Ok so I have tried on another thread that kind of went dry mainly cause I was MIA....but now I am back and have done some more reading up and think it is safe to say rooting and trying customer ROM's is not for me...lol I pretty much messed up a new Galaxy Tab 2 7' brand new only after a few weeks trying to root it. I had another thread link below:
http://forum.xda-developers.com/showthread.php?t=1834368&page=2
But I did not get anything to work right. At this point I am really just looking to get the tablet working. I don't really care what firmware rooted or unrooted...i just want to be able to use it....do some more research and and maybe join the rooting community again when I get a Galaxy S3.
I'd appreciate any help. I am pretty stuck right now!
Go into Download mode "power" plus "down volume", then up volume. Use ODIN to load this:
http://forum.xda-developers.com/showthread.php?t=1645295
ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=581913...
You will need driver from Samsung Keis install for P3113
http://www.samsung.com/us/support/owners/product/GT-P3113TSYXAR
FYI - I needed to load CMOC10-Kernel to get my tab to stop boot looping when I flashed JB AOKP
bark777 said:
Go into Download mode "power" plus "down volume", then up volume. Use ODIN to load this:
http://forum.xda-developers.com/showthread.php?t=1645295
ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=581913...
You will need driver from Samsung Keis install for P3113
http://www.samsung.com/us/support/owners/product/GT-P3113TSYXAR
FYI - I needed to load CMOC10-Kernel to get my tab to stop boot looping when I flashed JB AOKP
Click to expand...
Click to collapse
Worked like a charm....you made it simple! Thanks!
Continous boot loop on tab 2 p3113
My problems are kind of different from all the others I have read. Yes it is similar that it boot loops. But mine freezes at different areas in boot mode. This is driving me crazy and I am spending way too much time and effort trying to fix it. Hopefully you can help.
I don't really know for sure if the android os was 4.1.1 or 4.1.2 or some other rom but it did state in download mode that it was original and not custom rom.
I received this tab from ebay and it is new never used, but somehow whoever had it probably tried to flash it and now I received it with a continuous loop. They stated that it stuck in SAMSUNG logo. I found it true but it also stuck other places as well. I did do a reset first before I attempted to flash it.
I did the Odin flashing.I found the 4.2.2 xar file HOME_XAR_P3113UEUCMK3_1978026_REV04_user_low_ship.tar.md5 and did according to instructions. But that didn't work. It did boot into android but it didn't stay there very long and rebooted itself. I couldn't stay more than 20-30 seconds and it would reboot itself or freeze at various places in android. I also hard reset it. Still same thing. It would also freeze on the first samsung logo tab 2 screen and also at the blue circle with samsung logo. It was different every time. I would have to hold down the on button until it rebooted. It also stalls or freezes during Android upgrading... Optimizing app at various number stages sometimes it goes thru that and then to the next phase of installing apps then it freezes again. I cannot get it to work if I try to upgrade via wireless upgrade to samsung. it will freeze even before it downloads the upgrade file.
I then flashed back to the original xar file P3113UECLK7_P3113XACCLK7_XAC which is 4.1.1 That worked a little better, but it freezes and also the sound chatters when it freezes on bootup you know, when the samsung sound comes on then the blue circle.
Finally I tried to recover or flash from the recovery mode using the upgrade from a sdcard. using the original 4.1.1 xar file. It hewlped a little but still doing the continuous boot loop at different stages but it gets to the Android is upgrading... more often. It freezes always now.
So I don't know what else to do. You mentioned a CMOC10-Kernel to load, how does one go about doing that and what are the steps.
Thanks in return if you can suggest things.
Wayne
Ok, a long story here.
My son dropped his Samsung Ace2x s-7560m phone. The screen cracked. I bought a replacement screen through a reputable seller on ebay.
After installing the screen, the s7560 starts, but freezes on the Samsung screen, then boots over. This goes on and on.
I rooted the phone and flashed a 7562 stock rom to the device. The only difference between the two devices is that the 7562 is a dous phone.
The flash went well, and after rebooting, the phone boots up. It starts out as a 7560, then the screen flickers and becomes the 7562 duos.
The phone boots up. I can surf online using wifi, and the screen reacts as it should for the whole screen.
Now, when I try to call out the call does connect, but I can't end the call. The phones network does not work at all.
I have tried to enter into the recovery and can , but only by using adb. The key combos don't work. I can get the phone to boot into download mode.
The bootloader still shows as a 7560, and the software shows as a s a 7562. I think what is happening is the seller from ebay has sold me the duos screen instead of the 7560. He has refunded the money, and told me to keep the screen, so now it has become a bit of a challenge that I will defeat.
I am wanting to get the phone working. I have found a rom called kyleopen, but all the download links are removed or not working. I can put other files like cwm into the download file. When I try and access the sd card, I get an error that it can't mount it.
So..
Is there a custom rom that works on both the 7560 and the 7562 that can be installed using odin?
or:
Is there a way to flash the bootloader to be a 7562 model?
Is there a way to correct the screen issue..whereas I can still use a 7560 rom, and the screen will be detected.
As stated, I am trying to run the 7560 with a 7562's screen. I am guessing the digitizer is a bit different from device to device, and that the 7560 is just not recognizing the screen as being there. I have tried to flash the stock 7560 rom back onto the phone, but get the same issue..won't boot past the samsung screen.
Is there a file to alter to get the 7560 to accept the screen as the right one? I know the screen does work with the phone, and think the network issues I am having is because the duos feature of the rom flashed to the device.
Anybody have any ideas?
freakybaby said:
Anybody have any ideas?
Click to expand...
Click to collapse
Maybe too late.
In a call, usually if you can´t finish the call is because the proximity sensor is not working and didn´t detect that you separate the phone from your face, or when you disassembly and reassembly the phone you forgot the plastic mount of the infrared detector.
Did you get the two lines working? I mean, both phones are exactly same board and rest of the spares, but s7562 uses two sim cards, in a s7560 flashed with s7562 firmware are both sim cards works?
WBR
freakybaby said:
Ok, a long story here.
My son dropped his Samsung Ace2x s-7560m phone. The screen cracked. I bought a replacement screen through a reputable seller on ebay.
After installing the screen, the s7560 starts, but freezes on the Samsung screen, then boots over. This goes on and on.
I rooted the phone and flashed a 7562 stock rom to the device. The only difference between the two devices is that the 7562 is a dous phone.
The flash went well, and after rebooting, the phone boots up. It starts out as a 7560, then the screen flickers and becomes the 7562 duos.
The phone boots up. I can surf online using wifi, and the screen reacts as it should for the whole screen.
Now, when I try to call out the call does connect, but I can't end the call. The phones network does not work at all.
I have tried to enter into the recovery and can , but only by using adb. The key combos don't work. I can get the phone to boot into download mode.
The bootloader still shows as a 7560, and the software shows as a s a 7562. I think what is happening is the seller from ebay has sold me the duos screen instead of the 7560. He has refunded the money, and told me to keep the screen, so now it has become a bit of a challenge that I will defeat.
I am wanting to get the phone working. I have found a rom called kyleopen, but all the download links are removed or not working. I can put other files like cwm into the download file. When I try and access the sd card, I get an error that it can't mount it.
So..
Is there a custom rom that works on both the 7560 and the 7562 that can be installed using odin?
or:
Is there a way to flash the bootloader to be a 7562 model?
Is there a way to correct the screen issue..whereas I can still use a 7560 rom, and the screen will be detected.
As stated, I am trying to run the 7560 with a 7562's screen. I am guessing the digitizer is a bit different from device to device, and that the 7560 is just not recognizing the screen as being there. I have tried to flash the stock 7560 rom back onto the phone, but get the same issue..won't boot past the samsung screen.
Is there a file to alter to get the 7560 to accept the screen as the right one? I know the screen does work with the phone, and think the network issues I am having is because the duos feature of the rom flashed to the device.
Click to expand...
Click to collapse
try this install firmware for s7560 then flash cwm recovery and after that boot into recovery wipe data/factory reset then go to advanced menu in recovery and then wipe dalvick cache . reboot phone. now it should boot with no problem
sadman2 said:
try this install firmware for s7560 then flash cwm recovery and after that boot into recovery wipe data/factory reset then go to advanced menu in recovery and then wipe dalvick cache . reboot phone. now it should boot with no problem
Click to expand...
Click to collapse
So I have reflashed with the 7560 rom. I am back to a boot loop. I can't get to recovery..I was only able to do that in ADB, but can't boot up for adb right now.
ANy other ideas..or ways I can get into recovery. I can get the download screen using the buttons, but not the recovery.
Means reflashed the rom using a stock firmware and ODIN?
Sent from my beloved HTC One S using (most time buggy) Tapatalk
freakybaby said:
So I have reflashed with the 7560 rom. I am back to a boot loop. I can't get to recovery..I was only able to do that in ADB, but can't boot up for adb right now.
ANy other ideas..or ways I can get into recovery. I can get the download screen using the buttons, but not the recovery.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=45767157#post45767157
here have all the faq for this phone and the links. download daverq18 root pack and follow the instructions. then you should succesfully boot into cwm recovery
I was given a samsung(clone) model sm-g9008 a while back which is now stuck at the android splash screen on startup.
Was working fine for months then one morning and battery went flat and on reboot would not get past this screen, it vibrates occasionly on it.
I have not been able to make a mtk backup because it does not recognise the phone.
After a bit of searching online I was able to obtain a stock rom for it, and after a few very frustrating hours messing with usb drivers I was able to get flash tools to see it, but now I get a D-ram error when trying to flash it!
Has anybody got any ideas on how to fix this?
I am very poor so cannot afford a new phone, if I can't get this working again I will be buying a Alcatel Onetouch, very crap phone! Please help!
Ok
I think i have done it this time, my tells me not to mess around but i cant help it, anyway i decided to root my lenovo s856 to remove some of the preloaded apps etc and generally improve performance.
ok after rooting the phone it will not now boot up, i get the lenovo start up screen but then the screen goes blank bt seems to be back lit.
version was kitikat 4.4.2
Can anyone help me what i need to do to get this rebooted. with regards to flashing etc.
help
I have an old glaxaxy ace which i decided to root and i kind of failed. By failed, i mean that when i attempt to boot up the phone with the power button, the screen gradually goes from the samsung logo to white- white bars appear and slowly fill the screen going up to full brightness. I fiddled around a bit, trying to install the stock os that came with the phone (i think it was jelly bean 4.12), and i managed to delete recovery mode. No idea how, but it simply shows the samsung logo and then turns off when i try to get into it. I have never rooted or flashed which is why i was trying on this old galaxy ace (that is like £50 nowadays).
Anyway, how can i recover recovery mode -lol-. My laptop doesn't recognise it (before it recognised it as an external storage device) and i don't renember what the model is.
Wiryfuture said:
I have an old glaxaxy ace which i decided to root and i kind of failed.
Click to expand...
Click to collapse
Which Galaxy Ace, is it? And more details on the phone if you can