Related
what are the benefits of doing super-CID (i.e. 11111111)
If i do superCID can I again restore to stock CID..
Please help
abhishek89 said:
what are the benefits of doing super-CID (i.e. 11111111)
If i do superCID can I again restore to stock CID..
Please help
Click to expand...
Click to collapse
Certain things, e.g. RUUs, need to have the correct Carrier ID on the phone in order to install via the bootloader or recovery using the PG58IMG.zip process. The Latest Firmware packs for example are grouped together into sets, this is to allow you to install them if you don't have SuperCID. If you have got SuperCID you can install any of them as all the CID checks pass.
Another reason to change the CID if to allow you to install a generic RUU instead of the one that came with the phone, this allows you to remove the bloatware. For example I'm on Vodafone and I installed the generic Euro RUU purely to get rig of the Vodafone crap that came pre-installed.
The process to change it back is identical to the way you write the SuperCID just using your original CID (mine for example is VODAP001). IIRC HTC__01 is the generic CID
gol_n_dal said:
Certain things, e.g. RUUs, need to have the correct Carrier ID on the phone in order to install via the bootloader or recovery using the PG58IMG.zip process. The Latest Firmware packs for example are grouped together into sets, this is to allow you to install them if you don't have SuperCID. If you have got SuperCID you can install any of them as all the CID checks pass.
Another reason to change the CID if to allow you to install a generic RUU instead of the one that came with the phone, this allows you to remove the bloatware. For example I'm on Vodafone and I installed the generic Euro RUU purely to get rig of the Vodafone crap that came pre-installed.
The process to change it back is identical to the way you write the SuperCID just using your original CID (mine for example is VODAP001). IIRC HTC__01 is the generic CID
Click to expand...
Click to collapse
So how do I install roms from different carriers
fatswaller4451 said:
So how do I install roms from different carriers
Click to expand...
Click to collapse
first you need to S-OFF then supercid
after that you can use any ruu.exe
Super Cid
rzr86 said:
first you need to S-OFF then supercid
after that you can use any ruu.exe
Click to expand...
Click to collapse
Hey thanks for your response
Ok so I have s-off and super Cid just a few more questions if u don't mind
1. can i install any ruu for any android phone or am I limited?
2. Will installing a ruu for another phone effect the way my current phone works
3. When installing a ruu.exe for another phone will I have to follow the same bootloader unlock method for that phone or my phone?
Sorry for the newbie questions but I have limited knowledge of super cid however I have been rooting for years now
I heard some bad things about super cid but have not had any issues thus far, the guide was very easy to follow and in fact just to make sure it was working I was able to ruu backwards
Thanks for your expertise you r awesome
fatswaller4451 said:
Hey thanks for your response
Ok so I have s-off and super Cid just a few more questions if u don't mind
1. can i install any ruu for any android phone or am I limited?
2. Will installing a ruu for another phone effect the way my current phone works
3. When installing a ruu.exe for another phone will I have to follow the same bootloader unlock method for that phone or my phone?
Sorry for the newbie questions but I have limited knowledge of super cid however I have been rooting for years now
I heard some bad things about super cid but have not had any issues thus far, the guide was very easy to follow and in fact just to make sure it was working I was able to ruu backwards
Thanks for your expertise you r awesome
Click to expand...
Click to collapse
1)with s-off and supercid you are not limited
2)it won't affect anything at all
But probably you will have some official updates from the specific carrier(if you have)
3)I think it depends from the carrier of the Ruu you have chosen
But actually there is no need to unlock the bootloader because you are on s-off
Edit:in second and third question what do you mean by another phone?
I assume you mean another carrier
If yes then yes
If you mean another device(for example Samsung)then absolutely no
Of course you can use any ruu but only from sensation's devices
Sent from my HTC Sensation using xda premium
super cid
rzr86 said:
1)with s-off and supercid you are not limited
2)it won't affect anything at all
But probably you will have some official updates from the specific carrier(if you have)
3)I think it depends from the carrier of the Ruu you have chosen
But actually there is no need to unlock the bootloader because you are on s-off
Edit:in second and third question what do you mean by another phone?
I assume you mean another carrier
If yes then yes
If you mean another device(for example Samsung)then absolutely no
Of course you can use any ruu but only from sensation's devices
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
So I have verified that I have super cid on my evo 4g lte by ruuing backward, however when I try flashing an htc one ruu i get an error message that its the wrong file, so i tried flashing an original evo 4g ruu and still get the same message
I am still s-off
relocked bootloader
super cid
hboot 2.0.9
latest firmware
am i missing something?
Thanks
fatswaller4451 said:
So I have verified that I have super cid on my evo 4g lte by ruuing backward, however when I try flashing an htc one ruu i get an error message that its the wrong file, so i tried flashing an original evo 4g ruu and still get the same message
I am still s-off
relocked bootloader
super cid
hboot 2.0.9
latest firmware
am i missing something?
Thanks
Click to expand...
Click to collapse
wait man man
for which device are we talking about?
not for sensation?
EVO 4g lte
Sent from my EVO using xda app-developers app
fatswaller4451 said:
EVO 4g lte
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
no maaaaannnnn
don't use any ruu for sensation to evo 4g
go to the evo 4g's thread and see there for ruu.exe files
this forum is only for sensation/xe/4g
i thought you were talking about sensation devices
Ok thanks for the info but I was talking about super cid and installing roms from different carrier's
Sent from my EVO using xda app-developers app
---------- Post added at 12:14 PM ---------- Previous post was at 12:06 PM ----------
I was following a previous thread
Sent from my EVO using xda app-developers app
to reduce the confusion
NO- you cant/shouldn't flash another model phone's RUU on another
there is a high chance of bricking the device if you do that
Does SuperCID also network unlocks the phone?
There is a lot of confusion on the internet about SuperCID. I have HTC One S which is locked to T-Mobile and I want to get it network unlocked. the "strings -n 8 /dev/block/mmcblk0p6" method did not show unlock_code for my phone (though it has worked for some other people). While googling I found that doing SuperCID by changing mmcblk0p4 can also network unlock the phone. Please let me know if you have some idea. Thanks.
gol_n_dal said:
Certain things, e.g. RUUs, need to have the correct Carrier ID on the phone in order to install via the bootloader or recovery using the PG58IMG.zip process. The Latest Firmware packs for example are grouped together into sets, this is to allow you to install them if you don't have SuperCID. If you have got SuperCID you can install any of them as all the CID checks pass.
Another reason to change the CID if to allow you to install a generic RUU instead of the one that came with the phone, this allows you to remove the bloatware. For example I'm on Vodafone and I installed the generic Euro RUU purely to get rig of the Vodafone crap that came pre-installed.
The process to change it back is identical to the way you write the SuperCID just using your original CID (mine for example is VODAP001). IIRC HTC__01 is the generic CID
Click to expand...
Click to collapse
Okay i just bought a brand new ATT HTC One X and out of the box it comes with 4.1.1 and is build 3.18 with the 2.14 hboot.
i have flashed htc phones before and so im not new to it.
HOWEVER! lol
I was looking over the forum (and as confusing as it is with the different versions of the htc one x/xl/s/whatever else ) i believe this is the correct forum.
I am completely stock and those are my build and hboot out of the box. I want to root/unlock BL but so far no luck with any of the exploits.
Anyone here successfully rooted a 3.18 one x? or could i flash an RUU for the 2.20 build? how would i flash without first being rooted/custom recovery?
sorry if seem noob questions, been browsing the forums and google/bing all day and can't find a straight answer.
Bubbled said:
Anyone here successfully rooted a 3.18 one x? or could i flash an RUU for the 2.20 build? how would i flash without first being rooted/custom recovery?
Click to expand...
Click to collapse
Unfortunately the answers are no and no. JB is decent even on fully stock AT&T, you will just have to look the other way when scrolling through your app tray
I don't think the current root methods allow for the 3.18 build to gain root. Might be in the 2.20 boat all over again until someone can find a definite procedure.
soooooooooooooooooooooo lame. my rezound had viper rez rom and it was based off one x jb but had all the tweaks and stuff so right now its like a major downgrade lol
guess i'll cry and wait for the HTC One to come out later this month, since i only grabbed the one x cause it was literally 11 cents at walmart with a 14 day return and my rezound is acting up and randomly restarting/tanking battery!
sigh
thanks for the info though Groovy
Bubbled said:
Okay i just bought a brand new ATT HTC One X and out of the box it comes with 4.1.1 and is build 3.18 with the 2.14 hboot.
i have flashed htc phones before and so im not new to it.
HOWEVER! lol
I was looking over the forum (and as confusing as it is with the different versions of the htc one x/xl/s/whatever else ) i believe this is the correct forum.
I am completely stock and those are my build and hboot out of the box. I want to root/unlock BL but so far no luck with any of the exploits.
Anyone here successfully rooted a 3.18 one x? or could i flash an RUU for the 2.20 build? how would i flash without first being rooted/custom recovery?
sorry if seem noob questions, been browsing the forums and google/bing all day and can't find a straight answer.
Click to expand...
Click to collapse
I had exact the same issue and trust me I tried everything I could find. Finally I used exploit v2.1.1 and then rooted with Revolution HD Root using TWRP 2.4.1.0...
lightflier said:
I had exact the same issue and trust me I tried everything I could find. Finally I used exploit v2.1.1 and then rooted with Revolution HD Root using TWRP 2.4.1.0...
Click to expand...
Click to collapse
Try that and you'll get a brick. Those are tools/roms for the Tegra 3 One X.
Sent from my HTC One X using Tapatalk 2
iElvis said:
Try that and you'll get a brick. Those are tools/roms for the Tegra 3 One X.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
OK...
I thought something like this would work:
1. HTCdev bootloader unlock
2. Flash custom recovery (TWRP)
3. Achieve SuperCID (can do this via TWRP adb?)
4. Run S-OFF procedure
juicejuice said:
I thought something like this would work:
1. HTCdev bootloader unlock
2. Flash custom recovery (TWRP)
3. Achieve SuperCID (can do this via TWRP adb?)
4. Run S-OFF procedure
Click to expand...
Click to collapse
AT&T version of the One X isn't officially supported by htcdev to unlock boot loader (which is why many needed to change cid). If people who have the AT&T version are s-on, relocked, RUUed to 2.20, and flashed ota, they cannot root/unlock boot loader unless an amazing dev creates an exploit
Sent from my Nexus 7 using xda premium
panda_mode said:
AT&T version of the One X isn't officially supported by htcdev to unlock boot loader (which is why many needed to change cid). If people who have the AT&T version are s-on, relocked, RUUed to 2.20, and flashed ota, they cannot root/unlock boot loader unless an amazing dev creates an exploit
Click to expand...
Click to collapse
Damn that's annoying! If that were me I would sell my AT&T phone and with the cash buy an overseas One XL model with 32GB
juicejuice said:
I thought something like this would work:
1. HTCdev bootloader unlock
2. Flash custom recovery (TWRP)
3. Achieve SuperCID (can do this via TWRP adb?)
4. Run S-OFF procedure
Click to expand...
Click to collapse
The AT&T CID is blocked within HTCDev.com. A unique situation, almost certainly directed by AT&T. Therefore, on AT&T version of the One X, you need at least temp root to change the CID, then you can unlock the bootloader.
No root/temp root on AT&T 3.18 = no bootloader unlock. It also means no S-off (since you need root to change the CID).
redpoint73 said:
The AT&T CID is blocked within HTCDev.com. A unique situation, almost certainly directed by AT&T. Therefore, on AT&T version of the One X, you need at least temp root to change the CID, then you can unlock the bootloader.
No root/temp root on AT&T 3.18 = no bootloader unlock. It also means no S-off (since you need root to change the CID).
Click to expand...
Click to collapse
At least 1 person had success with xfactor so he could try but if it doesn't work then he's sol
Sent from my VENOMized HoxL
area51avenger said:
At least 1 person had success with xfactor so he could try but if it doesn't work then he's sol
Click to expand...
Click to collapse
I suppose it doesn't hurt to try. Otherwise, I'd just take the phone back, if root/S-off, etc. is important to the OP. I assume 11 cents is a subsidized price. So no point in using up an upgrade on a phone that can't be modded, if he wants to get the HTC One when its released.
OP may also check to see if the store has any older stock with 2.20 firmware (or any previous firmware version except 3.18). Phones with 3.18 out of the box must be very new, so I wouldn't be surprised if they had some older stock also.
I returned the one x today. will be looking into the t-mobile version of the HTC One which they told me comes out friday the 22nd. being a new phone i know i wont be able to do any mods or anything for a while, but that won't take long with the awesome Devs we have here! All the other models of the One X were sold out, and im guessing that someone realized that the new firmware was Out of Box so picked em all up. only had 2-3 stores with one each so its possible. now all the new stores have the new firmware no big deal, i'd prefer an HTC DNA anyways, but we'll see what the One is all about.
redpoint73 said:
The AT&T CID is blocked within HTCDev.com. A unique situation, almost certainly directed by AT&T. Therefore, on AT&T version of the One X, you need at least temp root to change the CID, then you can unlock the bootloader.
No root/temp root on AT&T 3.18 = no bootloader unlock. It also means no S-off (since you need root to change the CID).
Click to expand...
Click to collapse
I tried Xfactor and it said the cid for my device out of box 3.18 firmware 2.14 hboot was CID Cws__001.
Techinstein said:
I tried Xfactor and it said the cid for my device out of box 3.18 firmware 2.14 hboot was CID Cws__001.
Click to expand...
Click to collapse
Yes, the CID for AT&T is cws_001 on all of the previous firmware versions, as well. This hasn't changed. cws__001 is blocked on HTCDev.com.
So i have the key for my past bootloader unlock can i use it?
Enviado desde mi HTC One X usando Tapatalk 2
coldrazor said:
So i have the key for my past bootloader unlock can i use it?
Click to expand...
Click to collapse
Yes.
If you were unlocked before, how did you get on the 3.18 RUU/OTA? Did you change your CID back to AT&T's CID? Or did you S-off.
If you are S-off, no need to unlock the bootloader.
redpoint73 said:
Yes.
If you were unlocked before, how did you get on the 3.18 RUU/OTA? Did you change your CID back to AT&T's CID? Or did you S-off.
If you are S-off, no need to unlock the bootloader.
Click to expand...
Click to collapse
Yes, you still need to have the bootloader unlocked to write to recovery and some other stuff. I tested this myself.
exad said:
Yes, you still need to have the bootloader unlocked to write to recovery and some other stuff. I tested this myself.
Click to expand...
Click to collapse
Really? Kinda negates part of the purpose of having S-off, doesn't it?
My friend and I are having problems unlocking his HTC One X. we've tried various tutorials and followed many threads but have had no luck. We've tried the One_X_ATT_All_In_Kit_v2.1.1, Root-one-x and OneXRootOneClick with no luck. The bootloader will not unlock, we kept getting an error code 160 and MID not allowed. So no Unlock_Bin was generated. It has been upgraded to 4.1 via the AT&T update.
Bootloader screen reads:
EVITA PVT SHIP S-ON RL
HBOOT-2.14.0000
RADIO-0.24p.32.09.06
OpenDSP-V34.1.0.45.1219
eMMC-boot
Nov 26, 2012, 18:37:14:-1
If anybody can point us in the direction of where we can go to root the phone, that'd be great.
Try asking in the Evita forum here: http://forum.xda-developers.com/forumdisplay.php?f=1538
This forum is for the International version (Endevor)
I'm sorry about that, is there anyway a Mod can move this over to that forum? I don't want to create another thread for the same issue
Request sent.
Welcome to the One XL thread!
http://forum.xda-developers.com/showthread.php?p=33189590
[TOOL] HTC One X (Evita) All-In-One Toolkit V2.1.1 [2-1-2013] [PERM ROOT][Noob-Proof]
Here is what you need. If you took the job ota I'm afraid you stuck without root for now. But if you need further assistance let us know?
Sent from my HOX w/CM10.1 4.2.2 s-off
nawarkk said:
HBOOT-2.14.0000
Click to expand...
Click to collapse
I'm afraid you're out of luck for now. There is no root method for JB yet.
iElvis said:
I'm afraid you're out of luck for now. There is no root method for JB yet.
Click to expand...
Click to collapse
Duh... I all ways forget to look at the specifics
2.14 vs 1.14
Thanks Elvis.
Yea too bad we can't spoof the cid as before.
Sent from my HOX w/CM10.1 4.2.2 s-off
I believe, via the all in one toolkit, we were able to get the CID to change to 111111, but only after a few tries. I'll have to check back with him if it indeed did change.
So what you guys are saying, is unless somebody finds a way to crack JB, there is no way to unlock the bootloader/root?
Is it not possible to run the RUU that would place him back to the android and hboot he had before? (Don't know if it was ICS or what it was)
nawarkk said:
I believe, via the all in one toolkit, we were able to get the CID to change to 111111, but only after a few tries. I'll have to check back with him if it indeed did change.
So what you guys are saying, is unless somebody finds a way to crack JB, there is no way to unlock the bootloader/root?
Is it not possible to run the RUU that would place him back to the android and hboot he had before? (Don't know if it was ICS or what it was)
Click to expand...
Click to collapse
Can't run a ruu for older firmware without s-off.
But if you actually achieved supercid, you should be able to unlock, root, and s-off.
Are you positive about that? Because I was able to run an older RUU on my HTC Evo 3d, and got the phone to an older firmware without S-Off..
We'll have to check for sure on the CID and report back when we can.
nawarkk said:
Are you positive about that? Because I was able to run an older RUU on my HTC Evo 3d, and got the phone to an older firmware without S-Off..
We'll have to check for sure on the CID and report back when we can.
Click to expand...
Click to collapse
Different phone. Newer ruu's check for hboot versions. Won't work on this one.
Hello all. Quick question about running the 2.20 RUU -- I seem to recall, around the time that the 3.14 OTA update came out for the AT&T Version of the One XL a lot of folks were hard-bricking their phones that were previously rooted on a separate JB ROMs..perhaps something with the Super CID? I did not investigate this much because I wasn't ever interested in taking the 3.14 OTA but my question is: Can I safely run the 2.20 RUU on hboot 1.14 S-OFF; I am currently running a JB ROM right now. Sorry for the question but I can't seem to find the threads that explained why users were getting hard bricks from the OTA -- I'm about to wipe my phone and give it to someone else and I would hate to hard-brick it and the phone be no longer usable
TheEmpyre said:
Hello all. Quick question about running the 2.20 RUU -- I seem to recall, around the time that the 3.14 OTA update came out for the AT&T Version of the One XL a lot of folks were hard-bricking their phones that were previously rooted on a separate JB ROMs. I did not investigate this much because I wasn't ever interested in taking the 3.14 OTA but my question is: Can I safely run the 2.20 RUU on hboot 1.14 S-OFF; I am currently running a JB ROM right now. Sorry for the question but I can't seem to find the threads that explained why users were getting hard bricks from the OTA -- I'm about to wipe my phone and give it to someone else and I would hate to hard-brick it and the phone be no longer usable
Click to expand...
Click to collapse
The issue pertained to those with Super CID and S-ON.
Since you're S-OFF, it's safe to run the RUU. no need to relock the bootloader or change your CID.
exad said:
The issue pertained to those with Super CID and S-ON.
Since you're S-OFF, it's safe to run the RUU. no need to relock the bootloader or change your CID.
Click to expand...
Click to collapse
Thanks for the reply. Wow thats great, I remember last time I RUU I had to fastboot oem lock and then run it and flash the unlock token again which was pain in the a$$.
Thanks again for the clarification -- added [Solved]
exad said:
The issue pertained to those with Super CID and S-ON.
Since you're S-OFF, it's safe to run the RUU. no need to relock the bootloader or change your CID.
Click to expand...
Click to collapse
Just to clarify --- can I also run the 3.14 OTA if I am S-OFF without Brick?
TheEmpyre said:
Just to clarify --- can I also run the 3.14 OTA if I am S-OFF without Brick?
Click to expand...
Click to collapse
That's right.
Unfortunately for me, I was s-on and supercid when I took the OTA. Hard bricked my phone and I had to have it replaced lol.
marcur12 said:
Unfortunately for me, I was s-on and supercid when I took the OTA. Hard bricked my phone and I had to have it replaced lol.
Click to expand...
Click to collapse
Yeah I just vaguely remember seeing some unfortunate threads after the OTA came out and so I just thought I would check. Bummer about your device sorry
Sent from my HTC One using Tapatalk 2
TheEmpyre said:
Yeah I just vaguely remember seeing some unfortunate threads after the OTA came out and so I just thought I would check. Bummer about your device sorry
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Fun fact: Running the 2.20 RUU down from a 3.17 based ROM removes the "TAMPERED" tag from the bootloader. At least on hboot 1.14 and S-OFF
TheEmpyre said:
Fun fact: Running the 2.20 RUU down from a 3.17 based ROM removes the "TAMPERED" tag from the bootloader. At least on hboot 1.14 and S-OFF
Click to expand...
Click to collapse
Running any RUU should remove that Tampered text which is documented in the modding your bootloader screen thread.
Hello everyone.
I am new to this part of the forum for i just received a somewhat non working AT&T HTC ONE XL from a friend.
I presume he did not read much into his issue at the time and messed up this phone one way or the other.
Basically the phone works, just not as a phone.
So i will take my time to explain the whole situation with as much detail as possible.
I am personally familiar with rooting, setting up recovery and installing custom roms on android phones (just not on this model yet).
The phone details in its current state are:
- android version 4.0.4
- htc sense version 4.0
- software number cleanrom 4.5 beta2
- htc extension version htcextension_403_1_ga_20
- kernel 3.0.8-01564-gdc95f45
- baseband 0.16.32.09.01_3_10.79.32.08L
As soon as i received the phone, i contacted at&t to ask for an unlocking code, they gladly oblige.
I insert the new SIM card (non AT&T) and the phone asks me to insert the code. After correctly inserting it, the phone accepts the code and proceeds to reboot. After the reboot i get the phone locked screen again and asks me for the code one more time.
At this point i start searching online for the official firmware from htc for this specific model and find the 4.2.2 version and proceed to install it according to their requirements and steps (in manual mode from a desktop pc since the rom installed doesn't have the update feature).
The process gets locked at a point and cannot proceed further.
Phone boots normally again and i decide to do a factory reset. This i when i notice a teamwin custom recovery was installed which is what is blocking the official rom installation.
So at this point i am open for ideas.
I'm positive the issue is not very hard to solve but i also know that i am missing the original recovery. I can only guess no official updates were installed so the phone was running the original 4.0.4 version.
Meanwhile i will be scouting this forum on how this phone exactly works for i understood that there were two forms of recoveries for it (one full and one partial).
I still don't know the recovery version, if it's good, how to access it (different combinations of volume and power pressing didn't work for me).
Finally your opinion on how to make the phone unlocking code work, as in would i need to go back to official, or would a custom different rom work as a solution.
Wish you guys a good day and awaiting your feedback.
Cheers.
Need more info. Boot into bootloader by holding down both the volume down rocker and the power button. After the power button is held for a few seconds, you should see the capacitive buttons flash a few times, and the phone will reboot. Let go of the power button, but DO NOT let go of the volume down rocker until the while hboot screen comes up. When you see the hboot screen, tell us what it says.
In particular, we need to know if it says s-off or s-on, if it says CID 11111111, and hboot version. Also, if it says LOCKED, UNLOCKED, or RELOCKED.
Official RUU will not run if the bootloader is UNLOCKED (needs to be RELOCKED or LOCKED). But be aware, if the phone is superCID and s-on, running a Jellybean RUU or OTA will brick the phone. Which is one of the reasons we need the bootloader info.
RUU does not need to have stock recovery to run, only OTA does. My guess is your bootloader is unlocked, or its the wrong RUU. Any error message when the RUU fails (if so, what does it say)?
Hi, thank you for your quick reply.
I'm going to write down all that is written in the recovery for i still don't understand what locked or unlocked means, s-on or s-off.
anyway, here goes:
tampered
unlocked
evita pvt ship s-on rl
hboot-1.09.0000
radio-0.16.32.09.01_3
opendsp-v25.1.0.32.0405
emmc-boot
i can't find anything related to cid and i'm still not used to this recovery just yet. wouldn't want to press anything just yet.
i hope i gave enough info and i guess it doesn't look too good just yet.
thank you again for your help.
you should remind me to reduce the use of "just yet".
i'm doing some more reading about superCID and S-on or S-off.
I understand there's a utility from this thread that could determine the supercid status.
http://forum.xda-developers.com/showthread.php?t=1672284
again i'd like to point out i have no clue what has been done to this phone so i am trying to handle it with as much care as possible in order not to brick it.
in case superCID is 1111111 and naturally i don't have the original CID, where would that leave me?
As i am understanding slowly how this phone works, if the previous user managed to install a custom rom and a custom recovery on it, would only make sense to assume the superCID has been modified? (i'll be running the tool shortly unless someone jumps and says NOOOOOOOOO don't do it!!!)
I also noticed the teamwin recovery installed is 2.1.8.1
next is understanding what s-on and s-off are all about.
i have a feeling my chances of reverting to stock firmware are slimming. this is quite a complicated phone, nice challenge.
i'm going to point out again what my main problem is: i can't unlock the sim using the code provided by at&t since as soon as the phone reboots it asks me again. so i don't mind whichever route to take, whether custom or stock, as long as i can unlock the sim the simple way.
cheers.
srasiroslayer said:
At this point i start searching online for the official firmware from htc for this specific model and find the 4.2.2 version and proceed to install it according to their requirements and steps (in manual mode from a desktop pc since the rom installed doesn't have the update feature).
The process gets locked at a point and cannot proceed further.
Phone boots normally again and i decide to do a factory reset. This i when i notice a teamwin custom recovery was installed which is what is blocking the official rom installation.
Click to expand...
Click to collapse
This is not correct (the text I've bold faced above). OTA requires stock recovery, but RUU does not.
What stopped the RUU from working, is that you bootloader is unlocked (as indicated by the "unlocked" text in hboot). But in your case, you are lucky, since if you were trying to run the 3.18 Jellybean RUU, if it had gotten past the bootloader lock check, it would have bricked the phone (known bug) if you have SuperCID (which is pretty likely).
To reiterate: DO NOT try to relock the bootloader and run the 3.18 RUU, as with S-on and SuperCID, this will brick your phone.
If you have a working adb/fastboot environment, you can easily check CID with the command: fastboot getvar all
---------- Post added at 10:26 AM ---------- Previous post was at 10:23 AM ----------
srasiroslayer said:
i have a feeling my chances of reverting to stock firmware are slimming.
Click to expand...
Click to collapse
That is far form the truth. Getting back to stock is not that hard.
But if you only want to SIM unlock, I'm not sure that going stock will necessarily help you. You are on CleanROM now, which is pretty close to stock, and I don't think there have been many issues getting SIM unlock on CleanROM.
redpoint73 said:
This is not correct (the text I've bold faced above). OTA requires stock recovery, but RUU does not.
What stopped the RUU from working, is that you bootloader is unlocked (as indicated by the "unlocked" text in hboot). But in your case, you are lucky, since if you were trying to run the 3.18 Jellybean RUU, if it had gotten past the bootloader lock check, it would have bricked the phone (known bug) if you have SuperCID (which is pretty likely).
To reiterate: DO NOT try to relock the bootloader and run the 3.18 RUU, as with S-on and SuperCID, this will brick your phone.
If you have a working adb/fastboot environment, you can easily check CID with the command: fastboot getvar all
---------- Post added at 10:26 AM ---------- Previous post was at 10:23 AM ----------
That is far form the truth. Getting back to stock is not that hard.
But if you only want to SIM unlock, I'm not sure that going stock will necessarily help you. You are on CleanROM now, which is pretty close to stock, and I don't think there have been many issues getting SIM unlock on CleanROM.
Click to expand...
Click to collapse
Wunderbar,
Thank you again for clarifying things up.
I've been taking this time to read more about this phone on this thread:
- http://forum.xda-developers.com/showthread.php?t=1671237
So i am starting to understand how it works.
i have to admit that i should consider myself lucky for if the phone had a locked bootloader, it would've been bricked.
i've been reading a bit about superCID and i don't have a working linux environment (other than virutal) running right now.
but i'll figure out how to check if it's superCID or not (more likely yes).
now that i've figured out one way or the other that the simlock has nothing to do with the firmwares or recovery........... what could cause it?
again i just want it to work and then i'll take the time to play with the custom roms.
I have the correct unlocking code from AT&T since it wouldn't have accepted it to reboot the phone if it was wrong.
so what could be messing it up?
Cheers
srasiroslayer said:
Wunderbar,
i've been reading a bit about superCID and i don't have a working linux environment (other than virutal) running right now.
but i'll figure out how to check if it's superCID or not (more likely yes).
Click to expand...
Click to collapse
You don't need a Linux environment to get fastboot/adb working. And you will need them if you want to get s-off or change the CID (which would be the solutions to your problem of running the RUU).
To get fastboot/adb going, I'd suggest you start here: http://forum.xda-developers.com/showthread.php?t=1754018
There are some apps what will read the phone's state including CID. Others here have mentioned the name of one (or more) such app, but I can't recall, and I don't use it. I'm used to using fastboot.
srasiroslayer said:
now that i've figured out one way or the other that the simlock has nothing to do with the firmwares or recovery........... what could cause it?
again i just want it to work and then i'll take the time to play with the custom roms.
I have the correct unlocking code from AT&T since it wouldn't have accepted it to reboot the phone if it was wrong.
so what could be messing it up?
Click to expand...
Click to collapse
Not sure. Going back to stock might help. Its all I can think of. But don't be disappointed if it still doesn't work.
Alright,
So i figured out my CIDnum is 1111111111 using fastboot.
I understand there's a tool that can revert that.
I should also switch to s-off next.
Then at the end lock the bootloader using the adb commands.
Am i on the right track?
At this point i'll try running the RUU and cross my fingers.
My question is, shouldn't i have the original CID number?
and another off topic point, i have no clue what s-on or s-off are.
i'll get into that reading mode again in a bit.
Thank you again, i feel i'm on the right track now and confident.
Cheers
P.S.: do you need me to post the "fastboot getvar all" results? or only thing missing to be sure of was the CID?
Hang on, you're s-on and SuperCID, don't run the RUU or you'll brick your phone. You need to do some reading and research all this before you try these things.
Sent from my Evita
Guys I am Vivek Rajput, from India. I have AT&T HTC oneX. Anything related to internet is not working except whatsapp. Every app is showing network error msg. Showing some data here which i got after reading here. Assume me complete novice about software/cellphones.
***LOCKED***
EVITA PVT SHIP S-ON RL
HBOOT-1.14.0002
RADIO-0.19as.320911_2
OpenDSP-v29.1.0.45.0622
eMMC-boot
Jun 11 2012,14:36:28
Click to expand...
Click to collapse
Have you checked your APNs?
Sent from my Evita
srasiroslayer said:
Alright,
So i figured out my CIDnum is 1111111111 using fastboot.
I understand there's a tool that can revert that.
I should also switch to s-off next.
Then at the end lock the bootloader using the adb commands.
Am i on the right track?
At this point i'll try running the RUU and cross my fingers.
Click to expand...
Click to collapse
If you are going to s-off, you DO NOT want to change the CID. SuperCID (11111111) is needed to s-off.
As mentioned, make sure you s-off before RUU, or you will brick.
Once you are s-off, it shouldn't matter whether you lock the bootloader or not. S-off means all security checks are bypassed, including the check for bootloader lock.
srasiroslayer said:
and another off topic point, i have no clue what s-on or s-off are.
Click to expand...
Click to collapse
s-off, as mentioned above means all security checks are off. There are good and bad points to this.
The good, is that you will be safe of the SuperCID + RUU brick condition. Custom ROMs will also be easier to flash, if you are interested in doing that (do not need to flash boot.img separately).
The bad of s-off, is that because all security checks are off, there are no safety checks to prevent you from flashing the wrong things. You have to be very careful you don't flash something that is not intended for the device, as it may brick the phone.
Are you are okay with that, then proceed with s-off. If not, the alternate solution is to change the CID back to the proper AT&T CID (cws__001). This will also prevent the SuperCID + RUU brick condition. But may make the phone harder to s-off in the future, if you later choose that route.
It looks like then that the s-off route is the one to take, since i will definitely in the future be interested in flashing custom roms.
And it looks relatively easy as per:
http://forum.xda-developers.com/showthread.php?t=2155071
After doing some reading, it also looks safe to achieve s-off on custom roms such as my case.
I'm still reading if s-off will work on my bootloader version or if there are any specific versions to run it at. (so far no mention so good)
I'm guessing i will run s-off today and if everything works out as it should will post my results here.
Only then will i proceed to run the RUU which i downloaded from htc for the at&t model specifically (no chance i could go wrong with that).
Thank you for all the help, i honestly don't think i would've found my way around easily without guidance.
Cheers
Yes, the s-off method is easy, and it should work on any hboot version.
Good luck.
Could just having S-off fix my sim locked issue?
In any case new questions arise in my head such as since my model number is PJ8310000 and that with s-off i will be installing PJ8312000-OneX.zip, will that affect running the RUU later on?
srasiroslayer said:
Could just having S-off fix my sim locked issue?
Click to expand...
Click to collapse
I doubt it. SIM lock and s-off are not related, to my knowledge.
srasiroslayer said:
In any case new questions arise in my head such as since my model number is PJ8310000 and that with s-off i will be installing PJ8312000-OneX.zip, will that affect running the RUU later on?
Click to expand...
Click to collapse
Once you are s-off, all security and safety checks are off by definition. As long as you are running an RUU meant for EVITA, you will be safe, and it should run properly.
Looks like i got the 99 error thing.
at first i had the error 92 and all was working good but after the final reboot didn't get s-off
the second try i'm getting error 99.
I'm going to read more into it.
I'm still s-on so.......
So here are the current updates.
As i mentioned in the previous post, running it the first time resulted in error 92 which is normal, followed instructions and didn't get s-off.
second time i had error 99. still no s-off.
I turn off the device and power it back on, run the script all over again with a real good attention and precision (i usually don't f*ck things up).
This time i get the error 92 again and still no success at the end. (did this over 4 times now and no s-off).
would i be logical for me to assume that once the rom is booted it's messed up somewhere? hence the last part of the script not working and also hence sim unlock not working?
what's a good custom rom that would i could install using recovery and not brick my phone?
maybe just installing one would solve all my issues.
Cheers
What ROM are you attempting s-off on?
PS. Asking for a suggested/best/favourite ROM isn't allowed here.
Sent from my Evita
timmaaa said:
What ROM are you attempting s-off on?
PS. Asking for a suggested/best/favourite ROM isn't allowed here.
Sent from my Evita
Click to expand...
Click to collapse
Hi,
I'm trying it on CleanROM 4.5 beta2.
And by best rom in my case was asking one that would be compatible with my situation, as in hboot 1.0.9, teamwin 2.1.8.1 recovery, supercid, unlocked, s-on.
Cheers.