[STOCK ROM] Telstra Android 4.2.2 / Sense 5 - 5.06.841.1-5.08.841.6 & NEW 5.08.841.8
Hi All
For all the Aussie's (and anyone else) Developers out there,
I'm introducing the Telstra stock rooted JB 4.2.2 Sense 5 ROM based on Telstra full upgrade phone dump. Feel free to use as base for your own work or use this ROM to do as you choose.
ADDED 5.08.841.3 UPDATE
ADDED 5.08.841.6 UPDATE
ADDED NEW 5.08.841.8 UPDATE
This will install the stock up to date kernel so you must be S-OFF as you risk a brick !
DISCLAIMER
I can't and will not take any responsibility whatsoever for any anything that may happen to you or your phone as a result of flashing this ROM!
REQUIREMENTS
Must be Unlocked and Rooted and have S-OFF!
INSTALL INSTRUCTIONS
Make a Nandroid back up before installing
Download zip and place on sdcard;
Boot into recovery via fastboot
I say again make sure you have a Nandroid back up before installing!
Factory reset device
Make sure Zip file signature verification is unchecked/not on
Install zip from SD card
Reboot and enjoy!
Don't forget that you should update SU Binaries immediately after install if needed!
NOT WORKING
you tell me
LINK to 5.06.841.1
Stock Telstra JB 4.2.2 - 5.06.841.1 Rom with Root access
MD5:
8cf9d635123f2adafb6f59ec0bb2100f
LINK to 5.08.841.3
Stock Telstra JB 4.2.2 - 5.08.841.3 Rom with Root access
MD5:
99652864b059895cc3085e1341413723
LINK to De-odexed 5.08.841.3
Stock Telstra JB 4.2.2 - 5.08.841.3 Rom with Root access DE-ODEXED
MD5:
73447bb462b60d4ecc13932870ea3270
LINK to 5.08.841.6
Stock Telstra JB 4.2.2 - 5.08.841.6 Rom with Root access
MD5:
3211577675b1790d4482d4d56b522cfb
LINK to De-odexed 5.08.841.6
Stock Telstra JB 4.2.2 - 5.08.841.6 Rom with Root access DE-ODEXED
MD5:
475577ac43d10b84539febe8256ed6a6
LINK to 5.08.841.8
Stock Telstra JB 4.2.2 - 5.08.841.8 Rom with Root
MD5:
ebd51587b9e18aaa46410f42e7d3d586
Notes:
-After installing you have the option of having blinkfeed installed or not(clear it via notification)
-If you experience data drops, flash zarboz's kernel
-And/Or download firmware update from Turge's Stock Rom
BUT MAKE SURE YOU READ THE INSTRUCTIONS
timmaaa said:
This is a stock ROM but because it's not running on the firmware update that it came bundled with in the OTA update there's some kind of mismatch happening, thus causing these signal drops and random reboots. If you plan on trying the latest Telstra radio I'd suggest taking the firmware update route, I flashed the radio while still on the 2.14 hboot and it performed terribly. I think it works like this:
If you're on hboot 2.15, previous radios work terribly but latest works well.
If you're on <2.15 previous radios work well but latest radio works terribly.
I've only tested while on the lower hboot (<2.15) so far though.
Click to expand...
Click to collapse
radavs said:
I can understand most peoples frustration but from my testing I can confirm that if you are on the 1.09 Hboot and you use any of the JB 4.2.2 roms you are going to have these issues. As soon I upgraded through all Hboots(RUU+OTA's) to 2.15 I have had trouble free service on a stock & beastmode kernals.
Click to expand...
Click to collapse
Things that work with this ROM
- Beastmode Reloaded 3.5 kernel
Things that DON'T work with this ROM
- You tell me
-I don't know if zoe mod works with this(it should) as I don't care for this mod
I have installed Xposed framework and now have APM, themed icons, modified notification bar.
Running Beastmode kernel.
So far running a lot smoother than any other rom I've used before.
What's the difference between this and the tmobil port?
Sent from my HTC One XL using xda app-developers app
angramenyu said:
What's the difference between this and the tmobil port?
Sent from my HTC One XL using xda app-developers app
Click to expand...
Click to collapse
More than likely nothing really. Its just another base.
Sent from my HTC One XL using xda app-developers app
angramenyu said:
What's the difference between this and the tmobil port?
Click to expand...
Click to collapse
T-Mobile 5.08 isn't a port and neither is this Telstra ROM.
Both are stock ROMs.
Differences will be carrier apps, carrier settings like APN, default qwerty keyboard, language, build.prop settings like fingerprint and such.
Anything pulled the radio out of this yet?
Master_falco said:
Anything pulled the radio out of this yet?
Click to expand...
Click to collapse
Both Telstra 5.06 and T-Mobile 5.08 are using the same radio. I believe both are using 1.31a.32.45.16_2_10.141.32.34a
If you want the Telstra radio - http://forum.xda-developers.com/showpost.php?p=45543810&postcount=1249
radavs said:
I have installed Xposed framework and now have APM, themed icons, modified notification bar.
Running Beastmode kernel.
So far running a lot smoother than any other rom I've used before.
[/QUOTE
I agree I've been running this since last night and it is just like butter.
It also seems faster than the other base. with less glitches.
It rebooted once but since I installed beast mode problem free.
Thanks
Click to expand...
Click to collapse
Very stable... No data, signal drop, no random reboot, great battery life with stock kernel. Tks u so much!
Sent from my HTC One XL using Tapatalk 2
Awesome ROM
everything works and have had no issues just running as is, no Beastmode or anything.
Downloaded and installed as soon as u finished the upload!
vangoogle said:
Awesome ROM
everything works and have had no issues just running as is, no Beastmode or anything.
Downloaded and installed as soon as u finished the upload!
Click to expand...
Click to collapse
I've been running Beastmode for 5 days on this without issues compared to a few reboots on viper 4 & 4.1.
You should try it if you want the extras from the his Kernel
radavs said:
I've been running Beastmode for 5 days on this without issues compared to a few reboots on viper 4 & 4.1.
You should try it if you want the extras from the his Kernel
Click to expand...
Click to collapse
OK will do as I love the S2W feature!!
I wanted to try to download your rom to rebase mine but the download speeds were unexceptable. It was never going to finish at that rate. Had to cancel it.
ImagioX1 said:
I wanted to try to download your rom to rebase mine but the download speeds were unexceptable. It was never going to finish at that rate. Had to cancel it.
Click to expand...
Click to collapse
Might want to try again, I am DL'ing at 5 meg, just under 2 minutes to finish.
Great work. I've been waiting for stock Telstra Rom to drop. Just flashed this morning and running beastmode. Have xposed with sense toolbox. Running great so far. Thanks.
Can some one running this ROM check if you can move app to internal storage in the app info screen.
Sent from my HTC One XL using Tapatalk 4
yobbei said:
Can some one running this ROM check if you can move app to internal storage in the app info screen.
Sent from my HTC One XL using Tapatalk 4
Click to expand...
Click to collapse
I believe that feature has been removed on these latest updates, you can do it via Titanium though.
Sent from my Evita
ImagioX1 said:
I wanted to try to download your rom to rebase mine but the download speeds were unexceptable. It was never going to finish at that rate. Had to cancel it.
Click to expand...
Click to collapse
Yes ! I sure abt that very stable than 5.08 base T-mobile ! dont have even one problem ! hope you release new rom with 5.06 base soon ! tks man for everything
Hi I am running with xposed framework and xprivacy on the Optus network in aus. I am getting numerous reboots and the mobile network drops out, seemingly, when the phone sleeps. I am also getting calls dropping out. This came from a clean flash. Is anyone else having similar issues? Is there some edits that need to be made to build.prop for Optus?
Thx
Sent from my HTC One XL using xda app-developers app
Related
I installed the JB ROM JellyTime Beta 7 fine. When I installed JellyTime Beta 8, it hung on the Jellybean boot screen. The OP of the JellyTime thread told someone else with the same problem to update their ADSP firmware for new kernels. I searched and searched, but I couldn't find a reference to how do do that or what it even really was. Could anyone help point me in the right direction?
bananagranola said:
I installed the JB ROM JellyTime Beta 7 fine. When I installed JellyTime Beta 8, it hung on the Jellybean boot screen. The OP of the JellyTime thread told someone else with the same problem to update their ADSP firmware for new kernels. I searched and searched, but I couldn't find a reference to how do do that or what it even really was. Could anyone help point me in the right direction?
Click to expand...
Click to collapse
Sure wish i could get some help with this too.
Have you guys tried the latest releases? When full wiping include format all partitions except sd card.
Sent from a dream.
What latest releases are you referring to? Could you please be more specific?
EDIT: I did a full wipe and reformat of everything, including system, data, and cache.
Right now they are on beta 10. Funny thing, I don't recall anyone mentioning a need to do a adsp firmware update. I don't even know what it is.
Sent from a dream.
I upgraded my radio and ril and it still would not work. I then flashed a stock htc ROM that had sense 3 and then it would take beta 10.
Sent from my Desire HD using xda app-developers app
jlochamy said:
I upgraded my radio and ril and it still would not work. I then flashed a stock htc ROM that had sense 3 and then it would take beta 10.
Click to expand...
Click to collapse
Are you referring to this one?
bananagranola said:
Are you referring to this one?
Click to expand...
Click to collapse
That is the one. But if you don't do a full wipe before you do beta 10 it will have errors. It would still boot but have lots of errors.
Sent from my Desire HD using xda app-developers app
In case anyone is looking for a solution and finds this thread, I can confirm that flashing the stock ROM, wiping, and flashing Beta 10 works.
bananagranola said:
In case anyone is looking for a solution and finds this thread, I can confirm that flashing the stock ROM, wiping, and flashing Beta 10 works.
Click to expand...
Click to collapse
It worked for me as well.
along the same discussion I'd like to ask another question about the new 3.0 kernel.
I'm a weekly ROM changer and usually run IceColdSandwich. Once I switch back to ICS and want to reflash JT to check out the latest improvements/updates, do I have to re-flash the GizRoot_v_2 with the 3.0 kernel then flash JellyTime? Would it work If I did a backup of JellyTime and tried to restore it when a new update comes out or does it become non flashable once I've returned to the older ICS kernel?
In other words, can I flash between ICS and JT without having to go through all the steps to reload the 3.0 kernel?
Thanks in advance to a great community!
uss..p8triot said:
It worked for me as well.
along the same discussion I'd like to ask another question about the new 3.0 kernel.
I'm a weekly ROM changer and usually run IceColdSandwich. Once I switch back to ICS and want to reflash JT to check out the latest improvements/updates, do I have to re-flash the GizRoot_v_2 with the 3.0 kernel then flash JellyTime? Would it work If I did a backup of JellyTime and tried to restore it when a new update comes out or does it become non flashable once I've returned to the older ICS kernel?
In other words, can I flash between ICS and JT without having to go through all the steps to reload the 3.0 kernel?
Thanks in advance to a great community!
Click to expand...
Click to collapse
Nope. You only need to flash the stock once; after that, flash back and forth to your heart's content.
uss..p8triot said:
In other words, can I flash between ICS and JT without having to go through all the steps to reload the 3.0 kernel?
Thanks in advance to a great community!
Click to expand...
Click to collapse
IceColdSandwich runs on a 2.6.5 kernel, and will not work with a 3.0 kernel. Jellytime runs on a 3.0 kernel and will not work with a 2.6.5 kernel. Both of those ROMS have their respective kernels included. You only have to flash the ROM. I'd also recommend a full wipe before each flash as well.
sent from my IceCold Inspire 4G
fatboyRICH said:
IceColdSandwich runs on a 2.6.5 kernel, and will not work with a 3.0 kernel. Jellytime runs on a 3.0 kernel and will not work with a 2.6.5 kernel. Both of those ROMS have their respective kernels included. You only have to flash the ROM. I'd also recommend a full wipe before each flash as well.
sent from my IceCold Inspire 4G
Click to expand...
Click to collapse
usspatriot is actually referring to a separate question. Some of us need to update our firmware to run JB, which can only be done by flashing the latest stock before flashing JB. He wanted to know if the updated firmware would be overwritten by flashing ICS, requiring a reflash of stock before reflashing JB. The ICS and JB kernels are not at issue.
I wonder if this has anything to do with my issue with JB on a Desire HD:
I came from SmartDroid_Reloaded_wwe_1.5.2, did a full wipe, installed, everything works fine for me except for cellular data.
I'm wondering if it's something to do with JB not liking my phone? I've also tried a couple of ICS roms.. See below:
SmartDroid_Reloaded_wwe_1.5.2 = cell data works
Sabsa_Prime_v5.0 = cell data works
TrickDroid_v1.1.1 = cell data works
cm-cfX-20120925-OFFICIAL-ace = no cell data
cm-JellyTime_R10 = no cell data
cm-JellyTime_R10.1 = no cell data
cm-JellyTime_R11 = no cell data
i set my APN's to suit my network (crazy johns in australia) but nothing works..
If i connect to wifi, both the wifi signal and cell signal turn blue, if i disconnect from wifi, both turn grey.
MMS, SMS, Phone calls work fine..
Click to expand...
Click to collapse
This is my personal SystemUI.apk I use on CleanROM. Figured I would share it here, Anyone is welcome to use it or icons etc in it at will.
Most of the icons came from the UOT Kitchen with the exception of the 4G icon, it came from another mod here on XDA, I combined those with some from my wifes Galaxy note and created this cool themed SystemUI apk. Updater zip provided by team nocturnal.
Works with:
CleanROM latest version
Check out the photos below.
Disclaimer: as usual im not responsible for any damage you or your phone may suffer from this flash. Tested and working on CleanROM latest version. If your use another ROM and flash this and it works fine please tell me so I can add that rom/version to the works with list.
Installation:
1. Download modifiedsystemui.zip to sdcard
2. Backup current SystemUI.apk located in system/app to sdcard in a place you can find it and on your pc
3. Reboot to TWRP recovery
4. Flash zip
5. Wipe dalvik/cache
6. Reboot enjoy
If you want to return to your previous systemui.apk simply replace your backed up systemui.apk with 7zip in the zip file deleting the modified one and flash it.
Download
MD5: 1fbc656cdf16ebcfc8e86bd08ec84a3e
Nice.
Where have you been.. haven't seen you in like 4 months
absolutelygrim said:
Nice.
Where have you been.. haven't seen you in like 4 months
Click to expand...
Click to collapse
Without a PC in an academy lol im back now though.
eraste said:
Without a PC in an academy lol im back now though.
Click to expand...
Click to collapse
Nice to see you back
Sent from my HTC One XL
Work with
This mod work only in CleanROM? Or anothers ROMs? Thanks
poru said:
This mod work only in CleanROM? Or anothers ROMs? Thanks
Click to expand...
Click to collapse
This particular one is meant for cleanrom only.
this does not work with the current clean rom. I have the current scott clean rom and this crashes the ui
Okay I know what is wrong. Not all clean roms are on jelly bean. If this is ice cream sandwich then this won't work for anyone with jelly bean. Visa versa I'll work on it tonight and help some people out if they need it. It's what I used to do anyways
Sent from my HTC One X using xda app-developers app
Megadoug13 said:
Okay I know what is wrong. Not all clean roms are on jelly bean. If this is ice cream sandwich then this won't work for anyone with jelly bean. Visa versa I'll work on it tonight and help some people out if they need it. It's what I used to do anyways
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Correct this is for cleanrom ICS only. If you can whip one up that will work with the jellybean base thanks!
I have almost the same icons, but I also have modified GPS, Bluetooth and headphone/headset icons. And my signals bars have been modified to show 5 bars and turn red when 2 bars or less. If anyone is interested I can post it. FYI, I have working on cr6 but can make work on pretty much any Rom.
Sent from my HOX via Tapatalk 2
moto g with pac rom falcon 4.4.4
i am using mogo g with pac rom falcon 4.4.4 and systemui not working and i can't able to use my phone.:crying:
ofcourse it isnt working it was made for cleanrom for the htc one xl running ics which makes this an old mod anyways . you are on a completely different device running an aosp rom.
Will this work with mircomax canvas A300 clean rom?
Running 4.4.2
kernel 3.4.67
Feel free to use this but I accept no responsibility for the results - read up before you flash!
This is a collaboration between radavs and me and is primarily for Telstra users but can be modified for any carrier in build.prop.
I use this on a daily basis and have had no issues for a week solid.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
All apps working - including video camera.
Removed some bloat (Telstra Navigator, Google plus, Polaris, pdf viewer)
English language only - other languages removed - they can be pulled from the original OTA zip (which can be found here on the forums) and added to the rom.zip before flashing.
There are no screen shots because we all know what a stock rom looks like......
DOWNLOADS:
Rom http://www.4sync.com/zip/_8CLQVVk/radavs-pablo11-TelstraJB-stock.html MD5 e49ec694f7d22bc37b851a2365f4dad4
Radio http://www.vangoogle.com.au/HTC_oneXL/EVITA_HTCTelstra_JB_Radio.zip - Thanks for the mirror vangoogle!
Flashing Instructions:
1)Perform a backup and then a FULL wipe in TWRP and Flash the Telstra JB radio zip.
2)Flash the rom zip and boot up.
I use System Tuner to overclock and disable the power notification - have fun!
Thanks to radavs and the people mentioned here and the XDA community:good:
Reserved - just in case.
An extra note: I am on hboot 1.09 - I cannot garuntee this will work with other hboot versions.
Thanx Pablo11
Love you have done this!
Couple things:
I am on hboot 1.14 but have flashed the boot.img file from JB ROM already when running Jokers ROM so I cant say if it was required to be done or not.
Wiper had error twice on startup and then is fine, however I removed wiper.apk and the odex for it from zip and rewiped and reflashed.
Added Superuser.apk to apps folder (in ROM zip file before flashing) and it installs with ROM no probs.
When checking with 3G/4G Speed Optimizer pro it states /24/6 when with ICS it used to be 12/24/6 and I found line "ro.ril.gprsclass=12" missing from build.prop.
Mind you this is also missing from the stock JB Telstra ROM OTA update file so have left it out until I can do some 4G speed tests.
This is all I have found and will be running this 24/7 and will let you know how it goes. Thanx heaps for doing this as I have no idea how to root etc the OTA and wanted the stock Telstra settings in my device so this is awesome!!
Triple thumbs up!!
Nice work Pablo11
I will give this one a try soon
Any change from the Asia build to this one looks like the same build number
Err base I mean
Sent from my HTC One X using Tapatalk 2
Can anyone please mirror the Rom and Radio ?
Thanks
Can someone post the build.prop from this one?
Sent from my HTC One X using xda app-developers app
dnorthington said:
Can someone post the build.prop from this one?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
View attachment build.zip
vangoogle said:
Thanx Pablo11
Love you have done this!
Couple things:
I am on hboot 1.14 but have flashed the boot.img file from JB ROM already when running Jokers ROM so I cant say if it was required to be done or not.
Wiper had error twice on startup and then is fine, however I removed wiper.apk and the odex for it from zip and rewiped and reflashed.
Added Superuser.apk to apps folder (in ROM zip file before flashing) and it installs with ROM no probs.
When checking with 3G/4G Speed Optimizer pro it states /24/6 when with ICS it used to be 12/24/6 and I found line "ro.ril.gprsclass=12" missing from build.prop.
Mind you this is also missing from the stock JB Telstra ROM OTA update file so have left it out until I can do some 4G speed tests.
This is all I have found and will be running this 24/7 and will let you know how it goes. Thanx heaps for doing this as I have no idea how to root etc the OTA and wanted the stock Telstra settings in my device so this is awesome!!
Triple thumbs up!!
Click to expand...
Click to collapse
Damn! I thought I pulled out that wiper.apk! It's useless anyway.
Thanks for the superuser feedback. I did add the binaries to the rom but not the superuser apk. At the time I built this there were root issues and feedback was to flash the zip. Shows how long ago I built it
To be honest optimizer pro is not needed with these new roms. I am getting best ever speeds with this rom and I hardly ever use LTE.
I did notice some changes in the build.prop and the line you mention is one of them.
Seems like some values are not needed on Telstra's newer network.
Sorry about the dowload links everyone. I have a 3 day suspension from Dropbox and nowhere else to upload it
CheesyNutz said:
Any change from the Asia build to this one looks like the same build number
Err base I mean
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
Not that I know of. The release is basically the same but the Video camera is working well and it's really just so Telstra users have a base with their settings as stock. I just like the smoothness on this build too.
Anyone tested Google Movies with this? The Asia update seems not to allow rented movies.
Sent from my Transformer Prime TF201 using Tapatalk 2
Seems like no minor link here. can you send me your dropbox link for this Stock rooted odexed JB Telstra_WWE_3.17.841.2 rom? thanks.
thevasko said:
Seems like no minor link here. can you send me your dropbox link for this Stock rooted odexed JB Telstra_WWE_3.17.841.2 rom? thanks.
Click to expand...
Click to collapse
Sorry mate - my Dropbox has been suspended. Maybe one of the guys that has downloaded it already could put up another link....
tangiers said:
Anyone tested Google Movies with this? The Asia update seems not to allow rented movies.
Sent from my Transformer Prime TF201 using Tapatalk 2
Click to expand...
Click to collapse
I must admit - I've never used it......
Mirror Radio & Rom please anyone
Ok I've modified Pablo11 rom to include the kernal, SU and working wiper(so no error while loading)
I'm at work atm so I will post it here once I have uploaded it to my server after work(which maybe 12am and onwards)
PS. Local time is 11:45am
Thanks mate. I really appreciate it. I just don't have the time to invest but I wanted to get it out there for people.
Cheers.
Sent from my HTC One XL using xda premium
Thanks RADAVS also PABLO11 you both are the best. actually i have got OTA JB Stock ROM too downloaded by my ONE XL. But cant installed saying error guess because i did have custom 2.40 custom ROM installed. trying to find RUU EVITA UL TELSTRA WWE 2.40.xxx cant find anywhere plus cant go back to RUU EVITA UL TELSTRA WWE 1.89.xxx due to has been official OTA from 1.89 - 2.40 by Telstra awhile ago stupid me just cant wait for JB thats why decided to do custom JB Rom and dont like it prefer Stock Rom. Would be nice if Telstra do RUU not OTA.
thevasko said:
Thanks RADAVS also PABLO11 you both are the best. actually i have got OTA JB Stock ROM too downloaded by my ONE XL. But cant installed saying error guess because i did have custom 2.40 custom ROM installed. trying to find RUU EVITA UL TELSTRA WWE 2.40.xxx cant find anywhere plus cant go back to RUU EVITA UL TELSTRA WWE 1.89.xxx due to has been official OTA from 1.89 - 2.40 by Telstra awhile ago stupid me just cant wait for JB thats why decided to do custom JB Rom and dont like it prefer Stock Rom. Would be nice if Telstra do RUU not OTA.
Click to expand...
Click to collapse
Well, don't worry - you will be able to use this once radavs has uploaded it tonight - tomorrow.
It's a very nice base. Very smooth and reliable.
radavs said:
Ok I've modified Pablo11 rom to include the kernal, SU and working wiper(so no error while loading)
Click to expand...
Click to collapse
Just out of interest, how did I break the wiper app?
I actually forgot to remove it. I was told it's just another way of Google knowing where you are. I don't like the way they do that stuff without telling us.
Sent from my HTC One XL using xda premium
I started this to see if anyone can list a few ROMs that work with T-Mobiles htc one s. Please help by listing the ROM you are on and by saying if the ROM has any issues; such as WiFi not working for example.
Sent from my HTC One S using xda app-developers app
I'll be first
Cm10 nightly- works excellent but it takes WiFi about 5 mins to kick in after I toggle it. If any one knows how to fix it please reply to this post
Sent from my HTC One S using xda app-developers app
I've been using $droyd$'s AOKP 4.2.2 ROM and the only issue is that as of right now, you can't record in 1080p. Other than that, its very smooth and fast.
Also if you were unaware before, wifi-calling doesn't work on any jelly bean rom.
Good luck!
Sent from my HTC One S using xda premium
tjsinghlion said:
I started this to see if anyone can list a few ROMs that work with T-Mobiles htc one s. Please help by listing the ROM you are on and by saying if the ROM has any issues; such as WiFi not working for example.
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
WIFI issues are a nuance of this phone and the tmobile seems to be the most affected - it's different for each access point, user, phone, rom and firmware. In short you'll have to try it.
My tmobile worked with wifi on CM10 and CM10.1, it would not work with Viper until I downgraded my hboot (partial s-off enables some firmware write access) and flashed my wifi firmware. It get's interesting - I then put the old firmware back and the wifi still worked!!
Did you see the S-OFF thread? This will enable you to flash the radio firmware which will solve any problems.
Remember your WIFI channels - different countries use different range of channels and some access points 'helpfull' set the channel automaticlly. I have many devices that cannot cope with channel12.
Not trying to be a buzz kill here, but what's the purpose of this thread? I mean the Dev section is right over there, and the first page is flowing with fully working or close to fully working new ROMS.
Just saying.
I see what your saying. But honestly when you go through the a certain ROMs thread, they never say how WiFi doesn't work on T-Mobile phones. Or any of the problems Tmobiles users face.And who wants to go through a thread having to look for that one specific detail about a ROM whether or not to see if WiFi works. Also when looking through these ROM threads you find people that just like to say thank you (which there is nothing wrong with) that fill up the pages, making it harder to know if everything in that ROM is really going to work on your tmobile HTC one s, because people do search through comments to see what the users say. Therefore I made this thread for all T-Mobile users who want to post and say whether their ROM they are using works perfectly or if they are experiencing problems. And who wants to go through the process of flashing a new ROM without even knowing whether something like WiFi works. So yeah that's why i made this thread
Sent from my HTC One S using xda app-developers app
I get that, ROM posts can be a little all over the place sometimes. I didn't understand at first; I'm one of the few T-Mo users with pretty much no problems. It also doesn't help that the ROM database that some guy did in the Dev section hasn't been updated for some time.
Thankyou
skyline93r34 said:
I've been using $droyd$'s AOKP 4.2.2 ROM and the only issue is that as of right now, you can't record in 1080p. Other than that, its very smooth and fast.
Also if you were unaware before, wifi-calling doesn't work on any jelly bean rom.
Good luck!
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Ok thank you. Now i think im going to go Flash that rom. And also did you do anything specific to get your wifi working. and what Hboot are you on
If you are S-ON and have high HBOOT and want a Sense-based ROM with working WiFi, you were looking at TrickDroid 7 (TMOUS based), Unknown Retribution, and I think one more (Energy Blue, IIRC) that were based on recent updates. Since they were all based on the TMOUS ROM, everything should work without doing anything super special, including WiFi-calling. Virtuous Ville+ also had working WiFi, but no WiFi-calling. Recent CM 10.1 nightlies are working really well. At least, those are the ROMs I've used.
ardax said:
If you are S-ON and have high HBOOT and want a Sense-based ROM with working WiFi, you were looking at TrickDroid 7 (TMOUS based), Unknown Retribution, and I think one more (Energy Blue, IIRC) that were based on recent updates. Since they were all based on the TMOUS ROM, everything should work without doing anything super special, including WiFi-calling. Virtuous Ville+ also had working WiFi, but no WiFi-calling. Recent CM 10.1 nightlies are working really well. At least, those are the ROMs I've used.
Click to expand...
Click to collapse
Wait are you saying that Recent cm10.1 nightlies have wifi working on our device. and by wifi working i mean it automatically turns on, and not just hangs and turns on later .
I haven't had any WiFi hangs.
I just started using Liquid Smooth. Pretty nice IMO. The only issues I've notcied were a bluetooth hang that fixed after a reboot, and Voice search keeps crashing.
ardax said:
I haven't had any WiFi hangs.
Click to expand...
Click to collapse
so let me ask you a question. What radio are you on. And also what HBOOT version are you running
tjsinghlion said:
so let me ask you a question. What radio are you on. And also what HBOOT version are you running
Click to expand...
Click to collapse
Right now I'm on Viper 2.1.0 with the full firmware from the 3.16 WWE OTA -- I only made that jump because S-OFF makes it easy to switch without having to downgrade HBOOT. So HBOOT is 2.15 and Radio is 1.11.50.05.28. But I've just started using that and can't give you much in the way of impressions on WiFi stability yet. Just flashed it last night and didn't have any WiFi problems downloading my apps last night or weather checks this morning.
Before that I was using a recent CM 10.1 nightly on the TMOUS 2.35.531.10 firmware. So HBOOT 1.14 and 1.11t. I ran that firmware combination from shortly after its release until flashing Viper. ROMs in use were either CM 10.1 nightlies or Unknown Retribution (TMOUS 2.35 based).
ardax said:
Right now I'm on Viper 2.1.0 with the full firmware from the 3.16 WWE OTA -- I only made that jump because S-OFF makes it easy to switch without having to downgrade HBOOT. So HBOOT is 2.15 and Radio is 1.11.50.05.28. But I've just started using that and can't give you much in the way of impressions on WiFi stability yet. Just flashed it last night and didn't have any WiFi problems downloading my apps last night or weather checks this morning.
Before that I was using a recent CM 10.1 nightly on the TMOUS 2.35.531.10 firmware. So HBOOT 1.14 and 1.11t. I ran that firmware combination from shortly after its release until flashing Viper. ROMs in use were either CM 10.1 nightlies or Unknown Retribution (TMOUS 2.35 based).
Click to expand...
Click to collapse
noob question- What do you mean by TMOUS 2.35 based. And how does that affect the cm10.1 nightly
I mean ROMs that were built using T-Mobile US's 2.35 ROM as a base. Other Sense-based ROMs, like Viper, start with different ROMs as a base. The different Sense bases are part of the reason people run into WiFi problems when using ROMs originally created for other regions.
CM 10.1 has an entirely different heritage so it has its own ways of dealing with those issues.
tjsinghlion said:
Ok thank you. Now i think im going to go Flash that rom. And also did you do anything specific to get your wifi working. and what Hboot are you on
Click to expand...
Click to collapse
I'm on hboot 1.09 and the wi-fi worked right from the start.
p.s. sorry for the slow reply
Gotta Tell you the Viper 2.1.0 rocks...its fast awesome battery life and its got working wifi...not wifi calling but just wifi in general...it honestly is the best sense ROM...I have tried CM 10, Virtuous Ville+, P.A.C Man and even the ICS ROMs and I gotta say the Venom team makes an awesome product...:laugh:
"[rom][S4][15FEB]Updated_4.2.2_AOKP-Working-video" seems to work great with TMOUS hboot 1.14, added the new camera (in the post) with photosphere, The only little bug I found is the bluetooth doesn't list station info on my car stereo. I saw a tearing fix using bubba kernel, but I'm just living with it for now. Everything else seems to work great!
I just flashed the LiquidSmooth JB ROM from Droyd and this thing is amazing.. Coming from a rooted Stock Sense there really is no comparison, I might give Viper a try but this is clearly gonna be my daily driver
was testing/helping troubleshoot out a modded version of kitchen by dsixda(thank him) for the sr and it worked so i decided to share it, also users had requested one that was untouched
made from the official tar from sammobile
your choice, odexed or de-odexed, untouched, includes stock radio(ruxumay7), kernel, system, preload, but no recovery
zipaligned and signed
install w/latest recoveries, im using twrp
i tested it for a short time everything seems to work
INSTRUCTIONS
CHECK MD5 OF ROM
FULL WIPE
FLASH ROM - will take awhile
REBOOT
WAIT A FEW MINUTES TO SETTLE
SETUP YOUR APNS IF NEED BE
OPTIONAL: MAKE IT FASTER > GOTO SETTINGS>DEVELOPER OPTIONS>HIT ENABLE>CHANGE VALUES OF "WINDOW ANIMATION SCALE" , "TRANSITION ANIMATION SCALE" AND "ANIMATOR DURATION" FROM 1 TO 0.5(OR "0") >THEN REBOOT - should work w/out reboot though
DOWNLOADS
AFAIK ALL DEVHOSTS FILES ARE BAD/FAKE, I CANT EVEN DL MY OWN FILES, CLICK AT YOUR OWN RISK.
ROGERS OFFICIAL SAMSUNG JB 4.1.2 UNTOUCHED Odexed
ROGERS OFFICIAL SAMSUNG JB 4.1.2 UNTOUCHED DE-odexED
"im not a dev, i just know how todo stuff"
reserved
I wonder if this will work for the unlock free process. If I get motivated I'll try it.
Thanks vincom!
Thanks, Brutha. I was one of the guys looking for this I'm on a T989 so flashing via Odin was not possible. Just made a donation, not much but wanted to show some appreciation.
added a de-odexed version
Re: [ROM] ROGERS OFFICIAL SAMSUNG JB 4.1.2 odexed & DE-odexed UNTOUCHED mar 07/2013
I'm curious... Is there an advantage to running stock over dev. Roms outside the obvious if you need to take it into rogers or just checking ot out?
Sent from my SGH-I727 using xda app-developers app
pilotgav said:
I'm curious... Is there an advantage to running stock over dev. Roms outside the obvious if you need to take it into rogers or just checking ot out?
Sent from my SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I suspected the stock kernel would have better call quality and in fact it does. That was the only reason I was seeking an untouched CWM/TWP zip.
Re: [ROM] ROGERS OFFICIAL SAMSUNG JB 4.1.2 odexed & DE-odexed UNTOUCHED mar 07/2013
muniz_ri said:
I suspected the stock kernel would have better call quality and in fact it does. That was the only reason I was seeking an untouched CWM/TWP zip.
Click to expand...
Click to collapse
That's a darned good reason.
Sent from my SGH-I727 using xda app-developers app
Re: [ROM] ROGERS OFFICIAL SAMSUNG JB 4.1.2 odexed & DE-odexed UNTOUCHED mar 07/2013
muniz_ri said:
I suspected the stock kernel would have better call quality and in fact it does. That was the only reason I was seeking an untouched CWM/TWP zip.
Click to expand...
Click to collapse
Um no that's either in your head or a decent modem.
The only real advantage of stock is supposed "stability".
There's honestly no real difference but preference.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
mtdew said:
Um no that's either in your head or a decent modem.
The only real advantage of stock is supposed "stability".
There's honestly no real difference but preference.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Is that rooted?
Re: [ROM] ROGERS OFFICIAL SAMSUNG JB 4.1.2 odexed & DE-odexed UNTOUCHED mar 07/2013
ratatouille said:
Is that rooted?
Click to expand...
Click to collapse
Is what rooted?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Good rom but two issues
Using CWM to flash on my AT&T I727 Skyrocket. It seems working well. However there are two issues: 1. When booting it shows "Android upgrading". Doesn't impact usage but annoying. 2. When plug it to charger, it turns on itself. Is this the compatibility problem between Roger version firmware and AT&T version hardware?
charmforyou said:
Using CWM to flash on my AT&T I727 Skyrocket. It seems working well. However there are two issues: 1. When booting it shows "Android upgrading". Doesn't impact usage but annoying. 2. When plug it to charger, it turns on itself. Is this the compatibility problem between Roger version firmware and AT&T version hardware?
Click to expand...
Click to collapse
Does it always show Android upgrading or was it just on the 1st boot after flashing the rom?
As for turning on when plugging it in, probably a setting set to power on or wake up when plugged/unplugged.
Is the rom rooted?
charmforyou said:
Using CWM to flash on my AT&T I727 Skyrocket. It seems working well. However there are two issues: 1. When booting it shows "Android upgrading". Doesn't impact usage but annoying. 2. When plug it to charger, it turns on itself. Is this the compatibility problem between Roger version firmware and AT&T version hardware?
Click to expand...
Click to collapse
If it always shows android upgrading then it does that because you didn't wipe data/factory restore & wipe cache & wipe dalvik like you should before flashing any rom.
Have never experienced number 2 though.
Flashed on a friends phone he claims it is running very smoothly, Anyone sure if with just the AT&T LTE APN will auto switch to HSPA+ if LTE is unavailable ?
Re: [ROM] ROGERS OFFICIAL SAMSUNG JB 4.1.2 odexed & DE-odexed UNTOUCHED mar 07/2013
bryhe1 said:
Flashed on a friends phone he claims it is running very smoothly, Anyone sure if with just the AT&T LTE APN will auto switch to HSPA+ if LTE is unavailable ?
Click to expand...
Click to collapse
Yes it does
Sent from my SAMSUNG-SGH-I727
I'm getting the process com.android.phone has stopped. Any ideas ? I'm on AT&T Sr
Thanks
i727 AT&T
jerzey111 said:
I'm getting the process com.android.phone has stopped. Any ideas ? I'm on AT&T Sr
Thanks
Click to expand...
Click to collapse
I am thinking of flashing it to my AT&T i727, any feedback from AT&T users who have flashed it would be appreciated. Also is there any improvement in the battery life over ICS? Last thing that is it rooted?
Thanks
desiwizard said:
I am thinking of flashing it to my AT&T i727, any feedback from AT&T users who have flashed it would be appreciated. Also is there any improvement in the battery life over ICS? Last thing that is it rooted?
Thanks
Click to expand...
Click to collapse
Let me know how it goes. I was unsuccessful at flashing but would like to try this rom for the call quality as stated by some users