Hi,
I tried installing with adb (adb install) but i keep getting this error message:
"Failure Install Parse Failed Unexpected Exception"
I tried removing the program (adb uninstall) all the time it says: "Failure"
I dunno what to do any help will be apreciated!
please more ditails..
your phone must be in normal mode,
and you must "cd" to the directory of the file you want to install. and write the name of file corectly with.apk.
i dont tnink the should be any problems
Hello Guys,
I have a 2.3.5 Andoid on a Samsung Galaxy S2 (rooted XWKi8).
Basically, I couldn't Flash CWM Recovery from my ROM Manager. So I tried to do it by uploading zImage through Heimdall from the following method :
wiki (dot) cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide
The problem is :
- if I try to do it on ubuntu, I get this error on the terminal :
Initialising connection...
Detecting device...
libusb couldn't open USB device /dev/bus/usb/001/008: Permission denied.
libusb requires write access to USB device nodes.
ERROR: Failed to access device. libusb error: -3
- and if I try it on Win7, the zadig.exe doesn't install the drivers for some reasons, ERROR: Driver installation Failed !
Can I get any assistance on this matter please, I'm desperate to get CyanogenMode on my S2 i9100.
Please tell me if I am doing something wrong or if I am missing something ?
Appreciate you help !
OklanMayor said:
Hello Guys,
I have a 2.3.5 Andoid on a Samsung Galaxy S2 (rooted XWKi8).
Basically, I couldn't Flash CWM Recovery from my ROM Manager. So I tried to do it by uploading zImage through Heimdall from the following method :
wiki (dot) cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide
The problem is :
- if I try to do it on ubuntu, I get this error on the terminal :
Initialising connection...
Detecting device...
libusb couldn't open USB device /dev/bus/usb/001/008: Permission denied.
libusb requires write access to USB device nodes.
ERROR: Failed to access device. libusb error: -3
- and if I try it on Win7, the zadig.exe doesn't install the drivers for some reasons, ERROR: Driver installation Failed !
Can I get any assistance on this matter please, I'm desperate to get CyanogenMode on my S2 i9100.
Please tell me if I am doing something wrong or if I am missing something ?
Appreciate you help !
Click to expand...
Click to collapse
Go to this link: http://forum.xda-developers.com/showthread.php?t=1332103
read the entire thing and follow the directions and you will have no problems.
Model - Sony xperia l - C 2014
I wanted to flash CM12 to my device. I followed the instructions on Cyanogenmod site.
I enabled USB debugging mode.
I unlocked the bootloader (as per the instructions on sony)
I'm using a linux machine. I've installed adb and fastboot tools.
I havent backed up my bootloader or system (but ive taken data backup before starting the process)
1) When i try to flash the CM ROM using adb sideload method, i get the error..
this package is for device c2105 c2104 c2105 c2104 taoshan this device is .
2) If i try to use fastboot method to flash new recovery, using the folowing command
#fastboot flash recovery cm-12-20150906-NIGHTLY-taoshan-recovery.img
i get the error..
sending 'recovery' (9702 KB)...
OKAY [ 0.308s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.310s
Now my phone is unable to boot normally. it gets stuck at recovery.
This is the first time i've tried to flash a new ROM. Any suggestion would be greatly appreciated.
Thank you
abhishek.karvi said:
Model - Sony xperia l - C 2014
I wanted to flash CM12 to my device. I followed the instructions on Cyanogenmod site.
I enabled USB debugging mode.
I unlocked the bootloader (as per the instructions on sony)
I'm using a linux machine. I've installed adb and fastboot tools.
I havent backed up my bootloader or system (but ive taken data backup before starting the process)
1) When i try to flash the CM ROM using adb sideload method, i get the error..
this package is for device c2105 c2104 c2105 c2104 taoshan this device is .
2) If i try to use fastboot method to flash new recovery, using the folowing command
#fastboot flash recovery cm-12-20150906-NIGHTLY-taoshan-recovery.img
i get the error..
sending 'recovery' (9702 KB)...
OKAY [ 0.308s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.310s
Now my phone is unable to boot normally. it gets stuck at recovery.
This is the first time i've tried to flash a new ROM. Any suggestion would be greatly appreciated.
Thank you
Click to expand...
Click to collapse
1.boot to recovery
2.connect to pc
3. use this commands in adb:
adb shell
setprop ro.product.device taoshan
4. flash cm12 or any other rom for taoshan
do this all while in same session (dont reboot after the terminal command or it will be gone)
Sent from my mint using XDA Free mobile app
SdtBarbarossa said:
1.boot to recovery
2.connect to pc
3. use this commands in adb:
adb shell
setprop ro.product.device taoshan
4. flash cm12 or any other rom for taoshan
do this all while in same session (dont reboot after the terminal command or it will be gone)
Sent from my mint using XDA Free mobile app
Click to expand...
Click to collapse
Thank you for the reply SdtBarbarossa .
I've done steps 1,2.
On 3rd step, when i give command #adb shell , im getting error....
error: device unauthorized. Please check the configuration dialog on your device.
Now since the device is stuck at recovery and does not boot, i cant re-authorize my computer from my phone.
I'd like to mention that i started fooling around with my ROM on a different workstation and im trying to fix this on a different workstation right now... having said that, do i need to retry the mentioned steps from the previous computer?
Thanks again.
abhishek.karvi said:
Thank you for the reply SdtBarbarossa .
I've done steps 1,2.
On 3rd step, when i give command #adb shell , im getting error....
error: device unauthorized. Please check the configuration dialog on your device.
Now since the device is stuck at recovery and does not boot, i cant re-authorize my computer from my phone.
I'd like to mention that i started fooling around with my ROM on a different workstation and im trying to fix this on a different workstation right now... having said that, do i need to retry the mentioned steps from the previous computer?
Thanks again.
Click to expand...
Click to collapse
Thats bad ;-( flash aromafm and use the inbuild terminal!
Then you need only the setprop command
Sent from my mint using XDA Free mobile app
SdtBarbarossa said:
Thats bad ;-( flash aromafm and use the inbuild terminal!
Then you need only the setprop command
Sent from my mint using XDA Free mobile app
Click to expand...
Click to collapse
ive downloaded aromafm. It says 1) copy the file to phones sdcard and 2) boot into recovery and select "install from zip"
The problem is :
1) I'm unable to copy anything to phone, since the phone is stuck at recovery and MTP is not working when i connect it to USB
2) My recovery doesnt have option "install from zip".... (recovery screen says - Cyanogen recovery)
Can i forcibly push the file to my sd card using flashtool or adb? or will keeping the file on external sd card work too? if so, how do i proceed?
Also i forgot to mention earlier that when i give the command # adb devices, it says unauthorised.
But im able to use the command #adb sideload *.zip (although it fails)
When i try the sideload method..flash starts but fails with the error..
On my computers terminal it says
Total xfer: 1.00x
On my phone the error is
this package is for device c2105 c2104 c2105 c2104 taoshan this device is .
E: Failed to install /sideload/package.zip
.
.
Installation aborted
I have downloaded the zip file from cyanogenmod official site, and im sure that ive taken the correct file for my device, and have checked that the hash mathces.
Thnx again.
abhishek.karvi said:
ive downloaded aromafm. It says 1) copy the file to phones sdcard and 2) boot into recovery and select "install from zip"
The problem is :
1) I'm unable to copy anything to phone, since the phone is stuck at recovery and MTP is not working when i connect it to USB
2) My recovery doesnt have option "install from zip".... (recovery screen says - Cyanogen recovery)
Can i forcibly push the file to my sd card using flashtool or adb? or will keeping the file on external sd card work too? if so, how do i proceed?
Also i forgot to mention earlier that when i give the command # adb devices, it says unauthorised.
But im able to use the command #adb sideload *.zip (although it fails)
When i try the sideload method..flash starts but fails with the error..
On my computers terminal it says
Total xfer: 1.00x
On my phone the error is
this package is for device c2105 c2104 c2105 c2104 taoshan this device is .
E: Failed to install /sideload/package.zip
.
.
Installation aborted
I have downloaded the zip file from cyanogenmod official site, and im sure that ive taken the correct file for my device, and have checked that the hash mathces.
Thnx again.
Click to expand...
Click to collapse
Copy the file to external sd
Sent from my mint using XDA Free mobile app
SdtBarbarossa said:
Copy the file to external sd
Sent from my mint using XDA Free mobile app
Click to expand...
Click to collapse
Even if I copy the file to external sd card, I'm unable to install it from there since I don't get a "install" option in recovery.
Its been too long so I went to the Sony store and got it fixed.
Anyways, Thanks for your help SdtBarbarossa, i appreciate it.
Once again, thank you
abhishek.karvi said:
Model - Sony xperia l - C 2014
I wanted to flash CM12 to my device. I followed the instructions on Cyanogenmod site.
I enabled USB debugging mode.
I unlocked the bootloader (as per the instructions on sony)
I'm using a linux machine. I've installed adb and fastboot tools.
I havent backed up my bootloader or system (but ive taken data backup before starting the process)
1) When i try to flash the CM ROM using adb sideload method, i get the error..
this package is for device c2105 c2104 c2105 c2104 taoshan this device is .
2) If i try to use fastboot method to flash new recovery, using the folowing command
#fastboot flash recovery cm-12-20150906-NIGHTLY-taoshan-recovery.img
i get the error..
sending 'recovery' (9702 KB)...
OKAY [ 0.308s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.310s
Now my phone is unable to boot normally. it gets stuck at recovery.
This is the first time i've tried to flash a new ROM. Any suggestion would be greatly appreciated.
Thank you
Click to expand...
Click to collapse
Try this command for installing recovery: " fastboot flash boot recovery.img"
change "recovery" word with your downloaded recovery file name.
@SdtBarbarossa
Hi, I have run into the same problem as OP, and have been trying to install aromafm but get the following output:
Code:
E: Cannot load volume /misc!
Finding update package...
Opening update package...
Verifying update package...
E: footer is wrong
E: signature verification failed
Installation aborted.
E: Cannot load volume /misc!
I have tried several aroma zips but its the same with all of them
I have checked and indeed the device ID is set to "".
Alhaj said:
Try this command for installing recovery: " fastboot flash boot recovery.img"
change "recovery" word with your downloaded recovery file name.
Click to expand...
Click to collapse
Ok, I was afraid to try this but finally dared, and it fixed my situation!
I ran it, and unlike trying to flash to recovery, flashing to boot proved successful (no "command not allowed" message). Then unplugged USB, and phone booted to recovery (I highly recommend TWRP), from where I installed the system and additional apps (surprisingly, without errors about device ID or incorrect signatures), and afterwards booted into system flawlessly.
Thanks!
severoraz said:
Ok, I was afraid to try this but finally dared, and it fixed my situation!
I ran it, and unlike trying to flash to recovery, flashing to boot proved successful (no "command not allowed" message). Then unplugged USB, and phone booted to recovery (I highly recommend TWRP), from where I installed the system and additional apps (surprisingly, without errors about device ID or incorrect signatures), and afterwards booted into system flawlessly.
Thanks!
Click to expand...
Click to collapse
Well its been a long time since i last had the time to pick up my XL ... but nice to hear that the fix still worked if you have any other question send me a pn since im no longer monitoring these threads ( due to missing time ;-( )
SdtBarbarossa said:
Well its been a long time since i last had the time to pick up my XL ... but nice to hear that the fix still worked if you have any other question send me a pn since im no longer monitoring these threads ( due to missing time ;-( )
Click to expand...
Click to collapse
Thanks! I picked mine up as a backup phone but this community has kept it running smooth
Hello,
So I've just read this in another thread:
"Open a command window and run the following command from the proper location:
fastboot boot path/to/twrp.img
This will temporarily boot TWRP on your device. Use ADB or MTP to transfer the zip onto your device."
So far, my understanding that I can't install twrp when using android Q, but can I follow the above instructions to temporarily boot into twrp in order to make a backup?
I know Google have changed some partitioning stuff with the pixels so I don't want to screw anything up is all
Many thanks
mofaker33 said:
C:\Users\X\Desktop\platform-tools_r29.0.6-windows\platform-tools>fastboot boot C:\Users\X\Desktop\platform-tools_r29.0.6windows\platform-tools\twrp.img
fastboot: error: cannot load 'C:\Users\x\Desktop\platform-tools_r29.0.6-windows\platform-tools\twrp.img': too short
C:\Users\x\Desktop\platform-tools_r29.0.6-windows\platform-tools>fastboot boot twrp.img
fastboot: error: cannot load 'twrp.img': too short
Click to expand...
Click to collapse
Check your download...
Here's what I get, not much more useful...
Code:
> fastboot boot TWRP/twrp-3.4.0-0-sargo.img
Sending 'boot.img' (65536 KB) OKAY [ 2.187s]
Booting FAILED (remote: 'Error verifying the received boot.img: Invalid Parameter')
fastboot: error: Command failed
captain sideways said:
Hello,
So I've just read this in another thread:
"Open a command window and run the following command from the proper location:
fastboot boot path/to/twrp.img
This will temporarily boot TWRP on your device. Use ADB or MTP to transfer the zip onto your device."
So far, my understanding that I can't install twrp when using android Q, but can I follow the above instructions to temporarily boot into twrp in order to make a backup?
I know Google have changed some partitioning stuff with the pixels so I don't want to screw anything up is all
Many thanks
Click to expand...
Click to collapse
TWRP Is not *working* on Android 10 ... beside only booting you can also install it on your device but you will not be able to do a backup.
Ah OK, thanks for that, appreciate it. ? I'll stay tuned. I'm coming over from S7 stock oreo so I'm just relearning what's going on currently.
C:\Users\X\Desktop\platform-tools_r29.0.6-windows\platform-tools>fastboot boot C:\Users\X\Desktop\platform-tools_r29.0.6windows\platform-tools\twrp.img
fastboot: error: cannot load 'C:\Users\x\Desktop\platform-tools_r29.0.6-windows\platform-tools\twrp.img': too short
C:\Users\x\Desktop\platform-tools_r29.0.6-windows\platform-tools>fastboot boot twrp.img
fastboot: error: cannot load 'twrp.img': too short
i was trying to install a gsi but when i did the command fastboot flash system system.img an error came out: no such a file or directory. i tried to put the file shortcut, error, i tried to put it on the desktop, error.. info: i tried to install it both from the bootloader and from the fastbootD, but both gave me an error