Database Info

How to connect your android-phone to the NET using your PC internet

NO NEED to Go Somewhere else, here is how to reverse tethering ( How to use internet)
Hi lovers of knowledge
First we can use our phone as a modem for our PC, that process is easier than usisng our PC as a internet source(internet provider)
for our phone.
As a master of android, I offer a solution for all android phones.
AIO has been developed by a brother(android developer) from egypt
1 - Download the attached rar file(winrar) TheKingOfAndroid.blogspot.com_AIO.rar
2- Go to -"system settings", -"developer options" or "development" , -activate "USB debuging"
3- your phone ADB-drivers must be installed
3- open the folder and run AndroidTool.exe ; an application will be installed in your phone: AIO remote
4- your phone is now connected to the net via PC
ENJOY

[Guide][wlan adb] Use your android device to use adb commands in another one via WiFi

Hello guys,
I'm here with a way to issue adb commands to another android through WIFI network.
Prerequisites:-
1) 2 android (of course)
2) Basic knowledge in android
Steps:-
1)Select the device that you want to receive the commands [Here on will be referred to as "Device"]
2)Turn your WiFi hotspot on on device
3)Select the device that you want to issue commands to [Here on will be referred to as "Host"]
4)Connect the device to the host
5)Go to developer option and turn it on in "Device" and also turn on wireless adb if you are in lollipop.Or alternatively download ROM toolbox and enable wireless adb in there.You will receive a unique ip address with port
6) open terminal emulator in "Host" and type "adb connect IP" In place of IP type the IP address that you got in step 5
7) congrats you are now connected via an WiFi
Click thanks if I helped.?

[TOOL] ADB WiFi - Android Studio

https://www.youtube.com/watch?v=Dnady9E1XKE
SCREENSHOTS
List:
1. Android app
2. Android app
3. Android app
4. Android app Settings
5. PC ADB
ABOUT
ADB WiFi app helps you to use ADB over your WiFi. Makes it easy to debug/test your Apps from Android Studio or any other IDE. No need to use USB cable anymore.
★ You can use App for PC to easy setup your computer, install ADB and connect over WiFi.
★ Or you can use standard method over CMD(Command Prompt) to connect your Android device over WiFi to Windows, MAC or Linux.
★ Yes, this "tool" will only help you to faster make WiFi connection with your PC. App only contain steps how to connect and show your IP address.
It is not required to install this app. I do not like to waste my time, every time after reboot phone I need to write in Command prompt and searching for IP. This app will helps to reduce the time to connect over WiFi.
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
NOTE:
1. Enable USB Debugging on your Android phone.
2. You will need USB cable once at the start. After setup won't need the USB cable until your device has restarted.
3. This app provides instructions how to connect ADB over WiFi
4. For fast and easy setup use PC App
5. Enjoy
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
DOWNLOAD
ADB WiFi - AS: Google Play
PC ADB: In XDA Attachment
Mirror: MediaFire

could you make this for mac too

How do things change for this app with the advent of Developer options Wireless debugging in Android 11?

(Q) Using Network Manager app with Kali Nethunter

Hi.
I need some help from a member using Network-Manager to handle their wireless wifi interfaces with Kali Nethunter.
After installing network-manager & network-manager-gnome (v1.8.2.1) did you have to change any Network Conig files to get your interfaces connected to network-manager?
How did you connect to the internet?
I cannot get the network-manager-applet enabled.
Enable network-manager is grayed out.
I've tried service network-manager start.
Clicking edit connection does not bring up any screen.
All I get is network-manager is not running from the nm-applet trey.
I understand nm-applet is disabled on boot.
After booting into kali nethunter, I plug my external interface wlan1 card (TP-Link-TL-WN722N ) to my OnePlus One Phone using otg cable.
- Start wlan1 (airmon-ng start wlan1 ) green light turns on.
- Start network manager service. Status shows “NM is running”.
Still network-manager remains disable.
Tried uninstalling/re-installing network manager.
See my 2 Screen Attachments behavior of my Network-Manager-applet.
Can go into monitor mode and perform aircrack-ng cmds with wlan1.
Atheros drivers ( AR9271ath9k, ath9k_htc) are loaded in Lib/Firmware.
But something is not working or missing.
What steps did you do after installing network manager apps?
Info:
- ROM: Lineageos 14.1 bacon Android 7.1.2 Marshmallow. Device: OnePlus One.
- Uname: Linux Nethunter 3.15. Kernel 3.4.112-lineageos-g23c699a armv71.
- Distro: Kali Linux Rolling V2017.1
- Architecture: Armhf
- CurrentDesktop: XFce V4.1,2
- Client: VNC Viewer V3.3.1 connect via localhost 127.0.0.1 to linux
-Network-Manager and Gnome v1-8-2-1 armhf
Thanks.
TC.

connecting chroot container to a network

I am using a p5210 an installed kalilinux on the tab
I got the kali.img from a different site and used linuxdeploy to run it
I am conneccting to it using vnc viewer
My device (tab) is conneted to the wifi but my kalilinux (chroot container ) isnt connected to my network
non of the terminal commands posted on the net to connect to the net work for me
what do i do because without having an internet connection in the kali linux (chroot container ) i cannot download important utility's :crying: