Related
Hello, and hope this is the right place to post this.
So, without any knowledge about all this smatphone/android stuff, I finally got one by a really good price. An ot-983.
Some friends conviced me to root it. I found a way to do it and noticing all the bloatware from it's original carrier (this phone was carrier unlocked when bought) I decided to clean up a bit.
I ended up cleaning a lot of stuff that I simply didn't use from a \custapp\ folder in there.
Thing is, a day latter I got a notification of a firmware update and I just said yes.
The said update failed, complaining it seems about the lack of some of the deleted bloatware.
Now, here's when the lack of thinking shows.
Wondering about it, I decided to look around options and found the factory reset.
Being a new and mostly empty phone, I did it (wiped clean the sd too),
And there, it went all into hell!
After reboot, it can't get my wireless anymore (have to use a static ip workaround for it...)
Root Checker says it's not properly rooted (using the same rooting technique as the first time doesn't fix it)
superuser still seems to be working, altho it crashes now and then with some errors about permissions.
also, can't get BusyBox working because it says there's no su binary and I can't download an update for it.
In short, I guess I need to get this phone to it's basics, if possible unbranded.
I don't really know what I need for that, but here I am, reaching at you that might help
I guess I need a stock rom and a way to flash it.
I'd appreciate a lot any help on getting whatever it is needed.
*cheers
root alcatel ot 983
ahkronn said:
Hello, and hope this is the right place to post this.
So, without any knowledge about all this smatphone/android stuff, I finally got one by a really good price. An ot-983.
Some friends conviced me to root it. I found a way to do it and noticing all the bloatware from it's original carrier (this phone was carrier unlocked when bought) I decided to clean up a bit.
I ended up cleaning a lot of stuff that I simply didn't use from a \custapp\ folder in there.
Thing is, a day latter I got a notification of a firmware update and I just said yes.
The said update failed, complaining it seems about the lack of some of the deleted bloatware.
Now, here's when the lack of thinking shows.
Wondering about it, I decided to look around options and found the factory reset.
Being a new and mostly empty phone, I did it (wiped clean the sd too),
And there, it went all into hell!
After reboot, it can't get my wireless anymore (have to use a static ip workaround for it...)
Root Checker says it's not properly rooted (using the same rooting technique as the first time doesn't fix it)
superuser still seems to be working, altho it crashes now and then with some errors about permissions.
also, can't get BusyBox working because it says there's no su binary and I can't download an update for it.
In short, I guess I need to get this phone to it's basics, if possible unbranded.
I don't really know what I need for that, but here I am, reaching at you that might help
I guess I need a stock rom and a way to flash it.
I'd appreciate a lot any help on getting whatever it is needed.
*cheers
Click to expand...
Click to collapse
pls i need you to explain to me carefully , step by step how you rooted the alcatel ot 983 , pls i have searching for the past weeks on google without results , pls help me , pls explain carefully , thanks in advance , i will be so happy if you help , thanks again in advance
mohamm said:
pls i need you to explain to me carefully , step by step how you rooted the alcatel ot 983 , pls i have searching for the past weeks on google without results , pls help me , pls explain carefully , thanks in advance , i will be so happy if you help , thanks again in advance
Click to expand...
Click to collapse
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.
I need original stock alcatel ot 983 rom
hi guys
I bricked my ot 983 after flashing with different alcatel models rom
can some one please give me a copy of original stock rom for alcatel one touch 983
please
my email [email protected]
maybe your handheld is a brand new and nobody mod it yet
be patient bro and keep searching in google with any keyword
help me make tutorial on youtube
ahkronn said:
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.
Click to expand...
Click to collapse
bro i dont know much about android stuff , but pls can you make a tutorial on youtube like this you can help me and millions out there for rooting the phone , ps help and thanks so much in advance
ahkronn said:
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.
Click to expand...
Click to collapse
Where did you get the upgrade from ?
My story is like this: rooted, uninstalled some bloat from system and after a factory reset I'm stuck in the initial setup wizard (after completing almost all stages from setup it crashes at the end, after connecting at the google account - tryed to ignore that step but either way it crashes). Fastboot works but adb don't.
I do have another identical phone Alcatel One Touch OT-983 but with no root, with no modifications. Is there a way to backup the original/stock image and flash it over the malfunctioning one and restore it??
I tried with the proprietary upgrade tool from Alcatel but no succes as it close saying I don't need an upgrade because it's the last version of software installed in my phone. I thought even to broke intentionally the rom but I'm afraid that the upgrade utility from Alcatel will let me down, as I read that another users didn't managed to complete successfully the upgrading process. Is there a way to trick the system that has a previous version of Android?
Thank you for taking your time to read this and hope someone has an idea to solve our problem.
Have a nice day guys, you can contact me at puiocku at gmail dot com.
Have someone this stock rom (for Alcatel One Touch 983 (Valencia)) ???
Here is a Alcatel OT-983 rom, not sure which country it is from: https://www.dropbox.com/s/g2ljtrpqru3uihm/rom 983.zip?m
Here is my o2 uk backup rom: http://www.mirrorcreator.com/files/C4VEKHEI/OT-983_backup_uk.rar_links
this .zip file contains the boot.img, system.img and recovery.img
Someone needs to create a clockwork mod recovery for our phones now.
here is the sourcecode for this phone: http://www.mirrorcreator.com/files/85KDRTYP/OT_983_20130103.7z_links
Can't get to recovery
I have a bricked rooted OT 983, by error i installed a ZTE Blade's CM9 ROM and now i can't get my phone to recovery by using ADB that is the only way, i have downloaded the stock ROM but i don't know how to install it. :crying: PLEASE HELP!!!!!!!!!!!!!!!!!!!!
i done the same
Please help!! my phone is stuck on
jrdsetupwizard has stopped
cant get past setup screen
Possible solution for getting back original ROM on "stuck" phone
ryanraven said:
i done the same
Please help!! my phone is stuck on
jrdsetupwizard has stopped
cant get past setup screen
Click to expand...
Click to collapse
I recently "semi bricked", if my Alcatel OT983, if that's possible. It would not boot fully and got stuck on the "jrdsetupwizard has stopped" screen.
Here's what I did. The issue with getting the Alcatel One Touch Upgrade software to work appears to be getting the correct USB Driver installed. There are a number of potential USB drivers. This phone needs the driver in the Alcatel One Touch Upgrade. The stock Windows one or the one used for rooting the phone using instructions from the errorsoft website from the oneofgod will not work with this upgrade procedure.
1. Download the Alcatel One Touch Upgrade software and install on your machine. Open up the folder where the software is installed.
Look inside the folder that is called USB Driver and look inside the appropriate folder for your type of Windows machine 64bit or 32bit (x86) and install that driver for USB - that is the correct one for the upgrade
2. Run the upgrade software whilst connected to the internet. Connect your phone when it is off. You should just get the Android icon i.e. not charging or anything else. The icon should just stay there all the time the process takes place.
3. The upgrade will download. It's when the process gets to about 70% that the phone the starts upgrading. It will take a few moments but when it starts progressing into the late 70s and 80s you should be well on the way. At least that's how it went for me and I got my phone back!
Hope this helps.
to Hajj_3 :
Tanks for share the ROM.. I need it to recover my friends phone..
I just got this phone, not looking to root it yet as theres no option for a custom rom yet.
didnt want to start a new thread as theres not really any section for this phone yet.
Everything was fine until i installed the firmware update. Now applications cannot access the mic. Some complain about it being in use by another app. others like video editor or sound recorder will record, but the video recorder there is no file, and sound recorder crashes when you hit stop.
Alcatels website is useless, wasnt working yesterday, today it is but cant find any contact details incase its a bug in there firmware. Everything works fine except for that. Which is annoying because i use RTA software and now it doesnt as it cant access the mic.
any ideas?
Hi guys,
I've rooted my phone with abd and udpate.zip a long time ago, and it was fine till some days ago it stopped from receiving calls and the home button does nothing when pressed, although in recovey mode it works.
I've done a hard reset, reflashed the recovery.img, system.img and boot.img I've found in this post with fasboot, but did not solve the problem.
I've tried a firmware update with Alcatel's own software but it just keeps saying my firmware is updated already. I've also tried to edit the proinfo file, but I don't know what to change in the file. You can see more about that method here: http://forum.gsmhosting.com/vbb/9772370-post8.html
My guess is that the files that are corrupted and preventing me from receiving calls are somewhere else than those img's I've flashed. Has anybody got a FULL backup of his rom (e.g. Rom Manager) so I can recover the phone completely?
Thanks!
upgrade software
bussand said:
I recently "semi bricked", if my Alcatel OT983, if that's possible. It would not boot fully and got stuck on the "jrdsetupwizard has stopped" screen.
Here's what I did. The issue with getting the Alcatel One Touch Upgrade software to work appears to be getting the correct USB Driver installed. There are a number of potential USB drivers. This phone needs the driver in the Alcatel One Touch Upgrade. The stock Windows one or the one used for rooting the phone using instructions from the errorsoft website from the oneofgod will not work with this upgrade procedure.
1. Download the Alcatel One Touch Upgrade software and install on your machine. Open up the folder where the software is installed.
Look inside the folder that is called USB Driver and look inside the appropriate folder for your type of Windows machine 64bit or 32bit (x86) and install that driver for USB - that is the correct one for the upgrade
2. Run the upgrade software whilst connected to the internet. Connect your phone when it is off. You should just get the Android icon i.e. not charging or anything else. The icon should just stay there all the time the process takes place.
3. The upgrade will download. It's when the process gets to about 70% that the phone the starts upgrading. It will take a few moments but when it starts progressing into the late 70s and 80s you should be well on the way. At least that's how it went for me and I got my phone back!
Hope this helps.
Click to expand...
Click to collapse
The problem is, the upgrade software link doesn't work anymore :\.
ht tp: // ww w1. alcatelonetouch.com/global-en/ support/download/one_touch_ 983.html
(remove of spaces, im a new user so they won't let me post one)
Is there anyway someone can find a link for it because i have been searching for ages and haven't found one.
http://www.alcatel-mobilephones.com/global-en/support/download/one_touch_983.html
Hi All/experts,
I bought this phone 2 months back after lot of rooting efforts finally was able to root it. However I think unknowingly I deleted some apps from /system/app while trying to cleanup unwanted applications. Now my phone does not show any cell connection(its a dual sim phone) does not even show the SIM signal bars on the top right corner. when I look at the phone information about baseband it reports "unknown". I tried using various phone.apk but non of them worked and I would like to know how I can solve this issue and make my phone alive. My phone boots properly , all other installed apps work, I get a wifi connection and can use Google Play.
Can someone help me by providing the rom dump for this phone or a APK dump for this phone? The phone shows that its running 4.0.4 however its a 2.3.6 base I believe.
Ok to even flash a custom rom as long as its sure to work
Again the model is Telsda T9555 and it has a mediatek MTK6515 processor with 256MB RAM and 256MB ROM.
Thanks
PG
prago said:
Hi All/experts,
I bought this phone 2 months back after lot of rooting efforts finally was able to root it. However I think unknowingly I deleted some apps from /system/app while trying to cleanup unwanted applications. Now my phone does not show any cell connection(its a dual sim phone) does not even show the SIM signal bars on the top right corner. when I look at the phone information about baseband it reports "unknown". I tried using various phone.apk but non of them worked and I would like to know how I can solve this issue and make my phone alive. My phone boots properly , all other installed apps work, I get a wifi connection and can use Google Play.
Can someone help me by providing the rom dump for this phone or a APK dump for this phone? The phone shows that its running 4.0.4 however its a 2.3.6 base I believe.
Ok to even flash a custom rom as long as its sure to work
Again the model is Telsda T9555 and it has a mediatek MTK6515 processor with 256MB RAM and 256MB ROM.
Thanks
PG
Click to expand...
Click to collapse
Hello can anyone give me a ROM dump for this.. Thanks
prago said:
Hi All/experts,
I bought this phone 2 months back after lot of rooting efforts finally was able to root it. However I think unknowingly I deleted some apps from /system/app while trying to cleanup unwanted applications. Now my phone does not show any cell connection(its a dual sim phone) does not even show the SIM signal bars on the top right corner. when I look at the phone information about baseband it reports "unknown". I tried using various phone.apk but non of them worked and I would like to know how I can solve this issue and make my phone alive. My phone boots properly , all other installed apps work, I get a wifi connection and can use Google Play.
Can someone help me by providing the rom dump for this phone or a APK dump for this phone? The phone shows that its running 4.0.4 however its a 2.3.6 base I believe.
Ok to even flash a custom rom as long as its sure to work
Again the model is Telsda T9555 and it has a mediatek MTK6515 processor with 256MB RAM and 256MB ROM.
Thanks
PG
Click to expand...
Click to collapse
Hello,I found your post about rooting Telsda phone. I would like to ask You, how did You done it? I have Telsda T8520 bought in PRC last week, I'm trying to install Google Play subsystem, but to be honest I don't know how... Can You help me? Simply installing google play apk doesn't help. Phone seems to be rooted, but some things are still in chinese, not english, so I'm not quite sure. Explaining your rooting and google installing procedure might help me. Thanks in advance.
zbyszek45 said:
Hello,I found your post about rooting Telsda phone. I would like to ask You, how did You done it? I have Telsda T8520 bought in PRC last week, I'm trying to install Google Play subsystem, but to be honest I don't know how... Can You help me? Simply installing google play apk doesn't help. Phone seems to be rooted, but some things are still in chinese, not english, so I'm not quite sure. Explaining your rooting and google installing procedure might help me. Thanks in advance.
Click to expand...
Click to collapse
to root the phone its simple, extract the boot image using mtkdroidtools and then decompile the image file. edit I think the build.prop and set ro.secure = 0 and ro.debugging =1 (I am no expert but this is what I did). repack the boot image and flash it back to the phone. Then use unlockroot and thats it you get your phone rooted.
However since your phone is rooted as you say, installing google play needs installing the below apk
1. GoogleServicesFramework-signed
2. OneTimeInitializer-signed
3. SetupWizard-signed
4. com.android.vending-3.1.3-signed
I have attached the zip here in case you want to give it a try. This worked for me, I dont guarantee it will work for you !!!
if I helped you ... can you provide me a full rom dump of your phone , I will try to flash it and since its the same manufacturer I hope it will work Right now I got my phone back from completly bricked by keeping the boot image and then flashing a system image from different phone. So my works for calls ,sms,gprs ...etc but fails on wifi and bluetooth.
USE AT YOUR OWN RISK , I AM NOT RESPONSIBLE IF YOUR PHONE GOES BAD
braindia said:
to root the phone its simple, extract the boot image using mtkdroidtools and then decompile the image file. edit I think the build.prop and set ro.secure = 0 and ro.debugging =1 (I am no expert but this is what I did). repack the boot image and flash it back to the phone. Then use unlockroot and thats it you get your phone rooted.
However since your phone is rooted as you say, installing google play needs installing the below apk
1. GoogleServicesFramework-signed
2. OneTimeInitializer-signed
3. SetupWizard-signed
4. com.android.vending-3.1.3-signed
I have attached the zip here in case you want to give it a try. This worked for me, I dont guarantee it will work for you !!!
if I helped you ... can you provide me a full rom dump of your phone , I will try to flash it and since its the same manufacturer I hope it will work Right now I got my phone back from completly bricked by keeping the boot image and then flashing a system image from different phone. So my works for calls ,sms,gprs ...etc but fails on wifi and bluetooth.
USE AT YOUR OWN RISK , I AM NOT RESPONSIBLE IF YOUR PHONE GOES BAD
Click to expand...
Click to collapse
thanks, but what driver for windows have you used? my mtkdroidstools still shows the device isnt revealed. I've tried lot of different drivers (even generic), without success so far.
your problem could be driver installation.... get usbdview and run it as admin. delete all mediatek related entries, reconnect the phone for flashing and then let the system do the installation of the drivers again. This is a very common issue with mediatek preloader Vcom drivers atleast as per my experience but I dont know if others too have faced this. when I have a problem I use the above porcess to make it work again.
braindia said:
your problem could be driver installation.... get usbdview and run it as admin. delete all mediatek related entries, reconnect the phone for flashing and then let the system do the installation of the drivers again. This is a very common issue with mediatek preloader Vcom drivers atleast as per my experience but I dont know if others too have faced this. when I have a problem I use the above porcess to make it work again.
Click to expand...
Click to collapse
still same issue, maybe I'm doing something wrong, but I'm still not able to mount any functional drivers for this phone (debugging mode on, tried VCOM, mediatek too)
zbyszek45 said:
still same issue, maybe I'm doing something wrong, but I'm still not able to mount any functional drivers for this phone (debugging mode on, tried VCOM, mediatek too)
Click to expand...
Click to collapse
I dont understand what you are trying to do . If you are trying to flash the phone then you need to run sp flash tools, remove the phone battery.. start the download or the readback in sp flash tool .. put the battery back into the phone and connect the phone to your computer. This way your Vcom drivers should get installed.
Again before doing all this its advisable to do delete the existing drivers on your PC using USBDview
There is a tutorial on how to use SP flash tools check it on the internet. As a suggestion to avoid any risk of messing your phone just do a readback instead of a download.
Goodluck !!! your phone , your risk if something above fails (-:
T9555 ROM found
braindia said:
I dont understand what you are trying to do . If you are trying to flash the phone then you need to run sp flash tools, remove the phone battery.. start the download or the readback in sp flash tool .. put the battery back into the phone and connect the phone to your computer. This way your Vcom drivers should get installed.
Again before doing all this its advisable to do delete the existing drivers on your PC using USBDview
There is a tutorial on how to use SP flash tools check it on the internet. As a suggestion to avoid any risk of messing your phone just do a readback instead of a download.
Goodluck !!! your phone , your risk if something above fails (-:
Click to expand...
Click to collapse
Update - T9555 ROM
After months of search I found the ROM. Happy to help if someone needs it.
It was succeeded to stitch Telsda t9555? Google market and multi languages interests.
draiverss said:
It was succeeded to stitch Telsda t9555? Google market and multi languages interests.
Click to expand...
Click to collapse
yes...
braindia said:
Update - T9555 ROM
After months of search I found the ROM. Happy to help if someone needs it.
Click to expand...
Click to collapse
good day
I need a rom, please help, your firmware contains many languages?
alibom said:
good day
I need a rom, please help, your firmware contains many languages?
Click to expand...
Click to collapse
ok I will send you a link to download
Telsda t9555
alibom said:
good day
I need a rom, please help, your firmware contains many languages?
Click to expand...
Click to collapse
I need a rom for Telsda T9555 china mobile. pls send me a link for download it.
Telsda 9555
I need rom for telesda T9555.Pls help me.
hi, first time poster here.
i have searched exhaustively on this site and google for hours but, couldn't find an answer to my question. desperately in need of some help please
i recently purchased a Jiayu G3 and installed JellyBean. turns out Wi-fi and bluetooth now don't work due to incompatibility of my older version phone model. i found an alternative rom to install on the forum here with instructions but, i am having a problem...
apparently i need to install mobileuncle MKT tools so i can do recovery update and use clockwork mod (CWM) to install the new rom.
problem is i can't download mobileuncle tools. my wi-fi isn't working and i cant download it via my mobile network. i get error 927 when i try to download it via the play store. this could be due to a really poor connection speed, for some reason. after 10 minutes of trying to download the 1.02mb file it eventually fails.
would it be possible to download the mobileuncle tools via my laptop and then put it on my phone on my SD card? i havent been able to find anywhere to download it online and then i am not sure where or which folder i would put it in. if this works, does anyone know please?
or perhaps there is another way i can install a rom? to be honest i would be quite happy to just restore the stock ICS. i just want to start using my new phone...
thanks in advance :good:
hi, just to provide an update, i have managed to install mobileuncle tools but the flash recovery does not work
i have been following the instructions from here
watch?v=yuXdOjXQwGo[/url] (i can't post links yet according to forum rules but that is a youtube link)
instead when i reboot in recovery mode i just get the picture of the little android guy on his back with his front open and an exclamation mark displayed.
i know this is tedious, but please, any help would be great. i'm stuck
i tried following the instructions on this page http://forum.xda-developers.com/showthread.php?t=2163707
i managed to do it all or so i thought. after unzipping the rom i restarted the phone but it gets stuck on a CyanogenMod logo. after half an hour of the loading ring going round i don't get any where. i have tried doing it in safe mode but same problem
please someone, help
taking to myself here
well I have managed to get past the screen. however, the rom i used does not work still does not allow the wifi and bluetooth to work.
does anyone know where i can download the original ICS stock rom for the Jiayu G3?
First off, I'd like to say thank you in advance for any help I receive. I'm not an expert by any means at this - I would consider myself amateur at best!
I'm fairly desperate at this point - I've been trying for days to solve this myself by following various tutorials and forums, but have had no luck, so I'm really hoping someone here is willing to help me out!
What I've been trying to do:
Install official Google 4.2.2 Jellybean on HTC One 802w Dual sim model.
Current State of phone:
The phone is currently rooted and has clockwork mod installed and SuperSu 1.65 and has moonshine installed. However, I've had absolutely no luck in finding or flashing a 4.2.2 ROM onto the phone. I cannot find a ROM to match the phone - all the zips I download from this thread - http://forum.xda-developers.com/showpost.php?p=43177948&postcount=369 say that they're corrupted and can't be copied to the phone or extracted. I find this really weird as I've checked the MD5 with HashCalc and they match. I have searched around other sites but cannot for the life of me find a ROM that works.
If it isn't possible to install the official Google ROM, I would be ecstatic if someone were to guide me through the process of restoring the phone to a complete factory state. I downloaded a supposed recovery img file for this phone, however it doesn't seem to work, so I flashed clockwork back on instead.
If anyone can help me with either of these things, I would be EXTREMELY grateful - I've reached a point where I'm at a complete loss on what to do.
Thank you very much for your time
scottnz said:
First off, I'd like to say thank you in advance for any help I receive. I'm not an expert by any means at this - I would consider myself amateur at best!
I'm fairly desperate at this point - I've been trying for days to solve this myself by following various tutorials and forums, but have had no luck, so I'm really hoping someone here is willing to help me out!
What I've been trying to do:
Install official Google 4.2.2 Jellybean on HTC One 802w Dual sim model.
Current State of phone:
The phone is currently rooted and has clockwork mod installed and SuperSu 1.65 and has moonshine installed. However, I've had absolutely no luck in finding or flashing a 4.2.2 ROM onto the phone. I cannot find a ROM to match the phone - all the zips I download from this thread - http://forum.xda-developers.com/showpost.php?p=43177948&postcount=369 say that they're corrupted and can't be copied to the phone or extracted. I find this really weird as I've checked the MD5 with HashCalc and they match. I have searched around other sites but cannot for the life of me find a ROM that works.
If it isn't possible to install the official Google ROM, I would be ecstatic if someone were to guide me through the process of restoring the phone to a complete factory state. I downloaded a supposed recovery img file for this phone, however it doesn't seem to work, so I flashed clockwork back on instead.
If anyone can help me with either of these things, I would be EXTREMELY grateful - I've reached a point where I'm at a complete loss on what to do.
Thank you very much for your time
Click to expand...
Click to collapse
Scott
you wont be able to flash a stock Google Rom onto an 802W.
I was just looking for a way to do the same!
scottnz said:
First off, I'd like to say thank you in advance for any help I receive. I'm not an expert by any means at this - I would consider myself amateur at best!
I'm fairly desperate at this point - I've been trying for days to solve this myself by following various tutorials and forums, but have had no luck, so I'm really hoping someone here is willing to help me out!
What I've been trying to do:
Install official Google 4.2.2 Jellybean on HTC One 802w Dual sim model.
Current State of phone:
The phone is currently rooted and has clockwork mod installed and SuperSu 1.65 and has moonshine installed. However, I've had absolutely no luck in finding or flashing a 4.2.2 ROM onto the phone. I cannot find a ROM to match the phone - all the zips I download from this thread - http://forum.xda-developers.com/showpost.php?p=43177948&postcount=369 say that they're corrupted and can't be copied to the phone or extracted. I find this really weird as I've checked the MD5 with HashCalc and they match. I have searched around other sites but cannot for the life of me find a ROM that works.
If it isn't possible to install the official Google ROM, I would be ecstatic if someone were to guide me through the process of restoring the phone to a complete factory state. I downloaded a supposed recovery img file for this phone, however it doesn't seem to work, so I flashed clockwork back on instead.
If anyone can help me with either of these things, I would be EXTREMELY grateful - I've reached a point where I'm at a complete loss on what to do.
Thank you very much for your time
Click to expand...
Click to collapse
Dear Scott,
I was looking for a way to install a Google Play Edition on my HTC One 802w when I stumbled upon your post.
Although I cannot help you with your primary goal, as I have not found a way to do it myself, I think you may have a chance to get your phone back to work installing an alternative ROM.
I have a MaximusHD (http://llabtoofer.com/2013/07/23/htc-one-dual-sim-maximushd/) running on my phone, and it is pretty customizable; but it is not a stock ROM.
I hope my advice will be of some use for you.
If you find a way to flash a Google Edition ROM on the 802w, please, post it for us here.
Good luck!
Me too, looking for alternative custom ROM for this model. I had to buy this model which comes from China Unicom which is not sold in my country (Malaysia) because i really need a good dual sim phone. I read thru the Maximus HD had some issues with dropped calls and Bluetooth connection sometimes not stable. Is there other custom ROM out there that I can try? Really hate all these chinese apps taking up space on this phone.
custom rom option 802w
petrofsky77 said:
Me too, looking for alternative custom ROM for this model. I had to buy this model which comes from China Unicom which is not sold in my country (Malaysia) because i really need a good dual sim phone. I read thru the Maximus HD had some issues with dropped calls and Bluetooth connection sometimes not stable. Is there other custom ROM out there that I can try? Really hate all these chinese apps taking up space on this phone.
Click to expand...
Click to collapse
Hi, I talked to to Venom Development Team... when there are enough people interested they will support the asian dual sim Version with their famous Viper one Rom...
so check it out and vote...
http://forum.xda-developers.com/showthread.php?t=2577724
Hello everyone,
i've run into a big problem that i can't the solution for.
I've wanted to unroot phone so i can delete some random apps which were preinstalled, like traffic manager and so. So i found somewhere link for rooting and unlocking bootloader. I rooted the phone and deleted the app Traffic Manager, but i also think i accidentely unlocked bootloader which since then caused BOOT LOOP.
Nothing woudn't work, except VOLUME + - and power button, which would force firmware install from micro sd card. I was spending 2 days finding my version for 2.3.6, and it was b896 or b892. I coudn't find any of those 2, so i tried the B952 for ICS (4.0.3 android system), and it worked somehow.
But now the problem is touchscreen in that system won''t work at all (touchscreen is working in general, i can see that by the light dimm), and when i go in recovery mode there is option to update touchscreen firmware ?? I can't seem to find anyone on internet who had that problem or needed that update for touchscreen. How to fix this issue?
Update: I found that the original rom is this: HUAWEI_Ascend_G300_firmware(U8815_Android_2.3_V100 R001C00B892CUSTSRBC128D001_Serbia-Telenor_05011ATB)
But problem is i still can't find any working links, does anyone have it by accident ?
sne me imie number of phone in pm so i can find u exect firmware for ur phone.
asadnow2k said:
sne me imie number of phone in pm so i can find u exect firmware for ur phone.
Click to expand...
Click to collapse
I've sent it.
Bump, still need help.
Bump.
Bump.
Any help ?
Bump.
Bump.
Bump, i've found it's version: HUAWEI_Ascend_G300_firmware(U8815_Android_2.3_V100 R001C00B892CUSTSRBC128D001_Serbia-Telenor_05011ATB)
But i can't seem to find any working links on internet, does anyone have this rom?