Database Info

[Q] Can't hard reset

XDA Orbit2. Can't access. Message on screen says "Several incorrect passwords have been entered.To continue password entry, enter 'a1b2c3' . In case of emergency, enter an emergeny phone number. "
As I can't access the keyboard I can't enter anything. Soft reset just returns to the same screen. Can't do a hard reset. Can connect via Active sync.
Can anyone suggest where I could go from here?

BADDREAMS said:
XDA Orbit2. Can't access. Message on screen says "Several incorrect passwords have been entered.To continue password entry, enter 'a1b2c3' . In case of emergency, enter an emergeny phone number. "
As I can't access the keyboard I can't enter anything. Soft reset just returns to the same screen. Can't do a hard reset. Can connect via Active sync.
Can anyone suggest where I could go from here?
Click to expand...
Click to collapse
First of all you should try hard reset again by:
- Press and hold the GPS/MESSAGING and INTERNET EXPLORER
buttons, and at the same time, use the stylus to press the RESET
button at the bottom of your device.
- Release the RESET button, but continue pressing the GPS/ MESSAGING and INTERNET EXPLORER buttons until you see this message on the screen " This operation will delete all your personal data, and reset all settings to manufacturer default. Press send to restore manufacturer default, or press other keys to cancel "
- Release the buttons, and then press SEND on your device to perform
the hard reset, or press any other button to cancel the reset.
if it still does not help try to reflash with official rom which you can get in http://shipped-roms.com/index.php?category=windows mobile&model=Polaris

Thanks for the reply. I've tried to hard reset many times but the screen defaults to the error message as described in the first post. As I have no experience of flashing the Rom can you point me to a step by step guide to doing this ?

BADDREAMS said:
Thanks for the reply. I've tried to hard reset many times but the screen defaults to the error message as described in the first post. As I have no experience of flashing the Rom can you point me to a step by step guide to doing this ?
Click to expand...
Click to collapse
as mentioned in your first post, that device can not connect via Active sync !! so you'd better try to flash the rom via SD card. concerning the guidelines you can look at ~ http://forum.xda-developers.com/showpost.php?p=2104049&postcount=1

Thank you for the reply. Perhaps I didn't make myself properly understood but I can establish an ActivSync connection and can see my phone on my laptop it just that the phone itself only shows the error message. Can I do anything via the PC aActiv Sync link that might restart the phone? Thanks again.

Try http://www.mymobiler.com/ you can install via active sync and use your pc keyboard to enter the password

BADDREAMS said:
Thank you for the reply. Perhaps I didn't make myself properly understood but I can establish an ActivSync connection and can see my phone on my laptop it just that the phone itself only shows the error message. Can I do anything via the PC aActiv Sync link that might restart the phone? Thanks again.
Click to expand...
Click to collapse
You can not restart the phone via ActiveSync! but you can do flash Hspl, radio, rom, backing up contacts and SMS and other

Thanks to Hakim for for the good advice.!! Phone now accessible !! Now if I can only find that Applications CD!!

Hi guys, I have a O2 XDA and since yesterday I am having EXACTLY the same errormsg "Several incorrect passwords have been entered.To continue password entry, enter 'a1b2c3 ...." Trouble is I cannot type in anything as it is not registering. I have tried soft reset, but after loading Windows Mobile software, it comes back to the same screen and then to my main 4 digit Pin entry screen. I have tried Hard Reset by pressing the green and red phone keys at the bottom of the phone and pressing the reset button at the same time but it still comes back the same screens as abopve. I have connected the phone to my laptop with Active Sync but it gives error message that my phone is locked and to unlock it and try again :-( HELP please as I am completely stuck. Thanks in advance for any help.

asmithson said:
Hi guys, I have a O2 XDA and since yesterday I am having EXACTLY the same errormsg "Several incorrect passwords have been entered.To continue password entry, enter 'a1b2c3 ...." Trouble is I cannot type in anything as it is not registering. I have tried soft reset, but after loading Windows Mobile software, it comes back to the same screen and then to my main 4 digit Pin entry screen. I have tried Hard Reset by pressing the green and red phone keys at the bottom of the phone and pressing the reset button at the same time but it still comes back the same screens as abopve. I have connected the phone to my laptop with Active Sync but it gives error message that my phone is locked and to unlock it and try again :-( HELP please as I am completely stuck. Thanks in advance for any help.
Click to expand...
Click to collapse
if your device is O2 XDA, to perform hard reset look at http://www.hardreset.eu/o2_xda_hard_reset_soft_reset_en.html
how to do a hard reset as I point on the previous post it is for O2 XDA Orbit 2 and not for O2 XDA

Hi
I have an extremely noob question, and will probably be the first in a series of them.
In all the instructions for hard reset of xda orbit 2 it says to press the send button.
There is no send button on my phone
I have
Ok
windows
phone pick up
phone hang up
and a big round one in the middle used for select in navigation
None of which seem to hard reset the phone.
When I say that, I mean everything including my settings are still present after hitting those keys.
I think I need to flash it as its being all weird but would like to try a hard reset first.
I'd appreciate any help in baby language

johnone007 said:
Hi
I have an extremely noob question, and will probably be the first in a series of them.
In all the instructions for hard reset of xda orbit 2 it says to press the send button.
There is no send button on my phone
I have
Ok
windows
phone pick up
phone hang up
and a big round one in the middle used for select in navigation
None of which seem to hard reset the phone.
When I say that, I mean everything including my settings are still present after hitting those keys.
I think I need to flash it as its being all weird but would like to try a hard reset first.
I'd appreciate any help in baby language
Click to expand...
Click to collapse
for more details of doing a hard reset on your XDA Orbit, then you should see and follow the instructions at http://www.hardreset.eu/o2_xda_orbit2_hard_reset_soft_reset.html

[Q] adb device offline - broken screen

Hello!
Today both the screen as the touch panel of my Galaxy Nexus broke. I wanted to run screencast or some other apps to control my phone via pc BUT after searching for "adb devices" I got my devices number and the word "offline".
I looked up on what I guess the issue was and what I found out was, that I have to verify my pc with this RSA-fingerprint in order to control my device, which I have not done yet on my latest rom, as I just flashed it a few days ago.
Now: can you think of any way, either bypassing the fingerprint or letting me control the device via pc to prompt the fingerprint-request?!
As mentioned, I THINK that is the problem.
Things I have tried:
different USB-port
different USB-cable
updating platform-tools
HDMI-output via MHL-adapter (no signal)
I really am hopeless and happy about all the ways, you could think of showing my phones screen on my pc. I would prefer to keep my current ROM data, as I do not want to wipe arrived messages before viewing them (WhatsApp).
some information:
device: Galaxy Nexus (GSM)
rom: latest AOKP Milestone (4.2.2)
root access of course
device definetly turned on (LED blinking)
-Jakob

Resolved!
I had a similar problem and after hours of research and trial/error, I was able to get this working. Here's how:
1. Download & install the Galaxy Nexus Toolkit and MyPhoneExplorer to your PC
2. Goto the Google Play Store on your PC and remote install MyPhoneExplorer and AF Rescue 2 apps to your phone. Wait 10 minutes or more so that this step has time to complete before continuing (longer is better)
3. Next you have to boot your phone into Recovery mode... pull the battery and usb cable out (so you can be sure your device is off). Put the battery back in, plug in the usb cable (I do this now so I can hear when the device is connected and later so you can hear that the command/reboots are working). hold down both vol up and vol down AND then hold down the power button... I do this for about 10 seconds. After releasing the buttons, your phone should be in bootloader mode, but I give it a minute just in case. now hit the vol up button 2 times then the power button. You will hear the usb connection go on and off several times and when it's done, your device will be in Recovery mode.
4. Launch the Toolkit, answer "no" to the initial question about checking for updates, then choose your device from the list
5. on the next screen (main menu) you should see your device ID listed under ADB mode list with the word "recovery" after it. If so, you have done everything correct so far. (if not, close the toolkit window, go back to step 3 and try again).
6. Next choose option 2 for Backup/Restore. Then select option 3 for "Backup your Internal Storage"
7. This is crucial. On the next screen choose option 2 "manually answer the question". Then when it asks if you are using a custom rom or recovery image, ANSWER "NO" (even if you are). This is the most important step in the whole process because it will then boot your phone into fastboot for you and install an insecure recovery image bypassing the 4.2.2 security!
8. When it tells you that the backup will take a long time and are you sure you want to continue, I recommend doing so. It will take hours (I left mine to run overnight.) Either way, when you get back to the main menu DO NOT REBOOT YOUR PHONE. YOU NEED IT IN THIS STATE.
9. Now if all has worked properly, you can launch MyPhoneExplorer on your PC and choose setup your connection via wifi. Cross your fingers, but if all worked as it did for me, your phone will appear on the screen (if it is all black, just hit the power button on your phone to wake it up). Use your mouse to enter your lock pattern or pin number if you have those set. At this point you should be using your phone through your PC. Just remember that as soon as you reboot the phone, it will revert back to it's secure state and you will have to go through this process again. I hope this helps you and others (and saves everyone the hours of frustration and research I went through).
jakbold said:
Hello!
Today both the screen as the touch panel of my Galaxy Nexus broke. I wanted to run screencast or some other apps to control my phone via pc BUT after searching for "adb devices" I got my devices number and the word "offline".
I looked up on what I guess the issue was and what I found out was, that I have to verify my pc with this RSA-fingerprint in order to control my device, which I have not done yet on my latest rom, as I just flashed it a few days ago.
Now: can you think of any way, either bypassing the fingerprint or letting me control the device via pc to prompt the fingerprint-request?!
As mentioned, I THINK that is the problem.
Things I have tried:
different USB-port
different USB-cable
updating platform-tools
HDMI-output via MHL-adapter (no signal)
I really am hopeless and happy about all the ways, you could think of showing my phones screen on my pc. I would prefer to keep my current ROM data, as I do not want to wipe arrived messages before viewing them (WhatsApp).
some information:
device: Galaxy Nexus (GSM)
rom: latest AOKP Milestone (4.2.2)
root access of course
device definetly turned on (LED blinking)
-Jakob
Click to expand...
Click to collapse

themadczar said:
I had a similar problem and after hours of research and trial/error, I was able to get this working. Here's how:...
Click to expand...
Click to collapse
Thank you very much for your time and effort, I will try this soon!

Sadly I am in the same position as the OP. My screen is cracked and I need to access the phone via adb, unfortunately, it is appearing as offline. Does anyone know a way to bypass this RSA-fingerprint issue?

[Q] [Too many pattern tries] How can I switch on wi-fi?

Like many others, I have become a victim of 'Too many pattern tries' and have got stuck at the lock screen trying to sign in without data connection or wi-fi. Is there any way to get past this without data rewipe. It's really stupid of Google to have a security mechanism that forces you to wipe your data, meaning anyone can just pick up your phone and spam the pattern till it goes to the email screen (which is what happened in my case).
I have a rooted phone with an unlocked bootloader and USB debugging enabled and I also have downloaded Eclipse Android SDK but have no idea how to use it. It would be nice if someone gave me step-wise instructions on switching on my wi-fi through the SDK so that I can connect over the internet and log in.
Of course, any other legit method is also fine, but the 'home button method' doesn't work for my phone (you know, keep pressing the home button). I have tried getting APKs that will help me bypass the lock screen but they dont work.

XtrGamer said:
Like many others, I have become a victim of 'Too many pattern tries' and have got stuck at the lock screen trying to sign in without data connection or wi-fi. Is there any way to get past this without data rewipe. It's really stupid of Google to have a security mechanism that forces you to wipe your data, meaning anyone can just pick up your phone and spam the pattern till it goes to the email screen (which is what happened in my case).
I have a rooted phone with an unlocked bootloader and USB debugging enabled and I also have downloaded Eclipse Android SDK but have no idea how to use it. It would be nice if someone gave me step-wise instructions on switching on my wi-fi through the SDK so that I can connect over the internet and log in.
Of course, any other legit method is also fine, but the 'home button method' doesn't work for my phone (you know, keep pressing the home button). I have tried getting APKs that will help me bypass the lock screen but they dont work.
Click to expand...
Click to collapse
open playstore in your pc browser login to gmail you and on the right corner see "device manager" select your device and change the code put new password which is easy to remember .. should be all done

FarrukhQadri said:
open playstore in your pc browser login to gmail you and on the right corner see "device manager" select your device and change the code put new password which is easy to remember .. should be all done
Click to expand...
Click to collapse
Android Device Manager is not able to pinpoint the location of my phone. Do I need wi-fi for this? The only options I see right now for my phone are to change the name, give it a ring or lock or erase.

I have finally found a way. No root or USB debugging required.
https://www.youtube.com/watch?v=-coXtbKEzYg

good
XtrGamer said:
I have finally found a way. No root or USB debugging required.
https://www.youtube.com/watch?v=-coXtbKEzYg
Click to expand...
Click to collapse
thanks for sharing

[Q] How to access data from locked s6, no wifi, no debugging

Model: SM - G920W8 (Canadian)
I recently purchased an s6 (1 month) and used the fingerprint scanner to secure the device. I made a backup password and made sure it worked and all was well until one day when it all of a sudden stopped working. Normally I leave Wifi on and could solve this issue but as to save battery I had disabled it this time around, silly me. So the fingerprint scanner denied my entry, led me to the backup password which also failed (even though it was correct) and then Wifi was off so Google verification did not work.
Being a new phone, I did not get a chance to turn on USB debugging (this happened 1 week after purchase) so using ADB to turn on wifi was of no use, it did not recognize the device.
Here is what I have tried to do to recover the data up till now:
>I used ODIN to install TWRP on the device.
>With TWRP enabled I made a backup of the data and attempted to connect to adb once again, Using my sisters Galaxy S6 I tested out whether hers worked, just to make sure everything was fine with the drivers and to make sure adb devices recognized her phone: it did.
>I ran ADB devices while in TWRP and it recognized my device, but came back OFFLINE, meaning no commands were able to run.
>I then attempted to run a series of drivers and to access files directly from windows 7 and did not have access permissions to read nor write, thus unsuccessful.
>I went back to ODIN and sought out a stock rom to flash to the partition in order to get access to the backup data i had created using TWRP, as there seems to be methods to flash a rom and maintain the backup data.
> With ODIN i tried this, but was unsuccessful, as it got stuck on "Nand Write start" and would not initialize any transfer with the phone . ( The download mode would not start the progress bar)
>Finally i tried to do it with TWRP but because i have no write permissions, i cannot put anything onto the device for it to run.
I called Samsung about this and they know of the issue and refuse to help me other than a useless factory reset. They knowingly allow users to continue using their fingerprint option for security but do not give warning of its issue, nor do they provide a simple fix like allowing wifi to be turned on from the lock screen. It is a shame that a company like this just allows a known software bug to bother users but doesn't make them aware of it, nor provides a temporary fix while they work on fixing the issue.
I am stuck, and need your help, I have done everything I can think of but can't get anywhere, please help me retrieve my data. Thanks

Wifi is off but how about 4G/LTE data?

If your 4g lte data is working you can use findmymobile(samsung site) and unlock it from there. There's an option to unlock your phone. I came across this issue last month.
Sent from my SM-G920T1 using Tapatalk

Yeah LTE is also off, otherwise google login would have worked.

I can access the WiFi toggle from the lockscreen without having unlocked the phone via FP - although I'm not locked out the phone so wondering if being locked out stops you gaining access to the notification drawer as well

EddyOS said:
I can access the WiFi toggle from the lockscreen without having unlocked the phone via FP - although I'm not locked out the phone so wondering if being locked out stops you gaining access to the notification drawer as well
Click to expand...
Click to collapse
Via FP? well I can indeed access the notification drawer (from the top, right?) but when i enable wifi it asks me to login using the fingerprint.

EddyOS said:
I can access the WiFi toggle from the lockscreen without having unlocked the phone via FP - although I'm not locked out the phone so wondering if being locked out stops you gaining access to the notification drawer as well
Click to expand...
Click to collapse
What does "FP" stand for?

Shady_D said:
Via FP? well I can indeed access the notification drawer (from the top, right?) but when i enable wifi it asks me to login using the fingerprint.
Click to expand...
Click to collapse
sparky2012 said:
What does "FP" stand for?
Click to expand...
Click to collapse
FP - Finger Print

i have the same problem what to do now i dont want to lose data and my s6 edge is not recognising my fingerprint rather asking for a backup password and i forgot the backup password so the wifi or mobile data is switched off and i cant even turn it on what to do now?????

I have the same problem...agree completely "They knowingly allow users to continue using their fingerprint option for security but do not give warning of its issue, nor do they provide a simple fix like allowing wifi to be turned on from the lock screen. It is a shame that a company like this just allows a known software bug to bother users but doesn't make them aware of it, nor provides a temporary fix while they work on fixing the issue."
factory reset is "the only way" to unlock it. Lazy samsung customer service response.
logging in via google is not an option on S6 / new android system anymore so if you forget your pin you're stuffed
this is really poor on samsung behalf to not give warning of the seriousness of using a fingerprint scanner
ha I can't remember (and can't check now) but does it even ask for the pin twice to verify what you entered what was intended?
google use to have a device pin reset but it was removed recently.
I bet heaps of people have this issue.
I am desperate for a solution...

I just registered to help future users having the same problem.
Guys I spent around 15 hours trying to unlock my samsung galaxy s6, and found a solution. You're wellcome because you need google acc+dont need a connection for this to work (worst case scenario).
It didnt recongnize my fingerprints, and my backup password didnt work. I couldnt sign in to my google account since my wifi and mobile data was turned off before the device locked.
This is the solution i found AFTER 15 hours of this madness, you need to be quick:
1) enter wrong backup password 5 times
2) wait 30 secounds countdown
3) enter wrong backup password 5 times
4) wait 30 secounds countdown
5) select sign in with google account
6) enter google account credentials (DONT SIGN IN YET)
7) hold 'wake up button' (home button)
8) press emergency mode and go thru with aggreeing to all it asks you to
9) press TURN ON, and after that press 'sign in' with your google account (where step 6 left off)
If you were quick enough, you will enter emergency mode and you will pass the lock screen, now quit the emergency mode the same way and change your backup password, and write it down this time so this doesnt happen again. You are wellcome.

Thank you, that happened on 4th try, "quick enough" is the key. It appears that it turns on WiFi and mobile data for fraction of a second during the process.

yeah i seen that for a fraction of seconds wifi turns on but how should i unlock i am not done please please help me i dont want to lose my imp data

THANK YOU!!!
Diablola said:
I just registered to help future users having the same problem.
Guys I spent around 15 hours trying to unlock my samsung galaxy s6, and found a solution. You're wellcome because you need google acc+dont need a connection for this to work (worst case scenario).
It didnt recongnize my fingerprints, and my backup password didnt work. I couldnt sign in to my google account since my wifi and mobile data was turned off before the device locked.
This is the solution i found AFTER 15 hours of this madness, you need to be quick:
1) enter wrong backup password 5 times
2) wait 30 secounds countdown
3) enter wrong backup password 5 times
4) wait 30 secounds countdown
5) select sign in with google account
6) enter google account credentials (DONT SIGN IN YET)
7) hold 'wake up button' (home button)
8) press emergency mode and go thru with aggreeing to all it asks you to
9) press TURN ON, and after that press 'sign in' with your google account (where step 6 left off)
If you were quick enough, you will enter emergency mode and you will pass the lock screen, now quit the emergency mode the same way and change your backup password, and write it down this time so this doesnt happen again. You are wellcome.
Click to expand...
Click to collapse
Created an account just so I can thank you :laugh: You've made my night; am so happy and stress-free now!

Bypass setup — is it possible?

I returned my phone to stock UE40. So it's in something like a factory state. I booted up and, as expected, got the language selection screen. After that, I logged into my WiFi network. But I don't want to enter my account info. I just want to get to the home screen. Seems to me I did this very recently, but that may have been on a Nexus device, maybe one with a custom ROM. I don't recall for sure. Anyway, I can't get past that system request for my Google email address. Is there a way to do this where I can just get to the home screen without entering credentials?

maigre said:
I returned my phone to stock UE40. So it's in something like a factory state. I booted up and, as expected, got the language selection screen. After that, I logged into my WiFi network. But I don't want to enter my account info. I just want to get to the home screen. Seems to me I did this very recently, but that may have been on a Nexus device, maybe one with a custom ROM. I don't recall for sure. Anyway, I can't get past that system request for my Google email address. Is there a way to do this where I can just get to the home screen without entering credentials?
Click to expand...
Click to collapse
One method is to NOT enter your wifi...or to tell it to forget it...maybe pull the sim to so no data connection...then it has no option to setup a gmail account and should let you skip it.
Once at home screen you can go into settings,wifi and re-enable your wifi.

famewolf said:
One method is to NOT enter your wifi...or to tell it to forget it...maybe pull the sim to so no data connection...then it has no option to setup a gmail account and should let you skip it.
Once at home screen you can go into settings,wifi and re-enable your wifi.
Click to expand...
Click to collapse
I don't think I was able to get past the wifi request. That's what I tried the first time around. I could reset and try it again. The SIM card is already out.

I reset and tried to bypass the wifi selection. No go. Even if I turned wifi off, the system would just turn it back on and cycle me through language selection and wifi network. Strange. I KNOW I did this recently, but that may have been on a Nexus 6. Probably was.
FWIW, every time I reset the device, it bootloops when I try to boot into the system. Tonight, this happened a few times. First, when I wiped the device, flashed a system image, and tried to boot into it. Then, a few more times when I reset from stock recovery. Each time, I'd power the phone off during the bootloop and then restart. And it would be OK.
No matter. I'm where I need to be. Just wondered if there was a way around wifi selection and and entering an email address.

Sorry to bump this thread,
But I'm having a similar issue. I restored the phone and booted fine. Until I got to the setup page, I couldn't skip it so I login in my credentials and the "protect your phone" prompt appeared and sent me back to the language screen.
I’m restoring it again using the restore software 4.9.2 tool, since I had the 5 percent issue earlier and I’m going to try again and see if I can skip it.
Of course I’m unable to set up usb debugging as I can’t at least accessing the main home screen.
Any advice suggestions are much appreciated.
Thanks.

Never mind got it working and back on Twrp and flashing. Used an old samsung trick and accessed the developer settings that way.

How you did it?

I can tell you what I did to bypass it.
I first got a USB OTG flash drive from the local computer store. I then downloaded an unsigned apk file from any site that has them. Personally I stumbled upon this solution so I had some random "Unlock your phone" APK on the drive. Anyhow, when the phone was on I plugged the flash drive into the phone and tried to open the APK file, it gave me an error message stating that the app was unsigned but then it allowed me to go into security settings, from there I could turn off all of the google verification crap. After I turned off all of the settings, I wiped the cache on the phone, restored it, and it was fixed. No more verification screen.

i HAVE NO ISSUE ON 6045y WITH STOCK FIRMWARE OR WITH DCZ FIRMWARE. I can bypass the setup screen normally.