ok i have been building my first rom on windows 7 64bit using kitchen and cygwin..
i build it cooked it and there is my zip . i first transferred it in my drive backup and then transferred only zip file, whenever i copy pasted after approx 20% it shows error of removed hardware storage which isn;t the case tried 4-5 times using sent to also but failed.it first dissconnects the storage and after cancelling copying autoplays again..it's not the hardware problem . i then directly pasted the file in folder and then pasted, it copied!!!
and when instLLING it gives error in CWM Status 6. Then afterwhile i directly pasted the Output folder and bam its working fine. it is not any scripting problem that my rom didn't install first(yours may have) but an ****ty windows problem.
MakingitRight said:
ok i have been building my first rom on windows 7 64bit using kitchen and cygwin..
i build it cooked it and there is my zip . i first transferred it in my drive backup and then transferred only zip file, whenever i copy pasted after approx 20% it shows error of removed hardware storage which isn;t the case tried 4-5 times using sent to also but failed.it first dissconnects the storage and after cancelling copying autoplays again..it's not the hardware problem . i then directly pasted the file in folder and then pasted, it copied!!!
and when instLLING it gives error in CWM Status 6. Then afterwhile i directly pasted the Output folder and bam its working fine. it is not any scripting problem that my rom didn't install first(yours may have) but an ****ty windows problem.
Click to expand...
Click to collapse
what phone, what mode and does it have ext sd?
Related
Can anyone help!..Iam trying to load up TomTom navigator 5 into my XDA from my pc but all iam getting is "Not a valid win32 application", is there a workaround for the problem.
Iam running XP Home on my pc and have a XDA1 running pocket pc 2002 version 3.17.03
maybe it's a pocketpc exe file ?
Yep- agreed with Rudegar...
Copy the file on PPC/SD Card and execute it from there.
No tried that not working
Download the file from another mirror/link. This exe might not have been completely downloded or could be corrupt.
hi there you have to copy the files out of the TomTom folder onto your MMc and then go into file browser and run it.
i made same mistake i put the tomtom folder on the mmc and went in to it and tried to installl but no look,u need to put the CONTENTS of that folder on the MMC then select the start(two tomtom hands) it will install then
Thanks mate, you done the trick....took it out of the original file and copied individually to the SD Card - took ages but cracked it, works a treat.
Again thanks
Same as posted here "I have an HTC [differing: Touch Pro (Alltel CDMA)]. I followed the instruction on forum.xda-developers.com for [FRX*] but it [enters an endless loop] at "task rpcrouter:15 blocked for more than 120 sec". The solution that worked in that link does not solve the same problem with a CDMA RAPH800.
The solution given there (paraphrased from that thread):
Link to the fix. The issue is caused by not having a data plan; the install gets stuck in a loop looking for a signal.
The solution that worked for a GSM phone
download RIL file from http://forum.xda-developers.com/atta...9&d=1302817139 and place in the root of microsd.
download rootfs file from http://www.megaupload.com/?d=1NGCVCTT and place in the root of microso.
add to the end of /conf/froyo.user.conf file "/sdcard/libhtcgeneric-ril.so /lib/froyo/libhtcgeneric-ril.so" before the last "}"
Please help me find a solution for a CDMA phone - next month I'd like to take a dozen of these phones and use them as learning aids in a construction course for laborers, but I cannot start testing construction applications since I cannot get the OS to work.
I'm curious as to what happens when you format your microSD and run FRX7.1MR without anything additional. Could I get you to try this method without the additional stuff?
To be explicit, I'd like you to format your microSD with something other than the Windows method and I'd like you to download THIS (if you haven't already) and THIS. Extract the contents of both files to the root of your microSD. You should see a folder called "FRX07.1" and under that folder, you should see 3 folders and 7 files. Move the contents of that folder up to the root of the microSD. Look under the folder called "STARTUPS" and locate your device type (ie RAPH800) and copy over to the root of your microSD. Once done, run Haret on your phone and let me know what happens.
do you have an application you suggest for "format your microSD with something other than the Windows method"; sourceforge did not turn up anything.
forest.peterson said:
do you have an application you suggest for "format your microSD with something other than the Windows method"; sourceforge did not turn up anything.
Click to expand...
Click to collapse
use SDFormatter
wow that SDformatter link has a lot of popups - this link feels less like I just found a date at the bus-stop sdcard.org/downloads/formatter_3 ; but it will not install on either Server2008R2 x64 or Server2003 R2 SP2 x32.
I reformatted the microSd with the format tool in Server2008R2 as FAT format. Installed the files, and boom - I see little green guys swirling around the screen. After awhile a dialog appeared "Sorry! The process com.android.phone has stopped unexpectedly. Please try again"; the dialog closed and it seems like it works! Thank you. I will try again with the HPtool and as FAT32.
Now I just need to learn how to use Android - and the screen calibration seems off? Deleting ts-calibration and rebooting to calibrate.
Glad to hear using the latest bundle works for you! Yeah, that might be a slight issue with an outdated kernel. The main thing I wanted to do is get you booted up first!
Before we continue, make sure you make a backup of your current configuration by copying the contents of the microSD and either moving it to your computer or some other storage device. This way you know you have a "working" bundle.
Next we update the kernel package from HERE; might I suggest using THIS kernel package. Be sure to delete the old files (should be located under root of the microSD and called modules-xxx and zImage) first! Extract till you see two files then rename zImage-xxx to just zImage and feel free to delete the files you extracted from. I've always created my own ts-calibration file but just wanted you to have it, "just in case".
Additionally, you may also need to update the rootfs by deleting the file called rootfs and downloading THIS file. Extract the file and rename to just rootfs and be sure to place it where the file called Haret is (default location is root of the microSD).
files are downloaded and installed - everything seems to work
Hello, I have a jiayu G3T ( G3QCT ) with JB Android 4.2.1 installed , but yesterday it occurred to me to look for a custom rom 4.2.2 , I downloaded the rom, and follow the instructions ( wipe data / factory reset wipe cache && && wipe dalvik ) then install the new rom, everything seems to be right , but when the phone rebooted , I noticed that said " INVALID IMEI " and did not detect the SIM card ...
I have no backup of the IMEI ( if I have the sticker underneath the battery)
I reinstalled the rom I had before jiayu , which comes standard rooted ,I have tried uncle tools and the application of jiayu , I entered the engineer mode so I went to connectivity CDS information Radio information, phone 1 & 2 wrote 2 lines (one for each option )
AT + EGMR = 1.7, " IMEI "
AT + EGMR = 1.10 , " IMEI "
but when you click on send command says " command failed to send, even after pressing repeatedly says " command was mSent " but on reboot, nothing has changed, and the IMEI is still not valid .
I tried the mtkdroidtools but says it was all right , the result is the same, nothing changes
I also tested the MAUI META 3G & IMEI and SN WRITER but I have not gotten any results ...
Someone could tell me how to fix it? thanks
I'd suggest you re flash stock rom using SP Tools, then use SN Gen to create a MP0B_001 file. Then place the generated file on your SD card, use root explorer, copy the file you have placed on the SD card and move it to /data/nvram/md/NVRAM/NVD_IMEI/, and set the file's permission to rw-rw----.
Then reboot and enjoy.
stock rom
and where i cant get that stock rom? could you link it to me?
sn_gen
ViKtory36 said:
I'd suggest you re flash stock rom using SP Tools, then use SN Gen to create a MP0B_001 file. Then place the generated file on your SD card, use root explorer, copy the file you have placed on the SD card and move it to /data/nvram/md/NVRAM/NVD_IMEI/, and set the file's permission to rw-rw----.
Then reboot and enjoy.
Click to expand...
Click to collapse
the stock rom could be any of http://www.jiayu.es/software.php?soft&jiayu=G3QCT ?
I have used (4.2.1)ROM Oficial Jiayu.es 20131203-000001 (the latest) and sn_gen to recover my IMEI.... but after copy and set the permissions, and reboot, anything changes, what Im doing wrong?
tdguchi said:
the stock rom could be any of http://www.jiayu.es/software.php?soft&jiayu=G3QCT ?
I have used (4.2.1)ROM Oficial Jiayu.es 20131203-000001 (the latest) and sn_gen to recover my IMEI.... but after copy and set the permissions, and reboot, anything changes, what Im doing wrong?
Click to expand...
Click to collapse
I see that the website is in Spanish, so I may interpret the files incorrectly.
I'm gonna presume that you have already downloaded and installed the required MTK VCOM Drivers, and the device's drivers which are also given on the website. Install both if you haven't already.
I see there is a scatter loading file present under the downloads. Download the scatter loading and the latest ROM. Extract both the ROM files and the Scatter Loading file to a same single folder. Then use SPFlashtool and select the scatter loading file from the extracted folder, and check ALL the boxes.
Then remove the battery from your phone, connect the phone to the PC, and click "Download" on SP Flash Tool. After it finishes, you should see a box with a green circle, which indicates the flashing was successful.
After that, put the MP0B_001 file on your SD card, and follow the steps given by me on post #2.
And don't forget to hit thanks if I have helped. =]
tried.....but no working
ViKtory36 said:
I see that the website is in Spanish, so I may interpret the files incorrectly.
I'm gonna presume that you have already downloaded and installed the required MTK VCOM Drivers, and the device's drivers which are also given on the website. Install both if you haven't already.
I see there is a scatter loading file present under the downloads. Download the scatter loading and the latest ROM. Extract both the ROM files and the Scatter Loading file to a same single folder. Then use SPFlashtool and select the scatter loading file from the extracted folder, and check ALL the boxes.
Then remove the battery from your phone, connect the phone to the PC, and click "Download" on SP Flash Tool. After it finishes, you should see a box with a green circle, which indicates the flashing was successful.
After that, put the MP0B_001 file on your SD card, and follow the steps given by me on post #2.
And don't forget to hit thanks if I have helped. =]
Click to expand...
Click to collapse
Well... that is what I did... was unsucccessful... imei is till missing... i have contacted jiayu support.. they said me that some phone are not able to restore IMEI in a easy way..... the ask me 18€ ( $24) aswell they ask me to pay the Shipping rates... so they could try to fix it...
tdguchi said:
Well... that is what I did... was unsucccessful... imei is till missing... i have contacted jiayu support.. they said me that some phone are not able to restore IMEI in a easy way..... the ask me 18€ ( $24) aswell they ask me to pay the Shipping rates... so they could try to fix it...
Click to expand...
Click to collapse
They want to just rip money off you.. All MTK devices have only that one way of restoring device's IEMI which I have listed above., as far as I know.
You can try doing the following (This is just speculation, I have never tried this but it MAY work, as a MP0B_001 file and a backup generated by Mobileuncle MTK tools have the same output when opened via a text editor.)-
After generating an IEMI file, open it using Notepad. Then copy everything written in it, make a new notepad file and paste it there. Save that file as "IEMI.bak" file, and put that in your sd card.
Then install Mobileuncle MTK tools from Play Store, give it root access and go to IEMI backup/restore option. You should find your saved backup there. Hit restore from SD card, and pray that it works.
If it doesn't work, then I'm sorry. Send the phone over to your manufacturer if all else fails.
ViKtory36 said:
They want to just rip money off you.. All MTK devices have only that one way of restoring device's IEMI which I have listed above., as far as I know.
You can try doing the following (This is just speculation, I have never tried this but it MAY work, as a MP0B_001 file and a backup generated by Mobileuncle MTK tools have the same output when opened via a text editor.)-
After generating an IEMI file, open it using Notepad. Then copy everything written in it, make a new notepad file and paste it there. Save that file as "IEMI.bak" file, and put that in your sd card.
Then install Mobileuncle MTK tools from Play Store, give it root access and go to IEMI backup/restore option. You should find your saved backup there. Hit restore from SD card, and pray that it works.
If it doesn't work, then I'm sorry. Send the phone over to your manufacturer if all else fails.
Click to expand...
Click to collapse
well.... or Im not generaing a valid file... or it doesnt work.....:crying::crying::crying::crying::crying:
I did everything right but when I press "send AT Command" appear An error on my screen "failed to send AT command" what did I do wrong? what can I do to fix it?
How to create that MP0B_001 file ?
ViKtory36 said:
I'd suggest you re flash stock rom using SP Tools, then use SN Gen to create a MP0B_001 file. Then place the generated file on your SD card, use root explorer, copy the file you have placed on the SD card and move it to /data/nvram/md/NVRAM/NVD_IMEI/, and set the file's permission to rw-rw----.
Then reboot and enjoy.
Click to expand...
Click to collapse
How to create that MP0B_001 file please help!
I have a rooted Xperia U with the TerraRom. I wanted to check out another rom called Infinity Rom v3. I downloaded it from the website, and dragged the file from my downloadfolder too the root of my Xperia U, where theres a hundred folders including my old Rom. I got an errror message up the second I let go of the folder. I have the norwegian language turned on, so I probably won't write the error code just like Windows is supposed too, but it was something like this: "Can't copy the file. The device stopped answering or is disconnected.". First I though that it was something wrong with the connection, but I found that transfering other zip files to the device is not a problem. I also tried to redownload the file, but the error appeared anyway. The file could be opened with WinRar, but not with 7zip. The file contained 2 folder, one called META-INF and one called system. There were also 2 files with the same names.
Winrar gave me an error message too, saying that the zip was/had unintentionally stopped (working) or something.
This is very annoying, and I would love if someone could take the time too tell me the problem, as that would help me a lot. Thanks
InterestedHacker said:
I have a rooted Xperia U with the TerraRom. I wanted to check out another rom called Infinity Rom v3. I downloaded it from the website, and dragged the file from my downloadfolder too the root of my Xperia U, where theres a hundred folders including my old Rom. I got an errror message up the second I let go of the folder. I have the norwegian language turned on, so I probably won't write the error code just like Windows is supposed too, but it was something like this: "Can't copy the file. The device stopped answering or is disconnected.". First I though that it was something wrong with the connection, but I found that transfering other zip files to the device is not a problem. I also tried to redownload the file, but the error appeared anyway. The file could be opened with WinRar, but not with 7zip. The file contained 2 folder, one called META-INF and one called system. There were also 2 files with the same names.
Winrar gave me an error message too, saying that the zip was/had unintentionally stopped (working) or something.
This is very annoying, and I would love if someone could take the time too tell me the problem, as that would help me a lot. Thanks
Click to expand...
Click to collapse
the last time i had this error i just restarted the android device or change the usb connection between mtp and ptp modes
joanthanmajh said:
the last time i had this error i just restarted the android device or change the usb connection between mtp and ptp modes
Click to expand...
Click to collapse
I can't find a way to change the usb connection between mtp and ptp in the storage section of the settings application. I tried turning my phone off and on, but no difference.
InterestedHacker said:
I can't find a way to change the usb connection between mtp and ptp in the storage section of the settings application. I tried turning my phone off and on, but no difference.
Click to expand...
Click to collapse
have you could restarting you pc or maybe your storage is full?
joanthanmajh said:
have you could restarting you pc or maybe your storage is full?
Click to expand...
Click to collapse
I have restarted my pc, and my storage still got plenty of space left. It's only this one file that won't transfer. I have tried many other files and they work, but this one doesn't. :/
InterestedHacker said:
I have restarted my pc, and my storage still got plenty of space left. It's only this one file that won't transfer. I have tried many other files and they work, but this one doesn't. :/
Click to expand...
Click to collapse
how big is the file? is it more than 4 GB? Does the file have special characters?
Hey people, hope you can help me, this is my first post I have tried putting this in the relevant thread but I cannot due to the fact I have less than 10 posts. http://forum.xda-developers.com/showthread.php?t=2756314
So this is how far i got installing the latest version of Android onto the touchpad,
Download novacom = success
Download TPtoolbox = success
Connect HP touchpad to PC via usb cable in recovery mode = success
Download the 3 files needed for the process (ROM, recovery and Gapps) = success i think
Open TPtoolbox on the pc and start the programme which then activates on the HP touchpad = success
complete data reset via TPtoolbox on the touchpad removing old version of WebOS = success
Start Android intall on the TPtoolbox which opens a hp file on my PC = success
Drag and drop the ROM, recovery and gapps software into the HP file in my computer = success i think
then the problems start, once i have moved all 3 necessary files into the ho file on my pc for transfer to the touchpad I get the following message on my touchpad "No supported recovery file found. Aborting." Now I assume I have not put the recovery file into the HP folder correctly (should it go in zipped or unzipped?), I have also noted that all 3 files (ROM, gapps, recovery) have some of the same files which install over each other ??
Any help would be appreciated.
thanks in advance.
Recovery file should also be zipped like ROM and gapps. Try twrp recovery.
Thank you, do all 3 go in completely unzipped ?
An update guys, put all 3 files into the hp folder (ttinstall), all unzipped as winRAR files, pac_tenderloin_4.4.4. RC-1_20140926-113409 (ROM), gapps-kk-20131119 (GAPPS), update-TWRP-jcs-dm-tenderloin-20140512 (Recovery).
Still coming up with "No supported recovery file found, Aborting.
??????????????????? I have tried another recovery file (pilZ) and still nothing. ANY IDEAS PLEASE !!!!?!?!?!?!?!?!?!?!?!
Update guys Kept trying and got it to work, all I can think is that I copied each of the three files into a subfolder before dragging them into the HP touchpad file ? I dragged them directly from my downloads folder and it worked like a charm.. I can only assume the files were corrupted/damaged because they were copied from the downloads folder to a subfolder ? Happy as a clam :laugh:
i continue to have issues installing it this way
i have
gapps-kk-20140606-signed
pac_tenderloin_4.4.4.RC-1_20140926-113409
update-TWRP-jcs-dm-tenderloin-20140512
and I get FAILED No supported ROM File found
rukahspac said:
i continue to have issues installing it this way
i have
gapps-kk-20140606-signed
pac_tenderloin_4.4.4.RC-1_20140926-113409
update-TWRP-jcs-dm-tenderloin-20140512
and I get FAILED No supported ROM File found
Click to expand...
Click to collapse
Hi, sound similar to what I got, are you dragging your ROM folder directly into the HP folder ? Might be worth downloading another ROM to be sure ?
i tried the several types of PAC roms that are available for the touchpad and all give me the same error, i wonder how u got it to work
Are all three files going in zipped.
To be honest, I've never had much luck with the PAC roms, I used JC Sullins.tenderloin app and it work perfectly, try that.