I am the developer of Light Manager. It is an app to configure notification LED color and its flashing frequency for different notification types.
I created this thread to gather more comments and compatibility issues about Light Manager on Samsung Galaxy Note 3. If it is not working accordingly, I would consider getting a Note 3 device for testing. I would like to make it compatible with Note 3.
For more information, you may go to the original thread at Samsung Galaxy S IIII section at:
http://forum.xda-developers.com/showthread.php?t=1735331
mckoo said:
I am the developer of Light Manager. It is an app to configure notification LED color and its flashing frequency for different notification types.
I created this thread to gather more comments and compatibility issues about Light Manager on Samsung Galaxy Note 3. If it is not working accordingly, I would consider getting a Note 3 device for testing. I would like to make it compatible with Note 3.
For more information, you may go to the original thread at Samsung Galaxy S IIII section at:
http://forum.xda-developers.com/showthread.php?t=1735331
Click to expand...
Click to collapse
First of all - thank you for your app, using it for a long time!
As for my usage - everything is working fine on my N3 Octa
Thanks, seems to be working perfectly.
Sent from my SM-N9005 using Tapatalk 4
not working for me.
have checked 'allow access to notifications'
anything else I should check?
N9005 here.
Working perfectly on my N9000 Octa. Thanks for a wonderful app
Sent from my SM-N900 using XDA Premium 4 mobile app
LemonPowerForce said:
not working for me.
have checked 'allow access to notifications'
anything else I should check?
N9005 here.
Click to expand...
Click to collapse
What is not working for you? Not even the missed call and SMS notification?
Go to Settings > Display > LED indicator > and make sure "Notifications" is checked.
ah, scratch that, I'm an idiot.
Tried it and its working on my N3, thanks
Thanks
Hello !
Thanks for your app, it work fine and your app is GREAT ! Hope you continue like that
It works for me one notification at a time.
If another text or notification come in they all stop.
I think what mckoo wants to know it's the color reproduction! my impression: same deviations as with the grey note 2, too much green!
Sent from my SM-N9005 using XDA Premium 4 mobile app
xManMythLegend said:
It works for me one notification at a time.
If another text or notification come in they all stop.
Click to expand...
Click to collapse
Are you using stock ROM stock kernel?
TML1504 said:
I think what mckoo wants to know it's the color reproduction! my impression: same deviations as with the grey note 2, too much green!
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You mean the color reproduction for note 3 is same as note 2? For note 2, I created an one-click button to set hex color code specifically for note 2 device.
mckoo said:
You mean the color reproduction for note 3 is same as note 2? For note 2, I created an one-click button to set hex color code specifically for note 2 device.
Click to expand...
Click to collapse
i know this button, as i had a note2 for about one year, and used your app daily! i think the same button (custom color codes) will do it for note3 as well! maybe some values are a little different, but this should be figured out easily! if you want, i can test some values for you and report back!
mckoo said:
Are you using stock ROM stock kernel?
Click to expand...
Click to collapse
Yes all stock.
Sent from my SM-N900T using Tapatalk 2
TML1504 said:
i know this button, as i had a note2 for about one year, and used your app daily! i think the same button (custom color codes) will do it for note3 as well! maybe some values are a little different, but this should be figured out easily! if you want, i can test some values for you and report back!
Click to expand...
Click to collapse
It would be great if you can help to figure out the color code. I will create a hex color code setting button like note 2 for note 3.
xManMythLegend said:
Yes all stock.
Sent from my SM-N900T using Tapatalk 2
Click to expand...
Click to collapse
Seems like you are using T-Mobile US variant. Perhaps the firmware handles notification differently.
How about you try changing the operating mode to either alternating mode / normal mode? See which mode is working for you?
mckoo said:
Seems like you are using T-Mobile US variant. Perhaps the firmware handles notification differently.
How about you try changing the operating mode to either alternating mode / normal mode? See which mode is working for you?
Click to expand...
Click to collapse
T-Mobile note 3 here as well and it is also not working, unfortunately. I am also stock everything, but I do have app settings and wanam installed with the xposed framework. **As I was writing this I decided to test the alternating mode and bada bing, it's working correctly now. Thanks for the app!
I downloaded this about a week ago for my n9005. As it wasn't meant to be compatible I was surprised that everything worked! Thank you for such a great app.
Back when I had a Nokia n900 you could customize the led's but you could also set a priortity, so if a missed call came in after a message, it would flash the colour of the missed call as that was a higher priority. Is this possible to do on android?
kaos_king said:
I downloaded this about a week ago for my n9005. As it wasn't meant to be compatible I was surprised that everything worked! Thank you for such a great app.
Back when I had a Nokia n900 you could customize the led's but you could also set a priortity, so if a missed call came in after a message, it would flash the colour of the missed call as that was a higher priority. Is this possible to do on android?
Click to expand...
Click to collapse
Perhaps you can try changing operating mode to "Alternating Mode". That will alternate the LED color for multiple notifications. With this, I guess priority is not necessary. I'm just trying to make things simple, adding priority will just add more settings which makes Light Manager not user friendly.
Related
Been following the dev over on his blog that makes Light Flow. When the USA version of the SGS3 came out, it busted Light Fow (you can read the blog for full details). He just pushed version 3.0.5 to the market that for root users, should work all except flashing LED (except for red, blue). So, if your not rooted, it still will not work.
YAY great news!
Just saw this in the play store ha've you tried it yet?
Sent from my SCH-I535 using xda premium
Yea, its a bit glitchy still. I wouldnt say its fixed 100% yet. But its usable for text messages and missed calls etc.
trafalger888 said:
Just saw this in the play store ha've you tried it yet?
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
using it now. done several tests and all has worked so far for me. my colors are showing correct. my notifications are all firing. it cycles through multiple notifications (like when you get a MMS, email and missed call) from the tests I have done. I had some initial issues (lag) when I first installed it, but all seems fine now.
before it was 100% unusable, you can read why in the blog, now it is like 98% usable. The big bummer is that only like red and blue can flash, every other color has to be solid. But the dev claims with LED, this has minimal to no battery effect - which I kind of find hard to believe.
So I guess we get to talk about this in quadruplicate in each one of the carrier forums?
I hope Samsung gets around to explaining the non-stardard notification system they decided to use in the US version.
Anyhow, seems to be working fairly well for me. The one thing I noticed is that, with some notifications, it initially comes on as a different color than chosen in light flow, but then a split second later, the light flow color comes on and stays.
Is it first using the color baked in to the app and then light flow is taking over quickly after that? Anyone else noticed that? Any way to have that not happen (though it's not in a big deal).
lexluthor said:
So I guess we get to talk about this in quadruplicate in each one of the carrier forums?
I hope Samsung gets around to explaining the non-stardard notification system they decided to use in the US version.
Anyhow, seems to be working fairly well for me. The one thing I noticed is that, with some notifications, it initially comes on as a different color than chosen in light flow, but then a split second later, the light flow color comes on and stays.
Is it first using the color baked in to the app and then light flow is taking over quickly after that? Anyone else noticed that? Any way to have that not happen (though it's not in a big deal).
Click to expand...
Click to collapse
Yes I now admit I have seen this glitch also but I had not yet determined if it is as you say it or if it was firing the last color used then firing your desired color. I think your logic is the issue.
lexluthor said:
So I guess we get to talk about this in quadruplicate in each one of the carrier forums?
I hope Samsung gets around to explaining the non-stardard notification system they decided to use in the US version.
Anyhow, seems to be working fairly well for me. The one thing I noticed is that, with some notifications, it initially comes on as a different color than chosen in light flow, but then a split second later, the light flow color comes on and stays.
Is it first using the color baked in to the app and then light flow is taking over quickly after that? Anyone else noticed that? Any way to have that not happen (though it's not in a big deal).
Click to expand...
Click to collapse
Make sure you switch off all the "led indicators" in the phone settings otherwise it'll be fighting against the default notifications.
andrewpmoore said:
Make sure you switch off all the "led indicators" in the phone settings otherwise it'll be fighting against the default notifications.
Click to expand...
Click to collapse
Do you mean the 3 items I have indeed led indicators in phone settings or should I also go into each app that i have light flow notifications set up for and disable any options for led notifications that each app might have?
lexluthor said:
Do you mean the 3 items I have indeed led indicators in phone settings or should I also go into each app that i have light flow notifications set up for and disable any options for led notifications that each app might have?
Click to expand...
Click to collapse
I only did the 3 led indicator items in phone settings, I did not go into each individual app and turn off notifications and so I have no redundant notifications. We give Light Flow the power to take over those notifications.
Lock-N-Load said:
But the dev claims with LED, this has minimal to no battery effect - which I kind of find hard to believe.
Click to expand...
Click to collapse
read up on how much power a single LED consumes and you will believe it just fine.
Sent from my SCH-R530U using Tapatalk 2
I'm still not getting light flow to work. When I put my phone to sleep I am getting a green light that stays on. The only thing I am using light flow for is to turn off my notification light during "sleep mode" at select times.
Has anyone else had this issue?? How'd ya fix it of you did??
Sent from my SCH-I535 using xda premium
New to the sgs3 guys. light flow worked great on my nexus an not gonna root quite yet. Is there any other ways to control the led for text messages?
Sent from my SCH-I535 using xda app-developers app
I figured out how to get rid of the green light staying on. Even though you grant light flow root access you need to check the box that asks for root access in the app as well.
Working find so far!!!
Sent from my SCH-I535 using xda premium
I wonder why flashing LED support is limited to only 2 colors.
cgulliver said:
I wonder why flashing LED support is limited to only 2 colors.
Click to expand...
Click to collapse
It's not by choice. Getting the LED to blink with consistency was a major challenge. So the blinking was removed (for now - but Andrew the dev is amazing so he will get it without too much more delay).
However there are a few inherent bits of code in the OS to make the LED blink for certain colors/patterns and those are the limited blinks you can pick.
I was a beta tester so I watched how this progressed.
Sent from my SCH-I535 using Tapatalk 2
I thought this app was all good for me, but it's still not working. I can't get the sleep mode to work. I set it up to turn off all notifications at night but they're still coming on.
I cannot get this to work no matter what I try!!!
Is blue the only color we can get to pulse, or will more come over time?
What Can You Do?
I've never used Light Flow before but have been considering purchasing the app. Can anyone tell me what setup they use Light Flow (ie which color for which)?
I guess I'm asking for someone to pitch me the product! I'm interested in it but hesitant on what LED notifications I would use besides the defaults.
Thanks!
SAMSUNG GALAXY S III - I9300
SynergyROM v1.6
Edit
Sent from my SCH-I535 using Tapatalk 2
Hi guys.
I am going to list the common issues with my i9500.
Got it 2 weeks back and have been testing it thoroughly. Currently on latest ME1 firmware.
1.Overheating
2.Camera Crash
2b. New crash issue: open camera, go to settings, press the mic (sound) button and the camera crashes.
3.Phone turns off all by itself.
(Hapenned twice in two weeks)
4.When the phone is turned on again, the battery levels jumps down to 10-15 percent less of what it was before. It is also displayed in the settings battery status graph.
5.When the volume is set to max during a call through earpiece, the slight vibration made because of the sound emission is felt on the back of the device (in a cheap way) every s4 has this issue.
6.Launcher redraw (Even after updated ME1 firmware but its improved and only seen when doing heavy muktitasking)
7. Screen smearing issue.
8. Slight pinkinsh/purple tone on the lower right half of the screen when the brightness is set to lowest.
9. Flash light less bright than other phones eg nexus or s3
10. Camera Lag when opening
10a. Shutter lag when taking photos
11. Gallery lag when opening
12. Dialer lag
13. Contact app lag
14. When the keyboard is popped out on say a white web page, the screen does a slight brightness adjustment that it almost feels like a screen flicker on low brightness. Then it changes colour tone from reddish to greenish.
15. Notification bar ocassionally stutters when pulled down or pushed back up.
Whoever gets any of these issues please keep confirming or adding any more issues I missed. All these issues are currently present in alot of brand new s4 units worldwide.
Erm, I have come across any of these. Try this to reduce 'lag'
- Open S voice and go in to the S Voice settings and untick 'open via home button'
- Go to developer options and change all the animation/window/transition scales to 0.5x
See how that works. Also exchange it for a different S4 if you have those problems. Are you rooted? If so try stock rooted and see if that was a software issue
~ Taylor_Swift
Sent from my Samsung Galaxy Note II GT-N7100 using XDA Premium HD
Shouldn't this thread be called "problems with my s4" I have none of these issues to date.
Oops sorry just realised you are talking about the i9500, if that makes any difference.
Sent from my GT-I9505 using Tapatalk 2
The only problem i have so far is camera crash sometimes. Try to update your firmware to ME1.
Vadrieldur said:
The only problem i have so far is camera crash sometimes. Try to update your firmware to ME1.
Click to expand...
Click to collapse
Cant wait too do that but dont wanna root ME1 has resolved these issues for good.
Sent from my Galaxy S4 .
jim1h said:
Shouldn't this thread be called "problems with my s4" I have none of these issues to date.
Oops sorry just realised you are talking about the i9500, if that makes any difference.
Click to expand...
Click to collapse
Yes, problems numbered 1,2,3,6,7,8,10,11,12 and 13 are very common here on xda. I wanted to summarize everything in a single thread.
Sent from my GT-I9500 using xda premium
On my i9505 is only 6 and 7.
I'm on the fw which the phone came with (MDM).
Waiting for the next BTU release to flash.
plasmastate said:
Hi guys.
I am going to list the common issues with my i9500.
Got it 2 weeks back and have been testing it thoroughly. Currently on latest ME1 firmware.
1.Overheating
2.Camera Crash
7. Screen smearing issue
10. Camera Lag when opening
11. Gallery lag when opening
Whoever gets any of these issues please keep confirming or adding any more issues I missed. All these issues are currently present in alot of brand new s4 units worldwide.
Click to expand...
Click to collapse
In the quote section is the list of the issues I'm encountering on my S4 9500 vers. I have to mention that my phone reboots when the camera crashes. Another issue would be the battery life (10-12 hrs with 2 hrs screen time on).
I believe all of these issues are easily solvable via a firmware update. Hurry up Sammy.
G-XtremE said:
In the quote section is the list of the issues I'm encountering on my S4 9500 vers. I have to mention that my phone reboots when the camera crashes. Another issue would be the battery life (10-12 hrs with 2 hrs screen time on).
I believe all of these issues are easily solvable via a firmware update. Hurry up Sammy.
Click to expand...
Click to collapse
Camera crash temporary solution - android booster works for me till now nt a single crash
Sent from my Galaxy S4 .
Biggest problem of them all http://forum.xda-developers.com/showthread.php?t=2258831
Custom Stock Rom 5.0
Brilliantly Stock
And there's this new problem I'm experiencing. ....it's like...whenever the keyboard is on and when I pull down the notification bar. .it feels a bit laggy.
Sent from my GT-I9500 using xda premium
plasmastate said:
Hi guys.
I am going to list the common issues with my i9500.
Got it 2 weeks back and have been testing it thoroughly. Currently on latest ME1 firmware.
1.Overheating
2.Camera Crash
3.Phone turns off all by itself.
(Hapenned twice in two weeks)
4.When I turn the phone on again, the battery levels jumps down to 10-15 percent less of what it was before. It is also displayed in the settings battery status graph.
5.When the volume is set to max during a call through earpiece, the slight vibration made because of the sound emission is felt on the back of the device (in a cheap way) every s4 has this issue.
6.Launcher redraw (Even after updated ME1 firmware but its improved)
7. Screen smearing issue
8. Slight pinkinsh/purple tone on the lower right half of the screen when the brightness is set to lowest.
9. Flash light less bright than other phones eg nexus or s3
10. Camera Lag when opening
10a. Shutter lag when taking photos
11. Gallery lag when opening
12. Dialer lag
13. Contact app lag
14. When the keyboard is popped out on say a white web page, the screen does a slight brightness adjustment that it almost feels like a screen flicker on low brightness. Then it changes colour tone from reddish to greenish.
Whoever gets any of these issues please keep confirming or adding any more issues I missed. All these issues are currently present in alot of brand new s4 units worldwide.
Click to expand...
Click to collapse
I have every issue you stated and alot of ppl do and then just dont pay attention to it. Then they deny the fact that it exists.... if I'm on a youtube vid aswell and I decide to search for a video while I'm already watching one, you can see the video change from a red to green tint
Sent from my GT-I9500 using xda app-developers app
10 million handsets already sold guyzz I feel we r the only unlucky ones wid these issues :banghead:
Sent from my Galaxy S4 .
Another issue
Hi,
I have a prooblem where my sd card keep unmounting itself... dont know if its the sd card... going to buy a new one to try with.
but meanwhile, anyone else see this?
BR
I can confirm all issues I'm thinking of returning galaxy s4 for a refund
jithendra194 said:
And there's this new problem I'm experiencing. ....it's like...whenever the keyboard is on and when I pull down the notification bar. .it feels a bit laggy.
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
+1. I can confirm. This is exactly what happens. Running stock ME1 firmware.
Sent from my GT-I9500 using xda premium
EuroPK said:
Hi,
I have a prooblem where my sd card keep unmounting itself... dont know if its the sd card... going to buy a new one to try with.
but meanwhile, anyone else see this?
BR
Click to expand...
Click to collapse
I have no issues whatso ever with sd card unmounting. Running i9500.
Sent from my GT-I9500 using xda premium
plasmastate said:
+1. I can confirm. This is exactly what happens. Running stock ME1 firmware.
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
No matter what firmware I flash...this bug exists.
Sent from my GT-I9500 using xda premium
probably update is just around the corner
Sent from the State where marijuana is not illegal
chris_marsh said:
probably update is just around the corner
Sent from the State where marijuana is not illegal
Click to expand...
Click to collapse
Especially since the last update was about two weeks ago.
Hi all, never owned a nexus phone previously but just ordered from play N5 - coming from S4.
Just got a quick question... Is the vibration intensity adjustable on the N5 or even LG G2 like it is on my S4?
Thanks in advance
Sent from my GT-I9505 using Tapatalk
mchu6am4 said:
Hi all, never owned a nexus phone previously but just ordered from play N5 - coming from S4.
Just got a quick question... Is the vibration intensity adjustable on the N5 or even LG G2 like it is on my S4?
Thanks in advance
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
im sure it is, and if it isnt, there should be some hack or app to fix it
I hope there is... I got rid off HTC one due to lack of this feature!
Sent from my GT-I9505 using Tapatalk
mchu6am4 said:
I hope there is... I got rid off HTC one due to lack of this feature!
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Hmmm... played around with it all night and can't find the Vibration intensity setting anywhere. There is also no settings for displaying battery percentage.
Looks like i may have been a bit spoiled with touch wiz.
pkny said:
Hmmm... played around with it all night and can't find the Vibration intensity setting anywhere. There is also no settings for displaying battery percentage.
Looks like i may have been a bit spoiled with touch wiz.
Click to expand...
Click to collapse
Download a custom kernel that support it and install trickster on Google play to control it.
And there's a app call battery widget reborn that will show your a battery percent on the top left. This phone hasn't even been release a week yet.
Lol but no touch wiz did not spoiled you the nexus 5 support will suck you in if you like customizing your android.
Sent from my Nexus 5 using XDA Premium 4 mobile app
mchu6am4 said:
Is the vibration intensity adjustable on the N5 or even LG G2 like it is on my S4?
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
For G2, yes the vibration intensity is adjustable. I'm waiting for N5 in the mail, but my N4 wasn't adjustible.
On the Nexus 5 the intensity isnt adjustable. On my Nexus 5 the vibration is really low...
kswiss86 said:
On the Nexus 5 the intensity isnt adjustable. On my Nexus 5 the vibration is really low...
Click to expand...
Click to collapse
the intensity is adjustable...at least for the haptic feedback when typing
I have a mushy annoying vibration when typing...especially when typing fast.
I did RMA my Phone and the new phone is allready on the way to me (still have the old one)
After i did RMA i found out that the haptic feedback is adjustable....i put it on 1ms for typing....now it is less annoying and feels kinda normal....but not as crisp as it should imho.
I will receive the new one tomorrow and will compare them......who knows how the new phone will be (dust, dead pixels).....if there is anything like that i´ll keep the old one....if i am allowed to...i heard google forces you to keep the new device....anybody knows that for sure?
rinderkappajoe said:
the intensity is adjustable...at least for the haptic feedback when typing
Click to expand...
Click to collapse
Yes it is thanks to custom kernels like Franco or Faux.
vibration config on the playstore will sort you out!
It´s adjustable without custom kernel or any app...
just go to settings -->Language & Input
there you will find Google Keyboard and at the right of it there is a symbol (haven´t seen it for the first few days)
Push it and you will find an extra poined called "advanced settings"
There you can change the vibration feedback for typing
rinderkappajoe said:
the intensity is adjustable...at least for the haptic feedback when typing
I have a mushy annoying vibration when typing...especially when typing fast.
I did RMA my Phone and the new phone is allready on the way to me (still have the old one)
After i did RMA i found out that the haptic feedback is adjustable....i put it on 1ms for typing....now it is less annoying and feels kinda normal....but not as crisp as it should imho.
I will receive the new one tomorrow and will compare them......who knows how the new phone will be (dust, dead pixels).....if there is anything like that i´ll keep the old one....if i am allowed to...i heard google forces you to keep the new device....anybody knows that for sure?
Click to expand...
Click to collapse
Wondering how the new one compared to the first one you bought? My vibration is also quite mushy (not crisp/sharp like my GNex nor the Moto X) and I'm wondering if I have a bad unit or if that is how the vibration was intended to be...
Vibration config didn't work
mys3 said:
vibration config on the playstore will sort you out!
Click to expand...
Click to collapse
Hi, i tried installing vibration config... It got installed properly and but was working only on screen.. There was no change in actual vibration intensity... My nexus 5 is not rooted...
Pakkiresh said:
Hi, i tried installing vibration config... It got installed properly and but was working only on screen.. There was no change in actual vibration intensity... My nexus 5 is not rooted...
Click to expand...
Click to collapse
The first thing it says in the app description: *ROOT REQUIRED*
charesa39 said:
The first thing it says in the app description: *ROOT REQUIRED*
Click to expand...
Click to collapse
thanks for your reply.. Is there any solution to reduce vib. intensity without rooting the device...
Pakkiresh said:
thanks for your reply.. Is there any solution to reduce vib. intensity without rooting the device...
Click to expand...
Click to collapse
I don't think so, I did it before and I couldn't find anything, just root it. it's really easy.
by the way that APP works great.
Hi guys, is there any way I can increase vibration strength permanently by editing a file instead of using a root app? I tried doing what Vibration Config does by going into /sys/devices/virtual/timed_output/vibrator/amp and changing the value from 60 to 95, which works, but on a reboot it keeps changing back. Any idea how to keep it permanent? Thanks
Hobbesfed said:
Hi guys, is there any way I can increase vibration strength permanently by editing a file instead of using a root app? I tried doing what Vibration Config does by going into /sys/devices/virtual/timed_output/vibrator/amp and changing the value from 60 to 95, which works, but on a reboot it keeps changing back. Any idea how to keep it permanent? Thanks
Click to expand...
Click to collapse
It changes back because the kernel sets everything back to default, which is why kernel apps have a "set on boot" option. It also requires root access to be able to modify such values.
You can:
- compile a kernel yourself and change the default
- use a kernel app to set on boot
- use tasker to change the value on boot
- change it manually every time
An init.d file can do the job also.
Wakamatsu said:
An init.d file can do the job also.
Click to expand...
Click to collapse
Yeah forgot about that halfway through writing the post, but you also need support for init.d in kernel ramdisk.
Me and the wife both have the Note 5 and I'm curious if anyone has had any issues with the advancedetails messaging and read reports. Sometimes it works great then all the sudden stops working until I turn it on/off in the settings and close out the app. Any ideas?
shooter445 said:
Me and the wife both have the Note 5 and I'm curious if anyone has had any issues with the advancedetails messaging and read reports. Sometimes it works great then all the sudden stops working until I turn it on/off in the settings and close out the app. Any ideas?
Click to expand...
Click to collapse
I too had this problem, just out of curiosity did you and your wife's phone get rooted? If yes or no did you freeze any apps or processes with either titanium or (non root) package disabled pro? Any type of flashing? I noticed once I froze some stuff it suddenly stopped working whenever I texted my brother currently looking into it myself! Feedback would be great to help determine possible problems causing this
Sent from my SM-N920T using Tapatalk
shooter445 said:
Me and the wife both have the Note 5 and I'm curious if anyone has had any issues with the advancedetails messaging and read reports. Sometimes it works great then all the sudden stops working until I turn it on/off in the settings and close out the app. Any ideas?
Click to expand...
Click to collapse
Same thing with me and my girl, she has the S6 and I have the Note 5 both completely stock since we love Samsung Pay lol. But sometimes it works great and sometimes doesn't work at all. Like I can send her a text message and it will show delivered and read and then I can send another message a minute later and it will just show the time it was sent.
Sent from my K010 using Tapatalk
shooter445 said:
Me and the wife both have the Note 5 and I'm curious if anyone has had any issues with the advancedetails messaging and read reports. Sometimes it works great then all the sudden stops working until I turn it on/off in the settings and close out the app. Any ideas?
Click to expand...
Click to collapse
I use chomp and it all works. Never have used stock to many issues
BACARDILIMON said:
I use chomp and it all works. Never have used stock to many issues
Click to expand...
Click to collapse
Advanced messaging only works in the stock sms app.
Sent from my SM-N920T using Tapatalk
Lancerz said:
Advanced messaging only works in the stock sms app.
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
I use have all the settings stock has and they work.
BADASS NOTE 5 & 4 & LG G4
BACARDILIMON said:
I use have all the settings stock has and they work.
BADASS NOTE 5 & 4 & LG G4
Click to expand...
Click to collapse
Um, I don't understand what you're trying to say.
Sent from my SM-N920T using Tapatalk
Lancerz said:
Um, I don't understand what you're trying to say.
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
You said advanced messaging only works in Stock. I said it works in chomp as well not just stock.
BADASS NOTE 5 & 4 & LG G4
BACARDILIMON said:
You said advanced messaging only works in Stock. I said it works in chomp as well not just stock.
BADASS NOTE 5 & 4 & LG G4
Click to expand...
Click to collapse
So you can see when the other person has read your message, is typing and you can receive uncompressed pictures and videos in Chomp?
Sent from my SM-N920T using Tapatalk
Lancerz said:
So you can see when the other person has read your message, is typing and you can receive uncompressed pictures and videos in Chomp?
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
The read receipt yes the rest no. So I guess it be a yes /no thing. Not really sure how I feel about people seeing me typing.
Example. If a client sends me a message and I start to type, then I decide to check my data when I hit the office my clients might think I am either blowing them off or just not know my products like I should. I rather play it safe and know they don't know enough to check that lol
BADASS NOTE 5 & 4 & LG G4
BACARDILIMON said:
The read receipt yes the rest no. So I guess it be a yes /no thing. Not really sure how I feel about people seeing me typing.
Example. If a client sends me a message and I start to type, then I decide to check my data when I hit the office my clients might think I am either blowing them off or just not know my products like I should. I rather play it safe and know they don't know enough to check that lol
BADASS NOTE 5 & 4 & LG G4
Click to expand...
Click to collapse
Dude, that is nothing like advanced messaging. I don't think you even know what it is.
I know this is a thread for the Note 5, but I have the Galaxy S5 with Android 5.1.1 and Advanced Messaging. My sister has the same phone and it is also on Android 5.1.1. Sometimes it works, sometimes it doesn't. We both use the stock app and our devices aren't rooted. I believe both phones have to be on LTE or Wi-Fi calling to use Advanced Messaging. It doesn't seem to work on 4G and definitely won't work on Edge. I also feel like Advanced Messaging doesn't work when someone goes over their data limit, but I'm not totally sure. I wish T-Mobile had more documentation and information on the requirements and stuff for using Advanced Messaging. I am usually able to send large photos without a problem, though.
W3TH3KINGzz said:
I too had this problem, just out of curiosity did you and your wife's phone get rooted? If yes or no did you freeze any apps or processes with either titanium or (non root) package disabled pro? Any type of flashing? I noticed once I froze some stuff it suddenly stopped working whenever I texted my brother currently looking into it myself! Feedback would be great to help determine possible problems causing this
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
My phone is rooted but hers is not, however I had the same issue before I had rooted my phone, so even with or without root nothing has changed and the "read" feature has a mind of its own and works when it wants to.
Someone just said in another thread that their pretty sure that BOTH phone have to be connected to a wifi or lte network for the feature to work, otherwise if you on 3g/edge the feature wouldn't work. Even though this sounds like a good possability, even when we are both at home and both connected to our wifi the read reports only randomly work. So I have no idea what the deal is.
Can we control HTC U12+ LED Notification Light colors through a third party app like Light Flow?
itsmohsink said:
Can we control HTC U12+ LED Notification Light colors through a third party app like Light Flow?
Click to expand...
Click to collapse
Nope, we're stuck with the 2 colors.
holz75 said:
Nope, we're stuck with the 2 colors.
Click to expand...
Click to collapse
Strange and weird its sucha nice device, Note 8 has amazing LED notifications!
Sent from my Galaxy Note 8 SM-N9500 using Tapatalk
So, holding my new U12+ in hands now, I slightly miss my HTC 10...is there any chance to disable the notification led while night time or manually without set ALL notification off? Lightflow brings not the expected result, neither does Tasker (somewhere I read that Tasker cant handle this setting with stock rom...) Can't check it because I don't want to unlock, root etc the U12+ yet for reasons.
If this post is off topic, please move to right section. Thanks in advance
Stefan
Stefan-Duisburg said:
So, holding my new U12+ in hands now, I slightly miss my HTC 10...is there any chance to disable the notification led while night time or manually without set ALL notification off? Lightflow brings not the expected result, neither does Tasker (somewhere I read that Tasker cant handle this setting with stock rom...) Can't check it because I don't want to unlock, root etc the U12+ yet for reasons.
If this post is off topic, please move to right section. Thanks in advance
Stefan
Click to expand...
Click to collapse
When you want to root you will be able to do that via cleanslate or kirisakura kernel, the first one doesn't need root but I think it still means unlocking bootloader.
Sent from my HTC U12+ using XDA Labs
Yeah, I think too that flashing a new kernel requires an unlocked bootloader. But I want to avoid this step yet...
So, if there's a without-root solution for my request, it would be much appreciated to get this solution.
Thanks
Stefan