I can't connect my YP-GS1(US) to ODIN3 v3.04 even though I'm using a usb cable to connect my computer and device. I'm trying to root my phone with these steps(http://forum.xda-developers.com/showthread.php?t=1864741). I get stuck on step 12 though because my nothing pops-up in the "ID: COM" field. The only time I can get something to show up is if I boot my device(YP-GS1) in a normal mode. Can someone please help?
Wilfred7 said:
I can't connect my YP-GS1(US) to ODIN3 v3.04 even though I'm using a usb cable to connect my computer and device. I'm trying to root my phone with these steps(http://forum.xda-developers.com/showthread.php?t=1864741). I get stuck on step 12 though because my nothing pops-up in the "ID: COM" field. The only time I can get something to show up is if I boot my device(YP-GS1) in a normal mode. Can someone please help?
Click to expand...
Click to collapse
Also I am 100% positive i am in download mode(Power+Volume down+ok) then Volume up
Related
So in attempt to find my way to cyanogenmod 7 today i managed to brick my phone using odin3 one click. i was able to get my phone back into download mode after reading a few tips. so my new problem is my computer saying "usb device not recogniced. one of the usb devices on this computer has malfunctioned'. i've tried reinstalling the samsung drivers for my captivate and that doesnt seem to fix the problem. Any ideas? And if i can get odin to recognize my phone, should i master clear everything before trying to flash it back to stock?
Re-install the drivers and try again. Be sure to have the ODIN 1 Click open before connecting your phone in download mode.
also try different USB ports. wouldn't be the first time a port caused a connection problem.
well i really have a brick now
i can get my infuse to say download with the yellow triangle but i cant get odin3 to see my infuse no matter what i do
i know it is linked to computer i can here to connect tone when i plug it in but odin dont show any com
what do i do now
i tryed all my usb ports with no luck
i ran as admin
all different combos still no luck
i am running windows 7 64 bit with stock infuse usb cable
all help would be great
did you ensure you have the correct drivers installed ? Install the latest Kies should do the trick
joenalls said:
well i really have a brick now
i can get my infuse to say download with the yellow triangle but i cant get odin3 to see my infuse no matter what i do
i know it is linked to computer i can here to connect tone when i plug it in but odin dont show any com
what do i do now
i tryed all my usb ports with no luck
i ran as admin
all different combos still no luck
i am running windows 7 64 bit with stock infuse usb cable
all help would be great
Click to expand...
Click to collapse
If it's displaying the yellow triangle, it isn't a brick.
There seems to be some sort of problem with your PC. Beyond that I can't help you - I never use download mode on a Windows machine. All I can suggest is - do you see any unknown devices in device manager when the phone is plugged in and in download mode?
i had this problem as well. and still do on the front USB ports of my machine.
Install the Drivers again and try the ports on the Back of your PC....Hope it helps
Had same problem tried for an hour Odin would not recognize, used friends PC recognized first time, phone is not bricked its your PC try restarting, mine finally did recognize phone after continues restarting and switching USB Ports didn't even have to run Odin as admin
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
so, my phone is bricked, I bought a jig since I couldn't access download mode. The jig works perfectly, but no matter what cord, USB port or computer or operating system I still can't get the phone recognized. I always get "USB device not recognized, it may have malfunctioned...etc." I thought it was the drivers and etc, but my friends Galaxy S works in download mode and gets recognized...I thought it might be the USB port, but the jig works everytime and the charger turns the phone on when plugged in.
So I'm out of options, the unbrickable mod is just not in my skill set, what else can I possibly do?
I know you said it was coming up as USB device not recognized...buy did you run Odin and see if it was there?
Yes, neither hemidall or odin detect it.
Sent from my Desire HD using XDA
I can't tell if you tried this, but when I was flashing with the Captivate and Odin, I always re-installed the drivers. Everytime. I also had better luck running Odin as Administrator. Again, couldn't tell from OP if you did all that, so hope I'm not preaching to the choir
Sent from my SAMSUNG-SGH-I997 using XDA App
here it is..
I thinknu shuld download kies mini first and install it..it will install all the needed drivers.
then try to go in download mode u can go in it by
1.take out the battery
2.hold the 2 volume keys (not the power key).
3.put battery inside..
4.then while holding the 2 vol keys plug the usb cable in the phone and to the pc..
it will go in download mode then see tht in odin..
i think this would help u please thanx if it wrks..
yabbb said:
so, my phone is bricked, I bought a jig since I couldn't access download mode. The jig works perfectly, but no matter what cord, USB port or computer or operating system I still can't get the phone recognized. I always get "USB device not recognized, it may have malfunctioned...etc." I thought it was the drivers and etc, but my friends Galaxy S works in download mode and gets recognized...I thought it might be the USB port, but the jig works everytime and the charger turns the phone on when plugged in.
So I'm out of options, the unbrickable mod is just not in my skill set, what else can I possibly do?
Click to expand...
Click to collapse
Have you tried just putting cable in PC then in reg mode hook to phone...let it find and recognize. Then unhook from phone. then put in d/l mode then hook to computer....then open odin.....
EDIT: the cable that comes with the phone is really not such a good cable...i went out and bought a nice thick one..just casue the sammy one works for charging and USB mass storage doesn't mean it will for ODIN...I ran into that with my Captivate and Infuse...I went out and got a nice thick 25$ cable...no issues...also try a diff port...>?
I swear the op never gets read. the phone is bricked, I can't get past the Samsung screen, I have stock 3e recovery, and the only way to get to download mode is the jig. I have tried kies mini and the exe for drivers but none of the multiple computers ive tried recognize the phone, I have tried several different cords as well, I think my only option is Jtag.
Sent from my Desire HD using XDA
No that's not your only option..... If the phone turns on at all ths sts great, diagnosing kies fire the drivers is crucial first off, then use the jig to get into dl then hook up to computer and open heimdall one click back to stock by Ulster, if heimdall still doesn't recognize it, unplug micro USB from phone and plug back in, again the RIGHT drivers for windows or Mac are CRUCIAL! Just went through a huge ordeal with my infuse thinking it was gonna be dead, if you can get to Samsung letters its not bricked, bricked is if it does nothing....read my last post.
Sent from my SAMSUNG-SGH-I997 using XDA
I followed all instructions on rooting my galaxy tab 2 p3113.
But, I put the device in download mode and plug it in no square turns yellow as in the examples.
I do have the /.tar file and am able to select it after clicking PDA.:
What am I doing wrong??
James
Did you download the correct drivers for you device in your PC? When you plug via USB your device in your computer, jumps a notification saying that is actually connected?
It happens to me the first time trying to root my N8000, also searching the drivers for it was a little bit hard, because in the Samsung's official web didn't work the download links.
maybe change the USB cable
I launch ODIN (v.3.10.0) and put my stock image into PDA (and check it). I put my phone into download mode and then attach the usb cable.
I click start and it stalls at NAND write start.
I left it for a while and then just unplugged everything.
I am able to restart my phone and it is not bricked.
Someone please help.
Mastaking said:
I launch ODIN (v.3.10.0) and put my stock image into PDA (and check it). I put my phone into download mode and then attach the usb cable.
I click start and it stalls at NAND write start.
I left it for a while and then just unplugged everything.
I am able to restart my phone and it is not bricked.
Someone please help.
Click to expand...
Click to collapse
Few things to check:
Drivers
Cable
USB port
Try a different computer.
Sent from my SM-N920T using Tapatalk
Mastaking said:
I launch ODIN (v.3.10.0) and put my stock image into PDA (and check it). I put my phone into download mode and then attach the usb cable.
I click start and it stalls at NAND write start.
I left it for a while and then just unplugged everything.
I am able to restart my phone and it is not bricked.
Someone please help.
Click to expand...
Click to collapse
3.10.7 is the latest
Mastaking said:
I launch ODIN (v.3.10.0) and put my stock image into PDA (and check it). I put my phone into download mode and then attach the usb cable.
I click start and it stalls at NAND write start.
I left it for a while and then just unplugged everything.
I am able to restart my phone and it is not bricked.
Someone please help.
Click to expand...
Click to collapse
Your phone isn't bricked, because it boots. I agree with the USB ports and drivers for troubleshooting.
Download the latest Samsung drivers, uninstall any older packages, reboot, install newest drivers and ODIN. For the USB port, on a desktop, avoid using ones connected as hubs (front panel of case) and for laptops, use a port closest to the AC adapter port. Also aim for USB 2 ports if available.
Just an update, I downloaded the newest version of ODIN, I redownloaded the Samsung USB drivers, used the usb cable that came with my phone and connected it to the USB port from the motherboard instead of the case and I was able to flash the Stock image in Odin.
Thanks for the suggestions guys!