I have a tasker profile set up to turn on my Bluetooth for 5 minutes every 90 minutes from 6:30am - 10pm each day. The only bluetooth thing i own is my fitbit, which syncs directly to my GS4. However, I noticed that even though my profile turns bluetooth on and off every 90 minutes, it doesn't automatically sync to Fitbit. Is there a way, through tasker, that I can force the update when bluetooth turns on?
Thanks for any help you can give!
Jeremyawilliams said:
I have a tasker profile set up to turn on my Bluetooth for 5 minutes every 90 minutes from 6:30am - 10pm each day. The only bluetooth thing i own is my fitbit, which syncs directly to my GS4. However, I noticed that even though my profile turns bluetooth on and off every 90 minutes, it doesn't automatically sync to Fitbit. Is there a way, through tasker, that I can force the update when bluetooth turns on?
Thanks for any help you can give!
Click to expand...
Click to collapse
Hello, any luck with that? I have the same issue and wasn't able to solve it.
mrc87 said:
Hello, any luck with that? I have the same issue and wasn't able to solve it.
Click to expand...
Click to collapse
No such luck. I just ended up keeping Bluetooth on all the time and resorted to Juice Defender (which does a pretty good job) to help with battery life.
Too bad... I'll probably resort to create a tasker setting that turns Bluetooth on when I open the fitbit app and turns it off when I exit. Or even just have it automatically open every x minutes and then close it.
mrc87 said:
Too bad... I'll probably resort to create a tasker setting that turns Bluetooth on when I open the fitbit app and turns it off when I exit. Or even just have it automatically open every x minutes and then close it.
Click to expand...
Click to collapse
I did that too, but it too too long to boot up and then I ended up manually refreshing anyway. I just don't sit there and open my Fitbit app and sit there with it for a few minutes waiting for it to sync.
Did you try to have it do it only when the screen is off and without having it turn the screen on?
mrc87 said:
Did you try to have it do it only when the screen is off and without having it turn the screen on?
Click to expand...
Click to collapse
I think I set it up to turn bluetooth on every 2 hours for 5 minutes and when that happened, open up the fitbit app and leave that on for 5 minutes, only when the screen was off. However, inevitably, I always ended up turning the phone on when it was in the middle of the 5 minute window and I just got annoyed and scrapped it.
I just set it up to turn bt on for 15 minutes every 45 and nothing else. It seems to work, I have the fitbit widget on the home screen and it is updating even though I haven't accessed the app since this morning.
Nice. Glad you got that working. I'll probably stick with what I've got because I also use Dash along with a bluetooth OBD sensor in my car to monitor my driving and engine health, etc. If I had BT turn on and off, Dash wouldn't work.
Side note, have you ever used Llama?
Ok!
I had used llama once, I think back on gingerbread and wasn't too much into it. Frankly, I don't even remember exactly what it was for! Changing settings based on location maybe? I use tasker for that already, though.
Ok, I'm totally hijacking this thread now, I've used Llama since my old gingerbread phone and it does a great job at 99% of what I want. It's primarily location-based profiles or tasks, but it can also do other things like manage profiles and tasks based on whether a headset is plugged in or other device states.
The thing I can't figure out in Llama (and am trying to figure out in Tasker) is I want my phone to go to silent, with no vibration or sounds overnight, but I want my weather radio app and a few select contacts to be able to ring through. Any idea how to accomplish those exceptions within Tasker?
Jeremyawilliams said:
Ok, I'm totally hijacking this thread now, I've used Llama since my old gingerbread phone and it does a great job at 99% of what I want. It's primarily location-based profiles or tasks, but it can also do other things like manage profiles and tasks based on whether a headset is plugged in or other device states.
The thing I can't figure out in Llama (and am trying to figure out in Tasker) is I want my phone to go to silent, with no vibration or sounds overnight, but I want my weather radio app and a few select contacts to be able to ring through. Any idea how to accomplish those exceptions within Tasker?
Click to expand...
Click to collapse
I'm sorry, it doesn't sound too complicated, but I've never used tasker like that. There must be a tasker thread or subforum on xda, no?
mrc87 said:
I'm sorry, it doesn't sound too complicated, but I've never used tasker like that. There must be a tasker thread or subforum on xda, no?
Click to expand...
Click to collapse
I ended up figuring it out with a combination of the Tasker group on Google+ and some other forums.
Related
I use Tasker for automating a lot of redundant tasks on my phone. I figured I would post a couple I'm using with hope that others will share with me some stuff they use it for.
action: Docked.
Tasks done when docked: Bluetooth on, wifi off, gps on, auto brightness set off [if time < 1800, Display Brightness set to 255 if time < 1800, pandora set on.
exit tasks: Bluetooth off, auto brightness on if TIME < 1800, pandora set off, gps off.
Action open Application Maps/Nav or any gps app.
Tasks done: GPS on
exit tasks done: GPS off.
action: phone face down
Tasks done: airplane mode on if time < 2200, all sounds off except for alarm
exit tasks: airplane mode off, all sounds revert to previous settings.
these 3 i use, if you have any others let me know. If you need help with the program let me know too.
here is where you can grab tasker.
http://tasker.dinglisch.net/
Sounds something that I would definitly use. I beleive its a paid app, but still worth it. I'll look into it. Does it have settings for wifi e.g.- 1 touch WIFI on, because i'm using the stock wifi on/of toggle but I then have to go into wifi settings and actually see my phone connecting to my network in order for i to work and turn on.... ??????
Yeah there are settings for connecting to wifi. Mine does it automatically when I get home based on the gps. Works most of the time, had to turn it on manually a couple times because the gps wasn't on.
generic.imitation said:
Action open Application Maps/Nav or any gps app.
Tasks done: GPS on
exit tasks done: GPS off.
Click to expand...
Click to collapse
How do you set up an OR for the app launch context? I'm trying to get it to turn on GPS when I open Maps, Foursquare, Yelp, or Places, but it doesn't let me multi-select apps and if I add a context, Application isn't there.
Make it separate tasks.
make 1 for each app.
Foursquare - turn on gps. Turn off gps when exit.
Ect.
also, I guess there is a wiki with a bunch of samples I guess. I'm out at a remote beach on northern oahu right now, but if someone doesn't post it before me I'll post the link when I get home.
generic.imitation said:
Make it separate tasks.
make 1 for each app.
Click to expand...
Click to collapse
Yeah, that's what I've been doing. It'd just be nice if you could have conditionals in the context. IF Yelp OR Foursquare OR Maps OR Places then ...
Post over there and make a feature request, they should put that in I agree .
Just bought Tasker and so far I like it. Can't seem to figure out how to do the following task though.
I need to set to static IP when on a certain wifi connection. I already have the IP set and the only thing that will need to be done is to toggle the static IP checkbox in the advanced setting of wifi. I know how to specify the wifi network but how can I make it toggle that checkbox/setting?
Thanks for any info.
i made a simple widget to toggle the screen brightness to two preset brightens for inside and direct sunlight.
i could not find an app that let me choose the brightness, they either made it full dark/bright.
i can't work out however to toggle a different widget icon to indicate on/off...
i've tried set icon but with no luck
its not really needed but would be good to have/know for future apps
also, can anyone explain how the HTTP (get info from net) works?
i want to try a few things but not really sure how it works
This app is the best app on the market... hands down. #Win
generic.imitation said:
Yeah there are settings for connecting to wifi. Mine does it automatically when I get home based on the gps. Works most of the time, had to turn it on manually a couple times because the gps wasn't on.
Click to expand...
Click to collapse
You should use "wifi near" as a condition instead of "gps". That way it just toggles you wifi on and off periodically and if it is near... it will connect.
Gps is so demanding on the battery... and not always accurate... as you see
I set mine up so whenever I plug in my headphones my music app opens
Sent from my DROIDX using XDA App
ichigopow said:
I set mine up so whenever I plug in my headphones my music app opens
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
I set my heaphones the same.. but at the same time, it cuts my media volume up (in case it was down) and when I unplug them... it returns my media volume back to it's previous value
MrDanger said:
I set my heaphones the same.. but at the same time, it cuts my media volume up (in case it was down) and when I unplug them... it returns my media volume back to it's previous value
Click to expand...
Click to collapse
I do the same except my volume goes down when I plug them in so I don't have music blaring in my ears.
Sent from my DROIDX using XDA App
I also have a profile that texts my gf a random message at a random time that is between 7:30 am and 7:40 am (so she don't think it's automated lol) every morning. I got that idea from LexusBrian
Again.. great app!
Here was I have got going on with tasker.
Car dock: gps on, bluetooth on, display always on, notification volume off. On exit they all do the opposite.
When home: wifi on. Exit wifi goes off.
At work: phone goes to vibrate for everything.
10pm to 545am: phone goes quiet.
I second it a best app ever. Wifi, gps, and bluetooth are never on when I don't need em. Come on you can't beat that. What a battery saver.
Sent from my DROIDX using XDA App
Tasker is an incredibly handy utility.
Here's the profiles I use:
GPSonForLocationApps - I think this one has already been covered by this thread.
WifiOnAtHome - I use the wifi near option... although I think it's causing issues with my 3G signal... it will occasionally turn on wifi to check if I'm at home which seems to turn off 3G. Still playing with this one.
LowVolumeDuringWorkHours - sets various volumes appropriately so I can still hear stuff but doesn't annoy folks working near by. I turn this on/off based on day of week and time of day. Upon exiting this profile it returns my volumes back to normal.
NoficationsOffAtNight - I turn off notifications at night and if my phone is plugged into AC.
SilentForMeetings - if I have a calendar entry where I'm marked as busy it turns my phone to silent mode.
Openwatch?
Hello
I am new to Tasker, and I'm starting to understand exactly how much you can do. Uses open watch a lot and have done a lot of settings to make my clock better. But I wonder if I can get messages from one app to my watch. The app is an ice hockey results service. And each time it becomes a goal, I get it as income message in the status bar. But can I get the message in the clock at the same time? Right now I just get a message in the watch which I've written, but would like it says in the status bar so you do not I pick up the phone to look at the result. Is there perhaps a few codes to enter, instead of my message is? Hope you understand me?
I have mine set to enable WiFi when I connect to a certain cell tower. Keeps the drain on my batter to nothing more than it was already at, and GPS is only enabled for about 5 minutes to and from the house. I'm sure the drain for that combined 10 minutes is much less than periodically checking the GPS or if a network is near.
I am turning off gps when I get to my home cell tower and turning on my wifi at the same time.
For my multimedia apps like pandora, I have my screen stay on when plugged to a power source.
Sent from my DROIDX using Tapatalk
Sorry if this has already been asked but is there a way to disable or mute notifications between certain times? Or at least email? This way the phone doesnt go off when I am asleep.
I use Sound Manager. Gives you the option to set the volume levels for media, system, notifications, etc and to set schedules for any of these. I use it to set my notification volume down low after 2:00am and to come back up to high volume around 8:00am and so far has worked just fine.
Tasker works great for this
Sent from my SAMSUNG-SGH-I897 using XDA App
Tasker probably can do that but its a ready complicated learning curve imo
Tasker rocks..definitely worth it...
I have the same thing..here is how to set it up in Tasker...
From 23:00 Til 07:00
Silent Mode On
That's it...
I also have it setup for an exception that if one of two people call me from work then it overrides and rings...
I have done a ton of stuff with Tasker -- like turning phone to vibrate during meetings, turning on gps automatically when I run certain programs (and then turn it off again when I close them), Play a sound when the plug becomes disconnected while charging, change the screen turnoff time when phone is charging, etc..
If you can't tell I love it.
Another plug for Tasker. It is awesome. The MacGyver part of my signature is brought to you in part by Tasker. And the letter A, for Awesome.
If Tasker seems hard to get into, check out their site for info: http://tasker.dinglisch.net/
A really nice use I have for it is automatically adjusting my screen brightness when plugged/unplugged.
fldude99 said:
Tasker probably can do that but its a ready complicated learning curve imo
Click to expand...
Click to collapse
Tasker does have a bit of a learning curve and if it's just simply turning off notifications, there are probably simpler solutions. But I love Tasker to bits. I have it set so between my usual bedtime hours, the phone goes silent, Screen Filter activates and dims it way down and Orientation turns off so I can lay down and read without it turning into landscape. I seem to always be finding new things to add and tinker.
Also recently added a function where the screen timeout goes away when Maps is activated. Got tired of losing the lock because it takes so darn long to get it back!
I use Volume Toggle - it is free (ad supported) and it has a bunch of different profiles you can customize.
It has a companion program "Volume Timer" (also free) that lets you set days and times for each profile.
I used to use Sound Manager but it decided to stop working, even after re-installing it still decided to quit after using it awhile.
I now use AudioGuru, it works great for scheduling volume settings for anything on your phone (System, Alarm, Ringer, Notifications, etc). Very easy to use and hasn't failed me yet. Recommended.
I use Silent Time Lite. It is free from the App Store and is very simple to use.
Sweet Dreams is available on the market and works great. Easy to use.
Thanks all, Tasker looks like it rocks. I will get it loaded. I like the "if bluetooth connected then read outloud the text messages", this way whenever I am in my car, it will read the tm! thats sweet.
I just moved to the Maxx from a GNex that I've been using Carbon Rom (and Liquid before that). These Roms had settings built in that allowed me to mute sounds other than the phone on a schedule. Is this somewhere in the settings I haven't found or do we need to use something like Silent Hours from the Play store?
If we need to use a 3rd party solution, is there something better than Silent Hours?
Sent from my XT1080 using xda app
Check out "Assist," which comes pre-installed in the app drawer. It has a sleep mode that mutes everything, but there are options to allow calls from favorites and/or anybody who calls twice within five minutes.
jvflynn said:
I just moved to the Maxx from a GNex that I've been using Carbon Rom (and Liquid before that). These Roms had settings built in that allowed me to mute sounds other than the phone on a schedule. Is this somewhere in the settings I haven't found or do we need to use something like Silent Hours from the Play store?
If we need to use a 3rd party solution, is there something better than Silent Hours?
Sent from my XT1080 using xda app
Click to expand...
Click to collapse
Totally agree on checking out Moto Assist already on your phone but I am still using Tasker for this and it is working great as always!
Can you point me in the right direction to set up Tasker without learning some wild mix of Cobol and Fortran ?
The issue I have with Assist is that callers need to call twice or be marked as a favorite. I'd like ALL calls to come through but leave everything else silent at night.
Sent from my GT-N5110
jvflynn said:
The issue I have with Assist is that callers need to call twice or be marked as a favorite. I'd like ALL calls to come through but leave everything else silent at night.
Click to expand...
Click to collapse
Llama can do that, and it's a lot easier to set up than Tasker. After yo install it, change the Quiet profile to have a normal volume ringtone and a zero volume notification tone (Llama will try to protest that post-ICS that these volumes are linked, but you can tell it to set the volumes normally, as we all know they are discrete on the Maxx), and then go to the Events tab and adjust the timing of the Quiet at night event to how you want it to be (for timing; you an also delete the home condition if you like.)
jvflynn said:
Can you point me in the right direction to set up Tasker without learning some wild mix of Cobol and Fortran ?
The issue I have with Assist is that callers need to call twice or be marked as a favorite. I'd like ALL calls to come through but leave everything else silent at night.
Sent from my GT-N5110
Click to expand...
Click to collapse
Here is my tasker profiles and task that I've been tweaking for quite a few years now. It turns on if you are charging by either AC outlet or wireless and turns off if any call comes in, cancel it via the notification or take if off charging. It auto turns back on if still charging and the call has ended.
I find this method better as opposed to time based silent mode, as the weekend my sleep pattern is a little bit later compared to the work week. Enjoy! :victory:
opt05 said:
Here is my tasker profiles and task that I've been tweaking for quite a few years now. It turns on if you are charging by either AC outlet or wireless and turns off if any call comes in, cancel it via the notification or take if off charging. It auto turns back on if still charging and the call has ended.
I find this method better as opposed to time based silent mode, as the weekend my sleep pattern is a little bit later compared to the work week. Enjoy! :victory:
Click to expand...
Click to collapse
Thanks for sharing! I've just loaded your profiles and task into Tasker... without Cobol nor Fortran!
I'll try this over the next few days and see how this works.
Sent from my GT-N5110
Not a problem! Let me know what you think or if you have any questions about them.
This is literally my last hope. I've tried so hard, but ended up having to come here and ask, which I don't mind, just feels like I suck, because I've given up lol
I have Tasker on my one plus one, and its doing great, I have current set ups doing such as:
Turning on and off WIFI when I like the radius
Headphone music app enables with insertion
Auto SMS for Night and Work
But theres one more.... that I just cant get my freaking head around......
I want Tasker to turn off my Auto-sync and Mobile Data when I turn the screen off, after a 5min wait period.
And then for it to re enable, for 5mins every 1 hour, whenever the screen is off, forever.
And to re enable Mobile data and Auto sync when I turn the screen on.
I am very close to it, but I just cant put everything in the right place to get it to work, although.... saying that, ive never got the Data to turn off in general via a task, so I'm probably screwing most of it up.
I hope someone can help,
Thank you for reading
Alex
Bump.
Could you Export your profile and send it to me? I'll have a look at it.
I can't believe it, but after the new update I still cannot get a full day on the battery. is this normal with always on?
Not normal. turn auto heart rate off, turn s-voice off, use a dark background to conserve battery while always on, turn on inactive notifications, etc.....
Thanks I turned off some things I turned off everything except Bluetooth but now it doesn't seem to be changing the time or updating the weather for the location I just landed in. Is there something that has to be on besides Bluetooth? Or can I have every single thing off . thank you
gorelow said:
Thanks I turned off some things I turned off everything except Bluetooth but now it doesn't seem to be changing the time or updating the weather for the location I just landed in. Is there something that has to be on besides Bluetooth? Or can I have every single thing off . thank you
Click to expand...
Click to collapse
Apps have intervals. For example, the heart rate sensor by default is set to 10 min. Imagine the impact that has on the battery. Same with weather. You can set your weather to check every hour but you must turn on your phones GPS. The watch doesn't know where you are if your phone's GPS is off. You pick and choose what notifications you need with intervals while others can be manually updated.
For the most part, I have everything off on my watch except for bluetooth. I manually update weather, heart rate, i dont use voice search on my watch (Google assistant on my phone; ok google), my gear is LTE and I turn that off to save battery, etc... mostly, I use my watch for notifications and answer phone calls when I drive. If your watch isn't changing time while bluetooth is on, you might want to try another watch face because that isn't normal.
Sent from my SM-N950U1 using Tapatalk
I suggest also powering down when you notice rapid battery loss. Some times for no reason after charging overnight, my battery just starts draining fast. Powering down and then up fixes the problem. Also, double check no app is running more than you'd expect. When Samsung updated the Mail app recently on my Note 4, I noticed the my Gear S3 showed super high Mail app usage. I forced stop the Mail app, and then all went back to normal.