well the brick happened when i was installing a new rom (tested before) and ggaps(i didnt reebot cellphone before installing ggaps after room)
when i pressed the reboot button on cwm the screen went black and now it only "turns on" using vol up+home++power combo (odin detects it)
but the problem is that when i try to flash the stock rom using one package option odin get stuck in <1> setup connection...
jig dont work either (tested my homemade jig in my mom cellphone that is the same model and worked)
the only way i can make odin detects the phone is using vol up+home+power combo (screen stay off i think is emergency download mode)
no download mode or recovery mode
here is the odin log
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
Press "volume down & Home & Power" buttons together. Then try flashing firmware via Odin.
Galaxy_Rohit said:
Press "volume down & Home & Power" buttons together. Then try flashing firmware via Odin.
Click to expand...
Click to collapse
already tryed but like i said before phone wont go into downlaod mode using that combo not even using jig
Bro, what are you talking about? GFit doesn't have an "emergency mode", there is no combo that uses VolUP. Are you sure you are talking about GFit?
Sent from my GT-S5670 using Tapatalk 2
camilolos said:
already tryed but like i said before phone wont go into downlaod mode using that combo not even using jig
Click to expand...
Click to collapse
Its called ARM11 mode. It should be doing your work. I think you have destroyed your NAND. better to take it to service centre
Related
to be staright forward.!!! my phone suddenly got dead while playing some games.
i can go in download mode but not in recovery mode.!
my phone is rooted.!
after connecting phone to pc it show some unknown devidces...usb not recognized and stuff.
odin cant detect my phone...what do i do...please help.:crying:
rajjhamtani said:
to be staright forward.!!! my phone suddenly got dead while playing some games.
i can go in download mode but not in recovery mode.!
my phone is rooted.!
after connecting phone to pc it show some unknown devidces...usb not recognized and stuff.
odin cant detect my phone...what do i do...please help.:crying:
Click to expand...
Click to collapse
I don't have third-eye opened so I can't guess your phone model but
1.install Android SDK
2.install Kies if you have it uninstall restart PC download last version install it then restart PC now surely you have drivers (no unknown device)
3.flash by Odin a stock rom from sammobile.com get .pit and Odin from this site also you have to subcribe to get access to download link
before step 3 put you phone in download mode and connect to PC then check in Device Manager for ADB Interface (see pict) if not something is bad with previous steps
Hi,
I'm new to rooting and custom ROMS so please go easy on me.
I'd this old phone of my brother GT-S5570, wanted to install kitkat 4.4.3 so followed this site
droidthunder.com/install-android-4-4-3-kitkat-cyanogenmod-11-custom-rom-samsung-galaxy-minipop-gt-s5570
The site said I needed Clockwork installed in my phone , But I couldn't install clockwork via phone so I followed this procedure
Opened-- ODIN
Selected OPS -- TASS_v1.0
One Package --- tass-recovery-cwm
Success that is what it showed in ODIN and I rebooted the phone started as usual.
Then tried recovery mode .... Stuck on SAMSUNG LOGO forever
Took out battery restarted it in normal mode working fine
Tried recovery again not working but Downloading mode and ARM mode working.
Now I Installed ROM MANAGER and asked it to restart in Recovery mode....
Phone stuck on Samsung LOGO even in normal start mode
Recovery mode doesn't work ( Home + Power ) but Downloading mode and ARM mode working.
Trying to install official Gingerbread 2.3 via ODIN just to recover the phone (I've no backup doesn't matter either)
Select OPS ---TASS_v1.0
One Package- S5570ZSKPB_S5570OZSKPB_S5570XXKPL_HOME.tar.md5 (Okay)
Turned on phone in Download MODE (Okay)
But when I press START
I get
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> --- cannot open the usb serial port. code: 32
Tried different ports ,installed Kies , even tried Home+Power+Vol Down then Inserted battery with everything pressed but no luck.
BTW Windows notification says Samsung Composite and Modem installed whenever I change the port after Laptop restart.
Please help
VimalLFC said:
Hi,
I'm new to rooting and custom ROMS so please go easy on me.
I'd this old phone of my brother GT-S5570, wanted to install kitkat 4.4.3 so followed this site
droidthunder.com/install-android-4-4-3-kitkat-cyanogenmod-11-custom-rom-samsung-galaxy-minipop-gt-s5570
The site said I needed Clockwork installed in my phone , But I couldn't install clockwork via phone so I followed this procedure
Opened-- ODIN
Selected OPS -- TASS_v1.0
One Package --- tass-recovery-cwm
Success that is what it showed in ODIN and I rebooted the phone started as usual.
Then tried recovery mode .... Stuck on SAMSUNG LOGO forever
Took out battery restarted it in normal mode working fine
Tried recovery again not working but Downloading mode and ARM mode working.
Now I Installed ROM MANAGER and asked it to restart in Recovery mode....
Phone stuck on Samsung LOGO even in normal start mode
Recovery mode doesn't work ( Home + Power ) but Downloading mode and ARM mode working.
Trying to install official Gingerbread 2.3 via ODIN just to recover the phone (I've no backup doesn't matter either)
Select OPS ---TASS_v1.0
One Package- S5570ZSKPB_S5570OZSKPB_S5570XXKPL_HOME.tar.md5 (Okay)
Turned on phone in Download MODE (Okay)
But when I press START
I get
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> --- cannot open the usb serial port. code: 32
Tried different ports ,installed Kies , even tried Home+Power+Vol Down then Inserted battery with everything pressed but no luck.
BTW Windows notification says Samsung Composite and Modem installed whenever I change the port after Laptop restart.
Please help
Click to expand...
Click to collapse
using older odin, ex 3.07
tonypro79 said:
using older odin, ex 3.07
Click to expand...
Click to collapse
I'm using Odin 4.3,
BTW are you suggesting to use 3.07 ?
Thanks for the quick reply
Hey guys
Would you please help me get my phone detected by odin in download mode , my galaxy s plus is detected by odin in normal and recovery mode but not in download mode , windows says '' usb device not recognized ''
Fayxos said:
Hey guys
Would you please help me get my phone detected by odin in download mode , my galaxy s plus is detected by odin in normal and recovery mode but not in download mode , windows says '' usb device not recognized ''
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Try looking here
It shows all the steps and everything you should need to download to get back to stock.
Good luck!
I used cwm recovery to start download mode when i clicked advance>>boot into recover mode in cwm mode, then my device is shut down and it is not starting, nothing is happening even it is not showing battery charging sign on shut down but it is detected by my pc/odin when i connect it with my pc . but i was unable to install tar file throw odin. what is the problem and how can i solve this. Thanks in advance.
Hi, My infuse 4g is unfortunately disconnected during return to stock rom using odin flash. Then i turn on my phone no samsung logo ,No charging symbol No recovery
but
pressing volume up +Power on it shows red text on left corner
RST_STAT=0×1 , ,
similiar messages only
then
i am coonect to odin using usb cable it detected by odin but flashing it is stuck in setup connection. i Am also wait for 30minuted no change.then try another odin version it says cannot find COM port error msg.
Also using heimdall it sayd protocol initilization failed
plsss help me ????????