Root Your Micromax A45 with CWM Recovery
Required Files To Root Your Punk
CWM 6 Recovery For MMX A45 Check My Thread
http://forum.xda-developers.com/showthread.php?t=1987353
Download ROOTA45.zip From Attachment
NOTE: CWM Recovery only need to flash zip file
NOTE: CWM Recovery only need to flash zip file
NOTE: CWM Recovery only need to flash zip file
Try if CWM based the recovery, you must be off the phone once you press Volume up + Volume down and power button (do not Let go) may appear to be choices you press Just up button to enter recovery.
First make backup with CWM Recovery
How to Backup on CWM Recovery
1) Enter CWM recovery (you know how to enter)
2) Select backup and restore >>backup
3) Wait after (Make sure that there's more to 500mb plus space on the SDcard)
Now,
How to Root Micromax A45 Punk With CWM
1) Enter CWM recovery (you know how to enter)
2) Select install zip from sdcard >> choose
zip from sdcard >> select RootA45.zip from your sdcard
3) Select Reboot system now >> now check you superuser install in your punk or download root checker from play store
Credit Goes Only Me To Root MMX A45 With CWM Recovery
Note:- I am not responsible for any problem
hit thanks button for me.....!
Good Work........... :good:
But where gone that rooted boot.img...... without it.... rooting is not possible...... may b :laugh:
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
My work
Make YoUR oWN App
Sing Your App Easily
Red-Ics Theme For A60
Darky Buky Theme For Android
X-zoom V2 Transparent Custom Rom For MMx A60
Happy Developing :fingers-crossed:
.......
aguha1044 said:
Good Work........... :good:
But where gone that rooted boot.img...... without it.... rooting is not possible...... may b :laugh:
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
My work
Make YoUR oWN App
Sing Your App Easily
Red-Ics Theme For A60
Darky Buky Theme For Android
X-zoom V2 Transparent Custom Rom For MMx A60
Happy Developing :fingers-crossed:
Click to expand...
Click to collapse
its possible with my method only
Higher kernel for a45???????????
not now.....
hatova said:
Hi
gher kernel for a45???????????
Click to expand...
Click to collapse
not yet............
HEY BRO'S/SIS'S Today I'm Presenting u An New Angry Bird Lockscreen
Downloads : http://www.mediafire.com/download/41wej44yzyj5o42/A1+_lock_screen_angrybird.zip
How To Install
1.Download zip from link given above
2.Reboot to cwm recovery
3.Goto install zip /choose zip from sdcard
4.Now select A1+ lockscreen angribird.zip and install
5.Reboot And enjoy
HIT THANKS IF I HELPED U:angel::laugh::laugh:
Horizontal Boot Animation of Apple Vs Andriod
Must Install It once
OFFICIAL THREAD
SEE THE GIF ANIMATION FILE IMAGE N DOWNLOAD THE ZIP FILE!!!!!!
Flashing procedure :-
1. Install bootanimation *root* in ur A110 from playstore
2. Install The Zip file through bootanimation *root*
Please Hit Thanks This is my Hardwork !!!! HARDWORK MADE WORK EASY
Mirror link - http://d-h.st/q3t
Guys Link n zip File Updated Now Its OKK CHECk It ITS AwEsOmE!
View attachment 2928871
Hello Everyone
M back..with some new stuffs
itz FAISAL new on xda...
Today i am going to share an rom of JELLY BEAN 4.1.2 based on xperia Rom
For our SPICE MI-435.. hehehe..
u got amazed na ..YUp M serious ..
Download Link: http://www.mediafire.com/download/2bw0kr2c9sznddd/XOLO_A500_Mod.zip
Gapps Download Link: http://www.directmirror.com/files/1G1NLBWW
Flash the Gapps using Root Explorer
Fb: http://fb.com/MDFAISAL6
|||| GUIDE FOR INSTALLATION ||||
1. Battery must have 60% above
2. Move downloaded XOLO A500 Mod.zip to your sd card root
3. Boot to CWM recovery mode [[VOL DOWN+POWER KEY TOGETHER]]
4. MAKE A NANDROID BACKUP OF UR WHOLE SYSTEM
5. Go to MOUNT AND STORAGE and Do a SYSTEM FORMAT,,mount DATA,,mount SYSTEM,, mount SD CARD
6. Go to install zip from sd card
7. Choose zip from sd card
8. Install XOLO A500 Mod ROM.zip
9. After successfully installation REBOOT
10. Done
ENJOYYY
PLZZZ HIT THE THANKS BUTTON IF I REALLY HELPED YOU :good:
Installing Video OUT NOW on YouTube
Watch : https://www.youtube.com/watch?v=DYLmaO4asGs
||| MD FAISAL NP |||
Q&A for [ROM] Flying Sparrow V3.0 { The Fastest ROM For Micromax a89 }
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Flying Sparrow V3.0 { The Fastest ROM For Micromax a89 }. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
not working..after imstalling it reboot to recovery
not working..after imstalling it reboot to recovery..help
Follow the instructions carefully
sunilbagal said:
not working..after imstalling it reboot to recovery..help
Click to expand...
Click to collapse
1) Download the zip file from the download link provided below...
2) Extract the zip file....
3) You will find two zip files inside it,, first one is ROM zip and another is addons zip...
4) Copy both the zip files two your SDcard ..
5) Go to recovery mod and firstly take the nandroid backup and reboot...
6) Again go to recovery mod and wipe cache ,data ,system and dalvik cache flash the ROM zip only and reboot...
7) Then again go to recovery mod and flash the addon zip...
8) That's it ..now reboot your phone ....now fly with sparrow
---------- Post added at 06:28 AM ---------- Previous post was at 06:25 AM ----------
sunilbagal said:
not working..after imstalling it reboot to recovery..help
Click to expand...
Click to collapse
Do not flash the addon zip just after installing ROM .... A reboot is necessory after installing ROM and after a reboot then flash addon zip.. Also don't do any factory reset after installing both rom and addon zip.
And after this if again any problem occur then do inform me...
a complaint
My handset has been appearing white and then booting often, but it is not booting properly and it becoming white and then again booting as ninja..I don't know what to do...please help me Bro's....I can't use my headset ninja a89..;reply me soon... XDAXda
Finally sorry for my English...
I think you don't followed the instructions to install flying sparrow carefully... Please read the instructions first and strictly follow them.. And also use the cautions..
Also report me if it work
USB Mass storage not working
Hi
I have installed Flying Sparrow OS in my A89. But my USB mass storage function is not working. I cannot connect it as a media device or as a camera. It just gets charging when connected to my computer. How can I get out of this??? Thanks in advance..
solution
Karthik Bala said:
Hi
I have installed Flying Sparrow OS in my A89. But my USB mass storage function is not working. I cannot connect it as a media device or as a camera. It just gets charging when connected to my computer. How can I get out of this??? Thanks in advance..
Click to expand...
Click to collapse
Actually flying sparrow is completely bugless but if you are facing problem of usb ,do the following things for solution. Firstly install the rom zip only don't flash the addon zip and reboot .Then try to connect your phone to your computer. Then usb will work.. And after this try ,go to recovery mode and flash the addon zip.. And reboot. Don't do factory reset.. Now usb will work.. If any other problem occurs report me
Not Working in my A89
HI,
I downloaded your file, and transferred to SD card, I used CWM Recovery to install, after few steps , after opening update package...., installing update......, installation aborted. I tried the same 3 times and getting the same message. Kindly guide me to install your ROM in micromax A89.
venki
+91 9342519832
solution
vsmv said:
HI,
I downloaded your file, and transferred to SD card, I used CWM Recovery to install, after few steps , after opening update package...., installing update......, installation aborted. I tried the same 3 times and getting the same message. Kindly guide me to install your ROM in micromax A89.
venki
+91 9342519832
Click to expand...
Click to collapse
Installation is abroted because you are installing the wrong zip file...
You need to firstly extract the downloaded zip file and you will find the ROM zip inside it
Kindly follow the steps...
1) Download the zip file
2) Extract the zip file....
3) You will find two zip files inside it,, first one is ROM zip and another is addons zip...
4) Copy both the zip files two your SDcard ..
6) Go to recovery mod and wipe cache ,data ,system and dalvik cache flash the ROM zip only and reboot...
7) Then again go to recovery mod and flash the addon zip...
8) That's it ..now reboot your phone
Need Help
installation Steps For CWM 6 Users
Make Backup BEFORE Flashing
1.Download Flying sparrow v3.0
2.Put it on your SDcard
3:Go to CWM Recovery(Press Vol. Up Power
Button)
4.wipe cache partition
5. Format Data(Mounts And Storage>Scroll
Down>Format Data)
6. Format System(Mounts And Storage>Scroll
Down>Format System)
7. Format Dalvik Cache(Advanced>Dalvik
Cache)
8. Go back at the first page of the CWM
recovery and choose install .zip from SDcard
9.Choose
Flying sparrow v3.0.zip
10.then reboot and then again go to recovery and then go to again install zip from sd card and choose addon zip and flash it
11. then reboot and then again go to recovery and then go to again install zip from sd card and choose full kitkat white theme and flash it
12.Then reboot system now
I am using this method for install flying sparrow v3.0 in Micromax a89 ninja this method is right or not please tell me flying sparrow v3.0 developers fast
Abhay S said:
installation Steps For CWM 6 Users
Make Backup BEFORE Flashing
1.Download Flying sparrow v3.0
2.Put it on your SDcard
3:Go to CWM Recovery(Press Vol. Up Power
Button)
4.wipe cache partition
5. Format Data(Mounts And Storage>Scroll
Down>Format Data)
6. Format System(Mounts And Storage>Scroll
Down>Format System)
7. Format Dalvik Cache(Advanced>Dalvik
Cache)
8. Go back at the first page of the CWM
recovery and choose install .zip from SDcard
9.Choose
Flying sparrow v3.0.zip
10.then reboot and then again go to recovery and then go to again install zip from sd card and choose addon zip and flash it
11. then reboot and then again go to recovery and then go to again install zip from sd card and choose full kitkat white theme and flash it
12.Then reboot system now
I am using this method for install flying sparrow v3.0 in Micromax a89 ninja this method is right or not please tell me flying sparrow v3.0 developers fast
Click to expand...
Click to collapse
Everything is ok but between steps 1 and 2 you forget to extract zip file... After extraction you will find rom zip and addon zip.. You have to put these two zip files in your sdcard...
install fly sparrow in micromax a89 ninja
installation Steps For CWM 6 Users
Make Backup BEFORE Flashing
1.Download Flying sparrow v3.0
2.Put it on your SDcard
3:Go to CWM Recovery(Press Vol. Up Power
Button)
4.wipe cache partition
5. Format Data(Mounts And Storage>Scroll
Down>Format Data)
6. Format System(Mounts And Storage>Scroll
Down>Format System)
7. Format Dalvik Cache(Advanced>Dalvik
Cache)
8. Go back at the first page of the CWM
recovery and choose install .zip from SDcard
9.Choose
Flying sparrow v3.0.zip
10.then reboot and then again go to recovery and then go to again install zip from sd card and choose addon zip and flash it
11. then reboot and then again go to recovery and then go to again install zip from sd card and choose full kitkat white theme and flash it
12.Then reboot system now
I am using this method for install flying sparrow v3.0 in Micromax a89 ninja this method is right or not please tell me flying sparrow v3.0 developers fast
Installation steps updated
Steps for installing rom properly are updated now and explained properly for cwm and twrp users individually in the discussion page.....:d
regarding xblast tools
Flying sparrow is the best rom i have used till now. the only thing that i want to ask is how to change the background image of apps like settings, contacts,phone.
Secondly,certain changes made in xblast tools like of quick settings do not get implemented.how do i do that?
And finally, everytime i open Ex themer & select the theme option it says no data found. How do i theme my phone.
I use a micromax a89 ninja.
Thank you
Solution
Pbm12345 said:
Flying sparrow is the best rom i have used till now. the only thing that i want to ask is how to change the background image of apps like settings, contacts,phone.
Secondly,certain changes made in xblast tools like of quick settings do not get implemented.how do i do that?
And finally, everytime i open Ex themer & select the theme option it says no data found. How do i theme my phone.
I use a micromax a89 ninja.
Thank you
Click to expand...
Click to collapse
For changing the background wallpapers of apps you need to decompile them.. There are many tutorials available on xda ,kindly follow them..
Quick settings will not work work on flying sparrow as quick setting will only work for jb.. You can try to install them but i know that this feature will not work for an ics based rom.. Proceed to post no.2 in the discussion thread of flying sparrow for installing xposed framework.. Also i have provided the list features of xblast tools which are tested and work perfectly on flying sparrow.. If follow the procedure in post 2 correctly you will successfully work with exthemer... You need to select exthemer in the module list of xposed installer.. And reboot.. I hope this will help you and give answers to you your questions... Also participate in poll in flying sparrow thread...
Error
Hey,there is problm after reboot......
it does not go further after boot animation..
plz help me out....
How to remove transparency in each view
Hi Preet,
I have installed your ROM, on MMX A89 just few minutes before, and it looks nice.
I have some questions and main is I DO NOT want Transparent background in any case.
How do I achieve that in your ROM? I do not like transparent background.
Please help me for this.
Note: I will wait for 1 day otherwise I will restore my old backup (ICS 4.0.4 company look). And what you had said about battery saver? What bug it has for battery?
Thanks in advance.