Database Info

bricked s3 clone mtk6577 microsim phone help

http://product.madeinchina.com/wholesale-product-image/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-FWVGA_14003970.shtml
i have the phone of the above link. i bought this phone I9300 (S3) MTK6577 Android 4.0 OS 3G 4.6 'FWVGA Screen GPS with microsim slot and after i restore to factory defaults i lost imei.I couldnt recover imei and then i tried to flash a new rom with flashtool.Now phone dosn't boot and screen is dead ,only red led is on and the led of buttons.
Maybe something wrong with the preloader and the rom i flashed.What can i do? do you have a new rom to flash with flashtool?Can you send me instructions how to unbrick this phone?Can you send a link of rom to flash and also a flashtool for it?Does anybody have the same phone that can upload the back up of his rom?
i have attached also a photo so you recognise the model of the phone which takes microsim
You can find this phone also here..
http://product.madeinchina.com/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-39-FWVGA-Screen-GPS-Wifi-Smart-cell-phone-FREE-SHIPPING-_14003970.shtml#ask
and here
http://forum.china-iphone.ru/viewtopic.php?f=70&t=24648&p=905244#p905244
Hope somebody have the same phone to help because now its bricked!

http://www.youtube.com/watch?v=CZ35mOvRpm4 Procedure on how to get the firmware use version 3 universal firmware across all MT657X chipsets. (January 2013)
http://forum.xda-developers.com/showthread.php?t=1982587 use this SP flash tool!.
http://www.chinaecarts.com/samsung-...nch-mtk6577-android-41-16gb-phone-p-3095.html firmwares are on this page. check what type of S3 clone you have... (I have a 99 percent replica)
I have reflashed a S3 clone using this method. I'll create a comprehensive guide if I have the time.
All i'm asking is hit the Thanks button if this helped you

problem loading
i downloaded the version micro_sim_s3_quadcore_dualcore_firmware_20130107 and when i try to flash it with sp flash tool i get the error that the phone is mtk6577 and the file is for 6575.Look the photo i have attached and let me know.
Do i do something wrong?
Beer Brand said:
http://www.youtube.com/watch?v=CZ35mOvRpm4 Procedure on how to get the firmware use version 3 universal firmware across all MT657X chipsets. (January 2013)
http://forum.xda-developers.com/showthread.php?t=1982587 use this SP flash tool!.
http://www.chinaecarts.com/samsung-...nch-mtk6577-android-41-16gb-phone-p-3095.html firmwares are on this page. check what type of S3 clone you have... (I have a 99 percent replica)
I have reflashed a S3 clone using this method. I'll create a comprehensive guide if I have the time.
All i'm asking is hit the Thanks button if this helped you
Click to expand...
Click to collapse

try version 3 first the universal one. then you can play with the others by updating through stock recovery. i bet you have a dual core one. press vol down , ok and power button at the same time on boot and go to version. if it says MAUI on the list then we have the same clone
Sent from my Nokia 5110 using Tapsilog and Kape

Beer Brand said:
try version 3 first the universal one. then you can play with the others by updating through stock recovery. i bet you have a dual core one. press vol down , ok and power button at the same time on boot and go to version. if it says MAUI on the list then we have the same clone
Sent from my Nokia 5110 using Tapsilog and Kape
Click to expand...
Click to collapse
Do you mean the one called ''micro_sim_s3_quadcore_dualcore_firmware_20130107'' ?
I tried to flash with sp flash tool but i get error!Not compatible!When it flashes i get error ''the target platform is 6577s00''
I cant load it!
Why do you mean by saying universal?

https://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
try this link this goes to all mtk657x chipsets.
Sent from my Nokia 5110 using Tapsilog and Kape

i already said!i have downloaded but i cant load it on phone i get error see my previous post!\Look post 3 of this thread please LOOK the photo and let me know what wrong!?

soulfreem said:
i already said!i have downloaded but i cant load it on phone i get error see my previous post!\Look post 3 of this thread please LOOK the photo and let me know what wrong!?
Click to expand...
Click to collapse
Try to read the chinacarts website because you download the one for quadcore micro_sim_s3_quadcore_dualcore_firmware_20130107 the link i provided you is the the one that worked for me.
Version 3:
For micro sim version
(When you make upgrade the phone success,the boot screen will start on"welcome"logo,dial"*#2013#"or"*#0825#" then press"OK" reboot the phone,the boot logo will changed to Samsung Logo)
Firmware( Released on 07,Jan,2013) this firmware universal for MT6575,MT6577,MT6589 CPU:https://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
Now mind your manners and be thankful and READ! we are not obliged to help out. Did you tried out this UNIVERSAL FIRMWARE! if you do then it never worked then there is nothing we can do to your expensive paperweight.

s3 clone
can this fix my s3 clone mtk6577?

Beer Brand said:
Try to read the chinacarts website because you download the one for quadcore micro_sim_s3_quadcore_dualcore_firmware_20130107 the link i provided you is the the one that worked for me.
Version 3:
For micro sim version
(When you make upgrade the phone success,the boot screen will start on"welcome"logo,dial"*#2013#"or"*#0825#" then press"OK" reboot the phone,the boot logo will changed to Samsung Logo)
Firmware( Released on 07,Jan,2013) this firmware universal for MT6575,MT6577,MT6589 CPU:https://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
Now mind your manners and be thankful and READ! we are not obliged to help out. Did you tried out this UNIVERSAL FIRMWARE! if you do then it never worked then there is nothing we can do to your expensive paperweight.
Click to expand...
Click to collapse
Is the link the same for the quadcore and dualcore?
Thank you for your help

zeldaaxe1 said:
can this fix my s3 clone mtk6577?
Click to expand...
Click to collapse
i also have issue with my s3 clone mtk6577... its no longer turning on after trying to odex it.. tried to flash the firmware and thats when the phone no longer turning on.. please help me.. im trying to flash it again using the flash tool but stuck in 0% what do i need to do?

I have the same problem. S3 micro sim clone MTK6589, new firmware tried (chinaecarts.com/s3firmware20130320.rar ), then the phone not booting.
I just contacted with Chinaecarts.com, they tried to solve the problem but not working.
Also tried with the universal firmware, but it sad I've MTK6577 phone, not MTK6575.
If I will have fresh news, will post it.
(seller said, I should send the phone back, and they will fix it.)

I tried with this:
H.tps://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
It is theoretically for the MTK6577 and MTK6589 as well. Got the previous result: "Platform error. The target platform is MT6577_S00."
I think there is a solution for the blank screen problem:
- need a Flash Tool. (on the link above you can find it, or on the link in my previous post)
- need a firmware for MTK6577 micro sim card.
I tried with many sdcard firmware versions, but no effective result.

Hi,
1, You need to know what is exact model of your s3 mtk6577. There are many s3 mtk6577 models in the market. Different s3 mtk6577 is made by different manufacturer, so the ROM is definitely different.
2. After you get the right ROM, then flash your phone by using flash tool SPMultiPortFlashDownloadProject

Bricked MTK6577
The image of the S3-micro-sim-version-20121210 this with corronpidos files, and the method that you should have done to retrieve your appliance was using the recover instead of SP tools because the files are not in rar. SP standard my phone so can enter META mode and nothing more.

soulfreem said:
http://product.madeinchina.com/wholesale-product-image/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-FWVGA_14003970.shtml
i have the phone of the above link. i bought this phone I9300 (S3) MTK6577 Android 4.0 OS 3G 4.6 'FWVGA Screen GPS with microsim slot and after i restore to factory defaults i lost imei.I couldnt recover imei and then i tried to flash a new rom with flashtool.Now phone dosn't boot and screen is dead ,only red led is on and the led of buttons.
Maybe something wrong with the preloader and the rom i flashed.What can i do? do you have a new rom to flash with flashtool?Can you send me instructions how to unbrick this phone?Can you send a link of rom to flash and also a flashtool for it?Does anybody have the same phone that can upload the back up of his rom?
i have attached also a photo so you recognise the model of the phone which takes microsim
You can find this phone also here..
http://product.madeinchina.com/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-39-FWVGA-Screen-GPS-Wifi-Smart-cell-phone-FREE-SHIPPING-_14003970.shtml#ask
and here
http://forum.china-iphone.ru/viewtopic.php?f=70&t=24648&p=905244#p905244
Hope somebody have the same phone to help because now its bricked!
Click to expand...
Click to collapse
It looks I have the exact model of yours. I am trying to update the firmware by entering the recovery (I suppose it is {vol up + power}). But my external sdcard is not mounted to pick the rom from.

I hope this may help you? I had the same problems as you with the same phone after rooting it I deleted the original rom as it went into a loop and would not start so I started installing every firmware I can find and install, I got one which works BUT! no English , it boots English then goes into several languages but not English it is HDCI9300 rom. I googled it as no one seems able or do not want to help although I have asked several times in many different ways. I hope this will get your phone at least to boot up, I used sp flash as this rom will not let you do anything with the sd card (if it does you need to translate one of the languages)? I hope this helps, if not you have lost nothing:fingers-crossed:

Hello. I have a similar problem with yours. A friend of mine has a 100% visual clone (MTK6577) with the same sticker under the battery like in the first post, he tried to flash it, but he messed up something, and then he brought it to me completely DEAD . No charging, no PC connection - nothing... I tried many button combos, and accidentally i found out that if i connect the phone without battery, press and hold VOL+, VOL- & POWER for a few seconds, the PC detected the mediatek com port , installed the drivers without problem, and now the real problems begins - the ROM. I tried all of the roms from chinaecarts but without success, first i couldn't flash the thing, and after downloading several roms from chinaecarts, and finally flashed it and guess what - no LCD :silly: . So i tried combining different files from different roms, and now i'm at a point where i can turn on the phone, screen goes white, but the phone boots, it makes the vibration after the boot process completes, and after that the phone is responding to touches (it vibrates), lock/unlock works, PC detects USB Mass Storage Device, USB Composite Device and MTK65xx Android Phone. I also noticed that in the FW packages i downloaded there are some files that aren't flashed (i think) like for example the kernel.img so i was wondering if i can flash it manually? Please someone help, share some FW links, i can't find anymore...

can anyone help with this?? or even identify which s3 clone the phone is from the first post... i have tried many "solutions" for clone 6577 and NONE works.. I have scoured the internet for possible solutions and nothing..

help please!
brad_maliik said:
can anyone help with this?? or even identify which s3 clone the phone is from the first post... i have tried many "solutions" for clone 6577 and NONE works.. I have scoured the internet for possible solutions and nothing..
Click to expand...
Click to collapse
Try this (remove spaces): https:// hotfile.com/dl/207667730 /e94a926/6577_9300_650.zip. html

[Q] Feiteng H7100 bricked MT6577 unbrick?

Hi, I have a big problem with my new Phone Feiteng H7100! After I flashed the ROM (from needrom), nothing happens on the phone! Everything went as described until the green circle. Nothing now … when connected to the PC appears a USB / network device name: Alcatel Single RNDIS interface, nothing more happens.
Can someone help me here? Please
jemmars

Hello everyone,
can anyone help me here really? I've also, quite diligently search through the forums for possible solutions, but I have not found anything. Please, please help me with my phone ... where I still have birthday ... your help I would be today's greatest gift!

Did you tried to reflash with another ROM?
Maybe this will help you: http://forum.xda-developers.com/showthread.php?t=2186116
Please post your experience.

hi, can anyone help me, i have a feiteng h7100, totally bricked, not turn it on, the computer dont recognize, is a dead phone, i flash it with sp flashtool first time says ok, but no turn it on, so i flash it again, in the middle of flashing says error and the cpu dont recognize any more my phone, any ideas..

never flash DSP_BL and preloader. as long as the device is recognized on your PC, its not "dead" othewise you can try the "testpoint" methode, but not all motherboards have one.

[Q] Bricked Kross GY-601 Chinese Tablet

Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..

Sooo,
You probably don't have proper drivers, use PDANet ones, they work even with obscure tablets.
You tried to port CWM or flash?
It's not bricked since your computer detects it
Last thing, do you have a backup recovery image or another recovery image that works so you can get it back up?
Daniel

I was dumb enough not to do any recovery image backups..
Also.. I ported cwm then flashed it with dd just poped the .img into the recovery block.. but since I didn't compile it properly when I adb reboot recovery.. It got into a boot loop.. so I tried to fix it but broke it even more... So then I tried re-writing the firmware for generic 4.1.2 chinese tablet.. but that messed it up to the point were it only shows as M6-CHIP.. i can only turn on and off.. nothing else.. no boot no screen light up nothing..

I can help you BUT....
loureirom_ said:
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Click to expand...
Click to collapse
Even i am having the same device on its stock rom and kernel so i guess i can help you i was into rooting and upgrading it but didnt do it as i was waiting for a backup device so if i brick it i dont have to wait to buy a device but i am stupid and dont know how to take a backup of the stock rom. If you will help me know how to do that i can help you in return by uploading the stock rom and sharing the link.:highfive:

[Q] Celkon A119Q - Hard Bricked my Daughter's Phone :( Help

Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.

Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...

N'ayam Amarsh'e said:
Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...
Click to expand...
Click to collapse
he was trying to install a custom ROM and flashed the PRELOADER first...the process stopped halfway through and the phone has been bricked ever since.. :crying:

rakave said:
Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.
Click to expand...
Click to collapse
did you try to restock it.. installing a stock rom is the last option if available.. if the phone is not even turning on, check battery.. make sure your battery is charged..
and at last.. you could just try taking it to the service center if it's in warrenty.. but make sure it doesn't turn on.. don't tell them you were flashing.. they will never know.. hope it help in any way..
btw check out my signature...

R7 PlusM doesn't boot properly anymore

Hi there, I have tried to find a solution today for this issue but I can't find anything useful anywhere .
Last night I received another update via OTA 151115 and proceed to install it as the earlier ones didn't work. Surprisingly this one worked and after restart my phone didn't had any trace of google apps on it, try to install google play, framework and so but the phone says it's not compatible with google (Big time). Then I went to the bootloader to perform a wipe/erase everything and here's when the problem began, it was stuck in the screen that says optimising applications (the one before starting the setup) and after half an hour unattended the phone restart itself one after another, like in a loop.... From this point on, I haven't been able to power on the device anymore.
It was bought through a third party seller from China, already contacted them and waiting for an answer...
Any clue about what can I do to use my phone again?
Update: I can see the oppo logo after pressing volume up plus power buttons for around 15 seconds but it shows for less than a second the screen it appears when it's updating the software and then it switches itself off... Is this a sign of possible recovery in some way?
just downloaded the last 151115 official update from the oppo community forum but I've got a problem. I can not enter the fasboot or recovery mode because the phone is like trying to install something and it constantly switches itself off... The day this happened, I had two files in my root directory, one was the few update and the other was a full Google thing in the same format than the fw file, I'm afraid I selected the wrong one and that's why the phone went crazy. I guess if there's some way to cancel that attempt to update the wrong file or reset that thing in some way, I'd be able to start over but I can't find anything grgrgr
By the way, the last ota update allowed google maps to work flawlessly and also Instagram, two of my biggest concerns with the phone
I'm even trying to contact oppo service to send the thing and sort it out that way xx
Cheers
Pedro

I've just contacted Oppo Customer Service in Europe to see if they have any solution for my problem as I can't make this thing to start and the battery also doesn't seems to be charging though... No response for the moment, just an automated one confirming the reception of my enquiry
Should I start thinking about my lovely new phone as my new paper weight?

peterpanda1970 said:
I've just contacted Oppo Customer Service in Europe to see if they have any solution for my problem as I can't make this thing to start and the battery also doesn't seems to be charging though... No response for the moment, just an automated one confirming the reception of my enquiry
Should I start thinking about my lovely new phone as my new paper weight?
Click to expand...
Click to collapse
No, no you have a chance to save your phone. If you have to R7 plus M Oppo Chinese version, I can help you. I also had this problem, but he was able to solve it. My Skype: ed_mobstyle.

Hi mate, thanks for the answers. Yes it is the China mobile version "M" I don't have Skype I'm afraid grgrgr
Cheers
Pedro

I was able to fix this problem fairly easily.
First I entered recovery (press Power + Volume Down when the phone is booting up)
Then from the device menu I installed a ROM, you want to download the version you last used. (MAKE SURE IT IS FOR THE OPPO R7 PLUS M)
After installing the stock rom, it will go into installation and have you set up your phone.
After you installed the ROM, download OPPO tools v 1.6.5
Open Oppo Tools and root your phone this will take a few minutes.
After you have rooted your device open Oppo Tools again and select Unlock Google Mobile Services (this too me two weeks to figure out).
Let the phone restart, after it is finished, you should have basic google functionalities (Playstore and Frameworks).
Now since you are rooted, it means that your phone will not download any further OTAs and you will have to install them as ROMs, you can do so by repeating the above process, but I'm not sure of the functionality of Oppo Tools past the most current version.
I cant post links to provide you to where the ROM files and Oppo Tools are at this moment
The roms will be located on the "[ROM][STOCK] Official R7 Plus Roms | R7Plus, R7PlusF, R7PlusM [15 Sep 2015]" of Oppo Fourms
The Oppo Tools will be located when you google "OPPO Tools apk" on your computer and it will take you to the thai version of Oppo Fourms follow the link there to download the apk

Hi mate, thanks for your answer but my problems is that I can't enter the recovery mode cause the phone try to install something and then it switches itself off
I've tried to connect the phone to my laptops and sometimes they recognised it as Qhsub something and I can't find anywhere this driver. Then all the softwares I've got ask me for a scatter file which I don't have....
Also trying to contact support from the brand. For now just send them my data and the phone's imei and now waiting for the magic response... They are excessively slow in their answers!
Thanks so much anyway
Cheers
Pedro

hi mate I guess un the malysia oppo community you can fin the drivers and every things about oppo r7pkusM

sollitair said:
hi mate I guess un the malysia oppo community you can fin the drivers and every things about oppo r7pkusM
Click to expand...
Click to collapse
Just checked in and didn't find anything but the bloody oppotools lol.
Cheers mate!

so please if you still with the same problem let me know I'll try to write an email directly to you with all
links you need for it.
[email protected]
best of luck

Still at the same point mate! The thing keeps on trying to install something and switches itself off. My windows laptop runs on win10, the other is a Mac so I guess useless for this matters... The battery runs out faster than ever even being off. Disaster! Lol
I would really appreciate your help
Cheers
Pedro

This is a video I made to explain how this thing try to boot and it never makes it further...
https://www.youtube.com/watch?v=2LNiWODlUd0

Hi matr
believe me I have just coming back from oppo office and I show them your video and what they said '' you have to change it with the guarantee you have''.
it clear now for me and I state that I had the same problem all what I did is installing the oppo drivers on my PC boot on fastboot mode give some commands to unlock it and tjen I flash the original recovery from oppo then tje coloros was installed and updated as well before flashi'g again TRWP recovery and right now I''m writing to you from my r7plusm it's work smothly rooted with the same original oppo rom coloros.
I hope that your just missing something and let me know to to follow you step by step on this.
cheers P

sollitair said:
Hi matr
believe me I have just coming back from oppo office and I show them your video and what they said '' you have to change it with the guarantee you have''.
it clear now for me and I state that I had the same problem all what I did is installing the oppo drivers on my PC boot on fastboot mode give some commands to unlock it and tjen I flash the original recovery from oppo then tje coloros was installed and updated as well before flashi'g again TRWP recovery and right now I''m writing to you from my r7plusm it's work smothly rooted with the same original oppo rom coloros.
I hope that your just missing something and let me know to to follow you step by step on this.
cheers P
Click to expand...
Click to collapse
Hi mate, my problem is that my computer detects the phone as qhsusb_bulk and I've tried every single file I found with that name and nothing changes, well, the device name from unknown to com1, com2... up to com13 I have seen.... Other thing is that I can't enter the fastboot mode or recovery mode neither. I wish I had an oppo service near home but I live in Uk, now I'm trying to get service from oppostyle and waiting for an answer. To be honest with you, I'm really annoyed with all this, never had a problem with bricked androids or iphones until I met this "guy" lol
Cheers
Pedro

I'm really sorry dude I hope I can help you as I did for mine it was quit simple with the same driver problems,so try to uninstall all drivers you have for oppo and install the one I shared with you taken from my ohone directly that the only way you can give any commands to your phone to switch to fastboot mode even if the problem still present

when I try to install the driver on my win10 laptop it says this...

Using an old win7 laptop I managed to install the bloody Qhsub driver and now the phone appears in the com ports under the name Qualcomm HS-USB QDLoader 9008 (COM4) does this means the phone really doesn't exist?

Update to this thread, I can't do anything until I find a proper driver for the phone which actually is recognised by my laptop as Qhsub_bulk and I can't bloody find this anywhere at least for making 6795 processors or specifically for this model...
Any clue?

peterpanda1970 said:
Update to this thread, I can't do anything until I find a proper driver for the phone which actually is recognised by my laptop as Qhsub_bulk and I can't bloody find this anywhere at least for making 6795 processors or specifically for this model...
Any clue?
Click to expand...
Click to collapse
No need panic ))) I've sent you a set for recovery your device )))) Good luck

ed_mobstyle said:
No need panic ))) I've sent you a set for recovery your device )))) Good luck
Click to expand...
Click to collapse
Hi mate, thanks for your help. Tried to open the link you sent me but it says it's not available anymore grgrgr
Cheers
Pedro

peterpanda1970 said:
Hi mate, thanks for your help. Tried to open the link you sent me but it says it's not available anymore grgrgr
Cheers
Pedro
Click to expand...
Click to collapse
Hi, please check now