[Q] G2X screen not visible - T-Mobile LG G2x

Afternoon all. I know the title might seem like a BSOD post but my situation is different. I've searched but can't come up with anything.
When I turn my phone on, it completes the boot but the screen never appears. How do I know it's on? Three things, the ROM I'm using, Eagle'sBlood I think, has an engine revving theme instead of standard Android chime. Second,the menu, home, back space and search buttons on the G2X body illuminate. Lastly, if I swipe in the area where I think the unlock icon should be, the phone unlocks. If I hold down the power button and wait for the shutdown notice, I can guess the 'Do You want to shut down' and 'confirm shut down' icons and the phone turns off.
I've tried removing the battery, SD card, sim card and rebooting in each variation but with no luck. The phone has been rooted for over a year and so I tried booting into CWM (powerbutton, down volume). I think I'm getting into CWM fully but without the ability to see the screen I can't navigate.
This started happening yesterday. I was listen to Pandora and using a GPS app to track my run. The battery died during. I plugged it in for several hours but haven't seen the screen display since.
Any suggestions? If this is a hardware issue I'll get a new phone but without being able to see the screen, I'm not sure how to diagnose the problem. Other than rooting and changing the ROM, the phone is stock. The issue I had before this is the battery icon doesn't display. It just shows a battery outline with a ?-mark inside. The battery level only shows when the phone is charging and powered off.
Your help is greatly appreciated.
G2X - LG P999DW
Rooted
ROM: Eagles Blood (unsure of version)
maurice

Really sounds like a dead lcd or maybe just the backlights. I don't really know how the backlight works on this phone but typically if there is video but no light you can put a flashlight onto the screen and barely make out the display around the flashlight. Either way it sounds like hardware.

Twitch - Thanks for the reply. I'm not 100% sure what you mean by backlights though. When the phone is on and the screen is not asleep I see lights around the edges but the screen itself is black. For my own knowledge is LCD and 'digitizer' synonymous? I saw another thread describing how to replace the digitizer for $60-75.
I'll try checking it with a flashlight when I get home.
TwitchyEye said:
Really sounds like a dead lcd or maybe just the backlights. I don't really know how the backlight works on this phone but typically if there is video but no light you can put a flashlight onto the screen and barely make out the display around the flashlight. Either way it sounds like hardware.
Click to expand...
Click to collapse
I know there is an opinion thing but what is a good upgrade from the G2x for a non-hardcore user? I rooted and changed the ROM b/c you guys made it so easy to do, not b/c I was looking for the phone to do more than it already does. Up until this, and the battery display issue, and a wifi issue I forgot to mention, I've been happy with the G2x but there is no reason to spend $100+ repairing a 2+ year old phone that I pickup used off CList in Q1, 2012 if I can find something better on the used market for $200
maurice

Yeah I'm not too sure how these phones are set up, I have more experience with lcd monitors and such. But I think it is all in one piece on phones.
If you're looking to upgrade pretty much anything that came after the g2x likely has a lot more to offer in development. Good thing about this phone is everything is an upgrade. I have a samsung galaxy s 4g that's nearly 3 years old and single core but it runs 4.3 like a boss! Aside from GPS...

Flashlight didn't show any screen images. I think the next step is just trying to guess my way into debug mode and connect via uSB to my laptop and retrieve data before dumping the phone or trying to replace the lcd/digitizer. I saw an app mentioned in another post that should allow me to mirror my phones screen on a laptop. We'll see.
TwitchyEye said:
Yeah I'm not too sure how these phones are set up, I have more experience with lcd monitors and such. But I think it is all in one piece on phones.
If you're looking to upgrade pretty much anything that came after the g2x likely has a lot more to offer in development. Good thing about this phone is everything is an upgrade. I have a samsung galaxy s 4g that's nearly 3 years old and single core but it runs 4.3 like a boss! Aside from GPS...
Click to expand...
Click to collapse
Thanks again. Anyone else had this issue?

last chance
Last chance in case anyone has any great ideas. I'll be ordering a new LCD and digitizer (probably don't need both) but would prefer not to spend the coin if that isn't my problem. all suggestions welcome

Hmmm, this an odd and aggravating problem you have here lol. I've ran two versions of eaglesblood, their CM7 version on 2.3.4 and their ICS AOSP version on 4.0.4 and have never heard an engine revving in any boot animation so I'm not sure what rom you're running either. Have you tried the hard reboot? While the phone is on at the home screen (if you think you're there I guess) hold the power button and the volumeUP button and the phone will reboot. I've read on here from a more experienced user before that doing this clears or does something to the caches that makes for a more complete reboot or "reset" of the phone's condition. Try that and see what happens. The only other option I would try to take is to flash a new rom and before doing so doing a COMPLETE wipe (to include format /system) and full instillation of a new rom, gapps and kernel. Can you see any images if you boot into CWM when shining a light on the phone's screen?

Maybe I'm wrong about the ROM. The flash screen shows the android graphic in electric blue and a comet type animation zooms around. During the zooming, the sound is an engine revving. I was using the ROM for 2-3 months before this issue popped up so I doubt it is the cause just wanted to give those more knowledgeable than myself as much info as possible
Pain-N-Panic said:
Can you see any images if you boot into CWM when shining a light on the phone's screen?
Click to expand...
Click to collapse
That's my real problem, I can' t see anything! With the phone on, when I hit the power button and unlock the screen (guessing), the only illumination is the menu, home, back space and search buttons on the G2X body. I can tell from the haptic feedback once the phone is unlocked and I can occasionally guess the proper location to shutdown.
I tried the hard restart (Power, Up) but same result. I've downloaded an app called MobileGo for the computer that displays the phone screen but I can't get USB debugging turned on.
I have noticed another odd issue. With the phone turned on and the SIM card installed, when I call myself from a LAN line it goes straight to vmail. I know the SIM is good b/c I've been using an old nokia candy bar phone with the same SIM while troubleshooting. When re-inserting a SIM card, is there anything the user needs to do for the phone to recognize the SIM? Just wondering if this 'direct to vmail' is another sign of ............something.
Thanks

Sometimes when I take out the sim card my apn gets messed up. Ideally you'd just go into settings and load default apn and it'll work again.

But calling should work.
Seems like a busted screen from everything being described here.
Try connecting to a tv using hdmi... maybe the ROM would allow it to display. Worth a shot.
Sent from my LG-P999 using xda app-developers app

also if you could get airdroid installed on tthe phone you might be able to do something with that. Cool little app that lets you control the phone through your PC using the same wifi network.
Sent from my LG-P999 using xda premium

It's alive!!
My phone is alive, or at least it was.
I followed the directions on the youtube video I found to take the G2X apart and the first thing I noticed was the corrosion on LCD connector. I'd already purchased the LCD so instead of cleaning the old we just replaced it. The new screen worked, unfortunately I couldn't get a signal so we took it apart again to clean off corrosion on all the connectors. I'll let it sit for a few days to make sure everything is dry.
Don't be a fool like me, if you're going to do anything with your phone that might cause it to get wet, especially sweat, put it in a baggie or something. I'll post a follow-up if the thorough cleaning does any good.

I'm pulling for ya man, best of luck!

It works!!
The G2X is up and running again! :good:
Pain-N-Panic said:
I'm pulling for ya man, best of luck!
Click to expand...
Click to collapse
For anyone else that runs across this thread, unless the digitizer or LCD is physically damaged I'd disassemble the phone and check for corrosion before buying new parts. I used the new LCD but that b/c I'm not going through the trouble of returning a $16 item.
Wi-fi still doesn't seem to be working, which is odd. Wi-fi stopped working two months ago, it doesn't even show available networks, but worked for a few minutes when I originally replaced the LCD last weekend. Both antennae are connected but oh well. if I had to choose network vs wi-fi connectivity, I'll take network!
Thanks again for all the help
:good:

Related

[Q] Another G2x noob, is my phone going to be a lemon?

I'm kinda hesitant to post this, because I know you guys go through great lengths to emphasize searching first. I watched the video when I registered, nice touch. More forums could use vids like that!
oh well, here we go:
I have owned an Iphone every since they where introduced to the market. I have been wanting to make a switch for a while now. I was very close to purchasing a G2x back in April when they came out, but I held off. Well recently, a coworker let me check out his HTC G2 and I was amazed at the functionality, features, and other misc items compared to my old Iphone 3GS. I was never a fan of the slide out keyboard, so I knew the G2 was not for me.
Last week, I just missed the free promo on T-MO's web site, so Instead I purchased a G2X locally. I was totally unaware of all the problems you guys where having, as the typical review sites never mention these issues.
I have owned the phone for 8 days, So far here is whats been a going on:
7-29-11 Purchased the phone from Best Buy, decided to buy from them since they where the cheapest out the door with out rebate. I hate rebates! lol
Right before I am going to bed, I plug in to charge, and the phone shuts off, I cannot get it to power back up. I did not know about pulling the battery, I thought it had just died. I was going to wake up the next morning and take it back.
7-30-11 When I woke up, I looked around online, and found out about removing the battery and putting it back in. Now phone is working again.
I was able to get the OTA update to 2.3.3, right after the update, I did a master reset.
8-2-11 I downloaded a "radio scanner" app, and the first time I executed it, the phone froze, requiring another battery pull. Afterwards, the app ran fine.
Those are the only 2 major issues I have had.
Here are a few other things I noticed:
Screen: No separation, very slight light blur around top corners with lit black screen. Does not bother me, and I can't really notice it 99% of the time.
GPS: I know some have been having issues with this, for me, The time to get an accurate fix can sometimes take anywhere from 5-30 seconds. Even with the stock toggle always turned on, I do not always have the GPS Icon in the top bar, I don't know if I am supposed to. Can someone please confirm this?
WI FI: Seems to be working like intended, no complaints there.
BT: I have nothing to pair with the phone, so I will probably never know.
Making calls: this is kinda annoying, I will look through my call log and select a person, I see the dialer initiating so I put the phone to my ear, but a few seconds go by and nothing.... I look at the phone and find myself looking at the call log again, like the dialer crashed? Also, during the conversation the screen will turn off. I think this is normal, but when the phone detects motion shouldn't the screen turn back on?
Other than that, I love this phone so far. However, I do not want to swap handset after handset, refurb after refurb with T-MO or LG.
Is it possible that the phone will NOT continue to get worse as time goes on? Or should I take the first shut down as a sign of whats to come in the future? I have a 6 days left to take this thing back, but I am having a major conflict with myself about keeping it. What makes it even harder, Is I have already ordered a 32g micro SD, Trident case, and 3 extra data cables.
My plans are to root it, and run some sort of rom with it once I read up and half ass know what I am doing.
---------------------------------------------------------------------------------------
TLDR:
Have owned phone for a week. Shut down instantly the first time I charged it requiring a battery pull. Froze/crashed due to an app maybe Second battery pull.
Question a few functions but otherwise works like a champ.
Purchased case, micro sd, extra data cables.
thinking of taking it back and cancelling contract to avoid future headaches, but not sure if I should or want to at this point. need avdice please!
Doesn't sound like a lemon. The stock software is buggy. If you're gonna root it and flash another rom then you're gonna love this phone.
The GPS indicator is normal. It only shows when an app is using GPS for your location. Otherwise it doesn't show.
G2X CM7
It doesn't sound like a lemon to me either. I bought mine in April and my phone had a few reboots while charging overnight and two freezes in the first month. It has been OK since then, although I did not do anything about it (and I'm still on Froyo). The only thing I do is that I reboot my phone manually once in 7-10 days because the phone starts to lag. I believe this is normal for all smartphones including iPhone...or am I wrong?
Oh, forgot to mention when I hit the power button to wake the phone and go to the lock screen, I briefly see the last screen I was in before the phone went into sleep mode. Total lack of QA in my opinion... Will a rom fix this?
And yes Man of La Mancha, the iphone would get somewhat glitchy, but a reboot always took care of it. I didn't really have to reboot it too often, maybe once every 2 weeks or so.
HTXg2x said:
Oh, forgot to mention when I hit the power button to wake the phone and go to the lock screen, I briefly see the last screen I was in before the phone went into sleep mode. Total lack of QA in my opinion... Will a rom fix this?
And yes Man of La Mancha, the iphone would get somewhat glitchy, but a reboot always took care of it. I didn't really have to reboot it too often, maybe once every 2 weeks or so.
Click to expand...
Click to collapse
The lockscreen issue is a known bug. CM7, or any ROM with 2.3.4+ doesn't have that problem.

[resolved]I think my digitizer is broke. maybe its the rom

I dont know it it is a software issue to what. Last night I put my phone in my pocket. I pulled it out and the screen was a frozen white noise image. I dont know it my phone is locked up cause I used the revolution rom or the screen went bad. Any ideas?
I will try to add a phone. I currently am using my old pantech c300 due to lack of back up phones.
croakthedj said:
I dont know it it is a software issue to what. Last night I put my phone in my pocket. I pulled it out and the screen was a frozen white noise image. I dont know it my phone is locked up cause I used the revolution rom or the screen went bad. Any ideas?
I will try to add a phone. I currently am using my old pantech c300 due to lack of back up phones.
Click to expand...
Click to collapse
Before I offer any advice, what have you done so far to try and remedy this (i.e. battery pull, reformat phone, bang it on a desk...)? I just need to know what you've done before I try and offer you the same solution...
WHat I have tried
I have currently tried battery pull. Restore via power/volume down. I just tried to restart again for giggle. my bt headset did say phone 2 connected.
currently this is what the screen looks like,.
You can just text me with advice if it would be easier. thanks again.
Where you overclockign at all? GPU,CPU or OV~UV gpu failure could do that
No overclocking I know of. Heck I'd stock if I could get it back
Sent from my android thingy using XDA App
I'm not sure exactly how this applies to HTC phones, but for Samsung phones, the 3-button boot into recovery usually clears these kinds of issues right up!
Once you get into recovery, we clear data, cache and dalvik cache, potentially restoring your phone back to stock condition. Yes, you lose all your stuff, but whatever was causing the malfunction is usually gone at that point. There's a possibility it could just be how your ROM was interacting with your lovely manufactured equipment (YMMV - Your Mileage May Vary, meaning not all phones are built the same so what works for some may not work for others due to the small differences in every manufactured part...)
Now as far as your screen goes, did you drop it or anything like that? Do you think this was physically damaged while in your pocket at all? Does it get pretty hot when in your pockets or was it hot this time when you pulled it out?
Not hot. It wont go into boot loader
Using das XDA App
croakthedj said:
Not hot. It wont go into boot loader
Using das XDA App
Click to expand...
Click to collapse
I followed this. Several time. I changed batteries. changed sd card. and left the battery out for 30. Still not working.
1. Remove the battery, wait for a few seconds, then reinsert the battery.
2. Press and hold the VOLUME DOWN button, and then briefly press the POWER button.
3. Wait for the screen with the three Android images to appear, and then release the VOLUME DOWN button.
4. Press VOLUME DOWN to select FACTORY RESET, and then press the POWER button."
So the phone works.just had the alarm go off. If that's any help.
Sent from my T-Mobile G2 using XDA App
So the phone works but the screen still doesn't?
Sent from my SPH-D700 using xda premium
Its like mid render.. stuck
Sent from my T-Mobile G2 using XDA App
Sounds like your gpu bro. Time for a new phone...
Sent from my SPH-D700 using xda premium
It was found out to be the screen. I had a friend mess with it and he said it just came back on. he made it stock again and it goes out Monday for warranty. I gotta pay for shipping but its alot cheaper than a new phone.
Interesting. Who manufactured the screen? There seem to be a lot of issues with the Sensations display, it would be cool if we could isolate it to one of the two manufacturers.
Might want to change your title to reflect "[SOLVED]" somewhere in it, also.
Sorry I couldn't help more, but hardware isn't my thing
croakthedj said:
It was found out to be the screen. I had a friend mess with it and he said it just came back on. he made it stock again and it goes out Monday for warranty. I gotta pay for shipping but its alot cheaper than a new phone.
Click to expand...
Click to collapse
When you say he messed with it, what exactly did he do?
I quoted wdhat he said. sorry for the vague wording. I believe he took the back off and suspended it upside down from teh back for an hour then restarted it 15 times and it came back on. after that he went put it all back together. From what he said if you press on certain parts of the screen it goes out. but then others if comes back. Similar to a teeter totter. as he put it. I am guessing a ribbon has come loose or something

[Q] screen disaster - random tinting, solarization, turns upside down

sooo, yeah. my wife has the t959v. the screen cracked months ago, replaced it with one from ebay, works fine. a few weeks ago, it was involved in an accident and needed yet another screen replacement; ergo, back to ebay i go. installed the new screen yesterday, turn it on, all is well. for a bit.
now, the phone isn't currently, nor has it ever been rooted; pure stock tmo us 2.3.6. during boot, the splash screens and boot animation are gorgeous and perfect in appearance. the recovery menu is exactly as expected. android boots as you'd want it to, and then the display will do one of the following:
-work properly (rare)
-automatically turn off, capacitive buttons still lit, touchscreen unresponsive - turning it "off" darkens the cap buttons, turning it back on flashes the screen on for a half-second, then off, with cap buttons still lit (common)
-graphical corruption ("solarized" colors, completely wrong colors, pixel vomit in essence) (fairly common)
-screen tinting, blue most often, followed by pale yellow, then greenish, then red (almost constant)
-screen inversion - the display will show as rotated 180 degrees; grabbing a framecap in ddms shows it right way up. touches are also inverse; you have to touch where the onscreen element would be if it were displayed properly instead of where the element is; e.g. a button on lower-left will display in the upper right, upsidedown, but the screen registers the button when you touch the lower-left portion of the screen. (quasi common, equally infuriating and hilarious)
none of these problems will show up in a screenshot at all.
i can reliably reproduce any of the above by simply adjusting the screen brightness. this will, quite literally, cycle through every possible defective display mode randomly for a split-second before moving on to a different one as long as you move the brightness slider.
MOST of these issues are transient and are either fixed (temporarily) or replaced with a different listed issue if you lock/unlock the display. it feels like a hardware issue what with the solarizing and color horrors, but is acting like a software issue, considering that recovery and boot are perfect and have never displayed any of these issues. i tried gently flexing and stressing the case in areas that might be a weak connection point, but can't get it to bug out that way.
in no way am i suggesting that i didn't screw something royally in the reconstruction stage, but i tore down and rebuilt that phone 4 times with identical results, so i can guarantee it's not some loose ribbon connector or zif socket.
i beg of you, great minds of xda, what the balls did i muck up this time? any hope for a fix? are there different panels, drivers, something?
thanks in advance
OK, if your screenshots appear normal, then your phone appears to be working correctly!
or at least it thinks it is we can conclude that it isn't the rom, kernel, or anything that you can blame the phone for going screwy.
Try buying another screen??
The ribbon connector might be broken?
yeah, these were what i figured what my options were. it just seems odd that the boot process and recovery menus have error-free displays while only the full android os doesnt. oh well, i'll probably just have to make a stink about it on ebay or something.
thanks for reading
You might try a fresh flash before getting a new screen to see if it is indeed a hardware issue. If you want to try that follow the second link in my signature. You will not need to flash bootloaders since you are currently on KJ6.
lumin30 said:
You might try a fresh flash before getting a new screen to see if it is indeed a hardware issue. If you want to try that follow the second link in my signature. You will not need to flash bootloaders since you are currently on KJ6.
Click to expand...
Click to collapse
hell, warranty's void at this point anyway, right? may as well thanks much!
welp, all went well, screen was perfect through the whole heimdall/recovery process, but the problems still exist in the os c'est la vie. at least my wife's phone is finally rooted, i suppose. thanks anyway!
Have you tried opening it back up and reconnecting?
yup, 4 times, but i guess one more wont hurt
[edit]
it definitely seems to be related (if not related, exacerbated by) changes to screen brightness. turning off autobrightness has helped minimize the issue, but it still presents itself semi-often during screen-off/on events. obviously nothing useful in logcat.
zero01101 said:
it definitely seems to be related (if not related, exacerbated by) changes to screen brightness. turning off autobrightness has helped minimize the issue, but it still presents itself semi-often during screen-off/on events. obviously nothing useful in logcat.
Click to expand...
Click to collapse
That's interesting and could very well be a hardware problem with the screen. You wouldn't see that in recovery as the OS isn't loaded to mess with the brightness in that mode.
Does it do it on-demand if you mess with the brightness slider?
stephen_w said:
Does it do it on-demand if you mess with the brightness slider?
Click to expand...
Click to collapse
you better believe it does. rapid fire cycles through every color until it can't take it anymore and turns off. if i take/refresh a screenshot through ddms and poke blindly at the screen at that point, it'll still take input which is a curious, difficult game to say the least.
zero01101 said:
you better believe it does. rapid fire cycles through every color until it can't take it anymore and turns off. if i take/refresh a screenshot through ddms and poke blindly at the screen at that point, it'll still take input which is a curious, difficult game to say the least.
Click to expand...
Click to collapse
It's that Pink Floyd screen. You're supposed to drop acid & watch the wall when that's going on. LOL j/j
Given that you're on a fresh ROM & the problem persists, I'm leaning toward a hardware issue man. Sorry.
stephen_w said:
It's that Pink Floyd screen. You're supposed to drop acid & watch the wall when that's going on. LOL j/j
Given that you're on a fresh ROM & the problem persists, I'm leaning toward a hardware issue man. Sorry.
Click to expand...
Click to collapse
as fun as that sounds, unfortunately i bet i'll end up just getting my wife a used phone on ebay or somewhere similar and using this one as a development monkey. i was assuming that it wasn't something i could fix but hoping otherwise... yeah, that worked out
I just started having this problem. It wasn't too bad at first, just the color changes, but then it started not showing a screen at all. Changed to three different roms, even back to the stock non-rooted KJ6 and gave up. Keeping it on a steady brightness is the only way to minimize the color changing. I thought your thread had a solution but...
I may try opening it up and fixing the ribbon. But otherwise I'll keep using it as long as I can tolerate it until an S3 or a new Nexus.
kristoper said:
I just started having this problem. It wasn't too bad at first, just the color changes, but then it started not showing a screen at all. Changed to three different roms, even back to the stock non-rooted KJ6 and gave up. Keeping it on a steady brightness is the only way to minimize the color changing. I thought your thread had a solution but...
I may try opening it up and fixing the ribbon. But otherwise I'll keep using it as long as I can tolerate it until an S3 or a new Nexus.
Click to expand...
Click to collapse
nawp, nothing even close to a solution here i did end up buying my wife a whole new replacement phone and turned the broken one into my api10 development device. for what it's worth, yeah, autobrightness off does help a bit for when the phone is actively displaying content, but after you put it to sleep/screen off and try to turn it back on, it's a crapshoot. for a few horrifying hours, the screen was upsidedown even in recovery/boot animation and would NOT flip back to right-side-up until i ran the battery completely flat.
is no fun, 'tis truth. sorry for your troubles.

[Q] Need help with blank screen after replacement

Hi all. I'm having an issue with a 727R. I replaced a broken screen and now can't get the screen to stay on. Its a non rooted, factory 2.3.5 phone. When I turn it on, the sghi-727r screen pops up for several seconds and then dissappears, phone vibrates once, notification sounds appear shortly and all touch functions appear to work (by sound and haptic feedback). For all intents and purposes, this phone is on and working perfectly...if you're blind lol. I know the replacement screen works because it works perfectly if I go into download (odin) mode. I've been searching threads and haven't been able to come up with a solution, as most of the other blank screens are from bad flashes. Keep in mind that I am also testing this with the casing removed as it is a repair for a friend (if that makes any difference). Any help or ideas would be greatly appreciated and thanks in advance.
Is the brightness maybe turned ALL the way down? When it finishes booting shine a flashlite on the screen and tell me if u can see text, icons etc...
I'll do that as soon as I get home this afternoon. I could only hope that's all it is, but i'm a little skeptical that I could be so lucky. forgot to mention that I have also odin flashed the stock rom back on just in case of software corruption. I would also think that I would get full boot logo's during the boot sequence, but hey!....its definately worth a shot! I've seen stranger things . Thanks for the quick response.
norm182 said:
I'll do that as soon as I get home this afternoon. I could only hope that's all it is, but i'm a little skeptical that I could be so lucky. forgot to mention that I have also odin flashed the stock rom back on just in case of software corruption. I would also think that I would get full boot logo's during the boot sequence, but hey!....its definately worth a shot! I've seen stranger things . Thanks for the quick response.
Click to expand...
Click to collapse
No worries, keep us informed. I didn't even bother to ask because I just assumed someone at your level who can change a screen would intuitively know to Odin stock... I was right :good:
It a ribbon cable issue when I swap dismantling my SR's I ran into that twice swapped out screen and no issues after
Sent from my SGH-I727 using Tapatalk 2
crashpsycho said:
It a ribbon cable issue when I swap dismantling my SR's I ran into that twice swapped out screen and no issues after
Sent from my SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
So you had display for start of boot and d/l mode? If so, then I'll go no farther until I get another replacement screen.:crying:. Come to think of it, when plugged in and off, the charge symbol shows up for a second and its discoloured (almost like its made of vertical lines that are pinks and grays). You may have just saved me a lot of time. I was leaning toward trying to adb error logs in hopes of finding something. Other than that it was going to be a reflow on the gpu since the phone did do a leap of faith from 6 ft up....and lost lol.
icenight89 said:
Is the brightness maybe turned ALL the way down? When it finishes booting shine a flashlite on the screen and tell me if u can see text, icons etc...
Click to expand...
Click to collapse
No dice icenight. Tried out of hope but its completely black. I was really hoping for maybe a fault that could be fixed with a flash.....whoa is me....looks like I may be sending screen back and getting another. I cant send it out for another day so if anyone has any other ideas, or wishes to guinea pig this unit until one comes in, feel free to chime in. And thanks for the responses so far!
crashpsycho said:
It a ribbon cable issue when I swap dismantling my SR's I ran into that twice swapped out screen and no issues after
Sent from my SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
And the winner is....Crashpsycho! After months of trying to find a replacement, i finally got my hands on two of them for a decent price. Popped one in, odin'd jb stock and voila! perfect phone again. Thanks Crash!

Nexus 5 screen died today + dangerously hot lower screen

Went to unlock my phone this morning off the charger and the screen is totally dead. Couldn't unlock or do anything to it or even see what was going on, called Google and ordered a replacement ASAP.
Went through the not fun task of doing a nandroid backup without seeing what was on the screen and doing some trickery with screenshots then backing up my entire SD card.
However, here's the strange and potentially dangerous thing that I noticed later when I got home this evening. I went to look at the phone and go to a fastboot flash with the factory images and went to touch the bottom of the screen. When I went to do so, to the little bit of the left of the LED light was a SUPER hot portion of the phone. I almost burnt my finger it was so hot.
Not sure what to do about the issue, I feel like if I just call the support line they won't actually take in my concern legitimately. Any suggestions?
thats something quite strange
let us know what google says about RMA and this issue
Agree, maybe it's just your phone, maybe it's all the batch. Which batch/model do you have?
Sent from my Nexus 5 using Tapatalk
kentoe said:
Went to unlock my phone this morning off the charger and the screen is totally dead. Couldn't unlock or do anything to it or even see what was going on, called Google and ordered a replacement ASAP.
Went through the not fun task of doing a nandroid backup without seeing what was on the screen and doing some trickery with screenshots then backing up my entire SD card.
However, here's the strange and potentially dangerous thing that I noticed later when I got home this evening. I went to look at the phone and go to a fastboot flash with the factory images and went to touch the bottom of the screen. When I went to do so, to the little bit of the left of the LED light was a SUPER hot portion of the phone. I almost burnt my finger it was so hot.
Not sure what to do about the issue, I feel like if I just call the support line they won't actually take in my concern legitimately. Any suggestions?
Click to expand...
Click to collapse
On my Transformer Infinity, sometimes the screen won't turn on at all. On a few occasions, if I press Power enough times, I get a glimpse of a message saying the Launcher process has stopped, but then my touchscreen doesn't register any input. The tablet is also sometimes running quite hot at those times. The only way I know to recover from this is press the Power button long enough to force a reboot, then everything is normal. Could this be what's happening? Do you know if the phone is still running under the black screen? Have you tried forcing a reboot, and did it work?
As for the hot phone, I've noticed my N5 does get a bit warm when I'm using it intensively (4G, WiFi, Bluetooth, GPS and screen on all at the same time and in use) but not enough to burn me. Could be hard to tell which component is heating up like that since I think it could be the screen backlight, SoC or battery... Do let us know if you find out more.
meethere said:
thats something quite strange
let us know what google says about RMA and this issue
Click to expand...
Click to collapse
I had called them and reported the screen totally dead with lines streaking vertically and got a new replacement ordered. It wasn't until late last night when I got back and had the screen on in this dead mode that the bottom was extremely hot. I'll have to call them back and let them know
dark_ente said:
Agree, maybe it's just your phone, maybe it's all the batch. Which batch/model do you have?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Yeah hopefully, it definitely seems like it could be one of those things that could potentially start fire.The one I have is the LG-D820. Any more info I can provide?
daemonios said:
On my Transformer Infinity, sometimes the screen won't turn on at all. On a few occasions, if I press Power enough times, I get a glimpse of a message saying the Launcher process has stopped, but then my touchscreen doesn't register any input. The tablet is also sometimes running quite hot at those times. The only way I know to recover from this is press the Power button long enough to force a reboot, then everything is normal. Could this be what's happening? Do you know if the phone is still running under the black screen? Have you tried forcing a reboot, and did it work?
As for the hot phone, I've noticed my N5 does get a bit warm when I'm using it intensively (4G, WiFi, Bluetooth, GPS and screen on all at the same time and in use) but not enough to burn me. Could be hard to tell which component is heating up like that since I think it could be the screen backlight, SoC or battery... Do let us know if you find out more.
Click to expand...
Click to collapse
Yeah, no its definitely dead. There were streaked lines across it, rebooted it multiple times. I ended up going into the bootloader and recovery via adb/fastboot and all that jazz. It eventually just would not work now.
In regards to the hot part I definitely think it was the lower part of the screen. It was quite literally half an inch away from the LED to the left. Was super super hot then once I shut the defective screen off (I could tell by the backlit light or whatever) it wasn't hot anymore after a minute or so.
Is it black/white? 16 or 32? When did you get it?
Sent from my Nexus 5 using Tapatalk
dark_ente said:
Is it black/white? 16 or 32? When did you get it?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
32gb black version. I ordered it immediately when they announced it that day.
mine gets really warm when i'm doing a TWRP backup then it goes into bootloop after and wont cool down. i have to force it to power off from recovery and let it cool, but i've always seen it happen. i wonder if yours was attempting to boot over and over for hours and cooked itself.....? i have a launch day black 32gb too, running Cataclysm with Franco at the moment but it was doing it on rooted stock with stock kernel
I had to send my 19 day old 32Gb Red Nexus 5 in to LG for the same reason. I was using the phone and all of the sudden had vertical lines and the bottom of the screen got burn your fingers hot. Waiting to see what LG does with my phone. The only thin I can figure is the synaptics chip which controls the screen is bad. Its the only thing in that area that could get that hot. I also noticed when I first got my phone the glass in the same area looked like it had a slight wave in it. Didn't think anything of it at the time. I'll let you know how it goes.
Is RMA/replacement applicable for Rooted and unlocked devices?
I don't believe its an issue with developer phones as long as the issue wasn't caused by something you did like brick it by flashing a wrong radio or something like that. It has to be a manufacture defect to get it fixed for free.
Sent from my ME173X using XDA Free mobile app
Bear3825 said:
I don't believe its an issue with developer phones as long as the issue wasn't caused by something you did like brick it by flashing a wrong radio or something like that. It has to be a manufacture defect to get it fixed for free.
Sent from my ME173X using XDA Free mobile app
Click to expand...
Click to collapse
My device issue is related to power button. there is no software issue.
The power button is rattling since from the purchase of the device.
Hope my device gets repaired.
Like I said. Hardware issues that are production faults should be covered.
Sent from my ME173X using XDA Free mobile app

Categories

Resources