Related
I've been reading here at XDA, I can find the instructions - no problem.
However, in the WIKI there are a few things I don't understand.
The problem also is that all the posts assume you know what's going on and they start in the middle of a thread.
Then there's advice to use Odin, not to use Odin, use this, don't use this.
Some say unmount the SD card, some make no mention of SD card.
Then there's different backups. I've seen Titanium mentioned.
There's advice to get the latest drivers from Samsung - The phone isn't even in the dropdown list of phones, and the letters for the model don't match.
There's the custom ROM advice. Since there aren't many for this phone as yet - and all you want to do is remove crap, what do you look for?
I have to get rid of that stupid Doubletwist and airsync before I toss the phone!
Z
It is rather confusing isn't it...
In a simple answer....
Find the SuperOneClick zip file in one of those threads in the Dev forum & root the phone.Then go get TitaniumBackup ( Pro Recommended ) & you can remove the bloatware. I'd recommend the Pro Version so you can freez the apps you don't delete.
That's what i did on my SGS4G ( and i am not a experianced modder myself )
One problem. I downloaded superoneclick and NET can't find the runtime file.
I'm using XP and ver 4 of NET. I turned off NOD32 and Online Armor.
Z
zuben el genubi said:
One problem. I downloaded superoneclick and NET can't find the runtime file.
I'm using XP and ver 4 of NET. I turned off NOD32 and Online Armor.
Z
Click to expand...
Click to collapse
Uninstalled NET 4 and put in 3. I can open the file, but NOD32 keeps quarantining RAGE. Says it's a trojan.
I don't really want a custom ROM - but would like some more information on Titanium Backup. The Market won't download to the phone, but going to the market on the phone will let me download.
Thanks,
Zuben
Moved as not android development
zuben el genubi said:
Uninstalled NET 4 and put in 3. I can open the file, but NOD32 keeps quarantining RAGE. Says it's a trojan.
I don't really want a custom ROM - but would like some more information on Titanium Backup. The Market won't download to the phone, but going to the market on the phone will let me download.
Thanks,
Zuben
Click to expand...
Click to collapse
Let it scrub the RAGE file, you need the other one actually to make it work
Which one? PSneuter?
Also some confusion about the Samsung driver. I also have a Galaxy 3. I downloaded Kies and the driver. I downloaded the new driver (did not install it)and stuck it in a folder named Samsung on the Desktop. Kies is in the Samsung folder in programs and I assume that the original driver is in there, too. The driver is listed in Add/Remove programs.
I can either delete Kies or rename that file to something else, and stop Kies from running. So there's 2 drivers, and I suspect they are the same.
Since I can't send a download from the Market on the PC to the phone, I have to download from Market on the phone. I can't install Titanium unless I root, but can I get to Titanium from the phone if I do root?
Thanks
Z
I use linux... so i have no idea what Kies is or does..
zuben el genubi said:
Which one? PSneuter?
Also some confusion about the Samsung driver. I also have a Galaxy 3. I downloaded Kies and the driver. I downloaded the new driver (did not install it)and stuck it in a folder named Samsung on the Desktop. Kies is in the Samsung folder in programs and I assume that the original driver is in there, too. The driver is listed in Add/Remove programs.
I can either delete Kies or rename that file to something else, and stop Kies from running. So there's 2 drivers, and I suspect they are the same.
Since I can't send a download from the Market on the PC to the phone, I have to download from Market on the phone. I can't install Titanium unless I root, but can I get to Titanium from the phone if I do root?
Thanks
Z
Click to expand...
Click to collapse
So which phone are you trying to Root? Samsung Galaxy 3 or Samsung Galaxy S 4G? If your rooting the S 4G you can find the drivers here http://downloadcenter.samsung.com/c...728034640796/SGH-t959_Vibrant_USB_Drivers.zip
I have no experience with rooting with XP but I assume it would be essentially the same steps.
If your looking to do stuff on your Galaxy 3 then please go to this forum
http://forum.xda-developers.com/forumdisplay.php?f=868
and do your research over there.
It’s not that difficult to root the SGS 4G Phone. The first thing you need to do is make sure your phone is communicating with your computer. Install the Samsung USB drivers.(make sure you have the right drivers for your O.S. either 32bit or 64bit) In your phone go into Settings/Applications/Development and make sure you check “USB debugging”. Connect your Tethering cable to your phone. On your home screen you should see “USB Connected” popup on top of your screen. You should be able to press USB connected button from the drop-down menu on the home screen and see the external SD card on the computer now. If that works then Turn off USB storage. (leave “USB debugging” checked) Open NOD32 application from your system tray. Go to Settings and select “Temporarily disable antivirus,” put your password in if prompted. Then Download SuperOneClickv1.7-ShortFuse, expand the file and go to SuperOneClickv1.7-ShortFuse Directory. Run the SuperOneClick App. When it opens don’t change anything and just click “Root” and let it run. It should say rooted when done. Then go to the Market on your phone and get Titanium Backup and install it. It will ask for SuperUser permission and accept that on your phone. If that fails press “Problems” button, Then “Get Busybox”. Install the new Busybox. You may have to close and reopen Titanium Backup again. I would say to download and install ClockworkMod after rooting and before getting Titanium Backup, Except ClockworkMod currently does not work for the SGS 4G Yet. So, skip that step for now. You should be able to backup your phone after this.
nwpro3 said:
It’s not that difficult to root the SGS 4G Phone. The first thing you need to do is make sure your phone is communicating with your computer. Install the Samsung USB drivers.(make sure you have the right drivers for your O.S. either 32bit or 64bit) In your phone go into Settings/Applications/Development and make sure you check “USB debugging”. Connect your Tethering cable to your phone. On your home screen you should see “USB Connected” popup on top of your screen. You should be able to press USB connected button from the drop-down menu on the home screen and see the external SD card on the computer now. If that works then Turn off USB storage. (leave “USB debugging” checked) Open NOD32 application from your system tray. Go to Settings and select “Temporarily disable antivirus,” put your password in if prompted. Then Download SuperOneClickv1.7-ShortFuse, expand the file and go to SuperOneClickv1.7-ShortFuse Directory. Run the SuperOneClick App. When it opens don’t change anything and just click “Root” and let it run. It should say rooted when done. Then go to the Market on your phone and get Titanium Backup and install it. It will ask for SuperUser permission and accept that on your phone. If that fails press “Problems” button, Then “Get Busybox”. Install the new Busybox. You may have to close and reopen Titanium Backup again. I would say to download and install ClockworkMod after rooting and before getting Titanium Backup, Except ClockworkMod currently does not work for the SGS 4G Yet. So, skip that step for now. You should be able to backup your phone after this.
Click to expand...
Click to collapse
This is good information, but what about for Mac users? I was previously able to root my Samsung Vibrant just by installing the update.zip file via CWM. Should Mac users wait for this course or can we make it happen now?
Also, what's the benefit of rooting right now? Just to remove bloatware? There's no custom roms yet, right?
Look at the Unix instructions about associating the USB ID with the Mac. I haven't tried it, but I suspect that is the missing step.
Update: Nope -- According to Google, http://developer.android.com/guide/developing/device.html#setting-up
Setup your system to detect your device.
* If you're developing on Windows, you need to install a USB driver for adb. If you're using an Android Developer Phone (ADP), Nexus One, or Nexus S, see the Google Windows USB Driver. Otherwise, you can find a link to the appropriate OEM driver in the OEM USB Drivers document.
* If you're developing on Mac OS X, it just works. Skip this step.
* If you're developing on Ubuntu Linux, you need to add a rules file...
(Emphasis mine)
Sent from my SGH-T959V using XDA App
I'm wanting to root the 4G. The Galaxy3 was bought unlocked so it doesn't have the crap on it. Like I said, the ROM seems to be ok, it's just the stupid bloatware.
Chamgea said:
This is good information, but what about for Mac users? I was previously able to root my Samsung Vibrant just by installing the update.zip file via CWM. Should Mac users wait for this course or can we make it happen now?
Also, what's the benefit of rooting right now? Just to remove bloatware? There's no custom roms yet, right?
Click to expand...
Click to collapse
Macs are out of my Knowledge base. I've taught PC repair at LAUSD in Ca, but haven't studied the Mac thing. It's something I want to learn, just have not got around to it yet.
I have downloaded the one click and samsung drivers. The program opens fine. But I have read some people getting phones messed up from rooting with this program?
Should I remove the SD card first before rooting?
Does this program work with 2.2 one click for Galaxy?
Thanks!
Hey
the version i used is 1.7 and no problem here ....
I have read somewhere that you should unmount your sd card , well i didnt and still got phone rooted..
i dont see much of problem with it ..... it will take around 5 mins so just be patient.....dont forget to install samsung drivers .... and put phone into developer mode
Can not get it to work.
Yes I did download Samsung drivers succesfuly.
Yes I enabled Debugging mode succesfully
Tried using both One click 1.7 in Rage mode. Tries to work but just cursor flashing and does nothing.
Then used the other One click program that comes up with BLUE SAMSUNG I9000 and has choice to One click 2.1, 2.2 or remove root.
I choose 2.2 and then phone resets like when I used Clockwork on my old HD2.
I chose correctly to install the files.
PHone loads files but then get error code and wont install them. Reads Signiture Verification Failed!
I read others having same issue of phone not letting files install.
Anyhelp!
I know its not rooted as Titanium Backup is not getting root permission..
iceshark said:
Can not get it to work.
Yes I did download Samsung drivers succesfuly.
Yes I enabled Debugging mode succesfully
Tried using both One click 1.7 in Rage mode. Tries to work but just cursor flashing and does nothing.
Then used the other One click program that comes up with BLUE SAMSUNG I9000 and has choice to One click 2.1, 2.2 or remove root.
I choose 2.2 and then phone resets like when I used Clockwork on my old HD2.
I chose correctly to install the files.
PHone loads files but then get error code and wont install them. Reads Signiture Verification Failed!
I read others having same issue of phone not letting files install.
Anyhelp!
I know its not rooted as Titanium Backup is not getting root permission..
Click to expand...
Click to collapse
Down root check fron the market. Just because Titainium is not getting root permission does not mean it's not rooted. It’s not that difficult to root the SGS 4G Phone. The first thing you need to do is make sure your phone is communicating with your computer. Install the Samsung USB drivers.(make sure you have the right drivers for your O.S. either 32bit or 64bit) In your phone go into Settings/Applications/Development and make sure you check “USB debugging”. Connect your Tethering cable to your phone. On your home screen you should see “USB Connected” popup on top of your screen. You should be able to press USB connected button from the drop-down menu on the home screen and see the external SD card on the computer now. If that works then Turn off USB storage. (leave “USB debugging” checked) Then Download SuperOneClickv1.7-ShortFuse, expand the file and go to SuperOneClickv1.7-ShortFuse Directory. Run the SuperOneClick App. When it opens don’t change anything and just click “Root” and let it run. It should say rooted when done. Then go to the Market on your phone and get Titanium Backup and install it. It will ask for SuperUser permission and accept that on your phone. If that fails press “Problems” button, Then “Get Busybox”. Install the new Busybox. You may have to close and reopen Titanium Backup again. BTW this post should be in general.
yeah, i dont suggest you use rage. it took forever for me to root the phone that way. i left it on psneuter and it rooted in about 5 minutes
Sent from beyond the Galaxy
Thanks guys! Yes Rage was the issue. I followed his instructions and left in pnuueter and it worked perfectly! Now my Titanium is rooted and working.
Now if we could just get a good Apsd to let us format the SD card to ext 4 that would be a perfect world!
Thank you.
Moved to proper forum.
menacetwosociety said:
yeah, i dont suggest you use rage. it took forever for me to root the phone that way. i left it on psneuter and it rooted in about 5 minutes
Sent from beyond the Galaxy
Click to expand...
Click to collapse
^ thats what i forgot to tell him to change it lol
Rooted my SGS4G using Superoneclick.
2 things I noticed. Your AV will think that Rage is a virus. NOD32 kept quarantining it. I turned off both AV and FW.
Also, after you install the Samsung USB driver, reboot your computer. I had that "waiting for device" message until I rebooted computer. Then it flew. The driver doesn't offer to reboot, or tell you to.
Z
For those of you who have had trouble with getting the drivers for the Infuse, download this:
[Im new so cant post a link, but goto softpedia.com and search kies. The only kies program available will appear, and download and install that]
It wont recognize your phone, but after you install the program, the appropriate drivers will be present, and the root with SuperOneClick will work immediately.
*remember, the program wont recognize your phone if its plugged in, but that doesn't matter. It will just install the appropriate Samsung_Android drivers your PC needs to recognize the phone in SuperOneClick.
Hope this helps!
Hi , thanks , but ..
why not > http://j.mp/lOx2CB directly from samsung ?
pvillasuso said:
Hi , thanks , but ..
why not > http://j.mp/lOx2CB directly from samsung ?
Click to expand...
Click to collapse
404 Page Not Found
The page you requested was not found.
http://forum.xda-developers.com/showpost.php?p=13895587&postcount=7
posted here.
Phone doesn't exist on my PC.
Nope. Bought the infuse on day one. Installed Kies 2.0.0.11044_11_3. Phone not recognized, installed drivers, learned the truth about Kies. Phone would not be recognized but at least installing Kies made the phone visible to the PC, so I knew I could root if I so desired, read up about rooting and thought I was ready. The phone had other plans.
Decided the other day that I was ready to root. Plugged in the phone but it no longer showed up in Windows. Something about the phones compatibility with my system changed. Tried to install this Kies 2.2.1.11053_99_3 yesterday, reinstalled drivers, activated USB debugging, plugged the phone in started up SuperOneClick and . . . still nothing happened. So I deactivated USB debugging and started over. Followed all the directions in the root posts and and SuperOneClick threads . . .
But somehow between day one and today my Windows 7 64 bit system does not know that the phone is plugged into it.
When I plug the phone into USB the phone asks me how I want to interact with the computer, Kies (Firmware Update); Media player: Mass storage. But the computer shows nothing. Device Manager doesn't list the phone, Windows Explorer doesn't show the phone, Devices and Printers window shows everything that's connected but NOT the phone, it's as if I plugged nothing into the computer. The phone is charging so I know that it's plugged in, but it doesn't seem to be communicating with the PC. I've re-booted, re-installed, reviewed, rewired and re-alized that I have no clue what happened. (Tried different cables, different USB ports different times of the day)
It worked once upon a time, I tried rolling back restore points and disabling my kaspersky 2011, I've followed all rooting instructions in these threads to no avail.
I am now ready to hurl my phone out into traffic to see if that will help, but before I do I'm hoping someone here may have the answer I need.
. . . please . . .
Try removing all instances of the Infuse coming in contact with your system using USBDeView. Also, how does it look in Disk Management? (Start button > search for "Computer Management" > Storage > Disk Management) Does the Infuse show up there as removable storage?
For me, one of the SuperOneClick packages included Windows drivers.
Which is great since SOC is the only reason I needed Windows drivers. (SOC never works in Linux for me for whatever reason...)
All android phones are supported in linux natively.......jus t saying
Nopcodex90 said:
All android phones are supported in linux natively.......jus t saying
Click to expand...
Click to collapse
Well yeah - I've never had to install any drivers for ADB or anything else.
However, for whatever reason, superoneclick and Linux don't get along for me. So the only time I ever have to install drivers is when SOC rooting from Windows.
superweapons said:
Try removing all instances of the Infuse coming in contact with your system using USBDeView. Also, how does it look in Disk Management? (Start button > search for "Computer Management" > Storage > Disk Management) Does the Infuse show up there as removable storage?
Click to expand...
Click to collapse
Tried it, didn't work, oh wait, didn't run USBDeView as administrator, re-tried and uninstalled all instances of Samsung i-997, then tried to plug the phone back in and still nothing.
Also not in Computer Management or Device manager either. Is there a way to uninstall any drivers that I have and then re-install them?
M.
menzoom said:
Tried it, didn't work, oh wait, didn't run USBDeView as administrator, re-tried and uninstalled all instances of Samsung i-997, then tried to plug the phone back in and still nothing.
Also not in Computer Management or Device manager either. Is there a way to uninstall any drivers that I have and then re-install them?
M.
Click to expand...
Click to collapse
I've tried just about everything too, and nothing works to get my 64 bit Windows 7 PC to recognize the Infuse. Finally resorted to AndroidSync for file transfers, which worked fine, but it just makes me angry that I can't make the darn thing connect via USB.
http://www.samsung.com/us/support/downloads/SGH-I997ZKAATT
And select SOFTWARE
Tried that last week. Didn't work for me. The PC does see the device, but never finds any files on it.
Drivers in that link
I was having the same issue mentioned yesterday after loading the Samsung Infuse drivers, where my PC still couldn't see the data on my phone. (I'm also running 64-bit Windows 7 OS.)
Once I loaded the drivers and plugged in my phone, I got the happy little "device drivers installed properly" message and thought I was good to go. Nope. No drives mounted and visible in Explorer.
Under Devices and Printers, I could see SAMSUNG_Android with the unhappy yellow exclamation point. The troubleshooting report just says "Problems with PnP devices."
So I dug into into Device Manager. Under Portable Devices, there were 2 new WPD FileSystem Volume Drivers. Both had the same yellow exclamation points and showed a Device Status of "This device cannot start. (Code 10)."
It turns out Windows 7 wasn't assigning drive letters to the new Android volumes. It creates two disk drives (one with pictures, videos, and ringtones and the other with music, external SD, and media). If you right-click on the drives and choose "Change Drive Letter and Paths," click Add, and assign it an unused drive mapping, it will then appear in Explorer.
Incidentally, the SAMSUNG_Android still shows up with its unhappy yellow exclamation point in Devices and Printers. So I imagine there's supposed to be a more user-friendly way that doesn't expose the true internal file structure when it's all working properly. But in the meantime, I can at least access my phone data via USB.
Are you sure your not trying to root GB with superoneclick? Superonclick only works with Froyo.
neon_skunk said:
Are you sure your not trying to root GB with superoneclick? Superonclick only works with Froyo.
Click to expand...
Click to collapse
Dude look at the date
neon_skunk said:
Are you sure your not trying to root GB with superoneclick? Superonclick only works with Froyo.
Click to expand...
Click to collapse
Hey there..
View attachment 876861
thanks
Nopcodex90 said:
All android phones are supported in linux natively.......jus t saying
Click to expand...
Click to collapse
Yep...
Ubuntu / Linux FTW!
Hmmm, native on Linux you say? Don't have to battle with windows composite USB hub bullcrap you say? I shall try this.
Sent from my SAMSUNG-SGH-I997 using xda premium
I originally posted this inside the Glorious Overdose V2 thread, but decided to post here as well.
For some reason my computer won't recognize my Sidekick when I plug it in via usb. I do have the samsung drivers installed and it will read my friends Samsung Droid Charge just fine, but when I plug my Sidekick in it comes up saying "USB Device Not Recognized". So far I've tried uninstalling and reinstalling the drivers from the device manager to no avail. Wondering if anyone has an idea as to what it could be. I've also tried googling the solution and everyone says to just uninstall and reinstall the drivers and it should work. Now the phone is not plugged into a USB Hub, extender, or case, it is plugged directly into a usb port on the mother board.
PC Specs just in case:
Motherboard - Gigabyte GA-970A-D3
OS - Windows 7 Ultimate x64
CPU - AMD FX-4100
Memory - 8GB DDR3 1066
Phone:
T-Mobile Sidekick 4G running Glorious Overdose V2
Nothing added just the rom and some apps/games.
I have tried with USB Debugging on and off, either way does not work.
Update: I have since tried Kies mini, as well as the drivers found on Softpedia. Neither of those worked, so I just got done reformatting and reinstalling Windows hoping that would work. At first it did not, right now I am running windows update to see if that was the issue, I'll update of what the outcome is.
Update: After installing all available Windows updates it's still not recognizing the phone. Now no matter what it's saying it's an Unknown Device. Even after I try and do a manual driver update and tell it to look in the folder with the driver files from Softpedia. I'm at a complete loss now.
If anyone has any idea's please let me know.
What mode do you have the phone in? Settings->Applications->USB Settings. It should be in Mass Storage if you want to access its SD Card.
Maybe put another rom on the sd card and flash something else, I don't think it would be a rom issue but it would be worth a try?
Sent from my SGH-T839 using XDA
Jax184 said:
What mode do you have the phone in? Settings->Applications->USB Settings. It should be in Mass Storage if you want to access its SD Card.
Click to expand...
Click to collapse
It's set to USB Debugging. But even then, it should read as something else other then Unknown Device when I plug it in. I have tried plugging it in and selecting Mass Storage, still comes up as Unknown Device.
HewettBR said:
Maybe put another rom on the sd card and flash something else, I don't think it would be a rom issue but it would be worth a try?
Sent from my SGH-T839 using XDA
Click to expand...
Click to collapse
I've thought about that, and from everything I can see it's either the ROM or the drivers. So we'll see...I'll probably try a different ROM and see what happens.
I suggest turning USB debugging off and mass storage on, for how you'll be using it. And recall that you have to change this stuff with the USB cable unplugged.
I've tried that, and after talking with the T2 Technical Support from Samsung for 45min today, the only option left is to send the phone in to get worked on. Though, I'm going into the T-Mobile store and see if they can't replace the phone or give me a loner while this one is out getting repaired.
More info request.
Can you provide us with the names and links to the drivers you have tried?
DuctTapedGoat said:
Can you provide us with the names and links to the drivers you have tried?
Click to expand...
Click to collapse
Kies Mini - http://www.samsung.com/us/support/owners/product/SGH-T839HABTMB
Softpedia - http://drivers.softpedia.com/get/MOBILES/Samsung/SAMSUNG-USB-Driver-1480.shtml
As well as the Samsung Vibrant drivers from both of those sites.
Samsung SideKick 4G Drivers
www DOT filedropper DOT com FWSLASH sk4gx64drivers
This is the exact drivers I pulled off of my own machine, I ran into massive issues with those same driver packages, especially in getting the initial root to take with a few different utilities designed to grant sudo/su/root access, and these are the drivers I have running currently, just pulled off my own machine. I run Windows 7 x64, but as well, there should be no reason why these drivers wouldn't work on a x86 machine and/or OS.
NOTE : I apologize it's not a proper link, but I'm unable to post a raw link until I hit my 8th post. I will come back and fix this after I hit that 8th post, but until then it will be ghetto-bypass HTML.
DuctTapedGoat said:
www DOT filedropper DOT com FWSLASH sk4gx64drivers
This is the exact drivers I pulled off of my own machine, I ran into massive issues with those same driver packages, especially in getting the initial root to take with a few different utilities designed to grant sudo/su/root access, and these are the drivers I have running currently, just pulled off my own machine. I run Windows 7 x64, but as well, there should be no reason why these drivers wouldn't work on a x86 machine and/or OS.
NOTE : I apologize it's not a proper link, but I'm unable to post a raw link until I hit my 8th post. I will come back and fix this after I hit that 8th post, but until then it will be ghetto-bypass HTML.
Click to expand...
Click to collapse
Thank you, I tried unpacking them to a folder on C:\ went into Device Manager, right clicked on the Unknown Device, Update Driver Software..., Browse My Computer for Driver Software, Set the search to C:\, and still saying Unknown Device is the best driver software for it. No idea why it's doing this.
Proper Driver Update
What is going on is that Windows is seeing a more recent signature file attached to the SK4G drivers on your computer (I don't believe anything at all is wrong with your device) than the working ones there.
First, in Add/Remove Programs, uninstall the Samsung Kies and Samsung Driver pack you installed earlier. Now...
Go into on your PC:
://windows/system32
And locate the same file names, cut them all, and paste them in a temporary folder you create, preferably on the desktop or something similar. You may not find every file, and that's okay, just the ones you can find. Next, you will be wanting to paste the driver files from the package I uploaded. Now, turn off Automatic Updates, so it doesn't automatically install drivers upon connection. Reboot the computer, double check and make sure Automatic Upates are off when you log back on. Now, connect the device and see if it gives you the same results. By removing the old drivers which don't work, you'll be able to force it to the ones we know work, and you /should/ have success. As well - USB data debugging active and activating connection for data transfer via the notification pulldown menu would be the best way to do this initially.
Would I be looking in c:\windows\system32\drivers for the same file names as the ones you packed up?
Ok, so the only one I could find in the drivers folder was modem.sys. But it will not let me move/replace the one that's already in there. It's telling me access is denied, same thing when I try and set the permissions it will not let me. I am logged in as an Administrator, as well it says it when I log in as THE Administrator account. So yeah...
Cool - modem.sys is a stock one that is shared with the device, so that's fine.
With the other two programs uninstalled, the old drivers uninstalled, and forcing it into those by pasting them into //win/sys32/drivers you should be in business. Hmm. You can try UnlockRoot.com's device rooter - I know they have an auto driver detector in their program. As well, you can try SuperOneClick, but I don't remember if they do or no. What about going in from the Recovery menu and toggling USB? Anything wierd going on in the /mounts? What about ADB shell access from the Android SDK on Windows?
DuctTapedGoat said:
Cool - modem.sys is a stock one that is shared with the device, so that's fine.
With the other two programs uninstalled, the old drivers uninstalled, and forcing it into those by pasting them into //win/sys32/drivers you should be in business. Hmm. You can try UnlockRoot.com's device rooter - I know they have an auto driver detector in their program. As well, you can try SuperOneClick, but I don't remember if they do or no. What about going in from the Recovery menu and toggling USB? Anything wierd going on in the /mounts? What about ADB shell access from the Android SDK on Windows?
Click to expand...
Click to collapse
I tried plugging the phone in, still showing up as Unknown Device. Tried UnlockRoot.com's program, no change. Installing the Android SDK right now, as well as I tried deleting the INFCACHE.1 file, and no change with that either. Once I'm done installing the Android SDK I'll redelete the INFCACHE.1 file and restart and try the phone again.
I did go in and check the mounts in recovery and they were set to:
UNMOUNT CACHE
MOUNT DATA
UNMOUNT SDCARD
UNMOUNT SYSTEM
Thank you for your help so far.
UPDATE: So after installing the Android SDK, deleting the INFCACHE.1 file, restarting, and then plugging the phone in, comes up and says the USB Device is Not Recognized. Then goes to search the preconfigured driver folders, and fails to install the driver for Unknown Device. And ADB Devices shows no devices as well(didn't think it would, but yeah).
UPDATE: So after using my friends phone as a conduit to throw the Stock Odexed KJ2 w/ Root(http://forum.xda-developers.com/showthread.php?t=1328698) onto my SDCard and flashing that the phone seemed to go into a soft brick at pre-boot screen(where it says SAMSUNG T-Mobile blah blah blah). Mind you this would freeze before it was even able to get into recovery. So I took it into T-Mobile and they are doing a manufacturer warranty replacement. So hopefully this next phone will be able to connect to the computer and be read correctly.
Hello everyone and thanks in advance for anyone replying to my dumb question.
Today I was preparing to use the Aroma Toolkit to restore my phone to a basic stock. I placed it in a folder called ".rom" on the internal sdcard so it would appear at the top. (can you believe it?) I have CWM Red and it doesn't see ".rom" as it is now hidden. (I guess) Unfortunately, I already wiped AND formatted "system" so I can't boot the phone up to change the folder to something more sensible. I cannot restore from Odin OR Heimdall because my phone won't show up on ANY PC and it only shows "Unknown USB Device." I've been up and down with that one too. Also, I tried to put the toolkit on the external sdcard both as is and as update.zip but it says there are no files. I think my only way(s) out of this would be to Odin or Heimdall, if I can get either working again, or if there is a way to get the CWM Red to see that hidden ".rom" folder.
ANY help at all would be greatly appreciated.
Thanks for reading this.
folders and files that begin with a dot are hidden in linux systems like android. you are seeing an unknown device because you dont have samsung drivers installed. you should be able to go into mounts and storage and select usb mass storage or something like that and it will mount as a mass storage device where you can rename the file in windows where that doesnt show as a hidden file.
if you wiped system, if you turn off your device, you might not be able to get back into recovery and youll have to use odin or heimdall. you can download the samsung drivers from http://d-h.st/xEG and when you are in recovery mode, go to device manager and select from the list of device and choose samsung composite device or something like that i dont remember.
next time you want a folder to show at the top of the list, i think you can start it with an underscore. i could be wrong about that though. you can try it out and see.
I don't recall if red CWM has the mount as usb storage option. If not...
Next step is getting the drivers on your PC. Easiest option from there is Odin or Heimdall - unless you want to download the android SDK and use adb shell to rename the directory.
Underscore should work for sorting...
fwiw I use exclamation points.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Thanks for the reply! Although I did have the Samsung drivers installed with Kies mini, I removed Kies and installed the drivers in the link you gave me but no luck. USB used to work fine in Win as well as Lin but it stopped suddenly. I am able to get into both recovery and download mode fine but I can't go anywhere from there. I tried to "mount sd_ext" under mounts and storage in recovery, hoping to access the aroma toolkit file from there, but I get a can't mount error that says /dev/block/mmcblklb1p2 (file exists). "mount USB" doesn't help either. I really did it this time....
Thanks again for the input
well, if youre not going to download mode to run odin, and you cant do usb mass storage in red cwm, and you want to do it from recovery, you need to choose samsung adb device in device manager. then you need adb and can do adb shell and run "mv /sdcard/.rom /sdcard/_rom"
mrpectate said:
Thanks for the reply! Although I did have the Samsung drivers installed with Kies mini, I removed Kies and installed the drivers in the link you gave me but no luck. USB used to work fine in Win as well as Lin but it stopped suddenly. I am able to get into both recovery and download mode fine but I can't go anywhere from there. I tried to "mount sd_ext" under mounts and storage in recovery, hoping to access the aroma toolkit file from there, but I get a can't mount error that says /dev/block/mmcblklb1p2 (file exists). "mount USB" doesn't help either. I really did it this time....
Thanks again for the input
Click to expand...
Click to collapse
sd_ext in red recovery does not refer to the external sd card (even though you would think it does from the name)
For compatible drivers, remove all Samsung phone related drivers from your system and install the first driver package located here (not the mini-kies one):
http://www.samsung.com/us/support/owners/product/SGH-I997ZKAATT
Some things that may help:
http://forum.xda-developers.com/showthread.php?t=1982306&page=2
Also, turn off auto driver install in Windows 7 - could be your PC is deciding what is best for you before you can install working drivers:
Go to Control Panel > System > Advanced System Settings > Hardware > Device Installation Settings > "No / Never"
Then install the driver, then connect your phone. Once the driver and devices are fully installed you can change the above setting back to what it was or to "No / Install" (that's where I usually leave it)
Good luck
Well I sincerely appreciate all the help from you guys, and Zen Arcade, thanks for the toolkit that brought me back from disaster quite a few times. I tried all of your suggestions, but it seems like I might have a hardware failure which occured before all this. I was able to connect to USB fine and out of nowhere it just wouldn't anymore. That was OK. I still rom-hopped along with straight to phone rom aquisition, but then I made a mistake. One I have learned from. I'm not able to get the phone to show up AT ALL. I even tried a clean install of WinXP then the drivers from Zen's post, and Nicky's Win7 laptop. I also tried several versions of Linux. Only Mint's Gparted could see it as /sdb/ with a corrupted partition. I even gave Haiku's Drive Probe a shot. Jack of Clubs, I tried the SDK shell but it just scans and sees nothing. I just think that the USB thing is roadblocking any hope of saving this heap. Recovery is there, download mode is there, but the connection required to utilize either of those is gone.
Again, I truly appreciate the help.
Well I've been trying to get CWM to see the Infuse Toolkit (and various roms) on external_sd but it keeps saying:
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(Invalid argument)
E:Can't mount /sdcard
I've tried 4 different microSD's formatted as FAT, FAT32, and I used SDFormatter (I saw someone recommend that somewhere). I really see this as the very last ember of hope for this phone before I let it go.
Any ideas?
BTW, my CWM is v2.5.1.3 - Voodoo lagfix
Thanks again and in advance.
Infuse GB recovery menu will not see external SD card.
If you can get adb working - connection to your PC - you have some options. From adb there are commands that will allow copying files from PC to phone ... also from external to internal sd card depending on which kernel you are running. You could also rename your hidden folder too.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Thanks again for your continued help Zen. I just can't get it recognized (in a constructive way) by anything. I tried Santoku linux today and nothing. I've just been beating my head with this thing. Well here it is: CWM is accessible, as is download mode, and it charges fine, but no PC connection. When it was given to me, the glass was cracked, but it always worked fine for me. It's in a Ballistic case. If your interested in it, I'll be happy to send it to you, even if it's just for parts. I loved this phone, and had a lot of fun with it. (thanks to this community and all of its' contributors) I think it's time to move on.
I'm gonna start looking at a phone with a good selection of custom roms cuz I just love flashin' 'em
Let me know if your interested in this phone Zen.