[Q] Installing Any New ROM, No Boot, Stuck in Standard ROM FOREVER - Transformer TF300T Q&A, Help & Troubleshooting

I hate myself, for I am a noob.
Actually, I have just never posted because someone else has always posted the issue and fix for my problems, but this one make me want to paint the walls with my brains.
Obviously I have an Asus TF300T, and I have successfully unlocked and installed a custom recovery. I have TWRP 2.5.0.0 because apparently ClockWorkMod does not like the Asus 4.2 bootloader.
So I have the TWRP 2.5.0.0 Custom Recovery and Asus Stock Android 4.2.1, and every time that I install a new ROM and reboot I get stuck in the "Asus" window, the window it shows right before it loads the oparating system. So it tells me that it cannot read or there is no operating system found. I am doing a wipe Dalvik Cache, System, Cache, and Data before I do the install of the new ROM, but it never gets to the new operating system.
I am wanting to get to CyanogenMod, and I have tried all versions of if with the same result. I have also tried AOKP and Baked Bean and I still get the same thing.
So I found another post earlier and they suggested there was an issue with the Asus 4.2 BootLoader, and I was excited because I was sure that was the problem all along! ... Not...
So I was able to get the .zip of the Asus Stock Android 4.1.1, and I was able to get into TWRP and install that. Magically, that worked and I am now on Asus Stock Android 4.1.1, which to my understanding should mean I have the Asus 4.1 Boodloader. Since the OS Version changed, I also had to change the version of TRWP. It is still TWRP 2.5.0.0, but for Asus 4.1. So I install a new ROM and I get the same exact issue as before...
At this point, I have no idea. I feel ashamed to have to post a question and ask, but does anyone have any ideas what else I might be able to try? Or it looks like I am stuck with the default version of Android and I should have never unlocked it.
Thank you!

Mostly Fixed
I was able to finally get to CM 10.1, but only after I installed Asus 4.1 Boot loader.
But all versions of CM 10.2 just get to the ASUS menu and it flashes and goes back to that screen every 45 seconds. Any ideas, or I suppose I should go to a CM forum at that point?

JEYoung4545 said:
I was able to finally get to CM 10.1, but only after I installed Asus 4.1 Boot loader.
But all versions of CM 10.2 just get to the ASUS menu and it flashes and goes back to that screen every 45 seconds. Any ideas, or I suppose I should go to a CM forum at that point?
Click to expand...
Click to collapse
If you itch so much to install CM 10.2 on your tab, the dedicated thread in development recommends that you run it with 4.2 bootloader. Give it a try to see if it solves your problem.

if you want to run cm10.2 just upgrade to latest stock, flash twrp2.6.0.1/ 2.6.0.0 and flash cm10.2.
cheers
Buster
Sent from my GT-I9505 using XDA Premium 4 mobile app

Related

[Q] ROM Problem : Stuck on boot logo

This is the story
I first installed Unlocked bootloader from asus, CWM recovery for tf300t, and then i used the update.zip to gain root access
I downloaded the CM nightly build, used CWM to backup, then flashed the CM ROM.
It was stuck on CM boot logo for about 30 min, so i restarted and cleared my cache.
I tried flashing again, and it was still stuck on boot.
I then restored to my backup, and now it is stuck on the original ASUS boot animation.
What do I do?
confuz said:
This is the story
I first installed Unlocked bootloader from asus, CWM recovery for tf300t, and then i used the update.zip to gain root access
I downloaded the CM nightly build, used CWM to backup, then flashed the CM ROM.
It was stuck on CM boot logo for about 30 min, so i restarted and cleared my cache.
I tried flashing again, and it was still stuck on boot.
I then restored to my backup, and now it is stuck on the original ASUS boot animation.
What do I do?
Click to expand...
Click to collapse
restore with cwm,ifyou can, to earlier version,working
then remove ClockWorkMod Recovery, by fastbooting TWRP instead...much more reliable (team win recovery)
then to root, theres a theres a batch script tool, that,when tablet is connected to pc, will run and reboot the tablet several times, rooting it.
ill look for the link, its in the forums here, debug,defug..something
there are other methods,that worked the best for me...
CM had been having issues, install CleanROM 2.1 HAS THE JB UPDATE V13 in it. its smooth
CyberdyneSystems said:
restore with cwm,ifyou can, to earlier version,working
then remove ClockWorkMod Recovery, by fastbooting TWRP instead...much more reliable (team win recovery)
then to root, theres a theres a batch script tool, that,when tablet is connected to pc, will run and reboot the tablet several times, rooting it.
ill look for the link, its in the forums here, debug,defug..something
there are other methods,that worked the best for me...
CM had been having issues, install CleanROM 2.1 HAS THE JB UPDATE V13 in it. its smooth
Click to expand...
Click to collapse
I have tried recovering with CWM, and restoring to factory settings.
Both didn't work.
confuz said:
I have tried recovering with CWM, and restoring to factory settings.
Both didn't work.
Click to expand...
Click to collapse
try this thread...otherwise...you need to RMA it to asus,or the store you bought it from
http://www.scottsroms.com/showthread.php/1637-Tf300t-sku?p=13102#post13102
I am having the same issue installing any ASOP roms on my tf300t.
I have the TWRP recovery, gained root by flashing.
I can install ASUS based roms like CleanROM fine, but I cannot flash any ASOP roms like CM10.
Just curious on what is preventing us from doing this. Especially when our devices are supposedly "unlocked" with custom recoveries and root.
If this device still continues to be this locked up, I might just have to sell mine when the GN2 comes out.
k4killer said:
I am having the same issue installing any ASOP roms on my tf300t.
I have the TWRP recovery, gained root by flashing.
I can install ASUS based roms like CleanROM fine, but I cannot flash any ASOP roms like CM10.
Just curious on what is preventing us from doing this. Especially when our devices are supposedly "unlocked" with custom recoveries and root.
If this device still continues to be this locked up, I might just have to sell mine when the GN2 comes out.
Click to expand...
Click to collapse
probably the bootloader, looks for a simple command,file....its not there,so its stuck in a loop
confuz said:
I have tried recovering with CWM, and restoring to factory settings.
Both didn't work.
Click to expand...
Click to collapse
First declare your bootloader. Have you ever been on a jb-rom, stock or otherwise?
Looking at git for cm it appears the kernel is 2.6, so I would expect that is not a jb rom.
cwm has some issues on this unit.
get into cwm and use fastboot to flash twrp for the proper bootloader you have.
or get into fastboot by use of power and volume down
at that point you can twrp a rom into place; probably not to restore your backup as twrp and cwm have issues reading each others backups.
Good Luck!
Note: If you can power up and access recovery (cwm in your case) you are not bricked and should be able to recover. I have as well as many others. Take your time and go a step at a time! Make back ups and make sure you have fastboot and adb access to your unit! If you are still ics bootloader consider nvflash once you have this mess sorted.
k4killer said:
I am having the same issue installing any ASOP roms on my tf300t.
I have the TWRP recovery, gained root by flashing.
I can install ASUS based roms like CleanROM fine, but I cannot flash any ASOP roms like CM10.
Just curious on what is preventing us from doing this. Especially when our devices are supposedly "unlocked" with custom recoveries and root.
If this device still continues to be this locked up, I might just have to sell mine when the GN2 comes out.
Click to expand...
Click to collapse
This is a known problem... once u get the OTA asus jb update, u can no longer flash any aokp or cyanogen jb roms. This is due to the kernel in these roms which are based on ics but since uve installed new ota jb bootloader it will not work and get stuck on boot screen. Restore in recovery will not work either. U need to download latest asus firmware and flash it then fastboot a recovery (i recommend twrp) and reroot.
Dfanzz said:
This is a known problem... once u get the OTA asus jb update, u can no longer flash any aokp or cyanogen jb roms. This is due to the kernel in these roms which are based on ics but since uve installed new ota jb bootloader it will not work and get stuck on boot screen. Restore in recovery will not work either. U need to download latest asus firmware and flash it then fastboot a recovery (i recommend twrp) and reroot.
Click to expand...
Click to collapse
Ah, ok. I have the JB OTA update so i have the latest bootloader :/
I restored my nandroid of stock and it worked fine.
Just flashed CleanROM which is running great. Cant wait till the CM team gets the JB bootloader worked out as i have always loved being ASOP. Any info on when it might happen?
k4killer said:
Ah, ok. I have the JB OTA update so i have the latest bootloader :/
I restored my nandroid of stock and it worked fine.
Just flashed CleanROM which is running great. Cant wait till the CM team gets the JB bootloader worked out as i have always loved being ASOP. Any info on when it might happen?
Click to expand...
Click to collapse
Great that ur nandroid worked! I know they r working on it... dont really have a time frame... just be on the lookout

Can't load recovery

Hello everyone,
My problem is this: I wanted to install a CM10 nightly on the device, so I root using the DebugfsRoot method, install rom manager, flash a recovery, try to install a ROM and it did not work. Rebooting into recovery got me the red triangle, but using the volume buttons allowed me to get in (only it did not have the option to install updates or anything. I think it was just he mounting and partition options)
Since I did not unlock the device before doing this, I chose to do so using ASUS's unlock utility. Once done, I tried booting into recovery, but the device would be stuck at "booting recovery kernel image" and won't budge. I tried flashing different version of CW but it did not seem to work.
Finally, for some reason, I chose the "wipe data" option from the bootloader and the device was stuck, again, at "booting recovery kernel image", only this time I can't boot into a ROM nor can I boot back into bootloader.
What happens when I boot using power and volume down is this:-
The device is Unlocked
Android cardhu-user bootloader <2.10 e> released by "US_epad-9.4.5.26-20120720" A03
Checking for android ota recovery
Booting recovery kernel image
and then everything's stuck.
Booting normally makes the device stop at "the device is unlocked" message because, I assume, there is no ROM flashed into the device.
Thanks for helping in advance.
It's not just that I can't get the unit to go into recovery, It's that I can't even get to fastboot (it tries to go into recovery every time I try to get into fastboot)
ShiroiKage said:
It's not just that I can't get the unit to go into recovery, It's that I can't even get to fastboot (it tries to go into recovery every time I try to get into fastboot)
Click to expand...
Click to collapse
I believe your device is bricked. Using a wrong version of custom recovery may caused this. I haven't seen anyone able to fix the issue that you having right now, the only thing is to send out to Asus for repair.
buhohitr said:
I believe your device is bricked. Using a wrong version of custom recovery may caused this. I haven't seen anyone able to fix the issue that you having right now, the only thing is to send out to Asus for repair.
Click to expand...
Click to collapse
So, if I get it repaired/replaced, what version of CW recovery should I get? It seems that there is not, yet, a version for the Infinity tab. I really want to get a custom ROM because the stuff ASUS has slapped on their version of Android gets under my skin.
ShiroiKage said:
So, if I get it repaired/replaced, what version of CW recovery should I get? It seems that there is not, yet, a version for the Infinity tab. I really want to get a custom ROM because the stuff ASUS has slapped on their version of Android gets under my skin.
Click to expand...
Click to collapse
The Team Win TWRP version 2.3.1.0 works really well. It's a touch recovery and very easy to use and full featured.
okantomi said:
The Team Win TWRP version 2.3.1.0 works really well. It's a touch recovery and very easy to use and full featured.
Click to expand...
Click to collapse
One very last question:-
Would it work if I get the CM10 nightly for the TF300T installed on a TF700T (since it's practically the same device with a different screen)? If not, is there a ROM that's pure JB without ASUS's stuff installed one it?
Your replies are very much appreciated.
ShiroiKage said:
One very last question:-
Would it work if I get the CM10 nightly for the TF300T installed on a TF700T (since it's practically the same device with a different screen)? If not, is there a ROM that's pure JB without ASUS's stuff installed one it?
Your replies are very much appreciated.
Click to expand...
Click to collapse
I would NOT recommend you do so with tf300 on tf700. There is no pure stock debloated version for JB, however, if you want to stay as close as stock and stable I would recommend "Cleanrom for JB". This rom doesn't have Asus bloatware and a few performance tweaks make it very good.
buhohitr said:
I would NOT recommend you do so with tf300 on tf700. There is no pure stock debloated version for JB, however, if you want to stay as close as stock and stable I would recommend "Cleanrom for JB". This rom doesn't have Asus bloatware and a few performance tweaks make it very good.
Click to expand...
Click to collapse
So I got it replaced (Best Buy swapped it for a new one) and everything's fine. I even installed Clean ROM and it's good. Problem is that the left speaker is not working and I need to flash the stock ROM to make sure it's nothing caused by software, before I go back and re-return the unit. However, ASUS's firmware is not longer wanting to flash. It gives me the "failed" message in TWR's recovery (no backup because my internal memory was wiped when installing ASUS's JB update :/)
EDIT: Never mind. I thought the holes at the bottom, on either side of the USP port, were the speakers. Turns out I was not thinking straight. Still, I'd like to know if anyone has an idea as to why the ASUS firmware is not wanting to install.
ShiroiKage said:
So I got it replaced (Best Buy swapped it for a new one) and everything's fine. I even installed Clean ROM and it's good. Problem is that the left speaker is not working and I need to flash the stock ROM to make sure it's nothing caused by software, before I go back and re-return the unit. However, ASUS's firmware is not longer wanting to flash. It gives me the "failed" message in TWR's recovery (no backup because my internal memory was wiped when installing ASUS's JB update :/)
EDIT: Never mind. I thought the holes at the bottom, on either side of the USP port, were the speakers. Turns out I was not thinking straight. Still, I'd like to know if anyone has an idea as to why the ASUS firmware is not wanting to install.
Click to expand...
Click to collapse
You can't install the ASUS firmware through custom recovery. It has to be stock. I believe there are signature checks that prevent it from installing otherwise.
Sent from my ASUS Transformer Pad TF700T
did you unzip the file? should be a zip within a zip. you flash the zip inside
lafester said:
did you unzip the file? should be a zip within a zip. you flash the zip inside
Click to expand...
Click to collapse
You know, I unzipped the file the first time I installed it to get Clean ROM to flash, I had the unzipped folder there yet I managed to forget to use the unzipped file. /InfiniteFacePalm

[Q] REQ Complete Guide to installing CM10.1 Nightlies on TF300T

Hi All,
I am looking for a complete guide (or links to various parts) to install the new CM10.1 nightlies that started on 5/19/2013.
I've been looking through XDA and I see a lot of information that's dated for the 4.2.1 and earlier, but nothing that confirms these steps work for these new nightlies.
1. Unlock BL using ASUS v8? (I am on 4.2.1)
2. Root it (how, what procedure should I follow and which files)?
3. Which BL should I install? I've been using CWM on my GS3, but a lot of these guides use TWRP. which versions
4. This guide looks dated, please confirm
http://forum.xda-developers.com/showthread.php?t=2055430
5. Any recommendations for a better ROM? Or is the CM10.1 the best for this tablet?
6. Since I have the WIFI version of this, I am assuming I dont need to worries about the baseband updates that were recently required for the CM10.1 updates? If I am wrong, please advise.
Thanks for you help in advance!
snoopspecial said:
Hi All,
I am looking for a complete guide (on links to various parts) to install the new CM10.1 nightlies that started on 5/19/2013.
I've been looking through XDA and I see a lot of information thats dated for the 4.2.1 and earlier, but nothing that confirms these steps work for these new nightlies.
1. Unlock BL using ASUS v8? (I am on 4.2.1)
2. Root it (how, what procedure should I follow and which files)?
3. Which BL should I install? I've been using CWM on my GS3, but a lot of these guides use TWRP. which versions
4. This guide looks dated, please confirm
http://forum.xda-developers.com/showthread.php?t=2055430
5. Any recommendations for a better ROM? Or is the CM10.1 the best for this tablet?
6. Since I have the WIFI version of this, I am assuming I dont need to worries about the baseband updates that were recently required for the CM10.1 updates? If I am wrong, please advise.
Thanks for you help in advance!
Click to expand...
Click to collapse
Most of your questions have already been answered multiple times. Ill do my best to summarize the answers ......
1) V8 unlocks most although there are some who arent able to unlock after having things come back from Asus from repair.
2) Unless you are stuck on a locked bootloader, skip rooting if you are planning on installing a custom rom..... why waste your time rooting something you wont be using? If you fall into this category, your option are limited but there is a way to root without TWRP or CWM.
3) Personally I have found that the 4.1 bootloader version 10.4.2.20 seems to play nicest with my tf300t. This of course means im stuck using Roms made specifically for 4.1 bootloaders. Im using twrp 2.4.4.0. Instructions on downgrading firmware are all over, but im pretty sure you must have an unlocked bootloader for this as well. Its a simple fastboot command to push the older system blob file to the device. Relatively easy.
4) Cant comment as I dont use CM
5) Im using CleanRom Inheritance and found that it not only benches higher, but runs much much faster than anything else I have tried on my tablet. I started with the latest 4.2.1 ROM and Bootloader. After trying everything out and everything lagging on my tablet, I decided to downgrade firmware. ROMS are nothing but personal preference, but, I find personally that Cromi ( for 4.1 ) along with Unter's kernel,makes my device smooth as butter. YMMV
6) Again, I cant comment as I dont use CM. Maybe someone else can chime in on this ? There are PLENTY of rom options available. Just try things out and see what you like best. Just remember to read the roms OP very carefully to make sure you have the proper bootloader installed for it. You can brick your device if you mismatch the rom and bootloaders.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
pyraxiate said:
Most of your questions have already been answered multiple times. Ill do my best to summarize the answers ......
1) V8 unlocks most although there are some who arent able to unlock after having things come back from Asus from repair.
2) Unless you are stuck on a locked bootloader, skip rooting if you are planning on installing a custom rom..... why waste your time rooting something you wont be using? If you fall into this category, your option are limited but there is a way to root without TWRP or CWM.
3) Personally I have found that the 4.1 bootloader version 10.4.2.20 seems to play nicest with my tf300t. This of course means im stuck using Roms made specifically for 4.1 bootloaders. Im using twrp 2.4.4.0. Instructions on downgrading firmware are all over, but im pretty sure you must have an unlocked bootloader for this as well. Its a simple fastboot command to push the older system blob file to the device. Relatively easy.
4) Cant comment as I dont use CM
5) Im using CleanRom Inheritance and found that it not only benches higher, but runs much much faster than anything else I have tried on my tablet. I started with the latest 4.2.1 ROM and Bootloader. After trying everything out and everything lagging on my tablet, I decided to downgrade firmware. ROMS are nothing but personal preference, but, I find personally that Cromi ( for 4.1 ) along with Unter's kernel,makes my device smooth as butter. YMMV
6) Again, I cant comment as I dont use CM. Maybe someone else can chime in on this ? There are PLENTY of rom options available. Just try things out and see what you like best. Just remember to read the roms OP very carefully to make sure you have the proper bootloader installed for it. You can brick your device if you mismatch the rom and bootloaders.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
First of all, thanks for the quick reply and detail!
1. I have a new one - so hopefully I should be ok. But I'll use v8
2. Great point, duh! The ROMs are already rooted!
3. I'd like to stick with the 4.2.2 bootloaders since my other devices are all running the same stuff. I haven't used TWRP before - any preference to that versus CWM?
4. no worries
5. I'll definitely keep in mind along with your bootloader suggestion should I downgrade. I've felt the lag with the ASUS Stock 4.2.1 ROM and all it's bloatware - I'm expect an immediate change right there with a clean rom.
6. yeah that is the primary reason I am asking about which bootloader to use with CM10.1's new nightlies.
snoopspecial said:
First of all, thanks for the quick reply and detail!
1. I have a new one - so hopefully I should be ok. But I'll use v8
2. Great point, duh! The ROMs are already rooted!
3. I'd like to stick with the 4.2.2 bootloaders since my other devices are all running the same stuff. I haven't used TWRP before - any preference to that versus CWM?
4. no worries
5. I'll definitely keep in mind along with your bootloader suggestion should I downgrade. I've felt the lag with the ASUS Stock 4.2.1 ROM and all it's bloatware - I'm expect an immediate change right there with a clean rom.
6. yeah that is the primary reason I am asking about which bootloader to use with CM10.1's new nightlies.
Click to expand...
Click to collapse
To be honest, the lag is still there accross all the 4.2 roms I tried, even debloated. Its not as bad but its still there. My alternate device has a beastly exynos in it so im used to a perfect smooth experience. I notice even a little bit of jitter and it drives me crazy ( hence why I downgraded to 4.1 ) .
As far as what bootloader to use for which CM rom, each will tell you which to use specifically. I saw there is a cm10.1 for 4.2 and for 4.1. Just make sure to match things.
I used to be a CWM user all the way, but twrp does trump it in features and usability, especially for the transformer series. I beleive there is only one single twrp that works properly on the new bootloader for stock based roms ( no cwm will work on it at all). It ends in .42 so make sure you flash the correct one. If not, your partitions wont be writable.
One MAJOR warning.........
Do NOT use the wipe / factory reset on ANY bootloader. You will brick your tablet!!! Permanently!!!!
You can ONLY use the wipes inside of twrp / CWM.
Sent from my SGH-T889 using xda app-developers app
dude, you are so awesome!
definitely smart to have installed TWRP - CWM through ROM Manager tried to suggest installing a TF201 recovery. From the web site it's vague but suggest a TF101 image as well.
I followed your suggestion and downloaded the 42 TWRP recovery from after having done all the SDK Tools installation and testing connectivity with FASTBOOT (from the installed SDK package, not random ones from the internet).
http://www.teamw.in/project/twrp2/97
I'm up in TWRP and running a backup of the ASUS original installation, will copy to External SD card.
previously i've formatted the internal card and then installed the ROM and GAPPS. Should I not do this?
thanks again! I'm keeping notes and will update when done.
pyraxiate said:
Most of your questions have already been answered multiple times. Ill do my best to summarize the answers ......
1) V8 unlocks most although there are some who arent able to unlock after having things come back from Asus from repair.
2) Unless you are stuck on a locked bootloader, skip rooting if you are planning on installing a custom rom..... why waste your time rooting something you wont be using? If you fall into this category, your option are limited but there is a way to root without TWRP or CWM.
3) Personally I have found that the 4.1 bootloader version 10.4.2.20 seems to play nicest with my tf300t. This of course means im stuck using Roms made specifically for 4.1 bootloaders. Im using twrp 2.4.4.0. Instructions on downgrading firmware are all over, but im pretty sure you must have an unlocked bootloader for this as well. Its a simple fastboot command to push the older system blob file to the device. Relatively easy.
4) Cant comment as I dont use CM
5) Im using CleanRom Inheritance and found that it not only benches higher, but runs much much faster than anything else I have tried on my tablet. I started with the latest 4.2.1 ROM and Bootloader. After trying everything out and everything lagging on my tablet, I decided to downgrade firmware. ROMS are nothing but personal preference, but, I find personally that Cromi ( for 4.1 ) along with Unter's kernel,makes my device smooth as butter. YMMV
6) Again, I cant comment as I dont use CM. Maybe someone else can chime in on this ? There are PLENTY of rom options available. Just try things out and see what you like best. Just remember to read the roms OP very carefully to make sure you have the proper bootloader installed for it. You can brick your device if you mismatch the rom and bootloaders.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
snoopspecial said:
dude, you are so awesome!
definitely smart to have installed TWRP - CWM through ROM Manager tried to suggest installing a TF201 recovery. From the web site it's vague but suggest a TF101 image as well.
I followed your suggestion and downloaded the 42 TWRP recovery from after having done all the SDK Tools installation and testing connectivity with FASTBOOT (from the installed SDK package, not random ones from the internet).
http://www.teamw.in/project/twrp2/97
I'm up in TWRP and running a backup of the ASUS original installation, will copy to External SD card.
previously i've formatted the internal card and then installed the ROM and GAPPS. Should I not do this?
thanks again! I'm keeping notes and will update when done.
Click to expand...
Click to collapse
okay - lots of options in TWRP - going the simple safe route and just following the norm:
http://teamw.in/whattowipe
snoopspecial said:
dude, you are so awesome!
definitely smart to have installed TWRP - CWM through ROM Manager tried to suggest installing a TF201 recovery. From the web site it's vague but suggest a TF101 image as well.
I followed your suggestion and downloaded the 42 TWRP recovery from after having done all the SDK Tools installation and testing connectivity with FASTBOOT (from the installed SDK package, not random ones from the internet).
http://www.teamw.in/project/twrp2/97
I'm up in TWRP and running a backup of the ASUS original installation, will copy to External SD card.
previously i've formatted the internal card and then installed the ROM and GAPPS. Should I not do this?
thanks again! I'm keeping notes and will update when done.
Click to expand...
Click to collapse
Im assuming you are flashing CM10 then? The only important thing is fully read the OP and match your bootloader to whatever one they tell you. Its generally not a suggestion, but an actual requirement.
Mines a 32gb so I keep all of my backups and rom flashes right on the internal storage. I feel its safer in case of SD corruption or an accidental wipe. It doesnt hurt to have it in 2 places though ( backup your original rom to SD card but keep everything on the internal as well ). I always flash from internal ( roms and nandroids alike ). Ive never had an issue.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
so this is what i've done so far and am stuck now it seems. probably a mismatch between the CM ROM and the BOOTLOADER.
1. Installed TWRP 2.5.0.0 - version ending with 42.
2. From the Wipe -> Advanced in TWRP, I selected SYSTEM, CACHE, DALVIK CACHE, and DATA (skipped the last two options).
3. I have the ROMs/GAPPS on my external SD card (and backup now too)
4. I installed today's nightly CM 10.1 for TF300T and the 20130301-signed (per 4.2.2 CM builds).
5. Reboot (via TWRP, Power Off)
I hit the power button to turn on and it gets stuck at the ASUS screen. Cannot boot into ROM either via the Android icon in the Bootloader menu.
snoopspecial said:
so this is what i've done so far and am stuck now it seems. probably a mismatch between the CM ROM and the BOOTLOADER.
1. Installed TWRP 2.5.0.0 - version ending with 42.
2. From the Wipe -> Advanced in TWRP, I selected SYSTEM, CACHE, DALVIK CACHE, and DATA (skipped the last two options).
3. I have the ROMs/GAPPS on my external SD card (and backup now too)
4. I installed today's nightly CM 10.1 for TF300T and the 20130301-signed (per 4.2.2 CM builds).
5. Reboot (via TWRP, Power Off)
I hit the power button to turn on and it gets stuck at the ASUS screen. Cannot boot into ROM either via the Android icon in the Bootloader menu.
Click to expand...
Click to collapse
going to give Cromi 4.2.1 a try too while I am in this bootloader:
http://forum.xda-developers.com/showthread.php?t=2204166
I have the matching ASUS bootloader and TWRP combination this the ROM needs.
As for the CM10.1 - looks like for TF300T they are still using the older JB requirements... but still researching.
snoopspecial said:
going to give Cromi 4.2.1 a try too while I am in this bootloader:
http://forum.xda-developers.com/showthread.php?t=2204166
I have the matching ASUS bootloader and TWRP combination this the ROM needs.
As for the CM10.1 - looks like for TF300T they are still using the older JB requirements... but still researching.
Click to expand...
Click to collapse
interesting - this ROM is packed with configuration options - you can really tailor your install.. very interesting - should work since it is a stock-based rom. we'll see. installing now.
snoopspecial said:
interesting - this ROM is packed with configuration options - you can really tailor your install.. very interesting - should work since it is a stock-based rom. we'll see. installing now.
Click to expand...
Click to collapse
yeah so that worked fine. the CM10.1 version must require some different combination.
taking your suggestions now and downgrading to the 4.1 bootloader. will also install the CleanInheritance rom.
by the way, thanks again for your help and suggestions!
So just for other people out there... if you want to run the TF300T downloads from get.cm (the nightlies as of now).
I've confirmed the following requirements:
1. 10.4.2.20 - TWRP 2.5.0.0 - JB
2. CM 10.1 5/25/2013 Nighty (This is a 4.2.2 ROM - requiring the JB, not 4.2 bootloader - i imagine at some point this will be updated)
3. GAPPS 20130301-signed
ah so nice!

[Q] Help understanding my current rom/recovery situation

Hi,
Sorry for the noob question here, I've managed to get myself very confused as to the state of my tf700t.
Some time ago I unlocked my bootloader and rooted my device (stock ROM with su I believe) and installed TWRP. All was well, but of course I couldn't get Android 4.2 OTA, so given I don't really use root much I decided to try to get back as close to stock as possible. I downloaded the 10.4.4.20 firmware from Asus and flashed it in using TWRP, so far so good.
Still no option to OTA, so I figured I would download and flash 10.6.1.14 instead and do the same thing, but I have problems! If I boot into recovery, instead of TWRP I get the android logo with the open door and spinning blue icosahedron. Poor old android then keels over backwards with an open chest and an alert sign. The tablet then reboots normally.
Question 1: Have I overwritten my recovery when I flashed the stock ROM? - I'm not sure if the ROMs should even overwrite the recovery partition; if this shouldn't happen, are there any clues as to what I have done?
The system actually recognises that I have 10.6.1.14 on my SD card and offers to install it, but that reboots and gives me the same dead android lying on his back. Question 2: Could this be related to the (broken?) recovery image, or could it just be a duff download of the firmware?
I suppose the bug question is how should i proceed? Should I look for a way to re-root the device, reinstall TWRP (maybe using goomanager) and flash again or am I just hopelessly misunderstanding where I am? Many thanks for any steers you chaps can offer.
Anatosuchus said:
Hi,
Sorry for the noob question here, I've managed to get myself very confused as to the state of my tf700t.
Some time ago I unlocked my bootloader and rooted my device (stock ROM with su I believe) and installed TWRP. All was well, but of course I couldn't get Android 4.2 OTA, so given I don't really use root much I decided to try to get back as close to stock as possible. I downloaded the 10.4.4.20 firmware from Asus and flashed it in using TWRP, so far so good.
Still no option to OTA, so I figured I would download and flash 10.6.1.14 instead and do the same thing, but I have problems! If I boot into recovery, instead of TWRP I get the android logo with the open door and spinning blue icosahedron. Poor old android then keels over backwards with an open chest and an alert sign. The tablet then reboots normally.
Question 1: Have I overwritten my recovery when I flashed the stock ROM? - I'm not sure if the ROMs should even overwrite the recovery partition; if this shouldn't happen, are there any clues as to what I have done?
The system actually recognises that I have 10.6.1.14 on my SD card and offers to install it, but that reboots and gives me the same dead android lying on his back. Question 2: Could this be related to the (broken?) recovery image, or could it just be a duff download of the firmware?
I suppose the bug question is how should i proceed? Should I look for a way to re-root the device, reinstall TWRP (maybe using goomanager) and flash again or am I just hopelessly misunderstanding where I am? Many thanks for any steers you chaps can offer.
Click to expand...
Click to collapse
The stock Asus firmware includes bootloader, kernel, recovery and apps. You have flashed the stock recovery. Head over to the twrp thread or my ROM thread in my sig to see how to get twrp 2.5 onto your tab.
Anatosuchus said:
Hi,
Sorry for the noob question here, I've managed to get myself very confused as to the state of my tf700t.
Some time ago I unlocked my bootloader and rooted my device (stock ROM with su I believe) and installed TWRP. All was well, but of course I couldn't get Android 4.2 OTA, so given I don't really use root much I decided to try to get back as close to stock as possible. I downloaded the 10.4.4.20 firmware from Asus and flashed it in using TWRP, so far so good.
Still no option to OTA, so I figured I would download and flash 10.6.1.14 instead and do the same thing, but I have problems! If I boot into recovery, instead of TWRP I get the android logo with the open door and spinning blue icosahedron. Poor old android then keels over backwards with an open chest and an alert sign. The tablet then reboots normally.
Question 1: Have I overwritten my recovery when I flashed the stock ROM? - I'm not sure if the ROMs should even overwrite the recovery partition; if this shouldn't happen, are there any clues as to what I have done?
The system actually recognises that I have 10.6.1.14 on my SD card and offers to install it, but that reboots and gives me the same dead android lying on his back. Question 2: Could this be related to the (broken?) recovery image, or could it just be a duff download of the firmware?
I suppose the bug question is how should i proceed? Should I look for a way to re-root the device, reinstall TWRP (maybe using goomanager) and flash again or am I just hopelessly misunderstanding where I am? Many thanks for any steers you chaps can offer.
Click to expand...
Click to collapse
Yes, you did. Everytime you install stock file of any version, it will update your bootloader, rom, and kernel. Just use Motochopper to root your device and reinstall your custom recovery with goomanager.
No, it is stock recovery. Just reroot with motochopper and install custom recovery with goomanager. Have fun. :good:
Right, thanks! If I want to stay completely stock I just need to figure out why the newer update is failing. Could be the file name now I think about it.
Otherwise I'll re-root and re-TWRP...
Anatosuchus said:
Hi,
Sorry for the noob question here, I've managed to get myself very confused as to the state of my tf700t.
Some time ago I unlocked my bootloader and rooted my device (stock ROM with su I believe) and installed TWRP. All was well, but of course I couldn't get Android 4.2 OTA, so given I don't really use root much I decided to try to get back as close to stock as possible. I downloaded the 10.4.4.20 firmware from Asus and flashed it in using TWRP, so far so good.
Still no option to OTA, so I figured I would download and flash 10.6.1.14 instead and do the same thing, but I have problems! If I boot into recovery, instead of TWRP I get the android logo with the open door and spinning blue icosahedron. Poor old android then keels over backwards with an open chest and an alert sign. The tablet then reboots normally.
Question 1: Have I overwritten my recovery when I flashed the stock ROM? - I'm not sure if the ROMs should even overwrite the recovery partition; if this shouldn't happen, are there any clues as to what I have done?
The system actually recognises that I have 10.6.1.14 on my SD card and offers to install it, but that reboots and gives me the same dead android lying on his back. Question 2: Could this be related to the (broken?) recovery image, or could it just be a duff download of the firmware?
I suppose the bug question is how should i proceed? Should I look for a way to re-root the device, reinstall TWRP (maybe using goomanager) and flash again or am I just hopelessly misunderstanding where I am? Many thanks for any steers you chaps can offer.
Click to expand...
Click to collapse
The Android on his back is your stock recovery and it does not find a valid update file.
Weird is, that your system seems to see the 10.6.1.14 file (I assume you get an automatic notification and click "install" or "update" ) and then the recovery does not seem to install it...?
You could have a bad download, so try that first if you want to get the latest stock rom, or you can try to rename the downloaded file to EP201_768_SDUPDATE.zip, put it on your microSD card and reboot into recovery. The recovery should recognize the update file and start flashing it.
But since you are unlocked anyway - why don't you give CromiX a try? It runs so much better than the stock rom!
And for that, yes you would have to root again using the Motochopper tool and then install TWRP 2.5 with Goo Manager.
If you go that route make sure you flash the latest bootloader from the OP of the CROMiX thread first, boot back into your old rom once before you flash CROMiX.
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
Alright, I'm convinced - I'll try going totally custom! Presumably CromiX handles the external keyboard and touch pad properly?
Anatosuchus said:
Alright, I'm convinced - I'll try going totally custom! Presumably CromiX handles the external keyboard and touch pad properly?
Click to expand...
Click to collapse
It's based on the stock rom, cleaned up and tweaked and optimized. Everything works - and better than on stock! I recommend selecting the option to disable fsync during installation. It boosts performance considerably, and since the rom is totally stable, the "risk" is neglible.
You will love it!
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
OK, ChromiX installed! Looks interesting already, will tinker with it over the next couple of days.

Just updated my TF300T after not using it for a while, stuck on Asus screen...

So I haven't touched my tablet in a while and figured I'd update it. It was running the official CM 10.1 ROM (4.2.2) without issues. I updated TWRP to 2.6, factory reset it and rebooted it a few times to make sure TWRP didn't **** up, since I had no idea what bootloader I was on and I took a shot in the dark deciding which TWRP file to download. I installed the "-4.2" one and it booted fine several times without issue.
Downloaded the official 08/23 CM10.2 nightly and flashed it with Gapps, now it's stuck on the Asus screen. Boots, Asus, flashes black, Asus, rinse and repeat. So, I get back into recovery, flashed it again just to be sure, same deal. So I flashed back to CM 10.1 -- and it's still doing the same thing.
Anyone have a similar experience and hopefully a solution?
hettbeans said:
So I haven't touched my tablet in a while and figured I'd update it. It was running the official CM 10.1 ROM (4.2.2) without issues. I updated TWRP to 2.6, factory reset it and rebooted it a few times to make sure TWRP didn't **** up, since I had no idea what bootloader I was on and I took a shot in the dark deciding which TWRP file to download. I installed the "-4.2" one and it booted fine several times without issue.
Downloaded the official 08/23 CM10.2 nightly and flashed it with Gapps, now it's stuck on the Asus screen. Boots, Asus, flashes black, Asus, rinse and repeat. So, I get back into recovery, flashed it again just to be sure, same deal. So I flashed back to CM 10.1 -- and it's still doing the same thing.
Anyone have a similar experience and hopefully a solution?
Click to expand...
Click to collapse
I had this issue. It was because I was on the wrong bootloader. -4.2 is for the newest bootloader, and JB is for the JB one before that.
I followed the guide at http://forum.xda-developers.com/showthread.php?t=2187982 to update to the latest stock, which updates the bootloader. After that, the new CM builds work.
L551 said:
I had this issue. It was because I was on the wrong bootloader. -4.2 is for the newest bootloader, and JB is for the JB one before that.
I followed the guide at http://forum.xda-developers.com/showthread.php?t=2187982 to update to the latest stock, which updates the bootloader. After that, the new CM builds work.
Click to expand...
Click to collapse
Thanks.
Wow. I came here to post almost the exact same story. I use my tablet every day, but I haven't updated in months. So when I finally did it was stuck in the boot loop. =( Thanks for the info, L551!

Categories

Resources