone create this for me or help me with a guide to do this

Adebayo0437 said:
I have this tab as above, it is locked(programmed) using an administrative app named Cellwe EMM. Basically i cannot download anything on this tab with neither usb nor sdcard including the internet. All i have to do to get rid of this security is wipe using custom recovery. When i get the tab in download mode it has this MDM DOWNLOAD BLOCK which block me from flashing and installing custom recovery in this tab. My only hope is if i can create an update.zip for twrp or cwm to be installed in this tab using stock recovery. This is where i need help,can someone create this for me or help me with a guide to do this
Click to expand...
Click to collapse
Hahaha not possible... the update.zip need to be signed by Samsung specifically...
Unless you get a modified stock recovery which needs to be flashed via Odin...

Ok

Rushaan n said:
Ok
Click to expand...
Click to collapse
Does it have "oem unlock" on developer settings??

nhlalukoG said:
Does it have "oem unlock" on developer settings??
Click to expand...
Click to collapse
Deleted

Database Info

welcome